Get started

Candlestick Analysis

Trap Candle ThorenFXThis tool identifies Trap Candles by combining swing structure, bias shifts, and momentum shifts. The indicator evaluates recent highs and lows to define directional bias, tracks consecutive momentum candles using a custom AO-based sequence, and triggers signals only when the trend bias flips and momentum contradicts the prevailing direction. The script uses a 20-candle swing lookback to detect the most recent Highest High and Lowest Low. When the market touches these swing extremes, the bias is updated (bullish or bearish). After a bias is confirmed, the indicator waits for a sequence of momentum candles in favor of the trend and then looks for an opposing candle to identify a trap. Trap signals are only valid if they occur away from current swing extremes, filtering noise and late entries. BUY Signal logic Price touches a swing Low to set bullish bias A minimum sequence of green momentum candles forms First red momentum candle after the sequence triggers a BUY trap Signal only prints if the swing Low is not hit again SELL Signal logic Price touches a swing High to set bearish bias A minimum sequence of red momentum candles forms First green momentum candle after the sequence triggers a SELL trap Signal only prints if the swing High is not hit again A compact table display highlights the latest active signal for quick visualization. How to use Use in trending or post-liquidity grab environments BUY traps indicate potential bearish exhaustion followed by bullish reversal SELL traps indicate potential bullish exhaustion followed by bearish reversal Combine with structure confirmation and lower-timeframe entry techniques Works best when aligned with swing bias and momentum context Avoid signals that form directly at swing extremes; this filter is already built-in but additional confluence improves reliability No indicator is 100% accurate — it’s all about understanding the logic behind the signals.
Pine Script® indicator
by shubhampk1000
Candlestick Pattern Detector with Smart Context SignalsThis indicator identifies and labels classic candlestick patterns—such as Doji, Hammer, Shooting Star, Engulfing, Morning Star, Evening Star, Piercing Line, Dark Cloud Cover, Three White Soldiers, and Three Black Crows—and automatically translates each into a directional trading bias. What makes it unique is its context-aware logic. It doesn’t just detect shapes—it interprets them based on recent market behavior. By combining candle structure ratios with a trend-recognition filter (ta.rising and ta.falling), it distinguishes whether a pattern is likely a reversal or a continuation. For example: A long-wick candle after a series of falling closes is labeled Hammer → Long. The same candle during a rising trend becomes Hanging Man → Short. The script uses adaptive thresholds instead of fixed pip distances, calculating the 5-bar simple moving average of both body size and total candle range. All pattern definitions are expressed as proportional relationships (for instance, a Doji body ≤ 10 % of average body size and total range ≥ 80 % of average). This allows the algorithm to scale automatically across instruments and timeframes. Visual outputs: Pattern name and trade direction label above or below candles Green triangles for Long setups, red for Short, Grey for neutral Built-in alerts fire once per new signal to prevent repetitive notifications This tool helps traders read price action rather than rely solely on indicators, offering an educational bridge between visual candlestick analysis and coded automation.
Pine Script® indicator
by CoachEward
Breakout ScannerThis is a Breakout Scanner that shows you the immediate trend across 4 higher timeframes for up to 10 different tickers. It calculates a score from 1 to 3 for bullish and -1 to -3 for bearish based on where price is currently at compared to the previous higher timeframe’s candle levels. When price is breaking out of the previous higher timeframe candle’s range, then it will have a score of 3 for bullish breakout or -3 for bearish breakout. When price is above the high or below the low of multiple different higher timeframe candles, you can expect price to continue the breakout and move to a new area of price range. The brighter red or green the color is, the stronger the trend is on that timeframe. When it shows a bright green or red box on the far right side of a ticker, it is notifying you that the ticker is bullish or bearish on all timeframes and trending strongly, so switch over to that chart and look to trade in the direction of that trend. The tickers, colors and time frames can be customized to suit your preference and you can also turn off as many tickers or time frames as you’d like if you want less tickers or time frames to show up on the indicator. It also includes alerts for when all timeframes are bullish or all timeframes are bearish for one ticker. Make sure to keep each timeframe set to a timeframe that is higher than your chart timeframe. Bullish Scoring & Colors If the current candle close is above the midline of the higher time frame candle, it is given a score of 1 and a dark green background. If the current candle close is above the higher timeframe candle body, then it is given a score of 2 and a medium green background. If the current candle close is above the high of the higher time frame candle, it is given a score of 3 and a bright green background. The higher the score the stronger the bullish trend and the brighter green the color will be. Bearish Scoring & Colors If the current candle close is below the midline of the higher timeframe candle, it is given a score of -1 and a dark red background. If the current candle close is below the higher timeframe candle body, then it is given a score of -2 and a medium red background. If the current candle close is below the low of the higher timeframe candle, it is given a score of -3 and a bright red background. The lower the score, the stronger the bearish trend and the brighter red the color will be. Total Score Display On the right side of the indicator table, there is a column that displays the total score by adding all the scores together so you can easily tell the overall strength of the trend across all timeframes. Wait for the trend score to be at least 75% of the possible score to trade so you can ensure you are only trading very strong trends and increase your probability of winning your trade. The total score will update according to how many time frames you have enabled in the settings. You can also turn on or off the total score count if you prefer. The default setting is off. All Timeframe Trends Agree When all of the timeframes that you have turned on are in the same direction at the same time, a green or red box will appear on the far right side of the scanner. This is a visual cue that lets you know the strongest trending markets without having to read any of the numbers. Make sure to check out the charts for the markets that have a green or red box on the far right side and look for potential trend trading opportunities. Alerts You can set alerts for when all time frames for a certain ticker are bullish or bearish. If you have some time frames turned off at the time of creating your alerts, then it will only require all time frames that are on to be all bullish or bearish to generate an alert. Make sure to set your alerts to once per bar close to ensure you don’t get premature alerts that aren’t yet valid. Best Way To Use The Scanner For best results, make sure you wait for the trend to show all bullish or all bearish at the same time and then look to trade in the direction of the strong trend. If you can be patient enough to do that, you will increase the probability of winning your trade because you are trading with the direction of the overall higher timeframe trend when the market is trending strongly and making new highs or lows. When one of the markets in the scanner shows all timeframes trending, go to that chart and see how price action is reacting to the previous higher timeframe candle levels. You can see those levels easily by adding our Higher Timeframe Candle Levels indicator to your chart and using the same timeframes as your Breakout Scanner is using. If price is holding the higher timeframe candle levels well, then look to place trades in the direction of the trend that the Breakout Scanner is showing. Other Indicators To Pair This With Use this in combination with our Higher Timeframe Candle Levels indicator so you can see all of these levels being used to calculate the trend strength scores and watch how price reacts to those levels. You should also use our Trend Strength Indicator to easily read the historical trends of price compared to the higher timeframes and use those trends to guide you on when to trade and which direction to trade. Trend Strength Indicator, Higher Timeframe Candle Levels and the Breakout Scanner all use the same levels to calculate the trend scores so they are designed to work all together to help you quickly be able to read a chart and find what direction to trade in.
