Get started

Candlestick analysis

Custom Two Sessions H/L/50% LevelsTrack high/low/midpoint levels across two customizable time sessions. Perfect for monitoring H4 blocks, session ranges, or any custom time periods as reference levels for lower timeframe trading. What This Indicator Does: Tracks and projects High, Low, and 50% Midpoint levels for two fully customizable time sessions. Unlike fixed-session indicators, you define EXACTLY when each session starts and ends. Key Features: • Two independent sessions with custom start/end times (hour and minute) • High/Low/50% midpoint tracking for each session • Visual session boxes showing calculation periods • Horizontal lines projecting levels into the future • Historical session levels remain visible for reference • Works on any chart timeframe (M1, M5, M15, H1, H4, etc.) • Full visual customization (colors, line styles, widths) • DST timezone support Common Use Cases: H4 Candle Tracking - Set sessions to 4-hour blocks (e.g., 6-10am, 10am-2pm) to track individual H4 highs/lows H1 Candle Tracking - 1-hour blocks for scalping reference levels Session Trading - ETH vs RTH, London vs NY, Asian session, etc. Custom Time Periods - Any time range you want to monitor How to Use: The indicator identifies key price levels from higher timeframe periods. Use previous session H/L/50% as reference levels for: Identifying sweep and reclaim setups Lower timeframe structural flip confirmations Support/resistance zones for entries Delivery targets after breaks of structure Settings: Configure each session's start/end times independently. The indicator automatically triggers at the first bar crossing into your specified time, making it compatible with all chart timeframes.
Pine Script® indicator
by michaelpharrold
1
FVGC - SignalsFVGC — Signals (by Capital Complex) Part of the FVGC Suite. Purpose-built for Nasdaq-100 futures (NQ/MNQ), this companion to “FVGC — Visual Overlay” turns the overlay’s structure into tightly-gated entry signals—focusing on the first qualified engulf after a valid FVG tap inside your trading windows. The rules and defaults have been shaped by years of systematic backtesting (no performance claims). ## What it does FVGC — Signals listens for a specific sequence and only then prints a trade signal: * Retrace→ Tap→ Engulf: The ultimate continuation model, FVGC by Capital Complex. * Opposing-FVG safety: As per the FVGC model by Capital Complex, optimal setups avoid opposing restrictions such as opposing FVGs, this is all coded into your entries. * Distance-aware engulf: Engulfing candle restrictions based on data backed optimizations, timeframe and volatility aware. * Fail-to-Close integrity: Require minimal interaction with rejection FVG. * Structured drawings: TP/SL/BE are optimally sized on setup conditions, with point distances labelled for quick assessment. Everything updates in real-time and only prints after the full sequence is satisfied, so you see one clean, first-engulf signal per opportunity (or one-and-done per gap if you choose). ## Why traders use it * Clarity at the moment of commitment: Signals only fire after strict models are met. * Designed for NQ: Defaults reflect NY RTH behavior and typical NQ volatility patterns. * Noise control: Auto distance caps and fail-to-close filters help avoid low-quality chases. * Pairs perfectly with Overlay: Use Visual Overlay for context (sessions, HTF FVG lines, news footprints) and Signals for the entry trigger. ## Key features & options * Timezone-aware sessions: Three trading windows. Models: * FVGC with BOS. * FVGC with IFVG. Filters: * Engulf distance cap (auto optimized for 30s/1m/2m) with volatility overide. * Opp-FVG 50% override (allow inside if close passes the opposing gap’s midpoint). * Fail-to-Close(inside and/or past midpoint). * Trade management visuals: Optimal TP/SL/BE lines and right-side points labels. * Entry limits: Allow multiple entries per same FVG or **one-and-done**. * Day “intensity” shading: Grades the 09:30–09:35 points range to hint at expected intraday pace during 09:30–11:30. ## How to use 1. Load FVGC — Signals on 30 sec. 2. Set your Timezone and enable the Trading Window(s) you use (default 09:30–11:30 NY). 3. Choose Models (BOS / IFVG) and enable Filters (distance cap, open override, Opp-FVG 50%, Fail-to-Close) as desired. 4. (Optional) Toggle TP/SL/BE drawings and “wait for close” for conservative rendering. 5. Use alongside FVGC — Visual Overlay so the structural context and the entry triggers remain in sync. ## Notes * Signals are calculated without lookahead; non-standard chart types are not supported for signal generation. * This is an entry-signals and visualization tool, not an execution strategy. Risk sizing, commissions, slippage, and order handling remain the user’s responsibility. * Years of backtesting informed defaults and guardrails; past results do not guarantee future performance. ## Credits & suite **Capital Complex — FVGC Suite** © TheHiddenMarkets (code components).
