Get started

Pivot points and levels

Auto Trend Channels OXEThis indicator automatically detects and draws trend channels based on swing highs and lows. How it works: It identifies pivot points (swing highs/lows) using your chosen lookback period, then connects consecutive pivots to form channels: Descending channels connect lower highs (resistance line), with a parallel support line projected from the lowest low between those highs Ascending channels connect higher lows (support line), with a parallel resistance line projected from the highest high between those lows Key features: Channels extend forward so you can see where price might interact with them Broken channels automatically switch to dashed lines and show "✗" labels Fill shading helps visualize the channel zone Info table shows current pivot counts Trading application: You'd use this for identifying trend direction and potential reversal zones. Price bouncing off channel boundaries = continuation. Price breaking through = potential trend change or acceleration. The "break detection" highlighting makes it easy to spot when a channel has been invalidated. The pivot length setting is your main control - higher values find longer-term, more significant channels; lower values catch shorter-term moves.
Pine Script® indicator
by FXOXE
1
Return IchimoGiu Reversal FXReturn IchimoGiu Reversal FX — Extreme RSI/CCI Reversal System Return IchimoGiu Reversal FX is a precision tool designed to detect high-quality reversal points based on extreme momentum exhaustion followed by controlled re-entry into equilibrium. The system is built around a custom interpretation of the CCI, using: extreme break levels validated return thresholds candle-level confirmation logic optional signal rejection mechanics This creates reversal signals that occur only when a genuine over-extension is followed by a structurally clean return into momentum. 🔍 How It Works 1️⃣ Extreme Break Detection Price must drive the CCI beyond calibrated thresholds: +266 for bullish exhaustion −171 for bearish exhaustion This filters out normal retracements and isolates only high-volatility extensions. 2️⃣ Controlled Return Signal A signal appears when CCI re-enters moderated levels: 222 for sell setups −114 for buy setups The signal is printed directly on the candle that performs this return, ensuring timing precision. 3️⃣ Reset Protection If the CCI breaks the extreme level again before confirmation → signal is cancelled. This eliminates the majority of fake reversals. ⭐ What Makes This Indicator Original Return Reversal FX is not a standard CCI signal. It uses: dual-threshold dynamic structure candle-level validation a proprietary state machine managing break → return → confirmation tailored levels optimized through empirical research This creates a unique reversal system unavailable through classic indicators. 📈 Best Usage Works on indices, forex majors, metals and crypto Recommended timeframe: M15 → H1 Ideal for counter-trend scalping and swing reversals 🔒 Access This is an invite-only script. To request access, please contact me on TradingView or Telegram.
Pine Script® indicator
by GiuGoldTrading
IchimoGiu FX Pro IchimoGiu FX Pro — Advanced Trend & Structure Confirmation System IchimoGiu FX Pro is an invite-only indicator designed to identify high-probability trend continuation setups using a dual-stage logic that combines market structure breaks with a custom Ichimoku-based confirmation engine. Unlike standard Ichimoku or classic breakout indicators, IchimoGiu creates a unique interaction between structure shifts and equilibrium zones, allowing early detection of valid momentum phases while filtering out weak or false breakouts. 🔍 Core Functionalities 1️⃣ Pre-Breakout Detection (Structure Engine) The indicator tracks relevant swing highs and lows and identifies when price approaches a potential BOS (Break of Structure). This creates a Pre-Signal label, allowing traders to anticipate momentum shifts and prepare zones. 2️⃣ Confirmation Signal (IchimoGiu Filter) Once structure is actually broken, the system applies a custom Ichimoku logic: Tenkan/Kijun dynamic alignment Cloud directional bias Price location vs. equilibrium Optional Chikou confirmation layer Reset conditions to avoid false trends Only when all internal conditions align is a confirmed BUY or SELL signal generated. This makes IchimoGiu a precision tool for continuation trades, not a simple trend-following mashup. ⭐ What Makes IchimoGiu Original IchimoGiu is not a merge of existing indicators. It uses: a proprietary pivot engine designed specifically for BOS/CHOCH, re-engineered Ichimoku components optimized for confirmation speed, an original pre-signal → confirmation structure logic, unique reset and filtering conditions. These concepts cannot be reproduced through classic Ichimoku or standard TradingView indicators. 📈 Best Practices Recommended markets: XAUUSD, Nasdaq, US30, GBPUSD, EURUSD Recommended timeframes: M15 → H1 Use the Pre-Signal to define interest zones Enter only on confirmed labels for maximum reliability 🔒 Access This is an invite-only script. To request access, please send me a private TradingView message or contact me on Telegram.