Pine Script® indicator
by FriendOfTheTrend
Up vs Down Volume Compared to PriceHi team, I’ve put together a simple TradingView indicator that breaks down the last N candles into up-moves and down-moves, showing how much volume supported each side. It helps you quickly see whether the market is rallying on strong participation or just drifting higher on weak volume. The tool tracks total up-volume versus down-volume, compares their ratios, and flags when pullbacks are happening with noticeably lower volume than the prior push up — a setup that often signals a healthy continuation rather than a reversal. It also shows key metrics like total volume, price change, and up/down ratios directly on the chart for quick assessment. You’ll instantly know if you’re looking at a light-volume pullback or a heavy-volume sell-off. Let’s test it out across a few symbols and discuss any tweaks we’d like — maybe layering an EMA or VWAP filter for cleaner trend confirmation.
Pine Script® indicator
by obaid78
3D Cube Projection - √3 Diagonal3D Cube Projection - √3 Diagonal OVERVIEW This indicator implements Bradley F. Cowan's cube projection methodology from his "Four Dimensional Stock Market Structures & Cycles" work. It visualizes a 3D cube projected onto the 2D price-time chart, using the √3 (square root of 3) body diagonal as the primary analytical tool for identifying market structure and potential cycle termination points. METHODOLOGY The cube is constructed by selecting two pivot points (A and E) which form the body diagonal - the longest diagonal running through the cube's interior from one corner to the diagonally opposite corner. According to Cowan's geometric approach: - Point A = Starting pivot (low or high) - Point E = Ending pivot (opposite extreme) - Body Diagonal (A→E) = √3 × cube side length - Face Diagonal (A→C) = √2 × cube side length The script calculates the cube dimensions by: 1. Measuring the total price range from A to E 2. Dividing by √3 to determine the cube side length in price 3. Distributing the time component across three equal segments 4. Projecting the 3D structure onto the 2D chart plane FEATURES ✓ Interactive date selection for points A and E ✓ Automatic UPLEG/DOWNLEG detection ✓ All 8 cube vertices labeled (A-H) ✓ All 6 cube faces with independent color/opacity controls ✓ √3 body diagonal (red line by default) ✓ √2 face diagonal (orange line by default) ✓ Customizable cube lines, fills, and labels ✓ Information table showing key measurements VISUAL CUSTOMIZATION - Front & Back faces: Box fills for the two square faces - Side faces: Left and right vertical faces - Top & Bottom faces: Horizontal connecting faces - Each group has independent color and opacity settings - Label size and transparency fully adjustable - Cube line styles (solid, dashed, dotted) for depth perception IMPORTANT LIMITATIONS & DISCLOSURES This indicator works within the inherent constraints of projecting 3D geometry onto a 2D price-time chart: ⚠️ VISUAL APPROXIMATION: This is a visual projection tool, not a mathematically perfect 3D cube. True 3D geometry cannot be accurately represented on a 2D plane without distortion. ⚠️ TIME DISTRIBUTION: The script divides the time axis into three equal segments (total bars ÷ 3) for practical visualization. This is an approximation that prioritizes visual coherence over strict geometric accuracy. ⚠️ UNIT SCALING: Price and time use different units (dollars vs. bars), making true isometric projection impossible. The cube appears proportional on screen but the dimensions are not directly comparable. ⚠️ 2D CONSTRAINT: We only have X (time) and Y (price) axes available. The Z-axis (depth) is simulated through visual projection techniques (line styles, shading). INTENDED USE This tool is designed for traders and analysts who study Bradley Cowan's geometric market analysis methods. It helps visualize: - Market structure in geometric terms - Potential support/resistance zones at cube edges - Cycle timing relationships using √2 and √3 ratios - Harmonic price-time relationships The cube projection should be used as one component of a comprehensive analysis approach, combined with other technical tools and fundamental analysis. MATHEMATICAL FOUNDATION While the visual representation involves approximations, the core √3 relationship is mathematically sound: - For any cube, the body diagonal = √3 × side length - The face diagonal = √2 × side length - These ratios are preserved in the price dimension calculations HOW TO USE 1. Select your starting date (Point A) - typically a significant low or high 2. Select your ending date (Point E) - the opposite extreme pivot 3. The indicator automatically constructs the cube geometry 4. Analyze the cube edges, diagonals, and faces for market structure insights 5. Adjust colors and opacity to suit your chart aesthetic TECHNICAL NOTES - Works on all timeframes and instruments - Best viewed on charts with sufficient historical data - Cube updates in real-time as new bars form - Range selection is marked with vertical lines and shading - Calculator table shows Point A, Point E, side length, and bar measurements ACKNOWLEDGMENT This indicator is based on the geometric market analysis principles developed by Bradley F. Cowan. Users are encouraged to study Cowan's original works for deeper understanding of the theoretical framework. DISCLAIMER This indicator is for educational and analytical purposes only. It does not constitute financial advice. Past performance does not guarantee future results. Always conduct your own research and risk management before making trading decisions.
