PROTECTED SOURCE SCRIPT
Goldbach Trading [Plazo Sullivan Roche Capital]
GBL Intraday — Quick Manual
Core Logic (what it actually does)
Dealing Range (DR): Uses either Previous Day High–Low or a Rolling lookback to define the day’s operating range.
Goldbach Levels: Fixed percentages of DR (3, 11, 17, 29, 41, 47, 53, 59, 71, 83, 89, 97). Think of them as “attractor shelves” where price often reacts.
Signal Engine:
Sweep at the nearest Goldbach level (false break through the level, then close back).
Confluence score (0–3) from: HTF bias, VWAP side, DR mid side.
Filters: ATR health + optional session gate (+ optional VWAP-consensus gate).
→ When sweep + min-confluences + filters = BUY/SELL plot + alert.
Key Protections (why it avoids dumb trades)
ATR Minimum: Blocks signals during dead volatility. Set as % of price.
HTF Bias Modes (pick one):
Custom EMA on your chosen HTF (default 60m).
H4-200 (trend filter).
H4-20 & D-50 agreement (momentum + higher frame).
VWAP Alignment: Must be on the correct side of intraday VWAP (toggleable).
DR Midline Check: Favors trades aligned with the DR 50% “gravity line.”
Session Gate: Only fire inside chosen sessions (NY/LDN/Asia/Custom).
VWAP Consensus Badge (D/W/M): Optional gate requiring higher-frame VWAP agreement (1–3 votes). Great for filtering chop.
Best Practices (how to get paid, not played)
Timeframe: 1–5m for indices/FX; 5–15m for crypto. Signals are intraday.
Dealing Range:
PrevDay for indices/FX.
Rolling (e.g., 240 bars) if the instrument hates yesterday’s range.
Confluences: Keep Min Confluences = 2 as a default; bump to 3 when markets are whippy.
ATR: Start at 0.2–0.4% for majors/indices; raise for high-beta coins.
VWAP Consensus: Use agreeMin = 2 on trend days; relax to 1 in balanced profiles.
Kill Zones: Focus entries inside London Open and NY Open/PM bands; Asia is for lighter risk or fade-only scouts.
Avoid: News blasts (CPI/NFP/FOMC). Pause 5–10 mins before & after.
Entries & Exits (simple, repeatable)
Entry: On the bar that confirms the sweep back through the nearest Goldbach level and meets confluence and filter rules.
Stops: Just beyond the sweep extreme (few ticks past the low for longs/high for shorts).
Targets:
TP1 at ½ of DR distance back toward the midline (or 1R), take 50% off.
TP2 at the next Goldbach level or DR midline (discretion: hold if VWAP consensus supports).
Optional trailer: last swing or ATR-based.
Alerts: Use the built-in alertcondition (const messages). If you enabled dynamic alert(), set alerts once-per-bar-close.
Reading the HUD (the tiny cockpit)
HTF Bias: UP/DOWN/FLAT based on your selected mode.
VWAP Now: Above/Below intraday VWAP.
DR 50: Above/Below midline.
ATR OK: Volatility pass/fail.
Session: Open/Closed per gate.
VWAP Cons: UP/DOWN/MIX from D/W/M votes.
Parameters (golden defaults)
Min Confluences = 2
ATR Min = 0.2–0.4% (raise for volatile instruments)
VWAP consensus = 2 (gate on trend days)
Session = NY 09:30–16:00 (indices) or London/NY for FX
Proximity Tol = 0.15% of DR (increase if price barely kisses levels)
Troubleshooting (because charts misbehave)
No signals? Lower Min Confluences or ATR Min; check Session gate; widen sweep tolerance slightly.
Too many signals? Increase Min Confluences to 3; enable VWAP consensus gate; raise ATR Min.
Late entries? Use 1–3m charts and once-per-bar-close alerts; tighten tolerance.
Risk & Deployment
One instrument, one session, one setup—stack consistency, not noise.
Risk 0.25–0.75% per idea; higher only when VWAP Cons = UP/DOWN and HTF bias agrees.
For automation/backtesting, convert to a strategy and keep the same protections.
Core Logic (what it actually does)
Dealing Range (DR): Uses either Previous Day High–Low or a Rolling lookback to define the day’s operating range.
