Get started

Multitimeframe

Xmoon – 3 Push Divergence – PremiumWhat the Xmoon Indicator Does and Why It’s Special The Xmoon Indicator is an advanced and unique analytical tool, built on years of trading experience, research, and development. It is not merely a combination of a few simple indicators; it is a comprehensive, intelligent system that brings together the three main pillars of trading success—strategy, risk management, and trading psychology—into a single integrated tool. Strategy • Xmoon’s core algorithm is based on the 3 Push Divergence pattern in the RSI —a pattern not offered in other indicators. Most existing tools only detect divergence between two highs or two lows, whereas Xmoon can identify three consecutive highs or three consecutive lows with a momentum mismatch, which considerably increases the statistical likelihood of a trend reversal. Risk Management • Automatically calculates the size of each step entry based on per-step capital allocation, leverage, and entry/exit prices, using precise, weighted calculations. • These multi-step calculations run in real time and are shown clearly in the Information Box for quick reading. • A Liquidity Line (risk threshold) is computed for each setup and plotted on the chart so you can see at a glance where the position would be liquidated (futures) or where the analysis is invalidated (spot). Psychology & Decision-Making • From the moment a signal is generated, Xmoon plots all key levels— step entries, risk-free levels, targets, and the liquidity line —so the trader knows from the outset: o where the profitable exit is if the market follows the analysis; o where the break-even (risk-free) exit is if the market moves against the analysis. • This approach significantly reduces stress and emotional decision-making, because both favorable and unfavorable scenarios are predefined. Logic & Workflow of the Xmoon Indicator 1️⃣ Pivot Detection and Classification Xmoon first detects price pivots on the chart and classifies them— based on the bar distance between consecutive pivot highs/lows—into four tiers: Super Minor, Minor, Mid-Major, and Major . The greater the distance between pivots, the larger and more reliable the pivot becomes—though signals are generated less frequently. 2️⃣ Detecting the 3 Push Divergence Pattern At this stage, Xmoon identifies 3 Push Divergence patterns. The pattern forms when price prints three consecutive pivots in the same direction, i.e.: • Bullish: three successive higher highs • Bearish: three successive lower lows Meanwhile, at the corresponding points on the RSI , momentum moves the other way: • Bullish case: RSI peaks step down each time — weakening buying pressure • Bearish case: RSI troughs step up each time — weakening selling pressure This repeated price–momentum disagreement three times in a row can significantly increase the likelihood of a trend reversal. 3️⃣ Plotting the Pattern and Key Levels After the pattern is detected, Xmoon draws the divergence lines and plots the following levels on the chart: • Step entry lines based on the user-defined number of steps and allocated capital. • Risk-free (break-even) lines for exits without profit or loss. • Target lines indicating minimum profit objectives. • Liquidity level (risk threshold) marking where equity would be wiped out in futures. These visuals let the trader see, at a glance, the full picture of the pattern, planned entries/exits, and the risk range. 4️⃣ Information Box After the pattern is detected, Xmoon can display an on-chart Information Box alongside each detected pattern (when enabled in the settings). It includes: • Pivot type: Super Minor, Minor, Mid-Major, or Major. • Confirmation filters: 1. Higher-timeframe trend based on the 200-period moving average (MA200). 2. Higher-timeframe overbought/oversold status based on RSI. • Suggested entry size: based on actual capital and leverage. This box helps the trader quickly see the pattern quality, overall market context, and the suggested position size. ℹ️ Explanation of Confirmation Filters Using these filters can increase signal accuracy. This information is built into the Xmoon indicator, so you don’t need to add any extra indicators or tools to the chart. Xmoon performs the comparisons in real time and displays the filter results in the Information Box . • Higher-timeframe trend filter: If the higher-timeframe trend based on the 200-period moving average (MA200) is bullish, buy/long signals are stronger; if it’s bearish, sell/short signals are stronger. • Higher-timeframe overbought/oversold filter: If RSI is in the overbought zone, the probability of success for sell/short signals is higher; in the oversold zone, the probability of success for buy/long signals is higher. 🧩 What are the components of the Xmoon indicator, and why are they combined? • Core strategy: trend-reversal signals via a proprietary 3 Push Divergence algorithm. • Multi-stage confirmation: higher-timeframe trend based on MA200 , plus higher-timeframe RSI overbought/oversold confirmation. • Advanced position sizing: step-based sizing and weighted averaging . • Structured exit management: risk-free levels, targets , and liquidity level. • Supports fast decision-making: all vital information at a glance. This combination turns Xmoon into a complete, practical system that has not been implemented in this integrated way in any similar tool on TradingView, and it is precisely the sum of these features in a single indicator that sets Xmoon apart from comparable tools. How to Use the Xmoon Indicator 1️⃣ Add to chart: Add the indicator to the chart of your chosen symbol. 2️⃣ Configure parameters: In Settings , adjust the following to match your strategy: • Number of Entry steps: 2 to 10 steps • Pivot type: Super Minor / Minor / Mid-Major / Major • Pattern direction: Bullish / Bearish • Display options: show lines and the Information Box • Capital per trade • Higher-timeframe filters: timeframes for Trend and RSI 3️⃣ Enable alerts: Turn on alerts to receive immediate notifications when a 3 Push Divergence pattern is detected. 4️⃣ Review the Information Box: To assess pattern strength and alignment with the market after a signal appears, check: • Pivot size: Super Minor / Minor / Mid-Major / Major (for gauging pattern strength) • Confirmation filters: 1. Whether the detected pattern aligns with the higher-timeframe trend 2. Whether the detected pattern aligns with the higher-timeframe RSI overbought/oversold condition These details help you decide whether to enter the trade. 5️⃣ Step Entries After reviewing the conditions, open your first position at Step 1 . If price moves against you and reaches the Step 2 level, open a new position there, and continue opening additional positions at each subsequent step level. Whenever price reverses from any of these levels and moves in the direction of your analysis, all open positions will move into profit . In Xmoon, the number of entry steps is fully configurable ( 2 to 10 ). Set it according to your strategy—the system automatically calculates the size of each step based on the capital you allocate. 