Get started

Trend

HMA Trend Scalper V1[wjdtks255] Overview This indicator is a high-performance trend-following system optimized for crypto futures trading. It provides clear entry signals and dynamic, real-time risk management tools to help traders stay on the right side of the market. Key Features Dynamic Trend Tracking: Uses a specialized HMA (Hull Moving Average) to filter market noise and identify the core trend. Real-time TP/SL Extension: Unlike static indicators, the Take Profit (TP) and Stop Loss (SL) lines extend candle-by-candle along with the price action. Clean Chart UI: Lines only exist from the entry point to the current candle, preventing chart clutter. Automatic Completion: Once the price hits a target, the line stops extending and marks the result (Target Hit or Stop Out). Trading Strategy (How to Trade) 1. Long Entry (🚀 LONG) Condition: The price must be above the trend line, and a breakout of the recent 5-candle high must occur with significant volume. Action: Enter a Long position when the "🚀 LONG" label appears. Exit: Hold until the price reaches the Cyan (Aqua) TP line or hits the Yellow SL line. 2. Short Entry (💀 SHORT) Condition: The price must be below the trend line, and a breakdown of the recent 5-candle low must occur with significant volume. Action: Enter a Short position when the "💀 SHORT" label appears. Exit: Hold until the price reaches the Cyan (Aqua) TP line or hits the Yellow SL line. 3. Risk Management Stop Loss: The indicator automatically calculates the optimal SL based on recent volatility (ATR) and swing points. Take Profit: The TP is set at a calculated ratio to ensure a positive risk-to-reward setup. Settings Trend Sensitivity: Adjust the HMA length to match your preferred timeframe (Scalping vs. Swing). Volume Multiplier: Filter out weak moves by increasing the volume breakout requirement. Custom Styles: Fully customize line colors, widths, and styles (Solid, Dashed, Dotted) in the settings menu.
Pine Script® indicator
by wjdtks255
9
Zero-Lag ATR Trend [BackQuant]Zero-Lag ATR Trend Overview Zero-Lag ATR Trend is a volatility-adaptive trend-following overlay designed to identify directional market regimes with minimal delay while preserving structural clarity. The indicator combines a zero-lag moving average framework with a zero-lag volatility model to produce a trailing trend line that reacts quickly to meaningful price changes without becoming unstable or overly sensitive. Unlike conventional ATR-based trend tools that rely on lagging averages and delayed volatility estimates, this indicator applies zero-lag logic to both the trend centerline and the volatility calculation. The result is a trend structure that aligns more closely with real-time price action while still maintaining the discipline required for trend continuation trading. Core design philosophy The core idea behind Zero-Lag ATR Trend is simple: Reduce signal delay without sacrificing trend integrity. Adapt dynamically to changing volatility regimes. Provide a single, clean structure that defines trend direction, continuation, and invalidation. Instead of stacking multiple indicators, the script builds a complete trend framework from two tightly integrated components: a zero-lag trend spine and a zero-lag ATR trailing mechanism. Zero-lag trend spine The trend spine is constructed using a zero-lag moving average (ZLMA). This is achieved by applying a corrective step to a traditional moving average, effectively compensating for smoothing delay. Conceptually, the process works as follows: A base moving average is calculated from the selected price source. That moving average is then passed through a zero-lag correction. The correction pulls the line closer to current price without introducing noise. This produces a trend line that reacts faster than standard EMA, SMA, or HMA signals, particularly during early trend acceleration phases. Multiple moving-average types can be used inside the zero-lag framework, allowing traders to fine-tune responsiveness based on asset behavior and timeframe. Zero-lag volatility model Volatility is measured using True Range, but instead of applying classic ATR smoothing, the indicator uses a zero-lag smoothing pass on the True Range itself. This approach offers several advantages: Volatility expands more quickly during impulse moves. Volatility contracts faster during consolidations. Band width adjusts in near real-time to changing conditions. The smoothed zero-lag ATR is multiplied by a user-defined factor to create adaptive upper and lower boundaries around the trend spine. These boundaries define how much counter-movement price is allowed before the trend structure is invalidated. Volatility-aware trailing structure The trailing output is the defining feature of the indicator. It behaves as a one-directional trailing structure: In bullish conditions, the trailing line can only move upward. In bearish conditions, the trailing line can only move downward. Minor pullbacks inside the volatility envelope do not flip the trend. This logic prevents the indicator from reacting to shallow retracements and focuses instead on structural trend changes. Because the trailing behavior is volatility-scaled, the indicator remains stable during high volatility while still responding promptly during regime shifts. Trend flips and regime transitions Trend direction is determined by changes in the trailing structure itself rather than raw price crosses. A trend flip occurs only when price movement is strong enough, relative to current volatility, to force the trailing line to reverse direction. This means: Bullish flips represent genuine transitions into upward regimes. Bearish flips represent genuine transitions into downward regimes. Sideways noise is largely filtered out. As a result, the indicator is well suited for identifying medium-to-long trend phases rather than short-term oscillations. Visual structure and chart clarity The visual design is intentionally minimal and functional: The main trailing line is color-coded by trend direction. An optional ribbon or cloud reinforces directional bias. Optional candle coloring aligns price bars with the active trend. These elements allow traders to assess trend state instantly without interpreting multiple signals or overlays. How to use for trend following Trend bias Maintain a bullish bias while price holds above the trailing line. Maintain a bearish bias while price holds below the trailing line. Entries Trend flips can be used as initial directional entries. Pullbacks toward the trailing line often act as continuation opportunities. Momentum confirmation can be layered on top for additional confluence. Trend management The trailing line naturally functions as a dynamic stop reference. As long as price respects the trailing structure, the trend remains valid. A flip in direction signals a full regime transition rather than a minor correction. Why zero-lag matters for trend trading Traditional trend indicators often react late, especially during fast expansions, resulting in delayed entries and early exits. By reducing lag in both the trend calculation and the volatility model, Zero-Lag ATR Trend aims to capture a larger portion of directional moves while maintaining consistency and discipline. This makes it particularly effective for momentum-based trend following, breakout continuation strategies, and traders who prioritize staying aligned with dominant market structure rather than predicting reversals. Summary Zero-Lag ATR Trend is a complete trend-following framework built around responsiveness, adaptability, and clarity. Its zero-lag architecture allows it to respond earlier to meaningful price changes, while its volatility-aware trailing logic ensures that trends are only invalidated when structure truly breaks. The result is a clean, intuitive tool that supports disciplined trend participation across assets and timeframes.
Pine Script® indicator
by BackQuant
5
VWAP Gravity Oscillator (VGO) (Intraday Only)VWAP Gravity Oscillator (VGO) The VWAP Gravity Oscillator (VGO) is an intraday analytical indicator designed to quantify price displacement from VWAP and the rate of change of that displacement. The indicator models VWAP as a statistical equilibrium level and evaluates: Price deviation from VWAP (Delta) Momentum and acceleration of that deviation via MACD This framework enables assessment of trend persistence versus mean-reversion pressure in intraday price action. Methodology VWAP Delta Measures the signed distance between price and VWAP, representing directional bias relative to equilibrium. MACD on Delta Captures the first- and second-order dynamics of VWAP deviation, highlighting acceleration, deceleration, and potential inflection points. Zero Line Represents price–VWAP equilibrium. Crossings may indicate regime transitions. Interpretation Guidelines Positive Delta Price is trading above VWAP with positive directional bias. Negative Delta Price is trading below VWAP with negative directional bias. Increasing MACD Expansion of VWAP deviation (trend reinforcement). Decreasing or reversing MACD Contraction of VWAP deviation (mean-reversion risk). Intended Applications Intraday trend validation Early detection of trend exhaustion Mean-reversion risk assessment Filtering low-conviction or balanced market conditions Implementation Notes Designed exclusively for intraday timeframes Automatically suppressed on higher-timeframe charts Intended as a contextual analysis tool, not a standalone signal generator Conceptual Summary VGO evaluates whether price is diverging from, stabilising around, or reverting toward VWAP by analysing both displacement and its rate of change.
