Combined: Strat Dashboard + FVG + M&E StarsSTRAT MIX + VECTOR + SUPPORT
In financial markets, support and resistance are fundamental concepts in technical analysis used to identify price levels where an asset's price tends to pause or reverse. They are essentially areas on a chart where buying or selling pressure is expected to be strong enough to temporarily halt or reverse the prevailing price trend.
Here's a breakdown:
* Support: This is a price level where an asset's downward movement is expected to stop due to increased buying interest. Think of it as a "floor" where demand is strong enough to prevent the price from falling further. When the price approaches a support level, buyers tend to step in, leading to a potential bounce or reversal upwards. The more times a price level has held as support in the past, the stronger it's generally considered.
* Resistance: This is a price level where an asset's upward movement is expected to stop due to increased selling interest. It acts like a "ceiling" where supply is strong enough to prevent the price from rising higher. When the price approaches a resistance level, sellers tend to step in, leading to a potential pullback or reversal downwards. Similar to support, the more times a price level has acted as resistance, the more significant it's often seen.
Key characteristics:
* Supply and Demand: Support and resistance levels are a reflection of the continuous interplay between supply (sellers) and demand (buyers) in the market.
* Dynamic Nature: These levels are not fixed lines but rather zones. They can also "flip roles"; if a resistance level is broken and the price moves above it, that former resistance can then become a new support level, and vice-versa.
* Psychological Importance: These levels often derive their strength from collective market psychology, as many traders and investors recognize and react to the same price points.
Support and Resistance
Candle Ghosts: MTF 3 Candle Viewer by Chaitu50cCandle Ghosts: MTF 3 Candle Viewer helps you see candles from other timeframes directly on your chart. It shows the last 3 candles from a selected timeframe as semi-transparent boxes, so you can compare different timeframes without switching charts.
You can choose to view candles from 30-minute, 1-hour, 4-hour, daily, or weekly timeframes. The candles are drawn with their full open, high, low, and close values, including the wicks, so you get a clear view of their actual shape and size.
The indicator lets you adjust the position of the candles using horizontal and vertical offset settings. You can also control the spacing between the candles for better visibility.
An optional EMA (Exponential Moving Average) from the selected timeframe is also included to help you understand the overall trend direction.
This tool is useful for:
Intraday traders who want to see higher timeframe candles for better decisions
Swing traders checking lower timeframe setups
Anyone doing top-down analysis using multiple timeframes on a single chart
This is a simple and visual way to study how candles from different timeframes behave together in one place.
Std.dev [AY¹]İşte TradingView için uygun açıklama metni:
Std.dev - Extended Range Deviation Indicator
This indicator calculates and displays standard deviation levels based on a custom session's high and low range, with lines extending until the next session start.
Key Features:
Custom Session Definition: Set your preferred session time (default: 09:00-11:30)
Extended Lines: Deviation lines extend from session end until next day's session start (09:00)
Flexible Deviation Types: Choose between full deviations (1.0, 2.0, 3.0...) or half deviations (0.5, 1.0, 1.5, 2.0...)
Visual Differentiation: Half deviation levels are displayed with dashed lines for easy identification
Anchor Point Options: Calculate deviations based on wicks or candle bodies
Session Visualization: Optional session range boxes and vertical start/end lines
Equilibrium Line: Optional mid-point line between session high and low
How it Works:
Identifies the specified session period each day
Captures the highest and lowest prices during that session
Calculates the range (high - low)
Draws multiple deviation levels above and below the range
Extends all levels until the next session begins
Use Cases:
Support and resistance level identification
Price target projections
Range-based trading strategies
Market structure analysis
Settings:
Session time configuration
Number of deviation levels (1-10)
Line styles and colors
Show/hide session boxes and labels
Customizable anchor points (wicks vs bodies)
The indicator preserves historical levels, allowing traders to analyze multiple sessions simultaneously for comprehensive market structure analysis.
Rejection Zones MODHigh probability "Institutional footprint" zones with some extras.
Zones settings
-Mitigation method: You can set whether the wick or the body mitigates the zones.
-Show last X Rejection Zones: The number of displayed zones
+
Optional ATR and Engulfing filter.
Fractals settings
-Filter 3/5 bar fractal: Choose to display the fractal candle from 3 or 5 candles pattern.
Moving Average settings
-Selectable MA with adjustable length, type and timeframe.
Liquidity Sweeps settings
-Selectable pivot length
Dashed line for swept levels, solid line for still active liquidity levels.
Bar colors
-Yellow: Engulfing candle
-Lime: Bullish momentum candle
-Purple: Bearish momentum candle
Professor-AI FUTURE TRADING[Cryptovarthagam]📌 TradingView Publication Description
Title: Professor-AI | Breakout Strategy Planner with Confirmation Filters
Overview
Professor-AI is an advanced breakout trading indicator designed to assist discretionary and semi-automated traders with structured trade planning. This tool does not provide guaranteed signals or financial advice but helps traders define entries, exits, and risk with clarity and consistency.
Key Features
1. Breakout Strategy Detection
Automatically identifies potential breakout opportunities using user-defined logic.
-Supports dynamic calculation between highest high/lowest low and pivot-based structures.
2. Volume & Momentum Filters
Filters trades based on volume confirmation and customisable momentum conditions.
-Avoids low-conviction breakouts by requiring stronger participation.
3. Rejection Candle Filter
Detects and filters out trades that show signs of candle rejections or wick traps.
-Optional control for wick-to-body ratio thresholds.
4. Smart Trade Setup Planning
Auto-generates suggested Entry, Stop Loss, TP1, and TP2 levels using ATR and user-defined multipliers.
-Customisable Min Profit % and Max Loss % filters to block low-quality setups.