6️⃣ Exit Management Depending on market conditions, you can choose one of the following: • ⚖️ Exit at the risk-free level: when the market is uncertain and you prefer to close at break-even. • 🎯 Exit at the target level: when price has followed your analysis and you want to realize profit. ⚠️ Liquidity Level • Spot: analysis invalidation point. • Futures: the price at which a leveraged position’s equity would be wiped out. Why the Invite-Only Version of Xmoon Is Worth Getting • Proprietary 3 Push Divergence detection and confirmation that isn’t available in the free version or generic indicators. • Automatic, precise capital and step sizing, with visual plotting of key levels from the moment a signal is issued. • Real-time market context and pattern quality shown in the Information Box—no need to switch timeframes or add extra indicators. • Risk control and psychological support by outlining predefined scenarios from start to finish of the trade. • Limited access to help prevent misuse and reduce users’ financial risk, with dedicated training before activation. • Developed through extensive backtesting and live evaluation; outcomes depend on correct use and market conditions. We sincerely hope you have successful and profitable trades. 📣 If you have any questions or need further guidance, we’ll be happy to hear from you. It’s our pleasure to assist you anytime. 🔻🔻🔻 Persian Section – بخش فارسی 🔻🔻🔻 اندیکاتور ایکسمون چه کاری انجام می‌دهد و چرا خاص است اندیکاتور ایکسمون یک ابزار تحلیلی پیشرفته و منحصربه‌فرد است که حاصل سال‌ها تجربه ترید، تحقیق و توسعه است. این اندیکاتور صرفاً ترکیب چند اندیکاتور ساده نیست، بلکه یک سیستم جامع و هوشمند است که سه رکن اصلی موفقیت در معاملات یعنی استراتژی، مدیریت سرمایه و روانشناسی معامله‌گری را در یک ابزار یکپارچه گردآورده است در بخش استراتژی * الگوریتم اصلی ایکسمون بر اساس الگوی سه‌پوش واگرایی (تری پوش دایورجنس) در آر-اِس-آی طراحی شده است؛ الگویی که در سایر اندیکاتور ها ارائه نشده است، بیشتر ابزارهای موجود تنها واگرایی بین دو قله یا دو کف را تشخیص می‌دهند، در حالی که ایکسمون توانایی شناسایی سه قله یا سه کف متوالی با تضاد مومنتوم را دارد که این موضوع از نظر آماری احتمال بازگشت روند را به‌مراتب افزایش می‌دهد در بخش مدیریت سرمایه * محاسبه خودکار حجم هر پله، بر اساس سرمایه پله ای، لوریج و قیمت‌های ورود/خروج به‌صورت دقیق و وزنی انجام می‌شود * این محاسبات پیچیده برای چندین پله به شکل لحظه‌ای انجام شده و در باکس اطلاعات به ساده‌ترین شکل نمایش داده می‌شود * خط لیکوییدیتی (حد ریسک) برای هر الگو محاسبه و روی نمودار بصورت بصری رسم می‌شود تا کاربر در یک نگاه بداند سرمایه‌اش کجا صفر می‌شود (در فیوچرز) یا تحلیلش کجا باطل می‌شود (در اسپات) در بخش روانشناسی و تصمیم‌گیری * ایکسمون از همان لحظه صدور سیگنال، تمام خطوط کلیدی (ورودی پله‌ای، ریسک‌فری، تارگت، لیکوییدیتی) را رسم می‌کند تا معامله‌گر از ابتدا بداند * اگر بازار طبق تحلیل پیش برود، خروج سودآور کجاست * اگر بازار بر خلاف تحلیل پیش برود، نقطه خروج بی‌ضرر (ریسک‌فری) کجاست * این رویکرد باعث کاهش شدید استرس و تصمیم‌گیری احساسی می‌شود، چون سناریوهای خوش‌بینانه و بدبینانه از پیش مشخص هستند ⚙️ منطق و روش کار اندیکاتور ایکسمون 1️⃣ شناسایی و طبقه‌بندی پیوت‌ها اندیکاتور ایکسمون ابتدا پیوت‌های قیمتی را روی نمودار شناسایی کرده و بر اساس فاصله‌ی کندلی بین سقف یا کف ها، آن‌ها را در چهار دسته طبقه‌بندی می‌کند : سوپر مینور، مینور، میدماژور و ماژور هرچه فاصله بین پیوت ها بیشتر باشد، پیوت بزرگ‌تر و معتبرتر است، اما سیگنال‌ها کمتر تولید می‌شوند 2️⃣ تشخیص الگوی سه‌پوش واگرایی اندیکاتور ایکسمون در این مرحله الگوهای سه‌پوش واگرایی را شناسایی می‌کند، این الگو زمانی شکل می‌گیرد که قیمت سه پیوت متوالی هم‌جهت تشکیل دهد، یعنی * حالت صعودی : سه سقف پیاپی بالاتر از قبلی * حالت نزولی : سه کف پیاپی پایین‌تر از قبلی و همزمان، در نقاط متناظر در آر-اِس-آی حرکت معکوس دیده شود، به این معنا که * حالت صعودی، قله‌های آر-اِس-آی هر بار پایین‌تر از قبلی قرار گیرند - کاهش قدرت خرید * حالت نزولی، دره‌های آر-اِس-آی هر بار بالاتر از قبلی شکل گیرند - کاهش فشار فروش این تضاد قیمت و مومنتوم، وقتی سه بار پیاپی رخ دهد، احتمال بازگشت روند را به‌شدت افزایش می‌دهد 3️⃣ ترسیم الگو و نمایش سطوح کلیدی پس از شناسایی الگو، ایکسمون خطوط واگرایی و همچنین خطوط و سطوح زیر را روی نمودار ترسیم می‌کند، این موارد شامل * 📍 خطوط ورود پله‌ای بر اساس تعداد پله و سرمایه تنظیم‌شده توسط کاربر * ⚖️ خطوط ریسک‌فری برای خروج بدون سود و زیان * 🎯 خطوط تارگت به ‌عنوان سطوح حداقل سود * 🛡 سطح لیکوییدیتی (حد ریسک) برای مشخص‌کردن نقطه صفر شدن سرمایه در معاملات فیوچرز این ترسیمات باعث می‌شود معامله‌گر در یک نگاه تصویر کامل از الگو، سطوح ورود و خروج و محدوده ریسک داشته باشد 4️⃣ باکس اطلاعات پس از شناسایی الگو، اندیکاتور ایکسمون یک باکس اطلاعات تکمیلی در کنار هر الگو نمایش می‌دهد، البته با فعال‌سازی گزینه مربوطه در تنظیمات، باکس اطلاعات در کنار الگو نمایش داده می‌شود و شامل موارد زیر می‌باشد * 🏷 نوع پیوت : سوپر مینور، مینور، میدماژور یا ماژور * 📋 فیلترهای تأییدی یک - جهت روند در تایم‌فریم بالاتر بر اساس میانگین متحرک دویست دو - وضعیت اشباع خرید/فروش در تایم‌فریم بالاتر بر اساس اندیکاتور آر-اِس-آی * 📊 حجم پیشنهادی ورود : بر اساس سرمایه واقعی و لوریج این باکس به معامله‌گر کمک می‌کند در یک نگاه کیفیت الگو، شرایط کلی بازار و حجم پیشنهادی ورود را بداند توضیح درباره فیلترهای تأییدی : استفاده از این فیلترها می‌تواند دقت سیگنال‌ها را افزایش دهد. این اطلاعات در اندیکاتور ایکسمون موجود است و نیازی نیست اندیکاتور یا ابزار اضافه دیگری به چارت اضافه کنید. ایکسمون مقایسه ها را در لحظه انجام میدهد و نتیجه فیلترها را در باکس اطلاعات به شما نشان میدهد * فیلتر جهت روند در تایم‌فریم بالاتر : اگر روند بالاتر بر اساس اِم-اِی-دویست صعودی باشد، سیگنال‌های خرید/لانگ قوی‌تر هستند و بالعکس * فیلتر تشخیص نواحی اشباع خرید/فروش در تایم‌فریم بالاتر : اگر آر-اِس-آی در محدوده اُورباوت باشد، احتمال موفقیت فروش بیشتر است و در محدوده اُورسولد احتمال موفقیت خرید بالاتر می‌رود 🧩 اجزای اندیکاتور ایکسمون چه هستند و چرا این اجزا با هم ترکیب شده‌اند * استراتژی اصلی : سیگنال بازگشت روند با الگوریتم اختصاصی سه‌پوش واگرایی * تأیید چندمرحله‌ای جهت روند در تایم فریم بالاتر بر اساس اِم-اِی-دویست و تایید وضعیت بیشینه خرید/فروش در تایم فریم بالاتر در اندیکاتور آر-اِس-آی * مدیریت سرمایه پیشرفته : محاسبه حجم پله‌ای و میانگین وزنی * مدیریت خروج ساختاریافته : سطوح ریسک‌فری، تارگت، لیکوییدیتی * پشتیبانی از تصمیم‌گیری سریع : همه اطلاعات حیاتی در یک نگاه این ترکیب، ایکسمون را به یک سیستم کامل و کاربردی تبدیل کرده که در هیچ ابزار مشابهی در تریدینگ‌ویو به این شکل یکپارچه پیاده‌سازی نشده است و دقیقاً مجموع این ویژگی‌ها در یک اندیکاتور است که ایکسمون را از ابزارهای مشابه متمایز می‌کند 📖 نحوه استفاده از اندیکاتور ایکسمون 1️⃣ افزودن اندیکاتور به چارت : اندیکاتور را به نمودار نماد دلخواه اضافه کنید 2️⃣ تنظیم پارامترها : از بخش تنظیمات، موارد زیر را بر اساس استراتژی شخصی خودتان مشخص کنید * تعداد پله‌های ورود: از دو تا ده پله * نوع پیوت ها: سوپر مینور/مینور/مید-ماژور/ماژور * نوع الگوها: نزولی/صعودی * نمایش خطوط و باکس اطلاعات * تعیین سرمایه در هر معامله * تایم‌فریم‌های فیلتر اِم-اِی-دویست و آر-اِس-آی 3️⃣ فعال‌سازی هشدارها : برای اطلاع فوری از شناسایی الگوهای سه‌پوش واگرایی ، آلارم‌ها را فعال کنید 4️⃣ بررسی باکس اطلاعات : برای سنجش قدرت الگو و هم‌جهتی با بازار، پس از صدور سیگنال، اطلاعات زیر را در باکس مشکی اطلاعات بررسی کنید * 🏷 نوع پیوت : بررسی میزان قدرت الگو - سوپر مینور، مینور، میدماژور یا ماژور * 📋 فیلترهای تأییدی یک - بررسی هم جهتی الگوی شناسایی شده با جهت روند در تایم‌فریم بالاتر دو - بررسی هم جهتی الگوی شناسایی شده با وضعیت اشباع خرید یا فروش در اندیکاتور آر-اِس-آی در تایم‌فریم بالاتر این اطلاعات به شما کمک می‌کند تصمیم بگیرید که آیا وارد معامله شوید یا خیر 5️⃣ ورود پله‌ای اگر پس از بررسی شرایط تصمیم به ورود گرفتید، اولین پوزیشن را در پله اول باز کنید و در صورتی که بازار در خلاف جهت موردنظر شما حرکت کرد و به سطح پله دوم رسید، یک پوزیشن جدید در همان سطح باز کنید و با رسیدن به سطوح بعدی، پوزیشن های بعدی را باز می کنید هر زمان که بازار از هر یک از این سطوح برگشت و در جهت تحلیل شما حرکت کرد، تمامی پوزیشن‌های باز