Get started

Sentiment

VWAP FadeVWAP fade indicator simple parameters for how it works and the logic behind VWAP fade You can try other products but recommended for Copper/Silver futures due to how they tend to do the VWAP fade Identify VWAP retest: Price moves back into VWAP after trending away. Fail condition: Candle touches VWAP but fails to close across it (stays on trend side). Signal: Short if price came from below and fails to close above VWAP. Long if price came from above and fails to close below VWAP. Confirm with volume spike (optional filter).
Pine Script® indicator
by AmandasTradesBang
2
Market Bias [Mario]Indicator Description: Market Bias Core Objective and Philosophy The Market Bias indicator is designed not as a simple signal generator, but as a comprehensive tool for trend analysis and directional bias assessment. Its primary purpose is to provide traders with a clear, at-a-glance understanding of the market's direction across multiple timeframes. By visualizing the alignment of trends, it helps traders make more informed decisions, ensuring they are trading in harmony with the broader market momentum rather than against it. This is a tool for strategic positioning, not for providing blind buy or sell commands. How It Works: The Core Mechanic The indicator's logic is based on the relationship between two configurable moving averages (MAs): a Fast MA (defaulting to a 9-period EMA) and a Slow MA (defaulting to a 21-period SMA). The market bias on any given timeframe is determined as follows: Bullish Bias: When the Fast MA is trading above the Slow MA, it indicates positive, upward momentum. Bearish Bias: When the Fast MA is trading below the Slow MA, it indicates negative, downward momentum. Users have full control to customize the type (SMA, EMA, WMA, etc.) and length of each moving average to fit their specific trading style and the asset being analyzed. Key Feature: The Higher Timeframe (HTF) Bias Table This is the most powerful feature of the indicator and its main reason for existence. It displays a simple, color-coded table in the corner of the chart, showing the real-time bias for the Daily (D), 4-Hour (4H), and 1-Hour (1H) timeframes. Purpose: The HTF table solves a critical problem for traders: losing sight of the bigger picture. A trader on a 15-minute chart might see a setup to go long, but if the 4H and Daily charts are strongly bearish, that trade is fighting a powerful current and has a lower probability of success. Application: By checking this table, a trader can instantly verify if their intended trade direction is aligned with the higher timeframe trends. The ideal scenario is "confluence," where the bias is the same across all key timeframes (e.g., D, 4H, and 1H are all Bullish), giving the trader a strong conviction to only look for long entries. On-Chart Visual Aids To support the analysis on the current chart, the indicator provides several visual aids: Moving Average Plots: Both the Fast and Slow MAs are drawn directly on the chart, allowing traders to see their interaction with price in real-time. Color-Coded Bars: To make the current trend immediately obvious, the chart's price bars can be colored. Green bars signify a bullish bias (Fast > Slow), while red bars signify a bearish bias (Fast < Slow). Crossover Markers (Optional): While the indicator is not a signal provider, it can optionally display "Buy" (up arrow) and "Sell" (down arrow) markers when the MAs cross. These should not be interpreted as direct trade signals. Instead, they serve as alerts that the market momentum may be shifting on the current timeframe. They are best used as points of interest or for confirming a thesis that is already supported by the HTF bias. Summary In essence, the Market Bias indicator is a decision-support tool. It encourages a disciplined, top-down approach to trading. Use the HTF Table first to establish your strategic directional bias for the day or week. Use the on-chart MAs and colored bars to analyze the trend on your preferred trading timeframe. Use the optional crossover markers only as a final confirmation or timing tool, ensuring they align with the dominant bias established by the higher timeframes.
Pine Script® indicator
by MarioLeb
Chimera [theUltimator5]In myth, the chimera is an “impossible” hybrid—lion, goat, and serpent fused into one—striking to look at and formidable in presence. The word has come to mean a beautiful, improbable union of parts that shouldn’t work together, yet do. Chimera is a dual-mode market context tool that blends a multi-input oscillator with classic ADX/DI trend strength, plus optional multi-timeframe “gap-line” tracking. Use it to visualize regime (trend vs. range), momentum swings around an adaptive midline, and higher timeframe (HTF) reference levels that auto-terminate on touch/cross. Modes 1) Oscillator view A smoothed composite of five common inputs—RSI, MACD (oscillator), Bollinger position, Stochastic, and an ATR/DI-weighted bias. Each is normalized to a comparable 0–100 style scale, averaged, and plotted as a candle-style oscillator (short vs. long smoothing, wickless for clarity). A dynamic midline with standard-deviation bands frames neutral → bearish/bullish zones. Colors ramp from neutral to your chosen Oversold/Overbought endpoints; consolidation can override to white. Here is a description of the (5) signals used to calculate the sentiment oscillator: RSI (14): Measures recent momentum by comparing average gains vs. losses. High = strength after advances; low = weakness after declines. (Z-score normalized to 0–100.) MACD oscillator (12/26/9): Uses the difference between MACD and its signal (histogram) to gauge momentum shifts. Positive = bullish tilt; negative = bearish. (Z-score normalized.) Bollinger Bands position (20, 2): Locates price within the bands (0–100 from lower → upper). Near upper suggests strength/expansion; near lower suggests weakness/contraction. (Then normalized.) Stochastic (14, 3, 3): Shows where the close sits within the recent high-low range, smoothed via %D. Higher values = closes near highs; lower = near lows. (Scaled 0–100.) ATR/DI composite (14): Volatility-weighted directional bias: (+DI − −DI) amplified by ATR as a % of price and its relative average. Positive = bullish pressure with volatility; negative = bearish. (Rank/scale normalized.) All five are normalized and averaged into one composite, then smoothed (short/long) and compared to an adaptive midline with bands. 