Pine Script® indicator
by TheHiddenMarkets
1
FVGC — Visual OverlayFVGC — Visual Overlay (by Capital Complex) Part of the FVGC Suite. A clean, session-aware overlay that draws the context you trade inside: current price-action reference levels, draws on liquidity, HTF FVG lines, and scheduled news footprints—purpose-built to pair with the companion **“FVGC — Signals”** indicator. --- ## What it does FVGC — Visual Overlay keeps your chart uncluttered while putting the most traded “magnets” and timing cues in view: Session & prior-day reference levels * Previous NY (09:30–16:00) High/Low * Asia (19:00–02:00) and London (02:00–08:00) High/Low * Prior-Day High/Low (18:00→18:00 roll) * Opening Range (09:30–09:45) High/Low * 09:30 one-minute High/Low News footprints (Forex Factory) * Vertical event markers (impact-aware) * Optional 1-minute **Data High/Low** lines per event to track the true expansion bar HTF displacement context * 15m / 1h / 4h FVG “lines” (unmitigated) that extend until tagged, then auto-freeze LTF price-action scaffolding * FVG boxes (30s/1m/2m)*drawn only inside user-defined trading windows * Boxes dim on mitigation and freeze on inversion for crystal-clear state at a glance Everything is designed to update in real-time, extend while active, and freeze the moment price “takes” the level—so you always know which magnets remain live. --- ## Why traders use it * Immediate context: See where today sits relative to yesterday’s extremes, global sessions, and OR. * Liquidity mapping: Tag path-of-least-resistance with HTF FVG lines and news Data HL. * Noise-free timing: Limit LTF detections to your **Trading Windows** (e.g., 09:30–11:30 ET). * Pairs perfectly with entries: Use this with **FVGC — Signals** for tap/engulf/inversion logic while the overlay handles the visuals. --- ## Key features & options * Timezone-aware - (default: America/New_York) * Trading Windows (x3) - with pre-window drawing option for early scaffolding * Master visual gates * DOL Visuals: gate OR/09:30/Prev-Day/Prev-NY/Asia/London/HTF FVG/6–10am HL * LTF Visuals: gate LTF FVG boxes & ref lines * Impact filters for news (High/Medium) * Auto-trim & weekly resets where appropriate to keep charts tidy * Color controls for every element (including mitigated/inverted FVG styling) --- ## How to use 1. Load “FVGC — Visual Overlay.” - Set your Timezone and Trading Windows. 2. Toggle DOL Visuals and LTF Visuals to match your workflow. 3. (Optional) Enable News and Data HL for expansion tracking around releases. 4. For entry logic and automation of Capital Complex FVGC model, add FVGC — Signals on the same chart. > Tip: Keep HTF FVG lines on and let them freeze when tagged to preserve the day’s structural story. --- ## Notes * Designed for **index futures, indices, and liquid FX** where session structure and news matter. * Uses an on-chart Forex Factory decode for event timing; impact labels/HL lines are optional. * This script is **visual only**—no orders/alerts; pair it with **FVGC — Signals** for signal generation. --- ## Credits & suite * **Capital Complex — FVGC Suite** * News decoding utilities courtesy of **toodegrees** libraries. * © TheHiddenMarkets (code components). --- ## Disclaimer This tool is for **educational purposes only** and does **not** constitute financial advice. Trading involves risk; do your own research and manage risk appropriately.
Pine Script® indicator
by TheHiddenMarkets
#1 Vishal Toora Buy Sell Tablecopyright Vishal Toora **“© 2025 Vishal Toora — counting volumes so you don’t have to. Buy, sell, or just stare at the screen.”** Or a few more playful options: 1. **“© Vishal Toora — making deltas speak louder than your ex.”** 2. **“© Vishal Toora — one signal to rule them all (Buy/Sell/Neutral).”** 3. **“© Vishal Toora — because guessing markets is so 2024.”** Disclaimer: This indicator is for educational and informational purposes only. I do not claim 100% accuracy, and you are responsible for your own trading decisions.
