FVG SMC Real Combat ProOverview
FVG SMC Real Combat Pro is a professional-grade trading indicator specifically optimized for high-volatility assets like Gold (XAU) and Silver (XAG). By integrating Fair Value Gaps (FVG) with Smart Money Concepts (SMC) and Multi-Timeframe (MTF) Trend Filtering, this tool identifies high-probability institutional order flow zones.
Key Capabilities
Asset-Specific Logic: Pre-configured EMA and ATR filters tailored for the unique volatility of Silver and Gold.
MTF Trend Alignment: Automatically syncs with the 1H timeframe to ensure your entries are always aligned with the higher-timeframe narrative.
Dynamic Zone Management: Draws FVG boxes in real-time. Zones that are mitigated or breached are automatically marked as "INVALID" to keep your charts clutter-free.
Professional Dashboard: A sleek, real-time UI provides:
Current Bias: Bullish, Bearish, or Neutral.
Entry Points: Aggressive (Edge) and Conservative (Consequent Encroachment/Midpoint).
Smart SL/TP: Automated risk-reward calculations based on ATR and swing structures.
How to Use
Check the Bias: Look for the "🚀 BULLISH" or "📉 BEARISH" status on the dashboard.
Monitor the Zone: Wait for the price to retrace into the highlighted FVG box (Status: "🔥 IN ZONE").
Execute: Utilize the provided CE (50% Midpoint) for optimized entries and follow the Stop Loss levels for disciplined risk management.
核心概述
FVG SMC Real Combat Pro 是一款專為黃金 (XAU) 與 白銀 (XAG) 等高波動資產設計的專業級指標。本工具結合了價格行為中的合理價值缺口 (FVG) 與 聰明錢概念 (SMC)，並導入多時框 (MTF) 趨勢過濾，旨在捕捉機構級別的訂單流區間。
核心功能
商品專屬邏輯： 針對金、銀不同的波動率，內建優化過的 EMA 趨勢長度與 ATR 缺口判定參數。
MTF 趨勢對齊： 自動串接 1 小時圖表趨勢，確保您的操作始終與大週期方向一致。
動態區間管理： 即時繪製 FVG 區間。當區間被突破或回測完成時，系統會自動標註為「失效」，保持圖表簡潔清晰。
專業數據面板： 提供直觀的實時 UI：
Bias (建議方向)： 顯示看多、看空或觀望。
精準點位： 提供激進進場位與保守進場位 (CE/中軸)。
智慧止損盈： 基於 ATR 與波動結構自動計算科學的止損與目標價 (TP1/TP2)。
操作指南
確認方向： 觀察面板中的方向標籤（🚀 看多 / 📉 看空）。
等待回測： 等待價格回調至 FVG 區間（面板狀態顯示「🔥 區間內」）。
執行計畫： 參考面板給出的 CE (中軸) 或 Entry (邊緣) 進行操作，並嚴格執行建議的 Stop Loss 點位。
重要聲明 (Disclaimer)
Non-Repainting: This indicator does NOT repaint. All signals are calculated based on closed candles. (本指標絕不重繪，所有訊號基於收盤價計算。)
Risk Warning: Past performance is not indicative of future results. Trading involves significant risk. (過去績效不代表未來獲利，交易存在風險。)
Indicators and strategies
ICT Internal Levels [Amaan] 🔷 OVERVIEW
The ICT Internal Levels is a comprehensive institutional analysis suite designed to bridge the gap between subjective price action and objective algorithmic logic. This script automates the detection of core ICT pillars—Liquidity, Time, and Displacement—into a single, high-performance interface.
🧠 The Core Engine
Unlike standard support/resistance indicators, this script uses a dynamic state-tracking system to identify institutional interest zones. It manages historical levels using memory-efficient User-Defined Types (UDTs) and arrays, ensuring that only the most relevant "unswept" liquidity remains on your chart.
🛠 Key Features
• Auto IFVG Checklist: A real-time confluence engine that "grades" market conditions from C to A+ by cross-verifying Liquidity Sweeps, Midnight Open Bias, and HTF Delivery.
• SMT Divergence Engine: A dual-mode detector (Adjacent & Structural) that identifies cracks in correlation between correlated assets (e.g., NQ/ES) with built-in dynamic invalidation.
• Algorithmic Macros: Six fully customizable time-anchored sessions (New York local time) that highlight the specific "killzones" where institutional volatility is highest.
• Internal Liquidity Scanner: A multi-timeframe scanner for Equal Highs (EQH) and Equal Lows (EQL) that identifies the "Draw on Liquidity" across 1m to 15m charts.
• Institutional Bias Framework: Automatically anchors the Midnight Opening Price to determine Daily Equilibrium (Discount vs. Premium arrays).
📈 Why Use This Script?
This tool is built for the "Smarter Trader." It removes the guesswork from ICT concepts by providing:
1. Objectivity: Know exactly when a setup has enough confluence via the automated Checklist.
2. Clarity: Clear visual distinction between Major and Minor liquidity levels.
3. Risk Management: Automated "Breakeven" logic prompts you when the stop-run phase is likely complete.
📝 Technical Implementation
This version is optimized for speed and accuracy. It features zero repainting on the checklist and SMT components by utilizing closed-candle verification. The UI is fully customizable, allowing you to tailor the dashboard to your specific trading style.
🟢 Advanced BSL & SSL Liquidity Engine
The core of this script is a sophisticated tracking system for Buyside Liquidity (BSL) and Sellside Liquidity (SSL). In institutional trading (ICT), these aren't just highs and lows; they are "Liquidity Pools" where retail stop-losses (buy/sell stops) are clustered, acting as magnets for the market algorithm.
1. The Logic of "Parent Swings"
Unlike basic indicators that mark every fractal high/low, this script uses a Swing Strength filter. It only identifies levels after they have been confirmed by a specific number of bars on either side (lookback/lookforward). This ensures the levels represent significant structural points where true "Smart Money" liquidity resides.
2. Major vs. Minor Classification (The Volatility Filter)
The script includes an intelligent classification system based on the Major Level Threshold %:
• The Calculation: Once a pivot is formed, the script measures the displacement away from that level.
