Get started

Commodities

MTF TZ-CXThis is a Beta version of Trend Indicator using Multi Time Frame Analysis to suggest a long or a short the main use of this indicator is quick scalping and Intra-day trading. The Indicator shows the option to show the Trend Zone and Buy/Sell Signals which the use can on or off Also to avoid false positives we have introduced a double check using RSI, it is defaulted to 60/30 - the users are free to change it as per their preferences The system will not suggest a trade when the the counter in inside the RSI limits Stop Loss - That should be done by following ones risk appetite , Ideally the open/close of the previous candle should be the stop loss for the buy/sell but everyone has their own Risk Management Strategies based on the capital deployed. Disclaimer : There could be scenarios when the candle is shown as a long or short and then the candle turns into opposite direction red/green . In such scenarios , Please refer to the just preceding candle and if this candle is moving into positive direction (forming green candle) only then buy , Similarly Sell/Short only if this candle is forming a red candle
Pine Script® indicator
by SmartCaps
HFT Scalper IndicatorThis strategy is a scalper strategy developed by HFT Research. Scalper is highly customizable and provides endless opportunities to find profitable setups in the market. Use Bollinger Bands This piece of the settings will turn and off Bollinger band’s input in the decision making. BB Length will determine the Moving average you are using to take the standard deviation off of which is named as BB Multiplier. Default settings will use 20 moving average and take standard deviation of 2 to create lower and upper bands. Increasing the Multiplier will give you fewer but safer entries. Use Bollinger Bands % This setting will allow the user to determine at what Bollinger band width %, he wants to take start looking to take trades. It is known that when prices are stable and moving sideways, Bollinger bands contract and it becomes more reactive to small moves in the market. Using this setting, you can ignore the signals that would be generated while Bollinger bands are contracted. This setting will allow the user to weed out the noise in the market and really allow them to make the most out of Bollinger bands. Use RSI You can also turn on and off the RSI as well. Alternatively, there is an option to use RSI on a different time frame than you are currently on. For example, if you are looking at the 5min chart to use Bollinger bands but you would like to look at the RSI value on the 15min chart. You can do so by selecting the custom RSI timeframe as well as adjusting the Oversold and Overbought value. Use STOCH For those who want extra protection on their entry can throw STOCH into their decision making. STOCH acts like RSI but it is more prone to small moves. It will help the users to get a better entry if used correctly. Stoch may not be in the buy zone when RSI is at say 35, however, if price dips a little more and STOCH might be in the buy zone when RSI is at say 20. This way it will help you have better entries than just using RSI. In a way, you can use STOCH to scalp RSI. Use VWAP VWAP stands for volume weighted average price. It is an extremely useful indicator when trading intra-day. It does reset every trading session which is at 00:00 UTC. Instead of looking at x number of candles and providing an average price, it will take into consideration volume that’s traded at a certain price and weigh it accordingly. Use ADX ADX stands for average directional index. It is an indicator that measures volatility in the market. Unfortunately, the worst market condition for this strategy is sideways market. ADX becomes a useful tool since it can detect trend. If the volatility is low and there is no real price movement, ADX will pick that up and will not let you get in trades during a sideways market. It will allow you to enter trades only when the market is trending. Use MA Filters Lookback: It is an option to look back x number of candles to validate the price crossing. If the market is choppy and the price keeps crossing up and down the moving average you have chosen, it will generate a lot of “noisy” signals. This option allows you to confirm the cross by selecting how many candles the price needs to stay above or below the moving average. Setting it 0 will turn it off. MA Filter Type: There is a selection of moving averages that is available on TradingView currently. You can choose from 14 different moving average types to detect the trend as accurate as possible. Filter Length: You can select the length of your moving average. Most commonly used length being 50,100 and 200. Filter Type: This is our propriety smoothing method in order to make the moving averages lag less and influence the way they are calculated slightly. Type 1 being the normal calculation and type 2 being the secret sauce. Reverse MA Filter: This option allows you to use the moving average in reverse. For example, the strategy will go long when the price is above the moving average. However, if you use the reserve MA Filter, you will go short when the price is above the moving average. This method works best in sideways market where price usually retraces back to the moving average. So in an anticipation of price reverting back to the moving average, it is a useful piece of option to use during sideway markets which is the worst market condition for scalper. Please visit our website for more information
