Get started

Multitimeframe

ADX + DI Trend Gate PROADX + DI Trend Gate PRO is a trend filter and signal tool built around DMI (DI+ / DI-) and ADX. It helps you avoid choppy conditions by requiring real trend strength and DI separation before allowing signals. Key features: AUTO presets for 5m / 15m (optimized for fast intraday use) Optional MTF confirmation (5m → 15m, 15m → 1H) Adaptive DI Gap (volatility-based adjustment using ATR/Close) Confirm on bar close option (no repaint mode) Signal modes: DI Cross (classic) or Gate Flip (more responsive) Optional filters: ATR volatility filter and Volume filter Exit signals when trend weakens (ADX weakening / DI convergence / DI flip) Info panel with active parameters, AUTO vs MANUAL, MTF diff, and adjustable panel font size How to use (practical): For cleaner signals, keep AUTO presets ON and enable Confirm on bar close. For stricter filtering, enable MTF confirmation and/or Require ADX rising. Volume filter is best on instruments with meaningful volume; on Forex (tick volume) it’s often better OFF. Disclaimer : This indicator is a trend filter and timing tool, not financial advice. Always backtest and use proper risk management.
Pine Script® indicator
by stoyan_valev
Trinity Multi-Timeframe CCITrinity Multi-Timeframe CCI Indicator This Pine Script indicator is a powerful **multi-timeframe Commodity Channel Index (MTF CCI)** tool that displays three CCI lines on a single pane: - **Current timeframe** (whatever chart you're viewing, e.g., 1h, 15m, etc.) - **4-hour timeframe** - **Daily timeframe** All three use the same CCI length (default 20, adjustable) and are fully customizable—you can enable/disable each line, change its timeframe, color, and thickness. Horizontal levels at 0 (dashed white by default), +100 (red), and -100 (green) are also included and fully editable. ### Core Functionality & Visual Signals The standout feature is the **dynamic coloring of the current timeframe CCI line**: - **Green**: Strong **bullish alignment**. This occurs when **all three CCIs are above the zero line** AND the current timeframe CCI is the **highest** of the three (leading the move upward with higher-timeframe confirmation). - **Red**: Strong **bearish alignment**. This occurs when **all three CCIs are below the zero line** AND the current timeframe CCI is the **lowest** of the three (leading the move downward with higher-timeframe confirmation). - **Yellow**: Neutral or no clear alignment (default state when the above conditions aren't met). An optional light background shading (green or red) highlights when the indicator is in a bullish or bearish state. Small triangle markers appear on the pane when a new bullish or bearish alignment forms, and built-in alerts notify you of new signals or when a signal ends. These are editable to enable or disable. ### How Traders Can Use It This indicator helps identify **high-probability trend continuations or reversals** by combining momentum (CCI) across multiple timeframes with alignment confirmation: - **Trend-following entries**: A green current line (especially with a fresh alert) suggests strong upward momentum backed by higher timeframes—ideal for long entries or adding to positions in an uptrend. - **Bearish entries/short setups**: A red current line signals strong downward momentum confirmed across timeframes—good for short entries or exiting longs. - **Confluence filter**: Use it as a filter for other strategies. Only take trades in the direction of the alignment (e.g., only long if current line is green). - **Early warning of weakness**: When the current line turns yellow after being green/red, it often signals the trend is losing multi-timeframe support—useful for tightening stops or taking partial profits. In essence, it visually answers the question: “Is the short-term momentum not only strong, but also aligned with and leading the medium- and long-term momentum?” When the answer is yes (green or red), it highlights moments of **multi-timeframe confluence**—some of the most reliable setups in technical trading. The alerts make it practical for active traders: you get notified the moment a strong aligned signal appears, without needing to watch the chart constantly. It's clean, highly customizable, and focuses on one clear concept—**multi-timeframe CCI leadership**—making it excellent for trend, swing, and even intraday traders looking for higher-timeframe confirmation.
Pine Script® indicator
by EMA34TRADER
Neural Trend Engine [JOAT]Neural Trend Engine - Multi-Layer Adaptive Trend Detection Neural Trend Engine uses a multi-layer filtering approach inspired by neural network concepts. It combines multiple adaptive moving averages with proprietary momentum and volatility weighting to generate trend signals with reduced lag and improved confidence scoring. Why This Script is Protected This script is published as closed-source to protect the proprietary signal composition algorithm and the specific weighting methodology from unauthorized republishing. The unique combination of adaptive layer calculations, momentum normalization, and volatility integration represents original work that goes beyond standard indicator implementations. What Makes This Indicator Unique Unlike simple moving average crossover systems, Neural Trend Engine: Uses three Kaufman Adaptive Moving Averages (KAMA) that automatically adjust their smoothing based on market efficiency Combines layer alignment, momentum, and volatility into a single "neural signal" Provides signal strength percentages so you know the conviction level of each signal Creates a visual trend cloud that makes direction immediately obvious What This Indicator Does Plots three adaptive moving average "layers" that respond dynamically to market efficiency Creates a trend cloud between fast and slow layers for visual trend identification Generates weighted composite signals from layer alignment, momentum, and volatility Displays buy/sell labels with signal strength percentages Provides a comprehensive dashboard with multi-component breakdown Colors the neural line and cloud based on current trend direction Core Methodology The indicator employs a three-layer adaptive system where each layer responds to market conditions at different speeds: Fast Layer (default: 8) — Quick response for short-term direction changes Medium Layer (default: 21) — Intermediate trend reference Slow Layer (default: 55) — Long-term trend anchor Each layer uses efficiency-based adaptation, meaning they become more responsive during trending conditions and smoother during choppy markets. The neural signal is a proprietary composite that weighs three distinct market components: Momentum Component (default: 40%) — Measures directional price velocity, normalized to its recent range Trend Component (default: 35%) — Evaluates alignment between the three adaptive layers Volatility Component (default: 25%) — Incorporates market volatility state into signal generation These components are combined using a weighted formula that has been calibrated to balance responsiveness with noise reduction. Signal Generation Direction changes occur when the