Get started

NASDAQ 100 E-MINI FUTURES

FREEDOM - TJR Model\ FREEDOM – TJR Model\ 🚀 \ Automates TJR’s well-known NQ playbook with clean visuals, filters, and alerts—so you can focus on execution.\ \ Core idea\ 1. Trade \ NQ\ in the \ New York session\ 🗽 2. Wait for a \ liquidity sweep\ of a \ prior session\ High/Low (Asia or London) ✂️ 3. Confirm with \ SMT (NQ vs ES) divergence\ 🔀 4. Act on a \ proprietary entry signal\ 🔒 5. Risk at the swing 🛡️, target \ untapped internal/session liquidity\ 🎯 This indicator draws those session levels for you, tracks sweeps, detects SMT, applies higher-timeframe confluence, and fires alerts that respect your time window and filters. --- \ What it draws & detects\ \ • Sessions & Liquidity Sweeps\ 🕒 * Plots \ Asia / London / New York\ session bands. * On session close, it freezes the session’s \ High/Low\ as dotted “previous-session levels” and \ extends them forward\ until price \ crosses\ (choose \ Wicks\ or \ Close\ ). * When price takes a previous-session \ High\ → \ Buyside sweep\ ; takes a \ Low\ → \ Sellside sweep\ . * Optional \ Sweep Zones\ expand around the swept level using an \ ATR(21)\ margin; can auto-fade “fake” sweeps. \ Tip: Keep “Extend previous session High/Low until cross” ON to maintain a clean roadmap into NY open.\ \ • SMT Divergence (NQ vs ES)\ 🔀 * Classic pivot-to-pivot SMT: * \ Bearish SMT\ = NQ makes a \ higher high\ while ES does \ not\ . * \ Bullish SMT\ = NQ makes a \ lower low\ while ES does \ not\ . * Draws \ lines\ from pivot to pivot (no chart spam), with optional inline “SMT” label and optional confidence \ score\ (0–100) based on strength + recency. * Context aware: * Only shows \ Bearish SMT\ after a \ buy-side sweep\ (previous-session High taken). * Only shows \ Bullish SMT\ after a \ sell-side sweep\ (previous-session Low taken). * Respects your \ NY time window\ if enabled. \ • Proprietary Entry Signals\ 🔒 * Prints entry lines + arrows only when your rules align (proprietary detection under the hood). * Respects: * \ Session-sweep bias\ (optional): Sells only after buy-side sweep; Buys only after sell-side sweep. * \ Monotonic filter\ : new Sell must be \ higher\ than last Sell; new Buy must be \ lower\ than last Buy (resets each session). * \ Minimum distance\ to nearest previous-session dotted level (in ticks). * \ NY time filter\ window. * \ HTF confluence\ (see below). --- \ HTF Confluence (optional)\ 📈 * Choose \ MA slope\ (\ EMA/SMA/RMA/WMA\ ) or \ HH/HL structure\ on a higher timeframe (e.g., 60m/240m). * Entry arrows and alerts can be gated so they only print when HTF bias agrees with the setup. \ Tip: Start with EMA 50 on 60m for a smooth directional filter; add HH/HL only if you want stricter structure confirmation.\ --- \ Dashboard (bottom-right)\ 🧩 * \ VWAP state\ : * \ Overbought\ (🔴) if close > VWAP + (mult × stdev) * \ Oversold\ (🟢) if close < VWAP − (mult × stdev) * Otherwise \ Neutral\ (⚪️) * \ Premium / Discount\ vs previous-session 50% midline: Premium = above (red bias), Discount = below (green bias). * \ SMT row\ : Bullish / Bearish / Neutral with optional score. --- \ How to use the settings (quick tour)\ \ ENTRY\ * \ Entry Swing Length\ : lower = more signals. * \ Confirmation\ : \ Candle Close\ or \ Wicks\ for breakout. * \ Filter entry by session sweeps\ : enforces “sell after buy-side sweep, buy after sell-side sweep.” * \ Minimum distance (ticks)\ : blocks entries too close to previous-session dotted levels. * \ Replay mode\ : keeps entries visible in Bar Replay. * \ NY Time filter\ : default \ 08:00–14:00 NY\ ; arrows/alerts respect the window. * \ Arrow offset (ticks)\ : how far above/below the candle to plot the arrow. \ SESSION SWEEPS\ * Toggle \ Buyside/Sellside zones\ , adjust \ ATR(21)\ margin & length. * \ Hide Fake Sweep Zones\ (default ON). * \ Extend H/L until cross\ (Wicks/Close). * Optional \ daily reset\ for unswept dotted lines. \ SESSIONS\ * Enable/disable \ Asia, London, NY AM, NY PM\ ; set start/end; choose color; extend midline if desired. * DST toggles for NY/London. \ HTF Confluence\ * Turn it ON/OFF; pick timeframe & method (MA slope or HH/HL); set MA type/length or swing length. \ Dashboard\ * Show/hide table; set VWAP stdev length/multiplier. * SMT settings: comparison symbol (\ default ES1!\ ), pivot length, show score/labels, recency window, etc. \ Alerts\ (always last) 🔔 * \ Session line cross\ : choose Highs/Lows and crossing mode (\ Same as extension / Wicks / Close\ ). * \ Entry alerts\ : \ Filtered / Unfiltered / Both\ . * \ Filtered\ = respects sweep bias, HTF confluence, minimum distance, monotonic rule, and time window. * \ Unfiltered\ = ignores sweep bias/HTF/monotonic (still respects minimum distance + time window). * All entry alerts also respect the \ NY time window\ when enabled. --- \ Suggested workflow\ * Open NQ on a 1–5m chart. * Let the dotted \ previous-session H/L\ extend into NY; wait for a \ sweep\ . * Check \ SMT\ : after buy-side sweep → look for \ bearish SMT\ ; after sell-side sweep → look for \ bullish SMT\ . * Take