5. Signal Confirmation Options
Allows traders to require candle close confirmation before triggering trade setups.
-Toggle-based control for signal strictness.
6. Trade Result Tracking
Actively monitors whether TP1, TP2, or SL is hit — and logs the result.
-Calculates gain/loss % and dollar value using the provided capital and leverage inputs.
7. Profit/Loss Calculator
Estimates position sizing and potential outcomes based on user capital and risk multiplier.
-Not linked to real trades — intended for planning and journaling.
8. Market Trend Analyzer
-Built-in trend detection using EMA crossover, ADX strength, and pivot structure.
Highlights uptrend, downtrend, or sideways zones on the chart (optional).
Customizable Settings
- SL Multiplier (ATR-based)
- TP1 & TP2 Multipliers
- Risk Filters:
Minimum TP1 Profit % Filter
Maximum SL % Filter
Wick Rejection Filter (Enable/Disable)
RSI Filter (Enable/Disable)
- Signal Confirmation (Candle Close)
- Switch Between Pivot/High-Low Calculation
- Profit Calculation Inputs (Capital & Leverage)
Intended Use
This script is designed for educational and planning purposes only. It is best suited for traders who:
Prefer rule-based, structured entries
Use visual confirmation alongside trade planning
Track trade performance over time
This tool does not execute trades, nor does it replace professional advice or financial strategy.
Compliance Notice
This script complies with TradingView’s House Rules:
It does not promise profitability or guaranteed returns.
It does not promote financial products or services.
It provides clear, transparent calculations for user-configured trade setups.
It is fully educational, designed for those who want to build discipline through structured trade planning.
Iambuoyant High Win Rate TraderIambuoyant High Win Rate Trader (Debug Signals) - Indicator Description
Introduction
The "Iambuoyant High Win Rate Trader" is a comprehensive Pine Script indicator designed to identify high-probability trading opportunities across various market conditions. Built with a multi-faceted approach, it integrates several key technical analysis concepts to provide robust buy and sell signals, aiming to maximize potential returns while managing risk. This indicator is particularly useful for traders looking for confirmed entries based on a confluence of factors rather than relying on a single signal.
Strategies Used
This indicator employs a sophisticated combination of strategies, each contributing to a stronger signal when aligned:
Trend Analysis:
Multiple EMAs: It utilizes three Exponential Moving Averages (EMAs) – a fast, slow, and a longer-term trend EMA – to establish the prevailing market direction. Signals are filtered to align with this identified trend, enhancing their probability of success.
Trend Alignment: Confirms that price action is consistent with the established EMA trend, ensuring trades are taken in the direction of momentum.
Oscillator Confirmation:
Relative Strength Index (RSI): Employs RSI to identify overbought and oversold conditions, with a specific focus on the RSI turning away from extreme levels, suggesting a potential reversal or continuation point.
Stochastic Oscillator: Similar to RSI, the Stochastic Oscillator is used to pinpoint overbought and oversold zones, with additional confirmation from the %K and %D lines crossing or turning.
Momentum and Divergence (MACD):
Moving Average Convergence Divergence (MACD): The indicator analyzes MACD line and signal line crossovers, alongside histogram movement, to gauge momentum shifts and potential trade entries.
Volume Analysis:
Volume Confirmation: Integrates volume analysis by comparing current volume to a Volume Moving Average. Higher-than-average volume during a signal can confirm conviction behind the price move.
Market Structure and Volatility:
Support and Resistance (S/R) Levels: Dynamic support and resistance levels are identified using pivot points. These levels are used to inform potential stop-loss placements and to ensure trades aren't initiated directly into strong opposing S/R zones.
Average True Range (ATR): ATR is used to measure market volatility, which helps in adjusting trade sizing and stop-loss distances. A volatility filter is included to prevent trades in excessively choppy or illiquid conditions.
Risk Management:
Dynamic Stop Loss: The indicator attempts to identify logical stop-loss levels based on recent price action or nearby support/resistance.
Risk:Reward Ratio Filtering: A configurable minimum Risk:Reward ratio ensures that only trades with a favorable potential return relative to the risk are considered, promoting disciplined trading.
Signal Confirmation:
Confirmation Bars: An optional confirmBars input allows for signals to be confirmed over a specified number of bars, reducing false positives by waiting for price action to sustain the initial signal. (Note: For debugging, this is often set to 0 for immediate signals.)
How to Use the Indicator
Add to Chart: Apply the "Iambuoyant High Win Rate Trader (Debug Signals)" indicator to your desired chart in TradingView. It's an overlay indicator, meaning it will plot directly on your price chart.
Understand the Signals:
Buy Signals (Green Triangles/Labels): Appear below the price bars, indicating a potential long entry.
Sell Signals (Red Triangles/Labels): Appear above the price bars, indicating a potential short entry.
"Flash" Signals: Smaller, colored triangles indicate the immediate bar where the signal conditions are first met.
"Confirmed" Signals: Larger, shaded triangles with labels indicate that the signal has passed the confirmBars criteria (if confirmBars is set to greater than 0).
Utilize Debugging Features (Crucial for Optimization):
Access Inputs: Open the indicator's settings by clicking the gear icon next to its name on the chart.
"Signal Components (Debugging)" Section: This is the most powerful feature for tailoring the indicator to your needs.
Initial Setup: When first applying the indicator or if signals are too rare, start by setting most "Enable X Condition" toggles to false, potentially leaving only one or two simple conditions (e.g., "Enable RSI Condition" or "Enable Trend Alignment") as true. This will force signals to appear, allowing you to confirm the plotting mechanism works.
Gradual Re-enabling: Once you see signals, gradually re-enable one "Enable X Condition" at a time.