smoothed neural signal crosses a configurable strength threshold: Bullish — Signal exceeds positive threshold with layer alignment confirmation Bearish — Signal drops below negative threshold with layer alignment confirmation Neutral — Signal remains within threshold range, indicating consolidation Signal strength percentages indicate the conviction level of each signal, helping traders assess trade quality. Higher percentages suggest stronger trend conviction. Visual Features Trend Cloud — Filled area between fast and slow layers, colored by trend direction Neural Line with Glow — Weighted average of all three layers with glow effect Medium Layer — Subtle white line showing intermediate trend Signal Labels — BUY/SELL labels with strength percentages at signal points Small Markers — Alternative triangle markers when labels are disabled Color Scheme Bullish Color — Default: #26A69A (teal green) — Used for bullish trends and signals Bearish Color — Default: #EF5350 (red) — Used for bearish trends and signals Cloud Fill — 85% transparent version of trend color Neural Line Glow — 60% transparent version for glow effect Dashboard Information The on-chart table (top-right corner) displays: Current direction (BULLISH, BEARISH, or NEUTRAL) Neural signal percentage Layer alignment status (ALIGNED UP, ALIGNED DOWN, or MIXED) Momentum direction and percentage Trend strength percentage Inputs Overview Neural Layers: Fast Layer — Period for fast adaptive MA (default: 8, range: 2-50) Medium Layer — Period for medium adaptive MA (default: 21, range: 5-100) Slow Layer — Period for slow adaptive MA (default: 55, range: 10-200) Source — Price source for calculations (default: close) Sensitivity: Momentum Weight — Weight for momentum component (default: 0.4) Trend Weight — Weight for trend/layer alignment (default: 0.35) Volatility Weight — Weight for volatility component (default: 0.25) ATR Period — Period for volatility calculations (default: 14) Visual Settings: Bullish/Bearish Colors — Customizable color scheme Show Trend Cloud — Toggle the filled cloud area Show Signal Labels — Toggle BUY/SELL labels with percentages Show Neural Line — Toggle the main trend line Show Dashboard — Toggle the information table Alerts: Await Bar Confirmation — Wait for bar close before triggering (recommended) Min Signal Strength — Threshold for direction changes (default: 0.3 = 30%) How to Use It For Trend Following: Follow the trend cloud color for overall market direction Enter long when cloud turns bullish (teal) and signal strength is high Enter short when cloud turns bearish (red) and signal strength is high Use the neural line as a trailing stop reference For Signal Trading: Wait for BUY/SELL labels to appear Check the signal strength percentage—higher is better Confirm with dashboard showing aligned layers Avoid signals during MIXED layer alignment For Confirmation: Use Neural Trend Engine to confirm signals from other systems Strong confirmation when all three layers are aligned Dashboard shows momentum and trend strength for additional context Alerts Available NTE Buy Signal — Bullish direction change detected NTE Sell Signal — Bearish direction change detected NTE Direction Change — Any trend direction change Best Practices Higher signal strength percentages indicate more reliable signals Wait for layer alignment (shown in dashboard) before entering trades Use on higher timeframes for more reliable trend identification Combine with support/resistance levels for entry timing This indicator is provided for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management before making trading decisions. — Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
SigmaPulse NavigatorThe **zSigma Pulse Navigator** is a comprehensive, "Regime-Based" algorithmic trading tool designed for TradingView. Unlike standard technical indicators that generate continuous buy or sell signals regardless of market conditions, the zSigma Pulse functions primarily as a **market filter**. It first mathematically classifies the market environment as either "Efficient" (Trending) or "Inefficient" (Choppy) and only unlocks specific trading signals that are statistically valid for that specific state. It is constructed from three distinct computational "engines" that work in unison to eliminate false signals: ### 1. The Regime Engine (The Filter) The foundation of the zSigma Pulse is the **Choppiness Index (CI)**. The algorithm uses this to quantify the "Fractal Dimension" of price action. * **Trend Mode (Green/Red Background):** If the Chop Index falls below a specific threshold (default 50), the system declares a Trend. The chart background lights up Green (Bullish) or Red (Bearish), permitting breakout strategies. * **Chop Mode (Grey Background):** If the Chop Index rises above the threshold, the background turns Grey. This signals consolidation, warning the trader to ignore breakout signals and focus on mean reversion. ### 2. The Consensus Engine (The Vote) To determine momentum direction, the indicator employs a proprietary "Voting System" that aggregates three independent indicators: **ADX** (Trend Strength), **RSI** (Momentum), and **SuperTrend** (Price Action). * **The "2-out-of-3" Rule:** A directional signal (e.g., a Green Cloud) is only generated if at least **two** of these three engines agree. This consensus mechanism filters out "fake-outs" where price might move (SuperTrend) but lacks the internal energy (ADX) to sustain the move. ### 3. The Volatility Engine (The Cloud) The tool visualises volatility through a **Dynamic Range**—a shaded cloud that expands and contracts based on market noise. * It typically uses **Bollinger Bands** (based on Standard Deviation) or **Keltner Channels** (based on ATR). * **In Trends:** The cloud expands, and the bottom of the cloud acts as a dynamic trailing stop. * **In Chop:** The cloud contracts, creating a visual channel where traders can "buy the dip" (Diamond signals) at the bottom of the range. ### Key Features and Defaults * **Institutional Tuning:** The indicator is hardcoded with "smart" defaults rather than standard retail settings. For example, it utilizes an **EMA 27** (a Fibonacci-adjacent number) rather than the standard 20 or 50 Moving Average, designed to catch institutional trends earlier. * **Multi-Timeframe (MTF) Stack:** It automatically plots higher-timeframe Moving Averages (e.g., Weekly and Monthly lines) onto the Daily chart. This allows traders to ensure their trades align with the dominant structural trend without switching tabs. * **Signal Shapes:** * **Triangles:** Signal a **Breakout** (Trend Following). * **Diamonds:** Signal a **Mean Reversion** entry (buying the bottom of the range in a pullback). ### Analogy Think of the zSigma Pulse Navigator as a **sophisticated voltmeter** for the market. Just as you wouldn't plug a sensitive appliance into an unstable power outlet, this tool measures the "current" of the market. If the volatility is erratic (Grey/Chop), it cuts the circuit to protect your capital. It only gives you the "Green Light" to trade when the voltage (Momentum) is stable and flowing in one direction.