Pine Script® indicator
by HFTResearch
17
Quickie (Free) IndicatorQuickie is a free tradingview Indicator developed by HFT Research. It works in sideways and trending markets depending the way you set it as well as both on short time frame and long time frame. It comes with backtesting abilities on tradingview. You can find the alerts to go long and short here, please check the backtester to fine tune your strategy. Use Bollinger Bands This piece of the settings will turn and off Bollinger band’s input in the decision making. BB Length will determine the Moving average you are using to take the standard deviation off of which is named as BB Multiplier. Default settings will use 20 moving average and take standard deviation of 2 to create lower and upper bands. Increasing the Multiplier will give you fewer but safer entries Use RSI You can also turn on and off the RSI as well. Alternatively, there is an option to use RSI on a different time frame than you are currently on. For example, if you are looking at the 5min chart to use Bollinger bands but you would like to look at the RSI value on the 15min chart. You can do so by selecting the custom RSI timeframe as well as adjusting the Oversold and Overbought value. Use MA Filter Lookback: The indicator has an option to look back x number of candles to validate the price crossing. If the market is choppy and the price keeps crossing up and down the moving average you have chosen, it will generate a lot of “noisy” signals. This option allows you to confirm the cross by selecting how many candles the price needs to stay above or below the moving average. Setting it 0 will turn it off. MA Filter Type: There is a selection of moving averages that is available on TradingView currently. You can choose from 14 different moving average types to detect the trend as accurate as possible. Filter Length: You can select the length of your moving average. Most commonly used length being 50,100 and 200. Filter Type: This is our propriety smoothing method in order to make the moving averages lag less and influence the way they are calculated slightly. Type 1 being the normal calculation and type 2 being the secret sauce . Reverse MA Filter: This option allows you to use the moving average in reverse. For example, the strategy will go long when the price is above the moving average. However, if you use the reserve MA Filter, you will go short when the price is above the moving average. This method works best in sideways market where price usually retraces back to the moving average. So, in an anticipation of price reverting back to the moving average, it is a useful piece of option to use during sideway markets. For more information please check out our website
Pine Script® indicator
by HFTResearch
3
TWT_MAGIC_MCXDescription: TWT_MAGIC_MCX is designed to trade the MCX commodities for overnight positions. The logic behind this is to calculate the closing price based on today's price action and come up with suggestion at end of the closing to BUY or SELL for Next Day. How to Trade:: if on a 5 Minute Chart, the GREEN arrow appears at 23:25 Candlestick then Enter BUY position if on a 5 Minute Chart, the RED arrow appears at 23:25 Candlestick then Enter SELL position if on a 5 Minute Chart, no arrow appears at 23:25 Candlestick then Do not take any trade. Trade need to be taken between 23:25 to 23:30 Profit/SL need to booked at next morning.
Pine Script® indicator
by TheWiseTraders
[astropark] Volume that mattersDear Followers, does volume say something about market makers and what will happen in near future? Today a new Price Action Tool , the "Volume that matters" indicator. When a Market Maker executes his/her orders, there is no way he/she can do it without giving us some footprints: volume! Specific Volume spikes happen as reactions at support or resistance range , as well as at supply and demand zones market makers' actions trend switching in short-term and mid-term future They can be both bullish or bearish , but the real problem is that not all, but only a few volume candle matters ! And this tool will filter them for you. This indicator works on every timeframe (eg. 15m, 30m, 1h, 2h, 4h, 6h, 1D, ...), the higher, the better! on cryptocurrencies (eg. XBTUSD, ETHUSD, ETHBTC, both USDT and BTC markets, ...) on forex (eg. EURUSD, GPBUSD, JPYUSD, ...) on stocks (eg. AMZN, FB, TSLA, GOOG, NFLX, ...) on commodities (eg. GOLD, SILVER, OIL, ...) This indicator has following options: edit volume filter and period analysis edit filter based on fixed or percentage volatility change edit filter based on candle value size show a suggestion of possible entries and stoploss You can enhance your trading by using it together with my "Engulfing that matters", my "Pinbar that matters" and my "Breaker Blocks (BB) and Supply/Demand Order Blocks (OB)" indicators, so you can easily spot confluences and have more confidence in trades. Here my Engulfing that matters indicator Here my Pinbar that matters indicator Here my Breaker Blocks (BB) and Supply/Demand Order Blocks (OB) indicator Here below some examples on how to use the indicator. BTCUSDT 1D ETHUSD 4h LINKBTC 1h EURUSD 4h AMZN 1h XAUUSD 4h Here below an example of suggested entries and stoploss This is a premium indicator , so send me a private message in order to get access to this script .