Pine Script® indicator
by VishalT_Financee
cd_correlation_analys_Cxcd_correlation_analys_Cx General: This indicator is designed for correlation analysis by classifying stocks (487 in total) and indices (14 in total) traded on Borsa İstanbul (BIST) on a sectoral basis. Tradingview's sector classifications (20) have been strictly adhered to for sector grouping. Depending on user preference, the analysis can be performed within sectors, between sectors, or manually (single asset). Let me express my gratitude to the code author, @fikira, beforehand; you will find the reason for my thanks in the context. Details: First, let's briefly mention how this indicator could have been prepared using the classic method before going into details. Classically, assets could be divided into groups of forty (40), and the analysis could be performed using the built-in function: ta.correlation(source1, source2, length) → series float. I chose sectoral classification because I believe there would be a higher probability of assets moving together, rather than using fixed-number classes. In this case, 21 arrays were formed with the following number of elements: (3, 11, 21, 60, 29, 20, 12, 3, 31, 5, 10, 11, 6, 48, 73, 62, 16, 19, 13, 34 and indices (14)). However, you might have noticed that some arrays have more than 40 elements. This is exactly where @Fikira's indicator came to the rescue. When I examined their excellent indicator, I saw that it could process 120 assets in a single operation. (I believe this was the first limit overrun; thanks again.) It was amazing to see that data for 3 pairs could be called in a single request using a special method. You can find the details here: When I adapted it for BIST, I found it sufficient to call data for 2 pairs instead of 3 in a single go. Since asset prices are regular and have 2 decimal places, I used a fixed multiplier of $10^8$ and a fixed decimal count of 2 in Fikira's formulas. With this method, the (high, low, open, close) values became accessible for each asset. The summary up to this point is that instead of the ready-made formula + groups of 40, I used variable-sized groups and the method I will detail now. Correlation/harmony/co-movement between assets provides advantages to market participants. Coherent assets are expected to rise or fall simultaneously. Therefore, to convert co-movement into a mathematical value, I defined the possible movements of the current candle relative to the previous candle bar over a certain period (user-defined). These are: Up := high > high and low > low Down := high < high and low < low Inside := high <= high and low >= low Outside := high >= high and low <= low and NOT Inside. Ignore := high = low = open = close If both assets performed the same movement, 1 was added to the tracking counter. If (Up-Up), (Down-Down), (Inside-Inside), or (Outside-Outside), then counter := counter + 1. If the period length is 100 and the counter is 75, it means there is 75% co-movement. Corr = counter / period ($75/100$) Average = ta.sma(Corr, 100) is obtained. The highest coefficients recorded in the array are presented to the user in a table. From the user menu options, the user can choose to compare: • With assets in its own sector • With assets in the selected sector • By activating the confirmation box and manually entering a single asset for comparison. Table display options can be adjusted from the Settings tab. In the attached examples: Results for AKBNK stock from the Finance sector compared with GARAN stock from the same sector: Timeframe: Daily, Period: 50 => Harmony 76% (They performed the same movement in 38 out of 50 bars) Comment: Opposite movements at swing high and low levels may indicate a change in the direction of the price flow (SMT). Looking at ASELS from the Electronic Technology sector over the last 30 daily candles, they performed the same movements by 40% with XU100, 73.3% (22/30) with XUTEK (Technology Index), and 86.9% according to the averages. Comment: It is more appropriate to follow ASELS stock with XUTEK (Technology index) instead of the general index (XU100). Opposite movements at swing high and low levels may indicate a change in the direction of the price flow (SMT). Again, when ASELS stock is taken on H1 instead of daily, and the length is 100 instead of 30, the harmony rate is seen to be 87%. Please share your thoughts and criticisms regarding the indicator, which I prepared with a bit of an educational purpose specifically for BIST. Happy trading.