Pine Script® indicator
by SigmaPulseNavigator
Account GuardianAccount Guardian: Dynamic Risk/Reward Overlay Introduction Account Guardian is an open-source indicator for TradingView designed to help traders evaluate trade setups before entering positions. It automatically calculates Risk-to-Reward ratios based on market structure, displays visual Stop Loss and Take Profit zones, and provides real-time position sizing recommendations. The indicator addresses a fundamental question every trader should ask before entering a trade: "Does this setup make mathematical sense?" Account Guardian answers this question visually and numerically, helping traders avoid impulsive entries with poor risk profiles. Core Functionality Account Guardian performs four primary functions: Detects swing highs and swing lows to identify logical stop loss placement levels Calculates Risk-to-Reward ratios for both long and short setups in real-time Displays visual SL/TP zones on the chart for immediate trade planning Computes position sizing based on your account size and risk tolerance The goal is to provide traders with instant feedback on whether a potential trade meets their minimum risk/reward criteria before committing capital. How It Works Swing Detection The indicator uses pivot point detection to identify recent swing highs and swing lows on the chart. These swing points serve as logical areas for stop loss placement: For Long Trades: The most recent swing low becomes the stop loss level. Price breaking below this level would invalidate the bullish thesis. For Short Trades: The most recent swing high becomes the stop loss level. Price breaking above this level would invalidate the bearish thesis. The swing detection lookback period is configurable, allowing you to adjust sensitivity based on your trading timeframe and style. It automatically adjusts the tp and sl when it is applied to your chart so it is always moving up and down! Risk/Reward Calculation Once swing levels are identified, the indicator calculates: Entry Price: Current close price (where you would enter) Stop Loss: Recent swing low (for longs) or swing high (for shorts) Risk: Distance from entry to stop loss Take Profit: Entry plus (Risk × Target Multiplier) R:R Ratio: Reward divided by Risk The R:R ratio is then evaluated against your configured thresholds to determine if the setup is valid, marginal, or poor. Visual Elements SL/TP Zones When enabled, the indicator draws colored boxes on the chart showing: Red Zone: Stop Loss area - the region between your entry and stop loss Green/Gold/Red Zone: Take Profit area - colored based on R:R quality The color coding provides instant visual feedback: Green: R:R meets or exceeds your "Good R:R" threshold (default 3:1) Gold: R:R meets minimum threshold but below "Good" (between 2:1 and 3:1) Red: R:R below minimum threshold - setup should be avoided Swing Point Markers Small circles mark detected swing points on the chart: Green circles: Swing lows (potential support / long SL levels) Red circles: Swing highs (potential resistance / short SL levels) Dashboard Panel The dashboard in the top-right corner displays comprehensive trade planning information: R:R Row: Current Risk-to-Reward ratio for long and short setups Status Row: VALID, OK, BAD, or N/A based on R:R thresholds Stop Loss Row: Exact price level for stop loss placement Take Profit Row: Exact price level for take profit placement Pos Size Row: Recommended position size based on your risk parameters Risk $ Row: Dollar amount at risk per trade Position Sizing Logic The indicator calculates position size using the formula: Position Size = Risk Amount / Risk per Unit Where: Risk Amount = Account Size × (Risk Percentage / 100) Risk per Unit = Entry Price - Stop Loss Price For example, with a $10,000 account risking 1% per trade ($100), if your entry is at 100 and stop loss at 98 (risk of 2 per unit), your position size would be 50 units. Input Parameters Swing Detection: Swing Lookback: Number of bars to look back for pivot detection (default: 10). Higher values find more significant swing points but may be slower to update. Target Multiplier: Multiplier applied to risk to calculate take profit distance (default: 2). A value of 2 means TP is 2× the distance of SL from entry. Risk/Reward Thresholds: Minimum R:R: Minimum acceptable Risk-to-Reward ratio (default: 2.0). Setups below this show as "BAD" in red. Good R:R: Threshold for excellent setups (default: 3.0). Setups at or above this show as "VALID" in green. Account Settings: Account Size ($): Your trading account size in dollars (default: 10,000). Used for position sizing calculations. Risk Per Trade (%): Percentage of account to risk per trade (default: 1.0%). Professional traders typically risk 0.5-2% per trade. Display: Show SL/TP Zones: Toggle visibility of the colored zone boxes on chart (default: enabled) Show Dashboard: Toggle visibility of the information panel (default: enabled) Analyze Direction: Choose to analyze Long only, Short only, or Both directions (default: Both) How to Use This Indicator Basic Workflow: Add the indicator to your chart Configure your account size and risk percentage in