Get started

Search in scripts for "市值大于100亿且市盈率小于5的股票最新数据更新时间"

Point and Figure (PnF) ChartThis is live and non-repainting Point and Figure Charting tool. The tool has it’s own P&F engine and not using integrated function of Trading View. Point and Figure method is over 150 years old. It consist of columns that represent filtered price movements. Time is not a factor on P&F chart but as you can see with this script P&F chart created on time chart. P&F chart provide several advantages, some of them are filtering insignificant price movements and noise, focusing on important price movements and making support/resistance levels much easier to identify. If you are new to Point & Figure Chart then you better get some information about it before using this tool. There are very good web sites and books. Please PM me if you need help about resources. Options in the Script Box size is one of the most important part of Point and Figure Charting. Chart price movement sensitivity is determined by the Point and Figure scale. Large box sizes see little movement across a specific price region, small box sizes see greater price movement on P&F chart. There are four different box scaling with this tool: Traditional, Percentage, Dynamic (ATR), or User-Defined 4 different methods for Box size can be used in this tool. User Defined: The box size is set by user. A larger box size will result in more filtered price movements and fewer reversals. A smaller box size will result in less filtered price movements and more reversals. ATR: Box size is dynamically calculated by using ATR, default period is 20. Percentage: uses box sizes that are a fixed percentage of the stock's price. If percentage is 1 and stock’s price is $100 then box size will be $1 Traditional: uses a predefined table of price ranges to determine what the box size should be. Price Range Box Size Under 0.25 0.0625 0.25 to 1.00 0.125 1.00 to 5.00 0.25 5.00 to 20.00 0.50 20.00 to 100 1.0 100 to 200 2.0 200 to 500 4.0 500 to 1000 5.0 1000 to 25000 50.0 25000 and up 500.0 Default value is “ATR”, you may use one of these scaling method that suits your trading strategy. If ATR or Percentage is chosen then there is rounding algorithm according to mintick value of the security. For example if mintick value is 0.001 and box size (ATR/Percentage) is 0.00124 then box size becomes 0.001. And also while using dynamic box size (ATR or Percentage), box size changes only when closing price changed. Reversal : It is the number of boxes required to change from a column of Xs to a column of Os or from a column of Os to a column of Xs. Default value is 3 (most used). For example if you choose reversal = 2 then you get the chart similar to Renko chart. Source: Closing price or High-Low prices can be chosen as data source for P&F charting. Chart Style: There are 3 options for chart style: “Candle”, “Area” or “Don’t show”. As Area: As Candle: X/O Column Style: it can show all columns from opening price or only last Xs/Os. Color Theme: different themes exist => Green/Red, Yellow/Blue, White/Yellow, Orange/Blue, Lime/Red, Blue/Red Show Breakouts is the option to show Breakouts This tool detects & shows following Breakouts: Triple Top/Bottom, Triple Top Ascending, Triple Bottom Descending, Simple Buy/Sell (Double Top/Bottom), Simple Buy With Rising Bottom, Simple Sell With Declining Top Catapult bullish/bearish Show Horizontal Count Targets: Finds the congestion or consolidation pattern and if there is breakout then it calculates the Target by using Horizontal Count method (based on the width of congestion pattern). It shows how many column exist on congestion area. There is no guarantee that prices will reach the target. Show Vertical Count Targets: When Triple Top/Bottom Breakouts occured the script calculates the target by using Vertical Count Method (based on the length of the column). There is no guarantee that prices will reach the target. For both methods there is auto target cancellation if price goes below congestion bottom or above congestion top. trend is calculated by EMA of closing price of the P&F Whipsaw protection: Last options are “Show info panel” and Labeling Offset. Script shows current box size, reversal, and recommanded minimum and maximum box size. And also it shows the price level to reverse the column (Xs <-> Os) and the price level to add at least 1 more box to column. This is the option to put these labels 10, 20, 30, 50 or 100 bars away from the last bar. Labeling content and color change according to X/O column. do not hesitate to comment.
Pine Script® indicator
by LonesomeTheBlue
65
Technical Analysis - Panel Info//A. Oscillators & B. Moving Averages base on TradingView's Technical Analysis by ThiagoSchmitz //C.Pivot base on Ultimate Pivot Points Alerts by elbartt //D. Summary & Panel info by anhnguyen14 Panel Info base on these indicators: A. Oscillators 1. Rsi (14) 2. Stochastic (14,3,3) 3. CCI (20) 4. ADX (14) 5. AO 6. Momentum (10) 7. MACD (12,26) 8. Stoch RSI (3,3,14,14) 9. %R (14) 10. Bull bear 11. UO (7,14,28) B. Moving Averages 1. SMA & EMA: 5-10-20-30-50-100-200 2. Ichimoku Cloud - Baseline (26) 3. Hull MA (9) C. Pivot 1. Traditional 2. Fibonacci 3. Woodie 4. Camarilla D. Summary Sum_red=A_red+B_red+C_red Sum_blue=A_blue+B_blue+C_blue sell_point=(Sum_red/32)*100 buy_point=(Sum_blue/32)*100 sell = Sum_red>Sum_blue and sell_point>50 Strong_sell = A_red>A_blue and B_red>B_blue and C_red>C_blue and sell_point>50 and not crossunder(sell_point,75) buy = Sum_red>Sum_blue and buy_point>50 Strong_buy = A_red50 and not crossunder(buy_point,75) neutral = not sell and not Strong_sell and not buy and not Strong_buy
Pine Script® indicator
by inno14
7
CCI RiderThis is my thank you to the TradingView community, for the people who are sharing their scripts, which allowed me to learn Pine Script. So here is my first creation, feel free to experiment, modify and use it as you wish. It is a CCI(default value is 100, can be changed), combined with an EMA of that CCI(default 21,changeable) that then colors the background according to the strength of the signal(if selected to do so). To generate strong signals, it also uses Bollinger Bands to prevent whipsaws in high volatility situations. The best signals are generated when the CCI crosses the limits set by the user (default is 100/-100), and is above/belov its EMA. Exit signals are indicated, when the CCI crosses its EMA. Unfortunately in strong trends, this exit signal is sometimes premature, using a 3x resolution of the indicator will improve this, maybe I will implement this in a later version. I use it mostly in 15min charts and higher, I found in shorter timeframes still a lot of whipsaws, maybe experimenting with different lengths and levels will improve this. As the Indicator allows the user to experiment with different lenghts and levels, and the colors will change according the setting, I find it a nice tool to search for the best mixture for different securities and timeframes. See below an example of a nice signal. I do suggest to use it in combination with other indicators.