Pine Script® indicator
by gokul4trading
YUSUF KARA YZLM Moving Average and Buy/Sell SignalsThis indicator is a comprehensive technical analysis tool that combines dynamic trend tracking and a multiple moving average system. It offers four different moving average lines along with pivot points and an ATR (Average True Range) based trailing stop system. Features 1. Dynamic Trend Following System Center calculation based on pivot points (high/low) Adjustable trailing stop levels with ATR factor Automatic BUY and SELL signals Colored line according to trend direction (Green: Uptrend, Red: Downtrend) 2. Multiple Moving Average System 4 different periods (default: 10, 50, 100, 200) 4 different calculation methods: EMA (Exponential Moving Average) SMA (Simple Moving Average) WMA (Weighted Moving Average) HMA (Hull Moving Average) Same calculation method or source selection for all periods Parameters Trend Following Settings: Pivot Point Period (2): Calculation period of pivot points ATR Factor (3): ATR multiplier that determines the trailing stop width ATR Period (10): ATR calculation Period Moving Average Settings: Period Type: Select EMA, SMA, WMA, or HMA Period Type: Data source (Close, Open, High, Low, etc.) Periods 1-4: Moving average periods How to Use Trend Signals: BUY tag: Beginning of an uptrend (green) SELL tag: Beginning of a downtrend (red) The trend line shows the trailing stop level Moving Averages: Blue (10), Black (50), Orange (100), Red (200) Can be used to identify support/resistance levels and trend direction Crossovers are important signal points Strategy Suggestions BUY signal + price above moving averages = Strong buy SELL signal + price below moving averages = Strong sell The trend line can be used as a stop-loss level Moving average crossovers confirm trend changes Warnings Each signal means a profitable trade It will not come. Risk management should always be applied. It is recommended to use it together with other indicators and analysis methods. Past performance does not guarantee future results.
Pine Script® indicator
by noertz
7
Minervini Ultimate +VCPMinervini Ultimate Suite (SEPA Dashboard) This indicator implements Mark Minervini's "Trend Template" criteria combined with a Volatility Contraction Pattern (VCP) detector and a custom Relative Strength rating. It is designed to help traders visualize the technical health of a stock based on stage analysis concepts. This indicator serves as a complete Control System (Dashboard) for Mark Minervini's SEPA trading strategy. Instead of manually checking five different metrics on every chart, this indicator performs the mathematical calculations and presents the "bottom line" in a single, organized table. 1. What This Indicator Does The goal is to ensure you never enter a trade blindly. It verifies the stock against Minervini's strict requirements: Trend: Is the stock in a healthy Stage 2 Uptrend? Relative Strength: Is it stronger than the general market? Buy Risk: Is it the right time to buy, or is the price extended? Pressure: Are institutions accumulating or distributing? VCP: Is there a breakout opportunity (volatility contraction) right now? 2. Key Benefits Time-Saving: Instead of drawing lines and calculating percentages manually, you get immediate visual feedback (Green/Red). Discipline: The indicator will flag "Extended" (Red) if you attempt to buy a stock that has run up too much, saving you from late entries and unnecessary losses. Precision Timing: The VCP feature (Blue Dots) helps you identify the "calm before the storm"—the exact moment volatility contracts, which often precedes a major breakout. 3. Indicator Parameters & Features A. Minervini Pressure (Buying vs. Selling) What it checks: Money flow over the last 20 days. Calculation: Sums up volume on "Up Days" (Green) versus volume on "Down Days" (Red). Meaning: 🟢 Buying: More money is entering than leaving. A sign of institutional accumulation. 🔴 Selling: Selling pressure dominates. The price may be rising, but without strong volume backing. B. Buy Risk (Price Extension) What it checks: The distance of the current price from the 50-Day Moving Average. Minervini strictly warns against "chasing" stocks. Signals: 🟢 Low Risk: Price is within 0% – 15% of the 50MA. This is the ideal "Buy Zone". 🟡 Caution: Price is 15% – 25% away. Buy with increased caution. 🔴 Extended: Price is >25% from the MA. Do not buy. The probability of a pullback is high. ⚪ Broken: Price is below the 50MA. The short-term trend is damaged. C. TPR - Trend Template (Trend Power Rating) What it checks: Is the stock in a Stage 2 Uptrend? Strict Rules (All must be true for a PASS): Price > 50MA > 150MA > 200MA. The 200MA is trending UP (positive slope). Price is near the 52-Week High (within 25%). Price is above the 52-Week Low (at least 25%). Meaning: 🟢 PASSED: Technically healthy and ready to move. 🔴 FAILED: The trend structure is broken (e.g., MAs are entangled). D. RPR Score (Relative Performance Rating) What it checks: How strong the stock is compared to the general market (S&P 500 / SPY). Calculation: Weighted performance over 3, 6, 9, and 12 months vs. the SPY. The score ranges from 1 to 99. Meaning: 🟢 80-99: Market Leader. These are the stocks Minervini targets. 🟡 70-80: Good, but not elite. ⚪ Below 70: Laggard (weaker than the market). E. VCP Action (Volatility Contraction Pattern) What it checks: Monitors price tightness. It calculates the range between the highest close and lowest close over the last 5 days. Meaning: 🔵 SQUEEZE (Blue Text + Blue Dot on Chart): The price range has contracted to less than 2.5%. Why it matters: When a stock stops moving wildly and trades in a tight range ("Flat Line"), it indicates supply has dried up. A high-volume breakout often follows immediately.
Pine Script® indicator
by noam73
2
Trend Force Index (HTF Momentum)📌 Description Trend Force Index • HTF Momentum (TFI-HTF) is a market context and trend-strength indicator designed to help traders understand directional force, momentum quality, and higher-timeframe bias. This tool measures directional impulse and trend pressure using a dual-average force model, normalized by volatility. Instead of producing buy or sell signals, it focuses on how strong a move is, which side controls the market, and whether price is in a trending or compressing state. 🔍 What This Indicator Shows Directional Force: Identifies bullish, bearish, and neutral force zones Momentum Quality: Differentiates strong trends from weak or fading moves Compression Zones: Highlights low-force environments where trades are often lower quality Higher-Timeframe Context (HTF): Displays directional bias from a higher timeframe for alignment Volatility Normalization: Adapts to changing market conditions using ATR 🧭 How to Use Use force direction to confirm price action or structure-based setups Trade in alignment with HTF bias for higher-probability context Avoid entries during compression / low-force zones Best used alongside price action, market structure, VWAP, or support & resistance 🎛 UI Presets PRO Mode: Clean, subdued visuals for experienced traders BEGINNER Mode: Higher contrast visuals for easier interpretation ⚠️ Important Notes This indicator does NOT generate buy or sell signals.It is intended for analysis, confirmation, and market context only. Always combine with your own trading plan and risk management ⚠️ Disclaimer This indicator is provided for educational and analytical purposes only.It does not constitute financial advice or trade recommendations.All trading decisions and associated risks remain the sole responsibility of the user.Past market behavior does not guarantee future results.
