Get started

Fibonacci Retracement

FIBIShows Fibonacci waves for a long range and Fibonacci lines for a short range. For me it helps to identify key levels or confluence on the macro and micro range. In the example above you can clearly see that the macro waves are in a down-trend while the micro lines are in a up-trend.. Also the price has been rejected at the 78.6 fib mirco line but found support on the 78.6 macro wave. these situations are hard to find with the default retracement tools
Pine Script® indicator
by rareSnow99686
2
Titans Engulfing Retracement ZonesThe Titan Engulfing Retracement Zones indicator detects Engulfing Candlesticks on a higher user defined timeframe, and uses that event to plot retracement and extension levels on the chart for ease of users' chart reading and trade execution. The four retracement levels, two of which delimit the target entry zone, and another two delimiting the target exit zone, are also user defined. The user of this indicator is advised that the default levels provided are unoptimized. The user of this indicator is advised to use this indicator at his or her own risk. To further filter out the results of Engulfing Candlestick detection, a long wick condition has been included into the detection mechanics.
Pine Script® indicator
by mmmarsh
1
Fibonacci LevelsENGLISH FiboLevels uses standard deviation (a measure of market volatility). For me, more successful parameters were EMA, 500 days, showing levels 50 and 100. The standard RSI 14 indicator helps to determine the levels, you can use its values to navigate the levels if the price approaches any line, and the RSI is in the overbought or oversold zone, that is, there is a high probability that the price may rebound from this level. If the script does not display levels, then you need to reduce the length parameter If the price has gone beyond the lines, then the number of levels can be increased in the Number of Lines Show parameter Russian В FiboLevels используется стандартное отклонение (величина измерения волатильности рынка). Для меня более удачными параметрами вышли EMA, 500 дней , показ уровней 50 и 100. Определять уровни помогает стандартный индикатор RSI 14, по его значениям можно ориентироваться в уровнях, если цена подходит к какой-либо линии, а RSI находится в зоне перекупленности или перепроданности, то есть большая вероятность что от этого уровня цена может оттолкнуться. Если скрипт не отображает уровней, то нужно уменьшить параметр длина Если цена вышла за пределы линий, то количество уровней можно увеличить в параметре Number of Lines Show
Pine Script® indicator
by im237
4
Auto Fibonacci From Previous High & Low w/ Percentages & AlertsAUTO FIBONACCI FROM PREVIOUS D/W/M/Q/Y HIGH & LOW WITH PERCENTAGES & ALERTS This is an auto fibonacci level generating indicator that uses the high and low from the previous day, week, month, quarter or year. It also has a table with real time updates of how far away the nearest fibonacci levels are above and below the current price, represented in percentages. It includes alerts for each level as well if you want to be notified of price crossing fibonacci levels without watching the chart. ***HOW TO USE*** Fibonacci levels are also known as the golden ratio and are popular levels for traders to use as support and resistance levels. Expect price to bounce off of these levels regularly. The previous high and low are marked as white lines. These are very important levels so make sure to pay attention when price reaches these lines. Make sure to check out the higher timeframes for major levels. Each fibonacci line retracement and extension up to the 3.272 level in each direction is displayed as red or green depending on whether price is above or below that level. The retracement levels used are: previous high, .117, .236, .382, .5, .618, .786, .883, previous low, 1.272, 1.618, 2, 2.272, 2.618, 3 and 3.272. The extension levels used are: .272, .618, 1, 1.272, 1.618, 2, 2.272, 2.618, 3 and 3.272. In the indicator settings input tab you can quickly change the timeframe used, turn lines on/off, upper line colors, lower line colors, previous high and low line colors, line width, turn percentage table on/off, change the color of the percentage table and move the percentage table to a different location on the chart. The indicator includes alerts for each fibonacci level as well, just set your fibonacci timeframe on your favorite ticker and turn on tradingview alerts for alert() calls. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex. ***TIMEFRAMES*** This auto fibonacci indicator can be used on all timeframes. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Buy & Sell Pressure Colored Candles, Directional Movement Index + Fisher Transform, Volume Profile W/ Buy & Sell Pressure Labels, Auto Support And Resistance and Money Flow Index in combination with this Auto Fibonacci. They all have real time Bullish and Bearish labels or percentage gap info as well so you can immediately understand each indicator's trend and how far away major levels are in percentages.