Observe Debug Plots (Lower Pane): Below your main chart, the indicator plots colored columns (e.g., "Debug: RSI Bull", "Debug: MACD Bear"). These show when each individual component of the long/short signal is true (1 or 2) or false (0 or na). The "Debug: Final Long Signal" and "Debug: Final Short Signal" plots show when the combined signal conditions are met.
Identify Bottlenecks: If signals disappear after enabling a new condition, observe its corresponding debug plot. If it's frequently 0 when other conditions are 1, you've found a bottleneck.
Adjust Parameters: For bottlenecks, go back to the relevant input section (e.g., "Oscillators," "Market Structure," "Signal Quality") and adjust parameters (e.g., rsiOB/rsiOS, stochOB/stochOS, volatilityFilter, minRRRatio) to be less strict until signals appear at your desired frequency. Alternatively, you may decide to leave that specific condition disabled if it's too restrictive for your strategy.
Configure Display Options: Use the "Display" group in the inputs to toggle the visibility of labels, support/resistance lines, and EMA trend lines on your chart.
Set Up Alerts: The indicator includes built-in alert conditions for "Confirmed Buy Signal" and "Confirmed Sell Signal." You can set up alerts in TradingView to be notified instantly when these signals occur, allowing you to monitor the market without constant chart watching.
KVS-Pivot Points-BağımsızKVS-Pivot Points-Independent
This indicator calculates pivot points across multiple timeframes (daily, weekly, monthly, yearly) to visualize price trends and support-resistance levels. It offers flexible analysis with various pivot types (Traditional, Fibonacci, Woodie, Classic, DM, Camarilla).Features: Multi-Timeframe Pivots: Displays current and previous period pivot points for daily, weekly, monthly, and yearly timeframes.
Pivot Types: Supports Traditional, Fibonacci, Woodie, Classic, DM, and Camarilla pivot calculation methods.
Customization: Adjustable line thickness, colors, label position (left/right), price display, and horizontal extension settings.
Flexible Visualization: Toggle current and previous period pivots independently.
Usage: Pivot points help identify trend direction and potential support-resistance zones.
Customize pivot types, timeframes, line, and label appearances via the settings menu.
Choose between daily-based or intraday data calculations to adapt to different chart types.
Note: This indicator is a tool for technical analysis and not financial advice. Use it alongside your own analysis.
KVS-MA VadeliEnglish Description
KVS-MA Futures: Smart Moving Averages and Automated Analysis
The KVS-MA Futures indicator is designed to support your trading decisions by combining multi-timeframe moving average analysis, popular EMA combinations, Esma (EMA/SMMA) crossovers, and automatic Fibonacci levels into a single, comprehensive tool.
With this versatile indicator, you can:
Flexible Timeframe Selection: Choose from predefined EMA combinations like Short-Term (12-26 EMA), Long-Term (13-21-34-55-89-144 EMA), "5-8-13-34", or "9-21" from a single menu to display on your chart.
Esma Strategy: Visualize crossovers of EMA21, SMMA21, and SMMA55 moving averages to follow signals from this specific strategy.
Automatic Fibonacci Levels: Easily identify potential support and resistance levels by viewing automatically drawn Fibonacci retracement and extension levels based on price movement over a specified length.
Visual Crossover Signals: The indicator displays numerous popular EMA crossovers (Golden Cross / Death Cross) on the chart with arrows and labels, ensuring you don't miss trend changes. You can adjust the visibility of these signals.
Live Information Table: A dynamic table provides a quick overview of the market by showing all significant EMA crossovers (as Buy/Sell signals), along with RSI and MACD Histogram values. The table's position is customizable.
KVS-MA Futures offers a comprehensive solution for traders looking to evaluate price action from a broader perspective and capture strong buy/sell signals.
RDS Support Profit Target v0.6.32Rip Dip Signals (RDS) Support Profit Target Indicator Overview (v0.6.32)
Overview: This Pine Script indicator identifies scalping opportunities based on support/resistance levels. Designed for automated trading via TradingView alerts connected to platforms like 3Commas (API integration for millisecond execution). Monitors up to 400 assets (e.g., Binance USDT crypto pairs), but works across all markets. Focuses on quality trades over quantity—tighten top-level parameters for fewer, higher-confidence signals. Ideal timeframe: 3-minute charts for quick turnarounds (max 4-5 hour holds). Targets 0.9-1.2% profit per trade, with 1.2-3% stop losses recommnded. You can play around with the settings and see what the results are instantly on the stats table. No need for back testing.
Entry (Buy) Conditions: Triggers on a green bar after a qualifying resistance line (min 40 bars length, configurable via "Min Res Line Length"; max lookback 200 bars) followed by a support line. Requires min 3 support lines (configurable) starting since resistance began (excludes buy support). Buy at close, but aims for improvement: Future refinements to enter at true support low, not mid-dip (add price action like break above lower highs, ATR for volume confirmation, fair value gaps).
Exit (Sell) Conditions: Primarily take-profit at +0.9% (configurable). Optional: Stop-loss at -1.8% (toggleable); Support exit if price hits prior support (with 0% buffer).
Top-Level Filters: Ensures quality before trading.
Volume: Min 1M USDT 24h to avoid low liquidity.
Success Rate: Min 70% total, 90% recent (over X days back).
Duration: Max avg 5 hours for scalping.
Profit: Min avg 0.7%. Purpose: Filters volatile/poor performers; prevents overtrading.
Tables:
Stats Table: Displays total/recent buys/sells, SL exits, success rates (color-coded vs thresholds), avg duration/profit. Role: Monitors performance; qualifies symbols.
Volume Table: Shows 24h USDT volume (color-coded). Role: Quick liquidity check.