Pine Script® indicator
by Market_Logic_India
Trade Confidence BoosterNOT FINANCIAL ADVICE. TRADE AT YOUR OWN RISK. The Smart Day Trader’s and Scalpers Secret Weapon Stop guessing. Start trading with confidence . The Trade Confidence Booster is a comprehensive trading system that transforms chaotic price action into crystal-clear entry and exit signals. Built for day traders and scalpers who demand a clean, rule-based indicator with structure, clarity, and consistency — without clutter. This indicator combines institutional-level analysis with simple, actionable signals. What Makes This Different? While others chase random breakouts and get stopped out repeatedly, Trade Confidence Booster waits for the market to show its hand through the coveted "Confidence Candle" pattern - a powerful consolidation signal that appears within clear trends and explosive moves. This isn't another repainted indicator making false promises. It's a complete trading framework that shows you: WHEN to enter (Confidence Candles + Entry Signals) Also, WHEN to trim and lock in gains (3 Customizable Trim Tiers) WHERE to exit (Dynamic and Customizable Trend Break Triggers) HOW MUCH confidence to put into the trade (Confluence Scoring System) Key Features 📊 Smart Trend Detection - Multi-layered trend analysis combining price structure, momentum, and volume that also has the ability to AVOID CHOP 💪 Confidence Candle Technology - Identifies low-risk, high-probability entry zones 🎯 7-Point Confluence System - Never guess if a setup is worth taking 📈 Clear Entry Signals - CALL/PUT labels complete with quality scores 💰 Automated Profit Management - Built-in trim levels with default settings at 0.35%, 0.80%, and 1.25% that are completely customizable 🛡️ Adaptive Trailing Stops - Protects profits while letting winners run with adjustable buffers that compliment your trading and risk style 📍 Multi-Timeframe Support Levels - Hourly S/R zones visible on any timeframe 📐 Dynamic Fibonacci Levels - Auto-adjusting to current trend 🔵 Opening Range Breakout (ORB) - Visually see three (3) days of Original Ranges based on your desired timeframe (default set at 15 minutes) and easily identify a breakout in either direction 📊 Volume Profile with POC - See where smart money is positioned This indicator isn’t built try and predict the market — it’s designed to help you stay aligned with structure, avoid chop, and manage trades with discipline.
Pine Script® indicator
by JaXolutions
11
Trader Otto - Kinetic Flux [System]Unlocking the fear of trading behind institutional momentum shifts. Trader Otto - Kinetic Flux is a proprietary momentum convergence system designed for traders who demand precision in volatile, fast-moving markets. By fusing proprietary volume-flow dynamics with a directional trend-following filter, this algorithm cuts through market noise to identify high-probability acceleration zones. Unlike standard indicators that lag behind price, the Kinetic Flux engine analyzes the specific moment where institutional capital flow aligns with directional bias. It doesn't just tell you the trend; it tells you when the trend has enough kinetic energy to sustain the move. 🔥 **Key Features:** **Protected Logic:** Complex statistical calculations are hidden behind a simple visual interface. No analysis paralysis—just clear, executable signals. **Color-Coded Momentum System:** - **Grey/Light Blue:** Neutral / No Trade Zone (Stay safe). - **Deep Blue:** Bullish Entry Signal (Energy + Direction Aligned). - **Green:** Established Bullish Momentum (Holding). - **Deep Pink:** Bearish Entry Signal (Resistance + Flow Detected). - **Red:** Established Bearish Momentum (Holding). **Visual Triggers:** - ✈️ **The Plane:** Confirmed Long Entry (Liftoff). - ⚓ **The Anchor:** Confirmed Short Entry (Gravity Pull). **⚙️ Multi-Mode Calibration (Adaptive):** Instantly adjust the system's sensitivity to match your trading environment via the settings menu: - **Standard:** Balanced calibration for general day trading and mixed markets. - **Aggressive:** Tuned for high-volatility scalping and fast-moving indices (filters minor pullbacks). - **Trend:** A slower, more robust filter designed for swing traders and intraday breakouts. - **Volatility:** Optimized for explosive breakout setups inspired by classic momentum strategies. **Volume Smoothing:** An optional fine-tuning parameter to reduce noise in low-liquidity environments. 💡 **How to Trade:** Wait for the Pilot (✈️) or Anchor (⚓) symbol to appear on a confirmed bar close. The color change indicates the kinetic shift. Use "Trend" mode for higher timeframes (H1+) and "Aggressive" for scalping indices and volatile FX pairs. ⚠️ **Disclaimer:** This tool is for educational purposes. Past performance is not indicative of future results. Always manage your risk.
Pine Script® indicator
by OttoJunior
NICHI (NuwenPham's Ichimoku)NICHI (NuwenPham’s Ichimoku) NICHI is a dual-engine Ichimoku indicator designed for modern, high-volatility markets. It preserves a faithful traditional Ichimoku while introducing an advanced, filter-driven Ichimoku framework for research, visualization, and discretionary trading. The goal of NICHI is not to replace Ichimoku — but to extend it. Overview NICHI includes two independent Ichimoku systems that can be enabled separately or together. 1. Standard Ichimoku A clean, traditional Hosoda Ichimoku using Donchian midpoints: Tenkan-sen (short period) Kijun-sen (medium period) Senkou Span A & B (forward displaced) Chikou Span (lagging) Design choice: The Standard Ichimoku is intentionally plotted in a separate pane to avoid cluttering the price chart. It serves as a reference / regime baseline, not a visual overlay. 2. Advanced Ichimoku The Advanced system keeps the Ichimoku structure intact but replaces the Donchian calculations with selectable smoothing filters. Each Ichimoku component (Tenkan, Kijun, Senkou B, Chikou) can be calculated using modern filters designed to handle volatility, noise, and regime shifts. Supported filters include: McGinley Dynamic (MD) VWMA (exchange or tick-derived volume) EMA / DEMA / SMA / SMMA / WMA ALMA / LSMA / Hull MA COVWMA / FRAMA / KAMA 50th Percentile Moving Median This allows Ichimoku to behave as: A smoother trend system A volatility-adaptive framework A momentum-responsive overlay Enhanced Cloud (Kumo) Modeling Advanced Kumo logic includes: Independent forward offsets for Span A and Span B Bull / bear regime classification aligned with how the cloud is actually drawn Adaptive cloud coloring Neutral cloud state when spans disagree This avoids misleading regime signals when different offsets are used. Directional Persistence Tracking NICHI tracks directional streaks for key components: Tenkan direction Kijun direction Span A direction Span B direction These persistence counters stabilize coloring, reduce flicker, and improve visual clarity during transitions. Bar Coloring Modes (Advanced) Three bar-coloring frameworks are included. Kumo-Based Above cloud → bullish Below cloud → bearish Inside cloud → neutral Tenkan / Kijun-Based Above both → bullish Below both → bearish Chikou-Based Chikou above past price → bullish Chikou below past price → bearish Each mode is intentionally distinct and serves a different trading style. Moving Average Overlays NICHI includes four optional moving average overlays (MA1–MA4): Configurable type, length, width, and source Intended for bias, confluence, or higher-timeframe context Controlled as code-level constants by design What Changed Since BETA This release promotes NICHI from beta to stable with the following key improvements: Chikou regime logic fixed: Chikou comparisons now reference historical price only, eliminating any future lookahead behavior. Kumo bull/bear alignment clarified: Cloud regime classification now matches how the cloud is visually drawn when Span A and Span B use different forward offsets. Kijun direction tracking corrected: Kijun coloring now reflects Kijun movement, not Tenkan movement. Bar coloring gated: Bar coloring is applied only when Advanced Ichimoku is enabled, preventing unintended behavior when using Standard mode alone. General stability and cleanup: Minor bug fixes, consistency improvements, and documentation clarity. Notes Advanced Ichimoku is intended for research and visualization, not as a turnkey strategy. Standard Ichimoku remains a faithful baseline. If reporting issues, please include symbol, timeframe, and a screenshot.