شده وارد سود می‌شوند در اندیکاتور ایکسمون، تعداد پله‌های ورودی کاملاً قابل‌تنظیم است (بین دو تا ده پله ) و شما می‌توانید بر اساس استراتژی شخصی خود آن را تعیین کنید، سیستم به‌طور خودکار حجم هر پله را بر اساس سرمایه واردشده محاسبه می‌کند 6️⃣ مدیریت خروج بسته به شرایط بازار، می‌توانید یکی از دو روش زیر را انتخاب کنید * ⚖️ خروج در سطح ریسک‌فری : زمانی که بازار نامطمئن است و می‌خواهید بدون سود یا زیان از معامله خارج شوید * 🎯 خروج در سطح تارگت : زمانی که قیمت طبق تحلیل شما حرکت کرده است و بدنبال کسب سود هستید ⚠️سطح لیکوییدیتی * اسپات: نقطه ابطال تحلیل * فیوچرز: نقطه صفر شدن سرمایه پوزیشن با لوریج 💎 چرا نسخه اینوایت اونلی ایکسمون ارزش تهیه دارد * الگوریتم اختصاصی شناسایی و تأیید سه‌پوش واگرایی که در نسخه رایگان یا اندیکاتورهای عمومی وجود ندارد * محاسبات سرمایه و حجم پله‌ای به‌صورت خودکار و دقیق، همراه با رسم بصری سطوح کلیدی از لحظه صدور سیگنال * نمایش آنی شرایط بازار و کیفیت الگو در باکس اطلاعات بدون نیاز به تغییر تایم‌فریم یا افزودن اندیکاتورهای اضافی * کنترل ریسک و پشتیبانی روانی معامله‌گر با ارائه سناریوهای مشخص از ابتدا تا انتهای معامله * دسترسی محدود برای جلوگیری از استفاده نادرست و کاهش ریسک مالی کاربران، همراه با آموزش اختصاصی پیش از فعال‌سازی * اثبات‌شده در تست‌ها و معاملات واقعی با نتایج قابل اتکا، به شرط استفاده صحیح بر اساس آموزش صمیمانه امیدواریم معاملات موفق و پرسودی داشته باشید 📣 اگر سوالی دارید یا نیاز به راهنمایی بیشتری دارید، خوشحال می‌شویم از ما بپرسید با کمال میل در خدمت‌تان هستیم
Pine Script® indicator
by XmoonTradeClub
Multi Moving Average System with MACDDetailed Description of "Multi Moving Average System with MACD" Indicator This indicator is designed to help traders identify the direction and strength of market trends. It combines several technical tools that work together to provide a more complete picture of market conditions. What are Moving Averages and how do they work? Moving Averages (MA) are lines on a chart that show the average price over a specific period. They smooth out price fluctuations, making it easier to see the overall direction of price movement. This indicator uses 5 moving averages with different periods: - MA1 (9 periods) - the fastest line, reacts to short-term changes - MA2 (18 periods) - slightly slower, shows short-term trend - MA3 (50 periods) - medium-term moving average - MA4 (72 periods) - shows medium-term trend - MA5 (200 periods) - the slowest, shows long-term trend When price is above these lines - it may indicate an uptrend, and when below - a downtrend. What is MACD and how is it used? MACD (Moving Average Convergence Divergence) is an oscillator that helps determine trend strength and direction, as well as potential reversal points. In this indicator, MACD is used for: - Determining trend strength (weak, medium, strong) - Identifying potential trend changes (MACD line crossovers) - Confirming signals from moving averages How candle coloring works (important for understanding the trend) One of the key features of this indicator is the color marking of candles, which helps visually determine the current market condition: - **Strong uptrend (green)**: when the closing price is above both MA1 and MA2 simultaneously - **Strong downtrend (red)**: when the closing price is below both MA1 and MA2 simultaneously - **Bullish signal (light green)**: when price crosses MA1 from below upward (potential start of an uptrend) - **Bearish signal (light red)**: when price crosses MA1 from above downward (potential start of a downtrend) - **Neutral state (gray)**: when none of the other color conditions are met **It's important to understand the coloring mechanism:** - Already formed (closed) candles **do not change their color** - their coloring is permanently fixed - The current (not closed) candle may change color as the price moves during the formation of the bar - This is not "repainting" in the negative sense (when signals change retroactively), but a natural process of forming the current candle - This approach does not mislead, as it shows only the current state relative to moving averages What does the indicator display? 1. **Five colored lines on the chart** - these are moving averages with different periods. Their crossovers help determine the trend. 2. **Information panel**: - "Trend" - shows current market condition (Max Bullish, Bullish, Weak Bullish, Weak Bearish, Bearish, Max Bearish) with corresponding color - "RSI" - Relative Strength Index value, showing overbought/oversold conditions - "ADX" - Average Directional Index value, showing trend strength 3. Support and resistance levels: - MA4 and MA5 from higher timeframe (e.g., 4-hour chart when trading on 15-minute chart) - Mirror levels, calculated mathematically using the formula. These are not subjective levels, but strict mathematical calculations based on market symmetry principle mentioned in John Murphy's book "Technical Analysis of Financial Markets". This approach helps identify potential reversal points where price may react to symmetrical reflection relative to a price level. 4. Signals on the chart: - MACD and signal line crossovers (crosses) - Signal line crossing zero level (triangles) - **MACD line crossing zero level (circles)**: * Green circles below candles - when MACD line crosses zero level from below upward * Red circles above candles - when MACD line crosses zero level from above downward How to interpret the signals? - **Strong uptrend (Max Bullish)**: when price is above MA1 and MA2, MACD is above zero line and above signal line with sufficient histogram amplitude - **Weak uptrend (Weak Bullish)**: when MACD is above signal line but below zero line (potential reversal) - **Strong downtrend (Max Bearish)**: when price is below MA1 and MA2, MACD is below zero line and below signal line with sufficient histogram amplitude - **Weak downtrend (Weak Bearish)**: when MACD is below signal line but above zero line (potential reversal) Higher timeframe configuration One of the unique features of this indicator is the flexible configuration of higher timeframe linkage: - **Auto-detection (Auto)** - the indicator automatically selects the most appropriate higher timeframe based on the current working timeframe - **Special profiles** - you can choose a preset for a specific market type: * **Crypto** - optimized for cryptocurrencies (accounts for 24/7 trading mode) * **Forex** - optimized for forex market (accounts for 24-hour trading with breaks) * **Stocks** - optimized for stock market (accounts for exchange trading hours) - **Manual configuration (Manual)** - complete flexibility: you can specify which higher timeframe to use for each specific current timeframe (from 1 minute to monthly) This feature allows adapting the indicator to the characteristics of any market and any trading style, providing relevant analysis for both scalpers and position traders. How to customize the indicator? You can adjust: - Types and periods of moving averages - Colors for different signals and levels - Display of additional elements (levels, mirrors, signals) - Filters (volume, RSI, ADX) - Connection to higher timeframes Important! This indicator follows standard technical analysis principles and contains no secret algorithms. It is provided exclusively for informational and educational purposes. Technical analysis does not guarantee future results, and before making trading decisions, it is recommended to use additional analysis methods and consider your risk tolerance.