Refinements: Current issue: Optimize SL to reduce losses and optimize entries better rather than on their way to the dips. Possible suggestions: Add entry validations (e.g., candle size, indicators).
Alerts ready: Universal alerts enabled since Jan 2025 (for full watchlists vs single assets) for multi-asset efficiency. Not crypto-exclusive; can be tested on stocks/forex.
Tooltips:
There are tooltips on each setting for user clarity. Just hover over the info symbol for each setting.
I'm open to any recommendations of how to enhance the entry/exit conditions. Please comment below with feedback which is gratefully received.
MomentumQ KeyXMomentumQ KeyX – Multi-Asset Bullish/Bearish Level Visualizer
The MomentumQ KeyX indicator is a clean and powerful tool designed to help traders visualize key bullish and bearish price levels across up to three assets. It simplifies multi-asset analysis by plotting user-defined horizontal levels directly on your chart, making support and resistance zones instantly clear.
How It Works
User-Defined Level Inputs
Enter your own bullish and bearish price levels for each asset (up to 3), separated by commas.
Example: 4200,4250,4300 for bullish levels or 4100,4050 for bearish levels.
Line Drawing Engine
Each level is plotted as a horizontal dashed line on the chart.
Green (or user-selected) for bullish levels, red (or user-selected) for bearish levels.
Lines extend 500 bars left and right for high visibility.
Grouped Input Interface
Inputs are organized under clear sections: Asset 1, Asset 2, and Asset 3.
Tooltips are included to guide proper formatting and input.
Key Features
Multi-Asset Support
Supports input and visualization for up to three different assets in one script.
Custom Color Settings
Easily change bullish and bearish line colors in the Style Settings group.
Clear Visuals
Horizontal dashed lines allow for fast identification of key levels used in your trading logic.
No Noise
The indicator displays only the levels you define—nothing more.
How to Use
Open the indicator settings.
Expand the sections for Asset 1, Asset 2, and Asset 3 to enter levels.
Separate multiple levels with commas (e.g., 4150,4180,4210).
Customize the line colors under Style Settings if desired.
Monitor how price reacts at your defined zones.
Why It’s Useful
Helps reinforce your personal market logic instead of relying on preset chart patterns.
Ideal for those who trade based on price action, order flow, or key reaction zones.
Works across asset classes including indices, stocks, crypto, and commodities.
Provides a structured, clean way to stay focused on meaningful levels.
Use MomentumQ KeyX to structure your charts around your own thinking and maintain clarity in any market environment.
Disclaimer
The MomentumQ KeyX indicator is intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. Trading and investing involve risk, and past performance is not indicative of future results.
Always conduct your own research and consult with a licensed financial advisor before making any trading decisions. The author assumes no responsibility for any trading outcomes based on the use of this tool.
Support and Resistance V1 | AnonycryptousThe "Support and Resistance V1" indicator: identify key support, resistance levels, trendlines, pivot points and volume data.
This indicator provides flexibility and customization, allowing traders to adapt it to their specific trading strategies.
This indicator is intended for educational and informational purposes only and should not be considered financial advice. Trading involves significant risk, and you should consult with a financial advisor before making any trading decisions. The performance of this indicator is not guaranteed, and past results do not predict future performance. Use at your own risk.
Support and Resistance V1 | AnonycryptousThe "Support and Resistance V1" indicator is a comprehensive tool for traders on the TradingView platform, designed to not only identify key support and resistance levels but also trendlines. Using two primary techniques: pivot points and volume data. This indicator provides flexibility and customization, allowing traders to adapt it to their specific trading strategies.
This indicator is intended for educational and informational purposes only and should not be considered financial advice. Trading involves significant risk, and you should consult with a financial advisor before making any trading decisions. The performance of this indicator is not guaranteed, and past results do not predict future performance. Use at your own risk.
TKC-Camarilla📌 TKC-Camarilla – Advanced Intraday Support/Resistance Levels
TKC-Camarilla is a powerful intraday tool based on the Camarilla Equation, designed to help traders identify key support and resistance zones, breakout levels, and mean-reversion opportunities. This version is optimized for both discretionary and systematic trading.
🔑 Features:
Nine core Camarilla levels: H4, H3, H2, H1, Pivot, L1, L2, L3, L4
Strategic level labels:
H4 – Long Breakout
H3 – Long
Pivot – Mean Reversion Anchor
L3 – Short
L4 – Short Breakout
Daily level calculation (based on previous day’s High, Low, Close)
Custom colors and visibility options
Inline price and label descriptions
Breakout alerts for H4/L4 and H3/L3
Info table toggle for at-a-glance level display
Support for custom line styles, label sizes, and extensions
🎯 Use Cases:
Breakout Trading: Enter long above H4 or short below L4
Reversion Setups: Trade back to Pivot from H3/L3
Scalping: Use H1/L1 for micro-trend turns
Bias Detection: Daily bias based on proximity to H3/L3
📈 How It Works:
Levels are drawn based on the previous day’s range, and automatically update at each new daily candle. Labels are placed above the lines with contextual cues and real-time pricing.
Advanced Range Theory - ART📊 Advanced Range Theory (ART): The Institutional Blueprint
Stop drawing lines. Start reading the blueprint of the market. Advanced Range Theory (ART) is not another support and resistance indicator; it is a military-grade market structure engine designed to decode the language of institutional capital. It operates on a single, powerful premise: markets move in phases of consolidation and expansion, and the key to anticipation lies in understanding the complete lifecycle of these phases.
ART provides a living, breathing map of the battlefield, identifying institutional accumulation zones and tracking them with unparalleled precision from their inception as "Pending" ranges to their ultimate classification after a breakout. This is your X-ray into the market's skeletal structure.