2) ADX view Shows ADX, +DI, –DI with user-defined High Threshold. Transparency and color shift with regime. When ADX is strong, a directional “fire/ice” gradient fills the area between ADX and the high threshold, biased toward the dominant DI; when ADX is weak, a soft white fade highlights low-trend conditions. HTF gap-line tracking (optional; both modes) Detects “gap-like” reference levels after weak-trend consolidation flips into a sudden DI jump. Anchors a line at the event bar’s open and auto-terminates upon first touch/cross (tick-size tolerance). Auto-selects up to three higher timeframes suited to your chart resolution and prints non-overlapping lines with labels like 1H / 4H / 1D. Lower-priority duplicates are suppressed to reduce clutter. Confirmation / repaint notes Signals and lines finalize on bar close of the relevant timeframe. HTF elements update only on the HTF bar close. During a forming bar they may appear transiently. Line removal finalizes after the bar that produced the touch/cross closes. Visual cues & effects Oscillator candles: Open/High = long smoothing; Low/Close = short smoothing (no wicks). Adaptive bands: Midline ± StdDev Multiplier × stdev of the blended series. Consolidation tint: Optional white backdrop/candles when the consolidation condition is true (balance + low ADX). Breakout VFX (optional): With strong DI/ADX and Bollinger breaks, renders a subtle “fire” flare above upper-band thrusts or “ice” shelf below lower-band thrusts. Inputs (high-level) Visual Style: Oscillator or ADX. General (Oscillator): Lookback Period, Short/Long Smoothing, Standard Deviation Multiplier. Color (Oscillator): Oversold/Overbought colors for gradient endpoints. Plot (Oscillator): Show Candles, Show Slow MA Line, Show Individual Component (RSI/MACD/BB/Stoch/ATR). Table (Oscillator): Show Information Table & position (compact dashboard of component values + status). ADX / Gaps / VFX (both modes): ADX High Threshold, Highlight Backgrounds, Show Gap Labels, Visual Overlay Effects, and color choices for current-TF & HTF lines. HTF selection: Automatic ladder (3 tiers) based on your chart timeframe. Alerts (built-in) Buy Signal – Primary: Oscillator exits oversold. Sell Signal – Primary: Oscillator exits overbought. Gap Fill Line Created (Any TF) Gap Fill Line Terminated (Any TF) ADX Crossed ABOVE/BELOW Low Threshold ADX Crossed ABOVE/BELOW High Threshold Consolidation Started Alerts evaluate on the close of the relevant timeframe. How to read it (quick guide) Pick your lens: Oscillator for blended momentum around an adaptive midline; ADX for trend strength and DI skew. Watch extremes & mean re-entries (Oscillator): Approaches to the top/bottom band show persistent momentum; returns toward the midline show normalization. Check regime (ADX): Below Low = low-trend; above High = strong trend, with “fire/ice” bias toward +DI/–DI. Track gap lines: Fresh labels mark new reference levels; lines auto-remove on first interaction. HTF lines add context but finalize only on HTF close. The uniqueness from this indicator comes from multiple areas: 1. A unique multi-timeframe algorithm detects gap fill zones and plots them on the chart. 2. Visual effects for both visual modes were hand crafted to provide a visually stunning and intuitive interface. 3. The algorithm to determine sentiment uses a unique blend of weight and sensitivity adjustment to create a plot with elastic upper and lower bounds based off historical volatility and price action.
Pine Script® indicator
by TheUltimator5
30
[DEM] Other Asset Predicting Indicator Other Asset Predicting Indicator is a cross-asset signal generator that uses technical signals from one market to predict price movements in the current chart's asset, based on the correlation between the two instruments. The indicator allows users to select from a comprehensive list of assets including major indices, sector ETFs, cryptocurrencies, forex pairs, country ETFs, and commodities, then applies one of four technical signal methods (Supertrend, Parabolic SAR, EMA Cross, or MACD Crossover) to generate buy and sell signals from the selected reference asset. A key feature is the built-in correlation analysis that calculates a rolling correlation coefficient between the current asset and the reference asset, displayed in a color-coded table where green indicates positive correlation (above 0.5) and red shows negative correlation (below 0.5). The indicator includes an option to invert signals for negatively correlated assets, making it particularly useful for identifying intermarket relationships and leveraging leading indicators from related markets to anticipate price movements in the current instrument.
Pine Script® indicator
by divacleevq
[DEM] Moving Average Signal (With Backtesting) Moving Average Signal (With Backtesting) is designed to generate buy and sell signals using a highly configurable moving average system with over 20 different moving average types (including EMA, SMA, HMA, ALMA, McGinley, TRAMA, and others) combined with dynamic upper and lower bands based on standard deviation or ATR multipliers. It also includes a comprehensive backtesting framework to evaluate the historical performance of these signals. The indicator overlays directly on the price chart, plotting the moving average with upper and lower bands while coloring bars green when price is above the upper band, red when below the lower band, and purple when between the bands. The strategy generates buy signals when price crosses above the upper band after being below it for one bar but above it for the previous three bars (indicating a breakout after brief consolidation), and sell signals under opposite conditions with the lower band, creating a momentum-based system that filters for sustained moves beyond the moving average envelope while offering extensive customization options and integrated backtesting metrics.
