Get started

Trend Analysis

Weekly macro trend indicator for gold using a 30-week SMAWhat this indicator does This indicator identifies the macro trend regime of gold using a simple, time-tested framework: the weekly price of gold relative to its 30-week simple moving average. It is designed to answer one question only: Is gold currently in a monetary uptrend? How it works The indicator uses weekly data and applies a 30-week SMA regime filter: Bullish (Monetary Uptrend): Gold price is above a rising 30-week SMA. Bearish (Monetary Downtrend): Gold price is below a falling 30-week SMA. Neutral (Transition): All other conditions (range-bound or early trend change). A clear on-chart label displays the current regime. How to use it Use this as the first filter before analyzing silver, miners, or relative-strength ratios. When gold is Bull, precious metals deserve attention. When gold is Bear, most precious-metal trades lose their edge. When gold is Neutral, patience is usually rewarded. Best timeframe This indicator is designed for weekly charts and macro-level decision-making. It is not intended for day trading or short-term signals. Who this is for: Investors and traders focused on macro trends Those treating gold as a monetary asset, not a short-term trade Anyone looking for a clean, objective regime filter.
Pine Script® indicator
by tradingqueen18
AlgoLevel - Price Action ToolkitAlgoLevel — Price Action Toolkit is a price-action–based analysis indicator designed to help traders better understand how price behaves around key areas, rather than relying on lagging indicators or isolated signals. The script is built on widely used price action concepts such as Supply & Demand zones, market structure (BOS / CHoCH), displacement, volume participation, and key market reference levels. These concepts are commonly studied and applied by discretionary traders across different markets. By automatically organizing these elements on the chart, AlgoLevel helps reduce manual work and chart clutter, allowing traders to focus on context, confirmation, and disciplined decision-making. When combined with proper risk management and a well-defined trading plan, the tool is intended to support consistent and structured analysis, not shortcuts or guarantees. AlgoLevel is designed for learning, analysis, and situational awareness, and can be used across any market or timeframe. AlgoLevel is built around four core price-action pillars, applied in a specific and intentional order: 1. Supply & Demand Zones (Primary Focus) 2. Zone Lifecycle: Mitigation & Retests 3. Market Structure (BOS / CHoCH) 4. Momentum & Key Market Levels (Context) It is a decision-support system that shows where price is reacting, what structure is doing, and whether momentum supports continuation or reversal. 🔶 CORE FEATURES (OVERVIEW) AlgoLevel includes the following major components: • Automated Supply & Demand zone detection with strength scoring • Smart Demand / Smart Supply zone highlighting • Zone mitigation & invalidation tracking • Price-entered zone detection (normal & Smart) • Swing market structure (HH / HL / LH / LL) • BOS & CHoCH detection • Optional ghost swings (emerging structure) • Hybrid Momentum Cloud (ATR-normalized displacement × volume) • Optional MTF momentum confluence • Key market levels: o PDH / PDL o WKH / WKL o PMH / PML • Built-in alerts + optional on-chart popup alerts • Hover tooltips on all major elements (zones, structure, levels) 🔶 1) SUPPLY & DEMAND ZONES (PRIMARY ENGINE) Supply & Demand zones are the foundation of AlgoLevel. Zones are detected on confirmed candles only, using: • Candle direction (bullish / bearish) • Relative volume vs EMA baseline • Price displacement & imbalance behavior Each zone stores: • Zone top / bottom / midpoint • Formation volume • Relative strength score • Time anchor for clean plotting & extension ✅ Smart Zones (Strength-Based Filtering) Zones are ranked relative to recent zones. Zones meeting your configured threshold (example: ≥ 60%) are highlighted as Smart Demand or Smart Supply. 🔶 2) ZONE LIFECYCLE — MITIGATION & RETEST LOGIC Zones in AlgoLevel are dynamic, not static drawings. Each zone follows a lifecycle: Formation → Active → Mitigated / Invalidated Mitigation styles: • Close — strict confirmation beyond the zone • Wick — sensitive touch behavior • Avg — average-based mitigation logic Mitigated zones are automatically removed, keeping the chart focused on relevant price areas. Price Entered Zone Detection AlgoLevel detects when price: • Enters Demand / Supply zones • Enters Smart Demand / Smart Supply zones These events can trigger: • Alerts • On-chart popup labels • Monitoring workflows 🔶 3) MARKET STRUCTURE — BOS / CHoCH CONFIRMATION After price interacts with a zone, market structure provides intent. The structure engine identifies: • HH / HL / LH / LL • BOS (Break of Structure) — continuation context • CHoCH (Change of Character) — potential reversal context Optional Ghost Swings Ghost swings show temporary emerging pivots and disappear once structure is confirmed — providing early context without repainting confirmed labels. 🔶 4) HYBRID MOMENTUM CLOUD (TREND CONTEXT) The Momentum Cloud is a bias & trend context tool, not a timing trigger. It combines: • ATR-normalized displacement • Volume-weighted momentum • EMA smoothing • Adaptive envelope expansion / contraction Optional MTF Momentum Confluence Momentum confirmation can require agreement from additional timeframes with a configurable signal count. 🔶 5) KEY MARKET LEVELS (CONTEXT & FRAMING) AlgoLevel includes widely used reference levels: • PDH / PDL — Previous Day High / Low • WKH / WKL — Previous Week High / Low • PMH / PML — Premarket High / Low • Optional VWAP These levels help frame: • Liquidity context • Reaction zones • Potential targets Example 2 🔶 6) HOVER TOOLTIPS & INTERACTIVE EXPLANATIONS (KEY UX FEATURE) AlgoLevel includes contextual hover tooltips across all major elements to make the script self-explanatory directly on the chart. When hovering over zones, structure labels, or levels, users can see: Zone Tooltips • Zone type (Demand / Supply) • Strength percentage (relative ranking) • Formation volume • Quick interpretation (strong / medium / weak context) Structure Tooltips • BOS vs CHoCH explanation • Internal vs swing structure context • Confirmation logic reference Level Tooltips • Level type (PDH, PMH, WKH, etc.) • Session or timeframe origin • Intended use as reference, not signals This allows users to understand what each element represents and why it matters without reading documentation or code. 🔶 BASIC DEMONSTRATION (CONCEPTUAL EXAMPLES) Example A — Trend Continuation from Demand 1. Momentum Cloud indicates bullish bias 2. Price pulls back into Smart Demand 3. BOS confirms continuation 4. Levels used for context & targets Example B — Reversal Context from Supply 1. Price enters Supply zone 2. CHoCH appears 3. Momentum shifts bearish 4. Zone + structure used as reversal context 🔶 USAGE & WORKFLOW (RECOMMENDED) 1️⃣ Establish bias using Momentum Cloud 2️⃣ Identify Smart Demand / Supply zones 3️⃣ Wait for price interaction 4️⃣ Confirm intent using structure 5️⃣ Use levels for context 6️⃣ Execute with personal risk rules 🔶 SETTINGS (HIGH-LEVEL GUIDE) Supply & Demand • Lookback count • Mitigation method • De-dup distance • Zone extension • Smart labels & metrics • MTF zone source Structure • Swing length • BOS / CHoCH labels • Ghost swings Momentum • EMA base • Volume & displacement lookbacks • Smoothing & envelope factor • MTF confirmation Levels • PDH / PDL • WKH / WKL • PMH / PML Alerts • Zone formed / mitigated • Zone entered • Smart zone entered • On-chart popups 🔹 HOW I USE THIS TOOL (AUTHOR WORKFLOW) This is one practical way I personally use AlgoLevel for intraday context and execution alignment. 1️⃣ Use a Lower Timeframe for Early Zone Awareness (10-Second Chart) I first monitor a very low timeframe (example: 10-second) to observe: • Where Supply and Demand zones are forming early • How price reacts inside those zones (acceptance, rejection, or clean breaks) • Which zones show higher relative strength or volume participation This helps me see micro reactions and intent before they become obvious on higher timeframes. 2️⃣ Execute Decisions on a Higher Timeframe (1-Minute Chart) Once zones are established on the lower timeframe, I shift focus to the 1-minute chart to: • Trade with cleaner structure • Reduce noise from ultra-fast price fluctuations • Use Supply/Demand zones as areas, not precise entries Execution decisions are always made on the higher timeframe, with the lower timeframe acting as context only, not a trigger. 3️⃣ Always Check Key Reference Levels Before taking any trade idea, I verify where price is relative to: • Premarket High / Low (PMH / PML) • Previous Day High / Low (PDH / PDL) • Previous Week High / Low (WKH / WKL) If price is reacting at these levels in confluence with Supply/Demand zones, the context is stronger. If not, I stay patient. 4️⃣ Use Structure & Momentum for Confirmation, Not Prediction • Swing structure (HH/HL/LH/LL, BOS, CHoCH) helps confirm whether price is continuing or shifting • The Momentum Cloud provides trend context, not entries I avoid trading against structure or momentum, even if a zone exists. 5️⃣ Risk Management Is Always User-Defined AlgoLevel does not: • Generate buy/sell signals • Define stops or targets • Guarantee outcomes Risk, position sizing, and execution rules are entirely up to the user. Zones and levels are decision areas, not guarantees. 📝 IMPORTANT NOTE This workflow is shared for educational purposes only to demonstrate how multiple timeframes, zones, structure, and levels can be combined logically. Results depend on market conditions, execution discipline, and risk management. • Zones can fail or be mitigated • Structure labels require confirmation • Momentum is context, not timing • Best results come from confluence 📝Conclusion Price action trading is widely respected for its straightforward and practical approach to understanding market behavior. This tool is designed to enhance that approach by presenting structured price-based insights in a clear and accessible way, helping traders better observe and interpret market movement. While this script provides valuable visual context and analytical support, it should be used as part of a broader trading process. Market outcomes depend on many variables, and consistent performance comes from experience, discipline, and sound decision-making over time. 🔒 How to get access This is an Invite-Only script. Follow the author’s access instructions on the publication page.