the \ proprietary entry\ when filters agree. * Stop at the swing; aim for \ untapped internal/session liquidity\ . * Let \ alerts\ handle the monitoring. --- \ Why traders like it\ * It mirrors the model popularized by \ TJR\ while removing the chart admin: sessions, sweeps, SMT, HTF gating, distances, monotonic sequencing, time windows, and ready-to-use alerts—so your execution stays consistent. ✨ --- \ Disclaimer\ ⚠️ \ This tool is for educational purposes only and does not constitute financial advice. Markets involve risk; always do your own research and test in replay/paper before trading live. FREEDOM – TJR Model is inspired by TJR’s publicly known framework but is not affiliated with, endorsed by, or sponsored by TJR. You are solely responsible for your trading decisions and outcomes.\
Pine Script® indicator
by MrWickTrading
Session Liquidity [TakingProphets]Session Liquidity Session Liquidity maps the intraday landscape that ICT/SMC traders care about: each session’s high/low prints, key opens (Midnight, True Day/6PM, 8:30), and prior period reference levels (Previous Week/Day and optional Mon/Tue/Wed). It auto-draws and extends clean horizontal levels, updates them live, and optionally preserves “mitigated” tags so you can review what price consumed. To keep charts readable, overlapping labels at the same price are merged into a single combined label (e.g., LON.H + PDH + PWH) with smart anti-overlap placement. What it does (at a glance) – Tracks Asia, London, NY AM, NY Lunch, and NY PM session highs/lows in your chosen timezone (default America/New_York). – Draws key opens: Midnight Open, True Day Open (6 PM), and 8:30 Open. – Plots Previous Week High/Low (PWH/PWL) and Previous Day High/Low (PDH/PDL) with optional Mon/Tue/Wed references. – Live extension: lines extend to the current bar; when a level is traded through you can either remove it or keep a left-anchored “mitigated” label. – Combined labels: when multiple levels share the same price, the script shows one label listing all tokens (e.g., LON.L + PWL). – Timeframe governor: a Timeframe Limit hides drawings on higher resolutions to avoid clutter (e.g., show on ≤ 30 min only). – Styling controls: per-feature colors, dotted/dashed/solid styles, and label size/position (session labels left/center/right logic handled via label types and offsets). How it works: – Sessions are defined with TradingView’s session input strings. While you are “in session,” the script updates running highs/lows and stores their bar indices. When the session closes, it freezes the prints and draws two horizontal lines: one at the session high (token “ASIA.H”, “LON.H”, “NYAM.H”, “NYLU.H”, “NYPM.H”) and one at the session low (“…L”). – Prior period levels come from higher-timeframe requests: Previous Week’s High/Low from W, Previous Day from D (plus Mon/Tue/Wed using simple daily offsets). New periods wipe and redraw lines/labels cleanly. – Key opens are stamped exactly when they occur (00:00 for Midnight, 18:00 for True Day, 08:30 for the print), then extended forward. – Mitigation logic: if price trades beyond a level, either remove it entirely (Show Mitigated Levels = off) or stop extending the line and drop a small, persistent left-justified label where mitigation occurred (Show Mitigated Levels = on). – Label combining: on each update, per-level labels are optionally cleared and replaced with one combined label per price level. The script groups by tick index, merges tokens (e.g., LON.H + PDH), and uses a small vertical offset loop to avoid label collisions at the same x-position. Inputs you control – Timeframe Limit: drawings will not appear on charts greater than or equal to this resolution. – Timezone: default America/New_York. – Label Settings – Show Labels / Show Session High/Low Levels. – Show Mitigated Levels: keep a small label where a level was traded through. – Combine overlapping level labels: merge tokens into one label if prices match. – Label sizes for levels and for session start/end text (sizes: Tiny/Small/Normal/Large). – Visual Settings – Colors for level lines and label text. – Styles (Solid/Dashed/Dotted) for Previous Week and Previous Day blocks. – Custom Labels – Rename tokens for each session print (e.g., ASIA.H, LON.L, NYAM.H, etc.) to match your playbook. – Key Opens – Toggle Midnight Open, True Day Open (6 PM), and 8:30 Open lines; customize colors. – Previous Week / Previous Day – Toggle PWH/PWL and PDH/PDL; optionally plot Mon/Tue/Wed reference prints. – Macro Sessions (toodegrees-style bracket) – Toggle two macro windows (9:45–10:15 and 10:45–11:15). – Choose bracket height in ticks, line style, label size/text, and optional price projection. – The bracket is dynamic during its window (extends across the window; top adapts to new highs + chosen height; label centers on completion). How to use it: Pick your Timeframe Limit (e.g., 30) so the map only shows where you execute. Enable the sessions you trade and keep the timezone aligned to your venue. Turn on the prior period levels you care about (PWH/PWL, PDH/PDL, Mon/Tue/Wed). Choose whether to preserve mitigated levels. If you journal, keeping mitigated tags helps with post-session review. Enable combined labels to reduce clutter and spotlight confluence (e.g., LON.H aligning with PDH). Use Macro windows for playbook timing (9:45–10:15, 10:45–11:15) to visualize typical volatility brackets. Practical notes – The indicator is a context and mapping tool; it does not produce signals. Use with your own bias, PD arrays, and execution model. – Very long lookbacks or many toggles can push object limits on lower-powered machines. Use Timeframe Limit and feature toggles to keep things light. – If you use custom sessions, ensure they do not overlap unexpectedly in your timezone. – “Combine labels” intentionally removes per-level labels in favor of one merged label per price level; mitigated labels are preserved by design. What’s unique here – A full intraday “session print” system (Asia/London/NY AM/NY Lunch/NY PM) with clean freezing at session close and live line extension. – True Day/Midnight/8:30 opens integrated into the same framework for a single, coherent liquidity map. – Prior period structure (week/day + optional Mon/Tue/Wed) and toodegrees-style macro windows in one tool. – Robust label merging by tick level with anti-overlap logic so multi-signal confluence is readable at a glance.
Pine Script® indicator
by TakingProphets
AM Range Sniper [jmaxxx]AM Range Sniper Overview AM Range Sniper is a sophisticated morning session trading strategy designed for Micro E-mini Nasdaq-100 Index Futures (MNQ). This strategy capitalizes on the critical 8:30-9:30 AM EST range formation period, implementing precise entry and exit mechanics with advanced risk management. Key Features 🕐 Time-Based Range Analysis Range Definition: Automatically identifies and tracks the 8:30-9:30 AM EST range Trading Window: Active trading from 9:30 AM to 11:00 AM EST (extended for second chance trades) Session Management: Daily reset ensures clean state for each trading session 🎯 Multiple Entry Patterns Breakthrough/Retest: Captures price breakthroughs above range with retest opportunities Long/Short Opportunities: Comprehensive coverage of both directional moves Breakdown: Identifies bearish breakdowns below range support Break Up: Detects bullish breakups above range resistance Range Sweeps: Monitors for range high/low sweeps with reversal entries ⚡ Advanced Risk Management Configurable Stop Losses: Tick-based stop losses for each trade type Take Profit Targets: Automatic target calculations based on range size Hard Close Protection: Automatic position closure at 4 PM EST Second Chance Feature: Optional second trade opportunity if first trade loses 🔧 Professional Features Visual Stop Loss Lines: Real-time stop loss visualization on chart Debug Information Panel: Comprehensive status monitoring Alert Integration: Customizable alert messages for entries/exits Flexible Time Settings: Adjustable for different timezones Strategy Logic Range Formation (8:30-9:30 AM) The strategy monitors the first hour of trading to establish the day's range. This range serves as the foundation for all subsequent trading decisions. Entry Conditions Breakthrough: Price breaks above range high with retest rejection Breakdown: Price breaks below range low with confirmed bearish momentum Break Up: Price breaks above range high with strong bullish confirmation Sweep Entries: Range high/low sweeps followed by reversal signals Risk Management Stop Loss: Configurable tick-based stops for each trade type Take Profit: 1.5x range size targets for breakdown/breakup trades Position Sizing: Percentage-based position sizing Session Limits: Maximum 2 trades per session (with second chance feature) Settings & Customization Core Parameters Enable/disable individual entry patterns Configurable stop loss levels (1-500 ticks) Second chance feature toggle Previous day level integration Visual Customization Customizable stop loss colors and widths Debug panel visibility Range line styling Alert Configuration Custom entry/exit alert messages ***** Automate With ***** APEX NinjaTrader Crosstrade.io ( promo code JMAXXX ) Performance & Reliability Precision Focused: Waits for high-probability setups Risk-Aware: Comprehensive stop loss and position management Session-Based: Clean daily resets prevent carryover issues Professional Grade: Designed for serious traders Ideal For Day Traders: Morning session specialists Futures Traders: MNQ and similar instruments Range Traders: Traders who capitalize on range breakouts Risk-Conscious Traders: Those who prioritize risk management Disclaimer This strategy is for educational and informational purposes. Past performance does not guarantee future results. Always test thoroughly on historical data and paper trading before live implementation. Risk management is crucial - never risk more than you can afford to lose. Created by jmaxxx - Professional trading strategy developer For questions, feedback, or customization requests, please leave a comment below.