Pine Script® indicator
by DeDoFFtrade
5
samc's - Keltner OscillatorThe KELTNER CHANNEL is a widely used technical indicator developed in the 60's by Chester W. Keltner who described it in his 1960 book How To Make Money in Commodities. so i took the logic, simplified the code and made into an oscillator. to add a flavor of modern times you can choose among 10 different colorways themes in the settings. (so traders can adjust it for dark or light charts) Although the initial idea was developed for stocks and commodities, I've carefully back tested this as an oscillator across FX MAJORS , MINORS and high liquidity stocks for the use case of scalping and Medium term trade ideas. now, this indicator works successfully over all time frames, custom time frames and all assets. This script builds on the same approach as my earlier session tool — keeping things clean, visual, and easy to read. I intend to publish more of my work as i develop them from Beta ideas into stable scripts, and i welcome feedback.
Pine Script® indicator
by Drsamc
samc's FX SESSIONS - on candles So, based on my 8 yrs of experience and over a 2 decade worth of back testing on FX majors pairs one thing i can univocally affirm to the fact that Timing is everything especially in the currency markets. so i made this indicator to help reduce the noise and focus on signals which is coded by time, now i made this as GMT+8 in focus but you can adjust based on your requirements. I classified my indicator colors according to the inter-SESSION High Impact areas only as following : Primary session colors: ASIAN - YELLOW EU - BLUE US - Magenta (light) and every first 10 mins of the hour (Great for scalping) i marked them in a shade of grey. secondary sessions i marked them as minor sessions. PRE-EU 1hr of expected trend i marked in color green and after hours in a shade of color violet. so i usually make my candles into light grey by default and remove the body and wicks to minimize the visual stimulus so that this indicator will work great with both dark and light themes and does not obstruct other indicators. also i made an option to uncheck my naming scheme of session on the top right.
Pine Script® indicator
by Drsamc
Multi-Timeframe 200 EMAMulti-Timeframe 200 EMA Indicator This indicator plots five 200-period Exponential Moving Averages (EMAs) on your chart, each from a different timeframe: 1-hour, 2-hour, 4-hour, 8-hour, and 1-day. What It Does: Analyzes Higher Timeframes: It uses the request.security() function to fetch data from higher timeframes. This allows you to see significant long-term support and resistance levels from higher timeframes, all on your current chart. Customizable: You can easily turn each EMA line on or off individually in the indicator's settings. By default, the 1-hour and 1-day EMAs are off, so you can focus on the intermediate timeframes right away. Clean and Simple: The indicator is designed to be clean and easy to read, with different colors for each EMA line to help you quickly identify the different timeframes at a glance. This is a powerful tool for trend analysis and identifying key price levels, helping you make more informed trading decisions.
Pine Script® indicator
by andreaspastor
CISD with deviationsChange in State Delivery (CISD) is a well-recognized concept and serves as a key signal for identifying market direction through the behavior of CISD levels. In this approach, CISD is applied as the core measure of market structure, removing the variability that comes from user-defined interpretations. How does it works : Identifies CISD levels as the market delivers price. Track whether price respects or violates these levels. A confirmed shift (change in state) signals a potential transition in trend Provides a clean structure map to guide execution How to use it : 1)Align CISD shifts with your higher timeframe bias and the deviation levels marked by the indicator which often serve as the area for retracement or continuations. 2) Use CISD confirmation as a filter for trade entries. 3) Combine with liquidity pools, FVGs, or session timing for added confluence. Features covered : 1) Automatic Bearish and Bullish CISD plotting. 2) Anchored Fibonacci levels are plotted based on the confirmed CISD. The Fibonacci levels are fixed and cannot be modified by the user because these levels serve a purpose. 3) Alerts can be set up by the users for whenever a bearish/bullish CISD is confirmed. 4) Automatic invalidations are set so that when price invalidates a CISD or hits the -4 level of a CISD as full target level, the CISD is automatically removed. 5) Currently , the maximum CISDs visible are limited to 3 each (bullish and bearish) to avoid cluttering on the chart.
Pine Script® indicator
by AkariFX
9
CNS - Multi-Timeframe Bollinger Band OscillatorMy hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. I’ve been having good results setting the “Bollinger Band MA Length” in the Input tab to between 5 and 10. You can use the standard 20 period, but your results will not be as granular. This indicator has proven very good at finding local tops and bottoms by combining data from multiple timeframes. Use BB timeframes that are lower than the timeframe you are viewing in your price pane. The default settings work best on the weekly timeframe, but can be adjusted for most timeframes including intraday. Be cognizant that the indicator, like other oscillators, does occasionally produce divergences at tops and bottoms. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script® indicator
by chicagonativeson
Multi-Timeframe Bollinger BandsMy hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. I’ve been having good results setting the “Bollinger Band MA Length” in the Input tab to between 5 and 10. You can use the standard 20 period, but your results will not be as granular. This indicator has proven very good at finding local tops and bottoms by combining data from multiple timeframes. Use timeframes that are lower than the timeframe you are viewing in your price pane. Be cognizant that the indicator, like other oscillators, does occasionally produce divergences at tops and bottoms. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script® indicator
by chicagonativeson
Multi-Timeframe Bollinger Band PositionBeta version. My hope is to optimize the settings for this indicator and reintroduce it as a "strategy" with suggested position entry and exit points shown in the price pane. Any feedback is appreciated. Overview This indicator is an oscillator that measures the normalized position of the price relative to Bollinger Bands across multiple timeframes. It takes the price's position within the Bollinger Bands (calculated on different timeframes) and averages those positions to create a single value that oscillates between 0 and 1. This value is then plotted as the oscillator, with reference lines and colored regions to help interpret the price's relative strength or weakness. How It Works Bollinger Band Calculation: The indicator uses a custom function f_getBBPosition() to calculate the position of the price within Bollinger Bands for a given timeframe. Price Position Normalization: For each timeframe, the function normalizes the price's position between the upper and lower Bollinger Bands. It calculates three positions based on the high, low, and close prices of the requested timeframe: pos_high = (High - Lower Band) / (Upper Band - Lower Band) pos_low = (Low - Lower Band) / (Upper Band - Lower Band) pos_close = (Close - Lower Band) / (Upper Band - Lower Band) If the upper band is not greater than the lower band or if the data is invalid (e.g., na), it defaults to 0.5 (the midline). The average of these three positions (avg_pos) represents the normalized position for that timeframe, ranging from 0 (at the lower band) to 1 (at the upper band). Multi-Timeframe Averaging: The indicator fetches Bollinger Band data from four customizable timeframes (default: 30min, 60min, 240min, daily) using request.security() with lookahead=barmerge.lookahead_on to get the latest available data. It calculates the normalized position (pos1, pos2, pos3, pos4) for each timeframe using f_getBBPosition(). These four positions are then averaged to produce the final avg_position:avg_position = (pos1 + pos2 + pos3 + pos4) / 4 This average is the oscillator value, which is plotted and typically oscillates between 0 and 1. Moving Averages: Two optional moving averages (MA1 and MA2) of the avg_position can be enabled, calculated using simple moving averages (ta.sma) with customizable lengths (default: 5 and 10). These can be potentially used for MA crossover strategies. What Is Being Averaged? The oscillator (avg_position) is the average of the normalized price positions within the Bollinger Bands across the four selected timeframes. Specifically:It averages the avg_pos values (pos1, pos2, pos3, pos4) calculated for each timeframe. Each avg_pos is itself an average of the normalized positions of the high, low, and close prices relative to the Bollinger Bands for that timeframe. This multi-timeframe averaging smooths out short-term fluctuations and provides a broader perspective on the price's position within the volatility bands. Interpretation: 0.0 The price is at or below the lower Bollinger Band across all timeframes (indicating potential oversold conditions). 0.15: A customizable level (green band) which can be used for exiting short positions or entering long positions. 0.5: The midline, where the price is at the average of the Bollinger Bands (neutral zone). 0.85: A customizable level (orange band) which can be used for exiting long positions or entering short positions. 1.0: The price is at or above the upper Bollinger Band across all timeframes (indicating potential overbought conditions). The colored regions and moving averages (if enabled) help identify trends or crossovers for trading signals. Example: If the 30min timeframe shows the close at the upper band (position = 1.0), the 60min at the midline (position = 0.5), the 240min at the lower band (position = 0.0), and the daily at the upper band (position = 1.0), the avg_position would be:(1.0 + 0.5 + 0.0 + 1.0) / 4 = 0.625 This value (0.625) would plot in the orange region (between 0.85 and 0.5), suggesting the price is relatively strong but not at an extreme. Notes: The use of lookahead=barmerge.lookahead_on ensures the indicator uses the latest available data, making it more real-time, though its effectiveness depends on the chart timeframe and TradingView's data feed. The indicator’s sensitivity can be adjusted by changing bb_length ("Bollinger Band MA Length" in the Input tab), bb_mult ("Bollinger Band Standard Deviation," also in the Input tab), or the selected timeframes.