Pine Script® indicator
by astropark
[astropark] Pinbar that mattersDear Followers, today a new Price Action Tool , the "Pinbar that matters" , also known as Hammer (bullish case) and Inverted Hammer (bearish case). Everybody knows the importance of pinbar to highlight reaction at support or resistance range , as well as at supply and demand zones market makers' actions trend switching in short-term and mid-term future They can be both bullish or bearish , but the real problem is that not all, but only a few pinbar matters ! And this tool will filter them for you. This indicator works on every timeframe (eg. 5m, 15m, 30m, 1h, 2h, 4h, 6h, 1D, ...) on cryptocurrencies (eg. XBTUSD, ETHUSD, ETHBTC, both USDT and BTC markets, ...) on forex (eg. EURUSD, GPBUSD, JPYUSD, ...) on stocks (eg. AMZN, FB, TSLA, GOOG, NFLX, ...) on commodities (eg. GOLD, SILVER, OIL, ...) This indicator has following options: edit filter based on fixed or percentage volatility change edit filter based on candle value size show a suggestion of possible entries and stoploss Be sure to edit both fixed and percentage volatility options in order to have a correct filter on your chart and timeframe. You can enhance your trading by using it together with my "Engulfing that matters" and my "Breaker Blocks (BB) and Supply/Demand Order Blocks (OB)" indicators, so you can easily spot important points where to start a short or a long trade. Here my Engulfing that matters indicator Here my Breaker Blocks (BB) and Supply/Demand Order Blocks (OB) indicator Here below some examples on how to use the indicator. XBTUSD 5m ETHUSD 15m BNBBTC 1h ETHBTC 12h EURUSD 1h JPYUSD 4h AMZN 5m FB 4h XAUUSD 15m Copper Futures 1h Here below an example of suggested entries and stoploss This is a premium indicator , so send me a private message in order to get access to this script .
Pine Script® indicator
by astropark
3
[astropark] Fair Value GapsDear Followers, today a new epic tool, the "Fair Value Gap (FVG) Finder" . Fair Value Gaps are quite important to trade, as they represent both volume and trading unfilled gaps, which most of the time are filled and then price reverse . This indicator will let you set alerts on when a new FVG is found and when it is filled. Traded together with Breaker Blocks (BB) and Supply/Demand Order Blocks (OB) , you can easily spot important points where to start a short or a long trade. Here my Breaker Blocks (BB) and Supply/Demand Order Blocks (OB) indicator Here below some examples on how to use the indicator. On Bitcoin On EURUSD
Pine Script® indicator
by astropark
126
[astropark] Sniper ScalperDear Followers, today a new Scalper Tool , which works great on all timeframes , from 1 minute to 1 month! Keep in mind that this is a Scalper, so it's always a good idea to take or lock your profits, despite you may use it also for swing trading. This tool has some cool features: it works on all timeframes , from 1 minute to 1 month! you can change a filter option from 1 (lowest) to 7 (highest) Here some examples on how it performs on many timeframes and charts. EURUSD 15m chart AMZN 1h chart Bitmex XBTUSD 4h chart Bitfinex ETHUSD 1h chart Binance Chainlink LINKBTC 1h chart Binance Ethereum ETHBTC 1h chart GOLD XAUUSD 15m chart The user who wants to use this strategy, especially via an automated bot, must always manage to set a take profit and stoploss, as well as use a proper money and risk management strategies . This is not the "Holy Grail", so use it with caution. This is a premium indicator , so send me a private message in order to get access to this script.
