SLW V1.7 By MTOverview
This indicator is a high-probability signal generator built on three core pillars of price action: Fixed horizontal price zones (7 Static Lines), Macro trend direction via Higher Timeframe (HTF) analysis, and Micro-structure indecision through the Doji candlestick pattern. By waiting for all three conditions to align, this tool dramatically reduces false signals and helps you trade with the institutional "confluence."
1. The 7 Static Levels (The Framework)
The indicator plots seven predefined static horizontal lines across your chart. These levels act as the ultimate support/resistance grid. Price action interacting with these lines is given top priority, as they represent major historical inflection points where reversals or violent breakouts are statistically likely.
2. Higher Timeframe Trend (The Filter)
To ensure you are never fighting the macro trend, the indicator evaluates the market direction on a user-selected higher timeframe (e.g., 4H or Daily). It acts as a guardian filter: it will only allow Buy signals if the HTF structure is bullish and Sell signals if the HTF structure is bearish, keeping you aligned with the dominant money flow.
3. The Doji Candle (The Trigger)
The final entry catalyst is the Doji candlestick—a pattern signifying extreme indecision and exhaustion of the current move. The indicator scans for Dojis that form strictly in the immediate proximity of the 7 static levels. This signals that the market is pausing exactly at a key area, setting the stage for a potential reversal.
Trading Logic (Entry Signals)
· 📈 LONG (BUY) Signal: Price is trading near a Static SUPPORT line + HTF Trend is BULLISH + A Doji forms at that level.
· 📉 SHORT (SELL) Signal: Price is trading near a Static RESISTANCE line + HTF Trend is BEARISH + A Doji forms at that level.
Customizable Inputs
· Levels: Manually configure the 7 price levels to match your specific asset (Forex, Crypto, Stocks, or Indices).
· Trend Settings: Select your preferred Higher Timeframe (e.g., 15m, 1H, 4H, Daily) and the smoothing method for trend detection.
· Doji Sensitivity: Adjust the body-to-range ratio to define how "strict" the Doji detection should be.
Best Practices
This indicator performs optimally on lower-to-mid timeframes (5-minute to 1-hour) while utilizing a 4-Hour or Daily HTF filter. Always look for price rejection (long wicks) alongside the Doji to confirm the signal before entering a trade. No indicator is infallible—please use proper risk management and stop-losses. Indicator
SLW By MTOverview
This indicator is a high-probability signal generator built on three core pillars of price action: Fixed horizontal price zones (7 Static Lines), Macro trend direction via Higher Timeframe (HTF) analysis, and Micro-structure indecision through the Doji candlestick pattern. By waiting for all three conditions to align, this tool dramatically reduces false signals and helps you trade with the institutional "confluence."
1. The 7 Static Levels (The Framework)
The indicator plots seven predefined static horizontal lines across your chart. These levels act as the ultimate support/resistance grid. Price action interacting with these lines is given top priority, as they represent major historical inflection points where reversals or violent breakouts are statistically likely.
2. Higher Timeframe Trend (The Filter)
To ensure you are never fighting the macro trend, the indicator evaluates the market direction on a user-selected higher timeframe (e.g., 4H or Daily). It acts as a guardian filter: it will only allow Buy signals if the HTF structure is bullish and Sell signals if the HTF structure is bearish, keeping you aligned with the dominant money flow.
3. The Doji Candle (The Trigger)
The final entry catalyst is the Doji candlestick—a pattern signifying extreme indecision and exhaustion of the current move. The indicator scans for Dojis that form strictly in the immediate proximity of the 7 static levels. This signals that the market is pausing exactly at a key area, setting the stage for a potential reversal.
Trading Logic (Entry Signals)
· 📈 LONG (BUY) Signal: Price is trading near a Static SUPPORT line + HTF Trend is BULLISH + A Doji forms at that level.
· 📉 SHORT (SELL) Signal: Price is trading near a Static RESISTANCE line + HTF Trend is BEARISH + A Doji forms at that level.
Customizable Inputs
· Levels: Manually configure the 7 price levels to match your specific asset (Forex, Crypto, Stocks, or Indices).
· Trend Settings: Select your preferred Higher Timeframe (e.g., 15m, 1H, 4H, Daily) and the smoothing method for trend detection.
· Doji Sensitivity: Adjust the body-to-range ratio to define how "strict" the Doji detection should be.
Best Practices
This indicator performs optimally on lower-to-mid timeframes (5-minute to 1-hour) while utilizing a 4-Hour or Daily HTF filter. Always look for price rejection (long wicks) alongside the Doji to confirm the signal before entering a trade. No indicator is infallible—please use proper risk management and stop-losses. Indicator
Volatility Squeeze Ignition [MarkitTick]💡 A multi-dimensional analytical engine designed to detect periods of extreme market consolidation and validate the subsequent directional expansion. By measuring the mathematical relationship between standard deviation and average true range, this tool identifies equilibrium zones where price action compresses and stores kinetic energy. Rather than reacting blindly to every volatility spike, the script employs a sophisticated filtration matrix that evaluates underlying volume delta, higher timeframe macro-trend alignment, directional movement strength, and immediate candlestick morphology. This creates a rigorous framework that authenticates breakout signals, ensuring that traders only focus on high-probability momentum ignitions supported by definitive market conviction.