Pine Script® indicator
by GiuGoldTrading
Pivot automatic by GaryIn recent years, I have been exposed to concepts such as order block and fair value gap, which have gained significant popularity. However, I believe that traditional support and resistance levels based on swing highs and lows still hold certain practical value. In particular, support and resistance on higher timeframes play a crucial role in our technical analysis. The traditional principle of support-resistance flip remains valid, and higher timeframe support/resistance levels provide a more systematic framework for analysis. In contrast, the definitions of order block and fair value gap are overly vague; they are often decoupled from market trends, generate numerous false signals, and are thus difficult to apply effectively in practice. ## Pivot Automatic V4 Indicator An intelligent support and resistance zone identification tool with the following core features: **🎯 Auto Timeframe Detection** - Automatically selects appropriate higher timeframes based on current chart period - No manual adjustment needed, adapts to different trading styles **📊 Key Features** - **Support/Resistance Zones**: Auto-identifies and draws HTF pivot high/low zones - **Touch Alerts**: Real-time alerts for first touch, re-touch, and breakout of zones - **High Volume Detection**: Marks price areas with exceptional volume - **Session Filtering**: Configurable trading session analysis **💡 Practical Features** - Customizable zone colors and transparency - Multiple alert types (touch/breakout/retest) - Detailed price information tooltips - Auto-extends active zones, cleans broken zones Perfect for traders to identify key price levels and improve entry/exit timing accuracy across all timeframes.
Pine Script® indicator
by gary186
CapitalFlowsResearch: CB LevelsCapitalFlowsResearch: CB Levels — Policy Path Mapping for STIR & Rates Traders CapitalFlowsResearch: CB Levels provides a structured, policy-anchored framework for interpreting short-term interest rate futures. Instead of treating STIR pricing as an abstract number, the indicator converts central bank settings—such as the official cash rate, expected hike/cut increments, and basis adjustments—into a clear ladder of explicit rate levels. These levels are then projected directly onto the price chart as horizontal reference bands. The tool automatically builds a series of future policy steps (e.g., +25bp, +50bp, –25bp, etc.) based on user-defined increments and direction, allowing traders to visualise where the current contract sits relative to hypothetical central bank actions. By plotting settlement levels and multiple forward steps, the script creates a transparent “policy grid” that traders can anchor against when evaluating mispricings, risk/reward asymmetry, or scenario outcomes. Discreet labels—placed periodically to avoid clutter—identify each policy step in bp terms, making the chart readable even when zoomed out. Whether the mode is set to Cuts or Hikes, the tool instantly recalibrates the entire ladder, offering a consistent structure for comparing different contracts or central bank paths. In practice, CB Levels acts as a policy-path overlay for futures traders, helping them contextualise market pricing relative to central bank intent, quantify potential repricing ranges, and understand where key inflection levels lie—without revealing the underlying calculation methods that generate the steps.