Pine Script® indicator
by geneclash
Doctor Analytics – EMERSON >🜂 Doctor Analytics – EMERSON > “Where probability replaces emotion.” Doctor Analytics – EMERSON > isn’t a tool — it’s a behavioral correction system for traders who refuse to gamble. Built on the Kulture Metrics / Emerson Moss framework, it combines the raw aggression of momentum with the cold precision of mathematical expectancy. This isn’t signal-hunting; it’s surgical probability alignment. Inside every calculation beats the Path-Integral Engine — Linetsky-inspired stochastic modeling that measures the expected payoff of all recent price paths, weighted by volatility and discounted through time. It watches volatility breathe, measures it, and only moves when mathematics agrees with momentum. The Kulture Metrics Dashboard transforms trading discipline into data: Tracks your live balance, dynamic risk %, and target %. Computes exact dollar risk and payoff values in real time. Enforces drawdown protection with an automatic Loss Halt Flag after two consecutive hits. Embeds compliance awareness through a Trust Bank audit watermark. While others chase trends, EMERSON > calculates the probability of continuation. Each signal passes through layered verification — trend integrity, volatility gate, and path-integral confirmation — filtering out emotional noise until only certainty remains. Benefits that dominate the screen: ⚙️ Real-time equity evolution and risk-to-reward feedback. ⚙️ Path-integral logic that aligns with professional option-pricing models. ⚙️ Adaptive volatility gating for ultra-clean confirmations. ⚙️ Visual dashboard — no spreadsheets, no hesitation, no excuses. Doctor Analytics – EMERSON > is more than an indicator; it’s a trading philosophy encoded in Pine v6. For those who understand that discipline and mathematics are the last forms of rebellion. Kulture Metrics | EMERSON — When logic meets inevitability.
Pine Script® indicator
by kulturemetrics
Quantura - Supply & Demand Zone DetectionIntroduction “Quantura – Supply & Demand Zone Detection” is an advanced indicator designed to automatically detect and visualize institutional supply and demand zones, as well as breaker blocks, directly on the chart. The tool helps traders identify key areas of market imbalance and potential reversal or continuation zones, based on price structure, volume, and ATR dynamics. Originality & Value This indicator provides a unique and adaptive method of zone detection that goes beyond simple pivot or candle-based logic. It merges multiple layers of confirmation—volume sensitivity, ATR filters, and swing structure—while dynamically tracking how zones evolve as the market progresses. Unlike traditional supply and demand indicators, this script also detects and plots Breaker Zones when previous imbalances are violated, giving traders an extra layer of market context. The key values of this tool include: Automated detection of high-probability supply and demand zones. Integration of both volume and ATR filters for precision and adaptability. Dynamic zone merging and updating based on price evolution. Identification of breaker blocks (invalidated zones) to visualize market structure shifts. Optional bullish and bearish trade signals when zones are retested. Clear, visually optimized plotting for efficient chart interpretation. Functionality & Core Logic The indicator continuously scans recent price data for swing highs/lows and combines them with optional volume and ATR conditions to validate potential zones. Demand Zones are formed when price action indicates accumulation or a strong bullish rejection from a low area. Supply Zones are created when distribution or strong bearish rejection occurs near local highs. Breaker Blocks appear when existing zones are invalidated by price, helping traders visualize potential market structure shifts. Bullish and bearish signals appear when price re-enters an active zone or breaks through a breaker block. Parameters & Customization Demand Zones / Supply Zones: Enable or disable each individually. Breaker Zones: Activate breaker block detection for invalidated zones. Volume Filter: Optional filter to only confirm zones when volume exceeds its long-term average by a user-defined multiplier. ATR Filter: Optional filter for volatility confirmation, ensuring zones form under strong momentum conditions. Swing Length: Controls the number of bars used to detect structural pivots. Sensitivity Controls: Adjustable ATR and volume multipliers to fine-tune detection responsiveness. Signals: Toggle for on-chart bullish (▲) and bearish (▼) signal plotting when price interacts with zones. Color Customization: User-defined bullish and bearish colors for both standard and breaker zones. Core Calculations Zones are detected using pivot highs and lows with a defined lookback and lookahead period. Additional filters apply if ATR and volume are enabled, requiring conditions like “ATR > average * multiplier” and “Volume > average * multiplier.” Detected zones are merged if overlapping, keeping the chart clean and logical. When price breaks through a zone, the original box is closed, and a new breaker zone is plotted automatically. Bullish and bearish markers appear when zones are retested from the opposite side. Visualization & Display Demand zones are shaded in semi-transparent bullish color (default: blue). Supply zones are shaded in semi-transparent bearish color (default: red). Breaker zones appear when previous imbalances are broken, helping to spot structural shifts. Optional arrows (▲ / ▼) indicate potential buy or sell reactions on zone interaction. Use Cases Identify institutional areas of accumulation (demand) or distribution (supply). Detect potential breakout traps and market structure shifts using breaker zones. Combine with other tools such as volume profile, EMA, or liquidity indicators for deeper confirmation. Observe retests and reactions of zones to anticipate possible reversals or continuations. Apply multi-timeframe analysis to align higher timeframe zones with lower timeframe entries. Limitations & Recommendations The indicator does not predict future price movement; it highlights structural imbalances only. Performance depends on chosen swing length and sensitivity—users should optimize parameters for each market. Works best in volatile markets where supply and demand imbalances are clearly expressed. Should be used as part of a broader trading framework, not as a standalone signal generator. Markets & Timeframes The “Quantura – Supply & Demand Zone Detection” indicator is suitable for all asset classes including cryptocurrencies, Forex, indices, commodities, and equities. It performs reliably across multiple timeframes, from intraday scalping to higher timeframe swing analysis. Author & Access Developed 100% by Quantura. Published as a Open-source script indicator. Access is free. Important This description complies with TradingView’s Script Publishing and House Rules. It clearly explains the indicator’s originality, underlying logic, functionality, and intended use without unrealistic claims or performance guarantees.