✨ Originality and Utility
Standard volatility indicators often generate breakout signals without providing any insight into the underlying market participation or the structural validity of the move. This system distinguishes itself by integrating a state-tracking memory engine that monitors the cumulative buying and selling volume specifically during the compression phase. This continuous volume delta tracking allows the system to pre-assess the directional bias before the actual breakout materializes. Furthermore, it incorporates a dynamic risk-to-reward projection matrix mapped directly onto the chart. It calculates stop-loss zones and sequential take-profit levels based on the exact width of the preceding volatility squeeze. This creates a completely self-contained analytical environment that bridges the critical gap between signal generation and precise trade management, eliminating the need for discretionary target plotting and manual risk calculations.
🔬 Methodology and Concepts
● The Volatility Squeeze Engine
The core mechanics rely on the precise interplay between Bollinger Bands and Keltner Channels. A squeeze state is formally activated when the Bollinger Bands contract entirely within the boundaries of the Keltner Channels. This condition signifies that the market's standard deviation has fallen below its historical true range, indicating a profound period of low volatility and liquidity resting. The system mathematically locks in the exact width of the bands at the onset of this compression. An ignition signal is mathematically validated only when the price decisively breaks outside the Bollinger Bands, provided the bands have begun to expand.
● Volume Delta Profiling
While the squeeze state is active, the script meticulously aggregates the volume of up-closing bars versus down-closing bars. This builds a cumulative delta sum. When a breakout triggers, the system references this stored delta to ensure that the directional break is fully supported by the actual volume flow accumulated during the consolidation phase, preventing false breakouts engineered by low-liquidity spikes.
● Multi-Dimensional Filtering
The breakout validation process is governed by a rigorous confluence matrix:
Higher Timeframe Alignment: Evaluates a simple moving average on a higher resolution chart to ensure the breakout trades strictly in the direction of the macro trend, utilizing a secure, non-repainting data referencing architecture.
Trend Strength Evaluation: Integrates the Average Directional Index to demand a minimum trend strength threshold, actively filtering out choppy, sideways market noise.
Candlestick Morphology: Evaluates immediate, candle-by-candle price and momentum interaction. The real body of the breakout candle must constitute a specific percentage of the total high-to-low range, confirming definitive and immediate market conviction rather than relying on lagging divergences.
Volatility Expansion: Compares the current channel width against the locked width from the start of the squeeze, ensuring the breakout is accompanied by a genuine expansion in market volatility.
🎨 Visual Guide
● Chart Overlays
Active Squeeze Background: A subtle blue vertical background highlight appears when the volatility squeeze is actively compressing.
Breakout Backgrounds: A vibrant teal background signals a confirmed bullish squeeze ignition, while a vivid crimson background highlights a bearish squeeze ignition.
BB Basis Line: A solid blue line representing the central moving average of the standard deviation channel.
KC Lines: Muted, semi-transparent lines mapping the upper and lower boundaries of the true range channel.
● Trade Management UI
Entry Line: A dashed blue line marking the exact closing price of the validated breakout candle, accompanied by a dynamic price label.
Stop Loss (SL) Line: A solid, thick crimson line indicating the invalidation level. Depending on user settings, this is positioned either at the opposite channel edge or calculated via an ATR multiplier. A red translucent fill connects the Entry to the SL, visualizing the exact risk zone.
Take Profit (TP) Lines: Three distinct dashed teal lines representing sequential profit targets, derived from Fibonacci extensions of the locked squeeze width. A green translucent fill highlights the total reward zone from the Entry to TP3.
● Information Dashboard
A comprehensive heads-up display anchored to the chart corner providing real-time telemetry on the system's state:
Squeeze Status: Displays whether the compression is currently ACTIVE or OFF, alongside a graphical progress bar.
Sqz Bars: A numerical count of how long the current squeeze has been compressing.
BB Width %: A visual gauge showing the current width of the standard deviation channel relative to its basis.
Delta Bias: Highlights the dominant accumulated volume direction (BULLISH, BEARISH, or NEUTRAL) colored dynamically in teal or crimson.
R:R Metrics: Real-time calculation bars showing the exact risk-to-reward ratios for all three take-profit targets based on the current active signal.
Filter Diagnostics: Individual status readouts for HTF Trend, ADX, Body Strength, and Volume Confirmation, allowing traders to instantly see which filters are passing or failing.
📖 How to Use
● Identifying Setups
Traders should monitor the chart for the appearance of the blue active squeeze background. During this phase, direct your attention to the Dashboard to monitor the "Delta Bias" and "Sqz Bars" count. A longer squeeze accompanied by a strong, building Delta Bias indicates a high-probability impending breakout. Wait for a confirmed candle close that breaks the channel limits, triggering the vibrant teal or crimson background.
● Managing Trades
Once an ignition signal fires, the script automatically projects the entry, stop-loss, and three take-profit levels. Traders can use the SL line to place their initial protective stop. As price approaches TP1, traders may consider scaling out a portion of their position and trailing their stop loss to the Entry line to secure a risk-free trade. The graphical risk and reward fills visually assist in quickly assessing if the projected trade meets your personal risk parameters before execution.