Pine Script® indicator
by AlgoLevel
Super Indicator by ShahedShort Description (one‑liner) Trend‑gated line‑breakout system for 1D charts: buy breakouts + pullback buys, ATR‑buffered stops, long target & volume‑scaled target, PDL/PDH and liquidity stats, with a light green/red background for trend. Full Description What this script does Finds buy opportunities on a line chart (close): Recent High Breakout (tiny green dot) Pullback Buy after a confirmed swing‑high break → 3–7 lower closes, then a bullish bar (tiny black dot) Flags sells only for context: Recent Low Breakout and Swing‑Low Break (tiny red dots) Applies trend gating: Signals only plot when the background is light green, i.e., when SMA20 > SMA50, SMA150, and SMA200 Background turns light red when the condition fails (no signals in red regime) Uses ATR‑buffered stops and targets: Long ATR Stop = last swing low − (ATR × multiplier) Long Target (R multiple) = entry + RR × (entry − ATR stop) Volume Target = entry + (ATR × base multiplier × Relative Volume) (Relative Volume = Today’s daily volume ÷ 30‑day average daily volume, capped between user‑defined min/max) Shows a compact, relocatable info panel (no drag—choose corner in settings): Long Stop (ATR), Short Stop (ATR) PDL (previous day low), PDH (previous day high) Today’s Volume (Millions) Avg Turnover (30‑day, Crores) Long Target, Volume Target Relative Volume (x) Draws a horizontal line at the current Long Target, automatically updating on new long entries (extends to the right). Why it’s useful Simple entries on the close (line chart) with objective structure (swing confirmation). Trend alignment by design (light green background required for signals). Risk-aware: stops use ATR buffers off confirmed swing lows/highs. Liquidity-aware: targets flex with relative volume. Clean visual layer: tiny dots, light background, compact panel. Signals & Logic (plain language) Buy (Breakout): close crosses above the recent high (lookback N). Buy (Pullback): after a swing‑high break, count 3–7 consecutive lower closes, then on the next bullish bar → buy. Sell (Context): recent low breakout or a break below the most recent swing low. Trend filter: all signals only print when SMA20 > SMA50, SMA150, SMA200 (background light green). Note: Swings use pivotlow/pivothigh on close to match a line chart. Pivots confirm after swRight bars, making stops stable (but slightly delayed). Table / Panel (what you see) Long Stop (ATR) and Short Stop (ATR) PDL / PDH (from daily timeframe) Vol Today (M) and Avg Turn 30D (Cr) Long Target (R) and Volume Target Rel Vol (x) (today’s daily volume ÷ 30D average volume) You can change the panel position via Panel Position (Top‑Left / Top‑Right / Bottom‑Left / Bottom‑Right). Inputs (key) Breakout Lookback and Repaint‑safe recent levels toggle Swing Left/Right (pivot confirmation) ATR Length and ATR Multiplier RR for Long Target (e.g., 2.0R) Volume Target base ATR Multiplier, RelVol floor/ceiling Panel Position, Panel Transparency Show Target Line, color, width Enable Pullback Buy, LL min/max, Require bullish bar Show Text Labels (BUY/SELL) Alerts BUY – Recent High Broken SELL – Recent Low Broken SELL – Swing Low Broken BUY – Pullback after Swing High Break Alerts only fire when the background is green (trend up condition). Best‑practice tips This is tuned for Daily charts. For intraday, consider adjusting: Swing Left/Right (e.g., 1–2 for faster swings) ATR Multiplier (e.g., 0.5–1.0 intraday; 1.0–1.5 if noisy) RR (start with 1.0–1.5, then explore 2.0) If you want the Volume Target to matter more or less, adjust Vol Target Base ATR Multiplier and RelVol caps. Limitations & notes No repainting of signals: pivots are confirmed before being used for stops/pullback logic. Relative Volume uses daily volumes. On non‑daily charts, values still come from the daily timeframe to stay consistent. No manual drag for the panel (Pine v4 limitation). Use the corner selector. How to present screenshots 1D chart with: Light green background, green/red dots, a black pullback buy dot. Panel in a corner (e.g., Bottom Right). Target line drawn and extending right. One screenshot with a marked pullback sequence (3–7 lower closes) and the following bullish bar entry. Suggested Tags breakout, swing, ATR, trend, volume, relative-volume, PDL, PDH, targets, risk-management, line-chart Disclaimer This script is for educational purposes. Not financial advice. Trading involves risk. Always validate on your timeframe and instruments, and combine with your execution and risk rules.
Pine Script® indicator
by Shahed9989
Dynamic Trend Ribbon [RayAlgo]The Dynamic Trend Ribbon is a trend-following tool that helps traders see market direction, trend strength, and transition points in a single visual ribbon on the price chart. Instead of reacting to every small price swing, the ribbon uses a series of moving averages to show the overall trend and its strength. This makes it easier to spot strong, weak, and neutral trends before major price moves occur. What can you see on the chart? Trend Direction & Persistence. The ribbon tracks multiple moving averages to determine whether the market is in an uptrend or a downtrend, and how likely the trend is to continue. Uptrend: Ribbon shows the designated uptrend blue color when moving averages are aligned upward. Downtrend: Ribbon shows the downtrend pink color when moving averages point downward. The trend detection is smoothed over multiple MAs, so it focuses on real market direction rather than short-term price noise. Variable Ribbon Thickness The ribbon changes thickness based on trend strength: Strong trends: Thicker ribbon, giving a clear visual cue. Weak trends: Thinner ribbon, signaling reduced momentum or trend uncertainty. This makes it easy to see at a glance how strong the current trend is. Neutral Zone (Optional) The Neutral Zone highlights periods where the ribbon’s moving averages are tightly compressed, indicating sideways or indecisive markets. This feature can be toggled on or off independently, so you can choose whether to show neutral periods or keep the ribbon focused only on active trends. Customizable Moving Average Types Users can select the type of moving average used for the ribbon: EMA (Exponential Moving Average) SMA (Simple Moving Average) WMA (Weighted Moving Average) HMA (Hull Moving Average) This lets traders adjust the ribbon to their style and timeframe. Faster-moving averages for quick reactions or smoother averages for longer-term trends.

 Settings Designed for Flexibility The Trend Alignment Ribbon includes options to: Enable or disable the Neutral Zone Choose MA type independently of other settings These controls let traders fine-tune the ribbon for different market conditions and trading approaches. How Traders Can Use It (Summary) Identify strong trends at a glance Avoid noise from minor pullbacks or reversals Spot early trend transitions and neutral markets Match trend strength to entry and exit decisions Disclaimer This indicator is an analytical and educational tool only. It does not provide financial advice or trade recommendations. All signals, levels, and visual elements are meant to assist in market analysis and must be used alongside proper risk management and independent decision-making. Trading involves risk, and past performance does not guarantee future results.
Pine Script® indicator
by Ray_Algo
HTF Liquidity Pool + LTF Entry (SMC)HTF Liquidity Pool + LTF Entry (SMC) – TradingView Script Description Type: Indicator (SMC / Smart Money Concepts) Timeframes Supported: Any, but HTF/TF configurable Markets: Gold (XAU/USD), Forex, Crypto, Indices ⸻ Overview The HTF Liquidity Pool + LTF Entry (SMC) indicator is designed for traders who follow Smart Money Concepts (SMC). It identifies potential high-probability buy and sell entries based on: 1. High Timeframe (HTF) liquidity pools – areas where stop-hunts and liquidity accumulation often occur. 2. Low Timeframe (LTF) liquidity sweeps – short-term price movements that trigger Break of Structure (BOS) signals. The combination of HTF liquidity zones and LTF liquidity sweeps allows traders to enter trades in alignment with market structure, improving timing and risk management. ⸻ Features 1. HTF Liquidity Pools • Detects equal highs/lows on a chosen HTF (configurable, default: 60 minutes). • Plots Buy Liquidity (red line) and Sell Liquidity (green line) zones. 2. LTF Liquidity Sweeps • Detects short-term liquidity sweeps (configurable lookback). • Waits for a Break of Structure (BOS) to confirm entries. 3. Buy & Sell Signals • Buy Signal: Price sweeps lower liquidity and closes above BOS. • Sell Signal: Price sweeps higher liquidity and closes below BOS. • Signals are displayed on the chart with green/red labels. 4. SL/TP Visualization • Automatic Stop Loss (SL) and Take Profit (TP) levels plotted for each trade. • Default: SL = 5.04 points, Reward/Risk ratio = 2 (configurable). 5. Alert Ready • Alert conditions included for both Buy and Sell signals. • Can be used with TradingView alerts for real-time notifications. Setting Description HTF for Liquidity (htfTf) Timeframe to detect HTF liquidity pools (default: 60) HTF Equal High/Low Lookback Number of bars to detect equal highs/lows Equal Level Tolerance (eqTolerance) Price tolerance for HTF equal highs/lows LTF Liquidity Sweep Lookback Lookback period for LTF liquidity sweeps LTF BOS Lookback Lookback period for detecting Break of Structure SL Points (slPoints) Stop Loss in points (default: 5.04 for Gold) Reward/Risk Ratio (rewardRR) TP = SL × RR (default: 2) How to Use 1. Identify HTF Liquidity Zones: • Red lines = buy liquidity (price likely to be absorbed before going higher) • Green lines = sell liquidity (price likely to be absorbed before going lower) 2. Wait for LTF Liquidity Sweep and BOS: • Look for price to sweep liquidity and close beyond BOS to confirm a signal. 3. Trade with Visualized SL/TP: • Enter at Buy/Sell signal. • Place Stop Loss and Take Profit at plotted levels. 4. Set Alerts: • Use the included alertcondition() for Buy Signal Alert or Sell Signal Alert for real-time notifications. Notes / Disclaimer • Designed for educational and informational purposes only. • Always manage your risk carefully; the default SL/TP is for guidance. • Backtest before using in live markets. • Works best on Gold (XAU/USD), but can be applied to Forex, Crypto, or Indices. • Use multiple timeframes for best accuracy (HTF + LTF alignment). ⸻ Happy Trading! ⚡ “Follow the liquidity, respect structure, and trade smart money concepts.”
