Get started

Search in scripts for "30年国债收益率"

CM_Ultimate RSI Multi Time FrameAvailable Options on Inputs Tab!!! RSI with ability to change first RSI to a different Time Frame.(Defaults To Current Chart Time Frame). Ability To Turn On/Off Background Highlighting if First RSI is Above/Below 70 or 30 Lines. Ability To Turn On/Off Background Highlighting When First RSI Crosses Above 30 Or Below 70. Ability To Turn On/Off "B" Or "S" When First RSI Crosses Above 30 Or Below 70. Ability To Turn On/Off Mid -Line Plot. Option To Plot 2nd RSI to show different Time Frames on same chart!!! Ability To Use Different Look Back Period If You Plot 2nd RSI.
Pine Script® indicator
by ChrisMoody
71
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Pine Script® indicator
by ChrisMoody
91
Premarket Power Bar StrategyStep 1: Mark Your Levels Before the Open When: Between 9:00–9:25 AM ET Premarket High – the highest price before 9:30 AM Premarket Low – the lowest price before 9:30 AM
Use extended hours view on your chart platform. These levels act as magnets and turning points once the market opens. They form the foundation for your first trade of the day. Step 2: Let Price Come to the Level Do not chase early price action.
Wait for price to approach either the premarket high or low during regular market hours.
Look for a pause, hesitation, or test near the level. This keeps you from overtrading and forces you to wait for structure to form. Step 3: Watch for the Power Bar A power bar is a large-bodied candle with strong momentum and little to no wick on the opposite side.
It should form directly at the premarket level—not near it, not after a breakout. At the premarket low, a bullish power bar is your buy trigger. At the premarket high, a bearish power bar signals a short opportunity. No power bar? No trade. The level and the candle must come together to create the edge. (BONUS: As you identify specific patterns, eg, double bottoms, double tops, etc. look for those patterns near the premarket high or low) Step 4: Entry, Stop, and Target Entry: For longs: place your order just above the high of the bullish power bar For shorts: enter just below the low of the bearish power bar Stop: Long trade: just under the low of the power bar Short trade: just above the high of the power bar Profit Target Options: VWAP Prior day’s close Key support/resistance levels Keep your trade logic mechanical and consistent. Execution Guidelines Only trade when price reacts at your marked level Wait for the power bar to fully form before entering Do not jump in early or chase candles that form away from your levels
Pine Script® indicator
by elivgorelick
Key Session Levels | Highs, Lows, OpensOverview Designed for scalping and intraday trading on ES, NQ, and other futures markets that trade around the clock, this indicator automatically plots key support/resistance levels: Session opens Session highs Session lows Overnight highs Overnight lows Session Definitions (America/New_York Time) Session (18:00 - 16:59 ET) Tracks complete trading cycle Plots: High, Low Represents true daily extremes of each session Overnight Session (18:00 - 9:30 ET) Captures Asian and European session price action Plots: Open, High, Low These levels can act as support/resistance during the NY session NY Session (9:30 - 16:59 ET) Optional background highlight for regular trading hours Helps visually distinguish active NY session from overnight action Key Features Flexible Extension Modes Same Day: Lines end at session close Next Day: Lines extend through the following session Full Chart: Lines extend indefinitely to the right Smart Line Management Optional extension of overnight levels through NY session Control how many historical sessions to display (1-250) Automatic cleanup of old lines Full Customization Individual color control for each level Line style options (solid, dotted, dashed) Line width adjustment (1px-4px) Show/hide any level independently Common Use Cases Support/Resistance Breakout/Break & Retest Strategy Wait for price to reach a key level Use Level 2 data to determine who's in control at the level (e.g. aggressive buyers vs. passive sellers) *this requires third-party software and a live data feed Enter long/short WITH institutional players, identified via Level 2 data Target areas/levels where the market may reverse Best Timeframes Works on any intraday timeframe, optimized for: 1m, 5m, 15m, 30m, 1H Notes All times are in America/New_York (Eastern Time) Requires intraday timeframe to detect specific session times Lines are semi-transparent by default for better chart visibility
Pine Script® indicator
by rdjxyz
PDH/PDL + PMH/PML Breakout Table + Alerts + 🔔PDH/PDL now come exclusively from the previous day's RTH (9:30–4:00 PM ET) — they no longer include premarket. This avoids the confusion we encountered. PMH/PML are calculated only during the premarket period (4:00–9:30 AM ET) of the current day. Employment emojis: 🟢 (upward breakout for PDH/PMH), 🔴 (downward breakout for PDL/PML), ⚪ (no breakout). The table displays three columns: Level | Status | Price. If you'd like the table to have a different size/position/color, just adjust it quickly.