• The Depth: If price expands by more than \bm{X\%} (e.g., 0.5%) after forming a high, it is labeled a "Major BSL".
This tells the trader that this level protected a significant move, making the liquidity sitting above it even more valuable to the algorithm.
3. Proximity Logic: Relatively Equal Highs/Lows (REQH/REQL)
The script features an internal "Proximity Scan." It automatically evaluates the distance between active liquidity levels:
• Logic: If two BSL levels are within a defined price threshold (\bm{REQ\_THRESHOLD}), the script identifies them as Relatively Equal Highs.
• Trading Insight: In ICT concepts, equal highs/lows are "engineered liquidity." The market is much more likely to run through these levels aggressively because there is a double layer of stops resting there.
4. Automated Level Management & Mitigation
To prevent "chart clutter," the script uses Custom Types and Arrays to manage levels dynamically:
• Mitigation (The Purge): As soon as price trades through a level, it is considered "mitigated" or "purged."
• Traded-Through Memory: You can toggle a setting to keep these levels visible. If enabled, the script stops extending the line and reduces its opacity (e.g., to 25%), leaving a "ghost level" on the chart. These often act as S/R Flips or support/resistance zones in future sessions.
📝 Logic behind it
• Methodology: The script utilizes the method keyword in Pine Script v6 to create clean, object-oriented code for level deletion and updates.
• Performance: By using array.unshift() and array.remove(), the script maintains a FIFO (First-In-First-Out) queue. This ensures that even on high-volatility days, the script never exceeds the 500-line drawing limit, maintaining smooth chart performance.
• Coordinate Precision: Lines are pinned using bar_index , ensuring that the line starts at the exact wick peak, providing pixel-perfect accuracy for liquidity analysis.
🟢 Institutional Macro Sessions
In the ICT methodology, Time is the primary filter. Price levels only become significant when they are reached at specific times of the day. This script automates the detection of Algorithmic Macros—tight 20-to-30-minute windows where the "Interbank Price Delivery Algorithm" (IPDA) is programmed to execute specific volatility injections.
1. Algorithmic Directives
During these highlighted windows, the market is not moving randomly. The algorithm is usually "called" to perform one of three tasks:
• Liquidity Purge: A quick run to stop out retail traders at a previous High (BSL) or Low (SSL).
• Rebalancing: Returning to a Fair Value Gap (FVG) or "Imbalance" to seek equilibrium.
• Expansion: Moving rapidly from an internal range toward a higher-timeframe target.
2. The 6 Tracked Macros
Your script identifies the most vital institutional windows for the New York session:
• AM Macro 1 (08:50 – 09:10): Often used for "Setting the Stage" or manipulation before the Equities Open.
• AM Macro 2 (09:50 – 10:10): A high-probability execution window often coinciding with the "Silver Bullet" setup.
• AM Macro 3 (10:50 – 11:10): Frequently marks the "Trend Continuation" or the start of a midday reversal.
• Lunch Macro (11:50 – 12:10): Algorithmic rebalancing before the PM session.
• PM Macro (13:10 – 13:40): The kick-off for the afternoon trend and London Close volatility.
• Last Hour Macro (15:15 – 15:45): The final algorithmic rebalancing before the New York "MOC" (Market On Close) orders.
3. Behind the Logic: Timezone Synchronization
A major technical challenge in Pine Script is ensuring time-boxes align correctly regardless of the user's local clock
• The Solution: This script utilizes a Timezone Shift parameter combined with the timestamp() function.
• Logic: It anchors the calculation to the chart’s syminfo.timezone and then offsets it to match New York Local Time.
This ensures that even if you are trading from London, Tokyo, or Dubai, the "09:50 Macro" will always plot exactly when the New York algorithms become active.
🟢 Multi-Timeframe Liquidity Scanner (EQH/EQL)
One of the most powerful features of V2 is the Stable Deep Scan Logic. Unlike basic fractal indicators, this script doesn't just mark any two similar peaks; it performs a rigorous historical audit of the price action.
The "Unswept" Logic
The table is powered by a custom function, check_liquidity_deep(), which executes a two-stage verification:
1. Detection: It scans a lookback window (default 300 bars) to find price points that are mathematically equal.
2. Verification: Once a level is found, the script runs a secondary loop to ensure that no intervening candle has breached (swept) that level. If a higher high has occurred between the level formation and the current bar, the level is discarded as "invalid/purged."
Data Visualization
The scanner requests this deep-scan data via request.security() for the 1m, 2m, 3m, 4m, 5m, and 15m timeframes simultaneously.
• EQH (Green/Red): Indicates a "Ceiling" of liquidity waiting to be raided.
• EQL (Red/Green): Indicates a "Floor" of sell-side liquidity.
• Both: Alerts the trader to a "bracketed" market, often preceding a high-volatility expansion.
• Memory Management: By using var array structures for SMT lines and labels, the script avoids the "Maximum Objects" limit often hit by lower-quality scripts.
• Optimization: The check_liquidity_deep function is designed to only trigger its heaviest calculations on the barstate.islast, ensuring your chart remains fluid and responsive even with multiple timeframes active.
• Coordinate Precision: The script uses xloc.bar_time for Macro lines to ensure they remain pinned to the correct NYC time regardless of the user's local computer clock or daylight savings shifts.
🟢 The Auto IFVG Checklist
The Auto IFVG Checklist in this script is a real-time confluence engine. It doesn't just display labels; it executes complex multi-timeframe scans and state-checks to verify if an institutional setup is currently active.
1. 🛡️ Liq Sweep (Liquidity Sweep)
Code Logic: high > high and close < high (for Bearish) or low < low and close > low (for Bullish).
• How it works: Your code identifies "Wick Manipulations." It flags a sweep when price breaches a previous candle's extremity but fails to hold that level on the close.
• Persistence: It uses swept_p with a ta.barssince lookback of 5 bars, meaning the "fuel" from the sweep remains valid for 5 candles after it occurs.