🔬 THEORETICAL FRAMEWORK: THE ARCHITECTURE OF PRICE ACTION
ART is built on a multi-layered system of logic that moves beyond static levels. It treats ranges as dynamic entities with a narrative—a beginning, a middle, and an end. The core of the system is the dynamic classification engine, which analyzes not just the range, but the character of the price action that resolves it.
1. The Range Lifecycle: From Accumulation to Classification
This is the revolutionary heart of ART. A range's true identity is only revealed by how it is broken.
Phase 1: PENDING (Yellow): A new range is identified based on a period of price consolidation (a "parent" candle followed by a minimum number of "inside" candles). At this stage, it is a neutral zone of potential energy—an area where institutions are likely building positions. It is a question the market has not yet answered.
Phase 2: MITIGATION & CLASSIFICATION: When price breaks out and reaches a calculated extension level, the range is considered "mitigated." At this exact moment, ART analyzes the breakout's DNA to classify the range's true intent:
TYPE 1 - BREAKOUT (Blue): Characterized by a strong, impulsive move with confirming volume. This is a high-conviction breakout, signaling aggressive institutional participation and the likely start of a new trend. It is a statement of intent.
TYPE 2 - REVERSAL (Orange): Occurs when price attempts to break one way but is aggressively rejected, reversing and breaking out the other side. This signals absorption and a "failed auction," often marking significant market turning points.
TYPE 3 - PIVOT (Green): A more balanced breakout, lacking the explosive momentum of a Type 1. This often represents a resolution after a period of indecision or a pivot within a larger trading range.
2. The Hierarchical Map: Source & S/R Levels
ART doesn't just draw boxes; it builds a genealogical map of market structure.
SOURCE LEVEL (Thick Gold Line): This is the "genesis" point—the most recently mitigated range. It acts as the primary point of origin for the current market swing and serves as a critical level for determining overall bias. Price action above the Source is generally bullish; below is bearish.
S/R LEVELS (Cyan Lines): When a range is mitigated, the price level where it broke becomes a key Support/Resistance zone for the future. ART tracks the two most recent S/R levels, as these often act as powerful magnets or rejection points for price.
3. The Multi-Factor Validation Engine
To eliminate noise and focus only on institutionally significant ranges, every potential range must pass a rigorous quality control check:
Time-Based Consolidation: Requires a minimum number of consecutive inside candles (minInsideCandles), ensuring a true period of balance.
Volatility-Based Significance: The range's size must be greater than a multiple of the Average True Range (minRangeSize), filtering out insignificant micro-consolidations.
Participation Confirmation: The parent candle of the range is checked against average volume to ensure there was meaningful activity during its formation.
⚙️ THE COMMAND CONSOLE: CONFIGURING YOUR ART ENGINE
Every input is designed to give you granular control over the detection engine, allowing you to tune ART to any market or timeframe with precision. Each tooltip in the script provides a deep dive, but here is a summary of the core controls.
🎯 ART Detection Engine
Minimum Inside Candles: The soul of the detection algorithm. It defines the minimum number of bars that must be contained within a single "parent" candle to qualify as a range. Higher values (3-4) find major, significant consolidation zones. Lower values (1-2) are more sensitive and will identify shorter-term accumulation patterns.
Extension Multiplier & Fibonacci Extension: These control the profit target projections. The Extension Multiplier uses a simple measured move (e.g., 1.0 = a 1:1 projection of the range's height). The Fibonacci Extension uses the golden ratio (1.618) for harmonically-derived targets.
Mitigation Method (Cross vs. Close): Determines how a breakout is confirmed. Cross is more responsive, triggering as soon as price touches the extension. Close is more conservative, requiring a full candle to close beyond the level, which helps filter out fake-outs from wicks.
Min Range Size (ATR): A crucial noise filter. It ensures that ART ignores tiny, insignificant ranges by requiring a range's height to be a certain multiple of the current market volatility (ATR).
📊 Display & Visual Configuration
These settings give you full control over the visual interface. You can toggle every single element—from the Webb Scanner to the S/R Levels—to create a clean or a comprehensive view. Choose a color theme that suits your charting environment or define a fully custom palette.
🕸️ Webb Analysis Scanner
This is a unique real-time flow analysis tool. It draws dynamic, animated lines from the current price to recent historical points. This visualization helps reveal hidden "tendrils" of momentum and short-term support/resistance that are not immediately obvious, acting as a "sonar" for immediate price flow.
📊 THE ANALYTICS HUB: YOUR DASHBOARD DECODED
The dashboard provides a real-time, at-a-glance intelligence briefing on the current state of market structure as seen by the ART engine.
RANGE METRICS: This section is a "census" of the market's structure. It tells you the total number of ranges identified, how many are still Pending (awaiting a breakout), how many are Unmitigated (active but not yet broken), and how many have been Mitigated (classified and complete).
TYPE BREAKDOWN: This is a powerful gauge of market character. A high count of Type 1 (Breakout) ranges suggests a strong, trending environment. A rising number of Type 2 (Reversal) ranges can signal market exhaustion and potential trend changes. A dominant Type 3 (Pivot) count indicates a balanced, rotational market.
KEY GUIDE: The Large dashboard includes a full legend, so you never have to guess what a line or color represents. It's your built-in user manual.
🎨 DECODING THE BLUEPRINT: A VISUAL INTERPRETATION GUIDE
Every line and color in ART is designed for instant, intuitive understanding.
The Range Lines:
Yellow Lines: A Pending range. This is an active zone of accumulation. Pay close attention.
Colored Lines (Blue/Orange/Green): An unmitigated, classified range. The color tells you its breakout character.
Dotted Lines: A Mitigated range. Its story has been told. These historical levels can still act as support or resistance.