Pine Script® indicator
by roiler1995
Adaptive Trend Breaks Adaptive Trend Breaks ## WHAT IT DOES This script is a modified and enhanced version of "Trendline Breakouts With Targets" concept by ChartPrime. Adaptive Trend Breaks (ATB) is a trendline breakout system optimized for scalping liquid futures contracts. The indicator automatically draws dynamic support and resistance trendlines based on pivot points, then generates trade signals when price breaks through these levels with confirmation filters. It includes automated target and stop-loss placement with real-time P&L tracking in dollars. ## HOW IT WORKS **Trendline Detection Method:** The indicator uses pivot high/low detection to identify significant price turning points. When a new pivot forms, it calculates the slope between consecutive pivots to draw dynamic trendlines. These lines extend forward based on the established trend angle, creating actionable support and resistance zones. **Band System:** Around each trendline, the script creates a "band" using a volatility-adjusted calculation: `ATR(14) * 0.2 * bandwidth multiplier / 2`. This adaptive band accounts for current market conditions - wider during volatile periods, tighter during quiet markets. **Breakout Logic:** A breakout signal triggers when: 1. Price closes beyond the trendline + band zone 2. Volume exceeds the 20-period moving average by your set multiplier (default 1.2x) 3. Price is within Regular Trading Hours (9:30-16:00 EST) if session filter enabled 4. Current ATR meets minimum volatility threshold (prevents trading dead markets) **Target & Stop Calculation:** Upon breakout confirmation: - **Entry**: Trendline breach point - **Target**: Entry ± (bandwidth × target multiplier) - default 8x for quick scalps - **Stop**: Entry ± (bandwidth × stop multiplier) - default 8x for 1:1 risk/reward - Multipliers adjust automatically to market volatility through the ATR-based band **P&L Conversion:** The script converts point movements to dollars using: ``` Dollar P&L = (Price Points × Contract Point Value × Quantity) ``` For example, a 10-point NQ move with 2 contracts = 10 × $20 × 2 = $400 ## HOW TO USE IT **Setup:** 1. Select your instrument (NQ/ES/YM/RTY) - point values auto-configure 2. Set contract quantity for accurate dollar P&L 3. Choose pivot period (lower = more signals but more noise, default 5 for scalping) 4. Adjust bandwidth multiplier if trendlines are too tight/loose (1-5 range) **Filters Configuration:** - **Volume Filter**: Requires breakout volume > moving average × multiplier. Increase multiplier (1.5-2.0) for higher conviction trades - **Session Filter**: Enable to trade only RTH. Disable for 24-hour trading - **ATR Filter**: Prevents signals during low volatility. Increase minimum % for more active markets only **Risk Management:** - Set target/stop multipliers based on your risk tolerance - 8x bandwidth = approximately 1:1 risk/reward for most liquid futures - Enable trailing stops for trend-following approach (moves stop to protect profits) - Adjust line length to see targets further into the future **Statistics Table:** - Choose timeframe to analyze: all-time, today, this week, custom days - Monitor win rate, profit factor, and net P&L in dollars - Track long vs short performance separately - See real-time unrealized P&L on active trades **Reading Signals:** - **Green triangle below bar** = Long breakout (resistance broken) - **Red triangle above bar** = Short breakout (support broken) - **White dashed line** = Entry price - **Orange line** = Take profit target with dollar value - **Red line** = Stop loss with dollar value - **Green checkmark (✓)** = Target hit, winning trade - **Red X (✗)** = Stop hit, losing trade ## WHAT IT DOES NOT DO **Limitations to Understand:** - Does not predict future trendline formations - it reacts to breakouts after they occur - Historical trendlines disappear after breakout (not kept on chart for clarity) - Requires sufficient volatility - may not signal in extremely quiet markets - Volume filter requires exchange volume data (not available on all symbols) - Statistics are indicator-based simulations, not actual trading results - Does not account for slippage, commissions, or order fills ## BEST PRACTICES **Recommended Settings by Market:** - **NQ (Nasdaq)**: Default settings work well, consider volume multiplier 1.3-1.5 - **ES (S&P 500)**: Slightly slower, try period 7-8, volume 1.2 - **YM (Dow)**: Lower volatility, reduce bandwidth to 1.5-2 - **RTY (Russell)**: Higher volatility, increase bandwidth to 3-4 **Risk Management:** - Never risk more than 2-3% of account per trade - Use contract quantity calculator: Max Risk $ ÷ (Stop Distance × Point Value) - Start with 1 contract while learning the system - Backtest your specific timeframe and instrument before live trading **Optimization Tips:** - Increase pivot period (7-10) for fewer but higher-quality signals - Raise volume multiplier (1.5-2.0) in choppy markets - Lower target/stop multipliers (5-6x) for tighter profit taking - Use trailing stops in strong trending conditions - Disable session filter for overnight gaps and Asia session moves ## TECHNICAL DETAILS **Key Calculations:** - Pivot Detection: `ta.pivothigh(high, period, period/2)` and `ta.pivotlow(low, period, period/2)` - Slope Calculation: `(newPivot - oldPivot) / (newTime - oldTime)` - Adaptive Band: `min(ATR(14) * 0.2, close * 0.002) * multiplier / 2` - Breakout Confirmation: Price crosses trendline + 10% of band threshold **Data Requirements:** - Minimum bars in view: 500 for proper pivot calculation - Volume data required for volume filter accuracy - Intraday timeframes recommended (1min - 15min) for scalping - Works on any timeframe but optimized for fast execution **Performance Metrics:** All statistics calculate based on indicator signals: - Tracks every signal as a trade from entry to TP/SL - P&L in actual contract dollar values - Win rate = (Winning trades / Total trades) × 100 - Profit factor = Gross profit / Gross loss - Separates long/short performance for bias analysis ## IDEAL FOR - Futures scalpers and day traders - Traders who prefer visual trendline breakouts - Those wanting automated TP/SL placement - Traders tracking performance in dollar terms - Multiple timeframe analysis (compare 1min vs 5min signals) ## NOT SUITABLE FOR - Swing trading (targets too close) - Stocks/forex without modifying point values - Extremely low timeframes (<30 seconds) - too much noise - Markets without volume data if using volume filter - Illiquid contracts (signals may not execute at shown prices) --- **Settings Summary:** - Core: Period, bandwidth, extension, trendline style - Filters: Volume, RTH session, ATR volatility - Risk: R:R ratio, target/stop multipliers, trailing stop - Display: Stats table position, size, colors - Stats: Timeframe selection (all-time to custom days) **License:** This indicator is published open-source under Mozilla Public License 2.0. You may use and modify the code with proper attribution. **Disclaimer:** This indicator is for educational purposes. Past performance does not guarantee future results. Always practice proper risk management and test thoroughly before live trading. --- ## CREDITS & ATTRIBUTION This script builds upon the "Trendline Breakouts With Targets" concept by ChartPrime with significant enhancements: **Major Improvements Added:** - **Futures-Specific Calculations**: Automated dollar P&L conversion using actual contract point values (NQ=$20, ES=$50, YM=$5, RTY=$50) - **Advanced Statistics Engine**: Comprehensive performance tracking with customizable timeframe analysis (today, week, month, custom ranges) - **Multi-Layer Filtering System**: Volume confirmation, RTH session filter, and ATR volatility filter to reduce false signals - **Professional Trade Management**: Enhanced visual trade tracking with separate TP/SL lines, dollar value labels, and optional trailing stops - **Optimized for Scalping**: Faster pivot periods (5 vs 10), tighter bands, and reduced extension bars for quick entries Original trendline detection methodology by ChartPrime - used with modification under Mozilla Public License 2.0.