Pine Script® indicator
by TradeSL
3
Yield Curve Version 2.55.2Welcome to Yield Curve Version 2.55.2 US10Y-US02Y * Please read description to help understand the information displayed. * NOTE - This script requires 1 real time update before accurate information is displayed, therefore WILL NOT display the correct information if the Bond Market is Closed over the Weekend. * NOTE - When values are changed Via Input setting they do take a bit to display based off all the information that is required to display this script. **FEATURES** * Input Features let you view the information the way YOU like via Input Settings * Displays Current Version Title - Toggleable On/Off via Input Settings - Default On * Plots the Yield Curve of the Bonds listed (Middle Green and Red Line) * Displays the Spread for each Bond (Top Green and Red Labels) - Toggleable On/Off via Input Settings - Change Size via Input Settings - Default On * Displays the current Yield for each Bond (Bottom Green and Red Labels) - Toggleable On/Off via Input Settings - Change Size via Input Settings - Default On - Large Size * Plots the Average of the Entire Yield Curve (BLUE Line within the Yield Curve) - Toggleable On/Off via Input Settings - Default On * Displays messages based off Yield Inversions (Orange Text) - Toggleable On/Off via Input Settings - Default On if Applicable * Displays 2 10 Inversion Warning Message (Orange Text) - Toggleable On/Off via Input Settings - Default On if Applicable * Plots Column Data at the Bottom that tries to help determine the Stability of the Yield Curve (More information Below about Stability) - Toggleable On/Off via Input Settings - Default On * Plots the 7,20 and 100 SMA of the STABILITY MAX OVERLOAD (More information Below about Stability Max Overload) - Toggleable On/Off via Input Settings - Default On for 100 SMA , 20 SMA and 7 SMA * Ability to Display Indicator Name and Value via Input Settings - Default On - Displays Stability Max Overload SMA Labels. Toggleable to Non SMA Values. See Below. **Bottom Columns are all about STABILITY** * I have tried to come up with an algorithm that helps understand the Stability of the Yield Curve. There are 3 Sections to the Bottom Columns. * Section 1 - STABILITY (Displayed as the lightest Green or Red Column) Values range from 0 to 1 where 1 equals the MOST UNSTABLE Curve and 0 equals the MOST STABLE Curve * Section 2 - STABILITY OVERLOAD (Displayed just above the Stability Column a shade darker Green or Red Column) * Section 3 - STABILITY MAX OVERLOAD (Displayed just above the Stability Overload Column a shade darker Green or Red Column) What this section tries to do is help understand the Stability of the Curve based on the inversions data. Lower values represent a MORE STABLE curve. If the Yield Curve currently has 0 Inversions all Stability factors should equal 0 and therefore not plot any lower columns. As the Yield Curve becomes more inverted each section represents a value based off that data. GREEN columns represent a MORE Stable Curve from the resolution prior and vise versa. (S SO SMO) STABILITY - tests the current Stability of the Curve itself again ranging from 0 to 1 where 0 equals the MOST Stable Curve and 1 equals the MOST Unstable Curve. STABILIY OVERLOAD - adds a value to STABLITY based off STABILITY itself. STABILITY MAX OVERLOAD - adds the Entire value to STABILITY derived again from STABILITY. This section also allows us to see the 7,20 and 100 SMA of the STABILITY MAX OVERLOAD which should always be the GREATEST of ALL STABILTY VALUES. *Indicator Labels How to use* Indicator Labels by default are turned On and will display Name and Value Labels for Stability Max Overload SMA values. To switch to (S SO SMO) Labels, toggle "Indicator Labels / SMO SMA Labels", via Input Settings. This button allows you to switch between the two Indicator Label Display options. You must have "Indicators" turned On to view the Labels and therefore is turned On by Default. To turn all of the Indicator Labels Off, simply disable "Indicators" via Input Settings. Remember - All information displayed can be tuned On or Off besides the Curve itself. There are also other Features Accessible Via the Input Settings. I will continue to update this script as there is more information I would like to gather and display! I hope you enjoy, OpptionsOnly
Pine Script® indicator
by UnknownUnicorn5129145
2
Ultimate Moving Average Package (17 MA's)Included is the: VWAP Current time frame 10 EMA Current time frame 20 EMA Current time frame 50 EMA Current time frame 10 SMA Current time frame 20 SMA Current time frame 50 SMA Daily 10 EMA Daily 20 EMA Daily 50 EMA Daily 50 SMA Daily 100 SMA Daily 200 SMA Weekly 100 SMA Weekly 200 SMA Monthly 100 SMA Monthly 200 SMA All Daily/Weekly/Monthly MA's can be seen on intraday charts. Current time frame MA's change depending on your time frame. Obviously you dont need all 17 on your chart but you can pick the ones you like and disable the rest.