Pine Script® indicator
by NuwenPham
Trend & Daily Bias ( Fractals)Daily Bias Indicator based on Williams Fractals This indicator helps you determine your Daily Bias by combining two proven concepts: Williams Fractals for market structure and Follow-Through / Non-Follow-Through (FT/NFT) candle analysis. What it does The indicator identifies swing points using Williams Fractals and connects them with a Zig-Zag line to visualize market structure. It then analyzes the relationship between the two most recent closed candles to detect FT or NFT signals. Bullish FT: Price closed above the Previous Day High → expect continuation higher Bearish FT: Price closed below the Previous Day Low → expect continuation lower Bullish NFT: Price swept below the Previous Day Low but closed back above it → failed breakdown, expect reversal higher Bearish NFT: Price swept above the Previous Day High but closed back below it → failed breakout, expect reversal lower Key Features Automatic swing detection using Williams Fractals Zig-Zag lines connecting swing highs and lows (Gann Swing style) Dashed line showing the developing move from the last swing to the current extreme FT/NFT signal detection based on closed candles (stable throughout the trading day) Clean signal table in the corner of your chart How to use Add this indicator to your Daily chart. The signal table shows whether the most recent closed candle produced a Follow-Through or Non-Follow-Through pattern. Use this information to determine your directional bias for the trading day. Bullish FT or Bullish NFT → Look for long setups Bearish FT or Bearish NFT → Look for short setups No Signal → Wait for clarity Settings Fractal Periods: Number of bars on each side to confirm a fractal (default: 2) Show Swing Lines: Toggle the Zig-Zag lines on/off Show Fractals: Toggle the fractal triangles on/off Bullish/Bearish Swing Color: Customize line colors Line Width: Adjust thickness of swing lines Table Position: Move the signal table to any corner Note The FT/NFT detection uses the two previous closed candles , not the current candle. This ensures the signal remains stable and does not change while the current candle is still forming.
Pine Script® indicator
by trading-guide
3CRGANG - DIVERSIFIED TREND INDICATOROverview The "3CRGANG - DIVERSIFIED TREND INDICATOR" (DTI) is an advanced macro regime tool rooted in Victor Sperandeo’s timeless diversified trend approach, but fully evolved for modern global markets. It evaluates trend breadth and conviction by splitting the financial world into two critical layers: Drivers (Rates, Commodities, FX): Leading macro forces that reflect liquidity, inflation expectations, and dollar dynamics. Participation (US sector equities, Crypto, Emerging Markets): Risk assets that either confirm the macro signal through broad involvement or reveal dangerous divergences. The indicator delivers normalized scores (-1 to +1) for each layer and offers three modes: Drivers only, Participation only, or Blended overlay. This framework helps traders instantly identify high-conviction regimes, leadership shifts, late-cycle warnings, early recovery signals or cautionary divergences—providing institutional-grade context in a single pane. How It's Built: Core Concepts and Calculations Methodology Trend Determination: Each month, the indicator evaluates more than 30 key continuous futures contracts. It calculates the cumulative percentage price change over recent months and compares it to an exponential moving average (EMA) of the previous monthly returns. The EMA places greater emphasis on more recent data, with weights decreasing steadily for older periods (summing to 100%). An asset is considered: In uptrend when the current cumulative change is at or above the EMA In downtrend when below the EMA Flat (neutral) for energy commodities (Uranium, Oil, Natural Gas) instead of downtrend—to avoid false bearish readings during supply-driven ranging periods. Group scores are combined using balanced weighting: Drivers integrate Rates, a GDP-weighted FX basket, and Commodities (with adaptive handling when energy is neutral). Participation uses inverse-volatility weighting across equities, crypto, and emerging markets to reduce the influence of overly noisy assets. Final DTI values range from -1 (strong bearish breadth) to +1 (strong bullish breadth), with added context based on magnitude, speed of change, and prior direction. Why It's Useful Single-market trends often mislead in interconnected environments. DTI delivers immediate macro clarity: Are rising yields pressuring risk assets? → divergence = caution Is dollar strength suppressing commodities while equities surge? → potential regime shift Is participation narrowing in a mature bull? → late-cycle distribution Traders use it to confirm higher-timeframe bias, detect leadership changes (e.g., commodities leading = inflation), and avoid fighting strong macro drivers without risk-asset confirmation. How to Use It Apply in a separate pane. Select DTI Mode : DRIVERS → classic macro leadership view PARTICIPATION → risk-on/risk-off scope BLENDED → spot alignment vs divergence Choose Output Mode : TABLE → detailed dashboard with icons, weights, contributions, and score cell tooltips explaining current regime (e.g., "RAPID TIGHTENING", "STRONG USD DOMINANCE") HISTOGRAMS → visual comparison with intelligent nesting (weaker bar nests inside stronger when aligned) PLOTS → individual group lines with clustered labels Adjust table position to fit your layout. Interpretation: Scores near ±1 indicate high-conviction regimes; divergences between layers often precede turns. Why It's Unique and Worth Invite-Only Access Many breadth and intermarket tools are available, but few combine classic macro leadership with modern risk-asset participation in one clean system: Sperandeo-inspired macro leadership fused with modern risk-asset participation Custom recency-focused EMA weighting optimized across 30+ diverse contracts GDP-weighted FX basket + inverse-vol participation scaling Energy-specific neutral logic + adaptive commodity redistribution Smart histograms and clear regime tooltips. The result is reliable, low-noise macro context developed to deliver genuine institutional insight. Protecting the exact methodology ensures the edge remains exclusive to dedicated traders who value precision and originality.