Pine Script® indicator
by FriendOfTheTrend
8
Fibonacci levels MTFHello All, I got some requests for a script that shows Fibonacci Levels of Higher Time Frame Candles. so I made/published this script. I hope it would be useful for you. Options: You can set Higher Time Frame, by default it's 1 Day. Optionally it can use Current or Last Candle of higher time frame to calculate/show its Fibonacci Levels. It can show higher time frame candles at the background optionally. You can change its colors. You can enable/disable/change each Fibonacci levels and their colors. You can enable/disable Fibonacci Labels that is shown at the right ride and see only Fibonacci lines/levels example, Fibonacci levels with higher time frame candles: P.S. if you have ideas to improve this script, drop a comment under the script please Enjoy!
Pine Script® indicator
by LonesomeTheBlue
52
B-auto fibA new interactive input mode for price and time inputs is now available. Instead of selecting bar numers and/or time from input widgets, you can now select them by clicking on the chart. The interactive mode is activated by using confirm = true in input.time() and input.price(). This is code for an Anchored fibonachi indicator where the anchor point is set interactively this way you can change start date and fib level is calculating automaticly indicator is finding highest and lowest price and calculating fib levels thanks to versiyon5 i hope tradingview will make a fibo widget like Anchored VWAP it will be very usefull thanks good works so far :)
Pine Script® indicator
by berk000
9
+ Donchian ChannelsThis version of Donchian Channels uses two source options so that one can create a channel using highs and lows rather than one or the other or closes. My thinking was that this would create a more accurate portrayal of price action (or at least contain the greatest scope of it) as seen through the lens of a Donchian Channel. This was actually part of the genesis of my idea around my Ultimate Moving Average. Besides the single top and bottom plot for the DC's extremities, I've enabled the ability to create outer bands with a variable width that the user can adjust to their preference. I think it's quite nice. I use it in the DC in my other non-overlay indicators. Besides this additional functionality, the indicator has options to plot lines between the basis and the upper and lower bands, so, basically, splitting the upper and lower channel in half. There is no magic number to the lookback. I chose 233 as default because it's a fibonacci sequence number and I'm more interested in using the DC like a very long period bias indicator, and the longer lookback gives a much wider window (because highs and lows are so spread apart) with which other faster indicators (supertrend, shorter period moving averages, etc.) can work without making the screen a clutter. The color of the basis may also be made relevant to higher timeframe information. What I mean by this is that you can set it so that the basis of the current timeframe is colored based on the candle close of the higher timeframe of your choosing. If you're looking at an hourly chart, and you set the color to Daily, the basis will be colored based on the candle close (above or below the basis) of the previous day. If the previous daily close was above the basis, that positive color will be reflected in the basis, even if the current hourly candle closes are below the hourly basis. This could potentially be useful for setting a higher timeframe directional bias and reacting off price crossing the lower timeframe basis (or whatever your trigger for entering a trade might be). This is also optional in my Ultimate Moving Average indicator. You can also set the entire indicator to whatever time frame you want if you want to see where the actual basis, or other levels are on that higher timeframe. Further additions include fibonacci retracement levels. These are calculated off the high and the low of the Donchian Channels themselves. You will see that there are only three retracement levels (.786, .705, .382), one of which is not a fib level, but what some people call the 'OTE,' or optimal trade entry. If you want more info on the OTE just web search it. So, why no .618 or .236? Reason being that the .618 overlaps the .382, and the .236 is extremely close to the .786. This sounds confusing, but the retracement levels I'm using are derived from the high and low, so it was unnecessary to have all five levels from each. I could have just calculated from the high, or just from the low, and used all the levels, but I chose to just calculate three levels from the high and three from the low because that gives a sort of mirror image balance, and that appeals to me, and the utility of the indicator is the same. The plot lines are all colored, and I've filled certain zones between them. There is a center zone filled between both .382 levels, and an upper and lower zone filled between the .786 and either the high or the low. If you like the colored zones, but don't like the plots because they cause screen compression, turn off the plots under the "style" tab. There are alerts for candle closes across every line. I should state that, regarding the fibs, obviously the length of the Channels is going to affect to what levels price retraces to. A shorter lookback means you will see more changes in highs and lows, and therefore retraces are often going to be full retraces within the bands unless price is trending hard. A longer lookback means you will see smaller retraces. Using this in conjunction with key high timeframe levels and/or a moving average can give great confidence in a trade entry. Additionally, if you have a short bias it may help in finding levels or entering a trade on a pullback. It could also be good for trade targets. But again, the lookback you choose for this indicator is going to dictate its use in the system you're building or already have. A 9 EMA and a 200 EMA, while fundamentally the same, are going to be used somewhat differently while doing your chart analysis. Additional images below. Same image as main, but with supertrend and my +UMA to help with chart analysis. Image with the fib stuff turned on. Zoomed out image with the same. Shorter lookback period. Zoomed in image of shorter lookback.
Pine Script® indicator
by ClassicScott
14
Fibonacci Toolkit [LuxAlgo]This toolkit aims to display multiple Fibonacci drawing tools including retracements, arcs, circles, fans, timezones and spirals. Usage Upon adding the indicator to the chart, users will be prompted to choose a starting point and an ending point for the calculation of the drawing tools. Users can then navigate to the settings of the toolkit and choose which drawing tool to display using the Fibonacci drop-down menu. Users are also free to change the default Fibonacci ratios used by the indicator from within the settings. Each tool is described below. Retracements Fibonacci retracements display multiple levels constructed using the starting price point, ending price point, and multiple Fibonacci ratios. These levels can be used as support and resistance. Arcs Fibonacci arcs display multiple semi-circles. Each semi-circle crosses the line connecting the starting & end price point at a certain percentage determined by Fibonacci ratios. These arcs can be used as support and resistance. Circles The Fibonacci circles are similar to the Fibonacci arcs but display a full circle instead. Users can expect the price to bounce off of the circles. This tool is less commonly used by traders. Fan A Fibonacci fan is a tool displaying trendlines all connected to a starting point and extending to a point determined by Fibonacci ratios. These can also be used as support and resistance. Timezone Fibonacci timezones return a series of horizontal lines. The distance of the lines increases by a factor given by the numbers in the Fibonacci sequence. This tool can be useful to highlight points where a trend might reverse assuming that their duration increases over time. Spiral The Fibonnaci spiral displays a spiral that grows by a factor given by the golden ratio. This indicator returns a spiral using 7 turns (5 internal) and sets the origin of the spiral to the ending point which is selected by the user. The height of the spiral is based on the price range between the starting point and ending point. Note that potential display artifacts can be seen when fitting the spiral on stocks and forex pairs.