Pine Script® indicator
by dogtrades
Daily Trend Scanner Plus█ DAILY TREND SCANNER PLUS A professional-grade trading indicator designed to help traders quickly identify intraday trend bias across multiple symbols by tracking price relationships to key technical levels: Prior Day High/Low (PDH/PDL) and Pre-Market High/Low (PMH/PML). █ FEATURES ► Single Symbol Table Compact 5-column table displaying PDH, PMH, PDL, PML, and Trend status for the current chart symbol. Shows green dot (🟢) when price breaks above high levels and red dot (🔴) when price breaks below low levels. Progress bars visualize how close price is to breaking key levels. ► Multi Symbol Table Monitor up to 20 tickers simultaneously in a single table. Each row displays ticker name, price, change %, breakout dots, progress bars, and trend status. Optional columns for actual PMH/PML and PDH/PDL price values. Real-time updates for all symbols with color-coded change percentages. ► Table Sorting - None - Displays tickers in input order - Chg % - Sorts by daily change percentage (highest to lowest) - Bullish - Prioritizes bullish setups at top - Bearish - Prioritizes bearish setups at top ► PMH/PML Lines (Pre-Market High/Low) Horizontal lines at pre-market high and low levels (4:00 AM - 9:29 AM ET). Customizable line styles, colors, labels, and optional price display. ► PDH/PDL Lines (Prior Day High/Low) Horizontal lines at previous trading day's high and low. Uses RTH only for stocks (9:30 AM - 4:00 PM ET) and full 24-hour day for non equities. ► ORB Lines (Opening Range Breakout) Captures high and low during the opening period with 5-minute, 10-minute, or 30-minute options. Lines persist from market open until next pre-market session. ► EMA Overlays Three independent EMAs with customizable periods (default: 8, 20, 200). Third EMA can be switched to SMA. Multiple line styles available. ► VWAP Overlay Volume Weighted Average Price with customizable line style, width, and color. █ TREND LOGIC - BULLISH: Price above BOTH Prior Day High AND Pre-Market High Indicates strong upward momentum breaking through two resistance levels - BEARISH: Price below BOTH Prior Day Low AND Pre-Market Low Indicates strong downward momentum breaking through two support levels - NEUTRAL: Price not above both highs or below both lows Price is consolidating between key levels █ PROGRESS BARS Visual 5-block meter showing progress from midpoint toward target level: ▓▓▓▓▓ (80-100%) → ▓▓▓▓▒ (60-80%) → ▓▓▓▒▒ (40-60%) → ▓▓▒▒▒ (20-40%) → ▓▒▒▒▒ (0-20%) Replaced with 🟢 or 🔴 when level is actually broken. █ ASSET TYPE HANDLING STOCKS: - Pre-Market: 4:00 AM - 9:29 AM Eastern - Prior Day: RTH only (9:30 AM - 4:00 PM Eastern) NON-EQUITIES: - Prior Day: Full 24-hour trading day - Automatically detected via symbol type █ RECOMMENDED SETTINGS - Chart Timeframe: 10-minute recommended for multi-table accuracy - Timeframes 60 minutes or less required for ORB functionality - Enable extended hours on chart for accurate PMH/PML on stocks █ USAGE TIPS - Use Bullish sort to find strongest breakout candidates for long trades - Use Bearish sort to find weakest stocks for short/put candidates - Progress bars help anticipate upcoming breakouts before they happen - Combine with ORB lines to confirm trend direction after market open - Watch for alignment: Price above all key levels = strongest bullish signal - PDH/PDL breaks often signal continuation of prior day's trend - PMH/PML breaks can indicate gap-fill or trend reversal setups █ INDICATOR SETTINGS █ EXAMPLE OF FULL MULTI TABLE AND SINGLE TABLE █ MULTI-TABLE SORTING █ PMH/PML, PDH/PDL, ORB LINES █ EMA AND VWAP OVERLAYS █ CUSTOMIZATION
Pine Script® indicator
by rogman
10
HTF Candle Panel (3 Closed + 1 Live) v4High Time Frame Candle Mapping Display - Automatically selects the correct higher timeframe (HTF) based on the chart timeframe - Displays previous 3 completed HTF candles + 1 developing HTF candle - Renders them as candles on the right side of the chart - Updates dynamically as you change timeframes - This is a true overlay candle panel, not just OHLC labels. - Exact HTF OHLC — price aligns perfectly with the actual HTF chart. Works (dynamically) on these time frames only. Chart Timeframe // Higher Timeframe Shown 1 second - 1 minute 15 seconds - 5 minutes 1 minute - 15 minutes 3 minutes - 30 minutes 5 minutes - 1 hour 15 minutes - 4 hours 30 minutes - 4 hours 1 hour - Daily 4 hours - Weekly NOTE: Premium TradingView needed for "Seconds" charting
Pine Script® indicator
by thaddious
Adaptive Market Structure Channel By S B PrasadAdaptive Market Structure Channel (AMSC) Institutional-Grade Trend, Volatility & Liquidity Framework Overview The Adaptive Market Structure Channel (AMSC) is a multi-engine, adaptive trading framework designed to read market structure, volatility, liquidity, and trend strength in real time. It integrates ATR-based channels, pivot structure, supply–demand zones, liquidity sweeps, multi-factor momentum, and higher-timeframe confirmation into a single, coherent visual system. AMSC is not a single-indicator strategy. It is a context-driven decision framework intended to help traders align entries with dominant trend, structural levels, and institutional activity. Core Components 1️⃣ Adaptive ATR Trend Channel Dynamic ATR-based support & resistance Automatically adjusts to volatility Color-coded trend strength (strong / weak regimes) Acts as the primary trend bias filter 2️⃣ Pivot-Based ATR Trend Channels Channels built from confirmed pivot highs and lows ATR-expanded structure, not fixed slopes Separates impulse moves from corrections Useful for trend continuation and pullback trades 3️⃣ Market Structure: Supply & Demand Zones Automatically plots fresh demand and supply zones Zones extend forward until violated Helps identify high-probability reaction areas Used as a location filter, not a standalone signal 4️⃣ Liquidity Sweep Detection (Smart Money Logic) Identifies equal high / equal low liquidity pools Detects stop-hunt style sweeps Validates sweeps only when price reacts from structure zones Prevents chasing false breakouts 5️⃣ Multi-Factor Trend Confirmation Engine Combines: EMA structure MACD momentum RSI regime VWAP positioning Optional ribbon & HMA filters Signals are generated only when a majority of factors align, avoiding single-indicator bias. 6️⃣ Volatility Context (Bollinger Bands) Provides volatility expansion / contraction context Helps distinguish trend continuation vs compression Works as a background regime filter 7️⃣ Higher Timeframe Confirmation Confirms trend using a user-selected HTF Prevents counter-trend trades during strong HTF bias Essential for intraday and swing traders 8️⃣ Session-Aware Trading Optional India, London, and New York session filters Signals only during active market participation Avoids low-liquidity false signals 9️⃣ Professional Dashboard Real-time display of: Trend direction Trend strength Factor alignment HTF bias Active zone Trade signal Session status Designed for quick decision-making, not clutter. How to Use AMSC (Best Practice) ✔ Trade in the direction of the ATR trend ✔ Enter near demand/supply within the channel ✔ Confirm with factor alignment & HTF bias ✔ Use liquidity sweeps as entry triggers, not signals alone ✔ Avoid trades during low-strength or inactive sessions AMSC performs best when used as a confluence system, not a mechanical entry-exit robot. Ideal Use Cases Intraday index trading Swing trading in trending markets Futures & FX structure-based trading Traders who prefer context over indicators What AMSC Is NOT ❌ Not a scalping toy ❌ Not a repainting indicator ❌ Not a one-click signal generator It is built for disciplined traders who understand structure and risk. Final Note AMSC is designed to think like the market, not predict it. Use it to read conditions, not chase signals. MSC — BEST CLEAN SETUP (RECOMMENDED) 🎯 Design Philosophy “Context first, signals last.” The goal is to: Read trend & structure at a glance Avoid indicator overload Let price + zones + channel do the heavy lifting 1️⃣ CORE VISUALS (KEEP ON) These are non-negotiable. 🔹 Adaptive ATR Trend Channel ✅ ON Primary trend bias Use ATR Trendline Color = ON This alone defines: Bull vs Bear Strength vs weakness 👉 If price is above channel → bullish context 👉 If price is below channel → bearish context 🔹 Pivot ATR Trend Channel ✅ ON Channel fill: ON Transparency ≥ 85 Purpose: Visualise trend slope Spot pullbacks inside trend 👉 Treat channel edges as dynamic structure, not entry signals. 🔹 Supply & Demand Zones ✅ ON Transparency: 80–85 Zones auto-expire visually when violated 👉 These are your only horizontal levels. 2️⃣ SMART FILTERS (SELECTIVE) 💧 Liquidity Sweep ✅ ON Lookback: 5 Tolerance: 0.15 ATR 👉 Use sweeps only near zones ❌ Ignore sweeps in the middle of nowhere ⏱ Session Filter ✅ ON Trade only one session India (for NSE) London (for FX) New York (for US indices) ❌ Do NOT enable multiple sessions simultaneously 🔍 Higher Timeframe (HTF) ✅ ON Intraday: Daily Swing: Weekly 👉 If HTF disagrees → no trade 3️⃣ WHAT TO TURN OFF (CRITICAL) This is where clutter dies. ❌ Bollinger Bands 🚫 OFF by default Use only when studying volatility compression Otherwise adds visual noise ❌ Full ATR Channel (Ver 15) 🚫 OFF Redundant with pivot + ATR trend Keep only one channel logic ❌ SuperTrend Channel 🚫 OFF ATR Trend Channel already covers this ❌ Pivot Levels (P, R1, S1…) 🚫 OFF Zones replace static pivots Too many horizontal lines = paralysis ❌ Previous Day / Week Levels 🚫 OFF Turn ON only for index option trading Otherwise clutter 4️⃣ MOVING AVERAGES (STRICT RULE) Keep ONLY: EMA Fast (9) EMA Slow (21) Optional: HMA → ON only for scalping ❌ Do NOT stack multiple MAs visually 5️⃣ DASHBOARD (MINIMAL MODE) 🧭 Dashboard ✅ ON Position: Top Right Text Size: Small Watch only: Trend Strength HTF Zone Signal Ignore factor numbers once confidence develops. 6️⃣ SIGNAL USAGE (DISCIPLINE RULE) ✔ Signal must appear inside a zone ✔ Signal must align with trend & HTF ✔ Signal must be during session ❌ Never take: Signals mid-channel Signals against HTF Signals during flat strength (<30%) 7️⃣ RECOMMENDED PRESETS (COPY THIS) 🔹 Intraday (Clean) Timeframe: 5m / 15m HTF: Daily Session: India / NY BB: OFF Full ATR: OFF SuperTrend: OFF Pivots: OFF 🔹 Swing (Ultra Clean) Timeframe: 1H / 4H HTF: Weekly Liquidity: ON Zones: ON Dashboard: ON (small) 8️⃣ GOLDEN RULE (MOST IMPORTANT) If you cannot explain the trade using only: Trend channel One zone One sweep Do not trade it. 