Pine Script® indicator
by RotemB
TRENDSNIPER(4ZONES)[NETSGAIN] TRENDSNIPER(4ZONES) TrendSniper(4zones) is a structured trend-context indicator designed to help traders identify where meaningful opportunity exists — and where it does not. Rather than forecasting price or forcing entries, TrendSniper focuses on market conditions, visually separating trending environments from neutral or overextended states. This framework allows traders to operate with clarity, patience, and consistency — especially in volatile markets. The indicator is built to reduce decision pressure and emotional interference by clearly defining zones of trend alignment, neutrality, and risk-elevated extension. Markets do not offer opportunity at all times. TrendSniper’s purpose is to filter the market into four distinct behavioral zones, allowing traders to align their actions with the prevailing context instead of reacting impulsively to short-term price movement. The indicator is non-repainting and fully rule-based. 🟦 Bullish Trend Zone (Blue) Market structure is aligned to the upside Trend conditions favor long continuation Designed to support trend participation, not prediction 🟥 Bearish Trend Zone (Red) Market structure is aligned to the downside Trend conditions favor short continuation Highlights bearish control rather than entry timing ⬜ Neutral Zone (Gray) No structural edge present Trend alignment is unclear or transitioning Often a zone for risk management, trade review, or standing aside 🟨 Overextended Zone (Yellow) Price has moved significantly relative to recent volatility Trend may still exist, but risk is elevated Intended as a cautionary state rather than a hard prohibition TrendSniper includes a single adjustable parameter: Overextension Filter This setting controls how strictly extended moves are filtered. Lower values (e.g. 0.20) → Stricter filtering → Overextended zones appear more frequently Higher values (e.g. 0.30) → Looser filtering → Overextended zones appear less frequently This allows users to adapt the indicator to different volatility conditions and personal risk tolerance while preserving the core logic. Primary market focus: Crypto (BTC, ETH — spot or futures) Recommended timeframe: 4H Can be used on other symbols and timeframes, but behavior is optimized for crypto market structure TrendSniper is best used as a context framework, not a standalone entry system. It helps traders decide when to engage, when to manage risk, and when to wait. TrendSniper is intentionally minimal. It does not: Force entries Predict reversals Encourage overtrading Instead, it provides visual structure so traders can: Stay aligned with dominant trends Avoid low-quality conditions Reduce FOMO-driven decisions Focus on larger, cleaner moves This makes the indicator suitable for both beginners and experienced traders, as it communicates market state clearly without complexity. TrendSniper is not about speed. It is about precision, patience, and alignment. Trend conditions are identified first — execution decisions remain with the trader. Trend is your friend — but only when conditions are clear. This indicator is provided for informational and educational purposes only. It does not constitute financial, investment, or trading advice. All trading decisions made using this indicator are the sole responsibility of the user. Past performance is not indicative of future results. Trading involves risk.
Pine Script® indicator
by NETSGAIN
QSS v15.0 [Omni-Engine]# **QSS v15.0 | Institutional Quant System** ### **💎 The Only Indicator You Will Ever Need** **QSS (Quantitative Signal System) v15.0** is an all-in-one algorithmic trading engine designed to solve the biggest problem in trading: **fragmentation.** Instead of cluttering your chart with 10 different indicators (RSI, MACD, Bollinger Bands, Order Blocks, SuperTrend, etc.), QSS synthesizes them all into a single, high-probability decision engine. This is not just a "Buy/Sell" indicator. It is a complete **Institutional Trading Suite** that combines "Smart Money Concepts" (SMC) with quantitative trend analysis and dynamic risk management. --- ### **🚀 Key Features** #### **1. Dual-Core Signal Engine** Choose your weapon based on the asset class and volatility: * **Engine A: SuperTrend (Classic):** The industry standard for capturing major trends. Best for Swing Trading and Stocks. * **Engine B: OTT (Optimized Trend Tracker):** A faster, volatility-adaptive engine derived from VIDYA (Variable Index Dynamic Average). Best for Crypto and Scalping. #### **2. Institutional Intelligence (SMC)** * **Volumized Order Blocks (SMC):** Automatically detects Supply (Red Box) and Demand (Green Box) zones based on pivot volume. * *Smart Filter:* The system will **BLOCK** Buy signals if price is running straight into a Bearish Order Block (Resistance). * **Koncorde (Smart Money Flow):** Analyzes PVI (Positive Volume Index) vs. NVI (Negative Volume Index) to track "Sharks" (Institutions) vs. "Minnows" (Retail). * *Smart Filter:* Signals are only generated if Institutional Money Flow supports the direction. #### **3. The "Power 3" Confirmation Suite** Includes optional filters for the classic trinity of technical analysis: * **MACD:** Ensures momentum alignment. * **Stochastic:** Prevents buying at overbought peaks. * **Bollinger Bands:** Ensures trades only occur during volatility expansion (Squeeze breakout). #### **4. Advanced Noise Filtering** * **ADX Trend Strength:** Blocks signals during "dead" or choppy markets (ADX < 20). * **Candle Stability Index:** Ignores "wicky" candles and indecision dojis, preventing fake-outs. * **Trend Ribbon:** A dual-SMA cloud (21/34) that ensures you are always on the right side of the macro trend. #### **5. Dynamic Risk Management (R:R)** * Automatically calculates **Stop Loss** and **Take Profit** targets based on market volatility (ATR). * **TP1 (1:1):** Secure profit / Move stops to breakeven. * **TP2 (1:2):** Standard target. * **TP3 (1:3):** Trend runner. * *Visuals:* Draws clear entry, stop, and target lines on the chart when a trade is active. #### **6. Pro Dashboard** A dynamic panel that monitors: * **Trend Status:** (Bullish/Bearish) * **Market State:** (Trending/Parabolic/Ranging) * **Smart Money:** (Accumulating/Distributing) * **Live Trade Data:** Real-time entry price and targets when a position is open. --- ### **🛠️ Settings Guide** **🔥 SIGNAL ENGINE** * **Strategy Engine:** Toggle between `SuperTrend` (Safe) or `OTT` (Fast). **🧱 ORDER BLOCK FILTER** * **Respect Order Blocks:** If checked, the system will not Buy into Resistance or Sell into Support. * **Show OB Zones:** Toggles the visible Red/Green boxes on the chart. **📊 QUANT FILTERS** * **Smart Money (Sharks):** Requires Volume data. Filters out "Retail Traps." * **ADX (Trend Strength):** Set to `20` for standard filtering. Set to `15` for aggressive scalping. * **Candle Stability:** Filters out candles with long wicks. Essential for volatile Altcoins. **📈 CLASSIC INDICATORS** * **MACD / Stoch / BB:** Enable these if you want strict confluence. (Note: Enabling all will result in fewer, but higher precision signals). **🛡️ RISK MANAGEMENT** * **ATR Length:** Sensitivity of the volatility calculation. * **SL Multiplier:** Distance of Stop Loss (Default 2.0x ATR for Crypto). * **TP Multipliers:** Adjust your Risk:Reward ratios here. --- ### **💡 How to Trade with QSS v15** 1. **The Setup:** * Wait for a **"BUY"** or **"SELL"** label to appear. * Ensure the **Trend Ribbon** (Cloud) matches the signal color. * Check the **Dashboard**: Ensure "Smart Money" is in your favor (Accumulation for Buys). 2. **The Execution:** * Enter at the **Entry Price** shown on the chart. * Place your Stop Loss at the **Red Line**. * Take partial profits at the **Blue Dotted Lines** (TP1/TP2). 3. **Troubleshooting (Debug Mode):** * If you see the SuperTrend/OTT flip colors but **NO signal** appears, turn on **"🔧 Debug Mode"** in the settings. * Grey labels will appear on the chart explaining exactly *why* the trade was rejected (e.g., "⛔ REJECTED: Hitting OB Resistance" or "⛔ REJECTED: Low ADX"). --- **Disclaimer:** *This indicator is a tool for analysis, not financial advice. It combines multiple quantitative metrics to provide high-probability setups, but no system is 100% accurate. Always use proper risk management.* **Credits:** * OTT Logic based on Anıl Özekşi. * Koncorde Logic based on Blai5. * SMC Order Block logic adapted from FluxCharts concepts. * Synthesized and Optimized by rayu8.