⚙️ Inputs and Settings
● Core Parameters
BB Range: Defines the calculation range for the standard deviation channel.
BB Mult: The standard deviation multiplier determining the width of the outer bands.
KC Range: Defines the calculation range for the average true range channel.
KC Mult: The multiplier dictating the width of the Keltner Channels.
Min Squeeze Bars: The absolute minimum number of consecutive compressed bars required before a valid ignition can be fired.
● Filters
Require Volume Confirmation: Toggles the volume delta tracking engine.
HTF Trend Filter: Activates the macro-trend alignment requirement, preventing counter-trend breakout signals.
ADX Trend Strength Filter: Enables a strict momentum threshold requiring the market to be actively trending.
Candle Body Strength Filter: Enforces a structural rule where the breakout candle's body must meet a minimum size relative to its wicks.
● Trade Tools & Alerts
SL Mode: Allows traders to select between a structural stop loss at the opposite channel edge or a volatility-based ATR stop.
TP1, TP2, TP3 Fib: Customizable Fibonacci multipliers that project the profit targets based on the original width of the market squeeze.
Dashboard Settings: Toggles the visibility and positional anchoring of the telemetry table.
Alert Actions: Advanced JSON-formatted string inputs allowing traders to define precise webhook payloads for entries, exits, and target hits, enabling seamless automated execution.
🔍 Deconstruction of the Underlying Scientific and Academic Framework
● Volatility Compression Theory
The fundamental architecture of this script is rooted in the cyclical nature of market volatility, which oscillates continuously between periods of extreme contraction and aggressive expansion. By cross-referencing standard deviation against an absolute measure of true range, the algorithm quantitatively identifies the inflection points where liquidity providers pull back and the market reaches a state of unnatural equilibrium. The mathematical locking of the channel width captures the precise kinetic energy stored during this phase, applying principles of mean reversion and standard deviation expansion to project the statistical probability of the ensuing vector move.
● Order Flow and Delta Mechanics
To move beyond simple price derivatives, the system incorporates an approximated order flow model through its volume delta profiling. By segmenting traded volume into up-closing and down-closing aggregates during the compression state, the script builds a proxy for aggressive market participation. This mechanism relies on Auction Market Theory, assessing the imbalance between aggressive buyers lifting the offer and aggressive sellers hitting the bid. When the mathematical breakout aligns with the underlying delta accumulation, the script confirms that the price displacement is driven by genuine institutional or macroscopic participation, significantly reducing the statistical likelihood of a mean-reverting liquidity sweep.
⚠️ Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. We expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion. Indicator
Library
Fibonacci Extension BreakoutFibonacci Extension Breakout
This indicator automatically draws Fibonacci extension zones on higher-timeframe (HTF) breakouts. Instead of manually drawing Fibonacci retracements after every swing, the script detects when price closes beyond the previous HTF bar's high or low, and then plots seven colored zones (boxes) extending from that breakout range using the 0, 1, 1.272, 1.786, and 2.272 Fibonacci ratios (and their negative-side equivalents).
How it works?
On each new HTF period (default: Daily), the script checks whether the current HTF close has broken above the prior HTF high (bullish) or below the prior HTF low (bearish).
If a breakout occurred, it takes the new period's high/low as the base range and calculates Fibonacci extension levels outward from that range using a custom scaling function.
Each level pair (e.g., 1–1.272, 1.272–1.786, etc.) is rendered as a colored box, updated live as the HTF period develops, and closed off once the period ends.
A configurable history limit (Box History) controls how many past breakout zones remain visible on the chart.
HTF data is requested with lookahead=off (the safe default) to avoid look-ahead / repainting bias, so historical results reflect only data that was actually available at that time.
Inputs
Timeframe: the higher timeframe used for breakout detection (default: Daily)
Box History: number of past breakout zones kept on the chart
Border Color: box border color
How to use it?
Add the indicator to any chart. When a breakout box appears, the mid-zone (0–1) represents the breakout range itself; zones above/below represent potential extension targets or reaction areas traders commonly watch after a breakout.
This tool visualizes potential price targets after a range breakout — it does not generate buy/sell signals and should be combined with your own risk management and trade plan. Indicator
Permutation Entropy Regime [Jayadev Rana]Permutation Entropy Regime
OVERVIEW
Permutation Entropy Regime is an original open-source tool that measures how ordered or random recent price action is, and turns that into a simple market-state read. Instead of moving averages or momentum, it borrows an idea from information theory called permutation entropy (the Bandt-Pompe method) to score the "predictability" of the market, then classifies the current bar into one of five regimes.
It is not a buy/sell signal generator. It is a context and filter tool that tries to answer one question: is the market currently structured enough to trend or swing, or is it behaving like random noise where most systematic edges break down?
HOW IT WORKS
1. Ordinal patterns. Over a rolling window of closes, the script looks at every group of three consecutive closes and records their rank order (which is highest, middle, lowest). With three values there are six possible orderings.
2. Permutation entropy. It builds a histogram of how often each of the six orderings appears in the window, then computes the Shannon entropy of that distribution and normalizes it to a 0-1 scale. A low value means a few orderings dominate (structured, repeatable behavior); a high value means all orderings appear about equally (random-walk-like behavior).