The Identification Zones: These colored boxes appear at a range's origin point after it has been classified. They are the "birth certificate" of the range, permanently marking its type (Breakout, Reversal, or Pivot) and providing an immediate visual history of market behavior.
The Hierarchical Lines:
Thick Gold Line (Source): The most important line on your chart. It is the anchor for your bias.
Cyan Lines (S/R): High-probability decision points. Expect reactions here.
Purple Dotted Lines (Extensions): Logical, calculated profit targets for breaking ranges.
🔧 THE ARCHITECT'S VISION: THE DEVELOPMENT JOURNEY
ART was born from a deep frustration with the static and subjective nature of traditional market structure analysis. Drawing lines by hand is inconsistent, and most indicators are reactive, only confirming what has already happened. The goal was to create a proactive, objective, and dynamic framework that could think about the market in terms of phases and lifecycles.
The breakthrough came from a simple shift in perspective: a range's true character isn't defined when it forms, but by how it resolves. This led to the development of the "post-breakout classification engine," which waits for the market to show its hand before assigning a definitive type. The Webb Scanner was inspired by the desire to visualize the unseen, to create a tool that could feel the immediate "pull" and "push" of price flow. The result is not just an indicator; it is a new language for interpreting price action, built on a foundation of logic, clarity, and precision.
⚠️ RISK DISCLAIMER & BEST PRACTICES
Advanced Range Theory is a professional-grade analytical tool designed to enhance a trader's decision-making process. It does not provide direct buy or sell signals. The levels and classifications it generates are based on historical price action and mathematical probabilities. All trading involves substantial risk, and past performance is not indicative of future results. Always use this tool in conjunction with a robust risk management plan.
"I fear not the man who has practiced 10,000 kicks once, but I fear the man who has practiced one kick 10,000 times."
— Dskyz, Trade with insight. Trade with anticipation.
— Bruce Lee
Simply-Forex Combined S/RMulti-Timeframe Support & Resistance
Combined Daily & Higher Timeframe Support and Resistance Levels
What It Does:
Displays daily support and resistance levels alongside higher timeframe levels on your chart
Creates visual zones around key support and resistance areas
Includes weekly separators to assist with time-based analysis
Key Features:
✅ Daily Support and Resistance Levels (Automated)
Uses highs and lows to generate support and resistance zones
Lines change colour when price touches the levels
Customizable lookback periods
Optimized for use on timeframes from 4H down to 1M
✅ Higher Timeframe Support and Resistance Levels (Automated)
Automatically updates levels based on higher timeframe swing points
Ideal for longer-term context and bias
Customization settings separate from daily levels
Works best on timeframes from Daily down to 1H
Best For:
Multi-timeframe analysis
Identifying key institutional price levels
Spotting bounce and breakout opportunities
Setting more accurate stop-losses and take-profits
Struggling With Support & Resistance?
If you're unsure how to plot support and resistance, or where the key levels are, this tool simplifies the entire process — making it easy to stay aligned with the market structure across multiple timeframes.
Please note: This indicator is part of the price action suite.
To gain access to this, will mean you also have access to the Simply Forex Price Action indicator
Simply-Forex Price ActionPrice Action Toolkit
Core Swing Point Detection System
🔹 Multi-Length Swing Point Analysis
This indicator detects price swings using multiple swing lengths simultaneously, offering a layered view of market structure:
Captures short-term reversals and long-term trend shifts
Enables analysis across multiple time horizons
Enhances overall context for entries, exits, and trend direction
🔹 Swing Point Classification
Each swing point is automatically labelled as one of the following:
HH (Higher High)
HL (Higher Low)
LH (Lower High)
LL (Lower Low)
What it does:
Instantly reveals the current market structure by showing the relationship between consecutive swing points — crucial for trend analysis and trade planning.
Visual Display Features
🔹 Swing Point Breakout Lines
What it does:
Plots breakout lines based on recent swing points, helping traders:
Identify structure shifts
Spot breakout or reversal levels
Highlight potential entry and exit points
Moving Average Features
🔹 Standard SMA (Simple Moving Average)
What it does:
Shows dynamic trend direction
Acts as support/resistance
Smooths price data for better clarity
🔹 20SMA River
What it does:
Creates a flowing “river” or price channel to:
Highlight the average range of price movement
Assist in trend channel trading
Identify mean reversion or momentum continuation zones
Enhanced Daily Trend Display System
🔹 Multi-Mode Trend Analysis
Three trend modes to suit different trading styles:
✅ Real-Time Mode
Live trend updates based on current price action
Great for scalpers and intraday traders
Responds immediately to market structure changes
✅ Daily Close Mode
Uses confirmed daily candle closes only
Eliminates noise from intraday fluctuations
Ideal for swing trading and longer-term analysis
✅ Both Mode
Side-by-side display of both real-time and daily-close trends
Helps compare short-term signals with confirmed long-term direction
Excellent for traders seeking full market context
🔹 What it does:
Provides adaptable trend analysis tailored to your strategy — whether you’re a scalper needing instant feedback or a swing trader relying on confirmed closes.
Practical Applications
🟢 For Day Traders
Real-time trend display = instant feedback
Multi-swing detection = fast structure shifts
Clean breakout visuals = clear entry/exit cues
🔵 For Swing Traders
Daily close mode = reliable trend confirmation
Multi-timeframe analysis = strategic planning
SMA integration = trend + structure in sync
✅ Summary
This comprehensive Price Action Toolkit adapts to all timeframes and trading styles. Whether you're focused on tactical intraday moves or strategic trend swings, it provides everything you need to stay in sync with market structure and direction — all in one streamlined tool.
KIORI - VWAP mit StdDev + 0,25 Bändern🎯 VWAP Enhanced - Professional Standard Deviation Bands with Precision Zones
This advanced VWAP indicator provides comprehensive price movement analysis through multi-layered standard deviation bands with additional 0.25 precision zones.
