Get started

Forecasting

MACD Divergence Pro | Zero-Lag • No-Repaint中文介绍 MACD 背离 · 快速实时 / 不重绘 · 基于直方图（CN） 多数“MACD 背离”指标要么重绘严重（回测很漂亮、实盘不靠谱），要么触发很滞后（等几根 K 线后才给线/给提醒）。 这个脚本是我在十几版迭代中打磨出的方案(还是跟我的印度导师)：在保持收盘级别不重绘的同时，尽可能把信号“提前到条内”，并且把“提前”和“稳健”两种需求拆开、让你按场景选择。 这款脚本为什么更好？ 双模式，实盘&回测都可靠 确认模式（不重绘）：只在枢轴成立时（上一根确认为顶/底）画线并提醒，收盘后不会改变，适合回测与稳健交易。 预判预览（零延迟，可选）：条内一旦出现“价格创更高/更低而柱值更低/更高”的背离形态，就即时画“临时预判线”并提醒；如果形态被否定，会在本根内自动撤回。该模式给你“更早的入场观察”，但可能被取消。 基于 MACD 直方图：直接比较“柱值高/低”和“价格高/低”，不靠模糊的平滑线，背离定义清晰、可见性强。 多重背离/三背离：支持向前连接多段峰/谷，不是只找最近一段，把分层背离也抓出来。 分段规则可控 同侧最小间隔（柱）：避免“同一段内频繁连线”。 可选“跨色分段（红→绿→红 / 绿→红→绿）”：只在真正换势后才允许下一段，显著减少“同色内伪背离”。 即时提醒，严格对齐 预判提醒：只有当图表上真的画出了“临时预判线”时才触发，不会“响了但没线”。 确认提醒：当正式背离线落地的那一刻触发，用于“信号确认”。 视觉简洁：顶背离线=红色，底背离线=绿色；标签可开关，不挡柱不抢视线。 通用：适配任意周期、任意交易品种；参数默认即可用，也可按策略微调。 如何使用（建议） 做回测/稳健交易：仅开“确认提醒”，并把“即时模式（条内）”关闭，得到严格不重绘的标注与提醒。 做超短线/埋伏：打开即时模式 + 零延迟预览，启用预判提醒；当预判线出现就会立马提醒（未确认时可能被撤回）。 如想减少“跨段过远”的连线，可调大同侧最小间隔或打开跨色分段。 需要三背离/多背离，可把“最多向前连接几段”设为 3 或更高。 提示：预判是“更早但可能被否定”，确认是“稳健且不重绘”。两者结合，既看得早，也落得稳。 English Description MACD Divergence • Fast Live / No-Repaint • On Histogram Most “MACD divergence” indicators either repaint heavily (great in hindsight, unreliable in live trading) or lag badly (you get lines/alerts several bars late). This script has gone through 10+ iterations to strike the right balance: deliver earlier signals in real-time while keeping a truly no-repaint confirmation path. You decide when you need early preview or strict confirmation. What makes it different? Two operating modes—choose per scenario Confirmation mode (No-Repaint): Lines/alerts are printed only when the pivot is confirmed (previous bar), and they never change after close. Perfect for backtesting and conservative trading. Zero-Lag Preview (optional): As soon as an in-bar divergence forms on the histogram (price makes a higher high/lower low while the bar value fails), a temporary preview line is drawn immediately and an alert is fired; if invalidated before the bar closes, it’s removed. Earlier visibility with the right caveat. Histogram-based logic: We compare bar heights against price highs/lows—clear definition and strong visual readability. Multi-link divergences (incl. triple): Not limited to the nearest swing—you can extend lines across multiple prior pivots to capture stacked divergences. Controllable segmentation Minimum bars between same-side pivots to avoid noisy over-linking. Optional cross-color segmentation (red→green→red / green→red→green) to reduce false divergences within a same-color run. Alerts that match what you see Preview alert fires only when a preview line is actually drawn—no more alerts without lines. Confirmation alert fires when the final line is committed. Clean visuals: Bearish lines = red, Bullish lines = green; labels are optional to keep the histogram unobstructed. Works everywhere: Any symbol, any timeframe. Defaults are sensible; parameters can be tuned to your workflow. Suggested workflow Backtest / conservative execution: Use Confirmation alerts only, turn Live (in-bar) evaluation off to ensure strict no-repaint behavior. Scalping / early entries: Turn Live mode + Zero-Lag Preview on and enable Preview alerts—you’ll be notified the moment a preview line appears (it may retract before close). Increase Min same-side spacing or enable Cross-color segmentation to limit stretched links. Raise Max links to capture double/triple divergences. TL;DR: Preview = earlier but retractable. Confirmation = slower but rock-solid. Combine both to see early and act with confidence.
Pine Script® indicator
by LeverKing-Crypto-Jaywei
Omega Correlation [OmegaTools]Omega Correlation (Ω CRR) is a cross-asset analytics tool designed to quantify both the strength of the relationship between two instruments and the tendency of one to move ahead of the other. It is intended for traders who work with indices, futures, FX, commodities, equities and ETFs, and who require something more robust than a simple linear correlation line. The indicator operates in two distinct modes, selected via the “Show” parameter: Correlation and Anticipation. In Correlation mode, the script focuses on how tightly the current chart and the chosen second asset move together. In Anticipation mode, it shifts to a lead–lag perspective and estimates whether the second asset tends to behave as a leader or a follower relative to the symbol on the chart. In both modes, the core inputs are the chart symbol and a user-selected second symbol. Internally, both assets are transformed into normalized log-returns: the script computes logarithmic returns, removes short-term mean and scales by realized volatility, then clips extreme values. This normalisation allows the tool to compare behaviour across assets with different price levels and volatility profiles. In Correlation mode, the indicator computes a composite correlation score that typically ranges between –1 and +1. Values near +1 indicate strong and persistent positive co-movement, values near zero indicate an unstable or weak link, and values near –1 indicate a stable anti-correlation regime. The composite score is constructed from three components. The first component is a normalized return co-movement measure. After transforming both instruments into normalized returns, the script evaluates how similar those returns are bar by bar. When the two assets consistently deliver returns of similar sign and magnitude, this component is high and positive. When they frequently diverge or move in opposite directions, it becomes negative. This captures short-term co-movement in a volatility-adjusted way. The second component focuses on high–low swing alignment. Rather than looking only at closes, it examines the direction of changes in highs and lows for each bar. If both instruments are printing higher highs and higher lows together, or lower highs and lower lows together, the swing structure is considered aligned. Persistent alignment contributes positively to the correlation score, while repeated mismatches between the swing directions reduce it. This helps differentiate between superficial price noise and structural similarity in trend behaviour. The third component is a classical Pearson correlation on closing prices, computed over a longer lookback. This serves as a stabilising backbone that summarises general co-movement over a broader window. By combining normalized return co-movement, swing alignment and standard price correlation with calibrated weights, the Correlation mode provides a richer view than a single linear measure, capturing both short-term dynamic interaction and longer-term structural linkage. In Anticipation mode, Omega Correlation estimates whether the second asset tends to lead or lag the current chart. The output is again a continuous score around the range. Positive values suggest that the second asset is acting more as a leader, with its past moves bearing informative value for subsequent moves of the chart symbol. Negative values indicate that the second asset behaves more like a laggard or follower. Values near zero suggest that no stable lead–lag structure can be identified. The anticipation score is built from four elements inspired by quantitative lead–lag and price discovery analysis. The first element is a residual lead correlation, conceptually similar to Granger-style logic. The script first measures how much of the chart symbol’s normalized returns can be explained by its own lagged values. It then removes that component and studies the correlation between the residuals and lagged returns of the second asset. If the second asset’s past returns consistently explain what the chart symbol does beyond its own autoregressive behaviour, this residual correlation becomes significantly positive. The second element is an asymmetric lead–lag structure measure. It compares the strength of relationships in both directions across multiple lags: the correlation of the current symbol with lagged versions of the second asset (candidate leader) versus the correlation of lagged values of the current symbol with the present values of the second asset. If the forward direction (second asset leading the first) is systematically stronger than the backward direction, the structure is skewed toward genuine leadership of the second asset. The third element is a relative price discovery score, constructed by building a dynamic hedge ratio between the two prices and defining a spread. The indicator looks at how changes in each asset contribute to correcting deviations in this spread over time. When the chart symbol tends to do most of the adjustment while the second asset remains relatively stable, it suggests that the second asset is taking a greater role in determining the equilibrium price and the chart symbol is adjusting to it. The difference in adjustment intensity between the two instruments is summarised into a single score. The fourth element is a breakout follow-through causality component. The script scans for breakout events on the second asset, where its price breaks out of a recent high or low range while the chart symbol has not yet done so. It then evaluates whether the chart symbol subsequently confirms the breakout direction, remains