Pine Script® strategy
by jmaxxx143
NDX Levels Adjusted to Active TickerThis indicator allows you to plot custom NDX levels directly on the NQ1! (E-mini NASDAQ-100 Futures) chart, automatically adjusting for the spread between NDX and NQ1!. This is particularly useful for traders who perform technical analysis on NDX but execute trades on NQ1!. Features: Input up to three NDX key levels to track (e.g., 23000, 24000, 25000). The script adjusts these levels in real-time based on the current spread between NDX and NQ1! Displays the spread in the chart header for quick reference Plots updated horizontal lines that move with the spread Includes optional labels showing the spread periodically to reduce clutter Supports Multiple Tickers: NQ1!, QQQ, NAS100 and NAS100USD. Ideal for futures traders who want SPX context while trading NQ1!, QQQ, NAS100 or NAS100USD..
Pine Script® indicator
by alejandroveronn
Nasdaq Macro Radar 3.5Nasdaq Macro Radar is an intraday tool that condenses five macro-drivers of the Nasdaq-100 into a single color-coded table: • real-time moves in the 10- and 2-year Treasury yields • dollar strength via the Dollar Index • equity volatility level (VIX) • risk tone in high-yield credit (HYG ETF) • dynamic slope of the 2-10-year curve Each cell flips from neutral to “long” or “short” on the fly, letting you see at a glance whether the macro backdrop is helping trend continuation or signalling a potential reversal. • No extra pane – the table sits directly on your price chart and can be parked in any corner. • All sensitivity thresholds are user-adjustable from Settings. • Built-in alerts for the most critical levels. Designed for scalpers and day-traders who need an instant macro check without juggling multiple charts Nasdaq Macro Radar è un indicatore intraday che sintetizza, in un’unica tabella color-code, cinque motori macro-finanziari chiave per il Nasdaq-100: • movimento dei rendimenti Treasury a 10 a & 2 a • variazioni del Dollar Index • livello della volatilità implicita (VIX) • tono del mercato credito high-yield (ETF HYG) • pendenza dinamica della curva 2-10 a Ogni cella passa dal neutro a “long” o “short” in tempo reale, consentendo di valutare a colpo d’occhio se il contesto macro favorisce prosecuzioni o inversioni del trend di prezzo. • Nessuna finestra separata: la tabella resta sovrapposta al grafico e può essere spostata in qualsiasi angolo. • Parametri di sensibilità completamente regolabili dal pannello Settings. • Alert integrati per le soglie critiche più importanti. Pensato per chi fa scalping o day-trading sul Nasdaq e vuole un check macro immediato senza aprire dieci grafici di supporto.
Pine Script® indicator
by colasantograziano
1
Time Specific Standard Deviation Zones(10 am - 4hr candle)This indicator is designed for intraday traders who want to visualize volatility-based zones around the 10:00 AM New York session open, plotted precisely from 10:00 AM to 2:00 PM EST. ✅ Key Features: 📦 Automatically draws mirrored Standard Deviation (SD) zones: 0.5 SD, 1 SD, 1.5 SD above and below the 10AM open Open Line reference for mean reversion tracking 📐 Internal Fibonacci Levels within each zone: 0.236, 0.382, 0.5, 0.618, 0.786 ⏱️ Works across any timeframe 📊 Ideal for: Breakout traders Volatility compression strategies Statistical mean reversion models 🔧 Built using precise New York session timestamps, ensuring accuracy across time zones and resolutions.