🏁 FINAL VERDICT AMSC is not cluttered by design. Clutter comes from turning everything ON. Used correctly: The chart stays clean Decisions become obvious Overtrading disappears AMSC – TRADE EXECUTION RULEBOOK Framework rule: Trend → Structure → Liquidity → Entry → Risk → Exit 1️⃣ MARKET PRE-CONDITIONS (MANDATORY) ❌ NO TRADE unless ALL are TRUE ✅ Trend Filter ATR Trend Channel = Bull for longs / Bear for shorts Trend strength ≥ 40% Price must be on the correct side of the channel ✅ HTF Confirmation HTF bias must match LTF trend If HTF is neutral → NO TRADE ✅ Session Filter Trade only during active session No first 5 minutes after session open No last 15 minutes before session close 2️⃣ LOCATION RULE (MOST IMPORTANT) 🔹 Long Trades Price must be inside or just above a DEMAND zone Zone must be: Fresh (not tested more than twice) Within the Pivot ATR Channel 🔹 Short Trades Price must be inside or just below a SUPPLY zone Same freshness rules apply ❌ No zone → no trade 3️⃣ LIQUIDITY CONFIRMATION (ENTRY TRIGGER) 🔹 Long Entry Trigger At the demand zone, you must see: ✔ Sell-side liquidity sweep ✔ Sweep candle closes bullish ✔ Sweep occurs inside the zone 🔹 Short Entry Trigger At the supply zone, you must see: ✔ Buy-side liquidity sweep ✔ Sweep candle closes bearish ✔ Sweep occurs inside the zone 4️⃣ ENTRY RULE (EXECUTION) 🔵 LONG ENTRY Enter BUY when all conditions align and: Enter at: Close of the sweep candle OR 50% retrace of the sweep candle (preferred) 🔴 SHORT ENTRY Enter SELL when: Enter at: Close of the sweep candle OR 50% retrace of the sweep candle 5️⃣ STOP-LOSS RULES (NON-NEGOTIABLE) 🔻 Long SL Place SL at: Lowest point of the demand zone OR Below sweep low − 0.1 ATR (whichever is lower) 🔺 Short SL Place SL at: Highest point of the supply zone OR Above sweep high + 0.1 ATR (whichever is higher) ❌ Never trail SL early ❌ Never move SL to break-even before partial exit 6️⃣ POSITION SIZE (FIXED RISK ONLY) Risk per trade: 0.5% – 1% max If SL distance is large → reduce position size Do not widen SL to fit position 7️⃣ EXIT RULES (STRUCTURED) 🎯 TARGET 1 (T1 – Protection) At 1R Action: Book 50% Move SL to Break-Even 🎯 TARGET 2 (T2 – Structure) Next opposite zone OR Pivot ATR Channel mid-line Book 30% 🎯 FINAL EXIT (TREND FOLLOW) Exit remaining 20% when: ✔ Opposite liquidity sweep occurs ✔ Price closes beyond Pivot ATR Channel ✔ HTF bias flips ✔ Session ends 8️⃣ NO-TRADE CONDITIONS (ABSOLUTE) ❌ Trend strength < 30% ❌ Zone already tested 3+ times ❌ Liquidity sweep outside zone ❌ Entry candle is oversized (>1.8 ATR) ❌ Trade against HTF ❌ Emotional or revenge trade 9️⃣ ONE-SCREEN TRADE CHECKLIST Before clicking BUY/SELL: ✔ Trend aligned ✔ HTF aligned ✔ In session ✔ At zone ✔ Sweep confirmed ✔ SL defined ✔ R ≥ 2 possible If any answer = NO → skip trade 🔒 DISCIPLINE STATEMENT (PRINT THIS) AMSC does not pay for activity. It pays for patience, location, and discipline. 🏁 EXPECTED PERFORMANCE (REALISTIC) Win rate: 45–60% R:R average: 1:2.5 to 1:4 Drawdown: low Trade frequency: selective Adaptive Market Structure Channel — Visual Layout 5 🧭 How to READ the Chart (Left → Right) 1️⃣ Core Trend Context (FIRST thing your eyes see) ATR Trend Channel Acts as dynamic support/resistance Green = bullish regime Red = bearish regime No second trendline competing with it 👉 If price is on the wrong side → no trade 2️⃣ Pivot ATR Structure Channel (SECOND layer) Sloping channel following real swing structure Shows: Trend acceleration Healthy pullbacks Channel fill is very light (high transparency) 👉 Pullbacks inside this channel are valid 👉 Breaks outside = caution / exit 3️⃣ Supply & Demand Zones (ONLY horizontal objects) Few, wide, soft-colored zones No pivot clutter, no fibs, no grids 👉 Trades happen only here 4️⃣ Liquidity Sweep Markers (EVENT-BASED) Appears only near zones Indicates stop-hunt, not entry by itself 👉 Sweep + zone + trend = setup 👉 Sweep alone = ignore 5️⃣ Dashboard (Decision Support, not distraction) Small Corner-placed Shows only: Trend Strength HTF bias Zone Signal Session 👉 After experience, you’ll barely look at it 🚫 What You DO NOT See (Very Important) A clean AMSC chart intentionally avoids: Multiple moving averages Pivot levels (P/R/S) Too many channels Oscillator panels Bright fills or thick lines If your chart looks “busy”, something is ON that should be OFF. 🧠 Mental Model (Keep This Image in Mind) AMSC chart = 1 dynamic trend 1 structure channel 1 zone 1 liquidity event 1 decision Anything more → clutter Anything less → blind trading ✅ Final Visual Checklist (Before Trading) ✔ Chart background visible ✔ Candles clearly readable ✔ Zones visible but not loud ✔ Channel guides the eye ✔ Nothing overlaps price excessively If yes → you are trading AMSC correctly
Pine Script® indicator
by ritaprasad43
Bull-Bear with Gainer-Looser Dashboard Scanner [Chartology.AI] 🔍 Bull-Bear with Gainer-Looser Dashboard Scanner This advanced multi-symbol scanning tool provides a professional-grade dashboard for analyzing trend reversals across 40 selected tickers simultaneously. It identifies high-probability entry points using a refined engine combined with real-time Gainer & Looser performance metrics. 🟢 Bullish & Bearish Signals The scanner detects possible moment a trend shifts direction. Input Settings Signal Type: Safe Appears after a proper trend confirmation. Low frequency, fewer signals, but more reliable. Best for swing traders who want strong confirmation before entering. Signal Type: Scalping Appears frequently during small downward moves. High frequency, quick signals for short-term trades. Best for intraday Traders who want multiple opportunities in small movements. 📊 Real-Time Dashboard Metrics The Dashboard is clean, auto-sorting table at the bottom of your chart. Each cell provides critical data points for immediate decision-making: Symbol Name: Shows the ticker (e.g. XAUUSD, EURUSD). Signal Age (⏱️): Displays exactly how many candles ago the signal appeared. The dashboard automatically sorts the newest signals to the top . Intraday Strength (ROC%): Shows the percentage change from the current session's open. ▲ Green: Price is trading above the opening bell (Intraday Gainer). ▼ Red: Price is trading below the opening bell (Intraday Looser). 🚦 Key Functional Features Multi-Symbol Processing: Scans any 40 symbols in a single view. Recency Filter: The Max Bars Ago input allows you to hide "stale" signals, showing only entries that happened within your preferred window. Adaptive Grid Layout: The table dynamically wraps based on the Max Columns setting, keeping your chart workspace visible. 🧭 How to Use for Maximum Accuracy Check Signal Age: Prioritize signals that are 1–3 bars old . Signals older than 5 bars may have already reached their primary targets. Validate with ROC: A Bullish signal is much stronger if the ROC is also positive (▲). This confirms that institutional buyers are active for the day. Align Timeframes: Use the ROC Timeframe input to align the scanner with a higher timeframe (like 30m or 1H) to trade with the "Big Trend." 🕵🏻 Quick Setup Guide Select Symbols: Use the input toggles to enable/disable specific stocks. Choose Frequency: Switch to Scalping for volatile days and Safe for trending markets. Set Lookback: Adjust Max Bars Ago to 5 if you only want to see the most immediate "Hot" signals. 📊 Healthy Trading Tips Risk Small: Never risk more than 1–2% per trade. Size Smart: Adjust position size to volatility and account size. Diversify: Don’t put all money in one asset/sector. Plan Ahead: Set entry, exit, and stop‑loss before trading. Trade Less: Focus on quality setups, avoid overtrading. Use Both Analyses: Combine technical charts with fundamental news/events. Control Emotions: Stick to strategy, avoid fear/greed. Journal Trades: Record reasons, outcomes, and lessons. Stay Informed: Track economic calendars and global events. Take Breaks: Step away after wins/losses to reset. 🎯 Advanced Discipline Partial Exit: Book profits in stages (e.g., 50% at 1:1, 50% at Final Level). Check News: Avoid trading during major announcements. No Tweaks: Don’t change plan mid‑trade; wait for SL/TP. Fixed Rules: Trade with fixed risk, fixed gains. No Averaging Losses: Close bad trades, don’t add more. Keep Learning: Evolve strategy with market changes. Backtest: Practice setups until they’re second nature. Daily Routine: Pre‑market Preparation, post‑market review. Track Metrics: Win rate, average reward, expectancy, and setup performance. Respect Trend: Trade with momentum, not against it. Avoid Over‑Leverage: Keep leverage low, avoid margin unless planned. 🚫 Risk Disclaimer This content, including any tools, software, datafeeds, indicators, or scanners, is provided strictly for charting, educational, informational, and paper‑trading purposes only. It does not constitute investment advice, buy/sell recommendations, or real‑money trading strategies. Not Advisors: We are not registered as investment advisors or research analysts. Charting Only: Use is limited to testing strategies; any application to real trading is at the user’s sole risk. No Liability: No liability is accepted for financial loss or damages arising from use of these tools. High Risk: Trading and investing involve substantial risk and can result in losses beyond initial capital. ⚠️ Final Note: Trading is speculative and may not be suitable for all investors. Use only risk capital and never invest money you cannot afford to lose. ✅ Always remember🧠 my 3R Rule💡: If the money💰 is yours then, RISK⚖️, REWARD🏆 and REGRET😔 are solely yours. 🔥
Pine Script® indicator
by Chartology-AI
Continuous Trend Continuous Trend Order Block (CT-OB) Indicator This indicator is a specialized Smart Money Concepts (SMC) tool designed to identify high-probability Order Blocks (OB) based on a strict "Body-Break" vs. "Wick-Break" validation logic. Unlike standard structure indicators, it distinguishes between genuine trend continuations and simple liquidity sweeps. Key Logic & Features: Structure Validation: * Strong OB (Solid Line): Formed when the price breaks a previous structural high/low with a full candle Body Close. This signifies real institutional momentum. Weak OB (Dashed Line): Formed when the price only breaks the structure with a Wick, which is treated as an Inducement (IDM) or liquidity sweep rather than a trend change. 50% Mitigation Rule: To keep the chart clean and relevant, an Order Block is marked as "Mitigated" (turning grey) only after the price retraces and penetrates more than 50% (Equilibrium) of the OB area. Automatic TP Targets: Once an entry OB is touched, the script dynamically generates a Thick Yellow Line targeting the nearest Strong Opposite OB as a Take Profit level. Optimized Performance: Features a customizable "OB Limit" (defaulted to 40) to manage historical data and ensure a clean, clutter-free visual experience. Aesthetic Design: Uses soft, transparent colors to ensure candle visibility while maintaining professional technical clarity.