Pine Script® indicator
by Capital_Flows_Dev
Jerry's TrueDay Opening Ranges (BEST)Shows the UTC Open for Sessions of (Yearly Monthly Weekly) candles, and their corresponding first 12 Hours of price trading as a broader zone/level. Can toggle amount of previous sessions shown (up to 10), their highs and lows of the session, all sessions with shorthand labels, and level's labels when in a customizable % distance from each other to (hopefully) overlap. Can bring the last immediate session of whatever section up to where price, time, and session is displayed currently, (may have to adjust y axis to see it, if you do, probably not relevant.) On the Daily section, marks every new day, the attempted direction in the first hour of price. Noting the Attempted Direction (first hour of daily {or arbitrarily decided H12} of Y/M/W), paired with volume, and watching for follow through or not, or how the market reacts off of the level, is a very under utilized level and repeatable time based method I credit in inspiration to Jim Dalton, his books and his DVD seminar "Fields of Vision", as well as honestly and primarily, Will Hunting on twitter (@ wmd4x;) enjoy and God bless. (I keep reposted bug fixed and constantly perfected versions, most recent is best)
Pine Script® indicator
by jared-dell
DCA Ladder CalculatorThis script is a DCA (Dollar-Cost Averaging) Ladder Calculator with Risk & Leverage Management baked in. It’s designed for both LONG and SHORT positions, and helps you: 🎯 Strategically scale into positions across multiple entry points 🔐 Control risk exposure via defined capital allocation ⚖️ Utilize leverage responsibly — for efficiency, not destruction 🧮 Visualize risk, stop loss level, and entry distribution 🔁 Adapt to trend reversals or key zones, especially when combined with reversal indicators or higher timeframe signals 🧠 How It Works This tool takes a capital allocation approach to building a ladder of positions: 1. You define: - Portfolio value - Risk per trade (as %) - Leverage - Number of DCA levels - Entry multiplier (e.g. 1x, 2x, 4x...) 2. The script then: - Calculates total margin to risk = Portfolio × Risk % - Calculates total leveraged position size = Margin × Leverage - Distributes entries according to exponential weights (1x, 2x, 4x...), totaling 7 for 3 levels - Calculates per-entry: - Entry price (based on price zone spacing) - Multiplier - Exact margin per entry - Leverage per entry (margin × leverage) - Computes: - Average entry price (margin-weighted) - Approximate stop loss level based on recent ATR and price structure - % drawdown to SL - Total margin and position size 3. Displays all this in a clean on-chart table. 📈 How to Use It 1. Apply the indicator to a chart (default: 1D — ideal for clean zones). 2. Configure your: - Portfolio Value (total trading capital) - Risk per Trade (%) (your acceptable loss) - Leverage (exchange or strategy-based) - DCA Levels (e.g. 3 = anchor + 2 entries) - Multiplier (typically 2.0 for doubling) 3. Choose LONG or SHORT mode depending on direction. 4. The table will show: - Entry price ladder - Margin used per entry - Total position size - Approx. stop loss (where your full risk is defined) Use in conjunction with price action, S/R zones, trendline breaks, volume divergence, or reversal indicators. ✅ Best Practices for Using This Tool - Leverage is a tool, not a weapon. Use it to scale smartly — not recklessly. - Use fewer, higher-conviction entries. Don’t blindly ladder; combine with price structure and signals. - Stick to your risk percent. Never risk more than you can afford to lose. Let this calculator enforce discipline. - Combine with other confirmation tools, like RSI divergence, momentum shifts, OB zones, etc. - Avoid martingale-style over-exposure. This is not a gambling tool — it’s for capital efficiency. 🛡️ What This Tool Does NOT Do - This is not a trade signal indicator. - It does not place trades or auto-manage positions. - It does not replace personal responsibility or strategy — it's a tool to help apply structure. ⚠️ Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice, nor is it a recommendation to buy or sell any financial instrument. Always consult a licensed financial advisor before making investment decisions. Use of leverage involves high risk and can lead to substantial losses. The author and publisher assume no liability for any trading losses resulting from use of this script.
Pine Script® indicator
by RWCS_LTD
1
Daily Range Zones: PDH/PDL with SL/TPThis indicator automatically plots the previous day's High and Low levels and projects dynamic Stop Loss (SL) and Take Profit (TP) zones based on the daily range percentage. It is designed for traders focusing on daily range breakouts or mean reversion strategies around the Previous Day High (PDH) and Previous Day Low (PDL). Key Features: Level 0 & 1: Visualizes the exact High and Low of the reference timeframe (Daily). Inner Zone (Orange): Calculated inside the range. Acts as a buffer for Stop Loss placement or entry zones for mean reversion. Outer Zone (Purple): Calculated outside the range (extension). Acts as a primary Take Profit target for breakout trades. Settings: Fully customizable percentages for inner and outer zones. Option to toggle between current day or previous day data. Works on any timeframe (intraday charts recommended).