the settings Set your minimum and good R:R thresholds based on your trading rules Look at the dashboard to see current R:R for potential long and short entries Only consider trades where the status shows "VALID" or at minimum "OK" Use the displayed SL and TP levels for your order placement Use the position size recommendation to determine lot/contract size Interpreting the Dashboard: VALID (Green): Excellent setup - R:R meets your "Good" threshold. This is the ideal scenario for taking a trade. OK (Gold): Acceptable setup - R:R meets minimum but isn't optimal. Consider taking if other confluence factors align. BAD (Red): Poor setup - R:R below minimum threshold. Avoid this trade or wait for better entry. N/A (Gray): Cannot calculate - usually means no valid swing point detected yet. Best Practices: Use this indicator as a filter, not a signal generator. It tells you IF a trade makes sense, not WHEN to enter. Combine with your existing entry strategy - use Account Guardian to validate setups from other analysis. Adjust the swing lookback based on your timeframe. Lower timeframes may need smaller lookback values. Be honest with your account size input - accurate position sizing requires accurate inputs. Consider the target multiplier carefully. Higher multipliers mean larger potential reward but lower probability of hitting TP. Alerts The indicator includes four alert conditions: Good Long Setup: Triggers when long R:R reaches or exceeds your "Good R:R" threshold Good Short Setup: Triggers when short R:R reaches or exceeds your "Good R:R" threshold Bad Long Setup: Triggers when long R:R falls below your minimum threshold Bad Short Setup: Triggers when short R:R falls below your minimum threshold These alerts can help you monitor multiple charts and get notified when favorable setups appear. Technical Implementation The indicator is built using Pine Script v6 and includes: Pivot-based swing detection using ta.pivothigh() and ta.pivotlow() Dynamic box drawing for visual SL/TP zones Table-based dashboard for clean information display Color-coded visual feedback system Persistent variable tracking for swing levels Code Structure: // Swing Detection float swingHi = ta.pivothigh(high, swingLen, swingLen) float swingLo = ta.pivotlow(low, swingLen, swingLen) // R:R Calculation for Long float longSL = recentSwingLo float longRisk = entry - longSL float longTP = entry + (longRisk * targetMult) float longRR = (longTP - entry) / longRisk // Position Sizing float riskAmount = accountSize * (riskPct / 100) float posSize = riskAmount / longRisk Limitations The indicator uses historical swing points which may not always represent optimal SL placement for your specific strategy Position sizing assumes you can trade fractional units - adjust accordingly for instruments with minimum lot sizes R:R calculations assume linear price movement and don't account for gaps or slippage The indicator doesn't predict price direction - it only evaluates the mathematical viability of a setup Swing detection has inherent lag due to the lookback period required for pivot confirmation Recommended Settings by Trading Style Scalping (1-5 minute charts): Swing Lookback: 5-8 Target Multiplier: 1-2 Minimum R:R: 1.5 Good R:R: 2.0 Day Trading (15-60 minute charts): Swing Lookback: 8-12 Target Multiplier: 2 Minimum R:R: 2.0 Good R:R: 3.0 Swing Trading (4H-Daily charts): Swing Lookback: 10-20 Target Multiplier: 2-3 Minimum R:R: 2.5 Good R:R: 4.0 Why Risk/Reward Matters Many traders focus solely on win rate, but profitability depends on the combination of win rate AND risk/reward ratio. Consider these scenarios: 50% win rate with 1:1 R:R = Breakeven (before costs) 50% win rate with 2:1 R:R = Profitable 40% win rate with 3:1 R:R = Profitable 60% win rate with 1:2 R:R = Losing money Account Guardian helps ensure you only take trades where the math works in your favor, even if you're wrong more often than you're right. Disclaimer This indicator is provided for educational and informational purposes only. It is not intended as financial, investment, trading, or any other type of advice or recommendation. Trading involves substantial risk of loss and is not suitable for all investors. The calculations provided by this indicator are based on historical price data and mathematical formulas that may not accurately predict future price movements. Position sizing recommendations are estimates based on user inputs and should be verified before placing actual trades. Always consider factors such as leverage, margin requirements, and broker-specific rules when determining actual position sizes. The Risk-to-Reward ratios displayed are theoretical calculations based on swing point detection. Actual trade outcomes will vary based on market conditions, execution quality, and other factors not captured by this indicator. Past performance does not guarantee future results. Users should thoroughly test any trading approach in a demo environment before risking real capital. The authors and publishers of this indicator are not responsible for any losses or damages arising from its use. Always consult with a qualified financial advisor before making investment decisions.