neutral, or moves against it. Events where the second asset breaks and the first asset later follows in the same direction add positive contribution, while failed or contrarian follow-through reduce this component. The contribution is also lightly modulated by the strength of the breakout, via the underlying normalized return. The four elements of the Anticipation mode are combined into a single leading correlation score, providing a compact and interpretable measure of whether the second asset currently behaves as an effective early signal for the symbol you trade. To aid interpretation, Omega Correlation builds dynamic bands around the active series (correlation or anticipation). It estimates a long-term central tendency and a typical deviation around it, plotting upper and lower bands that highlight unusually high or low values relative to recent history. These bands can be used to distinguish routine fluctuations from genuinely extreme regimes. The script also computes percentile-based levels for the correlation series and uses them to track two special price levels on the main chart: lost correlation levels and gained correlation levels. When the correlation drops below an upper percentile threshold, the current price is stored as a lost correlation level and plotted as a horizontal line. When the correlation rises above a lower percentile threshold, the current price is stored as a gained correlation level. These levels mark zones where a historically strong relationship between the two markets broke down or re-emerged, and can be used to frame divergence, convergence and spread opportunities. An information panel summarises, in real time, whether the second asset is behaving more as a leading, lagging or independent instrument according to the anticipation score, and suggests whether the current environment is more conducive to de-alignment, re-alignment or classic spread behaviour based on the correlation regime. This makes the tool directly interpretable even for users who are not familiar with all the underlying statistical details. Typical applications for Omega Correlation include intermarket analysis (for example, index vs index, commodity vs related equity sector, FX vs bonds), dynamic hedge sizing, regime detection for algorithmic strategies, and the identification of lead–lag structures where a macro driver or benchmark can be monitored as an early signal for the instrument actually traded. The indicator can be applied across intraday and higher timeframes, with the understanding that the strength and nature of relationships will differ across horizons. Omega Correlation is designed as an advanced analytical framework, not as a standalone trading system. Correlation and lead–lag relationships are statistical in nature and can change abruptly, especially around macro events, regime shifts or liquidity shocks. A positive anticipation reading does not guarantee that the second asset will always move first, and a high correlation regime can break without warning. All outputs of this tool should be combined with independent analysis, sound risk management and, when appropriate, backtesting or forward testing on the user’s specific instruments and timeframes. The intention behind Omega Correlation is to bring techniques inspired by quantitative research, such as normalized return analysis, residual correlation, asymmetric lead–lag structure, price discovery logic and breakout event studies, into an accessible TradingView indicator. It is intended for traders who want a structured, professional way to understand how markets interact and to incorporate that information into their discretionary or systematic decision-making processes.
Pine Script® indicator
by OmegaTools
MarketMind PRO v1.0 🜁 MarketMind PRO v1.0 — Multi-Session Real-Time Context Engine Find opportunity faster. Trade with clarity and conviction. 🜁 MarketMind PRO is a real-time, session-aware context intelligence engine designed to answer one essential question: Is this ticker truly in play today? Its analysis adapts instantly to the current trading phase—Early Flow (Pre-Market), Volatility Burst (Open), Low-Vol Window (Midday), Rebuild Phase (Afternoon), or Power Hour (Pre-Close)—so the score and bias signals you see always reflect the conditions that matter right now. This makes 🜁 MarketMind PRO a multi-timeframe environment engine with a strong emphasis on deep real-time analysis during the two highest-edge windows of the day: Pre-Market and Pre-Close . By fusing macro alignment, sector flow, liquidity quality, volatility regime, microstructure behavior, and options-driven pressure into a single visual framework, 🜁 MarketMind PRO turns noisy charts into clean, decision-ready environments. Whether you're hunting high-quality overnight setups in the final hour, scanning gap-driven opportunities before the open, or evaluating structure during the regular session, 🜁 MarketMind PRO highlights the context that matters—and filters out everything that doesn’t. ⭐ WHAT 🜁 MARKETMIND PRO ACTUALLY DOES 🜁 MarketMind PRO performs continuous real-time analysis across all trading phases. It: • detects when a ticker is aligned with broader market forces • highlights high-quality conditions for intraday or overnight trades • warns you when macro, VWAP, or gap conditions make the setup unsafe • reveals trend, structure, liquidity, and flow context instantly • consolidates cross-market awareness into one simple, unobtrusive chart It’s built for traders who want clarity without complexity. ⭐ THE CORE OF 🜁 MARKETMIND PRO: THE SQS SCORE (0–100) SQS (System Quality Score) compresses nine critical dimensions of market and setup readiness: ✓ Gap Behavior ✓ Sector Flow ✓ Liquidity Quality ✓ Relative Strength ✓ Macro Alignment ✓ Microstructure Strength ✓ Price Stability ✓ Options Flow ✓ Bonus Context (trend confluence, regime reinforcement) SQS is fully session-aware and adjusts its weighting model in real time. It automatically adapts to the two highest-opportunity phases: • Pre-Close (15:30–16:00 ET) — for overnight hunters • Pre-Market (04:00–09:30 ET) — for gap traders & open-drive setups Scores translate into an intuitive tier: • GO – High-quality environment • WATCH – Developing conditions • PASS – Low-quality environment • SKIP – Hard block triggered (Macro, VWAP, Gap) SQS doesn’t tell you what to trade — it tells you when the environment is worth your attention. ⭐ OPTIONS FLOW ENGINE v1.0 — A NEW DIMENSION OF CONVICTION 🜁 MarketMind PRO v1.0 introduces a dedicated Options Flow Engine, designed for traders who rely on flow-aligned environments. Powered by a multi-layer fusion model, Options Flow measures: • directional bias (Call vs Put) • macro confirmation state • RS, volatility, and trend bursts • volume-imbalance pressure (buy/sell dominance) • expansion bars & spike behavior • early reversal/compression signals • pre-market flow acceleration • contextual flow multiplier (momentum × volatility × VWAP × sector alignment) The output is a smooth, conservative, non-inflated flow signal that highlights genuine options pressure—not noise. When enabled, Options Flow integrates directly into SQS as a weighted component, adding a powerful second layer of confirmation without overwhelming the trader. ⭐ THE HUD — EVERYTHING THAT MATTERS, INSTANTLY The on-chart HUD is designed for ultra-fast interpretation and adapts automatically to your current session in real-time: ✔ Macro Bias (overall market tone & volatility environment) ✔ Sector Bias (how strong your ticker’s sector is today) ✔ Trend Bias (the chart’s structure, trend quality, VWAP position) ✔ Micro Bias (how similar tickers are behaving — peer confirmation) ✔ SQS Score (0–100) with tiers for GO / WATCH / PASS / SKIP ✔ Hard Block Reason (Macro, VWAP, or Gap — conditions that stop a setup from qualifying) ✔ Breakdown Panel (full 9-factor score display) ✔ Key Driver Analysis (which factor moved SQS the most) ✔ Options Mode Output (direction, expiry, delta, flow%) Every element is tuned to reduce cognitive load and turn complex market states into clean, actionable context. ⭐ PRE-CLOSE MODE — IDENTIFY HIGH-QUALITY OVERNIGHT SETUPS During 15:30–16:00 ET, 🜁 MarketMind PRO shifts into its highest-precision overnight model, emphasizing: • structural integrity • trend continuation • sector agreement • macro confirmation • liquidity quality • stability conditions This helps uncover tickers building strength into the close—ideal for selective overnight positions. ⭐ PRE-MARKET MODE — FIND THE BEST GAP PLAYS BEFORE THE BELL In the pre-market window, weightings shift toward: • gap magnitude × character • early liquidity quality • volatility expansion vs compression • microstructure acceleration • macro alignment ahead of the open • premarket flow strength (if Options Mode enabled) You immediately see which tickers are warming up, which are accelerating, and which are fading before the open. ⭐ OPTIONS MODE (OPTIONAL FEATURE) When activated, 🜁 MarketMind PRO displays: • Call/Put direction • Expiry (0DTE / 1DTE / 2DTE) • Delta • Options Flow % • Flow Direction Bias (Bullish / Bearish) This mode is ideal for: • flow-confirmation traders • macro-aligned