Get started

Search in scripts for "stoch"

Stochastic RSI BandsStochastic RSI Bands by // © drbarry92064859 It is suggested to view this indicator on 15m or 5m timeframe with current Default Settings. This indicator is based on the StochRsi. It creates color bands based on the direction of multiple timeframe StochRsi. When the MTF StochRsi's are opposed in direction it produces darker bands and when aligned in direction it produces light bands. During Green Bands, price tends to be Bullish. During Red Bands, price tends to be Bearish. During Medium toned Bands, price action tends to be in a correction in existing HTF trend, ranging, or getting ready for reversal. During Light Bands, price tends to be in Trend in direction of color. There is usually Dark Bands on either side of a light or medium toned band. Best to enter in direction of current color, during the dark band after the medium toned bands And exit in the dark band after the light toned band. Brown bands tend to indicate reversal of direction and color. I have experimented with all the timeframes and StochRSI settings and found the best settings to be as follows. The Default settings are Middle Time Frame: 4H and Higher TimeFrame: D1. The Default StochRSI settings are 34 RSI, 21 Stochastic, 13 smooth K and 13 smooth D. It is suggested to use a lower timeframe such as 15m or 5m for entry. You can experiment with different StochRSI and TimeFrame Settings. SUGGESTED STRATEGY Dark Bands after medium toned bands: Look for an entry on lower timeframe (15m or 5m) based on reversal candlestick formations or other indicators in direction of current color. Light Bands: Do not enter during lighter bands. You should already be in trade during Light Bands Light Band changes to Dark Band: Exit Trade if already in. Look for general change of directional bias if a brown band occurs; however wait for dark band after the 2nd wide band following the brown band.
Pine Script® indicator
by KaizenTraderB
5
+ Stochastic S/R ZonesHey, all. I have a new indicator here that displays zones on your price chart where the stochastic oscillator has moved out of overbought or oversold back into the range of the indicator that is bounded by those two levels. I know there are many support and resistance indicators on TradingView already, at least a couple of which use the RSI in a similar way as I am using the stochastic here, but I still believe this is a fairly novel interpretation of the stochastic, and it is, in my opinion, a better oscillator than the RSI to be used in this way. In addition to the zones being plotted on the chart, the indicator also, optionally, can color candles or plot shapes above candles when the 50 line is crossed, so if you want to use this as a simple momentum indicator without desire of having the below chart indicator taking up screen space, you're pretty much covered on the typical signals you might want from it (with the exception of %K / %D crosses, but there are alerts for that). Visually, it is a simple, clean indicator. There are the zones, and then candle colors or shapes if you opt to add those. These zones are actually drawn from the candle preceding the cross over or cross under. Reason for that is often times the candle of the cross is fairly impulsive and exiting a consolidation. That period of consolidation is what is important to highlight, at least as far as I am concerned. The zones themselves extend until they are broken by a candle. A support zone stops at the candle that closes below its low. Vice versa for a resistance zone. Usage is fairly simple. All the standard stochastic inputs are available for you to adjust to your heart's content. Additionally, you can choose either the %K or %D line to use as the source from which the zones are drawn, candles are colored, and shapes are plotted. Not sure if this will matter to most people, but I figured it should be made available. This should be obvious, but I feel it must be said, just because an oscillator (any oscillator) has exited overbought or oversold does not mean that there must be a reversal (or in the case of a trend pullback, continuation). The oscillator can always simply immediately move back into overbought/sold. Just because a support box prints does not mean you should mortgage your house on a long trade. In strong trends, and depending on your oscillator settings, the indicator might draw a box then only a couple of candles later break it, continuing on with the trend. This of course is telling you something, and you would be wise to listen. As with all things trading, context is important. Here are a few extra screens for you. I really hope you all like this. It's been ages since I've created anything new, and despite its simplicity and the few lines of code that make it up, it took a lot of work, as I am a poor coder. Enjoy, Scott
Pine Script® indicator
by ClassicScott
7