2. ⚡ Momentum (Midnight Open Bias)Orderflow Code Logic: midnightOpen = na anchored at hour == 0 and minute == 0.
• How it works: The script establishes a "True Day Open."
• IOF Bullish: Price is currently below Midnight Open (accumulating in a discount).
• IOF Bearish: Price is currently above Midnight Open (distributing in a premium).
• The Checklist Role: The Momentum check confirms if you are trading on the correct side of the "Power of 3" (Accumulation/Manipulation/Distribution).
3. 🎯 Clear DOL (Draw on Liquidity)
Code Logic: iof_bullish ? close < ta.vwap : close > ta.vwap.
• How it works: It uses VWAP (Volume Weighted Average Price) as the standard for algorithmic equilibrium.
• The Objective: If the bias is bullish, the script looks for price to be below VWAP, indicating the "Draw" is toward a higher premium or internal liquidity pool. It ensures the trade has room to "breathe" before hitting equilibrium.
4. 🔄 HTF iFVG (Higher Timeframe Inversion FVG)
Code Logic: f_scan_tf(tf) using request.security.
• How it works: This is the most complex part of the indicator. It scans the 1m, 2m, 3m, 4m, and 5m timeframes for "Inversion."
• The "Inversion" Event: It checks if price has closed completely through a Fair Value Gap (inv_b or inv_s). In your script, if a gap on any of these five timeframes is inverted, it signals a high-probability "Change in State of Delivery."
5. 🚢 HTF Delivery (Higher Timeframe Narrative)
Code Logic: f_scan_tf scanning 15m, 30m, 1H, and 4H.
• How it works: The script checks if price is currently interacting with an institutional zone on much higher timeframes.
• Priority: It uses a hierarchical "if-else" chain. If a 4H zone is found, it overrides the 1H; if a 1H is found, it overrides the 15m. This ensures the Checklist always displays the most significant timeframe currently "delivering" price.
6. ⚖️ Breakeven (The Risk-Off Trigger)
Code Logic: beR = ta.barssince(swept) < 10.
• How it works: This is a time-based risk management filter.
• The Logic: If a Liquidity Sweep occurred within the last 10 bars and the trade is moving, the script flags "Breakeven." It alerts the trader that the "Stop Run" phase should be over, and it is time to move the stop loss to the entry to ensure a risk-free trade.
📊 The Mathematical Rating System
The final "RATING" cell in the table is the result of a weighted boolean check:
• A+: Requires all 5 confluences (Sweep, Momentum, iFVG, Delivery, and DOL).
• A: Requires Sweep, Momentum, iFVG, and DOL.
• B+: Only requires the intraday pillars (Sweep, Momentum, and iFVG).
• C: Only requires an iFVG presence.
🟢 SMT Divergence Engine
The SMT engine in this script acts as a "crack in correlation" detector. It monitors the relationship between current chart and a Comparison Symbol (e.g., NQ vs. ES) to identify institutional accumulation or distribution that isn't visible on a single chart.
1. Dual-Mode Detection
This feature implements two distinct types of SMT to capture both aggressive and structural shifts:
• Adjacent Wick SMT: This is "Micro-SMT." It compares the current candle's wick to the previous candle's wick. If the main symbol makes a Higher High but the correlated symbol does not, it flags an immediate divergence.
• Structural Pivot SMT: This is "Macro-SMT." It uses three different lookback lengths (Primary, Secondary, and Tertiary) to find divergences across major market swings.
2. Dynamic Invalidation Logic (The "Mended Crack")
A common issue with SMT indicators is that they stay on the chart forever. Your code solves this with a Reference Price Check:
• The Logic: When a divergence is found, the script stores the correlated symbol’s high/low in an array (adj_up_comp_refs).
• The Invalidation: If the correlated symbol eventually "catches up" and breaks that stored reference price, the "crack" is considered mended. The script then executes a while loop to purge the lines and labels from the chart automatically.
3. Advanced Memory Management (Array-Based)
This allows the script to track multiple concurrent SMTs. If three different divergences happen in a row, the script can display and manage all of them independently without hitting TradingView's drawing limits or "forgetting" old levels.
4. Triple-Length Pivot Analysis
By using three different pivot lengths (3, 5, and 8), the SMT engine filters "Market Noise":
• Tertiary (3): For scalpers looking for quick entries.
• Primary (5): For standard intraday trend changes.
• Secondary (8): For major structural shifts and daily bias reversals.
5. Algorithmic Correlation Mapping
The script uses fixnan(ta.pivothigh(...)) to ensure that the SMT lines are pinned exactly to the historical pivots, even if the comparison symbol has gaps in its data. This ensures that the "slope" of the SMT line is mathematically accurate, providing a clear visual of the divergence.
⚒️How to use ICT Internal Levels
Step 1: Establish the "Daily Anchor" (Midnight Open)
Before looking for trades, identify your bias using the Midnight Opening Price.
• Look at the Momentum section of your Checklist.
• If the script says "BULL" (price is below Midnight Open), you are in a Discount and should only look for Longs.
• If it says "BEAR" (price is above Midnight Open), you are in a Premium and should only look for Shorts.
Step 2: Identify the "Draw" (EQH/EQL & BSL/SSL)
Now, find out where the market is likely to go.
• The Scanner: Check the Multi-TF EQH/EQL Table. If you see "EQH" across multiple timeframes (1m, 5m, 15m), that is a high-probability Draw on Liquidity (DOL).
• The Levels: Look for the Major BSL/SSL lines. These are your "Targets." The market will likely seek these pools of money before reversing.
Step 3: Wait for the "Time Window" (Macros)
Don't trade in the "dead zones." Wait for price to enter a Macro Session (the highlighted vertical zones).
• Institutional volatility is most consistent during these windows (e.g., 09:50–10:10 AM).
• The Goal: You want to see price reach your "Draw" (from Step 2) during this time window.
Step 4: Confirm the "Crack" (SMT Divergence)
As price approaches a BSL or SSL level within a Macro window, look for an SMT label.
• If the asset you are trading (e.g., NQ) sweeps a high, but the comparison symbol (e.g., ES) does not, the SMT engine will plot a line.