momentum plays • premarket sweep/chase setups • intraday continuation plays Options Mode is fully optional. SQS remains complete and accurate without it. ⭐ WHY TRADERS USE 🜁 MARKETMIND PRO ✓ Avoid low-quality environments No more wasting time in chop, illiquid tickers, or dead setups. ✓ Spot opportunity faster A single glance tells you whether a ticker is heating up or not worth your time. ✓ Build confidence and clarity You understand why the environment is favorable—or why it isn’t. ✓ Streamline your scanning routine 🜁 MarketMind PRO was engineered for fast, repeatable workflows. ✓ Stay aligned with broader market structure Bias and regime context are always visible. ⭐ WHO 🜁 MARKETMIND PRO IS FOR • Day traders • Swing traders • Options traders • Pre-Market scanners • Pre-Close overnight hunters • Momentum, trend, and structure traders • Systematic/algo traders who need human-readable context If you value context first, decisions second, this tool was built for you. ⭐ RECOMMENDED SETTINGS & WORKFLOW • Use Pre-Close Mode 15:30–16:00 ET for overnight setups • Use Pre-Market Mode 07:00–09:30 ET for gap filtering & open-drive candidates • Enable Options Mode only if your strategy benefits from flow context • Keep HUD in Top Right for the cleanest chart layout • Turn OFF Inputs/Values in Status Line for optimal display ⭐ IMPORTANT NOTES • 🜁 MarketMind PRO is a context engine, not a buy/sell signal • It pairs best with your existing strategy or system • No proprietary signals or predictions are provided • SQS is session-aware and adapts automatically • Options Flow is intentionally conservative—greens are rare and meaningful ⭐ FINAL THOUGHTS 🜁 MarketMind PRO v1.0 is built for the modern trader who wants clarity, speed, and conviction. It provides the macro, micro, structure, and flow context needed to choose smarter setups—without guessing or over-analyzing. If you want a clean, disciplined way to identify when a ticker truly deserves your attention… 🜁 MarketMind PRO is the missing piece of your workflow.
Pine Script® indicator
by nedra-codes
BHUVANA Fib 50–61.8 • Turn Alerts when FIB directions change Detects step-up / step-down on both Fib 50 & 61.8 (your “stairs” logic). Triggers BUY/SELL on that slope change (optionally also requires price to be above/below the line).Spot volatility compression around the 50%–61.8% Fibonacci mid-band of the current swing, then trade the first expansion with clean, rules-based entries and auto SL references. Swing mapping: Finds the active high/low over a user-defined lookback and computes Fib 50% and Fib 61.8%. Squeeze detection: Measures the distance between 50% and 61.8%. If the band width is ≤ (ATR × multiplier), the zone is flagged as a Squeeze. Breakout entries (on close): Long when price crosses up through 50% while squeezed. Short when price crosses down through 61.8% while squeezed. Risk framework: Auto-plots stop lines from the signal bar: Long SL = swing low; Short SL = swing high. Visuals: Fib lines (50/61.8) + optional yellow zone highlight during squeeze. Signals evaluate on bar close (no forward-looking data). Works well on XAUUSD / US30 intraday (5–15m) during London/NY sessions. Add your own alertcondition() lines if you want push alerts on Long/Short entries.
Pine Script® indicator
by mankarnan
PRO Triple+ Confirmation Overlay SignalsThis script uses the 200 SMA + RSI + MACD confirmations as buy and sell signals. It only give a signal if all three line up. works well for general market direction signals. It also has a higher time frame filter that will filter out 70%-90% of traps and counter trend signals. MACD momentum trigger times entries with momentum shifts. RSI confirmation as well as volume confirmation to remove entries in low volume dead markets.
Pine Script® indicator
by ryanpaget13
HighCrew Sniper Entry/Exit This system uses a multi-timeframe momentum-forecast model that detects pressure shifts before standard confirmation signals trigger. It calculates real-time Force, Speed, Power, and Acceleration values derived from live RSI and price-velocity behavior, then adapts dynamically between lower (scalp) and higher (swing) intervals. When acceleration and power converge, the system identifies early directional intent and prints a bias signal for traders to confirm entry or manage exits. The framework continuously self-adjusts its thresholds based on volatility and relative strength to maintain precision during fast market changes. Use cases: intraday scalping, micro-trend reversal timing, swing-bias validation. Disclaimer: Algorithmic forecasts only; practice proper risk management.
Pine Script® indicator
by HighCrewLLC
[algsc][16STOCH][MLB+MBS][LineBreak+Renko][Price+CVD] ALPHA CONFLUENCE ENGINE — 16×2 Noiseless Multi-Chart Score System (Private) Proprietary fusion of 16 advanced noiseless chart structures (32 total layers) simultaneously analyzing both pure price momentum and institutional Cumulative Volume Delta flow. The indicator continuously tracks 16 independent scoring systems across two completely different non-time-based chart engines, delivering a single ultra-clean confluence reading: • Real-time 4-way score display directly on chart • Large institutional-grade B / S arrows only when extreme alignment occurs across multiple hidden layers • Zero repainting · Zero lag · Works on every market and timeframe This is the same internal confluence tool used in our private trading group — now available as a closed-source, high-precision signal engine. Strictly limited access. For serious traders only. products.algscience@gmail.com
Pine Script® indicator
by algscience
3
[iQ]PRO Volume Frequency Profile+++🌌 PRO Volume Frequency Profile+++: The Fusion of Precision and Market Flow The PRO Volume Frequency Profile+++ ( PRO VFP+++) is a next-generation analytical instrument designed for the discerning professional trader. It masterfully synthesizes multiple advanced concepts—Dynamic Linear Regression, High-Fidelity Frequency Analysis, and a Volumetric Distribution Profile—into a single, unified view of market structure. This powerful fusion provides unparalleled context for identifying high-probability turning points and key areas of interest. 🔬 Core Innovation: The Symbiotic Market Model At its heart, the PRO VFP+++ is built on a proprietary methodology that transcends traditional price action by analyzing the frequency and distribution of traded volume relative to the dominant price trend. Adaptive Regression Channel: The indicator establishes a highly dynamic Linear Regression channel, which acts as the core gravity well of the current trend. This channel is then protected by multi-tier Standard Deviation (SD) Bands with highly optimized, non-standard multipliers, defining the boundaries of expected price movement. High-Resolution Frequency Bands: An integrated, proprietary Frequency Analysis component detects the underlying rhythmic oscillation in the market. This mechanism generates Frequency Bands that fluctuate around the core regression line, providing an exceptionally sensitive, leading, and dynamic channel for short-term mean-reversion and continuation signals. Volumetric Profile Insight: A sophisticated Volume Frequency Profile is meticulously constructed over the look back period defined by the Linear Regression. This profile maps the distribution of trading activity, with an advanced implementation that provides a directional bias (Buy/Sell color gradient) within the volume nodes themselves, offering a deeper understanding of market participation. ✨ The Edge: Strategic Node Detection The indicator's most compelling feature is its Intelligent Node Detection System. This system is specifically engineered to filter out market noise and highlight critical confluence zones: Confluence Nodes: Automatically identifies and marks prices where the statistically significant Volume Nodes from the profile interact with the calculated Linear Regression lines and Standard Deviation Bands. These intersection points are areas where technical structure and realized market flow align, signaling price magnets or potential reversal zones. Customizable Sensitivity: The system is governed by a Node Sensitivity parameter, allowing the user to fine-tune the filter for market conditions, ensuring only the most robust interactions are flagged. 🚨 Real-Time Opportunity & Security To ensure maximum efficiency, the PRO VFP+++ features comprehensive, real-time Alerts based on all three core components: Significant Node Cross: Alerts when price intersects a high-confluence interaction node. Regression Line Touch: Alerts when price tests the core regression line, indicating a re-test of the dominant trend. SD Band Touch: Alerts upon contact with the statistical boundaries, signaling potential overextension or trend strength. This is a professional-grade, proprietary instrument. The source code is intentionally closed and protected to preserve the unique advantage of its underlying algorithms, which are the result of extensive research and optimization. Access is restricted and may be limited to invited, paying members only. Unlock the next level of market structure analysis with the PRO VFP+++.