Pine Script® indicator
by officialjackofalltrades
MARAL Execution WorkflowOverview MARAL Execution Workflow is a discretionary execution decision-support indicator designed to organize market context into a consistent workflow. It is not an automated trading system, does not place orders, and does not predict outcomes. Meaning of MARAL: Market Alignment + Risk Awareness + Logic-based execution gating — a structured workflow framework designed to improve clarity and consistency in discretionary execution. This tool supports discretionary decision-making across three stages: Context → Qualification → Management. It extends analysis beyond entry by supporting post-entry decisions such as: Should I stay? Should I reduce risk? Should I exit? Or should I wait? These are decision-support questions, not predictions. Key Features 9-Layer Framework + 3 Boards + EDC The script uses a 9-layer framework coordinated by a centralized decision-state layer (EDC). Each layer has a defined role: 1. Directional Context (Trend/Bias Layer) — establishes a directional preference using configurable bias filters. 2. Higher-Timeframe Context (HTF Layer) — anchors execution to broader context when enabled. 3. Structure Mapping (Swing/Structure Layer) — identifies structural behavior (highs/lows) to frame decision areas. 4. Location / Proximity Awareness (Obstacle Layer) — evaluates proximity to likely reaction areas for risk awareness. 5. Momentum Quality (Momentum Layer) — distinguishes healthier follow-through vs weakening/choppy conditions. 6. Volatility / Stability Regime (VOL/REGIMI) evaluates volatility using ATR% thresholds and regime support using ADX. 7. Pre-Entry Qualification (Checklist Layer) — confirms whether minimum execution conditions are satisfied before entry. 8. Post-Entry Management Context (Management Layer) — monitors changing conditions after a setup for discretionary management. 9. Liquidity Context (Liquidity Layer) — integrates liquidity-based location context using PDH/PDL proximity, sweep/reclaim behavior, and lookback extreme breaks. When enabled, the script may also plot liquidity reference points for visual mapping. Liquidity Regime States (Panel Output) The Liquidity Layer displays a 3-state liquidity regime used for execution risk awareness: • HIGH — a liquidity event is detected (e.g., sweep/reclaim or lookback extreme break). • NEUTRAL — no event, but liquidity is nearby (proximity to PDH/PDL within a defined threshold). • LOW — no event and no nearby liquidity pressure detected. These are context/risk states used for discretionary gating — not buy/sell signals and not outcome predictions. Boards • Context Board — summarizes direction, HTF context, structure, momentum, volatility (ATR%), trend regime (ADX), scores, and liquidity context. • Qualification Gate — rule-based checklist view to confirm minimum execution conditions before entry. • Management Desk — post-setup view to monitor risk changes, obstacle proximity, deterioration cues, and management states. EDC — Execution Decision Core EDC consolidates outputs from the framework into unified workflow states. It applies rule-based gating to reduce conflict when conditions are mixed. EDC Unified Output States (Decision-Support Only): • SETUP: WAIT / LONG / SHORT • ENTRY PERMISSION: ENTER / WAIT / SKIP • LIQUIDITY: HIGH / NEUTRAL / LOW • TRADE STATUS: VALID / RISKY / WEAK / — • ACTION STATE: HOLD / TIGHT SL / SCALE OUT / EXIT / — — may appear when a state is not applicable (e.g., no active management window is being tracked). Panels & Labels (Exact On-Chart Meanings) 1) Context Board (Market Environment Snapshot) • DIRECTION → Bullish / Bearish / Neutral • H1 CONTEXT / H4 CONTEXT / DAILY CONTEXT → HTF bias states (when enabled). If HTF is disabled, shows OFF. • STRUCTURE → Bull Struct / Bear Struct / Neutral Struct • MOMENTUM → BULL / BEAR / NEUTRAL • VOLATILITY (ATR%) → ATR as a percentage of price (volatility context) • TREND STRENGTH → ADX context value • LONG SCORE / SHORT SCORE → internal workflow alignment scores (0–100) with grade: A++ / A+ / A / B / No-Trade • ALIGNMENT SCORE → combined alignment score used for gating • LIQUIDITY CONTEXT → HIGH / NEUTRAL / LOW Important: Scores are internal workflow scoring for filtering/alignment. They are not performance statistics and do not imply guaranteed probability or outcomes. 2) Qualification Gate (Pre-Entry Checklist) Gate Legend: OK = passes filter, WARN = mixed/caution, BAD = fails filter (execution gated). • SETUP → WAIT / LONG / SHORT • HTF CONTEXT → OK / WARN / BAD / — • STRUCTURE → OK / WARN / BAD / — • MOMENTUM → OK / WARN / BAD / — • VOL/REGIME → OK / WARN / BAD / — (Volatility + regime filter; not volume) o OK = ATR% within thresholds AND ADX meets regime requirement o WARN = ATR% within thresholds but regime is mixed (ADX below threshold) o BAD = ATR% outside thresholds • LIQUIDITY → HIGH / NEUTRAL / LOW • ALIGNMENT → shows score vs required minimum threshold • ENTRY PERMISSION → ENTER / WAIT / SKIP Purpose: reduce forced entries by requiring minimum execution quality. 3) Management Desk (Post-Setup Decision Support) The Management Desk operates inside an Active Window measured in bars after the last setup (configurable by input). When the management window is not active, some fields may show —. • TRADE STATUS → VALID / RISKY / WEAK / — — appears when no active trade state is being tracked (not applicable). • MARKET PHASE → RANGE / IMPULSE / PULLBACK / CONTINUATION Environment classification used for management context (not prediction). • OBSTACLE AHEAD → YES / NO Proximity risk context (e.g., near PDH/PDL or near swing levels under the script’s logic). • EXIT PRESSURE → LOW / RISING / HIGH Management pressure context based on deterioration cues (not a signal). • MOMENTUM HEALTH → STRONG / WEAKENING / WEAK / NEUTRAL Follow-through quality context used for management. • SCORE TREND → IMPROVING / DETERIORATING / STABLE Direction of the internal workflow score trend (not P&L, not performance). • RISK STATE → OVEREXTENDED / NORMAL Overextension context based on distance from EMA vs ATR. • TRADE AGE → FRESH / MID / LATE / — Workflow age based on bars since last setup. — when not applicable. • SL MODE → BE OK / TIGHT / NORMAL / — Stop-management context used for discretionary risk control. — when not applicable. • ACTION STATE → HOLD / TIGHT SL / SCALE OUT / EXIT / — o HOLD = maintain the current plan under present conditions o TIGHT SL = discretionary prompt to reduce risk by tightening protection o SCALE OUT = discretionary prompt to partially reduce exposure (partial exit / trim size), typically when obstacle proximity risk is detected o EXIT = discretionary prompt that conditions deteriorated and exit may be considered o — = not applicable • ACTIVE WINDOW → ON / OFF Shows whether the post-setup management window is active (bars after the last setup, per the “Active Window” input). When OFF, management/trade states may show —. Optional Modules (Toggleable) To keep the chart clean and workflow-focused, optional modules can be enabled/disabled: A) PDH/PDL Reference (Optional) • Plots Previous Day High / Previous Day Low as structured reference points (risk awareness only). B) ATR-Based Planning Guides (Optional) • Optional visual