Pine Script® indicator
by stoyan_valev
Alt Trading: Tom's Reversal Strategy The Alt Trading: Tom’s Reversal Strategy indicator is a multi-layered market-structure and regime-detection tool engineered specifically for intraday futures trading. It dynamically computes hourly directional bias using higher-timeframe OHLC data, enabling traders to visually interpret bullish or bearish regime transitions with precision. The system identifies structural turning points through pivot-based swing analysis and confirms Break-of-Structure (BOS) events with strict or non-strict validation logic. Once a valid BOS occurs inside a higher-timeframe continuation window, the indicator generates long or short signals that incorporate intelligent risk modeling, including pivot-derived stop placement and customizable fixed-risk calibration. Automated risk-to-reward boxes are drawn in real time, updating tick-by-tick until either the stop or target is hit, allowing for clear visualization of trade lifecycle and expectancy. A second-order trend-continuation filter highlights specific intra-hour windows—referred to as “blue windows”—giving traders refined timing insights for potential reversals. With optional background bias shading, customizable TP/SL lines, and fully stylized BOS labels, the interface provides a clean, highly interpretable execution framework. Designed with scalpers and algorithmic traders in mind, the indicator blends structure, regime context, and real-time visualization to produce high-probability reversal setups during the most liquid hours of the trading session.
Pine Script® indicator
by futuresone
Direction via Zone Break [by rukich]🟠 OVERVIEW The indicator shows the direction of movement and zones: SSL, BSL, FVG. Zones serve as support/resistance and as validation/invalidation of a movement reversal. 🟠 COMPONENTS The direction of movement is built based on a three-candle swing high (BSL) and swing low (SSL) pattern. If swing high (BSL) and swing low (SSL) are formed, and then an internal swing high/low is formed (depending on the direction of movement), then in case the initial movement continues — for example, in an upward movement — the new swing low (SSL) will be the minimum before the update, i.e., the internal low, while the swing high (BSL) will be formed according to the three-candle pattern. A change of direction is considered when a candle closes beyond the key swing high/low (BSL/SSL), depending on the direction of movement. For example, in an upward movement, a break occurs when a candle closes beyond the swing low (SSL). After that, the swing high (BSL) will be the nearest fractal (swing high), and the swing low (SSL) will be formed according to the three-candle pattern. All the above logic also applies to downward movements. Within each movement, there can be FVG zones, which can act as support/resistance or indicate weakness in the movement direction. Note: if the movement is upward, only bullish FVG+ will be displayed; if the movement is downward, only bearish FVG- will be displayed. Weakness of movement direction. For example, consider an upward impulse with the nearest FVG+ zone. If the price closes beyond the lower boundary of the zone, it will be considered invalidated (inv. FVG-), which in turn indicates weakness in the movement direction and a possible local short, which may subsequently lead to a break of the entire movement. 🟠 HOW TO USE There are only two visual settings in the configuration: Show previous SSL/BSL – enables/disables the display of all previous SSL/BSL zones Show Bullish/Bearish trend – enables/disables background shading between SSL and BSL for visual understanding of the movement direction On the chart, the following are displayed: Labels with current SSL/BSL FVG+- / inv. FVG+- zones, for trading in the movement direction In case the nearest FVG is invalidated, a label will appear with the text: Weak bullish/bearish & local short/long (this is not a signal, but only indicates the probability of a potential move based on the weakness of the nearest zone) 🟠 CONCLUSION The indicator helps determine the current movement with zones for trading in the direction, and also indicates movement weakness through invalidation of the nearest zones.