Pine Script® indicator
by MarketMakerlQ
SoopAlgo — Premium Buy & Sell Targets (v6)SoopAlgo — Premium Targets (v6) Description / Usage: SoopAlgo — Premium Targets is a powerful trading tool designed to provide clear and actionable buy and sell signals directly on your chart. It highlights optimal entry points with distinct labels and automatically plots target levels, helping traders plan exits with precision. Advantages: Clear Visual Signals: Buy and sell opportunities are displayed prominently, reducing confusion and improving decision-making speed. Integrated Target Levels: Automatic target lines allow traders to set realistic profit expectations without manual calculations. Customizable Alerts: Receive alerts when signals occur, ensuring you never miss a trade opportunity. Clean, Modern Display: Minimal clutter with intuitive color-coding (Buy in blue, Sell in purple) for easy chart readability. Flexible Settings: Easily adjust target distances, label sizes, and indicator sensitivity to fit different trading styles. Ideal For: Traders who want a streamlined, easy-to-read tool for spotting market entries and exits with visual targets and alerts, while keeping the chart clean and focused.
Pine Script® indicator
by akbarintec
4
able zone# able zone ## 📋 Overview **able zone** is an advanced Support & Resistance zone detection indicator optimized for **15-minute timeframe trading**. It combines Price Action, Volume Profile, and intelligent zone analysis to identify high-probability trading areas with precise entry and exit points. ## 🎯 Core Features ### 1. **Zone Detection Methods** - **Auto Detect**: Automatically finds the best zones using combined analysis - **Price Action**: Based on pivot points and price structure - **Volume Profile**: Identifies High Volume Nodes (HVN) where most trading occurred - **Combined**: Uses all methods together for comprehensive analysis ### 2. **Zone Types & Colors** - 🟢 **Support Zones** (Green): Price tends to bounce up from these areas - 🔴 **Resistance Zones** (Red): Price tends to reverse down from these areas - 🟣 **HVN Zones** (Purple): High volume areas from Volume Profile - **Strong Zones**: Darker colors indicate zones with more touches (higher reliability) ### 3. **Zone Strength Indicators** - **Labels**: "S3" = Support with 3 touches, "R5" = Resistance with 5 touches - **Touch Count**: More touches = stronger zone - **Min Touch Count Setting**: Adjust to filter weak zones (default: 3) ## ⚙️ Settings Guide ### **Zone Detection Settings** - **Detection Method**: Choose your preferred analysis method - **Lookback Period** (50-500): How many bars to analyze (default: 200) - For 15min: 200 bars = ~50 hours of data - Shorter = Recent zones only - Longer = Historical zones included - **Min Touch Count** (2-10): Minimum touches to qualify as a zone (default: 3) - **Zone Thickness %** (0.1-2.0): How thick the zones appear (default: 0.5) - Based on ATR for dynamic sizing on 15min chart ### **Zone Colors** Fully customizable colors for: - Support Zone (default: Green) - Resistance Zone (default: Red) - Strong Support/Resistance (darker shades) - Volume Profile Zone (default: Purple) ### **Zone Touch Detection** - **Enable Touch Alerts**: Get notifications when price enters zones - **Touch Distance %** (0.1-1.0): How close to zone counts as "touch" (default: 0.3%) - On 15min chart, this gives early warning signals - **Show Touch Markers**: Visual indicators when price touches zones - 🔺 = Support touch (potential buy) - 🔻 = Resistance touch (potential sell) - 💎 = HVN touch (watch for breakout/rejection) ### **Volume Profile Integration** - **Show VP Zones**: Display high volume node zones - **VP Resolution** (20-50): Number of price levels analyzed (default: 30) - **POC Line** (orange): Point of Control - highest volume price level - **POC Width**: Line thickness (1-3) - **Show HVN**: Display High Volume Node zones - **HVN Threshold** (0.5-0.9): Volume % to qualify as HVN (default: 0.7) ### **Display Options** - **Zone Labels**: Show S/R labels with touch count - **Zone Border Lines**: Dotted lines at zone boundaries - **Extend Zones Right**: Project zones into future - **Max Visible Zones** (5-50): Maximum number of zones displayed (default: 20) - Adjust based on chart clarity needs - **Info Table**: Real-time information dashboard ## 📊 Info Table Explained The info table (top-right corner) provides real-time zone analysis: ### **Row 1: ZONE Header** - Shows current timeframe (15m) - Total active zones - "able" branding ### **Row 2: 🎯 TOUCH Status** - **RES**: Currently touching resistance (⚠️ potential reversal down) - **SUP**: Currently touching support (🚀 potential bounce up) - **HVN**: Currently in high volume area (⚡ watch for direction) - **FREE**: Not near any zone (⏳ wait for setup) - Progress bar shows proximity strength - Arrows indicate zone type ### **Row 3: 🟢 SUP - Support Zones** - Number of active support zones below current price - Progress bar shows relative quantity - More support = stronger floor ### **Row 4: 🔴 RES - Resistance Zones** - Number of active resistance zones above current price - Progress bar shows relative quantity - More resistance = stronger ceiling ### **Row 5: 🟣 HVN - High Volume Nodes** - Number of HVN zones (from Volume Profile) - These are areas where most trading activity occurred - Often act as magnets for price ### **Row 6: 📍 NEAR - Nearest Zone** - Shows closest zone type (SUP/RES/HVN) - Distance in % to nearest zone - Arrow shows if zone is above or below ### **Row 7: POSITION - Price Position** - **HIGH**: Price near range top (70%+) - watch for resistance - **MID**: Price in middle range (30-70%) - neutral zone - **LOW**: Price near range bottom (<30%) - watch for support - Shows exact position % in lookback range ### **Row 8: ═ SIGNAL ═** - **🚀 BUY**: Touching support zone (entry opportunity) - **⚠️ SELL**: Touching resistance zone (exit/short opportunity) - **⚡ WATCH**: At HVN (prepare for breakout or rejection) - **⏳ WAIT**: No clear setup (be patient) ## 🎓 Trading Strategy for 15-Minute Timeframe ### **Basic Setup** 1. Set