Pine Script® indicator
by saisantosh97
ATR Contract RecommendationATR Contract Recommendation Indicator Version: 1 New Features and Enhancements: ATR Calculation and Smoothing Options: Calculate ATR using a configurable length. Choose from multiple smoothing methods (RMA, SMA, EMA, WMA). Account Size Customization: Select your account size from three options: 50K, 100K, or 150K. The contract recommendation logic adjusts dynamically based on the chosen account size. Instrument-Specific, Customizable Recommendations: Separate sets of customizable ATR thresholds and recommendation texts for each instrument (NQ, ES, YM) and each account size (C = Contract). For example, for NQ: 150K Account: ATR < 5 → "5+C" 5–10 → "5C" 10–15 → "3C" 15–30 → "2C" 30+ → "1C" 100K Account: ATR < 5 → "4C" 5–10 → "2C" 10–15 → "1C" 15–20 → "1C" 20+ → "5C MNQ" 50K Account: ATR < 5 → "2C" 5–20 → "1C" 20+ → "5C MNQ" Similar customizable threshold groups have been added for ES and YM, with instrument-specific suffixes (e.g. "MES" or "MYM") appended when needed. Customizable Display Box (Table): The indicator displays a recommendation box on the chart showing the current ATR value and the recommended contract size. Users can customize the table's position (top left, top right, bottom left, or bottom right). New Feature: Adjustable table size (number of columns and rows) via new input settings. Customize the text color and background color of the recommendation box. Improvements: Enhanced instrument detection and dynamic recommendation output for a more accurate contract sizing suggestion. User Interface Enhancements: Streamlined input groups for thresholds and recommendation texts, allowing for full customization based on account size and instrument.
Pine Script® indicator
by M5V
FXC NQ Opening Range Breakout Strategy V2.4Mechanical Strategy that trades breakouts on NQ futures on the 15min timeframe during the NYSE session. It's designed to manage Apex and Top Step accounts with the lowest risk possible. Risk Disclaimer: Past results as well as strategy tester reports do not indicate future performance. Guarantees do not exist in trading. By using this strategy you risk losing all your money. Important: It only trades on Monday, Wednesday and Friday and takes usually only 1 trade per trading day. It works on the 15min timeframe only. The settings are optimised already for NQ but feel free to change them. How it works: Every selected trading day it measures the range of the first 15min candle after the NYSE open. As soon as price closes above on the 15min timeframe, it will trade the breakout targeting a set risk to reward ratio. SL on the opposite side of the range. It will trail the SL after a set amount of points and uses a buffer of the set amount of points to trail it. Settings: Opening Range Time : This is the time of the day in hours and minutes when the strategy starts looking for trades. It's in the EST/ NY Timezone and set to 9:30-09:45 by default because that's the NYSE open. Session Time : This is the time of the day in hours and minutes until the strategy trades. It's in the EST/ NY Timezone and set to 09:45-14:45 by default. because that's what gave the best results in backtesting. Open trades will get closed automatically once the end of the session is reached. No matter if win or loss. This is just to prevent holding positions over night. Session Border This setting is to select the border color in which the session box will be plotted. Opening Range Box This setting is to select the fill color of the opening range box. Opening Range Border This setting is to select the border color of the session box. Trade Timeframe This setting determines on which timeframe candle has to close outside the opening range box in order to take a trade. It's set to 15min by default because this is what worked by far the best in backtests and live trading. Stop Loss Buffer in Points: This is simply the buffer in points that is added to the SL for safety reasons. If you have it on 0, the SL will be at the exact price of the opposite side of the range. By default it's set to 0 pips because this is what delivered the best results in backtests. Profit Target Factor: This is simply the total SL size in points multiplied by x. Example: If you put 2, you get a 1:2 Risk to Reward Ratio. By Default it's set to 4 because this gave the best results in backtests, because trades always get closed either by trailing SL or because the end of the session is reached. Use Trailing Stop Loss: This setting is to enable/ disable the trailing stop loss. It's enabled by default because this is a fundamental part of the strategy. Trailing Stop Buffer: This setting determines after how many points in profit the trailing SL will be activated. Risk Type: You can chose either between Fixed USD Amount, Risk per Trade in % or Fixed Contract Size. By default it's set to fixed contract size. Risk Amount (USD or Contracts): This setting is to set how many USD or how many contracts you want to risk per trade. Make sure to check which risk type you have selected before you chose the risk amount. Use Limit Orders If enabled, the strategy will place a pending order x points from the current price, instead of a market order. Limit orders are enabled by default for a better performance. Important: It doesn't actually place a limit order. The strategy will just wait for a pullback and then enter with a market order. It's more like a hidden limit order. Limit Order Distance (points): If you have limit orders enabled, this setting determines how many points from the current price the limit order will be placed. Trading Days: These checkboxes are to select on which week days the strategy has to trade. Thursday is disabled by default because backtests have shown that Thursday is the least profitable day Backtest Settings: For the backtest the commissions ere set to 0.35 USD per mini contract which is the highest amount Tradeovate charges. Margin was not accounted for because typically on Apex accounts you can use way more contracts than you need for the extremely low max drawdown. Margin would be important on personal accounts but even there typically it's not an issue at all especially because this strategy runs on the 15min timeframe so it won't use a lot of contracts anyways. What makes it unique: This script is unique because it's designed to be used on Apex and Top Step accounts with extremely strict drawdown rules. The strategy is optimised to be traded with a fixed contract size instead of using % risk. The reason for that is that the drawdown rules of these Futures Prop Accounts are very strict and the fact that the smallest trade-able contract size is 1. Why the source code is hidden: The source code is hidden because I invested a lot of time and money into developing this strategy and optimising it with paid 3rd party software. Also since I use it myself on my Apex accounts and prop firms don't allow copy trading I don't want it to be used by too many traders.