• This confirms that "Smart Money" is actively distributing, and a reversal is imminent.
Step 5: The "Entry Signal" (HTF iFVG)
Wait for the Change in State of Delivery.
• Look for an iFVG (Inversion Fair Value Gap) to form on the 1m or 5m chart.
• When price closes through a gap, the HTF IFVG item on your Checklist will turn green. This is your "Green Light" to enter the market.
Step 6: Final Audit (The Checklist Grade)
Before clicking "Buy" or "Sell," look at the RATING in the bottom corner of the checklist.
• A+ / A: Execute with full confidence. All pillars (Time, Price, SMT, and HTF) are aligned.
• B+: High probability, but perhaps you are trading outside of a Macro or against the HTF Delivery. Use smaller risk.
• C: Avoid this setup; it is likely a trap or a low-probability scalp.
Step 7: Risk Management (Breakeven)
Once you are in the trade:
• Monitor the Breakeven status on the checklist.
• Once it switches to "YES" (usually after 10 bars or a significant move), move your Stop Loss to your entry price. You now have a "Risk-Free" trade.
⚠️ Risk Disclaimer
The ICT Internal Levels V2 is an educational tool for market analysis and does not provide financial advice or guaranteed "buy/sell" signals. Trading involves significant risk, and you may lose some or all of your invested capital.
No Guarantees: Past performance does not guarantee future results. While this script uses advanced logic to identify confluences, all market analysis involves probability, not certainty.
User Responsibility: The author is not liable for any financial losses resulting from the use of this indicator. You are solely responsible for your trading decisions and should always use proper risk management. Use this script to supplement your own manual analysis—never rely on an indicator alone for execution.
USA SR Momentum Official Invite-OnlyUSA SR Momentum — Invite-Only (Integrity Edition)
Contact : gm2hoops@gmail.com
Purpose
Sector rotation + market alignment dashboard using normalized Heat (-100..100) with higher timeframe confirmation, confluence scoring, optional whale markers, and an MTF matrix.
Documentation (PDF)
Quick Start:
raw.githubusercontent.com
User Guide:
raw.githubusercontent.com
Support: Send screenshot + BUILD ID shown on the dashboard. gm2hoops@gmail.com
Access is tied to your TradingView username & email address.
Disclaimer
Informational/educational only. Not financial advice. No guarantees. You are responsible for all decisions and risk management.
GTC AI IndicatorGabriel Trading Club AI Indicator is an exclusive scalping indicator developed specifically for the M1 timeframe, designed to help traders identify high-precision entry zones through the analysis of validated and confirmed historical price structure.
Unlike conventional indicators that rely on lagging signals or generic mathematical formulas, this indicator does not use any supporting indicators. Its entire analytical framework is built purely on price action and smart money reaction zones around critical price levels—areas where significant market decisions are truly made.
This approach allows traders to execute with greater accuracy, align more closely with real market intent, and maintain a disciplined, structure-based scalping strategy.
Auto Decision Box LITEAuto Decision Box LITE
Simple educational indicator that visualizes consolidation "decision boxes" on a higher timeframe after impulse moves.
Features:
- Draws orange high/low box lines with fill based on ATR impulse and balance bars
- Optional RTH session filter (9–11 AM ET by default)
- Basic crossover/crossunder labels when price breaks the box (green up / red down)
- Daily disclaimer label
This is a structure-only tool — no signals, no filters, no trading logic. Use it to manually identify potential zones on stocks, futures, forex, etc.
For educational purposes only. Not financial advice. Always do your own research and manage risk.
3 RULESCreated 3 Unique Inputs: Instead of just one custom_txt variable, I created custom_txt1, custom_txt2, and custom_txt3.
Organized Settings: I grouped the settings in the menu (Position, Line 1, Line 2, Line 3) so it's easier to find the box you want to type in.
Updated Logic:
If you select "Custom Text" for Line 1, it reads the "Line 1 Custom Text" box.
If you select "Custom Text" for Line 2, it reads the "Line 2 Custom Text" box, etc.
How to use it:
Paste the code into the Pine Editor at the bottom of TradingView.
Click Add to Chart.
Open the Settings (Gear Icon) of the indicator.
Set Line 1, Line 2, and Line 3 all to "Custom Text".
Type whatever you want in the 3 separate text boxes.
SolQuant PVSRA VolumeOverview
SolQuant PVSRA Volume is an advanced volume profile overlay based on the Price, Volume, Support, and Resistance Analysis (PVSRA) methodology. It identifies institutional activity by detecting "Vector Candles"—significant price moves supported by abnormal volume spikes—helping traders distinguish between retail noise and market maker accumulation or distribution.
Key Features
Institutional Volume Tiers: Categorizes volume into three distinct "Vector" situations based on the 10-period moving average:
- Extreme Volume (500%+): Highlights massive participation, often signaling institutional climaxes.
- Peak Volume (200%+): Identifies significant spikes and high-spread candles.
- Rising Volume (150%+): Marks moderate above-average activity.
PVSRA Color Coding: Intelligently colors candles and volume bars to reflect momentum:
- Bullish high-volume is marked in blue or yellow for extremes.
- Bearish high-volume is marked in blue-violet or yellow for extremes.
Instrument Override Settings: Includes a specialized toggle to automatically source volume data from equivalent Binance Perpetual charts, ensuring accurate crypto volume analysis even on spot charts.
Integrated Volume MA: Features an optional 10-period volume moving average to help visualize current volume relative to recent historical norms.
Comprehensive Alert System: Includes pre-configured alerts for any vector candle or specific volume tier (500%, 200%, or 150%) to ensure you never miss institutional entry points.
How it Works
The script calculates the average volume of the previous 10 chart bars as its benchmark. It then analyzes the current candle's volume and price spread to determine if it meets "Vector" criteria. These situations—Climax, Peak, or Rising—are then visualized through a high-contrast color model, making it easy to spot where market makers are potentially trapping liquidity or initiating trends.
Disclaimer
This indicator is for educational and analytical purposes only. Volume analysis represents historical participation and does not guarantee future market moves.