timeframe to **15 minutes** 2. Use **Auto Detect** or **Combined** method 3. Set **Lookback Period**: 200 bars (~50 hours) 4. Set **Min Touch Count**: 3 (proven zones) ### **Entry Signals** #### **Long Entry (Buy)** - Price touches green support zone - Table shows "🚀 BUY" signal - Look for bullish candle pattern (hammer, engulfing) - Volume increases on bounce - **Best Entry**: Bottom of support zone - **Stop Loss**: Below support zone (1-2 ATR) - **Target**: Next resistance zone or 2:1 RR #### **Short Entry (Sell)** - Price touches red resistance zone - Table shows "⚠️ SELL" signal - Look for bearish candle pattern (shooting star, engulfing) - Volume increases on rejection - **Best Entry**: Top of resistance zone - **Stop Loss**: Above resistance zone (1-2 ATR) - **Target**: Next support zone or 2:1 RR #### **HVN Breakout Strategy** - Price approaches purple HVN zone - Table shows "⚡ WATCH" - Wait for breakout with strong volume - **If breaks up**: Go long, target next resistance - **If breaks down**: Go short, target next support ### **Zone Strength Rules** - **S5+ or R5+**: Very strong zones (high probability) - **S3-S4 or R3-R4**: Reliable zones (good setups) - **S2 or R2**: Weak zones (use caution) ### **Best Trading Times (15min)** - **London Open**: 08:00-12:00 GMT (high volume) - **NY Open**: 13:00-17:00 GMT (high volatility) - **Overlap**: 13:00-16:00 GMT (best setups) - **Avoid**: Asian session low volatility periods ### **Risk Management** - Never risk more than 1-2% per trade - Use stop loss ALWAYS (place outside zones) - Take partial profits at 1:1, let rest run to 2:1 or 3:1 - If price consolidates in zone > 3 candles, exit ## ⚠️ Important Notes ### **When Zones Work Best** ✅ Clear trending markets ✅ After significant price movements ✅ At session opens (London/NY) ✅ When multiple zones align ✅ Strong zone with 5+ touches ### **When to Be Cautious** ❌ During major news releases (use economic calendar) ❌ Very low volume periods ❌ Price consolidating inside zone ❌ Weak zones with only 2 touches ❌ Conflicting signals from multiple indicators ### **15-Minute Specific Tips** - **Lookback 200**: Captures 2-3 trading days of zones - **Touch Distance 0.3%**: Early signals on 15min moves - **Max Zones 20**: Keeps chart clean but comprehensive - **Watch POC**: Often acts as pivot on 15min - **Volume spike + zone touch** = high probability setup ## 🔧 Recommended Settings for 15min ### **Conservative Trader** - Detection Method: Combined - Min Touch Count: 4 - Max Zones: 15 - Touch Distance: 0.2% ### **Aggressive Trader** - Detection Method: Auto Detect - Min Touch Count: 2 - Max Zones: 25 - Touch Distance: 0.5% ### **Volume Profile Focused** - Detection Method: Volume Profile - Show HVN: Yes - HVN Threshold: 0.6 - Show POC: Yes ## 📈 Example Trade Scenario (15min) **Setup**: BTC/USD on 15-minute chart 1. Price approaching green support zone at $42,000 2. Zone label shows "S4" (touched 4 times) 3. Table shows "🚀 BUY" signal 4. Volume increasing on approach 5. Bullish hammer candle forms **Entry**: $42,050 (bottom of zone) **Stop Loss**: $41,900 (below zone) **Target 1**: $42,350 (2:1 RR) **Target 2**: Next resistance at $42,650 **Result**: Price bounces, hits Target 1 in 3 candles (~45min) ## 💡 Pro Tips 1. **Combine with trend**: Trade in direction of higher timeframe trend 2. **Multiple touches**: Zones with 5+ touches are highest probability 3. **Volume confirmation**: Always check volume on zone touch 4. **POC magnet**: Price often returns to POC line 5. **False breakouts**: If price barely breaks zone and returns = strong signal 6. **Zone-to-zone**: Trade from support to resistance, resistance to support 7. **Time of day**: Best setups occur during peak volume hours 8. **Chart timeframe**: Use 1H to confirm trend, 15min for entry 9. **News avoidance**: Close trades before high-impact news 10. **Zone clusters**: Multiple zones together = strong area --- **Created by able** | Optimized for 15-minute trading **Version**: 1.0 | Compatible with TradingView Pine Script v5 For support and updates, enable alerts and monitor the info table in real-time!
Pine Script® indicator
by Able-terminal
2
Global Liquidity - Impulse (ROC & Z-score) [GMI-style]What it is: Liquidity is a faucet. When central banks add money, the faucet opens (risk-on). When they pull money out, it closes (risk-off). This indicator builds a global net-liquidity proxy and shows its impulse : - ROC (green/red histogram): % change vs N weeks ago. - Z-score (cyan line): how unusually strong the latest weekly move is. Why it matters: Liquidity impulse often leads risk assets (equities/crypto) by weeks to a few months. - Green bars > 0 + positive Z → friendlier risk-on backdrop. - Red bars < 0 + negative Z → tightening conditions; caution. Data used (TV Economics / FRED): USA (FRED, millions USD): - FRED:WALCL (Fed assets) - FRED:RRPONTSYD (Reverse Repo – subtract) - FRED:WTREGEN (Treasury General Account – subtract) Other CBs (Economics, units vary): - ECONOMICS:EUCBBS (ECB) - ECONOMICS:JPCBBS (BoJ) - ECONOMICS:CNCBBS (PBoC) Optional: - ECONOMICS:GBCBBS (BoE, UK) - ECONOMICS:CACBBS (BoC, Canada) - ECONOMICS:CHCBBS (SNB, Switzerland) - ECONOMICS:AUCBBS (RBA, Australia) Proxy (scaled to billions): (Fed − RRP − TGA) + ECB + BoJ + PBoC + How to read: - Green bars above 0 = faucet opening → money in → risk-on. - Red bars below 0 = faucet closing → money out → risk-off. - Taller bar = stronger push. - Cyan Z > +1 = unusually strong positive impulse; Z < −1 = unusually strong negative impulse. - Background : green when ROC>0 & Z>0 , red when ROC<0 & Z<0 . Quick reading guide (TL;DR): - Early risk-on: ROC crosses > 0 and Z > 0 (ideally Z ≥ +1 ). - Early risk-off: ROC crosses < 0 and Z < 0 (ideally Z ≤ −1 ). - Use weekly timeframe; price often reacts with a 0–12 week lag. - Combine with PMIs/New Orders, real yields (down), and credit spreads (narrowing). Notes: Symbols may differ by provider; leave optional banks OFF if missing. Currencies/units differ across CBs; this is a pragmatic proxy, not a perfect macro model. Educational use only; not financial advice.