3. Predictability. Predictability is reported as (1 - normalized entropy) x 100. Higher means more ordered.
4. Structure Rank. Because raw predictability sits in different ranges on different symbols and timeframes, the script percentile-ranks the current predictability against its own recent history (Structure Rank Lookback). This adaptive 0-100 Structure Rank is the main line and the basis for the regime decision, so the tool self-calibrates to each market.
5. Drift bias. A separate term measures the net share of up versus down closes across the window (-1 to +1). It is used only to label a structured regime as Up, Down, or Range.
REGIMES
- Structured Up: Structure Rank at or above the Structured Level and drift bias positive.
- Structured Down: Structure Rank at or above the Structured Level and drift bias negative.
- Structured Range: Structure Rank high but drift near zero (ordered but sideways or mean-reverting).
- Neutral: Structure Rank between the two levels.
- Random / Chop: Structure Rank at or below the Chop Level.
INPUTS
- Core: Entropy Window (window length for the ordinal-pattern histogram) and Predictability Smoothing (EMA applied to the raw score).
- Regime: Structure Rank Lookback (adaptive percentile window), Structured Level and Chop Level (the two cutoffs), and Drift Bias Threshold (how strong the directional tilt must be to call Up or Down).
- Visuals: color price bars by regime, shade the indicator pane by regime, show the dashboard and choose its corner.
- Colors: one color per regime.
WHAT IT PLOTS
- Structure Rank line (0-100), colored by the active regime.
- Raw Predictability line for reference.
- Dashed Structured Level, Chop Level, and a midline.
- Optional regime background in the pane, and optional regime coloring of the main price bars.
- A dashboard showing the regime, Structure Rank, Predictability, normalized entropy, drift bias, and how many bars the current regime has lasted.
ALERTS
Five bar-close alertconditions: entered Structured Up, entered Structured Down, entered Structured Range, entered Random / Chop, and a generic Regime Changed. They evaluate on confirmed bar close.
HOW TO USE IT
This is a context filter, not a signal by itself. Common uses:
- Take your own trend or breakout setups mainly while the market is in a Structured Up or Structured Down regime, and stand aside or reduce size in Random / Chop.
- Prefer mean-reversion or range tactics in Structured Range.
- Combine the regime with your existing entries rather than acting on the regime alone.
MARKETS AND TIMEFRAMES
It is symbol- and timeframe-agnostic because the Structure Rank adapts to each market's own history. It runs on intraday and higher timeframes. Note that most liquid instruments are close to random at short intraday scales, so absolute Predictability is often low; the Structure Rank is what makes the reading comparable and actionable across markets.
CALCULATION AND REPAINTING NOTES
- All calculations use closed-bar data (close and historical closes). Values for the most recent, still-forming bar update until that bar closes, which is normal for any close-based indicator; historical values do not repaint after a bar has closed.
- The embedding dimension is fixed at 3 (groups of three closes). Ties between equal closes are resolved with a consistent rule and are rare on most instruments.
- There are no higher-timeframe requests and no future-looking access.
LIMITATIONS
- It measures structure, not direction quality; a structured regime is not a guarantee of follow-through.
- Permutation entropy of order 3 is a coarse estimate; very small windows are noisy and very large windows are slow to react.
- On extremely low-volatility or illiquid data, repeated equal closes can bias the pattern histogram.
- Like all indicators, it describes past and current behavior and does not predict future prices.
This script is open-source under the Mozilla Public License 2.0. It is provided for research and educational purposes only and is not financial advice. Test any tool on your own markets and settings before relying on it.
Open-source script
In true TradingView spirit, the creator of this script has made it open-source, so that traders can review and verify its functionality. Kudos to the author! While you can use it for free, remember that republishing the code is subject to our House Rules.
bluealgocapital
Disclaimer
The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by TradingView. Read more in the Terms of Use.
Indicator
Prop Firm Risk Guard I EonMetrics Prop Firm Risk Guard
Prop Firm Risk Guard is a risk dashboard and position size calculator for prop firm challenge and funded-account traders. It keeps the numbers that decide whether your account survives — the Daily Loss Limit, the Max Drawdown floor and the size of your next trade — on one screen, derived from one shared account state.
Stated plainly up front: TradingView cannot see your broker account. Your balance and today's P&L are MANUAL inputs — you type them in, the script does the limit math and the sizing math. Entry, Stop and Take Profit are also yours: the script never calculates or suggests any of them, it only draws the levels you decided on and does the arithmetic. The only live, price-driven element is the Entry/SL/TP lines and their cross alerts. No signals, no trade suggestions.
🔶 WHY ONE SCRIPT
A challenge usually fails through one compounding mistake: a trade sized without checking how much of today's loss allowance is actually left, so a routine stop-out becomes a daily breach. That check only works when the daily limit, the drawdown floor and the position size are computed from the same account state at the same moment — which is why they are one dashboard instead of separate tools you would have to cross-reference by hand. The last sizing row makes the link explicit: it compares one full stop-out against your remaining daily room and turns red BEFORE the trade if it doesn't fit.