Pine Script® indicator
by chicagonativeson
Screener based on Profitunity strategy for multiple timeframes Screener based on Profitunity strategy by Bill Williams for multiple timeframes (max 5, including chart timeframe) and customizable symbol list. The screener analyzes the Alligator and Awesome Oscillator indicators, Divergent bars and high volume bars. The maximum allowed number of requests (symbols and timeframes) is limited to 40 requests, for example, for 10 symbols by 4 requests of different timeframes. Therefore, the indicator automatically limits the number of displayed symbols depending on the number of timeframes for each symbol, if there are more symbols than are displayed in the screener table, then the ordinal numbers are displayed to the left of the symbols, in this case you can display the next group of symbols by increasing the value by 1 in the "Show tickers from" field, if the "Group" field is enabled, or specify the symbol number by 1 more than the last symbol in the screener table. 👀 When timeframe filtering is applied, the screener table displays only the columns of those timeframes for which the filtering value is selected, which allows displaying more symbols. For each timeframe, in the "TIMEFRAMES > Prev" field, you can enable the display of data for the previous bar relative to the last (current) one, if the market is open for the requested symbol. In the "TIMEFRAMES > Y" field, you can enable filtering depending on the location of the last five bars relative to the Alligator indicator lines, which are designated by special symbols in the screener table: ⬆️ — if the Alligator is open upwards (Lips > Teeth > Jaw) and none of the bars is closed below the Lips line; ↗️ — if one of the bars, except for the penultimate one, is closed below Lips, or two bars, except for the last one, are closed below Lips, or the Alligator is open upwards only below four bars, but none of the bars is closed below Lips; ⬇️ — if the Alligator is open downwards (Lips < Teeth < Jaw), but none of the bars is closed above Lips; ↘️ — if one of the bars, except the penultimate one, is closed above the Lips, or two bars, except the last one, are closed above the Lips, or the Alligator is open down only above four bars, but none of the bars are closed above the Lips; ➡️ — in other cases, including when the Alligator lines intersect and one of the bars is closed behind the Lips line or two bars intersect one of the Alligator lines. In the "TIMEFRAMES > Show bar change value for TF" field, you can add a column to the right of the selected timeframe column with the percentage change between the closing price of the last bar (current) and the closing price of the previous bar ((close – previous close) / previous close * 100). Depending on the percentage value, the background color of the screener table cell will change: dark red if <= -3%; red if <= -2%, light red if <= -0.5%; dark green if >= 3%; green if >= 2%; light green if >= 0.5%. For each timeframe, the screener table displays the symbol of the latest (current) bar, depending on the closing price relative to the bar's midpoint ((high + low) / 2) and its location relative to the Alligator indicator lines: ⎾ — the bar's closing price is above its midpoint; ⎿ — the bar's closing price is below its midpoint; ├ — the bar's closing price is equal to its midpoint; 🟢 — Bullish Divergent bar, i.e. the bar's closing price is above its midpoint, the bar's high is below all Alligator lines, the bar's low is below the previous bar's low; 🔴 — Bearish Divergent bar, i.e. the bar's closing price is below its midpoint, the bar's low is above all Alligator lines, the bar's high is above the previous bar's high. When filtering is enabled in the "TIMEFRAMES > Filtering by Divergent bar" field, the data in the screener table cells will be displayed only for those timeframes that have a Divergent bar. A high bar volume signal is also displayed — 📶/📶² if the bar volume is greater than 40%/70% of the average volume value calculated using a simple moving average (SMA) in the 140 bar interval from the last bar. In the indicator settings in the "SYMBOL LIST" field, each ticker (for example: OANDA:SPX500USD) must be on a separate line. If the market is closed, then the data for requested symbols will be limited to the time of the last (current) bar on the chart, for example, if the current symbol was traded yesterday, and the requested symbol is traded today, when requesting data for an hourly timeframe, the last bar will be for yesterday, if the timeframe of the current chart is not higher than 1 day. Therefore, by default, a warning will be displayed on the chart instead of the screener table that if the market is open, you must wait for the screener to load (after the first price change on the current chart), or if the highest timeframe in the screener is 1 day, you will be prompted to change the timeframe on the current chart to 1 week, if the screener requests data for the timeframe of 1 week, you will be prompted to change the timeframe on the current chart to 1 month, or switch to another symbol on the current chart for which the market is open (for example: BINANCE:BTCUSDT), or disable the warning in the field "SYMBOL LIST > Do not display screener if market is close". The number of the last columns with the color of the AO indicator that will be displayed in the screener table for each timeframe is specified in the indicator settings in the "AWESOME OSCILLATOR > Number of columns" field. For each timeframe, the direction of the trend between the price of the highest and lowest bars in the specified range of bars from the last bar is displayed — ↑ if the trend is up (the highest bar is to the right of the lowest), or ↓ if the trend is down (the lowest bar is to the right of the highest). If there is a divergence on the AO indicator in the specified interval, the symbol ∇ is also displayed. The average volume value is also calculated in the specified interval using a simple moving average (SMA). The number of bars is set in the indicator settings in the "INTERVAL FOR HIGHEST AND LOWEST BARS > Bars count" field. In the indicator settings in the "STYLE" field you can change the position of the screener table relative to the chart window, the background color, the color and size of the text. *** Скринер на основе стратегии Profitunity Билла Вильямса для нескольких таймфреймов (максимум 5, включая таймфрейм графика) и настраиваемого списка символов. Скринер анализирует индикаторы Alligator и Awesome Oscillator, Дивергентные бары и бары с высоким объемом. Максимально допустимое количество запросов (символы и таймфреймы) ограничено 40 запросами, например, для 10 символов по 4 запроса разных таймфреймов. Поэтому в индикаторе автоматически ограничивается количество отображаемых символов в зависимости от количества таймфреймов для каждого символа, если символов больше чем отображено в таблице скринера, то слева от символов отображаются порядковые номера, в таком случае можно отобразить следующую группу символов, увеличив значение на 1 в настройках индикатора поле "Show tickers from", если включено поле "Group", или указать номер символа на 1 больше, чем последний символ в таблице скринера. 