Pine Script® indicator
by rukich
11
(QUANTLABS) Fractal God Mode: 25-Timeframe Scanner The indicator aggregates data into three distinct metric columns: 1. STRUCT (Market Structure) This analyzes price action relative to Fractal Pivots (Highs and Lows) to determine market direction. HH (Breakout): Price has closed above the previous Pivot High. (Bullish Structure) LL (Breakdown): Price has closed below the previous Pivot Low. (Bearish Structure) TRAPPED: Price is trading between the last Pivot High and Low. This indicates a ranging market where trend trades should be avoided. 2. VELOCITY (Thrust) This measures the specific strength of the current candle on that timeframe. The Math: It calculates the ratio of the body (Close - Open) relative to the total candle range (High - Low). The Signal: High positive numbers (Green) indicate buyers are closing near highs. High negative numbers (Red) indicate sellers are dominating the range. 3. QUALITY (Efficiency Ratio) This acts as a "Noise Filter." It determines if the trend is moving in a straight line or whipping back and forth. The Math: It divides the Net Price Movement (Distance from 5 bars ago) by the Total Path Traveled (Sum of the ranges of the last 5 bars). PRISTINE (Values > 0.6): The market is moving efficiently in one direction. CHOPPY (Values < 0.4): The market is volatile and non-directional (High Noise). 1. The Matrix (Dashboard) Located in the bottom right, this table gives you an instant read on Short-Term (3m-9m), Medium-Term (10m-45m), and Long-Term (1H-Daily) trends. 2. Coherence Flow At the bottom of the table, the script sums up the structural score of all 25 timeframes. COHERENT BULL: When the Short, Medium, and Long terms align green. COHERENT BEAR: When the Short, Medium, and Long terms align red. 3. God Mode (Global S/R) The indicator can plot Support and Resistance levels from higher timeframes onto your current chart. For example, while trading the 5m chart, you can see the 4H and Daily pivot levels plotted automatically as dotted lines, ensuring you never trade blindly into a higher-timeframe wall. Trend Following: Wait for the "Coherent Bull/Bear" signal at the bottom of the dashboard. This confirms that momentum is aligned from the 3m chart up to the Daily. Scalping: Focus on the Quality column. Only take trades when the Quality is "CLEAN" or "PRISTINE." Avoid entries when the dashboard warns of "High Noise" (Choppy). Risk Management: If the dashboard shows "TRAPPED" on the Long Term (1H+), reduce position size or wait for a breakout. Pivot Lookback: Adjusts the sensitivity of the Fractal Structure (Default: 5). Show Fractal DNA Matrix: Toggles the dashboard table. Show ALL Timeframe S/R: Enables "God Mode" to see supports/resistances from all 25 timeframes (Heavy visual processing, use carefully).
Pine Script® indicator
by CustomQuantLabs
Pivot Hourly x EMA RibbonHourly Fibonacci Pivot + EMA is an intraday analysis tool that combines hourly Fibonacci-based pivot levels with exponential moving averages (EMAs). It is designed to help traders visualize potential intraday support/resistance zones and short-term trend direction on any timeframe. The indicator calculates pivot levels from hourly price data and then projects Fibonacci extensions and retracements around a central pivot. These levels can be used to see where price has previously reacted and where future reactions may occur. The EMAs provide an additional layer of context by highlighting the prevailing short-term trend and momentum. Key features: Hourly Fibonacci pivot levels (support and resistance zones derived from hourly ranges) Multiple Fibonacci bands to show potential reaction areas above and below the central pivot One or more configurable EMAs to show short-term trend direction and dynamic support/resistance Works on all symbols and intraday timeframes supported by TradingView Typical use: Monitor how price behaves when approaching or rejecting Fibonacci pivot levels Look for confluence between pivot zones and EMA direction or EMA bounces Use the levels as potential areas of interest for trade planning, stop placement, or partial profit zones within your own trading system Also have "C" Label it's mean Candle for example C1 is First Candle of the source timeframe, if the source timeframe set to 4 Hour it will be the first 4h candle, the C2 is the second 4h candle of the day. This script is intended purely as a technical analysis tool and does not generate buy/sell signals or guarantee any particular outcome. It is not financial advice. Always combine it with your own analysis, risk management, and trading plan before making any trading decisions.