SolQuant Synthetic Max PainOverview
SolQuant Synthetic Max Pain is a professional-grade analytical tool that identifies institutional support and resistance zones through modeled Open Interest (OI) distributions. By pinpointing "Maximum Pain" levels—where the highest concentration of leveraged positions would face theoretical liquidation—this indicator helps traders anticipate high-probability reversal zones and market maker price targets.
Key Features
Multi-Timeframe Anchor Logic: Simultaneously tracks and displays Max Pain levels for Hourly, 4-Hour, Daily, and Weekly anchors, providing critical context for both day and swing traders.
Permanent Historical Tracking: Unlike the Lite version, this version maintains permanent historical lines, allowing you to backtest exactly how price has reacted to Max Pain zones in the past.
Synthetic OI Distribution Model: Uses a Gaussian modeling approach to simulate market positioning, with adjustable Put/Call biases to account for directional market skew.
Dynamic Strike Management: Employs an "Auto Strike Increment" that scales with price volatility (~1% of price), ensuring levels remain accurate across all asset classes and market regimes.
Integrated Info Dashboard: A real-time table provides an immediate glance at current anchor prices and their corresponding Max Pain targets across all enabled timeframes.
How it Works
The script generates a synthetic strike ladder centered on each timeframe's open (the anchor). It identifies where "Maximum Pain" is concentrated by weighting strikes away from that anchor price. MP Long (Support) represents the peak theoretical Put OI, while MP Short (Resistance) marks the peak Call OI. These levels act as liquidity magnets where market participants are most exposed.
Comparison: Full vs. Lite Version
While the Lite version offers essential intraday support, this Full Version is designed for deeper analysis:
Macro Context: Adds 4-Hour and Weekly anchors, whereas Lite is restricted to Hourly and Daily.
Historical Insight: Provides permanent historical lines for strategy backtesting, a feature absent in the Lite version.
Advanced Visibility: Includes expanded labeling and max_lines support for a more detailed chart overview.
Disclaimer
This indicator is for educational and analytical purposes only. It uses mathematical modeling for synthetic levels and does not represent actual exchange order books or guaranteed price targets.
SolQuant Synthetic Max Pain LiteOverview
SolQuant Synthetic Max Pain Lite is an analytical tool designed to model and visualize critical support and resistance levels based on synthetic Open Interest (OI) distributions. By calculating the "Maximum Pain" points for leveraged positions, it identifies price levels where the greatest number of option-style contracts (Longs and Shorts) would face theoretical maximum losses.
Key Features
Synthetic Max Pain Modeling: Uses a Gaussian OI distribution model to estimate strikes where leveraged traders are most exposed.
Dual Anchor Timeframes: Automatically anchors calculations to the Hourly and Daily opens to provide both short-term and intraday support/resistance zones.
Market Skew Bias: Includes adjustable Put and Call bias settings to account for bullish or bearish market sentiment, shifting the Max Pain levels accordingly.
Automated Strike Selection: Features an "Auto Strike Increment" mode that dynamically adjusts strike distances based on current price volatility (~1% of price).
Real-Time Visualization: Displays bold, color-coded lines and labels for MP Long (Support) and MP Short (Resistance) with an optional midline for average value tracking.
On-Chart Info Table: A customizable dashboard provides a quick reference to current anchor prices and their associated Max Pain levels.
How it Works
The script generates a synthetic strike ladder centered on a specific timeframe's anchor price. It applies an OI distribution model—weighting strikes further from the anchor—to simulate realistic market positioning. The "Max Pain" levels are then derived from the strikes containing the highest theoretical OI concentrations: MP Long (Support) is the peak put OI below the anchor, while MP Short (Resistance) is the peak call OI above it.
Lite vs. Full Version
This Lite version focuses on essential intraday levels. For professional traders requiring higher-timeframe context, the full SolQuant Synthetic Max Pain indicator includes:
4-Hour & Weekly Anchors: Additional anchors for swing trading and macro analysis.
Historical Tracking: Permanent historical lines to analyze past reactions at Max Pain zones.
Advanced Distribution Control: Granular control over OI modeling parameters.
Disclaimer
This indicator is for educational and analytical purposes only. It uses mathematical modeling for synthetic levels and does not represent actual exchange order books or guaranteed price targets.
SolQuant HeikenAshi Trend MTFOverview
SolQuant HeikenAshi Trend MTF is a professional-grade momentum tracking tool that utilizes double-smoothed Heikin-Ashi logic to define trend direction across multiple timeframes simultaneously. By filtering out market noise through Exponential Moving Average (EMA) smoothing, it provides a stabilized view of the trend on your current chart, 15-minute, and 1-hour intervals.
Key Features
Multi-Timeframe Overlays: Simultaneously tracks and displays trend clouds for the current timeframe, 15-minute, and 1-hour intervals for higher-context trading.
Double Smoothing Logic: Employs an initial EMA smoothing of raw price data followed by a second layer of smoothing on the Heikin-Ashi values to eliminate "whipsaws."
Dynamic Trend Clouds: Visualizes momentum through multi-layered fills that distinguish between the core candle body and the volatility range (wicks).
MTF Transparency Control: Fully customizable transparency settings allow you to overlay higher-timeframe trends without obstructing the primary price action.
Noise Filtering: Designed to maintain a stable color until a significant directional shift occurs, helping traders stay in trends longer.
How it Works
The script calculates the standard Heikin-Ashi formula using EMA-smoothed inputs for open, high, low, and close. For the MTF features, it utilizes the security function to request these smoothed values from higher timeframes (15m and 1h). These external values undergo an additional smoothing process before being plotted as customizable trend clouds or optional candles.
MTF vs. Lite Version
While the Lite version is restricted to single-timeframe analysis, this MTF version provides:
Integrated 15-minute and 1-hour trend overlays.
Customizable smoothing for each individual timeframe.
Multi-timeframe cloud fills for visual trend alignment.
Disclaimer
This indicator is for educational and analytical purposes only. Smoothed indicators may have inherent lag relative to raw price action and should be used as part of a comprehensive trading plan.