Goldbach Levels: Fixed percentages of DR (3, 11, 17, 29, 41, 47, 53, 59, 71, 83, 89, 97). Think of them as “attractor shelves” where price often reacts.
Signal Engine:
Sweep at the nearest Goldbach level (false break through the level, then close back).
Confluence score (0–3) from: HTF bias, VWAP side, DR mid side.
Filters: ATR health + optional session gate (+ optional VWAP-consensus gate).
→ When sweep + min-confluences + filters = BUY/SELL plot + alert.
Key Protections (why it avoids dumb trades)
ATR Minimum: Blocks signals during dead volatility. Set as % of price.
HTF Bias Modes (pick one):
Custom EMA on your chosen HTF (default 60m).
H4-200 (trend filter).
H4-20 & D-50 agreement (momentum + higher frame).
VWAP Alignment: Must be on the correct side of intraday VWAP (toggleable).
DR Midline Check: Favors trades aligned with the DR 50% “gravity line.”
Session Gate: Only fire inside chosen sessions (NY/LDN/Asia/Custom).
VWAP Consensus Badge (D/W/M): Optional gate requiring higher-frame VWAP agreement (1–3 votes). Great for filtering chop.
Best Practices (how to get paid, not played)
Timeframe: 1–5m for indices/FX; 5–15m for crypto. Signals are intraday.
Dealing Range:
PrevDay for indices/FX.
Rolling (e.g., 240 bars) if the instrument hates yesterday’s range.
Confluences: Keep Min Confluences = 2 as a default; bump to 3 when markets are whippy.
ATR: Start at 0.2–0.4% for majors/indices; raise for high-beta coins.
VWAP Consensus: Use agreeMin = 2 on trend days; relax to 1 in balanced profiles.
Kill Zones: Focus entries inside London Open and NY Open/PM bands; Asia is for lighter risk or fade-only scouts.
Avoid: News blasts (CPI/NFP/FOMC). Pause 5–10 mins before & after.
Entries & Exits (simple, repeatable)
Entry: On the bar that confirms the sweep back through the nearest Goldbach level and meets confluence and filter rules.
Stops: Just beyond the sweep extreme (few ticks past the low for longs/high for shorts).
Targets:
TP1 at ½ of DR distance back toward the midline (or 1R), take 50% off.
TP2 at the next Goldbach level or DR midline (discretion: hold if VWAP consensus supports).
Optional trailer: last swing or ATR-based.
Alerts: Use the built-in alertcondition (const messages). If you enabled dynamic alert(), set alerts once-per-bar-close.
Reading the HUD (the tiny cockpit)
HTF Bias: UP/DOWN/FLAT based on your selected mode.
VWAP Now: Above/Below intraday VWAP.
DR 50: Above/Below midline.
ATR OK: Volatility pass/fail.
Session: Open/Closed per gate.
VWAP Cons: UP/DOWN/MIX from D/W/M votes.
Parameters (golden defaults)
Min Confluences = 2
ATR Min = 0.2–0.4% (raise for volatile instruments)
VWAP consensus = 2 (gate on trend days)
Session = NY 09:30–16:00 (indices) or London/NY for FX
Proximity Tol = 0.15% of DR (increase if price barely kisses levels)
Troubleshooting (because charts misbehave)
No signals? Lower Min Confluences or ATR Min; check Session gate; widen sweep tolerance slightly.
Too many signals? Increase Min Confluences to 3; enable VWAP consensus gate; raise ATR Min.
Late entries? Use 1–3m charts and once-per-bar-close alerts; tighten tolerance.
Risk & Deployment
One instrument, one session, one setup—stack consistency, not noise.
Risk 0.25–0.75% per idea; higher only when VWAP Cons = UP/DOWN and HTF bias agrees.
For automation/backtesting, convert to a strategy and keep the same protections.
Protected script
This script is published as closed-source. However, you can use it freely and without any limitations – learn more here.
Disclaimer
The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by TradingView. Read more in the Terms of Use.
Protected script
This script is published as closed-source. However, you can use it freely and without any limitations – learn more here.
Disclaimer
The information and publications are not meant to be, and do not constitute, financial, investment, trading, or other types of advice or recommendations supplied or endorsed by TradingView. Read more in the Terms of Use.