Pine Script® indicator
by cdikici71
2
Spooky Time (10/31/25) [VTB]Get ready to add some eerie fun to your charts this Halloween! "Spooky Time" is a lighthearted indicator that draws a festive, animated Halloween scene right on your TradingView chart. Perfect for traders who want to celebrate the spooky season without missing a beat on the markets. Whether you're analyzing stocks, crypto, or forex, this overlay brings a touch of holiday spirit to your setup. #### Key Features: - **Jack-o'-Lantern Pumpkin**: A detailed, glowing pumpkin with carved eyes, nose, and a jagged mouth. The eyes and mouth cycle through black (off), yellow, and red glows for a subtle animation effect, giving it that classic haunted vibe. - **Flickering Candle**: A wax candle with a wick and an animated flame that shifts positions slightly across three frames, mimicking a real flickering light. The flame color changes between yellow, red, and orange for added dynamism. - **Spider Web and Spider**: A spiral web with radial lines, complete with a creepy-crawly spider. The spider's legs animate with small movements, as if it's ready to pounce—perfect for that extra spooky touch! - **Customization Options**: Toggle the "Desiringmachine" label on/off, choose its position on the chart (e.g., Bottom Center), and select the text color. The entire scene is positioned relative to the chart's open price and ATR for better scaling. - **Animation Cycle**: The whole setup uses a simple 3-frame animation based on bar_index, making it feel alive without overwhelming your chart. This indicator is purely visual and non-intrusive—it doesn't plot any trading signals or data, so it won't interfere with your strategies. Just add it to your chart for some Halloween cheer during your trading sessions! **Date Note**: Timed for Halloween 2025 (10/31/25)—feel the spooky energy! **Happy Halloween!!!** 🎃👻🕸️
Pine Script® indicator
by vitkovic
Liquidity Sweep & Reversal — Body Anchored + Risk (v6)Overview The Liquidity Sweep & Reversal — Locked to Price (v6) indicator identifies liquidity sweeps around major swing highs and lows, confirming reversals when price closes back inside the swept level. All signals are locked to price (bottom of green candle for BUY, top of red candle for SELL), so they remain perfectly aligned when zooming or scaling. This indicator is ideal for swing traders and scalpers who trade reversals, liquidity events, and reclaim structures. How It Works Detects confirmed swing highs and lows using a pivot-based structure. Waits for a liquidity sweep — when price wicks beyond a recent swing. Confirms a reclaim when price closes back inside the previous swing level. Triggers a BUY or SELL signal anchored to the candle body. Automatically calculates stop loss and risk using ATR and your inputs. Input Settings Swing Detection Swing Detection Strength: How many bars confirm a swing pivot. Higher = stronger swings. Bars to Confirm Reclaim: Number of bars after a sweep for price to close back within the swing zone. Swing Proximity %: How close price must come to a swing to count as a liquidity sweep. Trend Filter (optional) Use EMA Trend Filter: When enabled, only BUY in uptrend and SELL in downtrend. Fast EMA Length / Slow EMA Length: Define EMAs used to detect trend direction. Risk & Stop Management ATR Length: Period for ATR calculation (volatility measurement). Base ATR Stop Buffer (x ATR): Distance of stop loss from entry based on ATR multiplier. Position Size (quote units): Your total position size in quote currency (e.g., USDT). Risk % of (Position / 20): Defines how much of your position to risk per trade. Example: (Position / 20) × Risk % = per-trade risk. Chart Elements BUY Arrow (green): Appears after a liquidity sweep and reclaim near a swing low. SELL Arrow (red): Appears after a sweep and reclaim near a swing high. Labels: Display entry price, stop loss (SL), and calculated risk dollar value. EMAs: Optional fast/slow moving averages for directional bias. Dynamic Stops: Adjust automatically using ATR × risk settings. Trading Tips Use BUY signals near liquidity sweeps under swing lows. Use SELL signals near liquidity sweeps above swing highs. Adjust swing length for different timeframes: Lower values for scalping (3–5) Higher values for swing trading (7–10) Respect stop loss levels and use risk control settings for consistent sizing. Combine with volume, OBV, or structure for confirmation. Alerts BUY — Locked to Price: "BUY: swing low reclaimed with dynamic stop." SELL — Locked to Price: "SELL: swing high reclaimed with dynamic stop." Best Use Cases Liquidity-based reversals Swing entry confirmation Stop hunt reclaims Structure-based entries Author Created by @roccodallas For traders who value clean structure, risk control, and chart precision.
Pine Script® indicator
by roccodallas
Gap & Crap Detector V1Gap & Crap Detector (5% Gap Detector + % Labels) This indicator automatically detects stocks that gap up ≥ 5% (adjustable) from the previous day’s close and tracks whether the move holds or fails over the next three candles. 🔍 How It Works Yellow % Label → Appears on every candle that gaps up ≥ 5%, showing the exact percentage gap. Gap & Go (Green Label) → Triggers when the next 3 candles close above the gap-day low, signaling momentum continuation. Gap & Crap (Red Label) → Triggers immediately if any of the next 3 candles close below the gap-day low, signaling momentum failure. ⚙️ Inputs & Customization Gap % Threshold – Default 5% (adjustable) Label Size – Tiny / Small / Normal / Large / Huge Opacity Controls – Independently set transparency for yellow, red, and green labels Gap & Go Offset – Adjust how high above the candle the green label appears 🧠 Usage Use this tool to identify breakout gaps and verify whether price action confirms (Gap & Go) or fails (Gap & Crap). Ideal for momentum traders, swing traders, Ovtlyr Plan M, and gap strategy backtesting.
Pine Script® indicator
by MechArt_