Pine Script® indicator
by astropark
8
Portfolio and Risk Management: Gold Based Net Growth CoefficientHello, if our topic is stocks, whatever signal we get, we have to divide and reduce the risk. Apart from the risk, we need inflation-free figures to detect a clear growth. Gold is one of the most successful tools to beat inflation in this regard in the historical context. When the economy is good, we have to beat both commodities and inflation. For this purpose, I found it appropriate to develop a net growth factor free from gold growth. Investors need several stocks with a high growth rate and as much risk-free as possible. Personally, I think that the science of portfolio and risk management will last a lifetime and should continue. I think this subject is a research and development subject.(R & D) My research and publications on this matter will continue publicly. I wish everyone a good day. NOTE : You can determine the return in the time period you want to look back by adjusting the period in the rate you want from the menu. The standard value is 200 days. (1 year)
Pine Script® indicator
by Noldo
2
Open Close Profit - [Alerts]This script comes with the following indicators and features: Moving Average trend filter (Hull, ZLEMA, McGinley) Pin Bar Filter MACD indicator Pump and Dump filter Entry, Take Profit, and Stop Loss Alerts And a few more indicators in the back-end to increase accuracy, optimize entries and filter out sideways PA This script works really well as a scalper on lower Time Frames as well as on higher Time Frames. Besides that you can also use it on pretty much any coin or asset. This script is not repainting. We advise to use alerts on “Once Per Bar Close”. If you’d like to automate this script you can do that by using AutoView, ProfitView, ProfitTrailer, CryptoHopper etc. Leave a message if you’d like to try it out.
Pine Script® indicator
by fabonacci
4
Yield Curve Inversion MonitorIdentifies when the US Treasury Yield Curve inverts (2 and 10 year bond rates). When they ‘invert’ long-term bonds have a lower interest rate than short-term bonds. In other words, the bond market is pricing in a significant drop in future interest rates (which might be caused by the US Fed fighting off a recession in the future). In the last 50 years, every time the US treasury yield curve inverted a recession followed within 3 years. On average the S&P500 gained 19.1% following the inversion and peaked 13 months later. In other words, as far as investors are concerned, the recession began roughly one year later. However, once the market peaks, it then drops 37.6% on average, wiping out all those gains and more. ...Looks like 2020 is shaping up to be another prime example.
Pine Script® indicator
by capriole_charles
5
Autonomouscript Hello friends, in this script, hand drawing and loyalty to terminals are minimized. ***FEATURES 1 - Rational Auto Support and Resistance Levels NOTE : For 1W TF , you can take 0.000 - 1.000 for 1 area , i didn't find to necessary to autoplot this condition because of between levels are so large and for long term. Multi time-frame In small time frames, unreasonable support eliminates resistance levels. Suitable for every pair. If the prices change by region, automatic drawing is made in the new region and given to the screen. Automatic Plotting Feature Rational Levels 2 - Auto Risk/Reward Ratio Calculator Calculations are made according to support and resistance in less than 4 hours TF. The opposite is true for Short. 2 methods in 4 hours and larger time frames and two zones specified: 1. Price < 0.618 Level : Long Position Calculation : From Current Support to 0.618 Level Short Position Calculation: From Current Resistance to 0.000 Level 2. Price > 0.618 Level Long Position Calculation :Support and 1.000 Level . Short Position Calculation : Resistance and 0.000 Level Risk/Reward Ratio Calculation Examples (TF = Timeframe) : 1 - TF < 4H and Long - Short Risk/Reward Ratio Calculation : For Long Position : For Short Position : 2 - TF > 4H and Long-Short Risk/Reward Ratio Calculation : For Long Position : For Short Position : NOTE : Some algorithms have been added to make this formulation accurate and safe. Therefore, Stop-Loss can be flexed slightly under the support or on the resistance in short position. The target does not change. Staying on the safe side calculates the risk / reward ratio for the worst possible odds. *** Since stop-loss levels are chosen close to support and resistance and determine financial leverage, there is absolutely no need for stop-loss, the investor can determine himself according to the risk / reward ratio. Generally, the support is slightly lower for long and the resistance slightly reasonable for short. 