Pine Script® indicator
by Craig_Stine
Bilateral Stochastic Oscillator - For The Sake Of EfficiencyIntroduction The stochastic oscillator is a feature scaling method commonly used in technical analysis, this method is the same as the running min-max normalization method except that the stochastic oscillator is in a range of (0,100) while min-max normalization is in a range of (0,1). The stochastic oscillator in itself is efficient since it tell's us when the price reached its highest/lowest or crossed this average, however there could be ways to further develop the stochastic oscillator, this is why i propose this new indicator that aim to show all the information a classical stochastic oscillator would give with some additional features. Min-Max Derivation The min-max normalization of the price is calculated as follow : (price - min)/(max - min) , this calculation is efficient but there is alternates forms such as : price - (max - min) - min/(max - min) This alternate form is the one i chosen to make the indicator except that both range (max - min) are smoothed with a simple moving average, there are also additional modifications that you can see on the code. The Indicator The indicator return two main lines, in blue the bull line who show the buying force and in red the bear line who show the selling force. An orange line show the signal line who represent the moving average of the max(bull,bear), this line aim to show possible exit/reversals points for the current trend. Length control the highest/lowest period as well as the smoothing amount, signal length control the moving average period of the signal line, the pre-filtering setting indicate which smoothing method will be used to smooth the input source before applying normalization. The default pre-filtering method is the sma. The ema method is slightly faster as you can see above. The triangular moving average is the moving average of another moving average, the impulse response of this filter is a triangular function hence its name. This moving average is really smooth. The lsma or least squares moving average is the fastest moving average used in this indicator, this filter try to best fit a linear function to the data in a certain window by using the least squares method. No filtering will use the source price without prior smoothing for the indicator calculation. Relationship With The Stochastic Oscillator The crosses between the bull and bear line mean that the stochastic oscillator crossed the 50 level. When the Bull line is equal to 0 this mean that the stochastic oscillator is equal to 0 while a bear line equal to 0 mean a stochastic oscillator equal to 100. The indicator and below a stochastic oscillator of both period 100 Using Levels Unlike a stochastic oscillator who would clip at the 0 and 100 level the proposed indicator is not heavily constrained in a range like the stochastic oscillator, this mean that you can apply levels to trigger signals Possible levels could be 1,2,3... even if the indicator rarely go over 3. Its then possible to create strategies using such levels as support or resistance one. Conclusion I've showed a modified stochastic oscillator who aim to show additional information to the user while keeping all the information a classical stochastic oscillator would give. The proposed indicator is no longer constrained in an hard range and posses more liberty to exploit its scale which in return allow to create strategies based on levels. For pinescript users what you can learn from this is that alternates forms of specific formulas can be extremely interesting to modify, changes can be really surprising so if you are feeling stuck, modifying alternates forms of know indicators can give great results, use tools such as sympy gamma to get alternates forms of formulas. Thanks for reading ! If you are looking for something or just want to say thanks try to pm me :)
Pine Script® indicator
by alexgrover
9
Chaikin MF% (CMFP) w. Alerts, Bells & Whistles [LucF]This is Chaikin’s Money Flow indicator on a 0-100 scale with buy/sell signals, alerts and other bells & whistles. It includes: - a fast EMA (16 periods by default), - a slow MA (64 periods by default), - histograms, - 3 different sorts of crosses, - big swings identification, - buy/sell signals on CMFP crossing back from outside user-defined levels, - buy/sell signals on the slow MA pivots above/below user-defined levels, - alerts on big swings and buy/sells. This indicator started with @LazyBear code (VAPI) at: @cI8DH then changed the scale to 0-100, which I find very useful: I then added the rest. The chart above shows both clean and busy versions of the indicator. Note that the default length is 10 rather than the commonly used 20. I use CMFP in conjunction with VFI and like the fact that it is faster than VFI. The default inputs show the way I normally use this indicator, with the slow MA shown in histogram mode. I find it gives good context to the signal line. Crosses between the two are often useful. The buy/sell signals aren’t the main attraction of this indicator, and nothing to write home about. Like the big swing markers, I think it’s more realistic to view them as pointers to potentially interesting areas on charts. Their nature makes them more suited to identifying reversals. They certainly aren’t reliable enough to turn this study into a strategy and I normally don’t use them. The levels pre-defined for the buy/sell signals on CMFP are most useful on short intervals. The buy/sell signals on the slow MA pivots work on a more complete range of intervals. Optimization for your specific instruments and intervals will improve their reliability. As usual when defining alerts, be sure you already have defined proper inputs and that you are on the intended interval, as they will be used when triggering alerts.
Pine Script® indicator
by LucF
Percentage Price Oscillator (PPO)The Percentage Price Oscillator (PPO) is a momentum oscillator that measures the difference between two moving averages as a percentage of the larger moving average. As with its cousin, MACD, the Percentage Price Oscillator is shown with a signal line, a histogram and a centerline. Signals are generated with signal line crossovers, centerline crossovers, and divergences. First, PPO readings are not subject to the price level of the security. Second, PPO readings for different securities can be compared, even when there are large differences in the price. Calculations PPO: {(12-day EMA - 26-day EMA)/26-day EMA} x 100 Signal Line: 9-day EMA of PPO PPO Histogram: PPO - Signal Line While MACD measures the absolute difference between two moving averages, PPO makes this a relative value by dividing the difference by the slower moving average (26-day EMA). PPO is simply the MACD value divided by the longer moving average. The result is multiplied by 100 to move the decimal place two spots. Interpretation As with MACD, the PPO reflects the convergence and divergence of two moving averages. PPO is positive when the shorter moving average is above the longer moving average. The indicator moves further into positive territory as the shorter moving average distances itself from the longer moving average. This reflects strong upside momentum. The PPO is negative when the shorter moving average is below the longer moving average. Negative readings grow when the shorter moving average distances itself from the longer moving average (goes further negative). This reflects strong downside momentum. The histogram represents the difference between PPO and its 9-day EMA, the signal line. The histogram is positive when PPO is above its 9-day EMA and negative when PPO is below its 9-day EMA. The PPO-Histogram can be used to anticipate signal line crossovers in the PPO. MACD, PPO and Price MACD levels are affected by the price of a security. A high-priced security will have higher or lower MACD values than a low-priced security, even if volatility is basically equal. This is because MACD is based on the absolute difference in the two moving averages. Because MACD is based on absolute levels, large price changes can affect MACD levels over an extended period of time. If a stock advances from 20 to 100, its MACD levels will be considerably smaller around 20 than around 100. The PPO solves this problem by showing MACD values in percentage terms. Conclusions The Percentage Price Oscillator (PPO) generates the same signals as the MACD, but provides an added dimension as a percentage version of MACD. The PPO levels of the Dow Industrials (price > 20K) can be compared against the PPO levels of IBM (price < 200) because the PPO “levels” the playing field. In addition, PPO levels in one security can be compared over extended periods of time, even if the price has doubled or tripled. This is not the case for the MACD. Limitations Despite its advantages, the PPO is still not the best oscillator to identify overbought or oversold conditions because movements are unlimited (in theory). Levels for RSI and the Stochastic Oscillator are limited and this makes them better suited to identify overbought and oversold levels. Source: Stockcharts
Pine Script® indicator
by getmohsin.py
1
Multiple Moving AveragesThis is really simple. But useful for me as I don't have a paid account. No-pro users can only use 3 indicators at once and because I rely heavily on simple moving averages it can be a real pain. This one indicator features: 20 MA 50 MA 100 MA 200 MA which I find are the most useful overall. The 20 and 50 over all time frame but in particular < 1 day, the 100 and 200 at > 4 hr time frames. In general I don't use the 100 MA that much. The daily 200 MA is a critical support for many assets like stocks and cryptos. I'm by no means a pro and if you are learning I recommend becoming familiar with moving averages right at the beginning. If you want to deactivate some of the lines, you can do it via the indicator's settings icon.