guides for SL / TP1 / TP2 / TP3 based on ATR. • Visual planning references only. Does not place orders and does not guarantee outcomes. C) Visual Color Layer (Optional) • Optional state-based candle coloring for readability only. D) State Markers (Optional) • Optional state markers (e.g., LONG/SHORT confirmations). These are state confirmations only, not trade recommendations. Display & Layout Options • Display Mode: Mobile / Medium / Desktop • Mobile Minimal View: optional minimal mode (EDC-only) • Panel Positioning: 9 anchor positions (Top Left / Top Center / Top Right / Middle Left / Middle Center / Middle Right / Bottom Left / Bottom Center / Bottom Right) Why This Is Not a “Mashup” This publication is not intended to bundle multiple classic indicators as independent buy/sell tools. While it uses familiar building blocks (trend/bias filtering, volatility/regime context, structure references, liquidity context), each component has a defined role inside a single execution workflow: • Context Board → Qualification Gate → Management Desk organizes information into a consistent discretionary process. • EDC consolidates multi-layer conditions into unified states using rule-based gating to reduce conflict and prioritize risk awareness. This is a decision-support framework designed to improve clarity and consistency in discretionary execution. It does not place orders and does not provide guaranteed outcomes. How to Use (Recommended Workflow) 1. Set context: Use the Context Board to determine directional preference, volatility/regime stability, and location context. 2. Qualify execution: Use the Qualification Gate as the filter. If alignment is not sufficient, avoid forcing entries. 3. Execute with location awareness: Avoid late entries into nearby obstacles. Treat proximity as increased risk. 4. Manage post-setup: Use the Management Desk to monitor risk changes. If states deteriorate, follow your plan (reduce risk, protect, or exit). 5. Stay consistent: Works best with position sizing rules and disciplined confirmation. Screenshots / Visual Reference (What each panel shows) Screenshot 1 — Full Workflow View (Desktop) Shows the complete workflow layout on one chart: Context Board, Qualification Gate, Management Desk, and the EDC (Execution Decision Core) summary together. Screenshot 2 — Context Board Shows directional context, HTF context (if enabled), structure mapping, momentum quality, volatility/stability regime (ATR + ADX), and liquidity context (HIGH/NEUTRAL/LOW). This board is used to understand “market alignment” before considering execution. Screenshot 3 — Qualification Gate (Pre-Entry) Shows the rule-based checklist view used for discretionary pre-entry qualification. It summarizes SETUP (WAIT/LONG/SHORT), key confluence checks, liquidity context, and ENTRY PERMISSION (ENTER/WAIT/SKIP). This is a gating view—meant to prevent forced entries when alignment is insufficient. Screenshot 4 — Management Desk (Post-Entry) Shows post-entry condition monitoring within the active window after the last setup. It highlights trade status shifts (VALID/RISKY/WEAK), obstacle proximity, exit pressure, momentum health, score trend, risk state, SL mode, and action guidance context. Screenshot 5 — EDC Panel (Execution Decision Core) — Centralized State Shows the unified decision-support outputs consolidated from the workflow layers and boards into one compact view: • SETUP: WAIT / LONG / SHORT • ENTRY PERMISSION: ENTER / WAIT / SKIP • LIQUIDITY: HIGH / NEUTRAL / LOW • TRADE STATUS: VALID / RISKY / WEAK • ACTION STATE: HOLD / TIGHT SL / SCALE OUT / EXIT These are rule-based guidance states for discretionary execution and risk awareness — not automated actions. Screenshot 6 — Example –Execution context The screenshot shows MARAL Execution Workflow applied to XAUUSD on the 1-hour timeframe. All three boards and the EDC panel are visible: • Context Board (top-right) – Confirms a fully aligned bullish environment: direction and all HTF contexts are Bullish, structure is “Bull Struct”, momentum is “BULL”, volatility (ATR%) is within normal bounds, and the long-side alignment score is high while the short-side score is in “No-Trade” territory. Liquidity Context is “LOW”, indicating limited immediate liquidity pressure. • Qualification Gate (top-center) – For the same bar, the checklist produces a LONG setup with HTF CONTEXT, STRUCTURE, MOMENTUM and VOL/REGIME all marked OK. Liquidity is LOW, and ALIGNMENT shows “93 / 65”, meaning the current long-side score (93) is above the user-defined minimum threshold (65). ENTRY PERMISSION = ENTER, signaling that, within this framework, execution conditions are sufficiently aligned to allow a discretionary long entry according to the trader’s own plan. • Management Desk (left) – Once a trade is active, the post-entry view monitors evolving risk. In this example the trade status is VALID and MARKET PHASE is CONTINUATION, while RISK STATE highlights OVEREXTENDED and TRADE AGE is FRESH. MOMENTUM HEALTH = STRONG, SCORE TREND = STABLE, and ACTION STATE = HOLD. This illustrates how the panel can flag extension or emerging pressure without forcing a decision. • EDC | Execution Decision Core (bottom-right) – The EDC panel consolidates the key states into one unified view: SETUP = LONG, ENTRY PERMISSION = ENTER, LIQUIDITY = LOW, TRADE STATUS = VALID, ACTION STATE = HOLD. These are rule-based guidelines summarizing the interaction between Context, Qualification, Management and liquidity conditions. They are decision-support outputs only; they do not place orders and do not imply any guaranteed outcome. Inputs & Customization Inputs are provided to adapt the workflow to different instruments and timeframes, including: • bias/trend parameters and smoothing, optional HTF context, • structure sensitivity and lookback, • momentum thresholds, • volatility thresholds (ATR% limits) and regime filter (ADX), • liquidity sensitivity (lookback / proximity thresholds), • visuals (show/hide boards, display mode, mobile minimal view, text size, positioning). Markets & Timeframes Designed for multiple markets and instruments available on Trading View, including: • Indices (index charts / index futures where available — not an options-chain or options-pricing tool) • Crypto • Forex • Stocks / ETFs • Commodities Timeframe-agnostic: can be applied from lower to higher timeframes based on your trading style. Results vary by instrument, timeframe, and volatility/regime. Limitations (Important) • Discretionary analysis tool only; does not place trades. • Optional markers/labels (if enabled) are state confirmations only, not recommendations. • HTF values can update as HTF candles develop. • Structure/obstacle references are informational decision areas and may be exceeded. • No indicator removes risk; risk management remains essential. • Provided “as-is.” Outputs may differ across symbols, sessions, spreads, or data feeds. Risk & Disclaimer Trading involves risk. Past behavior does not indicate future performance. This script is provided for educational and analytical purposes only. You are responsible for all trading decisions, including entries, exits, position sizing, and risk management. The script does not place trades and does not provide investment advice.