3 - Moving Averages and Cloud a-) Slow Moving Average (Fuchsia) Uses Autonomous LSTM moving average for external timeframes of 1W, Relativity moving average for timeframes 1W and above. NOTE : They are built on price instead of Stochastic Money Flow Index. And because they are price based The High-Low Selection Algorithm has been removed. For more information : Autonomous LSTM => Relativity => b-) Signal Moving Average (Blue) I just added this average after long tests. It was created based on the relative states of the Relativity and Autonomous LSTM and candle states. It is very fast and adaptive but, you should definitely use the risk / reward ratio if you are going to trade just by looking at it. c_) Cloud : It is the region between fast and slow moving average. Cloud Color : Red for : crossunder(price , signal ma) and Green for : crossover(price,signal ma) d-) Plotarrows : Plotted after crossover and crossunder closings to inform the intersection of the two adaptive moving averages. e*) Triangle Shapes : They only reports when the moving average of the signal is long and short. And cloud color is same but without risk/reward radio rule.Rules : Blue : Long Condition with Long Risk/Reward Ratio < 2.5 Orange : Short Condition with Short Risk/Reward Ratio < 2.5 Green : Long Condition with Long Risk/Reward Ratio >= 2.5 Red : Short Condition with Short Risk/Reward Ratio >= 2.5 4 - INFOPANEL - Trader Panel - Calculation results of Risk / Reward Ratios for each bar for Long and Short Position - Current Support and Resistance Levels - Percentage change of the price moving average (period = signal period) only in the signal period * Percentage change of the volume moving average (period = signal period) only in the signal period * Supply and Demand Bias : They are given separately for both long and short (Bull - Bear). It is the reflection of the quantum formulas that form the core of relativity. Nevertheless, the signal moving averages data price and volume are also above in InfoPanel. Important Note : Two starred rules are given to investors and traders to choose between the following facts : Increasing Volume __ Increasing Price = > Healthy Bear Session Increasing Price __ Increasing Volume = > Healthy Bull Session Decreasing Volume __ Increasing Price = > Bulls are weakening Decreasing Volume __ Decreasing Price = > Bears are weakening *** SUMMARY AND USAGE : NOTES It's definitely not just for signals, all data in the system evaluating according to the current economic agenda, carry out your trade like that. You can zoom in using the zoom in zoom out feature (+) of Tradingview, especially in small timeframes. And according to the signal average of the price, cloud coloring was made in green and red. Because in some cases, infopanel can intervene and block small triangles. Alerts : There is no need for any precise alert. In case of need, users can set alarms at support and resistance levels. NOTE : In the design and basic cases of support and resistance levels,inspired by borserman's this script: Special thanks to him. Last Note and Reminder This script may will be updated in terms of design and simplification if deemed necessary. Best regards.
Pine Script® indicator
by Noldo
22
™TradeChartist - Show and Tell - Ichimoku Cloud™TradeChartist Show and Tell - Ichimoku Cloud is a free and easy to use script that helps anyone learn and understand the Ichimoku cloud by using the 'Show and Tell' option from the indicator settings and by choosing the Ichimoku component/Signal from the dropdown box. For individuals new to Ichimoku Cloud , Show and Tell option will help explain the components and signals of Ichimoku Cloud on the chart without having to navigate away from price action, thus making it easier to learn and understand Ichimoku cloud with respect to chart price action on the corresponding time frame. The indicator automatically detects cryptocurrencies as it uses different settings specific to cryptocurrencies market - (20,60,120,30) respectively as opposed to classic - (9,26,52,26). When 'Show and Tell' is unchecked from indicator settings, the script detects signals and important Ichimoku events like Bull/Bear crosses, Bullish/Bearish Kumo Twists, Bullish/Bearish Kumo Breakouts etc and plots labels on chart. To turn off this feature, just uncheck 'Labels' from the styles tab under the indicator settings. This is a free to use indicator. Give a thumbs up or leave a comment if you like the script.