Stoch PRO + Dynamic EMA (EMA cross)Stoch PRO + Dynamic EMA Documentation Overview: - Pine Script v6 overlay indicator combining a trend-colored EMA with a Stochastic oscillator to highlight midline momentum shifts. - Designed for TradingView charts (Indicators → Import) as a visual aid for timing entries within trend-following setups. - Crafted and optimized around BTCUSDT on the 4h timeframe; adapt inputs before applying to other markets or intervals. Inputs: - EMA Length (default 50): smoothing window for the dynamic EMA; lower values respond faster but whipsaw more. - Stochastic K Length (20): lookback for the raw %K calculation. - Stochastic K Smoothing (3): SMA applied to %K to reduce noise. - Stochastic D Smoothing (3): SMA over %K to produce the companion %D line. Visual Elements: - EMA plotted on price with linewidth 3; teal when close > EMA, fuchsia otherwise. - Background tinted teal/fuchsia at high transparency (≈92) to reinforce the current trend bias without obscuring price bars. Oscillator Logic: - %K = ta.stoch(high, low, close, kLength); smoothed with ta.sma(kRaw, kSmooth). - %D = ta.sma(k, dSmooth). - Focus is on the midline (50) rather than traditional 20/80 extremes to emphasize rapid momentum flips. Signals: - Buy: %K crossing above 50 while close > EMA (teal state). Plots tiny teal circle below the bar. - Sell: %K crossing below 50 while close < EMA (fuchsia state). Plots tiny purple circle above the bar. Trading Workflow Tips: - Use EMA/background color for directional bias, then confirm with %K 50-cross to refine entries. - Consider higher-timeframe trend filters or price-action confirmation to avoid range chop. - Stops often sit just beyond the EMA; adjust thresholds (e.g., 55/45) if too many false positives occur. - Always plan risk/reward upfront—define TP/SL levels that fit your strategy and backtest them thoroughly before trading live. Alerts & Extensions: - Wrap crossUp/crossDown in alertcondition() if TradingView alerts are needed. - For automation/backtesting, convert logic to a strategy() script or add position management rules.
Pine Script® indicator
by DrewRS
Stochastic RSI ScreenerStochastic RSI Screener is built as an indicator and can be applied to any chart. It gives users the ability to choose 5 specific symbols to watch and then specify the required options to change the RSI and Stochastic settings in a way that fits their needs. This screener shows the values of (CURRENT PRICE, RSI, K-VALUE, D-VALUE) for each one of the specified symbols. It will do the calculations based on the currently opened timeframe for all symbols.
Pine Script® indicator
by Forex_Associate
12
Stochastic Slow and OBV Percent Oscillator Purpose - Stochastic is the best momentum indicator and On Balance Volume (OBV) is the best volume indicator. Why not combine both to come up with a more sophisticated oscillator? How It's Done - I had to put OBV as an oscillator (returning values between 0 and 100) in order to put it in the same pane with the slow stochastic oscillator. Otherwise, their synergy won't be that great. So, I have decided to visualize OBV as a percentage relative to selected period's high and low value. That way, I can keep the OBV value to stay within boundary. Interpretation 1. Dot color indicates the whether the stochastic K/OBV is over or below the stochastic D/Signal line. 2. When Stoch and OBV are moving in the same direction and are close together (on top of each other), this indicates a strong trend 3. When Stoch crosses up or down the OBV oscillator, it may indicate a trend reversal
Pine Script® indicator
by Bhangerang
1
Stoch+RSI (SLOW D)_By Josef_HakkakStoch+RSI (SLOW D)_By Josef_Hakkak Stochastic and RSI by SLOW D% -> How to use: B UY = When the yellow line (D of Slow Stoch ) goes out of the green range, it is better that the purple line ( RSI ) is be low SELL = When the yellow line (D of Slow Stoch ) goes out of the red range, it is better to have the purple line ( RSI ) is be high This script was previously written by RRanjanFX and has now been edited by me and changes have been made to optimize for shorter timeframes. Edited and updated and optimized from: RRanjanFX Many thanks and loyal to RRanjanFX
Pine Script® indicator
by Josef_Hakkak
1
Stochastic CandlesA series of up to 28 stochastics oscillators used to form an average stochastic value, which is then used to colour the candles based on the momentum. Each candle can be coloured one of ten colours and each one represents a position on the stochastic oscillator. The indicator helps traders to visualise the momentum and helps trend following. Inputs: MA: multiple smoothing methods Theme: multiple colours Increment: stochastic length start and increments End: stochastic length end Smooth: smooth stochastic
Pine Script® indicator
by Violent
27
Stochastic Buy Sell with EMA TrendStochastic Buy Sell with EMA Trend is combination of two indicators only. The Stochastic Oscillator ( STOCH ) is a range bound momentum oscillator. The Stochastic indicator is designed to display the location of the close compared to the high/low range over a user defined number of periods. Typically, the Stochastic Oscillator is used for three things; Identifying overbought and oversold levels, spotting divergences and also identifying bull and bear set ups or signals. The Exponential Moving Average (EMA) is a specific type of moving average that points towards the importance of the most recent data and information from the market. 1) Stochastic - It is giving signal whenever cross happen in oversold or overbought zone. 2) EMA 200 - EMA 200 is used to identify market trend. Long : If stochastic giving buy signal and price is over 200 EMA. Short : If stochastic giving sell signal and price is below 200 EMA.