Pine Script® indicator
by RealMcafee
Exponential Moving Average (Set of 3) [Krypt] + 13/34 EMAsI took Krypt's script and essentially added on to it. the 20/50/100/200 EMAs should be used together as support and resistance as normal. Wait for price to break 200 EMA Wait for 50 EMA to cross 200 EMA Wait for pullback to 50 EMA to open position 20 and 100 EMAs are for extra information about moving support and resistance and 13/34 EMAs should be used in conjunction When 13 EMA crosses 34 EMA, open position When price gets far from 13/34, close position (because price will attempt to revert back to mean) This is better for scalping and swing trades than the 20/50/100/200 setup. Twitter: @AzorAhai06
Pine Script® indicator
by AzorAhai06
Ichimoku Cloud Score v1.0This script calculates a simple Ichimoku Score based on the signals documented here , with a few additions. Each of the score components can be individually weighted via the script inputs . The output is a plot of the normalized Ichimoku score, in the range of -100 to 100. This script has been heavily modified from 'Ichimoku Cloud Signal Score v2.0.0 '. Credit to user 'dashed' for the initial implementation. This has been modified with several refinements: Clean/Organized Code Simplified Inputs Improved Style Scores normalized to a range (-100, 100) Bugfixes and Improvements Script Inputs: i.imgur.com
Pine Script® indicator
by sjb933
6
Volume RatioDefinition: Volume ratio can be obtained in a similar way to RSI. Volume Ratio (%) = 100 - 100/(1+vr) The parameter "vr" is defined as vr=(A+U/2)/(D+U/2) A=Total volume of the periods when the price advanced D=Total volume of the periods when the price declined U=Total volume of the periods when the price unchanged After substitution, following expression can be derived and the denominator represents total volume of all periods. Volume Ratio (%) = 100 x (A+U/2)/(A+D+U) Notes: A similar method to interpret RSI can be employed. 1) Overbought level over 70% and oversold level under 30%. These levels need to be adjusted according to the periods, time frames and issues. 2) Bullish picture over 50% line and bearish picture under 50% line. 3) Crossing oversold level to the upside can be taken as a confirmation of bullish reversal. - and vice versa for a bearish reversal. 4) After a long-term bearish market, the increase of volume can happen in the early stage of a bullish market. 5) Buying opportunity can be suggested when the volume ratio is declining and the price is either advancing or leveling off.
Pine Script® indicator
by Mizuki32
6
Multi-Functional Fisher Transform MTF with MACDL TRIGGERWhat this indicator gives you is a true signal when price is exhausted and ready for a fast turnaround. Fisher Transform is set for multi-time frame and also allows the user to change the length. This way a user can compare two or more time spans and lengths to look for these MACDL divergent triggers after a Fisher exhaustion. With so many indicators, it's probably best to merge these indicators and change the Fisher and Trigger colors so you can still have a look at price action (remember to scale right after merger). I've noticed from time to time when you have Fisher 34 100 and 300 up and running on two different time frames such as 5 and 15 min charts, with MACDL triggers on the 100/300 or 34/100 you get a high probability trade trigger. However, there are rare exceptions such as when price moves in a parabolic state up or down for a long period where this indication does not work. Ideally this indicator works best in a sideways market or slow rising/descending moving market. This indicator was worked on by Glaz, nmike and myself LazyBear also introduced the MACDL indicator
Pine Script® indicator
by QuantitativeExhaustion
18
Geometric Price-Time Triangle Calculator═══════════════════════════════════════════════════ GEOMETRIC PRICE-TIME TRIANGLE CALCULATOR ═══════════════════════════════════════════════════ Calculates Point C of a geometric triangle using different rotation angles from any selected price swing. Based on Bradley F. Cowan's Price-Time Vector (PTV) methods from "Four-Dimensional Stock Market Structures and Cycles." 📐 WHAT IT DOES ──────────────────────────────────────────────────── Select two points (A and B) on any swing, choose an angle, and the indicator calculates where Point C would be mathematically. It's just vector rotation applied to price charts. This shows you where Point C lands in both price AND time based on pure geometry - not a prediction, just a calculation. 🎯 FEATURES ──────────────────────────────────────────────────── ✓ 10 Different Angles • Gann ratios: 18.435° (1x3), 26.565° (1x2), 45° (1x1), 63.435° (2x1), 71.565° (3x1) • Other angles: 30°, 60°, 90°, 120°, 150° ✓ Visual Triangle • Adjustable colors and opacity for points A, B, C • Line styles: Solid, Dashed, Dotted • Extend lines: None, Left, Right, Both ✓ Crosshair at Point C • Shows where Point C is located • Vertical line = bar position • Horizontal line = price level ✓ Data Table • Shows all calculations • Price-to-Bar ratio • Point C location (price and bars from A/B) • Toggle on/off 🔧 HOW TO USE ──────────────────────────────────────────────────── 1. Pick your swing start date (Point A) 2. Pick your swing end date (Point B) - make sure these dates capture the actual high/low of your swing 3. Choose an angle from the dropdown 4. Look at Point C - that's where the geometry puts it Different angles = different Point C locations. Whether price actually goes there is up to the market. 📊 THE ANGLES ──────────────────────────────────────────────────── - 18.435° (1x3) - Shallow rotation - 26.565° (1x2) - Moderate rotation - 45° (1x1) - Gann's balanced ratio - 60° - Equilateral triangle (default) - 63.435° (2x1) - Steeper rotation - 71.565° (3x1) - Very steep rotation - 90° - Right angle - 120°-150° - Obtuse angles 💡 PRACTICAL USE ──────────────────────────────────────────────────── → See where geometric patterns would complete → Test if your market respects certain angles → Find where multiple angles converge → Compare projected Point C to actual price action → Use 90° to see symmetrical price/time relationships → Backtest historical swings to see what worked ⚙️ HOW IT WORKS ──────────────────────────────────────────────────── 1. Takes your AB swing 2. Calculates the BA vector (reverse direction) 3. Normalizes price and time using Price-to-Bar ratio 4. Rotates the vector by your selected angle 5. Converts back to chart coordinates Basic trigonometry. That's all it is. 📚 BACKGROUND ──────────────────────────────────────────────────── Based on Bradley F. Cowan's Price-Time Vector (PTV) concept from "Four-Dimensional Stock Market Structures and Cycles" and W.D. Gann's geometric angle analysis. Cowan observed that markets sometimes complete geometric patterns. This tool calculates where those patterns would complete mathematically. Whether price actually respects these geometric relationships is something you need to test yourself. ⚠️ IMPORTANT ──────────────────────────────────────────────────── - This is geometric calculation, not prediction - Point C shows where the math puts it, not where price will go - Some angles might work for your market, some won't - Test it yourself on historical data - Price-to-Bar Ratio stays constant regardless of angle - Don't trade based on this alone - Works on all timeframes and assets 🎨 CUSTOMIZATION ──────────────────────────────────────────────────── - Show/hide triangle - Individual colors for A, B, C points - Adjust opacity (0-100) - Line styles for each triangle side - Extend lines left/right/both/none - Show/hide data table - Crosshair color and width - Customizable table colors ═══════════════════════════════════════════════════