Pine Script® indicator
by LuxAlgo
35
3rd WaveHello All, In Elliott Wave Theory, 3rd wave is not the shortest one in the waves 1/3/5 and it's usually longest one. so if we can catch it then we may get good opportunities to trade. This script finds 3rd wave experimentally. it can be also the 3rd waves in the waves 1, 3, 5, A and C. the 3rd wave should have greater volume than other waves, the script can check its volume and compare with the volumes of the waves 1 and 2 optionally. Pine Team released Pine version 5! This script was developed in v5 and it uses Library feature of Pine v5 for the zigzag functions. This script is also an example for the Pine developers who learn Pine v5 and Libraries. Options: Zigzag Period: is the length that is used to calculate highest/lowest and the zigzag waves Min/Max Retracements: is the retracement rates to check the wave 2 according to wave 1. for example; if min/max values are 0.500-0.618 then wave 2 must be minimum 0.500 of wave 1 and maximum 0.618 of wave 1. Check Volume Support: is an option to compare the volumes of1. 2. and . waves. if you enable this option then the script checks their volume and 3rd wave volume must be greater then 1 and 2 there are 4 options for the targets. you can enable/disable and change their levels. targets are calculated using length of wave 1. Options to show breakout zone, zigzag, wave 1 and 2. and some options for the colors. The Library that is used in this script: P.S. This is an experimental work and can be improved. So do not hesitate to drop your comments under the script ;) Enjoy!
Pine Script® indicator
by LonesomeTheBlue
105
ZigZag Chart with SupertrendHello All, This script creates Zigzag Chart by using Zigzag waves, so it's timeless chart meaning that no time dependency on X-axis. Optionally it can calculate & show Zigzag Supertrend or Simple Moving Average. Also it can change bar colors of the main chart by trend direction of Zigzag Supertrend. As seen below, each zigzag wave is a candle on Zigzag chart: You have a few options and using these options you can find best settings for the securities/timeframes. You can change Zigzag period, if you change Zigzag Period then all zigzag and the chart is recalculated/reconstructed. You have option to show Zigzag Supertrend or Zigzag Moving Average, the options you have; - You can change ATR Length and ATR multiplier for supertrend - You can change Length for Simple Moving Average You can change Zigzag candle & wick colors using options. Also you have option to change bar colors according to Zigzag Supertrend direction. As it's timeless chart, below you can see how/when bar colors and Zigzag Supertrend change: You can see Simple Moving Average of the Zigzag Candles: You can play with ATR length and multiplier to find best supertrend: You can play with the candle & wick colors: Enjoy!
Pine Script® indicator
by LonesomeTheBlue
42
Auto Phivots S/R [DM]Greetings colleagues Today I share the classic pivot points indicator Added options: Standard levels Fibonacci levels "up to 261'8" Logarithmic scale option //Pivot Points Standard //Pivot Points Standard — is a technical indicator that is used to determine the levels //at which price may face support or resistance. The Pivot Points indicator consists of //a pivot point (PP) level and several support (S) and resistance (R) levels. // //Calculation //PP, resistance and support values are calculated in different ways, depending on //the type of the indicator, specified by the Type field in indicator inputs. To //calculate PP and support/resistance levels, the values OPENcurr, OPENprev, HIGHprev, //LOWprev, CLOSEprev are used, which are the values of the current open and previous //open, high, low and close, respectively, on the indicator resolution. The indicator //resolution is set by the input of the Pivots Timeframe. If the Pivots Timeframe is set //to AUTO (the default value), then the increased resolution is determined by the //following algorithm: // //for intraday resolutions up to and including 15 min, DAY (1D) is used //for intraday resolutions more than 15 min, WEEK (1W) is used //for daily resolutions MONTH is used (1M) //for weekly and monthly resolutions, 12-MONTH (12M) is used
Pine Script® indicator
by dgmoon
Fibonacci LevelsThe 420 VWMA (Volume Weighted Moving Average) per period selected of the low price (Fib 0) and the high price (Fib 1). They are labeled in Color of the line they represent. The other Fib lines are calculated using common fib ratios as follows: longRange_fib2618 = highestHighperLongRange + (highestHighperLongRange - lowestLowperLongRange) * 1.618 longRange_fib1618 = highestHighperLongRange + (highestHighperLongRange - lowestLowperLongRange) * .618 longRange_fib786 = highestHighperLongRange - (highestHighperLongRange - lowestLowperLongRange) * 0.236 longRange_fib618 = highestHighperLongRange - (highestHighperLongRange - lowestLowperLongRange) * 0.382 longRange_fib50 = highestHighperLongRange - (highestHighperLongRange - lowestLowperLongRange) * 0.500 longRange_fib382 = highestHighperLongRange - (highestHighperLongRange - lowestLowperLongRange) * 0.618 longRange_fib236 = highestHighperLongRange - (highestHighperLongRange - lowestLowperLongRange) * 0.764 Those lines are drawn and labeled to right of chart The 2 heavy whites and the short range of the Fib1 (Top) and Fib0 (Bottom). Eyes on chart when it approaches one those two points. This is where I look for continuation or reversal patterns, especially near a Longterm Fib The Red, Green, Yellow and Blue are colored ratio lines that I am experimenting with and will later combine with a multiple time frames to show discernable patterns of potential near future movements. The prices interacts with the fib lines and each of the the colored ratio lines as you go from small to larger time frames. I will be publishing this soon to allow the community to improve on it.