👀 Когда применяется фильтрация по таймфрейму, в таблице скринера отображаются только столбцы тех таймфреймов, для которых выбрано значение фильтрации, что позволяет отображать большее количество символов. Для каждого таймфрейма в настройках индикатора в поле "TIMEFRAMES > Prev" можно включить отображение данных для предыдущего бара относительно последнего (текущего), если для запрашиваемого символа рынок открыт. В поле "TIMEFRAMES > Y" можно включить фильтрацию, в зависимости от расположения последних пяти баров относительно линий индикатора Alligator, которые обозначаются специальными символами в таблице скринера: ⬆️ — если Alligator открыт вверх (Lips > Teeth > Jaw) и ни один из баров не закрыт ниже линии Lips; ↗️ — если один из баров, кроме предпоследнего, закрыт ниже Lips, или два бара, кроме последнего, закрыты ниже Lips, или Alligator открыт вверх только ниже четырех баров, но ни один из баров не закрыт ниже Lips; ⬇️ — если Alligator открыт вниз (Lips < Teeth < Jaw), но ни один из баров не закрыт выше Lips; ↘️ — если один из баров, кроме предпоследнего, закрыт выше Lips, или два бара, кроме последнего, закрыты выше Lips, или Alligator открыт вниз только выше четырех баров, но ни один из баров не закрыт выше Lips; ➡️ — в остальных случаях, в то числе когда линии Alligator пересекаются и один из баров закрыт за линией Lips или два бара пересекают одну из линий Alligator. В поле "TIMEFRAMES > Show bar change value for TF" можно добавить справа от выбранного столбца таймфрейма столбец с процентным изменением между ценой закрытия последнего бара (текущего) и ценой закрытия предыдущего бара ((close – previous close) / previous close * 100). В зависимости от величины процента будет меняться цвет фона ячейки таблицы скринера: темно-красный, если <= -3%; красный, если <= -2%, светло-красный, если <= -0.5%; темно-зеленый, если >= 3%; зеленый, если >= 2%; светло-зеленый, если >= 0.5%. Для каждого таймфрейма в таблице скринера отображается символ последнего (текущего) бара, в зависимости от цены закрытия относительно середины бара ((high + low) / 2) и расположения относительно линий индикатора Alligator: ⎾ — цена закрытия бара выше его середины; ⎿ — цена закрытия бара ниже его середины; ├ — цена закрытия бара равна его середине; 🟢 — Бычий Дивергентный бар, т.е. цена закрытия бара выше его середины, максимум бара ниже всех линий Alligator, минимум бара ниже минимума предыдущего бара; 🔴 — Медвежий Дивергентный бар, т.е. цена закрытия бара ниже его середины, минимум бара выше всех линий Alligator, максимум бара выше максимума предыдущего бара. При включении фильтрации в поле "TIMEFRAMES > Filtering by Divergent bar" данные в ячейках таблицы скринера будут отображаться только для тех таймфреймов, где есть Дивергентный бар. Также отображается сигнал высокого объема бара — 📶/📶², если объем бара больше чем на 40%/70% среднего значения объема, рассчитанного с помощью простой скользящей средней (SMA) в интервале 140 баров от последнего бара. В настройках индикатора в поле "SYMBOL LIST" каждый тикер (например: OANDA:SPX500USD) должен быть на отдельной строке. Если рынок закрыт, то данные для запрашиваемых символов будут ограничены временем последнего (текущего) бара на графике, например, если текущий символ торговался последний день вчера, а запрашиваемый символ торгуется сегодня, при запросе данных для часового таймфрейма, последний бар будет за вчерашний день, если таймфрейм текущего графика не выше 1 дня. Поэтому по умолчанию на графике будет отображаться предупреждение вместо таблицы скринера о том, что если рынок открыт, то необходимо дождаться загрузки скринера (после первого изменения цены на текущем графике), или если в скринере самый высокий таймфрейм 1 день, то будет предложено изменить на текущем графике таймфрейм на 1 неделю, если в скринере запрашиваются данные для таймфрейма 1 неделя, то будет предложено изменить на текущем графике таймфрейм на 1 месяц, или же переключиться на другой символ на текущем графике, для которого рынок открыт (например: BINANCE:BTCUSDT), или отключить предупреждение в поле "SYMBOL LIST > Do not display screener if market is close". Количество последних столбцов с цветом индикатора AO, которые будут отображены в таблице скринера для каждого таймфрейма, указывается в настройках индикатора в поле "AWESOME OSCILLATOR > Number of columns". Для каждого таймфрейма отображается направление тренда между ценой самого высокого и самого низкого баров в указанном интервале баров от последнего бара — ↑, если тренд направлен вверх (самый высокий бар справа от самого низкого), или ↓, если тренд направлен вниз (самый низкий бар справа от самого высокого). Если есть дивергенция на индикаторе AO в указанном интервале, то также отображается символ — ∇. В указанном интервале также рассчитывается среднее значение объема с помощью простой скользящей средней (SMA). Количество баров устанавливается в настройках индикатора в поле "INTERVAL FOR HIGHEST AND LOWEST BARS > Bars count". В настройках индикатора в поле "STYLE" можно изменить положение таблицы скринера относительно окна графика, цвет фона, цвет и размер текста.
Pine Script® indicator
by grigorykov
Market structure + TF Bucket Market Structure + TF Bucket This Pine Script™ indicator, published under the Mozilla Public License 2.0, extends the "Market Structure" script by mickes (), with full credit to mickes. It integrates the enhanced MarketStructure library by Fenomentn (), also based on mickes’ library under MPL 2.0, to provide advanced market structure analysis with multi-timeframe pivot length customization. Functionality Market Structure Analysis: Detects internal (orderflow) and swing market structures, visualizing Break of Structure (BOS), Change of Character (CHoCH), Equal High/Low (EQH/EQL), and liquidity zones using the MarketStructure library. Timeframe Bucket (TF Bucket): Dynamically adjusts pivot lengths for six user-defined timeframes (e.g., 3m, 5m, 10m, 15m, 4h, 12h), optimizing structure detection across different chart timeframes. Trend Strength Visualization: Displays a trend strength metric (from the library) for internal and swing structures, indicating trend reliability based on pivot frequency and volatility. Statistics Table: Shows yearly counts of BOS and CHoCH events for internal and swing structures, configurable by a user-defined period. Screener Support: Outputs BOS and CHoCH signals for TradingView’s screener, with a configurable signal persistence period. Customizable Alerts: Enables alerts for BOS and CHoCH events, separately configurable for internal and swing structures. Methodology Pivot Detection: Uses the library’s Pivot function, which applies a volatility filter (ATR-based) to confirm significant pivots, reducing false signals in low-volatility markets. TF Bucket: Maps user-selected timeframes to Pine Script’s timeframe.period using f_getTimeframePeriod, applying custom pivot lengths when the chart’s timeframe matches a selected one (or base lengths in Static mode). Trend Strength: Calculates a score as pivotCount / LeftLength * (currentATR / ATR), displayed via labels to help traders assess trend reliability. BOS/CHoCH Detection: Identifies BOS when price breaks a pivot in the trend direction and CHoCH when price reverses against the trend, labeling events as “MSF” or “MSF+” based on pivot patterns. EQH/EQL and Liquidity: Draws boxes for equal high/low zones within ATR-based thresholds and visualizes liquidity levels with confirmation bars. Statistics and Screener: Tracks BOS/CHoCH events in a yearly table and outputs signals for screener use, with persistence controlled by a user-defined period. Usage Integration: Apply the indicator to any chart and import the library via import Fenomentn/MarketStructure/1. Configuration: Set up to six timeframes with custom pivot lengths, enable/disable internal and swing structures, configure alerts, and adjust statistics years in the settings panel. Alerts: Enable BOS and CHoCH alerts for real-time notifications, triggered on bar close to avoid repainting. Screener: Use the plotted signals to monitor BOS/CHoCH events across multiple tickers in TradingView’s screener. Best Practices: Optimal for forex and crypto charts on 1m to 12h timeframes. Adjust pivot lengths and the library’s volatility threshold for specific market conditions. Originality This indicator enhances mickes’ original script with: Timeframe Bucket: Dynamic pivot length selection for multi-timeframe analysis, not present in the original. Trend Strength Display: Visualizes the library’s TrendStrength metric for enhanced trend analysis. Enhanced Library Integration: Leverages Fenomentn/MarketStructure/1, which adds a volatility-based pivot filter, dynamic label sizing, and customizable BOS/CHoCH visualization styles.No additional open-source code was reused beyond mickes’ script and library, fully credited under MPL 2.0.