Pine Script® indicator
by geneclash
Risk & Position DashboardRisk & Position Dashboard Overview The Risk & Position Dashboard is a comprehensive trading tool designed to help traders calculate optimal position sizes, manage risk, and visualize potential profit/loss scenarios before entering trades. This indicator provides real-time calculations for position sizing based on account size, risk percentage, and stop-loss levels, while displaying multiple take-profit targets with customizable risk-reward ratios. Key Features Position Sizing & Risk Management: Automatic position size calculation based on account size and risk percentage Support for leveraged trading with maximum leverage limits Fractional shares support for brokers that allow partial share trading Real-time fee calculation including entry, stop-loss, and take-profit fees Break-even price calculation including trading fees Multi-Target Profit Management: Support for up to 3 take-profit levels with individual portion allocations Customizable risk-reward ratios for each take-profit target Visual profit/loss zones displayed as colored boxes on the chart Individual profit calculations for each take-profit level Visual Dashboard: Clean, customizable table display showing all key metrics Configurable label positioning and styling options Real-time tracking of whether stop-loss or take-profit levels have been reached Color-coded visual zones for easy identification of risk and reward areas Advanced Configuration: Comprehensive input validation and error handling Support for different chart timeframes and symbols Customizable colors, fonts, and display options Hide/show individual data fields for personalized dashboard views How to Use Set Account Parameters: Configure your account size, maximum risk percentage per trade, and trading fees in the "Account Settings" section. Define Trade Setup: Use the "Entry" time picker to select your entry point on the chart, then input your entry price and stop-loss level. Configure Take Profits: Set your desired risk-reward ratios and portion allocations for each take-profit level. The script supports 1-3 take-profit targets. Analyze Results: The dashboard will automatically calculate and display position size, number of shares, potential profits/losses, fees, and break-even levels. Visual Confirmation: Colored boxes on the chart show profit zones (green) and loss zones (red), with lines extending to current price levels. Reset Entry and SL: You can easily reset the entry and stop-loss by clicking the "Reset points..." button from the script's "More" menu. This is useful if you want to quickly clear your current trade setup and start fresh without manually adjusting the points on the chart. Calculations The script performs sophisticated calculations including: Position size based on risk amount and price difference between entry and stop-loss Leverage requirements and position amount calculations Fee-adjusted risk-reward ratios for realistic profit expectations Break-even price including all trading costs Individual profit calculations for partial position closures Detailed Take-Profit Calculation Formula: The take-profit prices are calculated using the following mathematical formula: // Core variables: // risk_amount = account_size * (risk_percentage / 100) // total_risk_per_share = |entry_price - sl_price| + (entry_price * fee%) + (sl_price * fee%) // shares = risk_amount / total_risk_per_share // direction_factor = 1 for long positions, -1 for short positions // Take-profit calculation: net_win = total_risk_per_share * shares * RR_ratio tp_price = (net_win + (direction_factor * entry_price * shares) + (entry_price * fee% * shares)) / (direction_factor * shares - fee% * shares) Step-by-step example for a long position (based on screenshot): Account Size: 2,000 USDT, Risk: 2% = 40 USDT Entry: 102,062.9 USDT, Stop Loss: 102,178.4 USDT, Fee: 0.06% Risk per share: |102,062.9 - 102,178.4| + (102,062.9 × 0.0006) + (102,178.4 × 0.0006) = 115.5 + 61.24 + 61.31 = 238.05 USDT Shares: 40 ÷ 238.05 = 0.168 shares (rounded to 0.17 in display) Position Size: 0.17 × 102,062.9 = 17,350.69 USDT Position Amount (with 9x leverage): 17,350.69 ÷ 9 = 1,927.85 USDT For 2:1 RR: Net win = 238.05 × 0.17 × 2 = 80.94 USDT TP1 price = (80.94 + (1 × 102,062.9 × 0.17) + (102,062.9 × 0.0006 × 0.17)) ÷ (1 × 0.17 - 0.0006 × 0.17) = 101,464.7 USDT For 3:1 RR: TP2 price = 101,226.7 USDT (following same formula with RR=3) This ensures that after accounting for all fees, the actual risk-reward ratio matches the specified target ratio. Risk Management Features Maximum Trade Amount: Optional setting to limit position size regardless of account size Leverage Limits: Built-in maximum leverage protection Fee Integration: All calculations include realistic trading fees for accurate expectations Validation: Automatic checking that take-profit portions sum to 100% Historical Tracking: Visual indication when stop-loss or take-profit levels are reached (within last 5000 bars) Understanding Max Trade Amount - Multiple Simultaneous Trades: The "Max Trade Amount" feature is designed for traders who want to open multiple positions simultaneously while maintaining proper risk management. Here's how it works: Key Concept: - Risk percentage (2%) always applies to your full Account Size - Max Trade Amount limits the capital allocated per individual trade - This allows multiple trades with full risk on each trade Example from Screenshot: Account Size: 2,000 USDT Max Trade Amount: 500 USDT Risk per Trade: 2% × 2,000 = 40 USDT per trade Stop Loss Distance: 0.11% from entry Result: Position Size = 17,350.69 USDT with 35x leverage Total Risk (including fees): 40.46 USDT Multiple Trades Strategy: With this setup, you can open: Trade 1: 40 USDT risk, 495.73 USDT position amount (35x leverage) Trade 2: 40 USDT risk, 495.73 USDT position amount (35x leverage) Trade 3: 40 USDT risk, 495.73 USDT position amount (35x leverage) Trade 4: 40 USDT risk, 495.73 USDT position amount (35x leverage) Total Portfolio Exposure: - 4 simultaneous trades = 4 × 495.73 = 1,982.92 USDT position amount - Total risk exposure = 4 × 40 = 160 USDT (8% of account)
Pine Script® indicator
by HllN
Golden Flow MapGolden Flow Mapis a multi–timeframe moving–average system designed to reveal the underlying direction of long–term market flow, beyond daily volatility or short–term signals. This script overlays four major trend lines — each representing a different layer of market rhythm: Timeframe Length Meaning 🟣 1D – 365 MA Annual average — the true life line of the trend 🔴 1D – 200 MA Institutional benchmark — the long-term threshold 🟢 1W – 20 MA Mid-cycle momentum guide 🟠 3D – 100 MA Wave transition detector — captures trend shifts early By combining these four perspectives on a single chart, you can instantly distinguish between a short-term bounce and a major trend reversal. 🧭 How to Use When all four lines align in one direction → that’s the main current of the market. If price loses the 200D or 365D, ignore small rebounds — the structure has shifted. The cross between Weekly 20 and 3D 100 often marks a wave transition. Focus on alignment order rather than crossovers — markets ultimately return to the direction of the higher timeframe. ⚙️ Features SMA / EMA toggle Individual MA on/off controls Built-in alerts for 200D and 1W20 cross events 🧠 Concept “Indicators are not signals — they are maps.” This tool is not meant to predict, but to reveal the pulse of the market and guide you through its long-term structure. ✍️ Creator’s Note Developed from DDU’s personal long-term trend framework, this indicator serves as a visual compass to expand a trader’s vision from short-term reactions to macro-level flow.