Delta Moving Average [RichKeys Lab]Delta Moving Average – Volume Confirmation & Divergence Engine
The Delta Moving Average is a specialized momentum tool built to reveal the hidden relationship between volume delta and price action. Instead of simply tracking direction, this indicator exposes whether buyers or sellers are truly in control beneath the surface — even when price appears quiet.
At its core, the Delta MA smooths the raw volume delta to show whether buying or selling pressure is increasing or fading. But the real power comes from its enhanced intelligence:
✔ Trend‑Shift Coloring
The moving average dynamically changes color when momentum flips from rising to falling or vice‑versa, giving you instant visual confirmation of trend transitions.
✔ Divergence Detection (Accumulation & Absorption Signals)
The indicator identifies moments when volume delta disagrees with price, highlighting two of the most important market behaviors:
• Selling absorption at resistance
Negative delta appears, but price refuses to fall — a sign that sellers are being absorbed.
• Buying accumulation at support
Positive delta appears, but price refuses to rise — a sign that buyers are quietly accumulating.
These divergence markers often precede powerful reversals or breakout continuations.
✔ Strong Trend Background Shading
When the Delta MA accelerates with unusual strength, the background highlights the move, helping you instantly recognize high‑pressure trend phases.
✔ Smart Reversal Alerts
Built‑in alerts notify you the moment the Delta MA flips direction, allowing you to react quickly to shifts in underlying order flow.
Why Traders Use It
This indicator is designed for traders who want to understand whether volume is confirming or contradicting price. It helps you:
• Spot early reversal pressure
• Confirm breakout strength
• Identify hidden accumulation or distribution
• Filter out weak moves with no real volume behind them
• Time entries with greater confidence
Whether you trade intraday or swing, the Delta Moving Average gives you a clearer read on the true buying and selling pressure driving the market.
SolQuant HeikenAshi Trend LiteOverview
SolQuant HeikenAshi Trend Lite is a specialized trend identification tool that utilizes double-smoothed Heikin-Ashi calculations to define market direction. By applying Exponential Moving Averages (EMA) to Heikin-Ashi values, the indicator filters out market noise and provides a clean, visual representation of trend strength through dynamic cloud fills.
Key Features
Double Smoothing Logic: Combines initial EMA smoothing of raw price data with a second layer of smoothing on the Heikin-Ashi outputs for a highly responsive yet stable trend line.
Visual Trend Cloud: Features a multi-layered fill system that distinguishes between the candle "body" (momentum) and "wicks" (volatility range) for immediate trend recognition.
Noise Reduction: Designed to prevent "whipsaws" by calculating a smoothed open and close, ensuring color changes only occur during meaningful directional shifts.
Customizable Aesthetics: Users can toggle the visibility of smoothed HA candles and adjust smoothing lengths to suit different asset classes and trading styles.
How it Works
The script first calculates EMA-smoothed values for Open, High, Low, and Close. It then derives Heikin-Ashi values from these smoothed inputs and applies a final smoothing length (Len2) to the results. The result is a "Trend Cloud" where bullish momentum is marked by the smoothed Close being above the smoothed Open, and bearish momentum is marked by the opposite.
Lite vs. MTF Version
This Lite version provides essential single-timeframe trend tracking. For traders requiring deeper context, the SolQuant HeikenAshi Trend MTF version offers:
Multi-timeframe trend alignment tracking.
Integrated dashboard for monitoring HA trends across several timeframes simultaneously.
Advanced reversal signals based on MTF convergence.
Disclaimer
This indicator is for educational and analytical purposes only. Smoothed indicators may have inherent lag and should be used in conjunction with other technical analysis tools.
SolQuant Weekly CyclesOverview
SolQuant Weekly Cycles is a strategic analytical tool designed to visualize the recurring phases of the trading week. By identifying specific market maker behaviors—such as liquidity flushes, induction moves, and midweek reversals—this indicator helps traders understand the broader context of weekly price action and institutional participation.
Key Features
Daily Phase Analysis: Visualizes critical weekly stages including the Sunday Dead Gap (liquidity flush), Monday False Move (induction), Tuesday Consolidation (volume trapping), and the Friday Model Completion.
Midweek Reversal Tracking: Highlights the high-probability reversal window spanning Wednesday and Thursday, often characterized by M or W formations and significant turning points.
Institutional Zone Detection: Identifies "Weekend Traps" and "Trapped Traders" zones to mark areas of low-volume manipulation that often occur outside of standard session hours.
Weekly Range Visuals: Plots the full weekly high/low range with optional Fibonacci levels (38.2%, 50%, 61.8%) to gauge mid-week retracements relative to the weekly open.
Interactive Info Table: Provides a real-time summary of the current market phase and recommended actions based on institutional cycle logic.
Reversal Confirmation: Includes an integrated 50 EMA to help confirm reversal triggers after price exits extreme cycle zones.
How it Works
The script maps the weekly cycle based on a user-defined timezone (defaulting to GMT-5). It uses dedicated functions to calculate the range for each trading day and encapsulates them in color-coded boxes. The logic is grounded in identifying institutional "3-level" induction moves that typically culminate in a midweek shift. Phase-specific labels and a bottom-bar dashboard provide immediate clarity on the current state of the weekly model.
Disclaimer
This indicator is for educational and analytical purposes only. Market cycles represent historical tendencies and do not guarantee future results. Please manage your risk accordingly.
Ultras ADX Heat (Strength Gradient)Ultras ADX Heat (Strength Gradient) — Description
Ultras ADX Heat is a lower-pane ADX visualizer that turns raw ADX values into a strength “heat map”.
What it measures
ADX (Average Directional Index) measures trend strength on a 0–100 scale.
ADX does not tell direction (bull/bear) — only how strong the current directional movement is.
How to read the gradient
This indicator colors the ADX area using a gradient:
Red (weak) = low ADX → market is often choppy / range-bound
Blending red → teal = strength building → trend becoming more tradable
Teal (strong) = high ADX → strong trend strength (can also mean you’re late; pullbacks can be sharp)
Key levels
By default the gradient is mapped between:
20 = “trend starting / tradable” zone
40 = “strong trend” zone
You’ll see dotted horizontal lines at these levels to quickly spot when the market shifts from chop → trend.