Pine Script® indicator
by Fenomentn
Timeless Command | QuantEdgeB🔍 Overview Timeless Command is a multi-asset, multi-timeframe “sentiment dashboard” built around a custom Universal Strategy. It fuses two independent proprietary oscillators into one normalized signal, then snapshots that signal across six user-chosen assets and six user-chosen timeframes—right on your price chart. You instantly see whether Bitcoin, Ethereum, Gold, the U.S. Dollar Index, the S&P 500 or the Nasdaq are “Bullish” or “Bearish” from the 2-day down to the 15-minute horizon, plus an overall bias and bar-color overlays. ✨ Key Features • 🧠 Universal Strategy o Combines two independent strategic modules into a single oscillator. o Applies upper/lower thresholds to generate Long/Short/Neutral signals. • 🌐 Multi-Asset, Multi-TF Grid o Up to six symbols (e.g. BTC, ETH, SPX, NDX, GOLD, DXY). o Six configurable timeframes (days, hours, minutes). o Automatic conversion of “4H” → “240” minutes for seamless request.security calls. • 📊 Live Sentiment Table o Arrow icons per asset/timeframe (“⬆️” vs “⬇️”). o Per-asset average bias (“Bullish” / “Bearish” / “Neutral”), color-coded. o Clean, right-aligned table overlay with asset labels and timeframe headers. • 🎨 Chart Overlays o Bar coloring driven by the first asset’s average TPI bias. o Two EMAs (default 12/21) filled to show trend direction. o Optional mini info table to explain bar-color logic. ⚙️ How It Works 1. Signal Calculation o Applies thresholds (±0.1) to yield discrete signals from a Universal Strategy: +1 (long), –1 (short), 0 (neutral). 2. Multi-TF Signal Gathering o For each asset, the script uses request.security to pull the TPI on each selected timeframe, locking values at bar close for consistency. o Converts each reading into a binary direction (up/down). 3. Averaging & Labeling o Averages the six directional values per asset to gauge overall bias. o Renders a “Bullish” or “Bearish” label (or “Neutral” if exactly zero). 4. Visual Overlay o Bar Color: The chart’s candles recolor based on the first asset’s average bias—blue for bullish, orange for bearish, gray for neutral. o EMAs: Two exponential moving averages sweep the chart, filled to highlight trending regimes. 5. Dashboard Table o Rows = assets, columns = timeframes + “Average” column. o Each cell shows an arrow icon with background shading. o Last column spells out the per-asset average bias in styled text and color. 🎯 Who Should Use It • Macro Traders who want a quick cross-market heatmap. • Multi-Asset Strategists balancing exposure across crypto, equities, FX and commodities. • Systematic & Discretionary players looking for unified, threshold-based signals. • Risk Managers needing a real-time sentinel on regime shifts across key markets. ⚙️ Default Settings • Assets: BTCUSD, ETHUSD, SPX, NDX, GOLD, DXY • Timeframes: 2D, 1D, 12H, 4H, 1H, 15m • Thresholds: ±0.1 for long/short entries 📌 Conclusion With Timeless Command, you gain an at-a-glance “command center” for cross-market sentiment. It turns complex, multi-TF oscillator data into a simple arrow-and-table view, coloring your price bars to reinforce the prevailing bias. Whether you’re hunting trend continuations, regime changes or mean-reversion setups, this overlay gives you the high-level context you need—without digging through six different charts. 🔹 Disclaimer: Past performance is not indicative of future results. No trading strategy can guarantee success in financial markets. 🔹 Strategic Advice: Always backtest, optimize, and align parameters with your trading objectives and risk tolerance before live trading.
Pine Script® indicator
by QuantEdgeB
Changing of the GuardChanging of the Guard (COG) - Advanced Reversal Pattern Indicator 🎯 What It Does The Changing of the Guard (COG) indicator identifies high-probability reversal setups by detecting specific candlestick patterns that occur at key institutional levels. This indicator combines traditional price action analysis with volume-weighted and moving average confluence to filter out noise and focus on the most reliable trading opportunities. 🔧 Key Features Multi-Timeframe VWAP Analysis • Daily VWAP (Gray circles) - Intraday institutional reference • Weekly VWAP (Yellow circles) - Short-term institutional bias • Monthly VWAP (Orange circles) - Long-term institutional sentiment Triple EMA System • EMA 20 (Blue) - Short-term trend direction • EMA 50 (Purple) - Medium-term momentum • EMA 200 (Navy) - Long-term market structure Adaptive COG Pattern Detection • 2-Bar Mode: Quick reversal signals for scalping • 3-Bar Mode: Balanced approach for swing trading (default) • 4-Bar Mode: Conservative signals for position trading 📊 How It Works The indicator identifies "changing of the guard" moments when: 1. Pattern Formation: 2-4 consecutive bars show exhaustion in one direction 2. Reversal Confirmation: A counter-trend bar appears with strong momentum 3. Confluence Trigger: The reversal bar crosses through a significant VWAP or EMA level Bullish COG: Green triangle appears below bars when bearish exhaustion meets bullish reversal at key support Bearish COG: Red triangle appears above bars when bullish exhaustion meets bearish reversal at key resistance 💡 Trading Applications Swing Trading: Use 3-bar mode with EMA 50/200 confluence for multi-day holds Day Trading: Use 2-bar mode with Daily VWAP confluence for intraday reversals Position Trading: Use 4-bar mode with Monthly VWAP confluence for major trend changes ⚙️ Customization Options • Toggle VWAP display on/off • Toggle EMA display on/off • Toggle COG signals on/off • Select detection mode (2-bar, 3-bar, 4-bar) • Built-in alert system for automated notifications 🎨 Visual Design Clean, professional interface with: • Subtle dotted lines for VWAPs to avoid chart clutter • Color-coded EMAs for easy trend identification • Clear triangle signals that don't obstruct price action • Customizable display options for different trading styles 📈 Best Practices • Combine with volume analysis for additional confirmation • Use higher timeframe bias to filter trade direction • Consider market structure and support/resistance levels • Backtest different modes to find optimal settings for your strategy ⚠️ Risk Management This indicator identifies potential reversal points but should be used with proper risk management. Always consider: • Overall market trend and structure • Volume confirmation • Multiple timeframe analysis • Appropriate position sizing Perfect for traders who want to catch reversals at institutional levels with high-probability setups. The confluence requirement ensures you're trading with the smart money, not against it.