Pine Script® indicator
by ddu009
Golden Flow MapGolden Flow Map is a multi–timeframe moving–average system designed to reveal the underlying direction of long–term market flow, beyond daily volatility or short–term signals. This script overlays four major trend lines — each representing a different layer of market rhythm: Timeframe Length Meaning 🟣 1D – 365 MA Annual average — the true life line of the trend 🔴 1D – 200 MA Institutional benchmark — the long-term threshold 🟢 1W – 20 MA Mid-cycle momentum guide 🟠 3D – 100 MA Wave transition detector — captures trend shifts early By combining these four perspectives on a single chart, you can instantly distinguish between a short-term bounce and a major trend reversal. 🧭 How to Use When all four lines align in one direction → that’s the main current of the market. If price loses the 200D or 365D, ignore small rebounds — the structure has shifted. The cross between Weekly 20 and 3D 100 often marks a wave transition. Focus on alignment order rather than crossovers — markets ultimately return to the direction of the higher timeframe. ⚙️ Features SMA / EMA toggle Individual MA on/off controls Built-in alerts for 200D and 1W20 cross events 🧠 Concept “Indicators are not signals — they are maps.” This tool is not meant to predict, but to reveal the pulse of the market and guide you through its long-term structure. ✍️ Creator’s Note Developed from DDU’s personal long-term trend framework, this indicator serves as a visual compass to expand a trader’s vision from short-term reactions to macro-level flow.
Pine Script® indicator
by ddu009
Pinbar MTF - No Repaint# Pinbar MTF - No Repaint Indicator ## Complete Technical Documentation --- ## 📊 Overview **Pinbar MTF (Multi-Timeframe) - No Repaint** is a professional-grade TradingView Pine Script indicator designed to detect high-probability pinbar reversal patterns with advanced filtering systems. The indicator is specifically engineered to be **100% non-repainting**, making it reliable for both live trading and backtesting. ### Key Features ✅ **Non-Repainting** - Signals only appear AFTER bar closes, never disappear ✅ **Three-Layer Filter System** - ATR, SWING, and RSI filters ✅ **Automatic SL/TP Calculation** - Based on risk:reward ratios ✅ **Real-time Alerts** - TradingView notifications for all signals ✅ **Visual Trade Management** - Lines, labels, and areas for entries, stops, and targets ✅ **Backtesting Ready** - Reliable historical data for strategy testing --- ## 🎯 What is a Pinbar? A **Pinbar (Pin Bar/Pinocchio Bar)** is a single candlestick pattern that indicates a potential price reversal: ### Bullish Pinbar (BUY Signal) - **Long lower wick** (rejection of lower prices) - **Small body at the top** of the candle - Shows buyers rejected sellers' attempt to push price down - Forms at support levels or swing lows - Entry signal for LONG positions ### Bearish Pinbar (SELL Signal) - **Long upper wick** (rejection of higher prices) - **Small body at the bottom** of the candle - Shows sellers rejected buyers' attempt to push price up - Forms at resistance levels or swing highs - Entry signal for SHORT positions --- ## 🔧 How the Indicator Works ### 1. **Pinbar Detection Logic** The indicator analyzes the **previous closed bar ** to identify pinbar patterns: ``` Bullish Pinbar Requirements: - Lower wick > 72% of total candle range (adjustable) - Upper wick < 28% of total candle range - Close > Open (bullish candle body) Bearish Pinbar Requirements: - Upper wick > 72% of total candle range (adjustable) - Lower wick < 28% of total candle range - Close < Open (bearish candle body) ``` **Why check ?** By analyzing the previous completed bar, we ensure the pattern is fully formed and won't change, preventing repainting. --- ### 2. **Three-Layer Filter System** #### 🔍 **Filter #1: ATR (Average True Range) Filter** - **Purpose**: Ensures the pinbar has significant size - **Function**: Only signals if pinbar range ≥ ATR value - **Benefit**: Filters out small, insignificant pinbars - **Settings**: - Enable/Disable toggle - ATR Period (default: 7) **Example**: If ATR = 50 pips, only pinbars with 50+ pip range will signal. --- #### 🔍 **Filter #2: SWING Filter** (Always Active) - **Purpose**: Confirms pinbar forms at swing highs/lows - **Function**: Validates the pinbar is an absolute high/low - **Benefit**: Identifies true reversal points - **Settings**: - Swing Candles (default: 3) **How it works**: - For bullish pinbar: Checks if low is lowest of past 3 bars - For bearish pinbar: Checks if high is highest of past 3 bars **Example**: With 3 swing candles, a bullish pinbar must have the lowest low among the last 3 bars. --- #### 🔍 **Filter #3: RSI (Relative Strength Index) Filter** - **Purpose**: Confirms momentum conditions - **Function**: Prevents signals in extreme momentum zones - **Benefit**: Avoids counter-trend trades - **Settings**: - Enable/Disable toggle - RSI Period (default: 7) - RSI Source (Close, Open, High, Low, HL2, HLC3, OHLC4) - Overbought Level (default: 70) - Oversold Level (default: 30) **Logic**: - Bullish Pinbar: Only signals if RSI < 70 (not overbought) - Bearish Pinbar: Only signals if RSI > 30 (not oversold) --- ### 3. **Stop Loss Calculation** Two methods available: #### Method A: ATR-Based Stop Loss (Recommended) ``` Bullish Pinbar: SL = Pinbar Low - (1 × ATR) Bearish Pinbar: SL = Pinbar High + (1 × ATR) ``` **Benefit**: Dynamic stops that adapt to market volatility #### Method B: Fixed Pips Stop Loss ``` Bullish Pinbar: SL = Pinbar Low - (Fixed Pips) Bearish Pinbar: SL = Pinbar High + (Fixed Pips) ``` **Settings**: - Calculate Stop with ATR (toggle) - Stop Pips without ATR (default: 5) --- ### 4. **Take Profit Calculation** Take Profit is calculated based on Risk:Reward ratio: ``` Bullish