Pine Script® indicator
by TradeManager_PRO
ALMASTO – Pro Trend & Momentum (v1.1)ALMASTO — Pro Trend & Momentum Strategy Description: This strategy is designed for precision trading in both Forex (FX) and Crypto markets. It combines multi-timeframe trend confirmation (EMA200), momentum filters (RSI, MACD, ADX), and ATR-based dynamic risk management. ALMASTO — Pro Trend & Momentum Strategy automatically manages take-profit levels, stop-loss, and breakeven adjustments once TP1 is reached — providing a structured and emotion-free trading approach. Optimal Use Works best on lower timeframes (5m–15m) with strong liquidity sessions. Optimized for pairs like EURUSD, XAUUSD, and BTCUSDT. Built for trend-following setups and momentum reversals with high volatility confirmation. Recommended Settings 🔹 Forex – 5m EMA Fast = 34, EMA Slow = 200, HTF = 1H RSI (14): Long ≥ 55 / Short ≤ 45 MACD (8 / 21 / 5), ADX Len 10 / Min 27 ATR Len 7, Stop Loss = ATR × 2.1 TP1 = 1.1 RR, TP2 = 2.3 RR Session = 07:00–11:00 & 12:30–16:00 (Exchange Time) Risk = 0.8% per trade 🔹 Forex – 15m EMA Fast = 50, EMA Slow = 200, HTF = 4H RSI (14): Long ≥ 53 / Short ≤ 47 MACD (12 / 26 / 9), ADX Min 24 ATR Len 10, SL = ATR × 1.9 TP1 = 1.2 RR, TP2 = 2.6 RR Risk = 1.0% per trade 🔹 Crypto – 5m (BTC/USDT) EMA Fast = 34, EMA Slow = 200, HTF = 4H RSI (14): Long ≥ 56 / Short ≤ 44 MACD (8 / 21 / 5), ADX Min 30 ATR Len 7, SL = ATR × 2.2 TP1 = 1.0 RR, TP2 = 2.5 RR Session = 00:00–06:00 & 12:00–22:00 (UTC) Risk = 0.5% per trade Core Features ✅ Auto breakeven after TP1 ✅ Dual take-profit system (1:1 & 1:2 RR) ✅ ATR-based stop & trailing logic ✅ Filters for session time, volume, and volatility ✅ Candle-body vs ATR size filter to avoid noise ✅ Optional cooldown between trades Important Notes Use bar close confirmation only (barstate.isconfirmed) to avoid repainting on lower timeframes. Adjust commission (0.01–0.03%) and slippage (1–2 ticks) in Strategy Tester for realistic results. Avoid low-liquidity hours (after 21:00 UTC for FX / after midnight for crypto). Backtest using realistic broker data (e.g., BlackBull Markets / Bybit / Binance Futures). Best results occur during London & New York sessions with moderate volatility. ⚠️ Disclaimer This script is for educational and research purposes only. It does not constitute financial advice. Use proper risk management and test thoroughly before using on live accounts. Developed by KING FX Labs Built and optimized by Yousef Almasto — combining advanced price-action logic, multi-timeframe EMA structure, and volatility-adaptive ATR management. Tested across Forex, Gold, and Crypto markets to ensure consistent performance and minimal drawdown. 📈 “Precision Trading. Zero Emotion. Pure Momentum.”