🔶 WHAT IT DOES
Daily Loss Limit — enter your firm's daily loss % and its basis (starting or current balance). Today's P&L is a NET number, wins offset losses. Because firms word this rule two ways, both models are supported: Floor (the day has a fixed equity floor, so intraday profit adds room before it — the common model) and Hard Cap (the allowed loss is fixed, profit does not extend it). The table shows the remaining allowance in money and a status ladder: OK → CAUTION (50% used) → DANGER (80%) → BREACHED.
Max Drawdown — Static (floor fixed below the starting balance) or Trailing (floor follows the equity high-water mark). Shows the floor as an actual money level and the buffer above it, with the same status ladder.
Position sizing — risk per trade as % of balance or a fixed amount, planned entry (or live price) and stop. Returns the size in units, the forex conversion to 100k lots and the notional value. A Contract Multiplier input keeps the math correct on futures (e.g. ES = 50, GC = 100) as well as stocks, crypto and forex.
Take Profit (optional) — add your own TP price to see the R:R ratio and the money gain if it hits, using the same calculated size. If the TP sits on the wrong side of entry for your direction, the cell flags it instead of showing a meaningless ratio.
Entry / SL / TP lines — your levels drawn on the chart, with three alert conditions that fire when price crosses any of them.
🔶 HOW TO USE
1. Settings → Account: starting balance, current balance; high-water mark for trailing-drawdown firms (0 = auto).
2. Prop Firm Rules: copy the exact numbers and models from your firm's dashboard.
3. During the session, keep Today's P&L updated — the daily section only knows what you tell it.
4. Before a trade: set risk, entry and stop; read the size; make sure the last row is not red.
5. Optional: add a TP for R:R, and set alerts on the three price-cross conditions.
🔶 SETTINGS
Account (balances, high-water mark) · Prop Firm Rules (daily loss % + basis + Floor/Hard Cap, max drawdown % + Static/Trailing, profit target) · Today's P&L · Position Sizing (risk mode, entry/stop/TP, contract multiplier, lines toggle) · Table (position, text size).
This tool does the arithmetic of your firm's rules and your own trade plan. It does not know your account, does not predict anything and does not tell you what to trade.
Part of the EonMetrics toolset.
Indicator
Indicator
Devtrader Custom Chart Information# Custom Chart Motto
**Custom Chart Motto** is a lightweight visual indicator that displays a personalized message at the bottom center of your TradingView chart.
Below the motto, it automatically displays the current **instrument** and **chart timeframe**, helping you create a clean and personalized trading workspace.
## Features
- Custom motto or trading reminder
- Automatic instrument and timeframe display
- Optional exchange name
- Customizable text colors
- Adjustable font sizes
- Default or monospace font
- Regular, bold, italic, or bold-italic text
- Customizable background and frame
- Optional divider between the two lines
- Show or hide the entire display
- Fixed bottom-center position
## Example
> Plan the trade. Trade the plan.
**EURUSD • 1H**
## Purpose
Use this indicator to keep an important trading rule, personal motto, reminder, or discipline principle visible during every trading session.
## Important
This indicator does not generate trading signals, recommendations, or market predictions. It is intended exclusively for chart personalization and informational display. Indicator
RONBO USA Market open (09:30 EST)### RONBO USA Market Open (09:30 EST)
This lightweight, high-performance utility indicator plots a vertical line on your chart at exactly **09:30 AM Eastern Standard Time (EST / EDT)**, marking the official daily opening bell of the US stock markets.
Whether you trade Forex, Crypto, Indices, or US Equities, the US session open is one of the most volatile and liquid times of the trading day. Having a clear visual anchor of this moment helps you anticipate sudden volume surges, trend reversals, or breakout setups.
---
### Key Features:
* **Automatic DST Adjustment:** Built with advanced Pine Script timezone handling (`"America/New_York"`). You never have to manually adjust for Daylight Saving Time (DST) changes between Europe and the US. The line will always appear exactly at the US opening bell.
* **Multi-Timeframe Support:** Optimized to work flawlessly on lower intraday charts (1m, 5m, 15m) as well as the 1-hour (1h) timeframe.
* **Fully Customizable:** Easily change the line's color, style (Solid, Dashed, or Dotted), and thickness (up to 5px) directly from the indicator settings menu to match your personal chart theme.
* **Clean & Lightweight:** Optimized code that will not lag or clutter your TradingView workspace.
---
### How to use:
Simply add the indicator to your intraday chart. A vertical line will automatically mark the start of the New York session every single trading day. Indicator
FVG Support & ResistanceAuto FVG Target (1:2 RR)
This indicator automatically detects bullish and bearish Fair Value Gaps (FVGs) and helps traders visualize potential trade setups using a fixed Risk-to-Reward framework.
Features
Automatic detection of Bullish and Bearish Fair Value Gaps.
Clear FVG box visualization on the chart.
Entry signals based on price rejecting the Fair Value Gap and closing outside the zone.
Fixed Stop Loss calculated using the gap size (1× gap).
Automatic Take Profit based on a fixed 1:2 Risk-to-Reward ratio.
Buy and Sell labels for easy signal identification.
Configurable display settings for FVG visualization.