Trade: TP = Entry + (Entry - SL) × Risk:Reward Ratio Bearish Trade: TP = Entry - (SL - Entry) × Risk:Reward Ratio ``` **Example**: - Entry: 1.2000 - SL: 1.1950 (50 pip risk) - RR: 2:1 - TP: 1.2100 (100 pip reward = 50 × 2) **Settings**: - Risk:Reward Ratio (default: 1.0, range: 0.1 to 10.0) --- ## 📈 Visual Elements ### On-Chart Displays 1. **Signal Markers** - 🟢 **Green Triangle Up** = Bullish Pinbar (BUY) - 🔴 **Red Triangle Down** = Bearish Pinbar (SELL) - Placed directly on the pinbar candle 2. **Entry Labels** - Green "BUY" label with entry price - Red "SELL" label with entry price - Shows exact entry level 3. **Stop Loss Lines** - 🔴 Red horizontal line - "SL" label - Extends 20 bars forward 4. **Take Profit Lines** - 🟢 Green horizontal line - "TP" label - Extends 20 bars forward 5. **Risk/Reward Areas** (Optional) - Red shaded box = Risk zone (Entry to SL) - Green shaded box = Reward zone (Entry to TP) - Visual risk:reward visualization 6. **Info Table** (Top Right) - Displays current settings - Shows filter status (ON/OFF) - Real-time RSI value - Quick reference panel --- ## 🔔 Alert System Three alert types available: ### 1. Combined Alert: "Pinbar Signal (Any Direction)" - Fires for BOTH bullish and bearish pinbars - **Best for**: General monitoring - **Message**: "Pinbar Signal Detected on {TICKER} at {PRICE}" ### 2. Bullish Alert: "Bullish Pinbar Alert" - Fires ONLY for BUY signals - **Best for**: Long-only strategies - **Message**: "BUY Signal on {TICKER} at {PRICE}" ### 3. Bearish Alert: "Bearish Pinbar Alert" - Fires ONLY for SELL signals - **Best for**: Short-only strategies - **Message**: "SELL Signal on {TICKER} at {PRICE}" --- ## ⚙️ Input Parameters Reference ### **Filters Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | ATR Filter on Pinbar Range? | ✅ ON | Boolean | Enable/disable ATR filter | | ATR Period | 7 | 1+ | Lookback period for ATR calculation | | Swing Candles | 3 | 1+ | Bars to check for swing high/low | | RSI Filter on Pinbar? | ❌ OFF | Boolean | Enable/disable RSI filter | | RSI Period | 7 | 2+ | Lookback period for RSI calculation | | RSI Source | Close | Multiple | Price data for RSI (Close/Open/High/Low/etc) | | RSI Overbought Level | 70 | 50-100 | Upper threshold for RSI filter | | RSI Oversold Level | 30 | 0-50 | Lower threshold for RSI filter | ### **Pinbar Detection Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Shadow % vs Body | 72 | 50-95 | Minimum wick size as % of total range | ### **Visualization Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Show SL and TP Lines? | ✅ ON | Boolean | Display stop loss and take profit lines | | Show SL and TP Area? | ❌ OFF | Boolean | Show shaded risk/reward boxes | ### **Risk Management Group** | Parameter | Default | Range | Description | |-----------|---------|-------|-------------| | Risk:Reward Ratio | 1.0 | 0.1-10.0 | Target profit vs risk (1.0 = 1:1, 2.0 = 1:2) | | Calculate Stop with ATR? | ✅ ON | Boolean | Use ATR for stop calculation | | Stop Pips without ATR | 5 | 1+ | Fixed pip stop when ATR disabled | --- ## 🚫 Non-Repainting Architecture ### What is Repainting? **Repainting** occurs when an indicator's historical signals differ from what appeared in real-time. This makes backtesting unreliable and can lead to false confidence in a strategy. ### How This Indicator Prevents Repainting 1. **Closed Bar Analysis** - All calculations use ` ` offset (previous bar) - Only analyzes COMPLETED candles - Signals appear on the bar AFTER the pinbar closes 2. **Confirmed Swing Points** - Waits for sufficient bar history before signaling - Only checks historical bars that cannot change - Prevents premature swing detection 3. **Static Alert Timing** - Alerts fire only after bar completion - No conditional logic that changes historically - Same results in replay mode and live trading ### Verification Method To verify non-repainting behavior: 1. Apply indicator to chart 2. Note signal locations and prices 3. Refresh browser / reload chart 4. **Signals remain in exact same locations** --- ## 💼 Trading Strategy Guidelines ### Entry Rules **For Bullish Pinbar (LONG):** 1. Wait for green triangle to appear 2. Enter at close of pinbar (shown in label) 3. Alternative: Enter on break of pinbar high 4. Place stop loss at red SL line 5. Set target at green TP line **For Bearish Pinbar (SHORT):** 1. Wait for red triangle to appear 2. Enter at close of pinbar (shown in label) 3. Alternative: Enter on break of pinbar low 4. Place stop loss at red SL line 5. Set target at green TP line ### Risk Management - **Position Sizing**: Risk only 1-2% of account per trade - **Stop Loss**: Always use the calculated SL (never move it wider) - **Take Profit**: Use calculated TP or trail stop after 1:1 RR - **Multiple Timeframes**: Confirm signals on higher timeframe ### Best Practices ✅ **DO:** - Wait for bar to close before entering - Trade in direction of higher timeframe trend - Use on liquid markets with clear support/resistance - Combine with price action analysis - Keep a trading journal ❌ **DON'T:** - Enter before bar closes (prevents seeing full pattern) - Trade against strong trends - Ignore the filters (they improve win rate) - Risk more than 2% per trade - Trade every signal (be selective) --- ## 📊 Backtesting & Data Export ### Available Data Points The indicator exports these values for strategy development: | Output | Description | |--------|-------------| | Bullish Signal | 1 = BUY signal, 0 = No signal | | Bearish Signal | 1 = SELL signal, 0 = No signal | | Bull SL | Stop loss level for long trades | | Bull TP | Take profit level for long trades | | Bull Entry | Entry price for long trades | | Bear SL | Stop loss level for short trades | | Bear TP | Take profit level for short trades | | Bear Entry | Entry price for