Pine Script® strategy
by A-Yousef
RSI Core Analysis EngineHI traders This tool employs a higher-sensitivity RSI than conventional settings to capture market shifts earlier. When the Ultra Fast RSI (UF) approaches upper or lower extremes, short-term profit-taking or pullbacks tend to occur, and a crossover between UF and the Composite RSI can serve as a signal of a regime change. However, in strong trends the RSI can remain pinned for extended periods, so combine it with ADX, volume, and volatility measures to improve accuracy. While early detection is an advantage, it also increases noise. This tool uses a four-stage confirmation process (DMI/ADX → MACD/Stochastics/RSI acceleration → five-layer alignment) and quality/confidence scores to filter for higher-expectancy setups. It will not be effective in every market condition. Use it with predefined stop-losses and prudent position sizing. ------------------------------------------------------------------------------------------------------- Strongly recommended preset (because the indicator packs many features): Step 1 — Inputs tab Center Level: 50 OB1: 60, OB2: 70, OB3: 95 OS1: 40, OS2: 30, OS3: 5 Step 2 — Style tab ✅ Ultra Fast RSI — Thickest ✖ Fast RSI ✖ Medium RSI ✖ Standard RSI ✖ Slow RSI ✅ Composite RSI — Thickest ✅ Stage Indicator ✖ RSI Velocity ✖ RSI Acceleration ✅ Quality Score ✅ Bullish Cross ✅ Bearish Cross ✅ Strong Signal Background Levels: ・✅ Center 50 — Thickest ・✅ OB1 60, OB2 70, OB3 95 (thicker) ・✅ OS1 40, OS2 30, OS3 5 (thicker) ------------------------------------------------------------------------------------------------------------- thats enough have a nice trade
Pine Script® indicator
by Hunk77
Multiple Smoothed Moving AveragesMultiple Smoothed Moving Averages (SMMAs) This indicator displays up to 5 Smoothed Moving Averages (SMMAs) on your chart, providing a comprehensive view of multiple trend timeframes simultaneously. ═══════════════════════════════════════ WHAT IS A SMOOTHED MOVING AVERAGE? ═══════════════════════════════════════ The Smoothed Moving Average (SMMA), also known as the Running Moving Average (RMA), is a type of moving average that provides more smoothing than a Simple Moving Average (SMA). Unlike SMA which gives equal weight to all values in the period, SMMA uses a recursive formula that gives more weight to previous SMMA values, resulting in: - Smoother price action with less noise - Slower response to recent price changes - Better identification of longer-term trends - Reduced false signals in choppy markets CALCULATION METHOD: - First value: Simple Moving Average of the initial period - Subsequent values: (Previous SMMA × (Length - 1) + Current Price) / Length This recursive nature makes SMMA particularly effective for identifying sustained trends while filtering out short-term volatility. ═══════════════════════════════════════ FEATURES ═══════════════════════════════════════ ✓ 5 Independent SMMAs: Each with its own configurable period length ✓ Individual Toggles: Show/hide each SMMA independently ✓ Distinct Colors: Easy visual identification of each moving average ✓ Customizable Lengths: Adjust each period to match your trading strategy ✓ Shared Source: All SMMAs calculate from the same price source (default: close) ✓ Overlay Display: Plots directly on the price chart ═══════════════════════════════════════ DEFAULT SETTINGS ═══════════════════════════════════════ - SMMA 1: 30 periods (Blue) - SMMA 2: 50 periods (Orange) - SMMA 3: 100 periods (Green) - SMMA 4: 200 periods (Purple) - SMMA 5: 300 periods (Red) All SMMAs are enabled by default. ═══════════════════════════════════════ HOW TO USE ═══════════════════════════════════════ TREND IDENTIFICATION: - Price above all SMMAs = Strong uptrend - Price below all SMMAs = Strong downtrend - Price between SMMAs = Transitional phase or consolidation SUPPORT & RESISTANCE: - SMMAs often act as dynamic support in uptrends - SMMAs often act as dynamic resistance in downtrends - Longer-period SMMAs (200, 300) provide stronger S/R levels CROSSOVER SIGNALS: - Faster SMMA crossing above slower SMMA = Bullish signal - Faster SMMA crossing below slower SMMA = Bearish signal MULTIPLE TIMEFRAME ANALYSIS: - Short-term trends: 30, 50 periods - Medium-term trends: 100 periods - Long-term trends: 200, 300 periods ═══════════════════════════════════════ CUSTOMIZATION ═══════════════════════════════════════ INPUTS TAB: - Adjust each SMMA length to suit your trading timeframe - Toggle individual SMMAs on/off using checkboxes - Change the source (close, open, high, low, hl2, hlc3, ohlc4) STYLE TAB: - Modify line colors for each SMMA - Adjust line thickness and style - Change transparency levels ═══════════════════════════════════════ NOTES ═══════════════════════════════════════ - This indicator uses the mathematically correct SMMA calculation with the recursive formula - All calculations are performed on every bar to ensure data consistency - SMMAs respond more slowly than EMAs but faster than WMAs to price changes - Best used in combination with other technical analysis tools - Use on any timeframe ═══════════════════════════════════════ Perfect for traders who want a clear, multi-timeframe view of market trends using the smooth, reliable SMMA calculation method.