Designed to work across multiple markets and timeframes.
How It Works
A bullish Fair Value Gap is identified when the current candle's low is above the high of two candles earlier. A bearish Fair Value Gap is identified when the current candle's high is below the low of two candles earlier.
The indicator monitors these imbalance zones and waits for price to interact with them. When price rejects an FVG and closes outside the zone, a potential trade setup is generated. The stop loss is based on the size of the Fair Value Gap, while the take-profit target is automatically set to a fixed 1:2 Risk-to-Reward ratio.
Intended Use
This indicator is designed as a chart analysis tool to assist with identifying Fair Value Gap opportunities. It does not predict future price movement or guarantee profitable trades. Users should always combine its signals with their own analysis, risk management, and trading plan.
Notes
Works on all timeframes.
Suitable for Forex, Crypto, Indices, Commodities, and Stocks.
Best used alongside market structure, liquidity concepts, or other confirmation tools.
Historical results and plotted signals should not be considered a guarantee of future performance. Indicator
ICT Killzones & Key Levels -DST- By SpartanICT Killzones & Key Levels -DST- By Spartan
This tool brings together the reference levels that ICT-style session traders build their bias around, so you are not stacking four or five separate indicators on one chart to get them. Killzone session ranges, their pivot highs and lows, Fibonacci retracements of each session's range, and the higher-timeframe opens, highs, lows, and time markers that traders use to judge context all come from the same underlying session and time data. Keeping them in one script means they stay in sync with each other and with the timeframe/timezone settings you choose, instead of drifting apart the way separately-configured indicators can.
This indicator's strongest feature is the automatic daylight saving time adjustment for each session as it uses real time zones of each session and adjusts automatically rather than having to change them each time the clock is changed anywhere
WHAT IT DOES
Killzone sessions
Draws boxes around the Asia, London, and New York killzone sessions. Each session's time range is entered in that session's own local time (UTC for Asia, Europe/London for London, America/New York for New York) and automatically adjusts for daylight saving, so you never have to manually shift the input twice a year.
Pivots
Marks each session's high and low as extending lines, with optional labels showing price. Pivots can extend until price mitigates them or continue past mitigation, and can alert you when a session high or low is broken.
Fibonacci levels (new in this version)
Each session can independently plot 0, 0.25, 0.5, 0.75, and 1 retracement levels of its own range. These update live while the session is still forming and lock in place once the session closes, so you can watch how a session's midpoint and quartiles evolve in real time rather than only seeing them after the fact. Colors automatically match each session's own color so the chart stays readable.
Midpoints
Optional midpoint line for each session's pivot range, with the choice to stop tracking once price mitigates it or keep tracking through the session.
Killzone range table
An optional table showing each session's most recent range and its rolling average over a configurable number of past sessions, so you can gauge whether the current session is expanding or contracting relative to its recent history.
Day / Week / Month tools
Optional open lines, high/low lines, and separators for the daily, weekly, and monthly timeframes, each with independent alerting on high/low breaks.
Custom opening prices and timestamps
Up to eight custom time-of-day open markers (for marking things like true day open or other reference times you track) and four vertical timestamp lines, both independently configurable.
Day-of-week labels
Optional labels marking the start of each weekday on intraday charts, with the option to hide weekend labels.
HOW TO USE IT
Turn on the sessions you trade, set the killzone range and pivot options to match how you use highs/lows and mitigation, and enable Fibonacci levels on whichever sessions you want retracement context for. The killzone range table is useful for a quick read on whether the current session is unusually wide or narrow. The Day/Week/Month and custom time tools are there if you also reference higher-timeframe opens or specific times of day, but are fully optional and off by default so the chart stays clean if you only want killzones.
CREDIT AND ORIGINALITY
The killzone box, pivot, and DST-safe session-detection logic in this script is built on tradeforopp's open-source "ICT Killzones & Pivots" indicator. This version adds session-independent live-updating Fibonacci retracement levels (not present in the original), a reorganized and more clearly labeled settings panel, and several fixes to line/label handling in the underlying session logic. Published open-source in keeping with the license of the code it builds on.
This is a level-marking and context tool, not a signal generator or a strategy. It does not predict future price movement or guarantee any outcome; it plots historical and forming session data so you can build your own read of the market around it. Indicator
Indicator
Swing Move AreaHighlights sustained directional price swings — stretches where a stock has moved significantly in one direction over several days or weeks — while filtering out normal day-to-day noise.
How it works:
The indicator tracks price in one of two states: an up-swing or a down-swing. While in an up-swing, it continuously records the highest close reached. If price pulls back from that high by more than your Reversal Threshold (default 25%), the swing is considered over — a new down-swing begins, and the indicator starts tracking the low from there. The same logic applies in reverse for down-swings. Small retracements that don't exceed the threshold are ignored, so the swing keeps building through normal volatility instead of resetting on every wiggle.
The plotted area shows the cumulative % change from the start of the current swing to the current close — so a stock that ran from ₹100 to ₹432 over 54 days will show as one continuous green area reaching +332%, and a decline from ₹443 to ₹32 will show as one continuous red area reaching -93%.