Pine Script® indicator
by romansx
1
Aizen 50 SMA Trend DashboardAizen 50 SMA Trend Dashboard V2 1. What this indicator is Name: Aizen 50 SMA Trend Dashboard V2 This indicator helps you quickly understand three important things: 1. Whether price is above or below the 50 Simple Moving Average (50 SMA). 2. The trend direction across multiple timeframes using the MTF dashboard. 3. Clear Buy/Sell arrows whenever price crosses the 50 SMA. It is a trend-following tool designed to make trend reading, timing, and bias much easier. It does not replace your strategy but enhances your decision-making. ________________________________________ 2. What you see on the chart The indicator includes four main visual components: 1. 50 SMA line 2. Colored candles 3. MTF Trend Dashboard (top right) 4. Buy/Sell arrows ________________________________________ 2.1. 50 SMA Line • A 50-period SMA is plotted directly on your chart. • Green SMA: price is above the 50 SMA. • Red SMA: price is below the 50 SMA. • You can toggle it on/off using: Show 50 SMA on Chart The SMA acts as your primary trend reference. ________________________________________ 2.2. Candle Colors Candles dynamically change color based on where they close relative to the SMA: • Bullish color: close > 50 SMA • Bearish color: close < 50 SMA • Neutral color: price is sitting on the SMA This makes trend clarity simple: • Bullish runs → candles stacked above the SMA • Bearish runs → candles stacked below the SMA • Choppy zones → candles flip colors back and forth ________________________________________ 2.3. MTF Trend Dashboard (Top Right) The dashboard analyzes the trend vs 50 SMA on: • 15m • 30m • 1h • 4h • 1D Each timeframe displays: • Green (Bullish): price above its timeframe's 50 SMA • Red (Bearish): price below its timeframe's 50 SMA • Gray (Neutral): price near its SMA Toggle it on/off using: Show MTF Trend Dashboard (Top Right) How to use it: • More green → prioritize Buy setups • More red → prioritize Sell setups • Mixed → market conditions unclear; trade cautiously ________________________________________ 2.4. Buy/Sell Arrows Arrows appear when price crosses the 50 SMA on your current timeframe: • Buy Arrow: price crosses from below to above the SMA • Sell Arrow: price crosses from above to below the SMA Settings allow you to control visibility: • Show Buy/Sell Signals – master switch • Show Buy Signals Only • Show Sell Signals Only You can also activate alerts when signals appear. ________________________________________ 3. How to use this indicator (Step-by-Step) This workflow keeps trading simple and structured. ________________________________________ Step 1 – Choose Your Trading Timeframe Examples: • Intraday: 5m, 15m, 30m • Swing: 1h, 4h, 1D The dashboard always provides context with: 15m, 30m, 1h, 4h, 1D. ________________________________________ Step 2 – Set Your Bias Using the Dashboard Before entering any trade: • 1h & 4h Bullish (green) → focus on Buy setups • 1h & 4h Bearish (red) → focus on Sell setups • Mixed → reduced clarity; be patient Simple rule: • Buy when higher timeframes (especially 1h & 4h) are Bullish • Sell when higher timeframes are Bearish ________________________________________ Step 3 – Check Price vs 50 SMA on Your Entry Timeframe On your main chart: • Above green SMA + bullish candles: uptrend → look for Buys • Below red SMA + bearish candles: downtrend → look for Sells • Crossing back and forth: ranging → expect fake signals ________________________________________ Step 4 – Use Arrows as Entry Timing (Not as a Standalone Signal) Once bias is set: For Buys 1. Dashboard: higher timeframes mostly Bullish 2. Price pulls back toward/under the 50 SMA 3. Price closes back above the SMA → Buy arrow 4. Entry ideas: o Stop below recent swing low or below SMA o Target minimum 1:1 reward For Sells 1. Dashboard: higher timeframes mostly Bearish 2. Price pulls up toward/above the 50 SMA 3. Price closes back below SMA → Sell arrow 4. Entry ideas: o Stop above recent swing high or above SMA o Target minimum 1:1 reward Important: Arrows confirm timing; structure and risk/reward matter more. ________________________________________ Step 5 – Use Buy-Only or Sell-Only Modes This helps keep your bias clean: Uptrend • Show Buy Signals Only = ON • Show Sell Signals Only = OFF Downtrend • Show Buy Signals Only = OFF • Show Sell Signals Only = ON This reduces noise and avoids unnecessary counter-trend trades. ________________________________________ 4. Best Type of Setup for This Indicator The highest-quality setups come from: Trend + Pullback + SMA Crossover Example Buy: • Dashboard: 1h & 4h Bullish • Entry TF (e.g., 15m): o Price above a green SMA o Pullback into SMA area o Candle closes back above → Buy arrow • Confirmation: o Support or higher low o Logical stop & target Example Sell: • Dashboard: 1h & 4h Bearish • Entry TF: o Price below a red SMA o Pullback to SMA area o Candle closes back below → Sell arrow These signals have the highest probability. ________________________________________ 5. Fake Signals and Realistic Expectations You must understand this clearly: There WILL be fake Buy/Sell arrows. Why: • Crossovers happen often in sideways markets • When price ranges around the SMA, arrows will fire repeatedly • The indicator cannot block chop or news-driven volatility Your job is to filter the setup. ________________________________________ How to Reduce Bad Trades Before taking a signal, check: 1. Dashboard alignment • Strong Buy: 1h & 4h clearly Bullish • Strong Sell: 1h & 4h clearly Bearish 2. Trend vs Range • Trend = candles stacked on one side of SMA • Range = candles switching colors → dangerous 3. Structure • Buy near support • Sell near resistance 4. Risk/Reward • Skip if stop is too large or target too small The indicator shows opportunities, but you decide which ones are worth taking.
Pine Script® indicator
by gardigans
Liquidity LayoutLiquidity Layout The Liquidity Layout is a comprehensive macroeconomic indicator that tracks global liquidity conditions by aggregating multiple financial data streams from major economies (US, EU, China, Japan, UK, Canada, Switzerland). It provides traders with a macro view of market liquidity to help identify favorable conditions for risk assets ⚠️ Important: Timeframe Settings This indicator is designed for the 1W (weekly) timeframe. If you use other timeframes, you must adjust the offset parameter in the settings to properly align the data with price action. The default offset of 12 is calibrated for weekly charts. What It Measures This indicator combines seven key components of global liquidity: 1. Global M2 Money Supply - Tracks broad money supply (M2) plus 10% of narrow money supply (M1) across major economies, weighted by currency strength. This represents the total amount of money circulating in the private sector. 2. Central Bank Balance Sheets (CBBS) - Monitors the combined balance sheets of major central banks (Fed, ECB, BoJ, PBoC, etc.), reflecting quantitative easing and monetary expansion policies. 3. Foreign Exchange Reserves (FER) - Aggregates forex reserves held by central banks, indicating international liquidity buffers and capital flows. 4. Current Account + Capital Flows (CA) - Combines current account balances with capital flows to measure cross-border money movement and trade liquidity. 5. Government Spending (GSP) - Tracks government expenditure minus a portion of federal expenses, representing fiscal stimulus and public sector liquidity injection. 6. World Currency Unit (WCU) - A custom forex composite that weights major and emerging market currencies to capture global currency strength dynamics. 7. Bond Market Conditions - Analyzes yield curves, spreads, and bond indices to assess credit conditions and risk appetite in fixed income markets. The Formula The indicator uses two main calculation modes: ADJ Global Liquidity (Default): × This multiplies liquidity components by currency and bond market factors to capture the interactive effects between monetary conditions and market sentiment. TPI (Trend Power Index) Mode: A normalized version that combines all components with optimized weights: Global Liquidity Index: 10% Bonds: 17.5% Bond Yields: 25% Currency Strength: 25% Government Spending: 5% Current Account: 5% M2: 2.5% Central Bank Balance Sheets: 2.5% Forex Reserves: 5% Oil (macro risk indicator): 2.5% How to Use It Visualization Modes: Background Mode (default): Orange background appears when TPI is positive (favorable liquidity conditions) Line Mode: Displays the indicator as an orange line with customizable offset Interpreting the Signal: Positive/Rising = Expanding liquidity, generally bullish for risk assets Negative/Falling = Contracting liquidity, risk-off environment TPI > 1 = Extremely favorable conditions (upper threshold) TPI < -1 = Severe liquidity stress (lower threshold) Best Practices: Use on higher timeframes (daily, weekly) for macro trend analysis Combine with price action - liquidity often leads market moves by weeks or months Watch for divergences between liquidity and asset prices Particularly relevant for Bitcoin, equities, and risk assets Data Sources The indicator pulls real-time economic data from TradingView's ECONOMICS database and major market indices, including central bank statistics, government reports, and forex rates across G7 and major emerging markets. Settings Data Plot: Choose which liquidity component to display Plot Type: Switch between raw Index values or normalized TPI Offset: Shift the plot forward/backward for alignment (default: 12 for weekly charts) Style: Background shading or line plot Notes This is a macro-level indicator best suited for understanding the broader liquidity environment rather than short-term trading signals. It helps answer the question: "Is the global financial system expanding or contracting liquidity?"