Pine Script® indicator
by AtomicPips
Square of Nine Levels [RC] Basic📐 Square of Nine Levels Basic— Precision Market Geometry for Dynamic Price Targets The Square of Nine Levels Basic indicator is a powerful price-projection and level-mapping tool based on W.D. Gann’s legendary Square of Nine mathematical system. This indicator transforms market prices into geometric rotations and harmonic levels—revealing price zones where markets historically accelerate, pause, or reverse with uncanny accuracy. Unlike static Fibonacci tools, Square of Nine levels expand radially around a chosen base price, creating concentric price cycles that align with vibrational mathematics and cyclical market resonance. When price interacts with these rotational degrees, traders often witness structural reactions that are invisible to standard indicators. 🧭 What This Indicator Does Once a trader inputs (or clicks) a Base Price, the indicator automatically: ✔️ Computes Square of Nine projections in upward and downward directions ✔️ Plots concentric price circles (levels of expansion) (Basic Version 1 Level Only) ✔️ Highlights rotational harmonics and midpoint attractors ✔️ Shows Golden Ratio (0.786 / 0.618 / 0.382 / 0.236) cyclic divisions ✔️ Provides clear visual level markers & labels for analysis ✔️ Adjusts dynamically as price trends evolve These levels act as mathematical magnets, where price frequently: Finds hidden support or resistance Creates fair value rejection zones Forms breakout thresholds Completes wave and time cycles Resonates with prior swing pivots 🔍 Key Features Feature Benefit _________________________________________________________________________ Auto Square-of-Nine Level Calculation Zero manual computation—instant geometry Adjustable Circles & Points Model Gann expansions as per your theory Golden Ratio & Midpoint Zones Adds confluence for precision entries Multi-color Cycle Layers Instantly differentiate price cycles Minimal UI Designed for professional clean charts 🧠 Why the Square of Nine Matters Gann believed that price does not move randomly—it rotates through degrees, harmonics, and vibrational frequencies. The Square of Nine captures this rotation mathematically: Price in time equals price in space. This tool reveals those rotational levels, allowing traders to anticipate when price is likely to pivot or continue—with mathematically predictable targets. 🎯 Best Use-Cases Identifying major support/resistance levels Timing cycle inflection points Swing, positional, and index-level forecasting If you trade using Gann methods, cycles, harmonics, Square of 9, or astro-geometry, this indicator becomes a foundational levels and projection engine. 🚀 Take Your Charting to the Next Dimension The Square of Nine Levels Basic is not just a level plotter—it is a market resonance system. Once you understand how price vibrates around these circles, you gain a structural edge that most traders never discover.
Pine Script® indicator
by raikarcapital
Position Size Calculator + Live R/R Panel — SMC/ICT (@PueblaATH)Position Size + Live R/R Panel — SMC/ICT (@PueblaATH) Position Size + Live R/R Panel — SMC/ICT (@PueblaATH) is a professional-grade risk management and execution module built for Smart Money Concepts (SMC) and ICT Traders who require accurate, repeatable, institution-style trade planning. This tool delivers precise position sizing, R:R modeling, leverage and margin projections, fee-adjusted PnL outcomes, and real-time execution metrics—all directly on the chart. Optimized for crypto, forex, and futures, it provides scalpers, day traders, and swing traders with the clarity needed to execute high-quality trades with confidence and consistency. What the Indicator Does Institutional Position Sizing Engine Calculates position size based on account balance, % risk, and SL distance. Supports custom minimum lot size rounding across crypto, FX, indices, and derivatives. Intelligent direction logic (Auto / Long / Short) based on SMC/ICT structure. Advanced Risk/Reward & Profit Modeling Real-time R:R ratio using actual rounded position size. Live PnL readout that updates with price movements. Gross & net profit projections with full fee deduction. Execution Planning with Draggable Levels Entry, SL, and TP levels fully draggable for fast scenario modeling. Automatic projected lines backward/forward with clean label alignment. TP and SL tags include % movement from Entry, ideal for SMC/ICT journaling. Precise modeling of real exchange fee structures Maker fee