Reading the chart:
Green area (above zero) — active up-swing; height = % gained from the swing's starting point
Red area (below zero) — active down-swing; height (depth) = % lost from the swing's starting point
Tall towers — large, sustained moves, exactly the kind of high-momentum stretches worth investigating
Flat/shallow ripples — normal chop that stayed within the reversal threshold
Inputs:
Reversal Threshold (%) — how much of a pullback from the peak/trough is needed to flip the swing direction. Lower = more sensitive, flips more often. Higher = smoother, only flags major trend changes.
Up/Down Swing Fill colors — customizable.
Note: This is a pane-only indicator (no chart overlay). It's a confirmed/lagging signal by design — a swing's full height is only known once it reverses, so use it for identifying and studying historical high-momentum moves rather than as a real-time entry trigger. Indicator
Indicator
Quantum Trend Pressure [QTP] [ JohnsonForexTrader]v1Introducing: Quantum Trend Pressure Pro v1
Advanced Trend Direction & Market Pressure System | Pine Script v6
A powerful and professionally designed TradingView indicator created to help traders understand market direction, momentum strength, and price movement with a clean and intelligent approach.
Quantum Trend Pressure Pro combines trend analysis, market pressure, and momentum confirmation into one complete trading tool. The purpose of this system is to help traders filter market noise, identify stronger movements, and make better-informed trading decisions.
🔹 Core Features:
🔹 Advanced Trend Detection Engine
Identifies the current market direction by analyzing trend strength and price behavior.
🔹 Market Pressure Measurement
Analyzes buying and selling pressure to reveal which side is controlling the market.
🔹 Momentum Confirmation System
Helps traders recognize when momentum is increasing and when a potential move has stronger confirmation.
🔹 Dynamic BUY & SELL Signals
Provides clean visual signals when multiple market conditions align together.
🔹 Professional Trend Dashboard
Displays important market information directly on the chart for quick decision-making.
🔹 Trend Strength Visualization
Helps traders understand whether the market is showing strong momentum or weak conditions.
🔹 Real-Time Alert Support
Allows traders to receive notifications when new opportunities appear.
How The System Works:
🔹 Step 1 — Market Trend Detection
The indicator first studies price movement and identifies whether the market is moving in a bullish, bearish, or uncertain direction.
🔹 Step 2 — Pressure Analysis
It evaluates buying and selling strength to understand the real force behind market movement.
🔹 Step 3 — Momentum Confirmation
The system checks momentum conditions to reduce unnecessary signals during weak market situations.
🔹 Step 4 — Signal Generation
When trend direction, market pressure, and momentum conditions come together, the indicator highlights potential trading opportunities.
🔹 Step 5 — Smart Market Monitoring
The dashboard provides a clear overview so traders can follow the market structure with better confidence and discipline.
Designed For:
🔹 Forex Traders
🔹 Gold (XAUUSD) Traders
🔹 Crypto Traders
🔹 Scalpers
🔹 Intraday Traders
🔹 Swing Traders
🔹 Technical Analysis Users
Built with Pine Script v6 using a clean, modern design focused on simplicity, accuracy, and professional chart analysis.
This tool is created for traders who want to understand market pressure, follow stronger trends, and improve their technical analysis workflow.
Read The Trend. Understand The Pressure. Trade With Discipline.
Quantum Trend Pressure Pro v1
A professional approach to modern market analysis.
#TradingView #PineScript #ForexTrading #GoldTrading #CryptoTrading #TechnicalAnalysis #TradingIndicators #PriceAction #MarketStructure #JohnsonForexTrading Indicator
Indicator
Indicator
ARBF Strategy v1.8ARBF Strategy v1.8 — Asia Range Breakout Framework
ARBF Strategy is a structured Asia Range breakout strategy built for Gold, BTC/Crypto, and other high-liquidity markets.
The core idea is simple:
The strategy defines the Asia range, waits for a confirmed breakout after the range is complete, then manages the trade with a risk-based exit engine.
It is designed to test whether price expansion after the Asia session creates a tradable edge.
Core logic
The strategy uses:
Asia Range high / low detection
Breakout bias after Asia session
Optional London Opening Range confirmation
Optional 4H / 1D EMA20 HTF alignment
Risk-based position sizing
Partial take-profit engine
Break-even and lock-profit stop options
Optional trailing runner
Weekday filter
Entry time filter
Gold and BTC/Crypto market profiles
Backtest start/end date controls
Trade modes
A: Break
Raw Asia range breakout.
A trade is triggered when price closes above or below the completed Asia range during the allowed signal window.
B: ABLC
Asia Bias London Continuation.
This requires:
Asia breakout bias
London Opening Range completed
Break of London OR in the bias direction
Optional 4H / 1D EMA20 alignment
Exit engine
The script includes two exit modes:
Single TP
Classic fixed R:R take profit with optional break-even at +1R.
Scaled TP
Default structure:
TP1 at 1R
TP2 at 1.5R
TP3 at 2R
Optional runner with trailing stop
Optional SL behavior after TP1 and TP2
Stop options include:
Keep initial SL
Move to break-even
Lock TP1
Lock TP2
This allows testing whether partial profits and runners improve long-term expectancy.
Market profiles
The strategy includes automatic market profile handling:
Gold
Uses dollar-based Asia range filters.