Pine Script® indicator
by Unicorpus
Predictive Analysis Engine — Adaptive MACD Forecasting with R² SProfessional and Rule-Compliant Description (Ready for Publishing) This description explains every component of the script in detail, highlights its originality, and provides traders with clear usage instructions — exactly what TradingView expects. Predictive Analysis Engine (PAE) This script is a predictive analysis model that combines trend filtering, linear forecasting, stability analysis (R²), and outlier filtering using ATR to produce an advanced, leading-style version of MACD rather than a traditional lagging one. The indicator does not rely on random elements; it is built on four core components that work together: 1. Stability Measurement Using R² The coefficient of determination (R²) is calculated based on the correlation between price and time, then normalized to a 0–1 scale. A higher R² indicates more stable price movement, allowing the script to increase forecast accuracy. Here, R² acts as a primary component of the Confidence Filter. 2. Forecasted Price Using Linear Regression Instead of relying solely on the current price, the script uses: Linear Regression Weighted blending between the forecasted price and actual price This enables the script to build a Leading MACD based on an “advanced” price that anticipates probable movement. 3. Advanced MACD With Adaptive Smoothing MACD is applied to the blended (real + forecasted) price using: Fast EMA Slow EMA MACD base Optional TEMA for reducing signal lag Adjustable histogram smoothing This process makes MACD more responsive with significantly less lag, reacting faster to predicted movements. 4. Predictive MACD (Projected MACD) Linear Regression is applied again — but this time to: MACD Signal Histogram to generate projected versions of each line (proj_macd, proj_signal), while proj_hist is used to produce early signals before the actual crossover occurs. 5. Volatility Filtering Using ATR & Volatility Ratio ATR is used to evaluate: Strength of movement Overextension levels Signal quality ATR is combined with R² to compute: Confidence = R² × Volatility Ratio This suppresses weak signals and boosts high-quality, reliable ones. 6. Predictive Signals + Safety Filters A signal is triggered when: proj_hist crosses the 0 level Confidence exceeds the required threshold The real histogram is not excessively stretched (extra safety) The script includes: BUY / SELL BUY_STRONG / SELL_STRONG based on the smoothed histogram trend. 7. Coloring, Background & Visual Enhancements The script colors: The histogram Chart background Signal lines to clearly highlight momentum direction and confidence conditions. 8. Built-In Alerts The script provides ready-to-use alerts: BUY Alert SELL Alert Both based on the predictive MACD model. How to Use the Script Add it to any timeframe and any market. BUY/SELL signals are generated from the projected histogram crossover. Higher Confidence = stronger signal. Background colors help visualize trend transitions instantly. Recommended to combine with support/resistance or price action. Indicator Objective This script is designed to deliver early insight into momentum shifts using a blend of: Linear forecasting Trend stability via R² Signal quality filtering via ATR A fast and adaptive advanced MACD
Pine Script® indicator
by oqba
Nuh's Stochastic + Structure 1.0Nuh's Stochastic + Structure 1.0 is an advanced momentum–structure fusion indicator designed to identify high-probability reversal and continuation zones using a multi-layer confirmation engine. The script combines enhanced Stochastic analysis, market structure detection (HH/HL/LH/LL), divergence tracking, volume spikes, higher-timeframe trend alignment, and extreme-duration filters to deliver highly reliable buy/sell signals. Each signal is dynamically scored for strength, and a compact one-line trend panel provides real-time market state at a glance. Colors and visual elements follow a clear and intuitive hierarchy optimized for fast decision-making. Ideal for crypto, indices, and forex traders who want precision entries with minimal noise.
Pine Script® indicator
by nuhkoc1960
Macro Return ForecastWhen the macro environment was similar, what annualized return did the market usually deliver next? Before using the indicator, make sure your chart is set to any US-market symbol (SPX, QQQ, DIA, etc.). This requirement is simple: the indicator pulls macro series from US data (yields, TIPS, credit spreads, breadth of US indices). Because these series are independent from the chart’s price series, the chart symbol itself does not affect the internal calculations. Any US symbol works, and the output of the model will be identical as long as you are on a US asset with daily, weekly or monthly timeframe. The plotted price does not matter: the macro engine is fully exogenous to the chart symbol. 1. What the indicator does relative to selected assets In the settings you choose which market you want to analyze: - S&P500 - Nasdaq or NQ100 - Dow Jones - Russell 2000 - US-wide (VTI) - S&P500 sectors (XLF, XLY, XLP, etc.) For each one, the indicator loads: - Its internal breadth series (percentage of constituents above MA200) - Its price history to compute forward log-returns at multiple horizons - Its regime position relative to its own MA200 (for bull/bear filtering) This means the tool is not tied to the chart symbol you display. If your chart is SPX but the indicator setting is “S&P500 Technology”, the expected return projection is computed for the Technology sector using its own data, not the chart’s data. You can therefore: - Visualize macro-driven expected returns for any major US index or sector. - Compare how different parts of the market historically reacted to similar macro states. - Switch assets instantly to see which segment historically behaved better in comparable macro conditions. The indicator becomes an analyzer of macro sensitivity, not a chart-dependent indicator. 2. Method overview The model answers a statistical question: “When macro conditions looked like they do today, what forward annualized return did this asset usually deliver?” To do this it combines four macro pillars: - Market breadth of the selected asset - Yield curve slope (US 10Y minus 2Y) - US credit spread (high yield minus gov) - US real rate (TIPS 10Y) It normalizes each metric into a 0–100 score, groups similar historical states into bins, and examines what the asset did next across six horizons (from ~9 months to ~5 years). This produces a historical map connecting macro states to realized forward returns. It is not a forecast model. It is a conditional-distribution estimator: it tells you what has historically happened from similar setups. 3. Why this produces useful insights on assets For any chosen asset (SPX, Nasdaq, sectors…), the indicator computes: - Its forward return distribution in similar macro states. - How often these states occurred (n). - Whether the macro environment that preceded positive returns in the past resembles today’s. - Whether the asset tends to be more sensitive or more resilient than the broad index under given macro configurations. - Whether a given sector historically benefited from specific yield-curve, credit or real-rate environments. This lets you answer questions such as: - Does this sector usually outperform in an inverted yield curve environment? - Does the Nasdaq historically recover strongly after breadth collapses? - How did the S&P500 behave historically when real rates were this high? - Is today’s credit-spread environment typically associated with positive or negative forward returns for this index? These insights are not predictions but statistical context backed by past market behavior. 4. Why the technique is robust (and why it matters) The engine uses strict, non-optimistic data processing: - Winsorization of returns to neutralize extreme outliers without deleting information. - Shrinkage estimators to avoid overfitting when bins contain few occurrences. - Adaptive or static bounds for scaling macro indicators, ensuring comparability across cycles. - Inverse-variance weighting of horizons with penalties for horizon redundancy. - HAC-style adjustments to reduce autocorrelation bias in return estimation. Each method aims to prevent artificial inflation of expected-return values and to keep the estimator stable even in unusual macro states. This produces a result that is not “optimistic”, not curve-fit, not dependent on chart tricks, and not sensitive to isolated historical anomalies. 5. What you get as a user A single clean line: Expected Annual Return (%) This line reflects how the chosen asset historically performed after macro environments similar to today’s. The color gradient and confidence indicator (n) show the density of comparable episodes in history. This makes the output extremely simple to read: - High, stable expectation: historically supportive macro environment. - Low or negative expectation: historically weaker environments. - Low confidence: the macro state is rare and historical comparisons are limited. The tool therefore adds context, not signals. It helps you understand the environment the asset is currently in, based on how markets behaved in similar conditions across US market history.