Pine Script® indicator
by rayu8
4 Bar Sequential Counter (9 to 13) [DotGain]4-Bar Sequential Counter (Seq4) This indicator identifies potential trend exhaustion phases using a strict sequential count based on the relationship between the current closing price and the closing price four bars earlier. How it works • A bullish sequence is counted as long as the current close remains below the close from 4 bars ago. • A bearish sequence is counted as long as the current close remains above the close from 4 bars ago. • The count resets immediately if the respective condition is no longer met. • The sequence counts up to a maximum of 13 , after which it resets and a new sequence may begin. Visualization • Only counts from 9 to 13 are displayed on the chart. • Bullish sequences are plotted below price bars. • Bearish sequences are plotted above price bars. • The minimalist design keeps the chart clean and focused on potentially relevant exhaustion zones. Interpretation • A count of 9 may indicate an early sign of market overextension. • A count of 13 represents a more advanced sequence and a higher probability of consolidation or corrective price action. • This indicator is not a standalone trading system and should be used in combination with trend analysis, volume, and support/resistance levels. Alerts • Bullish sequence at 9 • Bullish sequence at 13 • Bearish sequence at 9 • Bearish sequence at 13 Disclaimer This "4-Bar Sequential Counter (9–13)" (Seq4) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice. This indicator is an independent implementation of a sequential counting method and is not affiliated with, or endorsed by any trademarked trading concepts or methodologies. The signals generated by this tool (Green and Red) are the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. All trading and investing in financial markets involves a substantial risk of loss. You can lose all of your invested capital. Past performance does not guarantee future results. This indicator highlights sequential price exhaustion patterns and may generate false, lagging, or incomplete signals. Markets can remain unpredictable longer than you can remain solvent. The creator DotGain assumes no liability for any financial losses or damages you may incur, directly or indirectly, as a result of using this indicator or the information it provides. You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR), validate signals with other methods, and consider your personal risk tolerance before entering any trade.
Pine Script® indicator
by DotGain
Moving Averages 20, 50, 150, 200This indicator plots four commonly used Simple Moving Averages on the price chart: 20, 50, 150, and 200. It is designed to help traders easily identify short-term, medium-term, and long-term trend direction, as well as key crossover events. Features: SMA 20 (purple) – short-term momentum SMA 50 (greenish) – intermediate trend SMA 150 (yellow) – long-term bias SMA 200 (orange) – major trend direction Visual crossover markers for: SMA 20 / SMA 150 SMA 50 / SMA 200 The indicator uses Pine Script® v6 and is fully compatible with the latest TradingView platform. All moving average lengths can be customized in the settings. This script is intended for trend analysis and confirmation and can be used across all markets and timeframes.
Pine Script® indicator
by ZivStocks
Reversal Radar - Sensitive Mode - SZ AlphaSensitive Mode is the early detection layer within the Reversal Radar framework. It is designed to highlight areas where market reversals may begin to emerge, not to generate trade entries. The radar is built on: Structural turns (pivot-based) Behavioral shifts (strength / weakness) Volatility & participation filters (ATR / Volume) Trend context via EMA Core thresholds are intentionally encapsulated into Sensitivity Tiers (Low / Medium / High) to preserve structural consistency and avoid overfitting. This tool is for risk awareness and context detection, not for trade execution or signal chasing. ----------------------------------------------------------------- Sensitive Mode 是 Reversal Radar 体系中的早期反转探测层，用于在市场结构出现变化时，提前标记潜在的反转关注区域。 它并非交易信号，也不用于给出买卖指令，而是通过： 结构拐点（Pivot） 行为变化（强弱转折） 波动与参与度过滤（ATR / Volume） 趋势环境参考（EMA） 来探测“反转开始被观察到的时刻”。 为避免误用，核心阈值已被收口为灵敏度档位（Low / Medium / High），用户只需选择观察节奏，而无需调参。 本工具用于风险识别与情境判断， 不是交易建议，也不是信号生成器。 Free structure. Decisions remain yours. — SZ Alpha
Pine Script® indicator
by SZ_Alpha
Swing Structure Map - SZ Alpha🔓 Why this is free Swing Structure Map · SZ Alpha is designed as market structure infrastructure, not as a trading strategy. Swing High / Swing Low are the shared language behind most technical systems. They describe structure, not decisions. That’s why this module is released free, by design. If you can’t see structure clearly, every “signal” becomes noise. 🧭 How you can use it Use it as a standalone market structure map Combine it with your own strategy or framework For context and validation, not decision replacement 🚫 What you won’t find here ❌ Buy / sell recommendations ❌ Win-rate or performance claims ❌ Emotional or opinion-driven conclusions This is not a tool that tells you what to do, but one that helps you see what the market is doing. ----------------------------------------------------------------- 🔓 为什么这是免费的 Swing Structure Map · SZ Alpha 被设计为结构基础设施，而不是交易策略。 Swing High / Swing Low（波段高低点） 是所有技术分析与交易系统的共同语言。 它们描述的是市场结构，而不是买卖答案。 因此，这一部分选择永久免费公开。 如果连结构都看不清，那任何“信号”，都只是噪音。 🧭 你可以如何使用 作为独立的市场结构地图 搭配你自己的交易系统或判断逻辑 用于验证认知，而不是替代决策 🚫 你不会在这里看到 ❌ 买卖建议 ❌ 胜率或收益承诺 ❌ 情绪化或主观结论 这不是一个“告诉你该做什么”的工具， 而是一个让你看清市场正在做什么的工具。 Free structure. Decisions remain yours. — SZ Alpha
Pine Script® indicator
by SZ_Alpha
Aincan Quantum TrendOverview The Aincan Quantum Trend is a proprietary trend-following system designed to reduce market noise while minimizing lag. Unlike standard indicators that rely solely on linear averaging, AQT utilizes a Rational Quadratic Kernel smoothing algorithm to calculate the true market direction. This approach allows traders to visualize the trend structure with higher fidelity than traditional methods. How It Works (The Math) The core of this script is based on non-linear regression logic, specifically adapted for financial time-series data: Rational Quadratic Smoothing: The script processes price action through a custom loop that applies a rational quadratic weight to historical data points. This creates a signal line that is responsive to sharp price changes but resistant to chop/sideways noise. Flux Filtering: We implement a multi-tier trend validation system that analyzes price momentum across three distinct timeframes to confirm the signal validity. Momentum Gating: A dynamic filter ensures that signals are only generated when there is sufficient underlying momentum, preventing false signals in low-volume markets. How to Use Green Cloud: Indicates a confirmed bullish trend (Signal line > Anchor base). Red Cloud: Indicates a confirmed bearish trend (Signal line < Anchor base). Bar Colors: Candles are colored to reflect the active trend state for easy visual identification.