Pine Script® indicator
by BoneFunkenstein
7
Retracer Barcolor With LuckyNickVaFibonacci Input Preset Retracer. This for highlighting your favorite Fibonacci retracement levels. Before using this indicator you should already have knowledge of what Fibonacci is & how to use it. These are levels where it said to be that the market may or may not reverse at. This is more used for anticipation, confluence & should be used in combination with other tools to confirm price action & your own analysis of your expectations. But quickly explained Fibonacci levels are Price Reversal levels that are self fulfilled due to mass trading at these price reversal levels. So the correct way to find opportunity with this script is to use these levels to analyze price action for Pullbacks in the market.
Pine Script® indicator
by Nickafella
Average Daily Range Fibonacci LevelsThe Average Daily Range is a simple concept, calculated as the difference between daily highs and lows averaged over some period. This indicator uses that range in conjunction with Fibonacci ratios to create zones centered on the day's open that tends to act as areas of support and resistance. The thicker White lines are the ADR levels; all other lines are the same value adjusted by the various Fibonacci values. A simpler version of this concept can be seen in my other script, Average Daily Range Zones, which does not include the Fibonacci ratio zones. Thanks to @Hank Hill for the original idea and TV for the feedback and support on the use of the security() function. Also thanks to @GoldenCross for the Fibonacci obsession.
Pine Script® indicator
by colejustice
24
3GBH - Pivot Points & Fib LevelsThis indicator displays Pivot Points & Fib Levels based on the timeframe you select. ----- There are 3-levels of support/resistance to the Pivot Points. ----- Currently there are only Fib-Levels based on the 1st Pivot Levels . Fibs will be added to the other 2 levels in the near future. The Golden Ratio is highlighted by default. ----- The Pivot Line is either green or red depending on whether the price is above or below. ----- Fibonacci tools are quickly becoming a favorite of mine. This helps me to practice working with them, and may help to be more efficient in doing analysis.
Pine Script® indicator
by Clancy3gbh
1
LTB Zigzag CirclesHello All, Today I am here with a new idea and script, " LTB Zigzag Circles ". The idea is to create Circles using last 2 zigzag waves and to catch the breakouts earlier than horizontal lines. if a circle is broken then the script shows entry for Long/Short positions. and if broken circle reappears again then the position is closed. You can change Zigzag period as you wish and see the different results. Here you can see how the script calculates and draws the Circles: Below you can see how the script draws part of the circle on each bar: Optionally the script can show levels: P.S. I haven't tested it as a strategy, Result and Performance may change by Zigzag period, you need to find best Zigzag period according to your strategy. By the way, my Zigzag Circles idea can be improved, if you have any recommendation let me know please ;) Enjoy!