Pine Script® indicator
by ultimateinvestments7
Price Acceleration Matrix [QuantAlgo]🟢 Overview The Price Acceleration Matrix indicator is an advanced momentum analysis tool that measures the rate of change in price velocity across multiple timeframes simultaneously. It transforms raw price data into velocity measurements for each timeframe, then calculates the acceleration of these velocities to identify when momentum is building or deteriorating. By analyzing acceleration alignment across all three timeframes, the system can distinguish between strong directional moves (all timeframes accelerating in the same direction) and weak, choppy movements (mixed acceleration signals). This multi-timeframe acceleration matrix provides traders with early warning signals for momentum shifts, trend continuation and reversal opportunities across different timeframes and asset classes. 🟢 How It Works The indicator employs a three-stage calculation process that transforms price data into actionable acceleration signals. First, it calculates velocity (rate of price change) for each of the three user-defined timeframes by measuring the percentage change in price over the specified lookback periods. These velocity calculations are normalized by their respective timeframe lengths to ensure fair comparison across different periods. In the second stage, the system calculates acceleration by measuring the change in velocity from one bar to the next for each timeframe, effectively capturing the second derivative of price movement. This acceleration data reveals whether momentum is building (positive acceleration) or deteriorating (negative acceleration) at each timeframe level. The final stage creates the acceleration matrix score by evaluating alignment across all three timeframes. When all timeframes show positive acceleration, the system averages them for maximum bullish signal strength. When all show negative acceleration, it averages them for maximum bearish signal strength. However, when acceleration signals are mixed across timeframes, the system applies a penalty by dividing the average by two, indicating consolidation or conflicting momentum forces. The resulting signal is then smoothed using an Exponential Moving Average and scaled to the -3 to +3 range using a user-defined threshold parameter. 🟢 How to Use 1. Signal Interpretation and Momentum Analysis Positive Territory (Above Zero): Indicates accelerating upward momentum with bullish bias and favorable conditions for long positions Negative Territory (Below Zero): Signals accelerating downward momentum with bearish bias and favorable conditions for short positions Extreme Levels (±2 to ±3): Represent maximum acceleration alignment across all timeframes, indicating high-probability momentum continuation Moderate Levels (±1 to ±2): Suggest building momentum with good timeframe alignment but less conviction than extreme readings Near Zero (-0.5 to +0.5): Indicates mixed signals, consolidation, or momentum exhaustion requiring caution 2. Overbought/Oversold Zone Analysis Above +2 (Overbought Zone): Markets showing extreme bullish acceleration may be due for profit-taking or short-term pullbacks Below -2 (Oversold Zone): Markets showing extreme bearish acceleration may present reversal opportunities or bounce potential Zone Exits: When acceleration retreats from extreme zones, it often signals momentum exhaustion and potential trend changes 🟢 Pro Tips for Trading → Early Momentum Detection: Watch for acceleration crossing above zero after periods of negative readings, as this often precedes major price movements by several bars, providing early entry opportunities before traditional indicators signal. → Momentum Exhaustion Signals: Exit or take profits when acceleration reaches extreme levels (±2.5 or higher) and begins to decline, even if price continues in the same direction, as momentum deterioration typically precedes price reversals. → Acceleration Divergence Strategy: Look for divergences between price highs/lows and acceleration peaks/troughs, as these often signal weakening momentum and potential reversal opportunities before they become apparent on price charts. → Threshold Optimization: Adjust the acceleration threshold based on asset volatility - higher thresholds (0.7-1.0) for volatile assets to reduce false signals, lower thresholds (0.3-0.5) for stable assets to maintain sensitivity. → Alert-Based Trading: Utilize the built-in alert system for bullish/bearish reversals (±2 level crosses) and trend changes (zero line crosses) to capture momentum shifts without constant chart monitoring, especially effective for swing trading approaches. → Risk Management Integration: Reduce position sizes when acceleration readings are weak (below ±1.0) and increase allocation when strong acceleration alignment occurs (above ±2.0), as signal strength correlates directly with probability of successful trades.
Pine Script® indicator
by QuantAlgo
4
Multi Volume Weighted Average Price1. Three independent VWAP configurations (VWAP 1, 2, and 3). Each can be set up separately for periods such as: session, daily, weekly, monthly, etc. 2. Previous VWAP closing prices: Closed VWAPs from previous periods remain visible until the price touches them. At that point, they are removed. 3. Bands: Based on standard deviation or a percentage of VWAP with an adjustable multiplier. The bands can be turned on or off. 4. Source: OHLC4 is the default setting for an accurate approximation, but it is customizable (e.g. HLC3). 5. Global Setting: Select 10,000 or 20,000 historical bars to prevent runtime errors for long periods. Usage tips: 1. Use VWAP 1 for daily sessions, VWAP 2 for weekly, and VWAP 3 for Monthly analysis to receive multi-timeframe support. 2. Customize the labels to clearly distinguish them (e.g. D VWAP, W VWAP, M VWAP). 3. If you encounter errors with historical data (e.g. on the M1 chart), minimize the number of historical bars displayed to 10,000.
Pine Script® indicator
by OutbackTrader25
TTW-Day/Session Separator🗓️ Day Separator – Highlight Markers start times and days for Your Chart This script adds automatic vertical lines to visually separate each trading day on your chart. It helps you quickly identify where each day starts and ends — especially useful for intraday and scalping strategies. ✅ Features: Distinct lines for each weekday, month, week, trading session Optional day-of-week labels (toggle on/off) Custom label position (top or bottom of the chart) Works on any timeframe Whether you're tracking market sessions or reviewing daily price action, this tool gives you a clean structure to navigate your charts with more clarity.
Pine Script® indicator
by JP_Tru
Becak I-series: Indicator Floating Panels v.80Becak I-series: Floating Panels v.80th (Indonesia Independence Days) What it does: This indicator creates three floating overlay panels that display MACD, RSI, and Stochastic oscillators directly on your price chart. Unlike traditional separate panes, these panels hover over your chart with customizable positioning and transparency, providing a clean, space-efficient way to monitor multiple technical indicators simultaneously. When to use: When you need to monitor momentum, trend strength, and overbought/oversold conditions without cluttering your workspace Perfect for traders who want quick visual access to multiple oscillators while maintaining focus on price action Ideal for any timeframe and asset class (stocks, crypto, forex, commodities) How it works: The script calculates standard MACD (12,26,9), RSI (14), and Stochastic (14,3,3) values, then renders them as floating panels with: MACD Panel: Shows MACD line (blue), Signal line (orange), and histogram (green/red bars) RSI Panel: Displays RSI line (purple) with overbought (70) and oversold (30) reference levels Stochastic Panel: Shows %K (blue) and %D (orange) lines with optional buy/sell signals and highlighted overbought/oversold zones Customization options: Position: Choose Top, Bottom, or Auto-Center placement Size: Adjust panel height (15-35% of chart) and spacing between panels Positioning: Fine-tune vertical center offset and horizontal positioning Appearance: Toggle panel backgrounds and adjust transparency (50-95%) Parameters: Modify all indicator lengths and overbought/oversold levels Signals: Enable/disable Stochastic crossover signals Display: Control lookback period (30-100 bars) and right margin spacing Universal compatibility: Works seamlessly across all asset types with automatic range detection and scaling. DIRGAHAYU HARI KEMERDEKAAN KE 80 - INDONESIA ... MERDEKA!!!!!
Pine Script® indicator
by kromut76
4
ZoneX MTFZoneX MTF is an advanced trading indicator built on institutional order flow and demand–supply theory. It automatically detects and highlights persistent demand and supply zones across multiple higher timeframes (D, W, M, 3M, 6M, 12M), giving traders a broader institutional perspective. With full customization options, ZoneX MTF allows users to adjust zone sensitivity, colors, and settings to fit their strategies. Its top-down analysis approach provides a clear picture of where price is coming from, current trend strength, and the most suitable action at the active timeframe. In addition, ZoneX MTF identifies precise institutional buying and selling points, offering retail traders a valuable edge by improving timing and increasing the probability of successful trades.
Pine Script® indicator
by yashraaj221
1
ZoneXZoneX is a powerful trading indicator built on institutional order flow, demand–supply theory, and advanced trend analysis. It automatically detects and highlights demand and supply zones across any timeframe, giving traders a clear view of where institutional buying and selling may occur. With full customization options, users can adjust the zones and settings to match their strategy. ZoneX also includes a 3-EMA combination system and advanced trend analysis tools, helping traders align with market momentum. Beyond zone detection, ZoneX pinpoints potential institutional entry and exit points, offering retail traders a valuable edge by improving trade timing and increasing the probability of success.
Pine Script® indicator
by yashraaj221
Valdes Trading Bots - Scaled Profits and DCA — V 12.1Valdes Trading Bots – Scaled Profits and DCA — V 12.1 Overview This strategy is built for traders who want to capture medium-term swings without getting caught in short-term noise. It is optimized for the 12-hour timeframe, where signals have historically shown stronger consistency across a wide range of market conditions. Key Features Trend regime detection – Identifies when momentum flips from bullish to bearish (and vice versa). Scaled profit targets – Positions automatically reduce across multiple take-profit levels to secure gains progressively. Risk management – Includes a capped, rules-based averaging (DCA) method during controlled pullbacks. Not martingale, strictly limited. Directional flexibility – Can operate long or short, depending on market regime. JSON output included – Adds flexibility for advanced users. How to Use Apply primarily on the 12-hour chart for best results. Use this script for backtesting, research, and simulation before any live application. No input changes are required; it is designed to run as-is. Notes & Limitations This is a strategy script, not a signal service. Past win rates or backtest results are not predictive of future performance. All markets carry risk, and losing trades will occur. Always test extensively in paper trading before deploying to a live account. Disclaimer This script is provided for educational and research purposes only. It is not financial advice. The authors and publishers assume no responsibility for losses incurred from using this strategy.
Pine Script® strategy
by ValdesTradingBots