Pine Script® indicator
by divacleevq
[DEM] Momentum Supertrend Signal (With Backtesting) Momentum Supertrend Signal (With Backtesting) is designed to generate buy and sell signals by combining SuperTrend trend analysis with consecutive price momentum patterns and timing filters to identify high-probability entry points with reduced signal frequency. It also includes a comprehensive backtesting framework to evaluate the historical performance of these signals. The indicator overlays directly on the price chart, plotting signals and displaying performance statistics in a table. The strategy generates buy signals when price shows three consecutive closes higher than the previous close while the SuperTrend indicates a bullish trend (direction = -1), with an additional requirement that at least 5 bars have passed since the last buy signal, while sell signals are triggered when price shows three consecutive lower closes during a SuperTrend bearish trend (direction = 1) with the same 5-bar spacing requirement, creating a momentum-confirmation system that filters for sustained directional movement while preventing excessive signal generation through integrated timing controls and backtesting analysis.
Pine Script® indicator
by divacleevq
[DEM] MLR Signal (With Backtesting) MLR Signal (With Backtesting) is designed to generate buy signals using a machine learning regression model that analyzes multiple technical indicators from a reference symbol (default NDX) to predict market direction and identify optimal entry points. It also includes a comprehensive backtesting framework to evaluate the historical performance of these signals. The indicator overlays directly on the price chart, plotting signals and displaying performance statistics in a table while coloring bars green for bullish predictions and red for bearish predictions. The MLR model processes ten input features including RSI, MACD components, moving average relationships, and price momentum changes, applying predetermined coefficients to generate a prediction score that determines market bias, with buy signals triggered only when specific sequential patterns of bullish predictions occur (requiring particular arrangements of consecutive bullish and bearish predictions over recent bars) to filter for higher-confidence entry opportunities while tracking signal accuracy and returns through integrated backtesting.
Pine Script® indicator
by divacleevq
[DEM] Correlation Dashboard Correlation Dashboard is designed to display real-time correlation analysis between the current chart's asset and five major market instruments (Bitcoin, Dow Jones 30, Dollar Index, Nasdaq 100, and S&P 500) in an easy-to-read table format overlaid on the price chart. The indicator calculates correlation coefficients over a configurable period (default 20 bars) and applies additional smoothing using a 200-period RMA to filter out noise and identify persistent correlation trends. The dashboard categorizes correlations into five levels ranging from "Very Strong Positive/Negative Correlation" (above ±0.5) to "No Strong Correlation" (between ±0.3), with color-coded text displaying green for positive correlations, red for negative correlations, and white for neutral relationships, enabling traders to quickly assess how their asset moves relative to major market benchmarks and identify potential diversification opportunities or risk concentrations.
Pine Script® indicator
by divacleevq
[DEM] Correlation Coefficient Correlation Coefficient is designed to calculate and visualize the statistical correlation between the current chart's price movement and another selected symbol (defaulting to SPX) over a specified period. The indicator displays the correlation coefficient as both a colored area chart and line plot in a separate pane below the main chart, with colors dynamically changing from red (negative correlation) through purple (no correlation) to green (positive correlation) based on the strength and direction of the relationship. The correlation values range from -1 (perfect negative correlation) to +1 (perfect positive correlation), with horizontal reference lines at these extremes and zero, helping traders understand how closely their asset moves in relation to the selected benchmark symbol and identify periods of divergence or convergence in market behavior.
Pine Script® indicator
by divacleevq
Stockraft Trade Checklist📌 Stockraft Checklist — TradingView Indicator The Stockraft Checklist is a simple but powerful trading companion designed to keep your trading process disciplined and consistent. ✅ Key Features: Create up to 5 custom trading rules (editable text). Mark each rule with a checkbox (✅ or ❌) before taking a trade. If a rule name is left empty, it is automatically hidden from the checklist. Displays an easy-to-read Trade Score (%) at the bottom, based on how many rules are met. Clean and minimal table-style layout on the chart. Customizable appearance: background color, text color, border color, and table position (top-right, top-left, bottom-right, bottom-left). 🎯 Use Case: This indicator doesn’t provide signals — instead, it acts as a visual trading journal on your chart. By ticking off your checklist before each trade, you ensure that you follow your rules consistently and only take high-probability setups.