Pine Script® indicator
by LonesomeTheBlue
80
Auto PitchFan, Fib Extension/Retracement and ZigZag by DGT Aᴜᴛᴏ PɪᴛᴄʜFᴀɴ, Fɪʙ Exᴛᴇɴꜱɪᴏɴ/Rᴇᴛʀᴀᴄᴇᴍᴇɴᴛ ᴀɴᴅ ZɪɢZᴀɢ This study aim to automate PitchFan drawing tool and combines it with Fibonacci Extentions/Retracements and ZigZag. Common setting options, applied to all components of the study     Deviation , is a multiplier that affects how much the price should deviate from the previous pivot in order for the bar to become a new pivot. Increasing its value is one way to get higher timeframe Levels     Depth , affects the minimum number of bars that will be taken into account when building     Historical PitchFan / Fibonacci Levels option will allow plotting of PitchFan / Fibonacci Levels on previous Pivot Highs/Lows █  PɪᴛᴄʜFᴀɴ — is a set of rays spreading out of the point of a trend's beginning. These rays inclined with the coefficients formed by a Fibonacci number sequence. It is recommended to adjust the Pitchfan plottings to fit after the first wave of the trend has passed and the correction has clearly begun. PitchFan rays corresponding to Fibonacci levels appear on a chart and represent inclined lines of support and resistance. Price areas near these rays are estimated areas from which the price can turn around or make a significant rebound. The whole logic of working with a pitchfan is based on one simple idea - if the price has bounced off the level, then the correction is likely to end, and the trend will continue. If the price has broken the first resistance, you should wait for the next level test     - Automatically plots PitchFan Rays, based on Pivot Lows/Highs.     - Ability to set ALERTs for each PitchFan Ray Level     - PitchFan Labels displays the price of the line at the last bar, the price value will be recalculated in each new bar Please check the link provided below with the educational post of how to apply pitchfork, application of pitchfan is same keeping in mind the recommendation stated above █  Fɪʙ Rᴇᴛʀᴀᴄᴇᴍᴇɴᴛs / Exᴛᴇɴꜱɪᴏɴꜱ Fibonacci retracements is a popular instrument used by technical analysts to determine support and resistance areas. In technical analysis, this tool is created by taking two extreme points (usually a peak and a trough) on the chart and dividing the vertical distance by the key Fibonacci coefficients equal to 23.6%, 38.2%, 50%, 61.8%, and 100%. Fibonacci extensions are a tool that traders can use to establish profit targets or estimate how far a price may travel AFTER a retracement/pullback is finished. Extension levels are also possible areas where the price may reverse. IMPORTANT NOTE: Fibonacci extensions option may require to do further adjustment of the study parameters for proper usage. Extensions are aimed to be used when a trend is present and they aim to measure how far a price may travel AFTER a retracement/pullback. I will strongly suggest users of this study to check the education post for further details where to use extensions and where to use retracements     - Automatically plots possible Support and Resistance levels, based on Pivot Lows/Highs.     - Ability to set ALERTs for each Fibonacci Extension/Retracement Level     - Labels displays the level and the level price █  Zɪɢ Zᴀɢ — The Zig Zag indicator is used to help identify price trends and changes in price trends. The Zig Zag indicator plots points on a chart whenever prices reverse by a percentage greater than a Deviation variable. Straight lines are then drawn, connecting these points. The Zig Zag indicator serves base for PitchFan and Fibonacci Retracements / Extensions █  OTHER PitchFan is often used in combination with the other indicators and/or drawing tools such as Fibonacci Retracement, Fibonacci Channels, Fibonacci Time Zone and others. It allows identify the most powerful areas from which price can turn and to get more accurate trading signal Andrews’ Pitchfork, how to apply pitchfork and automated pitchfork study Fibonacci Fans, how to apply fibonacci fans and automated fibonacci speed and resistance fans study Fibonacci Extension / Retracement, where to use extensions and where to use retracements and automated fibonacci extension / retracement / pivot points study Others Fibonacci Channels, how to apply fibonacci channels and automated fibonacci channels study Linear Regression Channels, , what linear regression channels are? and linear regression channel/curve/slope study Disclaimer : Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitute professional and/or financial advice. You alone have the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Pine Script® indicator
by dgtrd
72