BTC / Crypto
Uses percentage-based Asia range filters.
This prevents the common problem where Gold settings block all BTC trades because the BTC Asia range is naturally much larger.
Filters
The strategy includes optional filters for:
Weekday selection
Entry time window
Start and end backtest dates
Asia range size gate
HTF trend alignment
One trade per day
These filters are included to help isolate bad market conditions and avoid overtrading.
Recommended chart settings
For best testing:
Timeframe: 5-minute chart
Gold feed: OANDA XAUUSD
Crypto: major liquid perpetual/spot feeds
Execution: On bar close
Commission and slippage enabled
Use realistic capital and leverage assumptions
Important notes
This is a strategy backtest tool, not a signal service.
Backtest results depend heavily on:
Symbol
Feed
Timeframe
Spread
Slippage
Commission
Broker execution
Bar magnifier settings
Selected date range
Market regime
Past performance does not guarantee future results.
Always forward-test before using any strategy live.
Disclaimer
This script is for educational and research purposes only.
It is not financial advice.
Trading involves risk, and users are responsible for their own decisions, risk management, and execution.
Release notes v1.8
Added improved scaled TP engine
Added SL behavior after TP1 and TP2
Added optional TP3 trailing runner
Added fixed weekday filter logic using selectable timezone
Added entry time filter
Added automatic Gold / BTC-Crypto market profile handling
Added backtest window controls
Added dashboard status for filters, gate, TP structure, and trailing state
Improved risk-based position sizing
Improved Asia session handling for Bangkok time
Added support for cleaner strategy testing across Gold and Crypto markets Strategy
Buy Sell Badge with DMI by ByblloBuy Sell Badge with DMI by Bybllo
At its core, this indicator combines two independent Buy/Sell signal sources into one badge system: (1) a basic Fast/Slow EMA crossover ("BSB"), and (2) a DMI-based signal built from the golden cross (DI+ crossing above DI-) and dead cross (DI- crossing above DI+) of the Directional Movement Index, filtered by a minimum ADX threshold.
The EMA crossover generates the base Buy/Sell signal, then automatically manages an ATR-based stop loss and a risk:reward-based take profit for each signal, showing the resulting entry/stop/target levels directly on the chart along with a live status table. The DMI golden-cross / dead-cross engine can be enabled as a confirmation filter on top of that: when turned on, a badge is only shown if a matching DMI cross (with ADX above a configurable threshold) occurs within a set number of bars of the EMA signal. In practice, this acts as a noise-reduction filter — choppy, low-conviction EMA crossovers with no matching directional strength behind them are suppressed, so only badges backed by both a trend-following signal and a directional-strength signal are actually displayed.
Key Features
Fast/Slow EMA crossover generates the base Buy/Sell signal, with an optional candle-confirmation requirement (close beyond open in the signal direction).
Automatic ATR-based stop loss and configurable Risk:Reward take profit are calculated for every new signal, with intermediate take-profit levels plotted when Risk:Reward is greater than 1.
Optional "BSB + DMI" confirmation filter: a badge is only shown when a DMI golden cross or dead cross, confirmed by ADX above your threshold, occurs within a configurable bar window of the EMA signal, in either order. This suppresses noisy, low-conviction EMA crossovers and leaves only the badges that are backed by both signals.
On-chart entry / stop-loss / take-profit lines and an SL distance (in points) label, both toggleable and only shown while a badge has actually been displayed for the active position.
Take-profit, stop-loss, and "invalidated" (opposite signal fired before target/stop was hit) markers are plotted separately so you can see exactly how each trade idea played out.
A live status table (top-right) shows the current position, entry, stop loss, take profit, and realized Risk:Reward.
Real-price calculation via request.security() keeps signals consistent regardless of chart type (Heikin Ashi, Renko, etc.).
A full set of alertcondition() calls for BSB-only signals, BSB+DMI confirmed signals, take-profit hits, stop-loss hits, and invalidated entries.
How to Use
Leave "BSB + DMI" unchecked to use the EMA crossover badges on their own (fastest signals, no directional-strength filter).
Check "BSB + DMI" to require that a DMI golden cross (for Buy) or dead cross (for Sell), confirmed by ADX, also occurs near the EMA signal — this filters out noise and typically reduces the number of badges, but favors signals that also have directional strength behind them.
Watch the on-chart entry/SL/TP lines and the status table to track an open idea's risk and progress in real time.
Set up alerts on the "BSB+DMI Buy/Sell", "Buy/Sell Signal", "Take Profit Hit", "Stop Loss Hit", or "Entry Invalidated" conditions depending on which events you want to be notified about.
Notes
The "EMA Badge Spacing" and "DMI Badge Spacing" inputs each apply their own cooldown to prevent duplicate signals firing on consecutive bars; keep the DMI spacing aligned with the badge spacing you use on other DMI-based indicators if you compare them side by side.
Stop-loss and alert-sensitivity offsets are point-based and will need adjusting per instrument (see the tooltips on those inputs).
This indicator does not place real orders; it is a visual / alerting tool for tracking a rules-based EMA + DMI golden-cross/dead-cross trade idea. Indicator
Strategy
Indicator
Indicator