Pine Script® indicator
by Quantura
2
Engulfing StrategyThis indicator has the following key features: - Detects bullish and bearish engulfing candlestick patterns using a well-established price and body comparison logic. - Incorporates a customizable moving average filter with multiple smoothing options to confirm trend direction. - Highlights both the current and previous candles involved in the engulfing pattern by coloring them distinctly, improving visual clarity for reversal signals. - Offers an interchangeable mode allowing the user to switch between a fully automated trading strategy (entries and exits) and a simple indicator mode (signal and color visualization only). - Supports pyramiding positions and accounts for commissions and initial capital for realistic strategy testing. - Uses modern Pine Script v5 functions and syntax for reliable and efficient execution. - Provides clear visual bar colors for bullish (orange) and bearish (yellow) engulfing signals. - Allows configuration of MA type and period, adapting to various trading styles and assets. These features make it a versatile tool for traders seeking both visual confirmation and automated trade execution based on engulfing candle patterns combined with trend filtering. by @Tumiza999
Pine Script® strategy
by tumiza999
REJECTION DETECTOR🔥 CTR (Candle Terjepit - Rejection) This indicator is specifically designed to detect Rejection Candles, which are moments when the price rejects a certain level and has the potential to form a strong reversal or rapid reaction — an important signal for scalpers and price action traders. 💡 Key Concept: Rejection is a form of market reaction to areas of liquidity, support-resistance, or order block zones. Candles with long tails and small bodies indicate an imbalance between buyers and sellers, providing an early indication that the price may soon reverse. ⚙️ Key Features 🔍 Automatic Rejection Candle Detection (Buy & Sell) 🧠 Body-to-tail ratio filter for more precise signal validation 🎨 Customizable candle colors and appearance 📊 Suitable for all pairs and timeframes
Pine Script® indicator
by slametux
6
Volumemetrix Variance StrategyThe “Volumemetrix Variance Strategy” is an advanced Pine Script strategy designed to identify trade entries and exits using a combination of volume profile analysis, candle structure, and volatility filters. It constructs a dynamic volume profile over a specified lookback period to identify critical price levels such as the Point of Control (PoC), Value Area High (VAH), and Value Area Low (VAL). These levels represent zones of high trading activity that often act as support and resistance. The script smooths and adjusts these levels across different timeframes to align short-term market structure with higher-timeframe trends. It incorporates a variety of filters to exclude doji candles, detect continuation or rejection patterns, and confirm alignment with higher timeframe candle direction (e.g., 4-hour bullish or bearish bias). Trade logic is built around detecting crossovers and breakouts relative to the PoC and value areas. The system can trigger entries based on several configurable behaviors: breakout, retake, bounce, reversal, or rejection near key volume zones. It supports flexible entry conditions for long, short, or both sides of the market, as well as a range of customizable settings for time-based trading restrictions, end-of-day position closures, and alert-based data capture. For execution, the script includes integrated risk management—users can specify take-profit and stop-loss levels, enable moving (trailing) stops, and even apply a “power curve” model to dynamically adjust trailing stops using exponential decay logic that adapts to price progress. Overall, the Volumemetrix Variance Strategy is a hybrid between a quantitative volume-based strategy and a volatility-adaptive trade manager. It combines fixed range volume profiling with multi-timeframe confirmation, candle pattern validation, and adaptive exit logic. Its architecture allows for detailed trade automation, alert generation for external systems, and real-time control over parameters such as ATR scaling, entry delay, or bar confirmation. The result is a high-granularity framework for both backtesting and live execution that seeks to capture statistically favorable setups around liquidity concentration zones.
Pine Script® strategy
by gggoaaat
2
Strategy Builder v1.0.0 [BigBeluga]🔵 OVERVIEW The Strategy Builder combines advanced price-action logic, smart-money concepts, and volatility-adaptive momentum signals to automate high-quality entries and exits across any market. It blends trend recognition, market structure shifts, order block reactions, imbalance (FVG) signals, liquidity sweeps, candlestick confirmations, and oscillator-powered divergences into one cohesive engine. Whether used as a full automation workflow or as a structured confirmation framework, this strategy provides a disciplined, rules-driven method to trade with logic — not emotion. 🔵 BACKTEST WINDOW CONTROL This module allows you to restrict strategy execution to a specific historical period. Ideal for performance isolation, regime testing, and forward-walk validation. Limit Backtest Window Enabling this option activates custom date filters for the backtest engine. Start — Define the starting date & time for backtesting End — Define the ending date & time for backtesting Only trades and signals inside this window are executed Reduces computation load on large datasets Useful for testing specific market environments (e.g., bull cycles, crash periods, sideways regimes) 🔵 SIGNAL GLOSSARY (Advanced Technical Explanation) Traders can build long and short setups using up to 6 configurable entry conditions for each direction. Every condition can be set as Bullish or Bearish and mapped to any signal source — allowing deep customization Below is the full internal logic overview of every signal available in the Strategy Builder. Signals are based on trend models, volatility structures, liquidity logic, oscillator behavior, and market structure mapping. Trend Signals (Low-Lag Trend Engine) Uses a proprietary low-lag baseline + momentum gradient model to detect directional bias. Trend Signal — Momentum breaks above/below adaptive trend baseline. Trend Signal+ — Stronger trend confirmation using