Pine Script® indicator
by RealTradingIndicator
8
Stochastic Moving AverageHi all, This Strategy script combines the power of EMAs along with the Stochastic Oscillator in a trend following / continuation manner, along with some cool functionalities. I designed this script especially for trading altcoins, but it works just as good on Bitcoin itself and on some Forex pairs. ______ SIGNALS ______ The script has 4 mandatory conditions to unlock a trading signal. Find these conditions for a long trade below (works the exact other way round for shorts) - Fast EMA must be higher than Slow EMA - Stochastic K% line must be in oversold territory - Stochastic K% line must cross over Stochastic D% line - Price as to close between slow EMA and fast EMA Once all the conditions are true, a trade will start at the opening of the next ______ SETTINGS ______ - Trade Setup: Here you can choose to trade only longs or shorts and change your Risk:Reward. You can also decide to adjust your volume per position according to your risk tolerance. With “% of Equity” your stop loss will always be equal to a fixed percentage of your initial capital (will “compound” overtime) and with “$ Amount” your stop loss will always be 'x' amount of the base currency (ex: USD, will not compound) Stop Loss: The ATR is used to create a stop loss that matches current volatility. The multiplier corresponds to how many times the ATR stop losses and take profits will be away from closing price. - Stochastic: Here you can find the usual K% & D% length and overbought (OB) and oversold (OS) levels. The “Stochastic OB/OS lookback” increase the tolerance towards OB/OS territories. It allows to look 'x' bars back for a value of the Stochastic K line to be overbought or oversold when detecting an entry signal. The “All must be OB/OS” refers to the previous “Stochastic OB/OS lookback” parameter. If this option is ticked, instead of needing only 1 OB/OS value within the lookback period to get a valid signal, now, all bars looked back must be OB/OS. The color gradient drawn between the fast and slow EMAs is a representation of the Stochastic K% line position. With default setting colors, when fast EMA > slow EMA, gradient will become solid blue when Stochastic is oversold and when slow EMA > fast EMA, gradient will become solid blue when Stochastic is overbought - EMAs: Just pick your favorite ones - Reference Market: An additional filter to be certain to stay aligned with the current a market index trend (in our case: Bitcoin). If selected reference market (and timeframe) is trading above selected EMA, this strategy will only take long trades (vice-versa for shorts) Because, let’s face it… even if this filter isn’t bulletproof, you know for sure that when Bitcoin tanks, there won’t be many Alts going north simultaneously. Once again, this is a trend following strategy. A few tips for increased performance: fast EMA and D% Line can be real fast… 😉 As always, my scripts evolve greatly with your ideas and suggestions, keep them coming! I will gladly incorporate more functionalities as I go. All my script are tradable when published but remain work in progress, looking for further improvements. Hope you like it!
Pine Script® strategy
by LucasVivien
16
Stochastic Structure AnalyzerA momentum indicator that uses the highest and lowest values for price in three different lookback lengths to find the performance relative to three timeframes. - Stochastic can be used for buy and sell signals as usual. - The bars at the back represent the stochastic value of the OBV based structure calculation. - The color of the stochastic line is a preliminary indicator of an up move. - The fill color between the stochastic lines indicate the trend strength, How to use: I suggest combining this with a higher timeframe to buy when the both stochastics are crossing below 20 line. And sell when one of the stochastics crosses-down. This is the stochastic version of the structure analyzer().
Pine Script® indicator
by ekrem6nel
Stochastic EMA, SMA, VWMA + DivergenceEvery MetaTrader User knows the function to switch the stochastic calculation from simple to exponential. So i took the original Stochastic code from TV and enhanced it for the SMA, EMA, and VWMA smoothing. If you are using a longer K Smoothing interval you will recognize a notable difference between SMA and EMA. Standard Stochastic Calculation that is well kown Option to switch smoothing calculation Choice between Simple Moving Average, Exponential Moving Average, Volume Weighted Moving Average If you have more wishes regarding the smoothing, just leave a comment i can add a lot more... On my to-do list is also the divergence lines known from the "divergence indicator" (RSI). I hope this helps to get better entries ;-) Have fun!
Pine Script® indicator
by Roul_Charts
2
Stochastic with Lines - ChartWhat is Stochastic with Lines - Chart and why do you need it? I use it for chart analysis to identify key K/D levels from which bullish / bearish market structure continues to develop. Chart means that every K/D cross above/below the signal lines will be notified on your Chart and not on the stocahstic oscillator. To see them on your chart please choose "Stochastic with Lines - Default" in my library. Once K or the D line cross over or under your upper or lower signal line you will see background colors which you can adjust in the settings menu. This small indicator is for a larger project which will be uploaded in several days/weeks.