Pine Script® indicator
by rdjxyz
MNQ Morning Indicator | Clean SignalsMNQ Morning Trading Indicator Summary What It Does This is a TradingView indicator designed for day trading MNQ (Micro Nasdaq-100 futures) during morning sessions. It generates BUY and SELL signals only when multiple technical conditions align, helping traders identify high-probability trade setups. Core Strategy BUY Signal Requirements (All must be true): ✅ Price above VWAP (volume-weighted average price) ✅ Fast EMA (9) above Slow EMA (21) - uptrend confirmation ✅ Price above 15-minute 50 EMA - higher timeframe confirmation ✅ MACD histogram positive - momentum confirmation ✅ RSI above 55 - strength confirmation ✅ ADX above 25 - trending market (not choppy) ✅ Volume 1.5x above average - strong participation SELL Signal (opposite conditions) Key Features 🎯 Risk Management Stop Loss: 2× ATR (Average True Range) Take Profit 1: 2× ATR (1:2 risk-reward) Take Profit 2: 3× ATR (1:3 risk-reward) Dollar values: Calculates P&L based on MNQ's $2/point value ⏰ Session Filter Default: 9:30 AM - 11:30 AM ET (customizable) Safety feature: Avoids first 15 minutes (high volatility period) Won't generate signals outside trading hours 🛡️ Signal Quality Rates each signal: 🔥 STRONG, ⚡ MEDIUM, or ⚠️ WEAK Requires minimum 15 bars between signals (prevents overtrading) 📊 Visual Dashboard Shows real-time metrics: ATR values ADX (trend strength) RSI (momentum) Market condition (TREND/CHOP) Session status Volume status Signal cooldown timer Visual Elements 📈 VWAP with standard deviation bands (1σ, 2σ, 3σ) 📉 Multiple EMAs with trend-based coloring 🟢/🔴 Buy/Sell arrows on chart 📋 Detailed trade labels showing entry, SL, TPs, and risk-reward ratios 🎨 Background highlighting for market conditions Safety Features Cooldown period between signals Session restrictions (no trading outside set hours) First 15-minute avoidance (post-open volatility) Multi-confirmation requirement (all 7 conditions must align) Trend filter (ADX minimum to avoid choppy markets) Best For Day traders focused on morning sessions MNQ futures traders Traders who prefer systematic, rule-based entries Those wanting pre-calculated risk management levels Customization All parameters are adjustable: EMA periods MACD settings RSI thresholds ADX minimum ATR multipliers Session times Visual preferences This indicator is designed to be conservative — it waits for strong confirmation before signaling, which means fewer but potentially higher-quality trades.
Pine Script® indicator
by elivgorelick
1m Scalping ATR (with SL & Zones)A universal ATR indicator that anchors volatility to your stop-loss. Read any market (FX, JPY pairs, Gold/Silver, indices, crypto) consistently—regardless of pip/point conventions and timeframe. Why this indicator? Classic ATR is absolute (pips/points) and feels different across markets/TFs. ATR Takeoff normalizes ATR to your stop-loss in pips and highlights clear zones for “quiet / ideal / too volatile,” so you instantly know if a 10-pip SL fits current conditions. Key features Auto pip detection (FX, JPY, XAU/XAG, indices, BTC/ETH). Selectable ATR source: chart timeframe or fixed ATR TF (e.g., “15”, “30”, “60”). Display modes: Percent of SL – ATR relative to SL in %, great for M1 (typical 10–30%). Multiple of SL – ATR as a multiple of SL (e.g., 0.6× / 1.0× / 1.2×). Panel zones: Green = “Ready for takeoff” (≤ Low), Yellow = reference (Mid), Red = too volatile (≥ High). Status badge (top-right): Quiet / ATR ok / Wild, current ATR/SL value, ATR TF used. Direction-agnostic: Works the same for longs and shorts. Inputs (at a glance) Length / Smoothing (RMA/SMA/EMA/WMA): ATR base settings. Your Stop-Loss (Pips): Reference SL (e.g., 10). ATR Timeframe (empty = chart): Use chart TF or a fixed TF. Display Mode: “Percent of SL” or “Multiple of SL.” Low/Mid/High (Percent Mode): Zone thresholds in % of SL. Low/Mid/High (Multiple Mode): Zone thresholds in ×SL. Recommended defaults Length 14, Smoothing RMA, SL 10 pips Display Mode: Percent of SL Low/Mid/High (%): 15 / 20 / 25 ATR Timeframe: empty (= chart) for reactive, or “30” for smoother M30 context with M1 entries. How to use Set SL (pips). 2) Choose display mode. 3) Optionally pick ATR TF. Interpretation: ≤ Low (green): setups allowed. ≈ Mid (yellow): neutral reference. ≥ High (red): too volatile → adjust SL/size or wait. Note: Auto-pip relies on common ticker naming; verify on exotic symbols. Disclaimer: For research/education. Not financial advice.
Pine Script® indicator
by Patrik_Kreuzweger
2
RMBS Smart Detector - Multi-Factor Momentum System # RMBS Smart Detector - Multi-Factor Momentum System ## Overview RMBS (Smart Detector - Multi-Factor Momentum System) is a proprietary scoring method developed by Ario, combining normalized RSI and Bollinger band positioning into a single composite metric. --- ## Core Methodology ### Buy/Sell Logic  Marker (green or red )appear when **all four filters** pass: **1. RMBS Score (Momentum Strength)** From the formula Bellow Combined Range: -10 (extreme bearish) to +10 (extreme bullish) Signal Thresholds: • BUY: Score > +3.0 • SELL: Score < -3.0 2. EMA Trend Filter BUY: EMA(21) > EMA(55) → Uptrend confirmed SELL: EMA(21) < EMA(55) → Downtrend confirmed 3. ADX Strength Filter Minimum ADX: 25 (adjustable 20-30) ADX > 25: Trending market → Signal allowed ADX < 25: Range-bound → Signal blocked 4. Alternating Logic Prevents signal spam by requiring alternation: ✓ BUY → SELL → BUY (allowed) ✗ BUY → BUY → BUY (blocked) ________________________________________ Mathematical Foundation RMBS Formula: scoring method developed by Ario RMBS = (RSI – 50) / 10 + ((BB_pos – 50) / 10) where: • RSI = Relative Strength Index (close, L) • BB_pos = (Close – (SMA – 2 σ)) / ((SMA + 2 σ) – (SMA – 2 σ)) × 100 • σ = standard deviation of close over lookback L • SMA = simple moving average of close over lookback L • L = rmbs_length (period setting) This produces a normalized composite score around zero: • Positive → bullish