Pine Script® indicator
by rohitmdk
1
Risk Management Plan (Shares)What it does This indicator displays a compact risk-management panel on the chart (middle-right). It helps you size positions, quantify risk in % and $, estimate shares to buy, and derive suggested stop/target prices from your chosen risk and R/R ratio. It also shows the % move from entry to stop/target and a “Max. Share Price (per system)” threshold derived from your accepted loss and R/R. Why it’s useful Many losses come from oversizing and inconsistent risk. This panel keeps the key numbers in one place—capital exposure, shares, stop/target math, and % distances—so your trade planning remains disciplined and repeatable. Inputs 1. Capital Size ($) 2. Position Size (%) 3. Defined Risk (%) on capital 4. R/R Ratio (R:1) – enter R 5. Entry Price ($) (optional; if 0, the script uses close Calculations (key formulas) 1. Position Size ($) = Capital × Position Size (%) 2. Shares to Buy = floor(Position Size ($) ÷ Entry Price) 3. Defined Risk ($) = Capital × Defined Risk (%) 4. Suggested Stop Price = (Position Size ($) − Defined Risk ($)) ÷ Shares 5. Suggested Target Price = (Position Size ($) + Defined Risk ($) × R) ÷ Shares 6. Entry → Stop (%) = (Entry − Stop) ÷ Entry × 100 (displayed negative) 7. Entry → Target (%) = (Target − Entry) ÷ Entry × 100 8. Max. Share Price (per system) = Position Size ($) × R ÷ |Defined Risk ($)| How to use 1. Set Capital Size, Position Size (%), Defined Risk (%), and R/R. 2. Optionally set Entry Price (otherwise the script uses the chart’s close). 3. Read the panel: entry (blue), stop values (red), target values (green), risk (%) and ($) displayed negative for clarity. 4. Use Max. Share Price (per system) as a quick threshold check under your risk assumptions. Note: If the Suggested Target or Suggested Stop is not aligned with your trading plan, adjust Position Size (%), R/R Ratio, and/or Defined Risk (%). The panel will update the levels accordingly so you can match your plan. Notes & limitations * Indicator only (no signals or strategy backtest). * No lookahead/repainting; values depend on user inputs and current chart data. * Educational use only; trading involves risk. Consider fees, slippage, and market conditions. Version: v1.0 – Initial release (Pine Script v6)
Pine Script® indicator
by Yesid_Correa_Cano
Funding Rate Aggregated (Lite)Funding Rate Aggregated (Lite) provides traders with a consolidated view of perpetual futures funding rates across multiple major exchanges. Instead of monitoring each market individually, the script aggregates the available data into a single, average funding rate series—streamlining analysis and helping identify market-wide positioning imbalances. The indicator supports Binance, Bybit, OKX, Bitget, and Coinbase, with user-controlled toggles to enable or disable specific venues. For exchanges offering multiple quote currencies (e.g., USDT, USD, or USDC pairs) inclusion is based on whether their trading activity (volume) is relevant (determined manually, not via code). Each available rate is checked and included in the calculation only if valid, ensuring the average reflects actual market conditions. From a technical standpoint, the script: Retrieves real-time funding rate data directly via request.security for the current symbol’s base currency. Applies standard formatting similar to TradingView's official indicator. Visualizes the average funding rate with color-coded plotting (green for positive, red for negative), alongside a neutral zero reference line. Why it is useful: Funding rates are a direct measure of long/short market bias in perpetual swaps. Persistently high positive rates often indicate overcrowded longs, while negative rates can reveal excessive shorting. By combining multiple exchanges into one metric, traders gain a more robust signal, reducing noise from isolated exchange-specific anomalies. This aggregated perspective can assist in timing contrarian trades, spotting funding-driven inefficiencies, and gauging overall market sentiment. Applications in trading include: Sentiment analysis: Assess whether perpetual futures traders are leaning heavily long or short. Cross-exchange confirmation: Ensure that extreme funding isn’t confined to a single venue. Risk management: Identify periods of elevated funding costs that may erode profitability in longer-term positions. Strategy filters: Integrate the aggregated rate as a condition for entries/exits, or to adjust position sizing during extremes. The Lite designation emphasizes simplicity and efficiency: the indicator avoids unnecessary visual and data-driven clutter and focuses on delivering one clear, aggregated signal that can be adapted to a wide range of trading styles.
Pine Script® indicator
by mxdvt07
2
RSI + ARBR 组合指标The RSI + ARBR indicator mainly harmonizes the values of the two indicators, enabling investors to exit at market tops or buy at market bottoms when market sentiment surges or collapses. ### 补充说明： - **RSI**：全称为Relative Strength Index（相对强弱指数），是常用的技术分析指标，用于衡量市场多空双方力量的对比。 - **ARBR**：由AR（Activity Ratio，人气指标）和BR（Buying Ratio，意愿指标）两个子指标组成，主要反映市场交易的活跃程度和投资者的买卖意愿。 - 句中“逃顶”译为“exit at market tops”，“抄底”译为“buy at market bottoms”，均为金融领域常用表达，准确对应“在高位卖出规避风险”和“在低位买入等待上涨”的操作含义。
Pine Script® indicator
by nygztuz
Futures Forward Price [NeoButane]In futures markets, the theoretical value of a futures contract can be derived from its underlying price and cost of carry. By baking in the costs and potential yields, the theoretical forward price then be used in basis against futures prices in place of the underlying spot price. Usage The script creates plots on the main chart and a separate window pane. Both are meant to be used to visualize dislocations in the market. By using a futures vs. forward basis instead of futures vs. spot basis, discounts in the market are clearer. Last month, the gold futures market GCZ2025 traded >1% above forward price when tariffs were announced and fell back in line once the tariffs were verbally retracted. View roll spreads over a back-adjusted continuous chart. I guess. I don't think spread traders only look at one chart. This is as educational for me as it is you. Configuration The underlying reference needs to be changed to match the futures contract you are using. The Risk-Free Rate defaults to FRED:SOFR. I found the contract month matched 3-Month SOFR Futures to be the closest for forward price. Risk-Free Rate: The interest rate source for forward price. Constant Risk-Free Rate: a static interest rate that can be used in advance of future changes in risk-free rate. Underlying Reference: spot or index price. Some examples include TVC:SPX, TVC:GOLD, CRYPTO:BTCUSD, TVC:USOIL. Forward Price Compounding: determines which formula to use. They're similar and become closer as the contract matures. Alternative Contract: enable and select a futures contract to use it on a chart different than the main. Storage Cost and Yield: for use with commodities. I haven't found a proper use for them yet but enabling is simple if you are able to. The following are meant to be used with the continuous formula as they are compounded. However the rate sources don't differ much for the purpose of futures prices. 3-Month CME SOFR Futures 3-Month ICEEUR SONIA Futures 3-Month Osaka TONA Futures The other rate sources are either meant for futures contracts shorter than quarterly such as monthly crypto futures or were meant to help myself understand how different rates would align with futures prices, like inflation. What this script does It uses the cost of carry formula to output the forward price (red line). The underlying reference (green line) is plotted alongside and a futures-derived reference (blue line) can be displayed to see how it looks next to the real reference price. The data pane displays either the nominal difference or percentage difference between the real futures price and the calculated forward price. Further reading www.investopedia.com www.cmegroup.com www.oxfordenergy.org www-2.rotman.utoronto.ca www.cmegroup.com 3-month rate futures www.cmegroup.com www.ice.com www.bankofengland.co.uk www.jpx.co.jp