volatility-weighted momentum. Trend Signal Any — Triggers when any bullish/bearish trend signal appears. SmartBand & Retests (Adaptive Volatility Bands) Dynamic envelope that contracts/expands with volatility & trend strength. SmartBand Retest — Price retests dynamic band and rejects, confirming continuation. ActionWave Signals (Impulse-Pullback Engine) Tracks wave behavior, acceleration and deceleration in price. ActionWave — Detects directional impulse strength vs pullback weakness. ActionWave Cross — Momentum acceleration threshold crossed → trend ignition. Magnet Signals (Liquidity Gravity + Mean Reversion Bias) Detects zones where price is being drawn due to liquidity voids or imbalance. Magnet — Trend and liquidity pressure align, creating directional “pull.” MagnetBar Low Momentum — Low-volatility compression → pre-breakout condition. Flow Trend (Directional Flow State + ATR Envelope) Higher-timeframe bias confirmation + dynamic volatility filter. FlowTrend — Confirms major directional bias (uptrend or downtrend). FlowTrend Retest — Price tests HTF flow band and rejects → trend resume. Voltix (Volatility Expansion Pulse) Detects regime shift from quiet accumulation → trending expansion. Voltix — Breakout volatility signature, trend acceleration trigger. Candlestick Pattern (Algorithmic Price Action Recognition) Auto-recognizes meaningful reversal or continuation candle formations. Candlestick Pattern — Confirms momentum reversal/continuation via candle logic. OrderBlock Logic (Institutional Footprint System) Institutional demand/supply zone tracking with mitigation logic. Order Block Touch — Price taps institutional zone → reaction filter. Order Block Break — OB invalidation → institutional flow shift. Market Structure Engine (Swing Logic + Volume Confirmation) Tracks major swing breaks and structural reversals. BoS — Break of Structure in trend direction (continuation bias). ChoCh — Change of Character — early reversal marker. Fair Value Gaps (Imbalance & Volume Displacement) Identifies inefficiencies caused by rapid displacement moves. FVG Created — Price leaves inefficiency behind. FVG Retest — Price returns to rebalance inefficiency → reaction zone. Liquidity Events (Stop-Run & Reversal Logic) Detects stop-hunt events and liquidity sweeps. SFP — Swing failure & wick sweep → reversal confirmation. Liquidity Created — New equal highs/lows form liquidity pool. Liquidity Grab — Sweep through liquidity line followed by rejection. Support / Resistance Break Logic Adaptive zone recognition + momentum confirmation. Support/Resistance Cross — Zone decisively broken → structural shift. Pattern Breakouts (Market Geometry Engine) Tracks breakout from compression & expansion formations. Channel Break — Channel breakout → trend acceleration. Wedge Break — Break from contraction wedge → burst of momentum. Session Logic (Opening Range Behavior) Session-based volatility trigger. Session Break — Break above/below session opening range. Momentum / Reversal Oscillator Suite Oscillator-driven exhaustion & reversal signals. Nautilus Signals — Momentum reversal signature (oscillator shift). Nautilus Peak — Momentum peak → exhaustion risk. OverSold/Overbought ❖ — Extreme exhaustion zones → reversal setup. DipX Signals ✦ — Dip buy / Dip sell timing, micro-reversal engine. Advanced Divergence Engine Momentum/price disagreement layer with multi-trigger confirmation. Normal Divergence — Classic divergence reversal. Hidden Divergence — Trend continuation divergence. Multiple Divergence — Multiple divergence confirmations stacked → high confidence. 🔧 Adjustable Signal Logic Some signals in this system can be additionally refined through the strategy settings panel. This allows traders to tune internal behavior for different market regimes, assets, and volatility conditions. 🔵 LONG / SHORT EXIT CONDITIONS This section allows you to automate exits using the same advanced market conditions available for entries. Each exit rule consists of: Toggle — Enable/disable individual exit rule. Direction Filter — Trigger exit only if selected market bias appears (Bullish/Bearish). Signal Type — Choose which market event triggers the exit (same list as entry conditions). When the active conditions are met, the strategy automatically closes the current position — ensuring emotion-free risk management and systematic trade control. 🔵 TAKE PROFIT & STOP LOSS SYSTEM This strategy builder provides a fully dynamic risk-management engine designed for both systematic traders and discretionary confirmation users. Take Profit Logic Scale out of trades progressively or exit fully using algorithmic TP levels. Up to 3 Take-Profit targets available Choose TP calculation method: • ATR-based distance (volatility-adaptive targets) • %-based distance (fixed percentage from entry) Define Size — ATR multiplier or % value Custom Exit Size per TP (e.g., 25% / 25% / 50%) Visual TP plotting on chart for clarity Stop Loss Logic Automated protection logic for every trade. Two SL Modes: • Fixed Stop Loss — static SL from entry • Trailing Stop Loss — SL follows price as trade progresses Distance options: • ATR multiplier (adapts to volatility) • %-based from entry (fixed distance) SL dynamically draws on chart for transparency Trailing SL behavior: Follows price only in profitable direction Never moves against the trade Locks profits as trend develops 🔵 Strategy Dashboard A compact on-chart performance dashboard is included to help monitor live trade status and backtest results in real time. It displays key metrics: Start Capital — Initial account balance used in simulation. Position Size — % of capital allocated per trade based on user settings (It changes if the trade hits take profits, when more than one take profit is selected). Current Trade — Shows active trade direction (Long / Short) and real-time % return from entry. Closed Trades — Counter of completed positions, useful for reading sample size during testing. 🔵 CONCLUSION The Strategy Builder brings together a powerful suite of smart-money and momentum-driven signals, allowing traders to automate robust trade logic built on modern market structure concepts. With access to trend filters, order blocks, liquidity events, divergence signals, volatility cues, and session-based triggers, it provides a deeply adaptive trade engine capable of fitting many market environments.