Pine Script® indicator
by alhijji3li
Orion (Market Structure & Confluence Framework)Orion (Market Structure & Confluence Framework • Premium • Closed) Orion is a professional-grade market structure and execution framework designed for serious intraday traders who want clarity, precision, and discipline — not signal spam. This indicator was developed and refined through extensive live trading and backtesting in Natural Gas, one of the most volatile and difficult markets to master. While NG was the primary proving ground, Orion is market-agnostic and works across commodities, stocks, indices, forex, and crypto. What Orion Does Orion continuously evaluates higher-timeframe structure and lower-timeframe execution conditions, then only presents trade opportunities when conditions are clean, aligned, and favorable. It helps traders: Capture large directional moves Participate in confirmed reversals Stand down during choppy or mean-reversion days Avoid overtrading and noise Trade signals are intentionally selective. When signals are mixed, Orion does nothing — by design. Core Concepts (High Level) Market Structure Context Determines whether the market environment is bullish, bearish, or mixed. Key Levels & Structural Zones User-defined levels are evaluated based on how price last interacted with them to determine bias and probable targets. Trendlines (Manual, Human-Defined) Orion interprets price interaction with trader-drawn trendlines, preserving human discretion and avoiding unreliable auto-drawn logic. Confluence Logic Signals only appear when multiple independent factors agree. No alignment = no trade. Trade Signals (When Appropriate) Based on extensive testing, signal days have historically been profitable roughly 80% of the time (about 4 out of 5 days), with an emphasis on capturing meaningful market moves, not scalping. Ease of Use Simple initial setup (define key levels, draw trendlines) Minimal upkeep (occasional adjustments as structure evolves) Once set, Orion handles the heavy lifting This is not a fully automated system. It is a decision-support tool that rewards discipline, patience, and proper risk management. Transparency & Risk No guarantees are made Losses are part of trading Stop losses and position sizing are essential Results depend on trader discipline and execution Educational resources on trendlines and support/resistance (e.g., creators like Tori Trades or WyseTrade) can be helpful for newer users. Support & Mentorship 24/7 support included for all users A limited number of users, upon request, may receive direct mentorship from the creator The creator combined personal trading experience, discretionary strategy design, and AI-assisted development to build Orion, and trades Natural Gas profitably using this framework. Pricing $99.99 per year One solid trading day can easily justify the cost. Who Orion Is For ✅ Serious intraday traders ✅ Structure-focused traders ✅ Traders who value quality over quantity ❌ Beginners seeking guaranteed signals ❌ Fully automated trading seekers © 2026 Gordon Edwards. All rights reserved. Licensed for individual use only. Redistribution, resale, or reverse engineering is prohibited.
Pine Script® indicator
by gedwards1992
Multi-indicator Signal Builder [Skyrexio]Overview Multi-Indicator Signal Builder is a versatile, all-in-one script designed to streamline your trading workflow by combining multiple popular technical indicators under a single roof. It features a single-entry, single-exit logic, intrabar stop-loss/take-profit handling, an optional time filter, a visually accessible condition table, and a built-in statistics label. Traders can choose any combination of 12+ indicators (RSI, Ultimate Oscillator, Bollinger %B, Moving Averages, ADX, Stochastic, MACD, PSAR, MFI, CCI, Heikin Ashi, and a “TV Screener” placeholder) to form entry or exit conditions. This script aims to simplify strategy creation and analysis , making it a powerful toolkit for technical traders. Indicators Overview RSI (Relative Strength Index) Measures recent price changes to evaluate overbought or oversold conditions on a 0–100 scale. Ultimate Oscillator (UO) Uses weighted averages of three different timeframes, aiming to confirm price momentum while avoiding false divergences. Bollinger %B Expresses price relative to Bollinger Bands, indicating whether price is near the upper band (overbought) or lower band (oversold). Moving Average (MA) Smooths price data over a specified period. The script supports both SMA and EMA to help identify trend direction and potential crossovers. ADX (Average Directional Index) Gauges the strength of a trend (0–100). Higher ADX signals stronger momentum, while lower ADX indicates a weaker trend. Stochastic Compares a closing price to a price range over a given period to identify momentum shifts and potential reversals. MACD (Moving Average Convergence/Divergence) Tracks the difference between two EMAs plus a signal line, commonly used to spot momentum flips through crossovers. PSAR (Parabolic SAR) Plots a trailing stop-and-reverse dot that moves with the trend. Often used to signal potential reversals when price crosses PSAR. MFI (Money Flow Index) Similar to RSI but incorporates volume data. A reading above 80 can suggest overbought conditions, while below 20 may indicate oversold. CCI (Commodity Channel Index) Identifies cyclical trends or overbought/oversold levels by comparing current price to an average price over a set timeframe. Heikin Ashi A type of candlestick charting that filters out market noise. The script uses a streak-based approach (multiple consecutive bullish or bearish bars) to gauge mini-trends. TV Screener A placeholder condition designed to integrate external buy/sell logic (like a TradingView “Buy” or “Sell” rating). Users can override or reference external signals if desired. Unique Features Multi-Indicator Entry and Exit You can selectively enable any subset of 12+ classic indicators, each with customizable parameters and conditions. A position opens only if all enabled entry conditions are met, and it closes only when all enabled exit conditions are satisfied, helping reduce false triggers. Single-Entry / Single-Exit with Intrabar SL/TP The script supports a single position at a time. Once a position is open, it monitors intrabar to see if the price hits your stop-loss or take-profit levels before the bar closes, making results more realistic for fast-moving markets. Time Window Filter Users may specify a start/end date range during which trades are allowed, making it convenient to focus on specific market cycles for backtesting or live trading. Condition Table and Statistics A table at the bottom of the chart lists all active entry/exit indicators. Upon each closed trade, an integrated statistics label displays net profit, total trades, win/loss count, average and median PnL, etc. Seamless Alerts and Automation • Configure alerts in TradingView using “Any alert() function call.” • The script sends JSON alert messages you can route to your own webhook. • The indicator can be integrated with Skyrexio alert bots to automate execution on major cryptocurrency exchanges. Optional MA/PSAR Plots For added visual clarity, optionally plot the chosen moving averages or PSAR on the chart to confirm signals without stacking multiple indicators. Methodology Multi-Indicator Entry Logic When multiple entry indicators are enabled (e.g., RSI + Stochastic + MACD), the script requires all signals to align before generating an entry. Each indicator can be set for crossovers, crossunders, thresholds (above/below), etc. This “AND” logic aims to filter out low-confidence triggers. Single-Entry Intrabar SL/TP • One Position At a Time: Once an entry signal triggers, a trade opens at the bar’s close. • Intrabar Checks: Stop-loss and take-profit levels (if enabled) are monitored on every tick. If either is reached, the position closes immediately, without waiting for the bar to end. Exit Logic All Conditions Must Agree: If the trade is still open (SL/TP not triggered), then all enabled exit indicators must confirm a closure before the script exits on the bar’s close. Time Filter Optional Trading Window: You can activate a date/time range to constrain entries and exits strictly to that interval. Justification of Methodology Indicator Confluence: Combining multiple tools (RSI, MACD, etc.) can reduce noise and false signals. Intrabar SL/TP: Capturing real-time spikes or dips provides a more precise reflection of typical live trading scenarios. Single-Entry Model: Straightforward for both manual and automated tracking (especially important in bridging to bots). Custom Date Range: Helps refine backtesting for specific market conditions or to avoid known irregular data periods. How to Use Add the Script to Your Chart • In TradingView, open Indicators , search for “Multi-indicator Signal Builder” . • Click to add it to your chart. Configure Inputs • Time Filter: Set a start and end date for trades. • Alerts Messages: Input any JSON or text payload needed by your external service or bot. • Entry Conditions: Enable and configure any indicators (e.g., RSI, MACD) for a confluence-based entry. • Close Conditions: Enable exit indicators, along with optional SL (negative %) and TP (positive %) levels. Set Up Alerts • In TradingView, select “Create Alert” → Condition = “Any alert() function call” → choose this script. • Entry Alert: Triggers on the script’s entry signal. • Close Alert: Triggers on the script’s close signal (or if SL/TP is hit). • Skyrexio Alert Bots: You can route these alerts via webhook to Skyrexio alert bots to automate order execution on major crypto exchanges (or any other supported broker). Visual Reference • A condition table at the bottom summarizes active signals. • Statistics Label updates automatically as trades are closed, showing PnL stats and distribution metrics. Backtesting Guidelines Symbol/Timeframe: Works on multiple assets and timeframes; always do thorough testing. Realistic Costs: Adjust commissions and potential slippage to match typical exchange conditions. Risk Management: If using the built-in stop-loss/take-profit, set percentages that reflect your personal risk tolerance. Longer Test Horizons: Verify performance across diverse market cycles to gauge reliability. Example of statistic calculation Test Period: 2023-01-01 to 2025-12-31 Initial Capital: $1,000 Commission: 0.1%, Slippage ~5 ticks Trade Count: 680 (varies by strategy conditions) Win rate: 75.44% (varies by strategy conditions) Net Profit: +90.14% (varies by strategy conditions) Disclaimer This indicator is provided strictly for informational and educational purposes. It does not constitute financial or trading advice. Past performance never guarantees future results. Always test thoroughly in demo environments before using real capital. Enjoy exploring the Multi-Indicator Signal Builder! Experiment with different indicator combinations and adjust parameters to align with your trading preferences, whether you trade manually or link your alerts to external automation services. Happy trading and stay safe!