Pine Script® indicator
by NeoButane
1
Reverse RSI [R] – Predictive RSI Price LevelsReverse RSI – Predictive RSI Price Levels Description This indicator is a modified and enhanced version of the original "Reverse RSI" by Franklin Moormann (cheatcountry), published under the MIT License. It estimates the price levels at which the RSI would reach specific thresholds, typically RSI = 30 (oversold) and RSI = 70 (overbought), based on current market conditions. Key Features Calculates price levels corresponding to RSI = 30 and RSI = 70 Helps forecast potential support and resistance zones based on RSI targets Automatically updates with each new candle Supports custom RSI length and price source (close, hl2, ohlc4, etc.) Designed for traders who want to anticipate momentum extremes before they occur Use Cases Estimate how far the price must move to reach RSI oversold or overbought levels Plan limit entries or exits based on projected RSI thresholds Combine with standard RSI or other indicators for confirmation and analysis Credits This script is based on the original "Reverse RSI" by Franklin Moormann (cheatcountry) and released under the MIT License. Modified and maintained by bitcoinrb.
Pine Script® indicator
by BitcoinRB
Range Stats with Sweeps + Time Analysis + BiasRange Stats with Sweeps + Time Analysis + Bias Advanced range-based trading analysis with comprehensive sweep detection, time-based probability modeling, and intelligent bias calculation for institutional-grade market insights. Overview Range Stats with Sweeps + Time Analysis + Bias is a sophisticated Pine Script indicator designed for professional traders who demand precision in range-based market analysis. This comprehensive tool combines traditional range level analysis with advanced sweep detection algorithms, time-based probability modeling, and dynamic bias calculation to provide institutional-quality insights into market behavior patterns. Core Features Multi-Timeframe Range Analysis Automatic or manual timeframe selection with intelligent defaults Comprehensive range level calculation including High, Low, Open, 75%, EQ (50%), and 25% retracements Dynamic period detection supporting both traditional timeframes and custom session-based analysis Real-time range updates with historical data preservation Advanced Sweep Detection System Configurable sweep validation with customizable bar confirmation periods Optional wick-based sweep requirements for enhanced precision Segment-based sweep tracking dividing periods into three analytical zones Real-time sweep markers with probability-enhanced labeling Comprehensive Bias Calculation Framework Intelligent range bias determination based on price action relative to range boundaries Dynamic bias tracking with bullish, bearish, and neutral state identification Historical bias performance statistics with hit rate analysis Optimal Trade Entry (OTE) box generation based on current bias and displacement analysis Time-Based Probability Analysis Formation time tracking for high and low levels with customizable time buckets Sweep probability calculation based on exact formation timing Multiple time range displays including Full 24H, Extended Trading, US Market, EU Market, and Asia Market sessions Custom session configuration with intelligent session-based level detection Professional Visualization System Customizable line styles, colors, and transparency settings for all range levels Segment projection lines for period structure visualization Comprehensive probability tables with real-time statistics Time-enhanced labels showing formation times and sweep probabilities Technical Implementation Range Detection Logic The system employs sophisticated algorithms to identify range boundaries using either traditional timeframe-based detection or custom session-based analysis. Range levels are calculated with mathematical precision, providing 75%, 50%, and 25% retracement levels based on period high-low ranges. Sweep Analysis Framework Advanced sweep detection monitors price action for liquidity grabs above highs and below lows, with configurable validation periods ensuring sweep authenticity. The system tracks sweep occurrences across three distinct period segments, enabling granular probability analysis. Bias Calculation Engine The intelligent bias system analyzes price behavior relative to range boundaries, considering factors such as wick interactions, close positioning, and directional momentum. This generates dynamic bias signals that adapt to changing market conditions. Time-Based Modeling Sophisticated time bucket analysis tracks formation times for range extremes, building comprehensive probability models that identify optimal trading windows based on historical performance patterns. Configuration Options Core Settings Automatic or manual timeframe selection with comprehensive options Global timezone support with major market timezone presets Configurable label sizing and time format preferences Advanced sweep validation parameters with wick-based options Range Level Customization Individual control over all range level displays and styling Custom color schemes with transparency controls Line style selection including solid, dashed, and dotted options Adjustable line widths for enhanced visual hierarchy Advanced Features Segment projection line configuration for period structure analysis Bias calculation toggle with OTE box generation Sweep extreme probability tracking with period extreme analysis Comprehensive sweep marker system with probability labeling Time Analysis Configuration Multiple time bucket options including 20-minute, 1-hour, 2-hour, and custom session buckets Flexible time range displays optimized for different trading sessions Custom session configuration with intelligent session-based level detection Advanced table positioning and sizing options Trading Applications Range-Based Strategy Development Identify key support and resistance levels within established ranges, analyze retracement probabilities for optimal entry timing, and utilize segment-based analysis for precise trade planning. Sweep-Based Trading Monitor liquidity grab events with high-probability retracement targets, track sweep occurrences across different period segments, and leverage time-based sweep probability for enhanced timing. Bias-Driven Analysis Utilize dynamic