Pine Script® strategy
by BigBeluga
13
Geometric Price-Time Triangle Calculator═══════════════════════════════════════════════════ GEOMETRIC PRICE-TIME TRIANGLE CALCULATOR ═══════════════════════════════════════════════════ Calculates Point C of a geometric triangle using different rotation angles from any selected price swing. Based on Bradley F. Cowan's Price-Time Vector (PTV) methods from "Four-Dimensional Stock Market Structures and Cycles." 📐 WHAT IT DOES ──────────────────────────────────────────────────── Select two points (A and B) on any swing, choose an angle, and the indicator calculates where Point C would be mathematically. It's just vector rotation applied to price charts. This shows you where Point C lands in both price AND time based on pure geometry - not a prediction, just a calculation. 🎯 FEATURES ──────────────────────────────────────────────────── ✓ 10 Different Angles • Gann ratios: 18.435° (1x3), 26.565° (1x2), 45° (1x1), 63.435° (2x1), 71.565° (3x1) • Other angles: 30°, 60°, 90°, 120°, 150° ✓ Visual Triangle • Adjustable colors and opacity for points A, B, C • Line styles: Solid, Dashed, Dotted • Extend lines: None, Left, Right, Both ✓ Crosshair at Point C • Shows where Point C is located • Vertical line = bar position • Horizontal line = price level ✓ Data Table • Shows all calculations • Price-to-Bar ratio • Point C location (price and bars from A/B) • Toggle on/off 🔧 HOW TO USE ──────────────────────────────────────────────────── 1. Pick your swing start date (Point A) 2. Pick your swing end date (Point B) - make sure these dates capture the actual high/low of your swing 3. Choose an angle from the dropdown 4. Look at Point C - that's where the geometry puts it Different angles = different Point C locations. Whether price actually goes there is up to the market. 📊 THE ANGLES ──────────────────────────────────────────────────── - 18.435° (1x3) - Shallow rotation - 26.565° (1x2) - Moderate rotation - 45° (1x1) - Gann's balanced ratio - 60° - Equilateral triangle (default) - 63.435° (2x1) - Steeper rotation - 71.565° (3x1) - Very steep rotation - 90° - Right angle - 120°-150° - Obtuse angles 💡 PRACTICAL USE ──────────────────────────────────────────────────── → See where geometric patterns would complete → Test if your market respects certain angles → Find where multiple angles converge → Compare projected Point C to actual price action → Use 90° to see symmetrical price/time relationships → Backtest historical swings to see what worked ⚙️ HOW IT WORKS ──────────────────────────────────────────────────── 1. Takes your AB swing 2. Calculates the BA vector (reverse direction) 3. Normalizes price and time using Price-to-Bar ratio 4. Rotates the vector by your selected angle 5. Converts back to chart coordinates Basic trigonometry. That's all it is. 📚 BACKGROUND ──────────────────────────────────────────────────── Based on Bradley F. Cowan's Price-Time Vector (PTV) concept from "Four-Dimensional Stock Market Structures and Cycles" and W.D. Gann's geometric angle analysis. Cowan observed that markets sometimes complete geometric patterns. This tool calculates where those patterns would complete mathematically. Whether price actually respects these geometric relationships is something you need to test yourself. ⚠️ IMPORTANT ──────────────────────────────────────────────────── - This is geometric calculation, not prediction - Point C shows where the math puts it, not where price will go - Some angles might work for your market, some won't - Test it yourself on historical data - Price-to-Bar Ratio stays constant regardless of angle - Don't trade based on this alone - Works on all timeframes and assets 🎨 CUSTOMIZATION ──────────────────────────────────────────────────── - Show/hide triangle - Individual colors for A, B, C points - Adjust opacity (0-100) - Line styles for each triangle side - Extend lines left/right/both/none - Show/hide data table - Crosshair color and width - Customizable table colors ═══════════════════════════════════════════════════
Pine Script® indicator
by geneclash
2
Higher Timeframe Box & Divider - All Candles [GoldnHunt]The Higher Timeframe Box & Divider – All Candles indicator visually maps higher timeframe candles onto lower timeframe charts. It highlights the open and close range of each higher timeframe candle as a box, along with a vertical divider marking the start of each new period. This helps traders clearly see higher timeframe structure and momentum flow without switching charts. Features: Draws a box showing only the body (open to close) of each higher timeframe candle. Uses candle color to represent bullish and bearish momentum. Adds a divider line for each new higher timeframe candle. Works across all symbols and timeframes. Lightweight and optimized for performance. Use case: Perfect for traders using multi-timeframe (MTF) analysis who want to visualize higher timeframe candle progression while observing lower timeframe price action.
Pine Script® indicator
by goldnhunt
Actionable Signals: Hammers, Shooters, and Inside Bars#TheStrat Actionable Signals This indicator automatically detects hammers, shooters, and inside bars, which are key reversal and continuation patterns that can signal actionable trading opportunities. These 'Actionable Signals' are based on #TheStrat methodology developed by Rob Smith. This indicator allows you to use a 'Classic' hammer/shooter definition as well as to customize hammer/shooter candle proportions to your liking. Pattern Types Classic Hammer/Shooter - Traditional pin bar pattern featuring a small body (≤30% of range) positioned at the extreme with a long dominant wick (3x+ body ratio). The most widely recognized reversal signal. Custom Hammer/Shooter - Fully adjustable pattern parameters allowing you to fine-tune detection criteria for your specific trading strategy and timeframe preferences. Paddle - Strong momentum bar with a large body (up to 85%) closing within 5% of the extreme. Identifies continuation moves with conviction. Color-validated (green hammers, red shooters). Rejection - Wick-dominant pattern showing price rejection at extremes. Features moderate body (≤60%) with strong rejection wick (≥40%). Color-agnostic for flexibility. Inside Bar - Bar contained entirely within the previous bar's range, signaling consolidation and potential breakout setups. Key Features Multi-Pattern Detection: Enable multiple pattern types simultaneously to capture different market structures Pivot Validation: Optional swing high/low requirement ensures patterns occur at meaningful inflection points Session Filtering: Restrict signals to specific trading sessions across multiple timezones Visual Clarity: Color-coded markers distinguish between pattern types (customize via Style settings) Testing Panel: Built-in debugging tool displays detailed bar analysis for fine-tuning detection parameters How to Use Default Settings: Start with Classic, Paddle, and Rejection patterns enabled for balanced signal generation Pivot Filter: Keep "Require Swing High/Low" enabled to focus on patterns at key support/resistance levels Customization: Adjust pattern strictness parameters based on your timeframe and trading style Colors: Modify marker colors and styles through the Style tab for optimal chart visibility Testing Panel: Enable to see why patterns are or aren't triggering on specific bars Please share any issues you encounter, it will help improve the script for everyone! Note: This indicator displays historical patterns and should be used as part of a comprehensive trading strategy. Past performance does not guarantee future results.