Pine Script® indicator
by rzqmd
srd786-Intraday VWAP Price Action IndicatorDISCLAIMER This Pine Script indicator does not constitute financial advice; it is just intended for educational and informational purposes. It functions as a tool for technical analysis that could help traders spot possible trading opportunities. It is crucial to remember that participating in financial markets has a number of risks that might result in large losses and are not suitable for all investors. Users are encouraged to conduct their own thorough investigation and analysis prior to using this indicator. Avoiding trading with money that one cannot afford to lose is essential. It is also advised to seek advice from a certified financial expert. Users must use suitable risk management techniques and recognize that past success does not guarantee future outcomes. Any losses, damages, or other consequences resulting from the usage of this indicator are not the author's responsibility. The user is ultimately responsible for all trading decisions, therefore using this tool is at their own risk. INTRODUCTION The “srd786-Intraday VWAP Price Action Indicator” is a sophisticated Pine Script (version 6) trading tool designed for intraday traders who focus on New York session trading hours. This indicator combines multiple technical analysis concepts including Volume Weighted Average Price (VWAP), Average True Range (ATR) for risk management, swing point detection for support/resistance identification, and momentum analysis through RSI. The primary objective is to generate high-probability long and short signals based on price action confluence with trend, momentum, and key structural levels. 1. VWAP (Volume Weighted Average Price): Shows the "fair" average price based on both price and trading volume. 2. ATR (Average True Range): Measures how much the price typically moves each day. 3. Trend Analysis: Identifies whether the market is going up, down, or sideways. 4. Momentum Indicators: Shows how strong the current price movement is. 5. Support & Resistance: Identifies key price levels where the price might stop or reverse. 6. Swing Points: Finds significant turning points in the price. This indicator is specifically optimized for the New York trading session (9:30 AM to 4:00 PM ET), making it particularly suitable for traders who focus on US market hours. It provides a complete trading framework that includes not only signal generation but also precise trade management levels including entry prices, stop-loss orders, and profit targets based on a configurable reward-to-risk ratio. The philosophy behind this indicator is confluence-based trading. Rather than relying on a single indicator or condition, it requires multiple factors to align before generating a trade signal. This approach filters out lower-probability setups and focuses only on high-quality opportunities where price action, trend direction, momentum, and key technical levels all point in the same direction. CORE CONCEPT AND METHODOLOGY Volume Weighted Average Price (VWAP) VWAP is the cornerstone of this indicator's trading methodology. Unlike a simple moving average that treats all price bars equally, VWAP incorporates volume data into its calculation, giving more weight to bars with higher trading volume. This makes VWAP a more accurate representation of the true average price where the most significant trading activity occurred. The calculation of VWAP is performed using the built-in 'ta.vwap()' function, which computes the cumulative volume-weighted average price from the beginning of the session. For intraday traders, VWAP serves as a critical reference point that indicates whether the current price is trading at a premium (above VWAP) or discount (below VWAP) relative to the session's volume-weighted average. In this indicator, the VWAP source is configurable through the 'vwapSource' parameter, with the default being HLC3 (High + Low + Close / 3). This source selection allows traders to experiment with different price types such as typical price, weighted close, or even custom sources to suit their trading style and market preferences. Average True Range (ATR) for Risk Management The Average True Range, calculated using 'ta.atr()', measures market volatility by decomposing the current range of price movement. ATR does not indicate price direction; instead, it quantifies the degree of price movement or volatility over a specified period. In this indicator, ATR serves dual purposes: determining the distance for limit orders and calculating stop-loss levels. The 'atrLength' parameter (default: 14) controls the lookback period for the ATR calculation. A shorter length makes the indicator more responsive to recent volatility, while a longer length provides a smoother average that may be more suitable for less volatile markets. The 'atrMultiplier' (default: 1.5) determines how many ATR units away the stop-loss is placed from the entry price, allowing traders to adjust their risk exposure based on current market conditions. Swing Detection and Support/Resistance Swing points represent significant turning points in price action where the market has temporarily exhausted its directional momentum. This indicator uses pivot high and pivot low calculations to identify swing highs and swing lows, which then form the basis for dynamic support and resistance levels. The 'swingLength' parameter (default: 5) defines how many bars to the left and right of a potential pivot point must be lower (for pivot highs) or higher (for pivot lows) to confirm the swing point. This lookback period helps filter out minor price fluctuations and focuses on more significant structural levels. Support and resistance levels are stored in arrays ('swingHighArray' and 'SwingLowArray'), with the most recent swing points serving as the primary reference levels. The 'srLookback' parameter (default: 20) controls the overall lookback window and also determines how many swing points to maintain in each array, ensuring that only relevant historical levels are considered. Breakout Detection When a price moves past a major support or resistance level, this is known as a price breakout. This price breakout suggests that there is a possibility of a new trend direction heading forward.Breakout detection eliminates noise, as little price fluctuations or volatility may momentarily drive prices past a threshold without authentic conviction.Detection of breakouts affirms robustness when the price above the threshold by 2%, indicating genuine market interest, and mitigates whipsaws to prevent placing trades based on transient price swings. The Breakout Tolerance parameter, set by default to 2%, regulates the breakout tolerance for the indicator. A price closure above the current high plus a minor tolerance buffer (usually 2%) indicates a potential continuation of upward movement, classified as a Bullish Breakout. Conversely, when the price closes below the recent low plus a minor tolerance buffer (usually 2%), it suggests that the price may continue to decline, which is classified as a Bearish Breakout Down. Trend Identification Trend determination is accomplished through an Exponential Moving Average (EMA) with a configurable length ('trendMaLength', default: 9). The indicator classifies trend into three states: BULLISH (price above EMA with confirmation from the previous bar), BEARISH (price below EMA with confirmation), and SIDEWAYS (price crossing or near the EMA). The EMA is chosen over simple moving averages because it responds more quickly to recent price changes while still providing enough smoothing to filter out noise. The confirmation requirement (both current and previous bar must be on the same side of the EMA) reduces false signals during periods of choppy price action. Momentum Analysis Momentum is measured using the Relative Strength Index (RSI) with a configurable length ('momentumLength', default: 9). RSI values are categorized into five states to provide nuanced momentum readings: STRONG BULL (RSI above 70), BUILDING (RSI between 55 and 70), NEUTRAL (RSI between 45 and 55), WEAKENING (RSI below 45), and STRONG BEAR (RSI below 30). This momentum categorization allows traders to distinguish between strong trending conditions (STRONG BULL/BEAR) and transitions (BUILDING/WEAKENING), providing context for trade signals and helping to avoid entering positions during momentum divergences. CONFIGURATION PARAMETERS VWAP Settings The 'vwapSource' parameter determines which price value is used in the VWAP calculation. The default value of 'hlc3' (High + Low + Close / 3) provides a balanced representation of each bar's price action. Traders can modify this to use typical price ('high + low + close / 3'), weighted close ('high + low + close + close / 4'), or other price types depending on their analytical preferences. ATR Settings The 'atrLength' parameter sets the lookback period for the Average True Range calculation. The default of 14 periods is standard across most trading platforms and timeframes, providing a good balance between responsiveness and smoothness. The 'atrMultiplier' parameter (default: 1.5) scales the ATR value to determine stop-loss distances. A multiplier of 1.5 means the stop-loss is placed 1.5 ATR units away from the entry price, providing enough buffer to accommodate normal volatility while limiting risk. Trade Settings The 'rrRatio' parameter (default: 3.0) establishes the reward-to-risk ratio for trade targets. A ratio of 2.0 means the profit target is twice the distance of the stop-loss from the entry price. The 'limitOrderDistance' parameter (default: 0.5) determines how far below (for long trades) or above (for short trades) the current close the limit order is placed, measured in ATR units. This allows traders to enter positions at better prices while waiting for pullbacks. Swing Detection Settings The 'swingLength' parameter (default: 5) controls pivot identification sensitivity. Higher values identify more significant swing points but may miss shorter-term opportunities. The 'showSwings' boolean parameter toggles the visual display of swing high and low points on the chart. Support & Resistance Settings The 'srLookback' parameter (default: 20) defines how many bars back to search for swing points and support/resistance levels. The 'breakoutTolerance' parameter (default: 0.02 or 2%) adds a small buffer to breakout detection to account for minor penetration of support/resistance levels due to price spikes or slippage. Trend & Momentum Settings The 'trendMaLength' parameter (default: 9) sets the EMA length for trend determination, while 'momentumLength' (default: 9) sets the RSI lookback period. Both should be at least 5 periods for meaningful calculations. Table Settings The 'showTable' parameter (default: true) enables the display of two information tables that provide real-time data on Indicator values and trade levels. SIGNAL GENERATION LOGIC Long Signal Conditions A long signal is generated when all the following conditions are simultaneously true: 1. Session Filter: The trade must occur during New York session hours (9:30 AM - 4:00 PM ET). 