bias calculation for directional trade alignment, implement OTE box strategies for institutional-style entries, and monitor bias shifts for trend change identification. Time-Based Optimization Optimize trade timing using formation time probability analysis, focus on high-probability time windows for specific market behaviors, and customize analysis for preferred trading sessions. Technical Specifications Built on Pine Script v6 with advanced optimization techniques Comprehensive data collection with intelligent memory management Real-time probability calculation with historical data preservation Multi-session support with custom timezone handling Professional-grade visualization with institutional styling Important Considerations This indicator is designed for experienced traders familiar with range-based analysis and institutional trading concepts. Optimal performance requires adequate historical data for probability calculation accuracy. Users should ensure proper timeframe and session configuration alignment with their trading strategy. Disclaimer This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or trading signals. All trading decisions should be based on your own analysis, risk tolerance, and financial situation. Past performance does not guarantee future results. Trading involves substantial risk of loss and is not suitable for all investors. The probability statistics and bias calculations are based on historical data and may not predict future market behavior. Always conduct thorough research and consider consulting with qualified financial professionals before making trading decisions. Copyright © 2025 OmarxQQQ. All rights reserved. This Pine Script indicator and its associated documentation are protected by copyright law. Unauthorized reproduction, distribution, or modification is prohibited. This code is subject to the terms of the Mozilla Public License 2.0. Range Stats with Sweeps + Time Analysis + Bias - Professional range analysis with institutional-grade probability modeling.
Pine Script® indicator
by Omarqqq
Time Clusters {X}Time Clusters - Dynamic Session Bias Analysis Professional time-based session analysis with intelligent bias detection and real-time visual feedback. Overview Time Clusters is a sophisticated Pine Script indicator engineered for precision session-based market analysis. It creates visual time zones at user-defined session periods and dynamically tracks price bias evolution using institutional-grade detection logic. The tool empowers traders to identify critical time periods and monitor market sentiment transitions with professional-grade accuracy. Core Features Multi-Session Time Analysis Six fully customizable time cluster configurations Comprehensive global timezone support with automatic DST handling Individual session control with unlimited or restricted display options Precision 1-minute session detection for maximum accuracy Dynamic Bias Detection System Real-time bullish/bearish sentiment identification based on breakout patterns Instant color transitions reflecting market bias shifts Professional inversion logic adapted from institutional trading methods Comprehensive color customization with separate transparency controls Advanced Visual Framework Custom border styling with dotted highs/lows and solid connection lines Clear visual hierarchy distinguishing historical from dynamic zones Configurable line styles and adjustable border thickness Open left-side design for clean professional appearance Intelligent Session Management Smart cutoff handling preventing premature midnight session termination Next-day extension logic for overnight session continuity Flexible timing controls respecting user-defined cutoff parameters Technical Implementation Session Creation Process Time zones generate at specified session intervals using high-precision 1-minute data, establishing clear high/low boundaries from session opening candles with dynamic extension until session completion or cutoff activation. Bias Analysis Framework The system monitors full-body closes above/below established ranges, determines initial sentiment direction from breakout patterns, detects bias inversions when price returns to range and breaks opposite boundaries, then updates visualizations from exact inversion points forward. Visual Feedback Architecture Historical zones maintain original session colors while dynamic zones reflect current market bias, creating split visualization that clearly distinguishes between past and present market sentiment. Configuration Options Core Settings Session drawing limits and timeframe restrictions Global timezone selection with daylight saving awareness Label sizing, positioning, and text color controls Independent transparency settings for boxes and text elements Bias Detection Controls Toggle automatic bias detection functionality Custom color selection for bullish, bearish, and neutral states Separate transparency controls for auto-coloring mode Signal preference selection between close and wick-based analysis Visual Customization Individual border styling for top, bottom, and right edges Line style selection with solid, dotted, or dashed options Border width adjustment from 1-5 pixel thickness Professional visual hierarchy configuration Trading Applications Session-Based Strategy Development Analyze opening range dynamics during key session periods, identify recurring time-based behavioral patterns, and coordinate multiple session monitoring for comprehensive market coverage. Sentiment Analysis Visualize real-time market bias transitions, validate directional movements with time-based context, and understand price interaction dynamics with established session boundaries. Strategic Market Planning Optimize position entry timing around critical session periods, utilize session boundaries for logical stop placement, and develop comprehensive intraday market structure understanding. Technical Specifications Built on Pine Script v6 with latest optimization features High-precision 1-minute data integration for accurate session detection Efficient memory management with intelligent cleanup protocols Multi-timeframe compatibility optimized for sub-hourly analysis Real-time processing with live bias detection and visual updates Important Considerations This indicator focuses specifically on time-based session analysis with dynamic bias detection rather than traditional gap identification. Optimal performance occurs on timeframes below one hour. Users must ensure session times align with their trading timezone for accurate analysis. Disclaimer This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or trading signals. All trading decisions should be based on your own analysis, risk tolerance, and financial situation. Past performance does not guarantee future results. Trading involves substantial risk of loss and is not suitable for all investors. Always conduct thorough research and consider consulting with qualified financial professionals before making trading decisions. Copyright © 2024 omarxqqq. All rights reserved. This Pine Script indicator and its associated documentation are protected by copyright law. Unauthorized reproduction, distribution, or modification is prohibited.