Pine Script® indicator
by Julien_Eche
Indices ALN SessionsIndices ALN Sessions - Pattern Analysis with Historical Probabilities Overview This indicator analyzes overnight trading patterns across Asia, London, and New York sessions for major index futures (NQ, ES, YM), providing real-time probability analysis based on 15 years of historical data (2010-2025). Pattern Detection Methodology The indicator detects four distinct overnight patterns by comparing session high/low relationships: 1. London Engulfs Asia Condition: London High > Asia High AND London Low < Asia Low Interpretation: London session completely engulfed the Asia range 2. Asia Engulfs London Condition: Asia High > London High AND Asia Low < London Low Interpretation: London session remained within Asia's range 3. London Partial Up Condition: London High > Asia High AND London Low ≥ Asia Low Interpretation: London broke Asia high but not its low 4. London Partial Down Condition: London Low < Asia Low AND London High ≤ Asia High Interpretation: London broke Asia low but not the high Probability Calculation Probabilities are derived from historical analysis of 1-minute price data spanning 2010-2025 across all three indices. The system tracks: Primary Targets: Most likely level to be taken during NY session based on pattern Secondary Targets: Second most likely level Asia Targets: Probability of reaching untouched Asia levels (for partial patterns) Engulfment Probability: Likelihood of NY session taking all four levels Day-of-Week Specificity Each pattern has unique probability profiles for Monday through Friday, as market behavior varies significantly by day. The indicator automatically selects the appropriate probability set based on the current trading day. Conditional Probability Logic The indicator dynamically adjusts probabilities as levels are taken during the NY session: When the Primary target is taken first → Shows conditional probability for Secondary target When Secondary is taken before Primary → Adjusts Primary probability based on historical sequences Real-time tracking shows which levels have been hit with checkmark confirmations How Probabilities Were Derived Data was collected from 15 years of 1-minute futures data for NQ, ES, and YM. For each trading day: Asia session high/low recorded (8:00 PM - 2:00 AM EST) London session high/low recorded (2:00 AM - 8:00 AM EST) Pattern type classified NY session behavior tracked (8:00 AM - 4:00 PM EST) Level breaks recorded with sequence order Statistical frequencies calculated by pattern, day, and instrument Sample sizes vary but typically include 200-500+ occurrences per pattern/day combination over the 15-year period. Visual Components Session Boxes: Color-coded rectangles showing Asia (Yellow), London (Blue), and NY (Red) sessions with their high/low ranges. Pivot Lines: Horizontal lines marking session highs and lows that extend until broken or until the drawing cutoff time. Pattern Labels: Automatic labeling at NY open identifying which of the four patterns has formed. Probability Table: Real-time table showing: Current pattern type Instrument type (NQ/ES/YM) and day of week Sample size (when using dynamic stats) Primary, Secondary, and Asia target probabilities Engulfment probability Live confirmations as levels are taken Color Coding: Green background: 70%+ probability Lime: 50-70% probability Orange: 30-50% probability Red: Confirmed (level taken) Settings & Inputs Historical Stats Instrument Type: Select NQ, ES, or YM (each has unique probability data) Use Dynamic Stats: Toggle between historical probabilities and live collection mode Sessions: Customizable session times (default: Asia 8PM-2AM, London 2AM-8AM, NY 8AM-4PM EST) Session box transparency and colors Toggle session boxes and text on/off Pivots: Show/hide pivot lines and labels Extend pivots until mitigated or past mitigation Alert when pivots are broken Midpoint display option Probabilities: Show/hide probability table Table position and size customization Pattern label display toggle Opening Prices: Optional horizontal lines at key times (midnight,18:00, 09:30, etc.) How to Use: Apply to 5-minute chart of NQ, ES, or YM futures Select your instrument in settings to match the chart Wait for NY session open - Pattern will be identified and probabilities displayed Monitor the probability table - Primary targets show highest probability levels Watch for confirmations - Checkmarks appear as levels are taken Note conditional updates - Probabilities adjust based on which level breaks first Trading Applications: Directional bias: High probability targets suggest likely NY session movement Level awareness: Know which session highs/lows are most likely to be tested Risk management: Lower probability scenarios may warrant tighter stops Sequence planning: Conditional probabilities help anticipate multi-level moves What Makes This Different: Unlike standard session indicators that only display ranges, this tool: Classifies specific overnight pattern formations: Provides quantified probabilities based on extensive historical analysis Updates in real-time with conditional logic as the session develops Distinguishes between different indices (NQ/ES/YM) and days of week Tracks level-break sequences, not just final outcomes Notes: Probabilities are based on historical frequencies and do not guarantee future results Best used on 1, 5, and 15-minute timeframes for optimal session visualization Works on continuous futures contracts or /NQ, /ES, /YM symbols
Pine Script® indicator
by mrjimenez
2
Guardian Pulse + Enhanced All-In-One (FINAL WORKING)Guardian Pulse + Enhanced All-In-OGUARDIAN PULSE – The indicator that prints bright lime candles + huge green arrows when it’s time to BUY. Real rules (no repainting, no bullshit): - RSI bounces off 35 - Price above the 21 EMA - Green candle + volume spike → Lime candle + giant green “BUY” arrow appears → Red arrow = take profits / exit What you get instantly after payment: ✅ Full Pine Script v6 code (copy-paste into TradingView) ✅ Lifetime updates (I’ll send new versions free) ✅ Works on stocks, crypto, futures, forex – any ticker, any timeframe ✅ Built-in phone alerts Buy now → code delivered automatically in <60 seconds.ne (FINAL WORKING)
Pine Script® indicator
by dustinappenzeller1987
MAHI Indicator v9.5 - Smart Momentum HUD + IntradayMAHI Indicator v9.5 — Smart Momentum HUD (Multi-Framework + Intraday Engine) A Complete Momentum, Trend, and Setup Framework for Swing, Position & Intraday Traders MAHI v9.5 is the most advanced version yet — a highly optimized, visual, multi-framework trading system that blends momentum, trend alignment, adaptive setup detection, and now Auto-Intraday Mode for short-term traders. This indicator acts like a Heads-Up Display (HUD) on your chart: it shows trend strength, squeeze zones, dynamic support/resistance, EMAs, setup validation, and early reversal signals in one clean interface — without clutter. ✔ Core Features 📌 1. Smart Momentum Ribbon A dynamic EMA-based momentum band that visually shifts as trend strength changes. Helps identify strong vs. weak momentum zones Adapts to volatility & trend slope Works on all timeframes (1m to 1M) 📌 2. EMA 9 → 21 Flip System A precision trend-switching signal: EMA 9 → 21 BULL = early bullish momentum EMA 9 → 21 BEAR = early bearish momentum More reliable than stand-alone MA crossovers 📌 3. Bullish Setup Engine (Standard + Weak) Automatically identifies when price is entering a reversal-ready state based on: Position relative to the ribbon Candle structure Momentum compression Slope + exhaustion conditions Includes: Bull Setup (Standard) — Higher probability setup Bull Setup (Weak) — Early or less developed setup Setup Invalidated — Confirms that the pattern failed This prevents false confidence & keeps traders disciplined. 📌 4. Strong Buy / Strong Sell Signals Only appear when multiple confirmations align: Ribbon bias EMA slope Momentum compression Trend alignment Filtered to remove noise — especially in lower timeframes. 📌 5. Multi-Timeframe Trend HUD Top-right panel summarizing: Overall Trend (Bullish, Bearish, Neutral) RSI Condition Daily vs Weekly Alignment Trading Mode Suggestions (Buy / Sell / LEAPS / Neutral) This gives instant context. 📌 6. Auto Intraday Engine (NEW in v9.5) Automatically switches internal logic when you move into intraday timeframes (1m–30m): Intraday Enhancements: Adaptive setup detection Faster momentum sensitivity EMAs tuned for scalp/swing precision Tighter invalidation logic Reduced false positives Optional strict filtering Perfect for scalping, day trading & micro-trends Works instantly — no settings needed. Just change the chart timeframe and MAHI adjusts. 📌 7. Dynamic High-Timeframe Support (W & M) Auto-layers weekly & monthly levels: Helps identify strong bounce zones Extremely useful for swing & LEAPS traders 📌 8. Weekly Volume Shelf Projection Lightweight VWAP-style level based on weekly volume aggregation. Shows probable bottoming areas during pullbacks. ✔ Who This Indicator Is For Perfect for: Day traders Swing traders Momentum riders LEAPS & long-term investors Beginner traders needing a structured system MAHI adapts to your timeframe and trading style. ✔ Why MAHI Works MAHI isn’t a single-signal indicator — it’s a framework. It combines: Trend Momentum Volatility Setup pattern detection Validation & invalidation Multi-timeframe alignment Dynamic zones Intraday optimization This eliminates guesswork and helps traders avoid the emotional traps that cause most losses. You don’t just get a signal — you get context. ✔ How to Use It Follow the ribbon bias Use EMA 9→21 flips as trend confirmation Look for Bull Setup tags during pullbacks Avoid trades when you see Setup Invalidated Respect weekly/monthly HTF support levels On intraday charts — rely on auto-optimized mode For swing entries, combine setups with HTF trend HUD MAHI gives the map. You choose the path. ✔ Final Notes This version is heavily optimized for performance, clarity, and high-probability signals. MAHI does not repaint, and works on all assets including: Stocks Crypto ETFs Forex Futures
Pine Script® indicator
by mahipalc