momentum and upper band dominance • Negative → bearish momentum and lower band pressure • Near 0 → neutral or transitional zone Input Parameters ADX Threshold (default: 25) • Lower (20-23): More signals, less filtering • Higher (28-30): Fewer signals, stronger trends • Recommended: 25 for balanced filtering Signal Thresholds • BUY: +3.0 (adjustable) • SELL: -3.0 (adjustable) Visual Options • Marker colors • Background highlights • Alert settings ________________________________________ Usage Guidelines How to Interpret • 🟢 Green Marker: All conditions met for Bull condition • 🔴 Red Marker: All conditions met for Bear condition • No Marker: Waiting for confirmation ________________________________________ Important Disclaimers ⚠️ Educational Purpose Only • This tool demonstrates multi-factor technical analysis concepts • Not financial advice or trade recommendations • No guarantee of profitability ⚠️ Known Limitations • Less effective in ranging/choppy markets • Requires proper risk management (stop-loss, position sizing) • Should be combined with fundamental analysis ⚠️ Risk Warning Trading involves substantial risk of loss. Past performance does not indicate future results. Always conduct your own research and consult professionals before trading. ________________________________________ Open Source Full Pine Script code available for educational study and modification. Feedback and improvement suggestions welcome. “All logic is presented for research and educational visualization.” --- **Attribution & Fair Use Notice** The RMBS scoring framework (Multi-Factor Momentum System) was originally designed and formulated by *Ahmadrezarahmati( Ario or Ario_ Pine Lab)*. If you build upon, modify, or republish this logic—please include proper attribution to the original author. This request is made under a spirit of open collaboration and educational fairness.
Pine Script® indicator
by Ario_pinelab
Camarilla Pivots + 20 EMA StrategyThis is an intraday volatility and trend-following system for commodities like Natural Gas, combining dynamic pivot levels (Camarilla) with a trend filter (20-period EMA) to improve risk-reward and reduce false breakouts. Core Components 1. Camarilla Pivots: These are special support and resistance levels (H3, H4, L3, L4) calculated each day based on the previous day's high, low, and close. The pivots adapt to daily volatility, giving more relevant breakout and bounce zones than static lines. H4: Aggressive resistance (used for breakout LONG entry) H3: Moderate resistance/support (used for bounce or stoploss) L4: Aggressive support (used for breakout SHORT entry) L3: Moderate support/resistance (used for bounce or stoploss) 2. 20 EMA (Exponential Moving Average): Plotted on the 30-minute chart, this acts as a trend filter. If the price is above 20 EMA: Only look for long trades (bullish bias). If below 20 EMA: Only look for short trades (bearish bias). How the Strategy Works Setup (30-Min Chart): Camarilla pivots for the day are drawn on the chart. 20 EMA is also plotted. Trade Filter: Bullish: Trade ONLY if price is above 20 EMA. Bearish: Trade ONLY if price is below 20 EMA. Entry: LONG: Enter when price breaks and closes above the H4 pivot AND is above 20 EMA. SHORT: Enter when price breaks and closes below the L4 pivot AND is below 20 EMA. Stop Loss: LONG: Place stoploss at H3 (the next lower Camarilla resistance). SHORT: Place stoploss at L3 (the next higher Camarilla support). Target: Always set a profit target at 2x the distance (risk) between entry and stoploss (strict R:R 2). For example, if your entry is at H4 and stoploss at H3, your target is entry + 2*(entry - stoploss). Alerts & Visuals: The strategy plots entry arrows, stoploss and target lines for immediate visual reference. Alerts trigger on breakout signals so you never miss a trade. Why This Works Well for Natural Gas Adapts to volatility: The pivots change daily, handling wide-ranging and choppy price moves better than fixed breakouts. Trend filter: EMA prevents counter-trend whipsaws, only trades with market momentum. Risk control: Every trade must meet strict risk-reward criteria, so losses are contained and winners can outweigh losers.
Pine Script® strategy
by vinaygaur97
Triple RSI Strategy @AshokTrendThe Triple RSI Strategy is a trading approach that uses three separate Relative Strength Index (RSI) indicators, typically set to different periods, to generate buy and sell signals with potentially higher accuracy. It aims to filter false signals and improve the probability of successful trades by confirming conditions across multiple timeframes or sensitivity levels. How the Triple RSI Strategy Works: Different RSI Periods: Usually set with short, medium, and long periods (e.g., 5, 14, and 30). Buy Signal: When all three RSIs indicate oversold conditions (below a certain threshold like 30) and show upward momentum. Sell Signal: When all three RSIs indicate overbought conditions (above a certain threshold like 70) and show downward momentum. Confirmation: The strategy often confirms signals when the shorter RSI crosses its own previous value or an opposite threshold. Benefits: Reduces false signals by requiring multiple conditions. Suitable for trending or ranging markets, depending on parameters. Customizable for different assets and timeframes. Concepts used- SMC Trendline Breakout, Suitable for Long traders. ⦁ Disclaimer: The content in this Article is for educational purposes only and should not be considered financial advice. We are not SEBI-registered advisors. Options trading is highly volatile and carries significant risk. Consult a qualified financial advisor before making any investment decisions.. About Us: We provide educational content on trading strategies and market analysis. Connect With Us: For business inquiries, email us at: customercare@eamzn.in For our trading course, contact us on WhatsApp: Backtesting Services: We offer strategy backtesting on TradingView. Contact us for details.