Pine Script® indicator
by Omarqqq
CVD Spaghetti - Multi-Exchange (Perpetuals)CVD Spaghetti – Multi-Exchange (Perpetuals) is designed to track and visualize Cumulative Volume Delta (CVD) across multiple cryptocurrency perpetual futures exchanges in one consolidated view. This indicator provides traders with a clearer perspective on buying and selling pressure by monitoring how order flow develops on different venues simultaneously. What it does The script calculates the CVD for each enabled exchange and plots them as separate lines on a single chart, creating a “spaghetti” style visualization. This allows traders to identify relative strength or weakness between major exchanges, which can often hint at institutional positioning, liquidity shifts, and potential market imbalances. Why it’s useful Order flow and liquidity dynamics can differ significantly between exchanges. By aggregating and comparing these flows, traders can: Detect which venue is leading during trend development. Spot divergences between exchanges, which may indicate inefficiencies or arbitrage-driven movements. Gauge overall sentiment strength by comparing multiple sources instead of relying on a single dataset. Technical details Anchor Period Reset: The cumulative calculation resets based on the user-defined Anchor Period (default: daily), keeping data relevant for the chosen trading horizon. Dynamic Resolution: The script automatically selects an appropriate lower timeframe for data requests based on the chart timeframe to maintain responsiveness and accuracy. Normalization: Not all exchanges report volume in the same way—some use quote currency (USD), others in contracts or ticks. To ensure comparability, this indicator normalizes volumes where necessary: Bybit USD and OKX contracts are divided by price to approximate base-coin terms. Single-contract venues (e.g., Deribit) are normalized similarly. Exchanges already reporting in the base currency remain unchanged. Multi-Exchange Coverage: Supports major venues including Binance, Bybit, OKX, Bitget, Coinbase, and optional secondary exchanges like Blofin, Whitebit, and Deribit. Visual Aids: Zero baseline for directional reference. Vertical session markers at each reset point. Optional exchange labels positioned dynamically on the last bar for quick identification. How traders might use it Trend confirmation: Strong synchronized CVD across all major exchanges supports continuation; fragmentation may suggest weakening conviction. Cross-exchange divergence: When one exchange’s CVD diverges from others, it can signal localized liquidity shocks or large player activity. High-frequency strategies: On lower timeframes, the spaghetti view can highlight which venue is absorbing or providing liquidity fastest, aiding short-term decision-making.
Pine Script® indicator
by mxdvt07
1
SVX (Sentiment Velocity Index) EMA & Slope StructureThe SVX Momentum Framework is designed as a momentum and slope visualization tool. Designed to identify momentum shifts and pre-move conditions within price action. What it draws: - Plots five EMAs (8, 20, 40, 100, 200) To visualize short/medium trend structure. You can pick which ones to see. - Calculates an EMA-based slope (rate of change) from actual closing-price movement and colors a neutral/positive/negative background for context. This is not ATR or Supertrend. - Shows optional triangle context markers on bars that meet wick/body conditions that often precede momentum transitions (off by default / user-controlled). - Shows Reference close (optional): Use when you need to verify price relative to standard closes for easier zone and level marking. How the components work together: - The EMA stack provides directional alignment (compression/expansion and relative order of 8/20/40/100/200). - The slope quantifies whether recent movement is neutral, building (Green), or fading (Red); the background simply reflects that state. - The triangle context markers flag a bar-shape condition (wick/body relationship) that can precede changes in behavior. - The reference close is a visual aid for clarity when users compare candle closes and trading zones or levels . How to read it: - Structure: Look for EMA ordering (at least 8/20/100 recommended) and spacing to understand the underlying bias and compression/expansion. - Slope state: Neutral (no bias, white), positive (building, green), or negative (fading, red). Use it as context, not as entries/exits. - Context markers (optional): Treat them as visual highlights. - Reference close (optional): Use when you need to verify price relative to candle close for easier zone and level marking. How to use it (general guidance): - Read structure first (EMA order/spread), then consider the slope state to understand whether conditions are neutral or possibly momentum-driven in the indicated direction. - Combine with your own entry rules and/or engulfing candle patterns for timing, risk, and apply your preferred management. What’s original here: - The slope visualization is derived from actual closing-price movement, not Supertrend or ATR overlays. - The wick/body context markers focus on bars that often precede transitions, presented as optional visuals. - The reference close overlay is included purely to aid interpretation when comparing views to the native close and for more clear zone and level marking. Access & intent: - Educational visualization of structure and slope, providing a framework traders can build upon. - The author does not provide financial advice. Use at your own discretion. Disclaimer This script is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to trade. Past performance is not indicative of future results. The author assumes no responsibility for losses incurred from the use of this tool. TradingView, Inc. has no liability related to this script or its use.