Pine Script® indicator
by MARAL_Execution_Workflow
Multi-Timeframe Close and Midpoint ConfluenceMulti-Timeframe Close Monitoring and Price Midpoint Confluence Indicator This indicator is designed to assist traders in monitoring multiple timeframe candle closes and identifying areas where price midpoints (50% levels) from different timeframes cluster together. The tool focuses on timing awareness and structural context, helping users observe periods where multiple timeframe events occur close together, which may coincide with increased market activity. What the Indicator Tracks The indicator monitors candle close timing and price context across multiple timeframes, including: Intraday timeframe closes (30m, 1h, 2h, 3h, 4h, 6h, 8h) Higher-timeframe closes (Daily, Weekly, Monthly) when within a defined scan window The midpoint (50%) of the previous candle for each tracked timeframe The distance between current price and each midpoint level This information is evaluated independently for each timeframe. Timeframe Close Confluence When multiple timeframes are approaching a candle close within a short window, the indicator highlights this period visually. These moments can be useful for observing potential shifts in activity or volatility, particularly when combined with other forms of analysis. Visual markers and optional alerts are used to draw attention to these timing clusters. Midpoint (50%) Level Clustering The indicator also evaluates whether multiple 50% levels from different timeframes are located within a user-defined proximity. When several midpoints cluster closely together, the area is highlighted as a zone of interest for further observation, as overlapping price references may act as areas of interaction. Countdown & Information Panel An optional on-chart panel displays: A live countdown to upcoming timeframe closes Relative urgency based on proximity to each close Whether current price is above or below each midpoint Distance metrics to help gauge proximity Color coding is used to improve readability rather than indicate trade direction. Visual Context Tools Additional visual options include: Background shading when multiple timing or midpoint conditions overlap Adjustable thresholds to control sensitivity Customizable colors, opacity, and panel placement These visuals are intended to provide contextual awareness, not trade signals. Intended Use Style: Multi-timeframe analysis and timing awareness Markets: Forex, crypto, equities, futures Purpose: Monitor upcoming timeframe closes Observe overlapping price reference zones Improve preparation around potential activity windows The indicator is best used as a supplementary tool alongside independent analysis. Important Notes This script is provided for educational and analytical purposes only. It does not predict market outcomes and should not be used as a standalone decision-making tool. Users are encouraged to apply appropriate risk controls and confirm observations with additional analysis.
Pine Script® indicator
by Marketscannerpros
SVEA - Smart Valuation & Analysis [Gabremoku]SVEA is a smart overbought/oversold map that paints dynamic price zones and reversal signals directly on the chart using RSI and ATR‑based volatility bands.📈✨ ​ 🧠 Smart context: Automatically adapts OB/OS levels to asset type and timeframe (equities, crypto, forex, 15m) for more realistic signals. ​ 🎯 Actionable zones: Highlights continuous OB/OS price areas as dynamic support/resistance, helping to spot stretched moves and potential reversals at a glance. ​ 🌡️ Volatility‑aware: Uses ATR‑driven padding so zones expand in high volatility and contract in calm markets, keeping signals relevant across regimes. ​ 🛠️ Fully customizable: Fine‑tune OB/OS levels, lookback, padding, and visibility to match your strategy and preferred signal frequency. ​
Pine Script® indicator
by Gabremoku
Multi-Group Trend Boxes with POC Trend Line - XWiseTradeAdvanced multi-timeframe trend structure visualization. This indicator creates three independent groups of trend boxes, each with: • Custom bar count and lower timeframe POC calculation • Automatic up/down/sideways coloring • Connecting POC trend line Perfect for: • Multi-timeframe confluence analysis • Identifying trend strength across scales • Clean structural price action mapping Features: • 3 fully customizable groups (short/medium/long term) • Dynamic POC-based trend lines • Transparent colored boxes • High performance with object management More premium indicators and strategies coming soon at: xwisetrade.com Be Wise. Trade X.
Pine Script® indicator
by xwisetrade
The Beast (Main)This Indicator combines Trendline Break + Z-Score + Adaptive Re-Entry 🔥 Quick Start Trade trendline breakouts only Confirm entries with Z-Score momentum Optional adaptive re-entries (✕) after pullbacks Clean signals, no clutter, no repaint Works best when paired with the Z-Score Oscillator Companion 🚀 Overview This indicator is a clean, rule-based breakout and continuation system designed to highlight high-quality trend trades while avoiding noise and overtrading. It combines: Structural trendline breaks Statistical momentum (Z-Score) Adaptive re-entry logic based on timeframe behavior The result is a disciplined, professional signal framework focused on clarity and confidence rather than signal quantity. 🧠 How It Works 1️⃣ Trendline Break (Structure First) Signals are only considered after price breaks a dynamically calculated trendline based on swing highs/lows. This ensures alignment with real market structure. 2️⃣ Z-Score Momentum Confirmation After a break: BUY → Z-Score ≥ positive threshold SELL → Z-Score ≤ negative threshold This filters out weak moves and confirms statistical momentum, not guesswork. 3️⃣ Controlled Timing Window Signals are valid only for a limited number of bars after the break. This avoids late entries and stale setups. 🔁 Adaptive Re-Entries (Optional) Re-entries allow controlled continuation trades in strong trends. Marked with a ✕ (cross) for clear distinction Always occur after a pullback Printed one bar after confirmation (non-repainting) Timeframe-aware modes: Auto (Recommended) Low / Mid / High TF Off A max re-entry limit prevents overexposure. 🔄 Alternate Signal Protection An optional filter prevents: BUY → BUY → BUY SELL → SELL → SELL This enforces signal discipline and avoids overtrading. 🎨 Visual Design Primary entries: Arrow or Label (user choice) Re-entries: ✕ only (always discreet) Adjustable transparency for clean charts 🛠 Best Use Trend-focused markets Crypto, Forex, Indices, Futures Intraday and Swing trading Combine with "The Beast (Adaptive Companion)" for maximum clarity.