Pine Script® strategy
by timhutter
9
Bull Flag DetectionThe FuturesGod bull flag indicator aims to identify the occurrence of bull flags. Bull flags are a popular trading pattern that allows users to gauge long entries into a given market. Flags consist of a pole that is followed by either a downward or sideways consolidation period. This script can be used on any market but was intended for futures (NQ, ES) trading on the intraday timeframe. The script does the following: 1. Identifies the occurrence of a flag pole. This is based on a lookback period and percentage threshold decided by the user. 2. Marks the consolidation area after the pole occurrence using swing highs and swing lows. 3. Visually the above is represented by a shaded green area. 4. When a pole is detected, it is marked by a downward off-white triangle. Note that if the percentage threshold is reached several times on the same upward climb, the script will continue to identify points where the threshold for pole detection is met. 5. Also visualized are the 20, 50 and 200 period exponential moving averages. The area between the 20 and 50 EMAs are shaded to provide traders a visual of a possible support area.
Pine Script® indicator
by xfuturesgod
1
RTH Levels Initial Balance Overnight 12-1 Opening types (IB)(ON)Made for ES/NQ. CME_MINI:ES1! CME_MINI:NQ1! But it will most likely work for all USA futures. Default clock settings are set according to CST. This Indicator automatically draws RTH levels, yesterday’s RTH levels, initial balance, overnight and 12-1 (lunch) levels. In additionally, at RTH open, it shows opening type. Also shows/alert works for 12-1 stat. You may need to change the clock range settings for stocks. Definitions of opening types. If price opens the day above the previous day session high, it is considered Higher Outside Range. (HOR) If price opens the day between the previous close and the previous high, it is considered Higher Inside Range. (HIR) If price opens between the previous close and previous low, it is Lower Inside Range. (LIR) If price opens below previous day session low, it is Lower Outside Range. (LOR) Acronyms: RTH : Regular Trading Hours ON : Overnight IBH : Initial Balance High IBL : Initial Balance Low IBMid: Initial Balance Mid ONH : Overnight High ONL : Overnight Low ONMid : Overnight Session Midpoint Price yRthO : Yesterday's rth open yRthH : Yesterday's rth high yRthL : Yesterday's rth low yRthC : Yesterday's rth close yRthMid : Yesterday's rth mid 12-1 : Lunch time for Chicago (12pm to 1pm) (CST) rthmid (for rth session) : (high + low) / 2
Pine Script® indicator
by DocRR
8
ICT Index ScheduleNew ICT student here, decided to compile the daily schedule and salient levels for London and New York index sessions into one place to aid my learning – thought others might benefit from this too :) The script works with whatever timezone setting, however make sure to change your timezone to New York time if you want to have the proper time-price alignment (I personally find it helpful when studying). Here's a legend of all the elements displayed at once: London only: New York only: // Couldn't find a comprehensive script with all the elements included, s/o to @the1dv for their Days of Week script.