Pine Script® indicator
by SpinTrades
2
Opposing Candle V2🟩 OC (Opposing Candle) Multi–Timeframe Framework 🔍 Overview The OC Indicator automatically detects and displays Opposing Candles (OCs) across up to three timeframes. An Opposing Candle is a candle that fully engulfs the previous one, signaling a potential shift in control — either a trend continuation or a trend reversal. This multi–timeframe framework gives traders a structured way to visualize displacement, pullbacks, and momentum shifts between timeframes. ⚙️ How It Works Each OC is drawn as a box showing: High & Low → The candle’s full range Open Line (black) → Key control level Midline (white) → Candle equilibrium Optional labels for timeframe and session You can enable up to 3 timeframes (e.g., 30m / 1H / 4H) and adjust how many OCs to display for each. 📈 Trading Framework 🔹 Continuation Setup (Trend Following) 1. 4H Bias → Bullish or Bearish Identify clear trend structure (HH/HL = bullish, LH/LL = bearish). Confirm strong displacement and visible gaps between OCs — signs of momentum and healthy trend continuation. 2. 1H Confirmation OC OC forms in the direction of the 4H bias, confirming control. 3. 30min Pullback OC Opposite–colored OC appears → represents the pullback. 4. Entry Trigger A yellow candle closes beyond the 30min OC open line, confirming the end of the pullback. → Enter in trend direction. 🎯 Targets Target 1: Next 1H OC high or low (in trend direction) Target 2: Next 4H OC high or low 🛑 Stop: Beyond the 30min OC’s opposite wick 🔹 Reversal Setup (Trend Shift) 1. 4H Structure → Extended or Losing Momentum When there are no higher–timeframe gaps and no displacement, momentum weakens — often a sign of potential reversal. 2. Opposing OC Forms on HTF A strong engulfing OC appears against the previous trend at a key structural level. 3. Lower–Timeframe Alignment 1H and 30min OCs begin forming in the new direction, confirming control shift. 4. Entry Trigger Break of the lower–timeframe OC open line signals the reversal confirmation. 🟢 Example: Bullish Reversal 4H downtrend shows compression (no displacement) 4H bullish OC forms at support 30min breaks above a bearish OC’s open line → Go long 🔴 Example: Bearish Reversal 4H uptrend stalls at resistance 4H bearish OC forms 30min breaks below a bullish OC’s open line → Go short 🎯 Targets Target 1: Nearest opposing 1H OC high/low Target 2: Major 4H structural high/low 🛑 Stop: Beyond the reversal OC wick 🧠 Key Concepts Displacement = Strength. Strong, impulsive moves with clear gaps between OCs show continuation. Compression = Weakness. Overlapping candles and no HTF displacement often hint at reversal. OC = Control Candle. The open line is the “line in the sand” — when price breaks it, control flips. Multi–TF Confluence = Precision. 4H → 1H → 30m gives you structure → confirmation → entry accuracy. 🎨 Features ✅ Multi–Timeframe OC detection (default: 30m / 1H / 4H) ✅ Bullish & Bearish boxes with open and midlines ✅ Break candles highlighted yellow ✅ Optional labels (timeframe + session) ✅ Session filters (Asia, London, NYAM, NYPM) ✅ Fully customizable visuals and extension lengths
Pine Script® indicator
by JesseVisco
Volatility Resonance CandlesVolatility Resonance Candles visualize the dynamic interaction between price acceleration, volatility, and volume energy.
They’re designed to reveal moments when volatility expansion and directional momentum resonate — often preceding strong directional moves or reversals. 🔬 Concept Traditional candles display direction and range, but they miss the energetic structure of volatility itself.
This indicator introduces a resonance model, where ATR ratio, price acceleration, and volume intensity combine to form a composite signal. * ATR Resonance: compares short-term vs. long-term volatility * Acceleration: captures the rate of price change * Volume Energy: reinforces the move’s significance When these components align, the candle color “resonates” — brighter, more intense candles signal stronger volatility–momentum coupling. ⚙️ Features * Adaptive Scaling
Normalizes energy intensity dynamically across a user-defined lookback period, ensuring consistency in changing market conditions. * Power-Law Transformation
Optional non-linear scaling (gamma) emphasizes higher-energy events while keeping low-intensity noise visually subdued. * Divergence Mode
When enabled, colors can invert to highlight energy divergence from candle direction (e.g., bearish pressure during bullish closes). * Customizable Styling
Full control over bullish/bearish base colors, transparency scaling, and threshold sensitivity. 🧠 Interpretation * Bright / High-Intensity Candles → Strong alignment of volatility and directional energy.
Often signals the resonant phase of a move — acceleration backed by volatility expansion and volume participation. * Dim / Low-Intensity Candles → Energy dispersion or consolidation.
These typically mark quiet zones, pauses, or inefficient volatility. * Opposite-Colored Candles (if divergence mode on) → Potential inflection zones or hidden stress in the trend structure. ⚠️ Disclaimer This script is for educational purposes only.
It does not constitute financial advice, and past performance is not indicative of future results. Always do your own research and test strategies before making trading decisions.