2. Trend Confirmation: The trend must be BULLISH (price above EMA with confirmation). 3. Price Position: Current price must be above VWAP, indicating bullish price action. 4. Breakout or No Resistance: Either price is breaking out above resistance level with tolerance, or there is no prior resistance level to overcome. 5. Momentum Alignment: Momentum must be either STRONG BULL or BUILDING. This confluence of conditions ensures that long trades are only taken when the market is trending higher, price is confirming strength by trading above VWAP, and momentum is supportive of continued upward movement. Short Signal Conditions A short signal is generated when all the following conditions are simultaneously true: 1. Session Filter: The trade must occur during New York session hours 2. Trend Confirmation: The trend must be BEARISH (price below EMA with confirmation) 3. Price Position: Current price must be below VWAP, indicating bearish price action 4. Breakout or No Support: Either price is breaking down below support level with tolerance, or there is no prior support level to overcome 5. Momentum Alignment: Momentum must be either STRONG BEAR or WEAKENING Similar to long signals, short trades require alignment across multiple timeframes and analytical approaches, filtering out counter-trend trades and focusing on high-probability setups. TRADE MANAGEMENT FRAMEWORK Entry Price Calculation For long trades, the limit order price is calculated as: 'Close - (ATR Value × Limit Order Distance)'. This places the entry price below the current close, allowing traders to buy on dips while maintaining a favorable entry price. For short trades, the limit order is placed above the current close: 'Close + (ATR Value × Limit Order Distance)'. The limit order distance is expressed in ATR units, making it adaptive to current volatility conditions. In more volatile markets, the limit order will be placed further from the current price, while in calmer markets, it will be closer. Stop-Loss Placement Stop-loss levels are calculated using the ATR multiplier to ensure adaptive risk management. For long trades: 'Entry Price - (ATR Value × ATR Multiplier)'. For short trades: 'Entry Price + (ATR Value × ATR Multiplier)'. This adaptive approach to stop-loss placement means that in volatile markets, stops are wider to avoid being stopped out by normal price fluctuations, while in quieter markets, stops are tighter to limit potential losses. The default multiplier of 1.5 provides approximately 1.5 times the average true range of protection. Target Price Calculation Profit targets are determined by the reward-to-risk ratio: 'Entry Price + (ATR Stop Distance × RR Ratio)' for long trades and 'Entry Price - (ATR Stop Distance × RR Ratio)' for short trades. The default ratio of 2.0 means the target is twice the distance of the stop-loss, providing a favorable risk-reward profile. New York Session Tracking The indicator includes specialized logic for tracking the New York session open price. When a new NY session begins (determined by the 'isNewNySession' variable), the current open price is recorded and maintained throughout the session. This provides a reference point for measuring intraday directional bias from the session's starting level. INFORMATION TABLES Indicators Table This table displays the current price, VWAP value, NY session open price, support level,resistance level, ATR, ATR-scaled stop distance, current trend classification, momentum state with RSI value, and breakout status. All values are color-coded based on their bullish or bearish implications. The VWAP cell is color-coded green if price is above VWAP (bullish) and red if below (bearish), providing instant visual confirmation of price's position relative to this critical level. Trade Levels Table This table shows current signal status (LONG, SHORT, or WAIT), limit order distance in ATR units, calculated limit order price, stop-loss level, and target price with the reward-to-risk ratio displayed. The signal cell is highlighted in green for long signals and red for short signals. ALERT CONDITIONS The indicator includes four alert conditions that can be configured in TradingView: 1. LONG Signal: Triggers when a long signal is generated, providing entry price, stop-loss, and target information. 2. SHORT Signal: Triggers when a short signal is generated with corresponding trade details. 3. Breakout Up: Notifies when price breaks out above resistance level. 4. Breakout Down: Notifies when price breaks down below support level. These alerts enable traders to receive notifications via TradingView's alert system without continuously monitoring the charts. USAGE EXAMPLES AND TRADING SCENARIOS Strong Bullish Trend with VWAP Support In this scenario, price has been trading above the 9-period EMA for multiple bars, confirming a bullish trend. The current price is above VWAP, indicating buyers are willing to pay a premium. A recent swing low has established a support level, and RSI is reading 65, indicating building momentum without being overextended. When price breaks above the recent swing high resistance with a 2% tolerance, the indicator generates a long signal. The trader places a limit order below the current bar's close (0.5 ATR units) and sets the stop-loss 1.5 ATR units below the entry, with a target 2.0 times the stop distance away. Short Setup During Volatile Session During a particularly volatile NY session, price gaps down below VWAP early in the day. The 9-period EMA is declining, and both current and previous bars are below it, confirming a bearish trend. The RSI has dropped to 28, indicating strong bearish momentum. A recent swing high serves as resistance, and when price breaks below the swing low support level, the indicator generates a short signal. The trader enters on a limit order placed 0.5 ATR units above the current price, with the stop-loss 1.5 ATR units above the entry and the target at a 2.0 reward-to-risk ratio. Avoiding Counter-Trend Trades Consider a scenario where price is above VWAP and the RSI reads 72 (overbought), but the price is below the 9-period EMA and the previous bar was also below the EMA. In this case, the trend is classified as BEARISH (or SIDEWAYS) despite the bullish price position relative to VWAP. The indicator will not generate a long signal because the trend condition is not met, protecting the trader from what could be a bear trap or continuation pattern. No Prior Levels Scenario At the beginning of a trading session or after significant volatility has cleared prior swing points, there may be no established support or resistance levels in the lookback window. In this case, the breakout condition 'or na(resistanceLevel)' allows long signals to be generated without requiring a resistance level to be broken, enabling traders to participate in emerging trends without waiting for prior levels to form. BEST PRACTICES AND TIPS Timeframe Selection This indicator is optimized for intraday timeframes (1-minute to 60-minute charts) and specifically for NY session trading. Higher timeframes may produce more reliable signals but fewer opportunities, while lower timeframes will generate more signals but with potentially lower reliability. Traders should backtest on their preferred timeframe before trading live. Market Conditions The indicator performs best in trending markets with clear directional bias. During ranging or sideways markets, the trend condition may oscillate frequently, and VWAP may oscillate around price, reducing signal quality. Consider filtering signals or reducing position size during low-volatility, range-bound conditions. Parameter Optimization While the default parameters have been selected for general applicability, traders should consider optimizing certain parameters for specific markets or instruments. For highly volatile instruments like crude oil or natural gas, increasing the 'atrMultiplier' to 2.0 or 2.5 may provide more appropriate risk management. For less volatile instruments like certain forex pairs, reducing the multiplier to 1.0 or 1.2 may improve signal quality. Multiple Timeframe Analysis For enhanced performance, traders can analyze the trend on a higher timeframe (such as 15-minute or hourly) while taking signals on a lower timeframe (such as 5-minute or 1-minute). This multi-timeframe approach ensures that signals are aligned with the larger trend direction. Risk Management While the indicator provides calculated stop-loss levels, traders should consider their overall position sizing and portfolio risk. The ATR-based stops provide a market-adaptive approach, but individual risk tolerance and account size should ultimately determine position sizing. The 2.0 reward-to-risk ratio is fixed but can be adjusted based on personal preferences or the specific characteristics of the instrument being traded. INTEGRATION WITH TRADINGVIEW Adding the Indicator To add this indicator to a TradingView chart, paste the code into the Pine Script editor and click "Add to Chart." The indicator will appear in the chart's sidebar and begin calculating immediately once sufficient historical data is available. Configuring Alerts To set up alerts, right-click on any of the alert conditions