Pine Script® strategy
by ashok137a
Realtime rVOL w/ Candle Highlight [Blk0ut]About This Script Realtime rVOL Table + Candle Highlight (Presets, No Smoothing) By Blk0ut This tool visualizes real-time relative volume (rVOL) directly on your chart and in a compact table, helping traders identify where intraday participation deviates from the session’s baseline. Unlike standard volume overlays, this script recalculates rVOL dynamically through the session and highlights candles when participation exceeds configurable thresholds — providing a clear picture of ignition zones, volume surges, and potential breakout conditions. Core Features -Realtime rVOL tracking: Displays the current bar’s relative volume ratio compared to a moving baseline of recent bars. -Preset Profiles: Choose from four purpose-built profiles to quickly adjust the rVOL sensitivity to your trading horizon. ---------------------------------------------------------------------- *Opening Rush: 100-bar lookback, threshold 2.5* *RTH 5m: 30-bar lookback, threshold 1.2* *RTH 1hr: 50-bar lookback, threshold 1.5* *RTH 1d+: 100-bar lookback, threshold 1.5* ---------------------------------------------------------------------- RTH-only filter: Option to limit the moving average baseline to regular market hours (09:30–16:00). Candle highlighting: Optionally outlines candles when rVOL exceeds the active threshold to emphasize spikes visually in real time. Table display: Compact dashboard showing current rVOL, raw volume, average baseline, and preset parameters. How To Use Select a preset that matches your timeframe or trading style. Scalpers and open traders can use RTH 5m or Opening Rush. Position or swing traders may prefer RTH 1hr or RTH 1d+. Watch for rVOL readings above the threshold (and colored candle outlines). These often correspond to momentum ignition, news impact, or institutional activity. Combine with VWAP, ORB, or intraday key levels for best confirmation. Notes The table automatically adapts to your chart corner choice. Highlight thresholds can follow the preset or be set manually. Color intensity tiers (High/Medium/Low) can be tuned in settings. Designed for intraday and session-based traders who rely on live volume context rather than end-of-day stats.
Pine Script® indicator
by Blk0ut
Micro SuiteWhat it is: One Pine v5 indicator that stacks several tools: EMA ribbon + a color-flipping 11/34 EMA trend line, multi-timeframe RSI pressure arrows, and a Bollinger Band re-entry system that marks Top/Bottom triggers (T/B) and later “r” confirmations. It also sprinkles in 3-Line Strike, Leledc exhaustion dots, and a small “Micro Dots” engine (ATR regime + VMA filter). Alerts for all of it. TradingView The core signals you’ll actually use: RSI arrows: Up arrow when current RSI(6) < 30 and selected higher-TF RSIs are also < 30; down arrow when > 70 cluster cools. Idea = stacked OB/OS “pressure.” TradingView Bollinger re-entry (T/B + r): T = first close back inside upper band; B = first close back inside lower band. r = confirmation within N bars (price takes out the trigger bar’s high/low). These bars tint so they’re easy to see. TradingView Trend filter: EMA-11 vs EMA-34 color flip + optional VMA trend line; helps you ignore counter-trend stabs. TradingView Quick playbook (how to read it): Reversal short: See a T near the top band → get the r within your window → bonus if a down RSI arrow or a Leledc high dot shows up. Reversal long: Mirror that with B → r, plus an up RSI arrow/Leledc low dot. Continuation: If Micro Dot stays green (or red) and 11>34 EMA holds, ignore isolated T/B traps. TradingView Inputs that matter: confirmBars for the T/B “r” window. Which higher-TF RSIs must agree for arrows. Show/hide and lengths for EMAs and BB. Micro block: show dots, VMA line, and speed (Fast/Med/Slow). TradingView Why people like it: You get trend, momentum, and mean-revert cues on one pane with ready-made alerts, so it’s easier to build a ruleset (e.g., “only take B→r longs when 11>34 and there’s an RSI up arrow”). TradingView Caveats: It’s still just TA—OB/OS clusters can persist in trends; confirmations can miss V-shaped turns; and stacking signals can be late in fast markets. Pair it with risk rules (fixed R, ATR stops) and a higher-TF bias. One-liner cheat sheet: Longs: B → r + RSI up arrow + 11>34 (optional Micro Dot green). Shorts: T → r + RSI down arrow + 11<34 (optional Micro Dot red). TradingView
Pine Script® indicator
by BigeMarket
DCC Sessions Pro — fixed sessionsDCC Sessions Pro automatically highlights the three main market sessions directly on your candles for a clean and professional chart view. • Asia (purple): 01:00 – 08:00 • London (blue): 08:00 – 15:30 • US (orange): 15:30 – 23:00 Weekends are automatically excluded so you only see relevant price action. Perfect for intraday traders who want to track session behavior, volume shifts, and liquidity timing without overlapping colors or messy backgrounds.