Pine Script® indicator
by BreakoutBarbie
ORBSMMAATRVOLREENTRY2Contracts📈 Opening Range Fibonacci Breakout (TradingView Strategy) Overview: The Opening Range Fibonacci Breakout strategy is designed to capture high-probability intraday moves by combining the power of the 15-minute opening range, trend confirmation via SMMA, and volume-based momentum filtering. At the start of each trading session, the script automatically plots the Opening Range Box based on the first 15 minutes of price action — highlighting key intraday support and resistance levels. How It Works: Opening Range Setup The first 15 minutes of the session define the range high and low. A visual box marks this zone on the chart for easy reference. Signal Generation A Smoothed Moving Average (SMMA) with a user-defined period determines overall trend bias. Candle volume is analyzed to confirm momentum strength. Long Signal: Price breaks above the opening range high, SMMA trending up, and volume supports the move. Short Signal: Price breaks below the opening range low, SMMA trending down, and volume supports the move. Take Profit & Targets Fibonacci extension levels are automatically plotted from the opening range. These dynamic levels serve as structured Take Profit (TP) zones for partial or full exits. Features: ✅ 15-Minute Opening Range Box ✅ Adjustable SMMA period ✅ Volume-based confirmation filter ✅ Automatic Fibonacci profit targets ✅ Visual Long/Short alerts & signals Ideal For: Scalpers and intraday traders who rely on early-session momentum, breakout confirmation, and precision exit targets. Backtested for MNQ/NQ futures trading
Pine Script® strategy
by wavyyy_z
1
AEON | Liquidity HunterA visual tool for identifying high-probability liquidity zones across multiple timeframes and sessions. Overview Liquidity Hunter is a multi-timeframe, all market tool designed to help traders visualise areas where price may be drawn in search of resting liquidity. These liquidity zones often align with swing highs and lows, session extremes, or significant higher-time-frame reference points. Rather than producing entry or exit signals, this indicator aims to support market behaviour analysis and contextual awareness. Core Functions The indicator identifies potential liquidity areas using four optional methods: 1. Current Time Frame Analysis – Automatically locates swing highs and lows based on a customisable setting for sensitivity and lookback depth. 2. Higher Time Frame Analysis – Uses the same logic as above, but projects liquidity zones from a selected higher time frame (HTF). 3. Session Highs & Lows – Highlights the Asian, London, New York, or user-defined session extremes where liquidity commonly pools. 4. Time-Based Highs & Lows – Marks the final bar of any higher time frame (for example, the last H4 or D1 candle) to show potential liquidity reference points. Each method can be enabled or disabled independently and visually customised, allowing traders to tailor the display to their preferred style and time frame. How to Use When applied, the indicator plots horizontal levels representing potential liquidity pools. These levels persist until price engages with or mitigates them, at which point users can opt to modify their visual style or delete them as preferred. Adjusting the sensitivity of the current and higher time frame levels may reflect the market's likelihood of treating them as targets or reversal points. Many traders combine these levels with concepts such as market structure shifts, displacement, or fair-value gaps to build a narrative around price behaviour. Disclaimer This indicator is provided for educational and informational purposes only. It does not constitute financial advice or a trade signal. Past performance or visual confluence does not guarantee future results. --- About the Author Created by a passionate developer focused on algorithmic and quantitative concepts.
Pine Script® indicator
by GA1A
3
Narratives [Pro+]Narratives - Release Narratives is a comprehensive trading indicator designed to help traders build a structured narrative around price action. Built on the concepts of Inner Circle Trader, GxT Profiling, and HTF Analysis, It integrates advanced Smart Money concepts such as Fair Value Gaps, SMT Divergence, Liquidity Sweeps, Precision Swing Points, and Session Levels — all within one cohesive and adaptive system. Explore the features below: Fair Value Gaps (FVG) - Automatically detects and displays bullish and bearish Fair Value Gaps with dynamic invalidation - Customizable colors, box limits, and extension behavior until price closes through the gap - Automatically removes invalidated gaps for a cleaner view Smart Money Technique (SMT) Divergence - Detects divergence between correlated assets at Previous Day High/Low levels - Automatic preset detection for major markets including Indices, Forex, Metals, Energy, and Crypto - Inversion SMT detection when correlated assets sweep levels while the primary asset does not - Labels display which specific assets are in divergence Candle Sweep Detection - Identifies C2 sweep patterns where Candle 2 sweeps Candle 1’s high or low and closes back - Detects C3 closure patterns - Dynamic detection removes sweep lines if subsequent price action invalidates the pattern - Configurable maximum sweeps and optional bias filtering Precision Swing Point (PSP) - Detects swing highs and lows that occur with correlated asset divergence - Two display modes: - PSP Only – shows confirmed swing points with divergence - All Precision Candles – highlights every divergence candle - Supports up to three correlated assets with both manual and automatic preset modes Previous Day High/Low (PDH/PDL) - Plots previous day’s high and low across all intraday timeframes - Dynamic mitigation stops line extension when levels are swept - Customizable line styles for active and mitigated states - Status tracking shows Intact or Swept in the information table Previous Week High/Low (PWH/PWL) - Plots previous week’s high and low with automatic detection across all intraday timeframes - Dynamic mitigation stops line extension when levels are swept - Customizable line styles for active and mitigated states - Status tracking shows Intact or Swept in the information table Premium / Discount Zones - Automatically calculates and displays Premium and Discount ranges based on current structure - Helps visualize optimal trade zones within equilibrium - Optional midpoint (Equilibrium) line - Fully customizable colors and fill styles Killzone Levels - Tracks Asia and London session highs and lows with automatic timezone conversion - Levels extend until mitigated with optional line removal - Session-based detection resets daily Timeline Markers - Four customizable vertical lines mark key trading times - Default setup includes major market opens in New York timezone - Optional display on lower timeframes Quarterly Theory - Plots vertical lines marking quarterly cycles across multiple timeframes - 15M charts: 90m quarters - 30M charts: Daily quarters (6-hour cycles from 6PM) - 1H charts: Weekly quarters - 4H charts: Monthly quarters - Daily charts: Yearly quarters Information Table - Displays current bias, timeframe, PDH/PDL status, and timezone - Customizable position, colors, font size, and individual element toggles - Includes Ticker and Timeframe for quick reference
Pine Script® indicator
by chaesmt