Pine Script® indicator
by One_To_Two_Trades
Full Candle Higher/Lower (No Repeats)🔎 What the Script Does (Pine Script v6) Keeps track of the last signal Uses a persistent variable lastSignal (initialized once as "none"). Ensures that if a signal repeats consecutively, it won’t be triggered again. Defines the conditions for a “Higher” or “Lower” candle sequence Higher condition: Current close > previous high, AND previous low ≤ the high of two bars ago. → This means the candle has fully broken higher. Lower condition: Current close < previous low, AND previous high ≥ the low of two bars ago. → This means the candle has fully broken lower. Checks for new signals only If a candle meets the condition and the last signal wasn’t the same, a new signal is triggered. Updates lastSignal to prevent repeats. Plots labels/arrows A “Higher” signal shows a green label below the bar. A “Lower” signal shows a red label above the bar. Sets alerts So you can be notified in TradingView whenever a “Higher” or “Lower” flag is detected. 📊 Trading Logic in Words The indicator is looking for full candle breakouts. If a candle closes above the previous high (with some confirmation from older bars), it flags it as a “Higher” signal. If a candle closes below the previous low (with similar confirmation), it flags it as a “Lower” signal. It avoids duplicate consecutive signals by remembering what the last one was. ✅ Why It’s Useful Helps traders spot momentum continuation candles (strong push candles). Reduces noise by not repeating the same signal multiple times in a row. Works like a breakout detector that tells you when the market is making a new leg up or new leg down.
Pine Script® indicator
by devtiqo
Crypto OI AgregatedCrypto OI Aggregated — Open Interest Aggregator for Crypto Exchanges General Description The indicator is designed for comprehensive analysis of Open Interest (OI) across major cryptocurrency exchanges. It consolidates data from multiple platforms, visualizes it as candlestick charts or deltas, and builds tables with breakdowns by exchange and contract type. This allows traders to quickly understand where market interest is concentrated and how the market structure is shifting. Unlike standard tools that only show data from a single exchange, this indicator provides a full market overview and makes it easy to compare dynamics across different platforms. ⸻ Key Features • Aggregation of OI data from exchanges: Binance, Bybit, OKX, Bitget, Kraken, HTX, Deribit (feel free to leave a comment if you’d like me to add other exchanges that provide open interest data) • Support for contract types: USDT.P, USD.P, USDC.P, USD.PM • Automatic normalization of various OI data formats from different providers • Display modes: • OI candlestick chart (total aggregated OI) • OI Delta (change in OI per bar) • Full table with detailed data by exchange and contract type • Short summary table with totals in USD and base assets • Support for USD or COIN denomination • Convenient formatting for large numbers • Customizable colors ⸻ How to Use the Indicator 1. Select Exchanges In the settings, enable or disable specific exchanges. It is recommended to activate only the ones you need for analysis — this will make the indicator faster. 2. Choose Data Type • OI — aggregated open interest from selected exchanges. • OI delta — delta (change in OI compared to the previous bar). 3. Denomination • USD — values are converted into USD equivalents. • COIN — values are shown in the base asset (BTC, ETH, etc.). 4. Reading the Chart • OI candlesticks show the overall OI dynamics. • Delta histogram highlights how much OI has grown or decreased per bar. • Colors are fully customizable. 5. Tables • Enabled via the Show table option. • Full Table → Rows = exchanges, Columns = contract types. Cells contain OI values in either USD or the base asset, depending on settings. Quickly shows where the main interest is concentrated. • Short Table → Displays only the total OI values in USD and the base asset. ⸻ Important Notes • For better readability of large values, two custom formatting functions were implemented. They work similarly to format.volume, but with improved digit grouping and adjustable decimal precision. In the tables, the top row is formatted using format.volume, while the bottom row uses the improved formatting functions for clearer representation. str(d, n, s) => str.substring(d, 0, str.length(d) - n) + '.' + str.substring(d, str.length(d) - n, str.length(d) - (n - 2)) + s format(_r) => d = str.tostring(math.round(_r)) str.length(d) > 9 ? str(d, 9, " B") : str.length(d) > 6 ? str(d, 6, " M") : str.length(d) > 3 ? str(d, 3, " K") : d ⸻ Conclusion: Crypto OI Aggregated is a convenient and powerful tool for cryptocurrency derivatives traders. It enables tracking of OI dynamics across multiple exchanges simultaneously, detecting imbalances between contracts, and identifying signals that are not visible when analyzing a single exchange.
Pine Script® indicator
by NoveltyTrade
4