🔥 Key Features:
VWAP core line (blue) - Volume Weighted Average Price
3-tier standard deviation bands (1x, 2x, 3x) with individual color coding
0.25 precision zones around EVERY standard deviation line (above/below)
Complete band filling for better visual orientation
Flexible anchor periods (Session, Week, Month, Quarter, Year, Earnings, Dividends, Splits)
📊 Color Coding:
🔵 VWAP + 0.25 zones (Light Blue)
🟢 1x StdDev + 0.25 zones (Green/Light Green)
🟡 2x StdDev + 0.25 zones (Yellow/Light Yellow)
🔴 3x StdDev + 0.25 zones (Red/Light Red)
⚡ Trading Applications:
Support/Resistance at standard deviation lines
Precise entry/exit points through 0.25 zones
Volatility measurement across multiple levels
Mean-reversion strategies with clear target areas
Breakout detection when exceeding outer bands
🎨 Optimized for:
Day trading and scalping
Swing trading strategies
Volatility-based positioning
Multi-timeframe analysis
This indicator combines proven VWAP methodology with high-precision standard deviation zones, providing traders with a professional tool for precise market analysis and positioning
PMJ SnR Active EMATrend Following Indicator with active color changing Support and Resistance Levels, guided by fast and smooth EMA's.
Candle close above FAST 9 EMA--buy signal, SL somewhere bellow the 9 Smoothed EMA
Vice Versa for SELL scenarios.
Add at every Candle close Above until Sell scenario is triggered.
www.tradingview.com
Candle close on high time frameOVERVIEW
This indicator plots persistent closing levels of higher time frame candles (H1, H4, and Daily) on the active intraday chart in real time. Unlike similar tools, it offers granular control over line projection length, fully independent toggles per timeframe, and a built-in mechanism that automatically limits the total number of historical levels to avoid chart clutter and performance issues.
CONCEPTS
Key levels from higher time frames often act as areas where price reacts or consolidates. By projecting each candle's exact closing price forward as a horizontal reference, traders can quickly identify dynamic support and resistance zones relevant to the current price action. This indicator enables seamless multi-timeframe analysis without the need to manually switch chart intervals or re-draw lines.
FEATURES
Independent Time Frame Selection: Enable or disable H1, H4, and Daily levels individually to tailor the analysis.
Custom Extension Length: Each timeframe's closing level can be projected forward for a user-defined number of bars.
Performance Optimization: The script maintains an internal limit (default: 100) on the number of active lines. When this threshold is exceeded, the oldest lines are removed automatically.
Visual Differentiation: Colors for each timeframe are fully customizable, enabling immediate recognition of level origin.
Immediate Update: New levels appear as soon as a higher timeframe candle closes, ensuring real-time reference.
USAGE
From the indicator inputs, select which timeframes you want to track.
Adjust the extension lengths to fit your trading style and time horizon.
Customize the line colors for clarity and personal preference.
Use these projected levels as part of your confluence criteria for entries, exits, or stop placement.
Combine with trend indicators or price action tools to enhance your multi-timeframe strategy.
ORIGINALITY AND ADDED VALUE
While similar scripts exist that plot higher timeframe levels, this implementation differs in:
Its efficient automatic cleanup of old lines to preserve chart performance.
The independent extension and color settings per timeframe.
Immediate reaction to new candle closes without repainting.
Simplicity of use combined with precise customization.
This combination makes it a practical and flexible tool for traders who rely on clear HTF level visualization without manual drawing or the limitations of built-in TradingView tools.
LICENSE
This script is published open-source under the Mozilla Public License 2.0.
Round Number Levels ProRound Number Levels Pro is a powerful support and resistance indicator that automatically plots psychological price levels on your chart.
What it does:
- Displays major round number levels (100, 200, 300, etc.) with prominent lines
- Shows mid-level lines (50, 150, 250, etc.) for additional reference points
- All lines extend across the entire chart for maximum visibility
- Automatically adjusts levels based on current price action
Key Features:
- Customizable Font Sizes - Large text for main levels, normal for mid-levels
- Clean Black Styling - Professional appearance that works on any chart background
- Flexible Line Styles - Choose solid, dashed, or dotted lines for main and mid levels
- Adjustable Parameters - Control number of levels, rounding increments, and label positioning
- Full Chart Extension - Lines extend both directions for complete price reference
Perfect for:
- Day traders looking for key psychological support/resistance levels
- Swing traders identifying major price zones
- Any trader who uses round numbers as decision points
How to use:
Simply add to your chart and the indicator will automatically plot relevant round number levels. Customize the settings to match your trading style and timeframe.
These psychological levels are where many traders make decisions, often creating natural support and resistance zones in the market.
Fair Value Gap MTF [by Oberlunar]Fair Value Gap MTF is a multi-timeframe indicator designed to detect and display Fair Value Gaps (FVGs) across up to five customizable timeframes. Fair Value Gaps are price inefficiencies—zones where the market moved too quickly, leaving unfilled areas between candles. These gaps are often used by traders as reference points for future price retracements, as they tend to be revisited or “mitigated” over time.
This indicator extends the traditional FVG concept by introducing dynamic multi-timeframe tracking. Each timeframe has its own visual layer, with distinct user-defined colors for bullish and bearish gaps. The script not only highlights newly formed FVGs but also updates them visually when they are touched by price. Mitigated FVGs are recolored in real time, and an optional setting allows the size of these zones to shrink progressively, reflecting only the remaining untested portion.
Labels at the center of each box display the originating timeframe, offering clear visual context. All calculations are properly aligned with the display chart, ensuring that each FVG is correctly projected into the current view, regardless of its timeframe of origin.