in the indicator's settings panel (long signal, short signal, breakout up, or breakout down) and select "Add Alert." Configure the alert frequency and notification methods (push notification, email, webhook, etc.) according to your preferences. Customization All input parameters can be adjusted through the indicator's settings panel without modifying the source code. Traders can experiment with different VWAP sources, ATR lengths and multipliers, swing detection parameters, and table display options to suit their trading style and market preferences. LIMITATIONS AND CONSIDERATIONS Session Dependency The indicator is specifically designed for NY session trading and will not generate signals outside these hours. Traders focused on other sessions or 24-hour markets may need to modify the session string to match their trading hours. Historical Data Requirements The indicator requires sufficient historical data to accurately calculate swing points and support/resistance levels. On lower timeframe charts with limited history, the initial signals may be less reliable until adequate swing points are identified. Lag in Swing Detection By definition, swing points are confirmed after the price has moved away from them, introducing some lag into support/resistance identification. Traders should be aware that the most recent swing point may not be confirmed until several bars after it occurs. Not Financial Advice This indicator is a technical analysis tool and should not be construed as financial advice. Traders are responsible for their own research and risk management decisions. Past performance of any trading system does not guarantee future results. SUMMARY The code follows a logical flow: • Version and Declaration: Pine Script version 6 indicator declaration with overlay enabled • Input Parameters: All user-configurable settings grouped by category • Session Logic: New York session tracking and open price recording • Core Calculations: VWAP, ATR, EMA, RSI, swing points • Support/Resistance Logic: Array-based storage and retrieval of swing levels • Trend and Momentum Classification: Categorization of current market state • Signal Generation: Confluence-based long and short conditions • Trade Level Calculations: Entry, stop-loss, and target pricing • Visual Plots: Hidden plots for alert data access • Information Tables: Real-time display of key values • Alert Conditions: Four configurable alert triggers This structured approach ensures clarity, maintainability, and extensibility for future modifications or enhancements.
Pine Script® indicator
by srd786
Institutional Liquidity Engine [Pointalgo]PointAlgo – Institutional Liquidity Engine is a price-overlay market structure and liquidity visualization tool designed to help traders analyze supply & demand behavior, liquidity zones, and price inefficiencies using rule-based logic inspired by modern market structure concepts. This indicator focuses on where price aggressively moved from, where liquidity may remain, and how those zones evolve over time, without generating direct buy/sell signals. The script is fully open-source, free to use, and intended strictly for educational and analytical purposes. Core Analytical Concepts : This indicator visualizes: Market structure pivot points High-volatility displacement zones Supply & demand (order-block–like) areas Liquidity mitigation behavior Fair Value Gaps (price inefficiencies) Zone lifecycle management (active vs mitigated) It does not claim to detect actual institutional orders. How the Indicator Works : Volatility-Filtered Structure Detection Uses ATR-based volatility filtering Zones are only created when price displacement exceeds normal volatility Helps reduce noise from weak or random candles Demand & Supply Zone Identification A demand zone is detected when: A pivot low forms The candle before the move is bearish Price rapidly expands upward after the pivot Volatility conditions are met These zones highlight areas where price previously reacted strongly upward. Supply Zones (Bearish) A supply zone is detected when: A pivot high forms The candle before the move is bullish Price drops aggressively after the pivot Volatility conditions are met These zones highlight areas where selling pressure previously dominated. Smart Mitigation Engine (Automatic Zone Management) One of the key design goals of this indicator is chart cleanliness. Each zone is continuously monitored: If price returns into the zone, it is considered mitigated Users can choose to: Automatically remove mitigated zones Or gray them out for historical reference Old and irrelevant zones far from price are also automatically deleted. This prevents the chart from filling with outdated boxes. Fair Value Gap (Liquidity Void) Detection Optional Fair Value Gaps (FVGs) are displayed when: Price moves so fast that wicks do not overlap The gap size exceeds a user-defined ATR threshold These gaps visually represent price inefficiencies where liquidity may be revisited. Types: 🔵 Bullish FVG 🟠 Bearish FVG Real-Time Dashboard A small dashboard displays: Active demand zones Active supply zones This provides a quick structural overview without scanning the entire chart. Customization Options Users can configure: Pivot sensitivity Zone colors Mitigation behavior Fair Value Gap visibility Minimum gap size (ATR-based) This makes the indicator adaptable across: Forex Indices Crypto Stocks Futures How to Use This Indicator This tool is best used for: Market structure analysis Supply & demand studies Liquidity mapping Confluence with price action Higher-timeframe bias alignment Recommended complementary tools: Support & Resistance Trend analysis Volume profiling Risk management rules Important Disclaimer This indicator is provided for educational and analytical purposes only. It does not provide trading signals, investment advice, or profit guarantees. Market structure and liquidity concepts are interpretive in nature. Users are solely responsible for their own trading decisions and risk management
Pine Script® indicator
by pointalgo
Liquidity Gravity Engine [Pineify]```markdown Liquidity Gravity Engine - Market Structure, Displacement, Liquidity Rails Overview Liquidity Gravity Engine is a market structure + liquidity visualization indicator designed to help you read flow , impulse , and liquidity magnets on any symbol and timeframe. Instead of relying on a single moving average, it builds a dynamic “flow ribbon” from confirmed swing structure, highlights displacement candles that create imbalance (FVG-style gaps), and projects unmitigated swing levels as liquidity rails that price often revisits. Key Features Liquid Flow Ribbon: a structure-based dynamic band that adapts to volatility. Displacement Highlighting: flags momentum candles that expand beyond ATR and form an imbalance. Liquidity Rails: extends unmitigated swing highs/lows as potential targets until swept. Trend Context: displacement is filtered using the ribbon’s smoothed centerline. How It Works Market Structure (Swings) : swing highs/lows are detected using pivot logic over your “Structure Lookback”. Pivots become confirmed only after the lookback window completes, which means historical swing points can update until they are confirmed. Flow Construction : the most recent confirmed swing high and swing low define a top and bottom boundary. Their midpoint is then smoothed with an EMA to create the “liquid” centerline. Displacement + Imbalance : a candle is considered displacement when its range expands beyond ATR(14) × Displacement Factor and it creates a simple FVG-style gap (current low above the high two bars back for bullish, or current high below the low two bars back for bearish). The bar is then filtered by being on the correct side of the smoothed flow center. Liquidity Rails : each new confirmed swing high/low can become a dotted rail. Rails extend forward and are removed once price sweeps beyond the level (mitigation), keeping the chart focused on active liquidity. Trading Ideas and Insights Use the ribbon as context : bias is stronger when price holds one side of the flow centerline. Treat displacement markers as impulse confirmation : they often appear at breakout moments or at the start of expansions. Use liquidity rails as magnets : unmitigated swing highs/lows can act as targets for continuation or mean-reversion moves. Combine structure + displacement: a sweep into a rail followed by an opposite displacement can hint at a reversal attempt. How Multiple Components Work Together This indicator is intentionally built as a single liquidity-driven workflow: Swings define structure. Structure defines the flow ribbon (trend/volatility context). The ribbon filters displacement so you see momentum that aligns with flow. Liquidity rails provide objective target zones derived from the same swing structure. The result is a cohesive view of market structure flow, institutional-style displacement, and liquidity targets without stacking multiple separate indicators. Unique Aspects Structure-first ribbon: the band is anchored to confirmed swing points, not just a price average. Imbalance-aware displacement: requires both range expansion and a gap-style condition, reducing generic “big candle” noise. Self-cleaning liquidity rails: mitigated levels are removed to keep the chart readable. How to Use Start with defaults on a clean chart. Identify the flow: price above the smoothed centerline favors bullish flow; below favors bearish flow. Watch for displacement diamonds (“D”): they often validate a push away from structure and can mark the start of a leg. Plan around rails: treat dotted lines as potential objectives and areas where reactions/sweeps can occur. Customization Structure Lookback : smaller values = more sensitive swings; larger values = cleaner, slower structure. Displacement Factor : higher values = fewer, stronger displacement bars; lower values = more signals. Show Liquidity Rails + Liquidity Lookback : control whether rails are plotted and how active levels are emphasized. Visuals : adjust bullish/bearish flow colors and liquidity line styling for your chart theme. Conclusion Liquidity Gravity Engine helps you map market structure, highlight displacement and imbalance (FVG-style) momentum, and visualize liquidity targets with rails that stay relevant until swept. Use it for trend context, breakout confirmation, and liquidity-based trade planning on forex, crypto, stocks, and indices.
