Bollinger Bands (BB)

From TradingView Wiki
Jump to: navigation, search
Language: English  • 한국어 • Русский

DEFINITION

Bollinger Bands (BB) are a widely popular technical analysis instrument created by John Bollinger in the early 1980’s. Bollinger Bands consist of a band of three lines which are plotted in relation to security prices. The line in the middle is usually a Simple Moving Average (SMA) set to a period of 20 days (The type of trend line and period can be changed by the trader; however a 20 day moving average is by far the most popular). The SMA then serves as a base for the Upper and Lower Bands. The Upper and Lower Bands are used as a way to measure volatility by observing the relationship between the Bands and price. Typically the Upper and Lower Bands are set to two standard deviations away from the SMA (The Middle Line); however the number of standard deviations can also be adjusted by the trader.

HISTORY

Bollinger Bands (BB) were created in the early 1980’s by financial trader, analyst and teacher John Bollinger. The indicator filled a need to visualize changes in volatility which is of course dynamic, however at the time of the Bollinger Band’s creation, volatility was seen as static.

CALCULATION

There are three bands when using Bollinger Bands

Middle Band  20 Day Simple Moving Average
Upper Band  20 Day Simple Moving Average + (Standard Deviation x 2)
Lower Band  20 Day Simple Moving Average - (Standard Deviation x 2)

THE BASICS

The Bollinger Bands indicator is an oscillator meaning that it operates between or within a set range of numbers or parameters. As previously mentioned, the standard parameters for Bollinger Bands are a 20 day period with standard deviations 2 steps away from price above and below the SMA line. Essentially Bollinger Bands are a way to measure and visualize volatility. As volatility increases, the wider the bands become. Likewise, as volatility decreases, the gap between bands narrows. What is done with this information is up to the trader but there are a few different patterns that one should look for when using Bollinger Bands.

WHAT TO LOOK FOR

High/Low Prices

One thing that must be understood about Bollinger Bands is that they provide a relative definition of high and low. Prices are almost always within the band. Therefore, when prices move up near the upper band or even break through the upper band, many traders would see that security as being overbought. This would preset a possible selling opportunity. Of course the opposite would also be true. When prices move down near the lower band or even break through the lower band, that secutity may be seen as oversold and a buying opportunity may be at hand.

Cycling Between Expansion and Contraction

Volatility can generally be seen as a cycle. Typically periods of time with low volatility and steady or sideways prices (known as contraction) are followed by period of expansion. Expansion is a period of time characterized by high volatility and moving prices. Periods of expansion are then generally followed by periods of contraction. It is a cycle in which traders can be better prepared to navigate by using Bollinger Bands because of the indicators ability to monitor ever changing volatility.

Price Action Confirmations

  • Because of Bollinger Bands ability to display a critically important metric (changes in volatility), the indicator is often used in conjunction with other indicators in order to perform some advanced technical analysis. A good example of this is using Bollinger Bands (oscillating) with a Trend Line (not oscillating). As the example below shows, having the two different types of indicators in agreement can add a level of confidence that the price action is moving as expected.
  • Another good example is using Bollinger Bands to confirm some classic chart patterns such as W-Bottoms. Bollinger often used Bollinger Bands to confirm the existence of W-Bottoms which are a classic chart pattern classified by Arthur Merrill.

In order for the Bollinger Bands to confirm the W-Bottom’s existence, the following four conditions must take place.

  1. A reaction low forms which may (but not always) break through the Lower Band of the Bollinger Band but it will at least be near it.
  2. Price move back around the SMA (The Middle Band)
  3. A second drop in price creates a lower low than the initial reaction low in condition 1 however; the second, new low does not break through the Lower Band.
  4. A strong move brings price back towards the Middle Band. A breakthrough of a resistance line created by the move in condition 2 may signify a potential breakout.

WALKING THE BANDS

Of course, just like with any indicator, there are exceptions to every rule and plenty of examples where what is expected to happen, does not happen. Previously, it was mentioned that price breaking above the Upper Band or breaking below the Lower band could signify a selling or buying opportunity respectively. However this is not always the case. “Walking the Bands” can occur in either a strong uptrend or a strong downtrend.

During a strong uptrend, there may be repeated instances of price touching or breaking through the Upper Band. Each time that this occurs, it is not a sell signal, it is a result of the overall strength of the move.

Likewise during a strong downtrend there may be repeated instances of price touching or breaking through the Lower Band. Each time that this occurs, it is not a buy signal, it is a result of the overall strength of the move.

Keep in mind that instances of “Walking the Bands” will only occur in strong, defined uptrends or downtrends.

SUMMARY

Bollinger Bands have now been around for three decades and are still one of the most popular technical analysis indicators on the market. That really says a lot about their usefulness and effectiveness. When used properly and in the proper perspective, Bollinger Bands can give a trader great insight into one of the greatest areas of importance which is shifts in volatility. Traders should of course be aware that Bollinger Bands are not unlike any other indicator in the sense that they are not perfect. A shift in volatility does not always been the same thing. Knowledge of the causes of these things comes from experimentation and a great deal of experience. Bollinger Bands should be used in conjunction with additional indicators or methods in order to get a better understanding of the ever changing landscape of the market. Ultimately the more pieces of the puzzle that are put together, the more confidence should be instilled in the trader.

HOW TO USE WITH TRADINGVIEW

  1. Navigate to https://www.tradingview.com/
  2. On the landing page, enter a symbol and click "Launch Chart"
  3. Within the Toolbar along the top of the chart select "Indicators" and choose the one you would like to add to your chart.
  4. To make changes to your Indicator you will need to access the Formatting Window.
  5. You can access the Formatting Window by either clicking on the Blue "Format" button in the Chart Header next to the Indicator name, or by right clicking on the Indicator in the chart itself and selecting "Format".

INPUTS

BollingerBandsInputsFixed.PNG

Length

The time period to be used in calculating the SMA which creates the base for the Upper and Lower Bands. 20 days is the default.

Source

Determines what data from each bar will be used in calculations. Close is the default.

StdDev

The number of Standard Deviations away from the SMA that the Upper and Lower Bands should be. 2 is the default.

Offset

Changing this number will move the Bollinger Bands either Forwards or Backwards relative to the current market. 0 is the default.

STYLE

BollingerBandsStyleFixed.PNG

Basis

Can toggle the visibility of the Basis as well as the visibility of a price line showing the actual current price of the Basis. Can also select the Basis' color, line thickness and line style.

Upper

Can toggle the visibility of the Upper Band as well as the visibility of a price line showing the actual current price of the Upper Band. Can also select the Upper Band's color, line thickness and line style.

Lower

Can toggle the visibility of the Lower Band as well as the visibility of a price line showing the actual current price of the Lower Band. Can also select the Lower Band's color, line thickness and line style.

Background

Toggles the visibility of a Background color within the Bands. Can also change the Color itself as well as the opacity.

PROPERTIES

BollingerBandsFixed.PNG

Last Value on Price Scale

Toggles the visibility of the Basis, Upper and Lower Band's Values on the price axis.

Arguments in Header

Toggles the visibility of the indicator's name and settings in the upper left hand corner of the chart.

Scaling

Scales the indicator to either the Right or to the Left.