per side Taker fee per side Mixed fee modes (Maker entry, Taker exit, Average, etc.) Leverage & Margin Forecasting Margin requirements displayed for 3 customizable leverage settings. Helps traders understand capital commitment before executing the trade. Useful for futures, crypto perps, and CFD setups. Clean HUD Panel for Rapid Decision-Making A full professional trading panel displays: Target & actual risk Position size Entry / SL / TP TP/SL percentage distance Gross profit Net profit (after fees) Fees @ TP and @ SL Live PnL Margin requirements Optimized for SMC & ICT Workflows Perfect for traders using: Breakers, FVGs, OBs Liquidity sweeps Session models Precision entries (OTE, Displacement, Rebalancing) Leverage-based execution (crypto perps, futures) How to Use It Attach the indicator to your chart. Set account balance, risk %, fee model, and leverage presets. Drag Entry, SL, and TP to shape the setup. View instant calculations of: Position size; R:R; Net PnL after fees; Margin required Use it as your pre-trade checklist & execution model. Originality & Credits This script is an original creation by @PueblaATH, released under the MPL 2.0 license. It does not copy, modify, or repackage any existing TradingView code. All logic—including the fee engine, margin calculator, responsive HUD, dynamic risk model, and visual execution system—is authored specifically for this indicator.
Pine Script® indicator
by PueblaATH
BTC Runner V1Bitcoin Runner V1 — advanced proprietary visual tool created specifically for long-term Bitcoin cycle research on 1D, 1W and 1M timeframes. The indicator operates in two fundamentally different visual modes: Buffett Mode (4-Year Halving Cycle Logic) Fully built on Bitcoin’s historical ~4-year halving cycle. Using an original mathematical formula and real-time price data, the indicator continuously tracks whether the current cycle has reached the structural point that historically marked the final phase of previous bull markets. As soon as ALL formula conditions are met for the first time: - Chart background instantly changes color (green → red at cycle top, red → green at cycle bottom reversal) - A large permanent non-repainting banner appears showing the exact date and price of the All-Time High (ATH) of the current cycle - Fixed label “ATH” with price and timestamp is plotted and remains on the chart forever Examples on charts: - Chart #1 (20 Jan 2018) — green background still active, bull phase ongoing - Chart #2 (22 Jan 2018) — exact moment all conditions triggered: background turns red + permanent ATH banner with unchangeable data appears The same logic works in reverse when a bear cycle ends and a new bull cycle begins. Cramer Mode (Historical Correction & Drawdown Zones Logic) Based on over 10 years of personal observation of recurring percentage zones across multiple Bitcoin cycles: • Major corrections historically reaching up to ~84% from local highs • Intermediate drawdowns typically 20–55% When ALL conditions of the multi-stage proprietary formula are satisfied for the first time after a prolonged decline or consolidation, the indicator automatically draws in real time: 1. Large green background banner with bold white text “AP” (Analyzed Point) — marking the price level where, according to many years of observation across several cycles, such deep corrections have historically completed. 2. Dynamic floating label “TP” (Tracked Progress) — a temporary price marker that moves with the current price in real time. As soon as price touches or exceeds this level, the entire banner instantly and permanently turns blue and the text changes to “AP Completed”. All banners, colors, and labels appear strictly automatically in live mode and never repaint. Important: - The script contains over 500 lines of completely original closed-source code. - No standard indicators are used (moving averages, Fibonacci, waves, volume, volume profile, etc.). Only pure original mathematical modeling. - The indicator is intended exclusively for research, educational, and informational purposes. - It contains no trading recommendations, investment advice, or calls to action of any kind. Respectful note to TradingView moderators and users: If any visual elements or logic seem similar to previously published open-source scripts — feel free to use those open-source versions instead. Bitcoin Runner V1 is a 100% original closed-source tool based on the author’s personal multi-year research and observations.
Pine Script® indicator
by ByteMEME