Best use
Use this as a regime filter:
Favor strategies that trend-follow when ADX is above ~20
Avoid or tighten rules when ADX is below ~20
Inputs
ADX Length / Smoothing: controls the ADX calculation.
Weak → Strong Start / End: defines where the gradient begins (weak) and reaches full strength (strong).
Typical defaults: 20 → 40
Weak/Strong Colors: customize gradient endpoints.
Fill / Outline settings: control how bold the heat map appears.
BlockfinderThis script will help solve the problem of finding buy or sell levels, the calibration parameters are adjusted for intraday trading. If you have any questions, write in private messages, I will help you figure it out and set it up.
SolQuant MarketsOverview
SolQuant Markets is a comprehensive session-tracking tool designed to visualize global trading hours and institutional activity windows. By plotting precise ranges for the New York, London (UK), and Asia sessions, it helps traders identify key liquidity zones and potential institutional manipulation periods.
Key Features
Global Session Tracking: Automatically plots visual range boxes for US (New York), UK (London), and Asia trading sessions.
Institutional Activity Zones: Features "Market Maker Zones" that highlight critical windows such as Asia Gaps, Session Reversals, and Weekend Traps.
Session High/Low Visuals: Dynamic range boxes adjust in real-time to track session extremes, with optional Fibonacci levels (38.2%, 50%, 61.8%) to identify mid-session retracements.
Weekend Analysis: Includes specialized logic to identify Weekend Traps and Trapped Traders zones, helping to spot manipulation that occurs outside of standard market hours.
Customizable Dashboard: Features a clean "Bottom Bar" display to track multiple session overlaps and alignment without cluttering the main price action.
How it Works
The script utilizes GMT-5 as its base timezone to define fixed institutional windows . It calculates the high and low for each specified session and encapsulates them in color-coded boxes. Specialized functions monitor volume and reversal timing to identify "GAP," "DUMP," and "REVERSAL" zones . These zones help traders recognize where institutional participants may be entering the market or trapping retail liquidity.
Disclaimer
This indicator is for educational and analytical purposes only. Market session times and institutional zones are based on historical tendencies and do not guarantee future performance.
Quallamagie Swing Entry Risk vs ATR%This indicator is designed to support Quallamagie-style swing trade entries, where the goal is to enter strong leaders with tight risk, clean structure, and favorable volatility asymmetry.
Rather than timing micro day-trade breakouts, the script helps you evaluate whether a stock’s early-session structure offers an acceptable swing risk relative to its normal daily movement.
What it shows
Opening Range High (ORH): Defined by the first N minutes or bars of RTH
Live Session Low (LOD): Continuously updates and represents the true downside risk
Shaded risk zone: Visualizes the distance between ORH and LOD
Core swing-trade metrics
Absolute risk ($): ORH − LOD
Risk %: (ORH − LOD) ÷ ORH
Risk ÷ ATR% (or ADR%) ratio: Measures how much of a stock’s typical daily range you are risking
Position sizing: Share count based on a fixed max dollar risk
Why this matters for Quallamagie entries
High-quality swing setups typically:
Occur in leading stocks near highs
Form tight early-day structures
Allow entries where risk is a small fraction of daily ATR
A lower Risk ÷ ATR% ratio indicates a cleaner, more efficient swing entry — even if the actual entry occurs later in the day or on a pullback.
This tool helps answer:
Is this a low-risk swing entry relative to how this stock normally moves?
Design philosophy
Uses completed daily ATR/ADR by default (no look-ahead bias)
Risk is defined structurally (price-based), not by indicators
Intended as a filter and risk framing tool, not a signal generator
Best used for
Quallamagie / Minervini-style momentum swing trades
IPO bases and post-earnings leaders
Tight consolidations near highs
Trend vs BalanceThis indicator is built to answer one key question before you trade:
Is the market trending or balancing (ranging)?
And it doesn’t just label it — it also gives you a confidence score (0–100%).
It works with two timeframes:
Daily (D): the “base” timeframe — it drives the decision.
H4 (240): the “adjustment” timeframe — it reinforces or weakens what Daily says.
That’s why the final output is COMBO:
COMBO always follows the Daily regime (Bull Trend, Bear Trend, or Balance).
H4 does NOT change the regime, it only adjusts the confidence % depending on whether it agrees or conflicts.
The % is calculated using a checklist-style scoring system (5 points per regime).
Each regime has 5 measurable conditions, each worth 20 points:
3 out of 5 → 60%
5 out of 5 → 100%
What does the checklist measure (pure candle behavior):
Structure: whether price forms a clear staircase (HH/HL for bull trend or LL/LH for bear trend).
Closes: whether candles close near the extremes (trend) or near the middle (balance).
Overlap: whether price is “choppy” with lots of overlap (balance) or cleanly displaced (trend).
Impulse vs pullback: whether one side clearly dominates (trend) or moves are more symmetric (balance).
Breaks: whether price breaks and stays outside (acceptance = trend) or breaks and quickly re-enters (balance).
How to read it quickly:
COMBO = your main playbook (trend strategy or range strategy).
COMBO % = your confidence level (how clear the context is).
If you see a ⚠️, it means strong conflict between Daily and H4 — a “be careful” day.
In short: Daily tells you the market “weather”, and H4 tells you whether today the wind is helping or fighting you.
BitoAlliance Auto FIBONACCIThis is an indicator that automatically displays Fibonacci segments
and automatically marks the 0.5-0.618 golden ratio range with color blocks.
The shape, color, and size of each segment can be set,
and the previous golden ratio block can be displayed.
USA Sector Rotation Momentum - Integrity Edition [Invite Ready]USA SR Momentum — Invite-Only (Integrity Edition)
Purpose
Sector rotation + market alignment dashboard using normalized Heat (-100..100) with higher timeframe confirmation, confluence scoring, optional whale markers, and an MTF matrix.
Documentation (PDF)
Quick Start:
raw.githubusercontent.com
User Guide:
raw.githubusercontent.com
Support
Send a screenshot and include the BUILD ID shown on the dashboard.