Pine Script® indicator
by Skyrexio
Trend Master [Sensai trading]Trend Master — Advanced Trend Detection Made Simple Trend Master is a powerful and highly configurable trend indicator designed for traders who want clarity, confidence, and consistency in trending markets . Instead of relying on a single signal, Trend Master combines multiple proven technical factors to determine the true market direction. By blending MACD crossovers, RSI analysis, and moving average crossovers, it filters out market noise and focuses on what really matters: the dominant trend. Why Trend Master? Markets don’t trend cleanly all the time — and that’s exactly why Trend Master stands out. The multi-factor approach dramatically reduces false signals, especially when trading higher timeframes, where trend reliability is key. Key Features ✅ Multi-Factor Trend Detection Combines MACD crossovers, RSI conditions, and moving average crossovers for robust confirmation. The trend changes when all activated indicators are alligned. ⚙️ Highly Customizable Fine-tune settings and combinations to match your trading style and market preferences. 📉 Reduced False Signals Designed to filter chop and noise. 📈 Ideal for Trending Markets Best used when markets are moving with direction and momentum. Who Is It For? Trend Master is perfect for: Trend traders Swing traders Forex, Indices, Stocks, Crypto
Pine Script® indicator
by Sensaitrading
LBMA London Gold Fix Times [Auto DST]## Overview This lightweight indicator automatically marks the **LBMA Gold Price Fixing** times on your chart using vertical lines. It is designed specifically for **XAUUSD (Gold)** traders who need to monitor institutional liquidity and volatility shifts during the London session. The indicator tracks the two key daily fixing moments: * **AM Fix:** 10:30 (London Time) * **PM Fix:** 15:00 (London Time) ## Key Features * **🌍 Auto Daylight Saving Time (DST):** Built with the `Europe/London` timezone parameter. It automatically adjusts to British Summer Time (BST) and GMT, so you never have to manually change the UTC offset settings. * **⚡ Minimalist Design:** Draws clean vertical lines without cluttering your chart with text labels. * **🎨 Fully Customizable:** You can adjust the line color, width, and style (Solid, Dashed, Dotted) for both AM and PM sessions independently. ## Why are these times important? The London Gold Fix (LBMA Gold Price) is the global benchmark for physical gold settlement. Major institutions, central banks, and mining companies settle contracts at these times. Consequently, **10:30** and **15:00** (London time) often witness: 1. Significant spikes in volatility. 2. Trend reversals or accelerations. 3. Massive volume injection. ## Usage Tips * **Timeframe:** This indicator works best on **Intraday Timeframes** (1-minute to 30-minute charts). * *Note:* It may not be visible on H1 (1-hour) charts or higher because the fix times (e.g., 10:30) occur in the middle of an hourly candle. * **Setup:** Simply add it to your chart. No timezone configuration is required; the script calculates London time internally. ## Settings * **AM Fix Color:** Default is Blue (London Morning). * **PM Fix Color:** Default is Red (London Afternoon/US Morning overlap). * **Line Style:** Choose between Solid, Dashed, or Dotted lines. 概述 (Overview) 这是一个轻量级的辅助指标，通过垂直线在图表上自动标记 LBMA 伦敦金定盘价（LBMA Gold Price Fixing） 的时刻。它是专为 XAUUSD（黄金） 交易者设计的，旨在帮助大家捕捉伦敦时段内机构流动性和市场波动的关键节点。 该指标会自动锁定每天两个核心的定盘时间： 上午定盘 (AM Fix): 10:30 (伦敦时间) 下午定盘 (PM Fix): 15:00 (伦敦时间) 主要功能 (Key Features) 🌍 自动识别夏令时 (Auto DST): 代码内置 Europe/London 时区参数。无论英国处于夏令时 (BST) 还是冬令时 (GMT)，指标都会自动精准对齐，无需用户手动调整时区设置。 ⚡ 极简主义设计: 仅绘制干净的垂直线，不显示任何文字标签，避免遮挡K线或干扰视线。 🎨 高度可定制: 您可以独立调整上午和下午定盘线的颜色、粗细以及样式（实线、虚线或点线）。 为什么要关注这两个时间点？ LBMA 伦敦金定盘价是全球实物黄金结算的基准价格。大型金融机构、中央银行和金矿公司通常会在这个时间点集中进行合约结算。因此，在伦敦时间 10:30 和 15:00 前后，市场经常会出现： 波动率瞬间激增。 短期趋势的反转或加速。 巨量成交量的涌入。 使用建议 (Usage Tips) 适用周期: 建议在 日内分时图（1分钟、5分钟、15分钟或30分钟）上使用。 注意: 在 1小时 (H1) 或更大的周期上，线条可能无法显示，因为定盘时间（如 10:30）发生在整点K线的内部，无法被单独标记。 设置方法: 加载指标即可使用。无论您本地电脑的时间设置如何，脚本内部会自动计算正确的伦敦时间。 参数设置 (Settings) AM Fix Color: 上午定盘线颜色（默认为蓝色）。 PM Fix Color: 下午定盘线颜色（默认为红色，此时往往也是美盘初期的波动高峰）。 Line Style: 线条样式选择（实线、虚线、点线）。
Pine Script® indicator
by trad7595
Vdubus Momentum Lock (Overlay)The Top Indicator: "Vdubus Momentum Lock (Overlay)" The Bottom Indicator: "Vdubus TrixStoch HMA" Purpose: Precision timing. It shows you exactly when the pullbacks happen. The Trigger Zones (48 / 52): Buy Zone (Below 48): When the Blue line dips into this zone, the market is "reloading" for a buy. Sell Zone (Above 52): When the Blue line pops into this zone, the market is "reloading" for a sell. The Confluence Circles: Green Dot ("Dip"): Appears only if HMA is Green AND Trix is Rising. This filters out bad buy signals during downtrends. Red Dot ("Rally"): Appears only if HMA is Red AND Trix is Falling. This filters out bad sell signals during uptrends. 3. The Strategy: A. Entry Logic (The Sniper) Trend Check: Is HMA 100 Green or Red? Momentum Check: Is TRIX 34 agreeing with the HMA? Trigger: Buy: Stoch K crosses under 48. Sell: Stoch K crosses over 52. Pulse Re-Entry: If Trix momentum was lost briefly but snaps back into alignment, re-enter immediately (even without a Stoch signal). B. Exit Logic (The Safety) Momentum Exit: If the TRIX slope flips against you (e.g., you are Long, but Trix turns down), CLOSE IMMEDIATELY. Hard Deck (HMA Flip): If the HMA line changes color, CLOSE EVERYTHING. This is the emergency brake.
Pine Script® indicator
by vdubus