Pine Script® indicator
by Pineify
Gold And Silver Macro Dashboard A weekly, macro-focused dashboard for precious metals that tracks gold’s trend plus three key relative-strength ratios: Gold/DXY, Gold/SPY, and Silver/Gold. Uses a 30-week SMA regime filter to label each series as Bull / Neutral / Bear and provides a quick “full picture” read. What this indicator does This dashboard helps you read the big picture for precious metals using a simple regime framework (weekly + 30-week SMA). It combines four signals into one view: Gold (XAUUSD) — establishes the core precious-metals trend Gold / DXY — shows whether gold is outperforming the U.S. dollar Gold / SPY — shows whether gold is outperforming U.S. equities (risk assets) Silver / Gold — shows whether risk appetite is returning inside metals (silver leadership) How it works (simple rules) Each item is classified using the same weekly regime logic: Bull: price/ratio is above a rising 30-week SMA Bear: price/ratio is below a falling 30-week SMA Neutral: everything else (transition/range) How to use it (30-second weekly scan) Start with Gold: if Gold is Bull, metals have a tailwind. Confirm with Gold/DXY: Bull means gold is beating fiat. Confirm with Gold/SPY: Bull means gold is beating risk assets. Use Silver/Gold to size aggressiveness: Bull implies reflation/confidence and often stronger silver participation. Best timeframe Designed for Weekly charts. The script can force weekly calculations, so it remains consistent even if you view other timeframes. Customization Change tickers if your preferred feed differs (OANDA spot vs futures vs ETFs). Toggle the plotted lines on/off and keep only the dashboard table if you want a cleaner screen. Important note This is a macro regime tool for orientation and context. It is not meant to time entries/exits on lower timeframes. Default symbols are: Gold: OANDA:XAUUSD Silver: OANDA:XAGUSD Dollar Index: TVC:DXY SPY: AMEX:SPY Core Rule: Gold tells you WHEN metals matter. Ratios tell you WHY and HOW aggressive to be. Bull across all four = strongest PM regime. Mixed readings = transition. Gold Bull + Silver/Gold Bear = defensive gold-led phase.
Pine Script® indicator
by tradingqueen18
Apex Wallet - Ultimate Trading Suite: All-In-One Overlay & SignaOverview The Apex Wallet All-In-One is a comprehensive professional trading toolkit designed to centralize every essential technical analysis tool directly onto your main price chart. Instead of cluttering your workspace with dozens of separate indicators, this script integrates trend analysis, volatility bands, automated chart patterns, and a multi-indicator signal engine into a single, cohesive interface. Key Modular Features: Trend Core: Features dynamic trend curves, cloud fills for momentum visualization, and a multi-timeframe dashboard (1m to 4h) to ensure you are always trading with the higher-timeframe bias. Automated Chart Structures: Automatically detects and plots Support/Resistance levels, Standard Pivot Points, Market Gaps, and Fair Value Gaps (Imbalances). Volatility & Volume: Includes professional-grade VWAP with standard deviation bands, Bollinger Bands, and a built-in Volume Delta (Raw/Net) tracker. Signal Engine: A powerful cross-logic system that generates entry signals based on RSI (QQE), MACD (Zero-cross & Relance), Stochastic, TDI, and the Andean Oscillator. Predictive Projections: A unique feature that projects current indicator slopes into future candles to help anticipate potential trend continuations or reversals. Adaptability The script includes three core presets—Scalping, Day-Trading, and Swing-Trading—which automatically adjust all internal periods (Moving Averages, Bollinger, RSI, etc.) to match your specific market speed. Visual Cleanliness Every feature is toggleable. You can display a "clean" chart with just the Trend Cloud or a "complete" workstation with signals, patterns (Doji, Engulfing), and pivot levels
Pine Script® indicator
by Apex-Wallet
Apex Wallet - Ultimate Multi-Oscillator (9-in-1) & Market TrendThe Apex Wallet Multi-Oscillator is a powerful "All-in-One" technical analysis tool designed to clean up your charts by combining nine of the most effective momentum and trend indicators into a single workspace. This script is engineered to adapt to different trading styles—Scalping, Day-Trading, or Swing-Trading—with a single click. +4 Whether you are looking for trend exhaustion, momentum shifts, or volatility breakouts, this indicator provides a clear, visual summary of market dynamics. +1 Key Features 9 Indicators in 1: Access RSI, Stochastic, StochRSI, MACD, Zero-Lag MACD, Andean Oscillator, and the Traders Dynamic Index (TDI). +1 Smart Layout Modes: Raw (Brut): Classic view with original values. +1 Stacked (Empilé): Organizes indicators into fixed vertical zones to prevent overlapping. +1 Proportional Stacking: Automatically calculates and adjusts the height of blocks based on active oscillators. +2 Trading Presets: Switch between Scalping, Day-Trading, and Swing-Trading modes. The script automatically adjusts periods and lengths (e.g., RSI 7 for Scalping vs. 21 for Swing) to match the market speed. +3 Included Oscillators Stochastic & RSI: Standard momentum tools with color-coded signals. Traders Dynamic Index (TDI): A full suite including the RSI Price Line, Signal Line, and Market Base Line with optional Bollinger Bandwidth columns. +1 MACD & Zero-Lag MACD: Includes histogram fills and trend-colored lines for faster reaction to price movement. +2 Andean Oscillator: An advanced tool to identify Bull/Bear dominance and market "Range" or "Reversal" states. Visual Signals & Alerts Market Trend: Optional visual coloring based on indicator crosses to quickly spot bullish or bearish momentum. +3 Customizable UI: High-fidelity rendering with dashed levels and proportional fills for a professional, clean interface. +1 Integrated Alerts: Pre-configured alerts for Andean Oscillator trend changes (Bullish, Bearish, or Reversal). How to use Select your Trading Mode in the settings based on your timeframe. Toggle the indicators you want to see. Use the Stacked mode if you want to keep your sub-window organized without lines crossing each other.
Pine Script® indicator
by Apex-Wallet
AURUM ATR Trailing Engine by Heruprast AURUM ATR Trailing Engine is a professional-grade trading indicator engineered for precision, consistency, and clarity — specifically optimized for Gold (XAUUSD) scalping and intraday trading. At its core, the indicator uses a smart ATR-based trailing engine that dynamically adapts to market volatility, acting as both a trend detector and an entry trigger. This allows traders to stay aligned with momentum while avoiding late or emotional entries. To enhance accuracy and reduce false signals, AURUM integrates institutional-style filters such as VWAP bias, ADX trend strength validation, price acceptance logic (anti fake-break), and time-based session control. Every component is optional and configurable, giving traders full control over aggressiveness and safety. Risk management is built directly into the system. Position size (lot) is calculated automatically based on account balance, risk percentage, and contract size — ensuring consistent risk across all trades. Entries, stop loss, take profit levels, and trade outcomes are visualized clearly on the chart, making execution and review fast and objective. Key Features Adaptive ATR Trailing Engine Dynamically follows price action and defines trend direction and entry points. VWAP Bias Filter (Optional) Aligns trades with institutional price levels. ADX Trend Strength Confirmation Filters out weak or ranging market conditions. Price Acceptance (Anti Fake-Break Logic) Reduces false breakouts and premature entries. Session-Based Trading Control (WITA) Trade only during selected high-probability market hours. Built-in Risk Management Automatic lot calculation based on account balance and risk percentage. Clear Trade Visualization Entry, Stop Loss, Take Profit, Risk-Reward, and historical profit/loss boxes displayed directly on the chart. Trade Outcome Labels (TP / SL Hit) Instantly review execution results and lot size per trade. Debug Mode (Read-Only) Real-time insight into filter states and internal logic without affecting signals. Scalper & Prop-Firm Friendly Designed for disciplined execution, low drawdown control, and rule-based trading. Heruprast 15 January 2026
Pine Script® indicator
by harur4v3