Disclaimer
Informational/educational only. Not financial advice. No guarantees. You are responsible for all decisions and risk management.
Support: Send screenshot + BUILD ID shown on the dashboard.
Access is tied to your TradingView username.
Disclaimer: Informational only, not financial advice.
SolQuant Trend MTFOverview
SolQuant Trend MTF is a comprehensive trend analysis tool that provides deep market context by monitoring price direction across multiple timeframes simultaneously. By combining smoothed moving average (SMMA) logic with specialized candle detection, this indicator helps traders identify high-probability trend alignments and institutional activity zones.
Key Features
Multi-Timeframe Trend Visualization: Monitors the current timeframe alongside 5m, 15m, 1H, and 4H trends using color-coded bands and responsive gradient fills.
Market Maker (MM) Detection: Automatically identifies "Extreme Volume" candles where volume exceeds 500% of the average, highlighting potential institutional manipulation or major participation.
Pressure Zone Identification: Utilizes Keltner Channel analysis to detect candles entering pressure zones, signaling potential overextension or imminent reversals.
Trend Alignment Signals: Visual markers and candle coloring help identify when multiple timeframes align, confirming a strong directional bias.
Customizable Visuals: Includes adjustable fill transparencies, toggleable timeframe displays, and priority-based candle coloring (MM > Pressure > Trend).
How it Works
The indicator calculates SMMA variants for various timeframes using a resolution multiplier to filter market noise. A bullish trend is identified when the smoothed close exceeds the smoothed open; a bearish trend is identified when the opposite occurs. For institutional activity, the script utilizes PVSRA-style logic to flag extreme volume spikes (500%+) with distinct "Market Maker" markers and colors.
Disclaimer
This script is for educational and analytical purposes only. Multi-timeframe analysis can provide significant context, but no indicator can guarantee future market movement.
SolQuant Trend LiteOverview
SolQuant Trend Lite is a high-performance trend detection tool designed to identify the directional bias of the current timeframe using smoothed moving average (SMMA) analysis. This is the lite version of the SolQuant Trend MTF, specifically focused on providing a clean and responsive visualization of single-timeframe momentum.
Key Features
SMMA Trend Logic: Uses a smoothed moving average approach with a resolution multiplier to filter out market noise and define the core trend.
Dynamic Gradient Visualization: Features a responsive gradient fill that expands between the price action and the SMMA bands to visualize trend strength.
Customizable Candle Coloring: Includes an optional toggle to color candles based on the current trend state (Bullish/Bearish) for immediate visual confirmation.
Visual Clarity: Displays trend direction via color-coded bands and fills directly on the chart overlay.
How it Works
The script calculates an SMMA variant based on the open and close of the candles, modified by a user-defined resolution multiplier . When the smoothed close is above the smoothed open, the indicator identifies a bullish trend; conversely, a bearish trend is identified when the smoothed close is below the smoothed open . A dynamic price anchor (EMA of high/low) is used to generate the gradient fills that track the trend's momentum .
SolQuant Trend MTF vs. Lite
While this Lite version provides essential single-timeframe trend detection, the full SolQuant Trend MTF indicator includes:
Multi-timeframe trend analysis for higher-context trading.
Market Maker (MM) candle detection.
Pressure candle identification for spotting potential reversals.
Disclaimer
This script is for educational and analytical purposes only. It does not constitute financial advice.
Edgecraft - Volume SurgeEdgecraft — Volume Surge highlights moments when trading activity meaningfully increases, by flagging candles where volume exceeds a user-defined percentage of the recent average. A sudden rise in volume often signals that participation has changed — more traders are involved, liquidity is improving, and price action may be transitioning from “noise” to “decision.”
⸻
What it does
At its core, this script compares the current candle’s volume to the average volume over a lookback period and triggers when that candle reaches your chosen threshold (example: 150%, 185%, 250%, etc.). When a surge happens, the indicator plots a marker and can also trigger alerts.
⸻
What problem it solves
A breakout, breakdown, or reversal that occurs on weak participation can fail quickly. This tool helps you quickly answer:
• “Is this move attracting real attention?”
• “Is volume expanding in the direction of price?”
Rather than trying to “predict,” it gives you a participation filter to support better decision-making.
⸻
How it helps your decision process
• Helps you start thinking in a top-down way: Price + Participation
• Makes it easier to spot when the market is actually “awake”
• Reduces confusion from random intraday wiggles by focusing on meaningful activity
• Adds a clean confirmation layer to breakouts, breakdowns, ORB moves, trend continuation, and reversals
• Helps identify when liquidity/attention returns after consolidation
• Useful as a “trigger condition” for scanners and alerts without needing heavy overlays
⸻
Key features
• Custom Volume Surge Threshold (%)
Choose exactly what “surge” means to you: 150%, 185%, 250%, etc.
• Volume Average Length
Control how sensitive the baseline is by adjusting the averaging period.
• Direction Filter (Any / Bullish / Bearish)
Only show surges aligned with candle direction if you want cleaner signals.
• RTH Filter (Exchange Time)
Optionally restrict signals to Regular Trading Hours to avoid thin-liquidity noise.
• Minimal chart markers
Diamond markers appear only when the conditions are met. Clean by design.
⸻
Alert system
The script provides two alert conditions:
• Bullish Volume Surge
• Bearish Volume Surge
This makes it easy to create alerts that match your trading bias:
• set separate notification tones,
• route them to different webhooks,
• or use them for different trade plans.
⸻
How to use it
• Breakout confirmation: A breakout with a bullish surge signal suggests stronger participation.
• Breakdown confirmation: A bearish surge signal can help validate downside continuation.
• Reversal check: If price flips but volume doesn’t expand, you may treat the move as lower quality.
• Intraday focus: Enable RTH filtering to prioritize higher-quality market hours.
⸻
Edgecraft tools aim to stay simple, readable, and decision-focused — giving traders clearer context without turning the chart into a dashboard. If you find this useful, give us a like! Look for more releases from Edgecraft Indicators soon.