Pine Script® indicator
by toodegrees
7
Pre Market \ Opening Range High LowGreen vertical lines are showing pre market open and then the opening range as the first hour of market NYSE market open Pre market high and low are blue lines | intraday opening range high low are in white Trades are taken in the current direction above | below range breaks with the direction of price action using the moving averages Price breaking through moving averages and a range is the optimal trade to enter - exit at next range for target - stop loss below the lower | higher moving average depending on short or long A break above or below the intraday high or low and pre market high or low can give massive profits trailing your stop loss as price runs Using MA 5 and 12 to filter out entries and exits above or below the ranges short or long is also another strategy to implement BEST TIME FRAME TO USE IS 5 MINUTE
Pine Script® indicator
by LucrorStrategies
6
LVOLA MODELAnother variant of the VOLA Model Range. To use this script which focusses on vol on the given equity/commodity/price pair its focussed on at its core methodology. We use NQ1 here as an example on how this indicator can be used. Note the red lines indicate where buy signals occurred an example listed below. Note the best timeframes to use this indicator include (intraday - 1d trades) 7min, 30min, 1hr and Daily for multi day trades. This can be used in conjunction with MVEX VOLA, VOLA & ZVOLA (especially so) when looking to trade $NQ/$ES QQQ / SPY use this in conjunction with the other VOLA models to confirm whether a buy/sell signal. This can also be used on equities since total flows in the bond market can help dictate movement in equities. This is distilled into a simple method where you can use this indicator to gauge a potential buy or sell signal. The red shows a sell signal and a green which is a buy i.e. when the blue line short term signal (blue line) has a major divergence vs the mid and long term then this is typically a sell signal. This is shown in the chart above. The green lines indicate where buy signals occurred with an example listed below. The same goes for the reverse where the short term signal (blue line) is higher then we have a view of a potential buy signal. Once again when the VVS (Short term signal) is flattened out then we have a slowing done in the movement of price action and a reversion has the potential to occur. The greater the divergence and when the line blue line flat lines i.e. stops going up or down and is separate from the green and the red, you then have a view to take a long (if above green and red with a large gap) and a sell (when blue is below green and red with a large gap). Once again there are times where the signal will not work, as with every indicator, model etc nothing hits 100% and I doubt there ever will be such an indicator to exist. As with everything please manage your risk.
Pine Script® indicator
by vexxly
ZVOLA MODELAnother variant of the VOLA Model Range. To use this script which focusses on vol on the given equity/commodity/price pair its focussed on at its core methodology. We use ES1 here as an example on how this indicator can be used. Note the red lines indicate where buy signals occurred an example listed below. Note the best timeframes to use this indicator include (intraday - 1d trades) 30min, 1hr and Daily for multi day trades. This can be used in conjunction with MVEX VOLA & VOLA in particular when looking to trade $NQ/$ES QQQ / SPY as MVEX VOLA/VOLA can confirm whether a buy/sell signal is in line with the VOLA MODELs move. This is distilled into a simple method where you can use this indicator to gauge a potential buy or sell signal. The red shows a sell signal and a green which is a buy i.e. when the blue line short term signal (blue line) has a major divergence vs the mid and long term then this is typically a sell signal. This is shown in the chart above. The green lines indicate where buy signals occurred with an example listed below. The same goes for the reverse where the short term signal (blue line) is higher then we have a view of a potential buy signal. Once again when the VVS (Short term signal) is flattened out then we have a slowing done in the movement of price action and a reversion has the potential to occur. Once again there are times where the signal will not work, as with every indicator, model etc nothing hits 100% and I doubt there ever will be such an indicator to exist. As with everything please manage your risk.
Pine Script® indicator
by vexxly
1
MVEX VOLA MODELTo use this script which focusses on vol on the given equity/commodity/price pair its focussed on at its core methodology. We use ES1 here as an example on how this indicator can be used. This indicator is mainly for ES/NQ and its constituents (except consumer staples, energy etc) which lack the same correlations. Note the red lines indicate where buy signals occurred an example listed below. Note the best timeframes to use this indicator include (intraday - 1d trades) 30min, 1hr and Daily for multi day trades. This is distilled into a simple method where you can use this indicator to gauge a potential buy or sell signal. The red shows a sell signal and a green which is a buy i.e. when the blue line short term signal (blue line) has a major divergence vs the mid and long term then this is typically a sell signal. This is shown in the chart above. The green lines indicate where buy signals occurred with an example listed below. The same goes for the reverse where the short term signal (blue line) is higher then we have a view of a potential buy signal. Once again when the VVS (Short term signal) is flattened out then we have a slowing done in the movement of price action and a reversion has the potential to occur. Once again there are times where the signal will not work, as with every indicator, model etc nothing hits 100% and I doubt there ever will be such an indicator to exist. As with everything please manage your risk.
Pine Script® indicator
by vexxly
4
VWAP Implied Volatility BandsThis script takes the built in VWAP function and creates bands using various Volatility Indexes from the CBOE. The script plots the bands at desired multiples, as well as the closing value of the prior day's first set of bands. Users can choose from the following: VIX(ES), VXN(NQ), RVX(RTY), OVX(CL), GVX(GC), SIV(ZS), CIV(ZC), TYVIX(ZN), EUVIX(EURUSD), BPVIX(GBPUSD) Upon selecting the desired volatility index, users must change the multiplier to fit the underlying product since the indexes are all calculated differently. The goal with this script was to use market generated information (IV) to highlight potential trade locations.
Pine Script® indicator
by CSC1
1
VXN (NQ100 VIX) Implied Move Bands for NQ futures.A spin-off of my similar script for ES futures. This script uses the VXN Index instead of the VIX, which represents the 30-day implied volatility of Nasdaq-100 options and then uses that value to plot bands on the chart, helping traders identify price extremes as identified by the options market. Users can modify the moving average, bands multiplier, and number of lookback days used in the calculation to suit their trading style.