Fair Value Gaps often act as support or resistance levels. Bullish FVGs can serve as areas where price may find support, while bearish FVGs can signal potential resistance. When these zones are mitigated repeatedly, it typically reflects areas of institutional interest, liquidity pools, or zones of accumulation and distribution. Such behavior makes them particularly significant in breakout and reversal strategies.
— Oberlunar 👁️★
Useful Open Price Lines - Multi-Timeframe SupportDisplay important opening price levels on your chart with this comprehensive indicator.
KEY FEATURES:
✓ Track up to 6 different opening prices simultaneously
✓ Support for intraday time-based opens (any hour:minute)
✓ Higher timeframe opens: Daily, Weekly, Monthly, Quarterly, Semi-Annual, Yearly
✓ Automatic line extension with customizable cutoff
✓ Clean chart option - hide previous day's lines
✓ Full timezone support for global markets
✓ Customizable colors, labels, and line styles
USE CASES:
- Day traders: Track key session opens (Asian, London, NY)
- Swing traders: Monitor weekly and monthly opens
- Position traders: Track quarterly and yearly opens
- Multi-timeframe analysis: See all key levels at once
CUSTOMIZATION:
- Choose any time for intraday opens (00:00 - 23:00)
- Select from multiple timeframes (D, W, M, 3M, 6M, 12M)
- Customize labels, colors, and line styles
- Adjust label offset and size
- Set line extension cutoff time
The indicator is optimized for performance and works smoothly on all timeframes.
Fibonacci retracementHi all!
This indicator will show you the most recent Fibonacci retracement in the current trend. So if the trend is bullish the Fibonacci retracement will be drawn from swing low to high and from swing high to low in a bearish trend.
The uniqueness in this script lies in the adaptation to trend. To only plot the Fibonacci retracements according to the current market trend.
The trend is determined through break of structures (BOS) and change of characters (CHoCH). A change of character can be of type change of character plus (with a failed swing) and will then be shown as CHoCH+. This is possible through my library 'MarketStructure' (). It only uses break of structures and change of characters to be able to determine the trend, if you want a more detailed picture of the market structure you can use my script 'Market structure' ().
History and what to look for
Fibonacci retracement levels are used by many traders and are levels that are not Fibonacci sequence numbers themselves but they deriver from them. Some examples are:
23,6% - Divide a number by one three places ahead (e.g. 13/55)
38,2% - Divide a number by the one two places ahead (e.g. 21/55)
50% - Not from the Fibonacci sequence, but it's a number that price has reacted from in the past. Markets tend to retrace half a move before continuing
61,8% - The "golden retracement level". It derives from the "golden ratio" and is a core component of the Fibonacci sequence. The further you go in the Fibonacci sequence the preceding number divided by the current number will get closer and closer to this "golden ratio". This level is considered the most important Fibonacci retracement level by many traders
78,6% - Square root of 61.8%. This is often considered a deep correction (but not a trend reversal) and are often used for late entries
These levels are considered "key" and most significant. You want to look for a retracement of the price (down in a bullish trend and up in a bearish trend) to give you good entries.
Settings
For the trend you can set the pivot/swing lengths (right and left) and use the checkbox if you want these pivots to have labels. This can be done in the 'Market strucure' section.
In the 'Fibonacci retracement' section there is settings for the actual Fibonacci retracement. You can enable the trendline, set the color and the style of it. You can select which levels that should be shown by the indicator. There are 11 levels enabled by default, they are; 0-4.236. All settings in this section tries to be as similar to the "Fib Retracement" tool in Tradingview. You can also select the style of these lines (solid, dashed or dotted) and if you want them to extend to the right or not.
After this you can select if the Fibonacci retracement should be reversed or not, if prices should be displayed, if levels should be displayed and if to show the decimal levels or percentages and lastly the font size of these labels.
All defaults are based on the "Fib Retracement" tool by Tradingview.
Visualization
This indicator aims to be as visually similar to the default ("Fib Retracement") tool here on Tradingview. It will plot the Fibonacci retracement (called Auto Fibonacci/Auto fib) according to the trend from the library 'MarketStrucure'. The big differences from the "Fib Retracement" tool by Tradingview is that it's automatic (that adapts to trend), the market structure is visualized through lines and labels (showing 'BOS' for break of structures and 'CHoCH'/'CHoCH+' for change of characters) and that the labels showing information about the levels are positioned to be highly visible (left if <50% otherwise right if in a bullish trend, vice versa in a bearish trend or if reversed).
Don't hesitate if you have any feedback or nice feature suggestions!
Best of trading luck!
RB3 DEMO – Rejection Blocks Visual ExampleThis is a simplified demo version of a custom Rejection Block (RB) visual indicator. It identifies potential bullish and bearish rejection zones based purely on candle structure, without using any time-based or algorithmic filters.
🧠 What it does:
• Detects Bullish and Bearish Rejection Blocks using clean price action logic
• Highlights those zones with boxes, optional lines, and labels
• Designed to help traders visually study price rejections and market structure
⚙️ How it works:
• Bullish RB = red candle with a lower low than the previous and next candle
• Bearish RB = green candle with a higher high than the previous and next candle
• No time filters or hidden logic are used — this tool is purely structural
🎯 Best used by:
• Traders who want to visualize potential rejection zones
• Beginners studying price action and structural reversals
• Visual learners who prefer clean chart-based confirmations
✅ This demo does **not** include institutional filters, time anchors (e.g., TRAL‑03), or sequence-based validation.
📌 A more advanced version with time-reactive filtering logic is available privately.
ℹ️ To use: enable "Boxes" and/or "Labels" to highlight rejection blocks clearly. Works on all timeframes.