Pine Script® indicator
by TradeChartist
11
[astropark] Ichimoku Cloud Strategy [alarms]Dear Followers, today a Great Swing Trading Strategy , runnable on a bot , which works great on High Timeframes (1D is suggested!) but also even better on 1m Renko chart. If you are a scalper, you will love suggested entries for fast profit. You can run it on 1h timeframe (below is not suggested) if you are used to scalp trading and close each trade whenever you feel happy (a proper trailing stop strategy is suggested anyway). This strategy is based on the Ichimoku Cloud Indicator and let's you set a lot of settings: works on all timeframes (but 1D and above is suggested on normal candlesticks chart) you can run this indicator on 1m Renko chart (be sure to enable the "USING RENKO CHART? ENABLE THIS OPTION" setting) you can use 4 kind of Ichimoku Cloud (Custom, Slow, Standard and Fast - keep only one enabled) you can make the Ichimoku Cloud show or not you can enable showing the possibile re-entries you can enable an heiking ashi analysis you can enable a trailing stop strategy ("Auto Trailing Stop Loss" and "Close Trade When Price Breaks Above the Ichimoku Cloud" are two options very much suggested to keep enabled, especially on bot trading) you can create your own trailing stop stategy and take profit strategy you can enable a simple take profit strategy based on RSI Overbought and Oversold levels This strategy only trigger 1 buy or 1 sell, but if you missed the possibility to open your long or short position don't get mad, but just enable the "show re-entry signals" option, so yout will be able to enter again (be sure to always use a proper money management ). By the way, you can set any alarms you like in order to get notified when any kind of signal is triggered (you need to use the "alarms" version for this). Strategy results are calculated on the timeframe from May 2017 to now, so on 2 years and half, using 10000$ as initial capital and working at 1x leverage (so no leverage at all! If you like to use leverage, be sure tp use a safe option, like 3x or 5x at most in order to have liquidation price very far). This is not the "Holy Grail", so use a proper risk management strategy. This script will let you set all notifications you may need in order to be alerted on each triggered signals (there is also an "ALL-IN-ONE" option for free tradingview users. The backtesting version of this indicator, which will let you backtest how the indicator will perform on any chart you may test, can be found by searching for "Ichimoku Cloud Strategy" and then choosing the astropark indicator with "red and green arrows" at the end of the name. You can find it here below too: This is a premium indicator , so send me a private message in order to get access to this script.
Pine Script® indicator
by astropark
RocketScalper+ Long/Short IndicatorNOTE: To use together with RocketScalper Long/Short Indicator About the Rocketscalper+ Indicator Derives from the RocketScalper Long/Short indicator, was worked on by PM Used by 180+ users as of today Was first published on Sept 10, 2019 It had 1 iteration so far. Will be updated as needed so it keeps giving good outputs (so far no update needed). While the RocketScalper works by merging 3 oscillators and then checking the market balance between sells and buys to give you the final output, the RocketScalper+ uses MA Crossings and adds another layer to filter than final output. It IS NOT an upgrade, use both. Main notes about the RocketScalper+: Wavetrend ignored Took weight off of Godmode for the final output Added weight to Price Oscillator for the final output Added TakeProfit and StopLoss conditions editable for users Turned the scalper more neutral with a slight long bias for the upcoming trend Has several outputs on the chart that you can activate/deactivate Long / Short Signals Self Explanatory / It suggests you should long or short the asset. Show Price Oscillator signals It'll output long/short signals based on the Price Oscillator. Show Stop/Support/Resistance warning Not working as of now, will need to update it soon. No Text inputs on this indicator. Should I use it on all timeframes and all pairs? Yes, works very well with HTF and for all pairs. As you can see above on BTCUSDT (as an example), on the 6h use it as a confirmation to get in a trade, specially if you also use the TMA. For access, please DM us or visit the link below in our Signature.
Pine Script® indicator
by swingjesus
38
Extreme VolumeThis indicator colors volume bars that are significantly higher volume than the vol moving average ( SMA ). Utilizes two multiplier that can be adjusted by user. Defaults are that the indicator colors volume bars yellow if 20% higher than average, and orange if over 50% higher than average. Reason why i created this indicator is i typically don't care about volume unless it is significantly higher than average. I find extreme volume useful for confirmation of a breakout, etc. This is why the rest of the volume bars are gray, they are still available for reference, but I dont pay much attention until volume is higher than average. Also, when you load this indicator it will be in its own pane below the chart. To try and figure out how to add it to same pane as the chart was a huge pain in the ass. Once you figure it out it is pretty easy. I'll try to explain below... Next to the indicator name you have the following options ... Hide, Settings, Show Source Code{}, Delete(X), and More (3 dots) 1) Click on "More" (3 dots) 2) Click on "Move To" then chose "Existing Pane Above" 3) Volume will likely be too large. Volume scale should be on left side, use your mouse to adjust volume smaller 4) Volume will likely be in the middle of your chart, click on it and drag it down.
Pine Script® indicator
by SchamBTC
8