Pine Script® indicator
by cato_kjoita
Multi-Fractal Trading Plan [Gemini] v22Multi-Fractal Trading Plan The Multi-Fractal Trading Plan is a quantitative market structure engine designed to filter noise and generate actionable daily strategies. Unlike standard auto-trendline indicators that clutter charts with irrelevant data, this system utilizes Fractal Geometry to categorize market liquidity into three institutional layers: Minor (Intraday), Medium (Swing), and Major (Institutional). This tool functions as a Strategic Advisor, not just a drawing tool. It calculates the delta between price and structural pivots in real-time, alerting you when price enters high-probability "Hot Zones" and generating a live trading plan on your dashboard. Core Features 1. Three-Tier Fractal Engine The algorithm tracks 15 distinct fractal lengths simultaneously, aggregating them into a clean hierarchy: Minor Structure (Thin Lines): Captures high-frequency volatility for scalping. Medium Structure (Medium Lines): Identifies significant swing points and intermediate targets. Major Structure (Thick Lines): Maps the "Institutional" defense lines where trend reversals and major breakouts occur. 2. The Strategic Dashboard A dynamic data panel in the bottom-right eliminates analysis paralysis: Floor & Ceiling Targets: Displays the precise price levels of the nearest Support and Resistance. AI Logic Output: The script analyzes market conditions to generate a specific command, such as "WATCH FOR BREAKOUT", "Near Lows (Look Long?)", or "WAIT (No Setup)". 3. "Hot Zone" Detection Never miss a critical test of structure. Dynamic Alerting: When price trades within 1% (adjustable) of a Major Trend Line, the indicator’s labels turn Bright Yellow and flash a warning (e.g., "⚠️ WATCH: MAJOR RES"). Focus: This visual cue highlights the exact moment execution is required, reducing screen fatigue. 4. The Quant Web & Markers Pivot Validation: Deep blue fractal markers (▲/▼) identify the exact candles responsible for the structure. Inter-Timeframe Web: Faint dotted lines connect Minor pivots directly to Major pivots, visualizing the "hidden" elasticity between short-term noise and long-term trend anchors. 5. Enterprise Stability Engine Engineered to solve the "Vertical Line" and "1970 Epoch" glitches common in Pine Script trend indicators. This engine is optimized for Futures (NQ/ES), Forex, and Crypto, ensuring stability across all timeframes (including gaps on ETH/RTH charts). Operational Guide Consult the Dashboard: Before executing, check the "Strategy" output. If it says "WAIT", the market is in chop. If it says "WATCH FOR BOUNCE", prepare your entry criteria. Monitor Hot Zones: A Yellow Label indicates price is testing a major liquidity level. This is your signal to watch for a rejection wick or a high-volume breakout. Utilize the Web: Use the faint web lines to find "confluence" where a short-term pullback aligns with a long-term trend line. Configuration Show History: Toggles "Ghost Lines" (Blue) to display historical structure and broken trends. Fractal Points: Toggles the geometric pivot markers. Hot Zone %: Adjusts the sensitivity of the Yellow Warning system (Default: 1%). Max Line Length: A noise filter that removes stale or "spiderweb" lines that are no longer statistically relevant.
Pine Script® indicator
by CustomQuantLabs
2
S.EQ - Macro TrackerMacro Tracker Indicator - Description This TradingView indicator visualizes macro time windows throughout the trading day, marking specific 33-minute periods that occur hourly (from XX:42 to XX:15 of the next hour) in the America/New_York timezone. Core Functionality Time Windows Tracked: The indicator monitors 24 hourly macro periods (e.g., 00:42-01:15, 01:42-02:15, etc.) Each period spans 33 minutes, starting at 42 minutes past the hour and ending at 15 minutes past the next hour Special periods for the last trading hour (14:42-15:15, 15:42-16:15) with an optional 15:15-15:45 window --------------------------------------------------------------------------------- Visual Display Modes 1. On Chart Mode (Default) Draws vertical lines at the start and end of each macro period Displays a horizontal line at the top connecting the boundaries Shows optional labels with time stamps at the midpoint Midline Feature: Adds a dotted vertical line at XX:00 (the hour mark) within each macro period Projects dotted extension lines toward current price action when enabled Dynamically adjusts line heights based on price movement within the period 2. New Pane Mode Displays macro periods as colored boxes in a separate indicator pane Useful for cleaner chart visualization when tracking multiple periods --------------------------------------------------------------------------------- Key Features Customizable Display: Toggle individual macro periods on/off, choose colors, and control label visibility Time Labels: Optional display of exact time ranges on each macro period Projections: Extension lines that project from macro boundaries toward current price Midline Markers: Dotted lines showing the hour mark (XX:00) within each macro period Weekend Handling: Automatically adjusts for Friday closes and weekend gaps (non-crypto markets) Memory Management: Automatically cleans up old drawing objects to maintain performance
Pine Script® indicator
by Saint-EQ