Pine Script® indicator
by UnknownUnicorn5507594
Stoch Double Analysis MTFThis indicator utilizes the Stochastic Oscillator on two different timeframes and generates alerts for potential long and short conditions based on the crossovers of the %K and %D lines of the Stochastic Oscillator. Here's a detailed breakdown of the code: Inputs Overbought and Oversold Levels: ob_stc: Overbought level (default 80). os_stc: Oversold level (default 20). Timeframe 1 Configuration: tf_stoch_1: The first timeframe for analysis. length: Stochastic length (default 8). smoothK: Smoothing for %K line (default 5). smoothD: Smoothing for %D line (default 3). Timeframe 2 Configuration: tf_stoch_2: The second timeframe for analysis. length_another: Stochastic length for the second timeframe (default 12). smoothK_another: Smoothing for %K line for the second timeframe (default 7). smoothD_another: Smoothing for %D line for the second timeframe (default 3). Calculations Volume Trend Calculation: For both timeframes, the script calculates the volume trend. It determines up days and down days based on whether the closing price is higher or lower than the opening price and accumulates the volume accordingly. Cumulative Volume: Calculates the cumulative volume for up days and down days using the average of the high prices and the respective volumes. Stochastic Oscillator Calculation: Computes the %K and %D lines of the Stochastic Oscillator for both timeframes using the given lengths and smoothing factors. Alerts The script generates alerts for potential long and short conditions based on the crossovers of the %K and %D lines for both timeframes: Long Condition: When %K crosses above %D. Short Condition: When %D crosses above %K. Plotting Stochastic Lines: Plots the %K and %D lines for both timeframes with different colors (orange and blue for the first timeframe, green and red for the second timeframe). Overbought/Oversold Bands: Adds horizontal lines at the overbought and oversold levels and a middle band at 50. Fills the background between the overbought and oversold levels with a semi-transparent color. Code Structure Inputs Definition: Defines all input variables for customization. Volume Trend and Cumulative Volume Calculation: Computes volume trends and cumulative volumes for both timeframes. Stochastic Oscillator Calculation: Calculates the %K and %D lines using the request.security function to get data from the specified timeframes and apply the smoothing functions. Alert Conditions: Checks for crossovers between the %K and %D lines to generate alerts for potential trading signals. Plotting: Plots the %K and %D lines for both timeframes and adds visual elements for overbought and oversold levels. This indicator helps traders analyze market trends using the Stochastic Oscillator on multiple timeframes, providing potential buy and sell signals based on the interaction of the %K and %D lines. The alerts generated by the "Stoch Double Analysis MTF" indicator can be viewed as part of a broader educational and training path for traders!
Pine Script® indicator
by egghen
Stochastic CandlesIn this indicator I have transformed the %K line into adjustable candles. Because of this I have increased the length of the %D line to be more useful in this context. It is worth noting that you get the same momentum indication as %D set to 4 just because of the default candle transform setting. Incase you need to brush up on how stoch works here is the built in summery. The Stochastic Oscillator (STOCH) is a range bound momentum oscillator. The Stochastic indicator is designed to display the location of the close compared to the high/low range over a user defined number of periods. Typically, the Stochastic Oscillator is used for three things; Identifying overbought and oversold levels, spotting divergences and also identifying bull and bear set ups or signals.
Pine Script® indicator
by The_Peaceful_Lizard
9
Stochastic RSI rainbow in fibonacci sequence using VWMAThe standard stochastic RSI gives limited information as it only contains two reference lines. This Stochastic RSI rainbow contains more lines in shorter timeframes and progressively fewer as the reference time increase. This is done in a FIB sequence 2,3,8,13,21,34,55.... The shorter timeframes are more reactive to current market conditions indicating recent price action and the longer lines represent more significant periods of time. The indicator uses VWMA for its calculations (volume weighted moving average) HOW TO USE THIS INDICATOR: When multiple lines are above, either 70 or 80, you can consider the commodity overbought, or OB. The more lines that are above the threshhold, the more significant the signal. The same is true in inverse. In addition, you can use each cross to signify a buy/sell signal according to the type and quantity of trading you are doing. If you are looking to get in and out quickly you can use the lower timeframe signals. OPTIONS: You can change what data is used for the VWMA calculation... Of course, you can select colors and other properties as well.
Pine Script® indicator
by cryptofilio
1