short trades | ### How to Use in Strategy These values can be accessed by Pine Script strategies using: ```pine indicator_values = request.security(syminfo.tickerid, timeframe.period, ) ``` --- ## 🎓 Understanding the Filters ### Why Use Multiple Filters? Single-indicator systems often generate too many false signals. This indicator uses a **confluence approach**: 1. **Pinbar Pattern** = Price rejection detected 2. **+ SWING Filter** = Rejection at key level 3. **+ ATR Filter** = Significant move 4. **+ RSI Filter** = Favorable momentum **Result**: Higher probability setups with better risk:reward ### Filter Optimization **Conservative Settings** (Fewer, Higher Quality Signals): - ATR Filter: ON - Swing Candles: 5 - RSI Filter: ON - Shadow %: 75% **Aggressive Settings** (More Signals, More Noise): - ATR Filter: OFF - Swing Candles: 2 - RSI Filter: OFF - Shadow %: 65% **Balanced Settings** (Recommended): - ATR Filter: ON - Swing Candles: 3 - RSI Filter: OFF (or ON for trending markets) - Shadow %: 72% --- ## 🔍 Troubleshooting ### "No Signals Appearing" **Possible Causes:** 1. Filters are too strict 2. No pinbars forming on chart 3. Insufficient bar history **Solutions:** - Reduce Shadow % to 65% - Reduce Swing Candles to 2 - Disable ATR or RSI filters temporarily - Check that chart has enough data loaded ### "Too Many Signals" **Solutions:** - Enable ATR filter - Increase Swing Candles to 4-5 - Enable RSI filter - Increase Shadow % to 75-80% ### "Signals Appearing Late" **This is normal behavior!** The indicator: - Analyzes previous closed bar - Signals appear on the bar AFTER the pinbar - This is what prevents repainting - Signal latency is 1 bar (by design) --- ## 📝 Technical Specifications **Indicator Type:** Overlay (displays on price chart) **Pine Script Version:** 5 **Max Labels:** 500 **Max Lines:** 500 **Repainting:** None (100% non-repainting) **Data Window Values:** 8 exported values **Alert Types:** 3 (Combined, Bullish, Bearish) **Performance:** - Lightweight script (fast execution) - Works on all timeframes - Compatible with all markets (Forex, Crypto, Stocks, Futures) - No data snooping bias --- ## 🎯 Use Cases ### 1. **Swing Trading** - Timeframe: Daily, 4H - Filter Settings: All enabled - Best for: Catching major reversals ### 2. **Day Trading** - Timeframe: 15m, 1H - Filter Settings: ATR + SWING only - Best for: Intraday reversals ### 3. **Scalping** - Timeframe: 5m, 15m - Filter Settings: SWING only (aggressive) - Best for: Quick reversals (requires experience) ### 4. **Position Trading** - Timeframe: Weekly, Daily - Filter Settings: All enabled + high RR (2:1 or 3:1) - Best for: Long-term trend reversal catches --- ## 🏆 Advantages Over Other Pinbar Indicators ✅ **Guaranteed Non-Repainting** - Many pinbar indicators repaint; this one never does ✅ **Automatic SL/TP** - No manual calculation needed ✅ **Multi-Layer Filtering** - Reduces false signals significantly ✅ **Visual Trade Management** - Clear entry, stop, and target levels ✅ **Flexible Configuration** - Adaptable to any trading style ✅ **Alert System** - Never miss a setup ✅ **Backtesting Ready** - Reliable historical data ✅ **Professional Grade** - Suitable for live trading --- ## 📚 Educational Resources ### Recommended Reading on Pinbars - "The Pin Bar Trading Strategy" by Nial Fuller - "Price Action Trading" by Al Brooks - TradingView Education: Price Action Patterns ### Practice Recommendations 1. Paper trade signals for 20+ trades before live trading 2. Backtest on different timeframes and markets 3. Keep detailed records of all trades 4. Analyze winning vs losing setups 5. Refine filter settings based on results --- ## ⚖️ Disclaimer This indicator is a tool for technical analysis and does not guarantee profits. Trading involves substantial risk of loss. Past performance is not indicative of future results. - Always use proper risk management - Never risk more than you can afford to lose - Consider your trading experience and objectives - Seek independent financial advice if needed --- ## 📧 Version Information **Current Version:** 1.0 **Last Updated:** 2024 **Compatibility:** TradingView Pine Script v5 **Status:** Production Ready --- ## 🔄 Future Enhancements (Potential) Possible future additions: - Multi-timeframe confirmation option - Volume filter integration - Customizable color schemes - Win rate statistics display - Partial profit taking levels - Trailing stop functionality --- ## 📖 Quick Start Guide ### 5-Minute Setup 1. **Add to Chart** - Open TradingView - Go to Pine Editor - Paste the code - Click "Add to Chart" 2. **Configure Settings** - Open indicator settings (gear icon) - Start with default settings - Enable "Show SL and TP Lines" 3. **Set Alert** - Right-click indicator name - Click "Add Alert" - Select "Pinbar Signal (Any Direction)" - Configure notification method 4. **Test** - Scroll back on chart - Verify signals make sense - Check that signals don't repaint 5. **Trade** (After Practice!) - Wait for alert - Verify signal quality - Enter, place SL/TP - Manage trade --- ## 🎯 Final Thoughts The **Pinbar MTF - No Repaint** indicator is designed for serious traders who value: - **Reliability** over flashy signals - **Quality** over quantity - **Honesty** over false promises This indicator will NOT: - Make you rich overnight - Win every trade - Replace proper trading education This indicator WILL: - Identify high-probability reversal setups - Save you analysis time - Provide consistent, non-repainting signals - Help you develop a systematic trading approach **Success in trading comes from:** 1. Proper education (60%) 2. Risk management (30%) 3. Technical tools like this indicator (10%) Use this tool as part of a complete trading plan, not as a standalone solution.
Pine Script® indicator
by Makshels