Pine Script® indicator
by CSC1
1
Market StatsThis script escapes much of the subjective technical analysis and discretionary trading in general. With this Script/Indicator, you will be able to have access to the statistics tested day by day in the markets, statistics that will be a decisive support in your trading plan. Its analysis and creation is based on the quantitative trading system, since these statistics have a testing and database behind, which makes it a potential indicator for your trading. You can change the time of the market you want to operate, also the colors of the labels of the statistics, their distance, color of the letters, fully editable to adapt it to the type of market you operate. Its design involves values of the previous session ( RTH ) and extension session (OVERNIGHT), so it will be complemented with markets that are assimilated to that configuration (indices, stocks, futures, CFDs, forex, commodities ) maybe you can adapt it with cryptocurrencies, but being 24/7 you would have to modify its schedule. Important levels included: YHOD: Yesterday High of Day ONH: Onvernight High ONM: Overnight Mid YPOC: Yesterday Point of Control HALFGAP: Close Price Mid GAP: Yesterday Close Price ONL: Overnight Low YLOD: Yesterday Low of Day IBH: Initial Balance High IBL: Initial Balance Low The IBH and IBL levels will appear after 60 minutes into the session, indicating our balance zone. The one that will add more statistics to our trading. _________________________________________________________________________________________________________________________________________________________________________________________________________ Este script, escapa mucho del análisis técnico subjetivo y del trading discrecional en general. Con este Script/Indicador, podrás tener acceso a las estadísticas testeadas día a día en los mercados, estadísticas que serán un apoyo decisivo en tu plan de trading. Su análisis y creación se basa en el sistema de trading cuantitativo, ya que estas estadísticas, tienen un testeo y base de datos por detrás, lo cual lo hace un indicador potencial para tu trading. Podrás modificar el horario del mercado que quieres operar, también los colores de las etiquetas de las estadísticas, su distancia, color de las letras, completamente editable para que lo adaptes al tipo de mercado que operas. Su diseño implica valores de la sesión anterior ( RTH ) y sesión de extensión (OVERNIGHT), por lo que se complementará con los mercados que se asimilen a esa configuración (índices, acciones, futuros, CFDs, forex, commodities ) quizás lo puedas adaptar con criptomonedas, pero al ser 24/7 habría que modificar su programación. Niveles importantes incluidos: YHOD: Yesterday High of Day ONH: Onvernight High ONM: Overnight Mid YPOC: Yesterday Point of Control HALFGAP: Close Price Mid GAP: Yesterday Close Price ONL: Overnight Low YLOD: yesterday Low of Day IBH: Initial Balance High IBL: Initial Balance Low Los niveles de IBH y IBL, aparecerán después de 60 minutos iniciada la sesión, indicando así́, nuestra zona de balance. La que agregará más estadísticas a nuestra operativa.
Pine Script® indicator
by ROVMFUTURES
Scalper's Paradise Tool For NQThis powerful scalping tool was specifically designed for NQ and MNQ. Scalper's Paradise adds buy and sell signals to the chart using a proprietary blend of confluence trading principals that are incredibly accurate. Many of the settings can be customized for uses on higher time-frames and different markets. Along with the buy and sell signals, this indicator offers weakness signaling (seen as dots on the chart), along with potential exit points marked as 'EX' on the chart over a diamond shape. How To Use: This indicator is designed for intra-day scalping. When a buy or sell signal is marked on the chart, it's safe to enter a position. Exit the position when you see weakness in the trend or where the EX (exits) are marked. The Trend Cloud offers great visibility for trend strength and overall volatility and can be used in conjunction with the entries and exits for added confidence that your trade is a worthwhile trade. The red and green backgrounds on the chart are a filtering tool designed to save you from trades that otherwise don't carry enough momentum to be worth entering the market. This part of the indicator has 3 major adjustable settings that allow you to truly dial in your risk. Identify momentum areas and trade with confidence using Scalper's Paradise! Trend Cloud for momentum and confidence Buy and Sell Signals Marked Exits and Trend Weakness dots on the chart ADX Based Clean Trade Filter allows for full customization of your trading risk profile. This part of the indicator will SUPPRESS any and all signals while the chart's background is red. The Safer Trades Filtering in the settings allows further confidence by suppressing riskier trade signals Limitations: This script does not mark reversals. It will only identify safe trade zones during periods of strong momentum. Disclaimer: The information contained in my scripts/indicators/ideas does not constitute financial advice or a solicitation to buy or sell any securities of any type. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, or individual’s trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs. My scripts/indicators/strategies/ideas are only for educational purposes!
Pine Script® indicator
by TerminalChillness
40