Pine Script® indicator
by JustinJoshua
Katana_Fox RSI Pro - Advanced Momentum Indicator with Clear BUOverview: Connors RSI Pro is a sophisticated enhancement of the classic Connors RSI indicator, designed for traders who demand professional-grade tools. This premium version combines multiple momentum components with intelligent signaling and beautiful visualization to give you an edge in the markets. Key Features: 🎯 Clear BUY/SELL Signal System BUY signals in green when CRSI crosses above oversold level SELL signals in red when CRSI crosses below overbought level Clean, professional labels that are easy to read Customizable overbought/oversold levels (70/30 default) 🎨 Professional Visualization Modern color scheme that adapts to market conditions Customizable background fills for better readability Smooth, easy-to-read line plotting ⚡ Enhanced Calculations Triple-component momentum analysis (RSI, UpDown RSI, Percent Rank) EMA smoothing for reduced noise and false signals Configurable lengths for each component 🔔 Advanced Alert System 4 distinct alert conditions for various market scenarios Compatible with TradingView's native alert system Perfect for automated trading strategies Input Parameters: RSI Length (3): Period for standard RSI calculation UpDown Length (2): Period for UpDown RSI component ROC Length (100): Period for Rate of Change percentile ranking Signal Alerts: Toggle BUY/SELL signals on/off Custom Colors: Choose between classic and modern color schemes Trading Signals: BUY (Green Label): Bullish signal when CRSI crosses above oversold level SELL (Red Label): Bearish signal when CRSI crosses below overbought level Background Colors: Visual zones indicating momentum strength Ideal For: Swing traders seeking momentum reversals Day traders looking for overbought/oversold conditions Algorithmic traders needing reliable signals Technical analysts wanting multi-timeframe confirmation How to Use: Oversold Bounce: Enter long when CRSI shows BUY signal above 30 Overbought Rejection: Enter short when CRSI shows SELL signal below 70 Trend Confirmation: Use the 50-level crossover for trend direction Divergence Trading: Look for price/indicator divergences at extremes Upgrade your trading arsenal with Connors RSI Pro - where professional analytics meet clear trading signals!
Pine Script® indicator
by Katana_Fox
Advantage RSI PredictorThe Relative Strength Index (RSI) is a widely used momentum oscillator that measures the speed and change of price movements, typically on a scale from 0 to 100, to identify overbought (above 70) or oversold (below 30) conditions. However, its reliance on historical data limits its ability to predict future price movements. To overcome this, an advanced indicator—termed the Advanced RSI Predictor (ARP)—can be developed to provide predictive bands for RSI levels, enhancing its forecasting potential.The ARP leverages machine learning techniques, such as Long Short-Term Memory (LSTM) networks, combined with traditional RSI calculations to forecast future RSI values and establish confidence intervals or bands. These bands represent a range within which the RSI is likely to fluctuate over a specified period, offering traders a probabilistic perspective on momentum shifts. The indicator starts with the standard RSI computation, using a 14-period lookback as a foundation, but enriches this by incorporating additional inputs like moving averages, volatility measures (e.g., Bollinger Bands width), and trading volume. These features are processed through an LSTM model trained on historical price and RSI data to predict future RSI trajectories.The output includes upper and lower predictive bands, typically set at a 95% confidence level, surrounding a central forecasted RSI line. For example, if the current RSI is 45, the ARP might project a band from 40 to 50 over the next five days, indicating potential momentum stability or a range for overbought/oversold thresholds. The bands adapt dynamically to market conditions—narrowing during stable trends and widening during volatile periods—using real-time data updates. This adaptability allows traders to anticipate breakouts or reversals before they manifest on the price chart.Validation can be strengthened through backtesting against historical data, ensuring the ARP’s bands align with significant market turns. This indicator proves especially valuable in trending markets, where traditional RSI levels (e.g., 70 or 30) may falter, offering a sophisticated tool for informed trading or investment decisions.
Pine Script® indicator
by FomoFutures
John Bollinger's Bollinger BandsJapanese below / 日本語説明は下記 This indicator replicates how John Bollinger, the inventor of Bollinger Bands, uses Bollinger Bands, displaying Bollinger Bands, %B and Bandwidth in one indicator with alerts and signals. Bollinger Bands is created by John Bollinger in 1980s who is an American financial trader and analyst. He introduced %B and Bandwidth 30 years later. 🟦 What's different from other Bollinger Bands indicator? Unlike the default Bollinger Bands or other custom Bollinger Bands indicators on TradingView, this indicator enables to display three Bollinger Bands tools into a single indicator with signals and alerts capability. You can plot the classic Bollinger Bands together with either %B or Bandwidth or three tools altogether which requires the specific setting(see below settings). This makes it easy to quantitatively monitor volatility changes and price position in relation to Bollinger Bands in one place. 🟦 Features: Plots Bollinger Bands (Upper, Basis, Lower) with fill between bands. Option to display %B or Bandwidth with Bollinger Bands. Plots highest and lowest Bandwidth levels over a customizable lookback period. Adds visual markers when Bandwidth reaches its highest (Bulge) or lowest (Squeeze) value. Includes ready-to-use alert conditions for Bulge and Squeeze events. 📈Chart Green triangles and red triangles in the bottom chart mark Bulges and Squeezes respectively. 🟦 Settings: Length: Number of bars used for Bollinger Band middleline calculation. Basis MA Type: Choose SMA, EMA, SMMA (RMA), WMA, or VWMA for the midline. StdDev: Standard deviation multiplier (default = 2.0). Option: Select "Bandwidth" or "%B" (add the indicator twice if you want to display both). Period for Squeeze and Bulge: Lookback period for detecting the highest and lowest Bandwidth levels.(default = 125 as specified by John Bollinger ) Style Settings: Colors, line thickness, and transparency can be customized. 📈Chart The chart below shows an example of three Bollinger Bands tools: Bollinger Band, %B and Bandwidth are in display. To do this, you need to add this indicator TWICE where you select %B from Option in the first addition of this indicator and Bandwidth from Option in the second addition. 🟦 Usage: 🟠Monitor Volatility: Watch Bandwidth values to spot volatility contractions (Squeeze) and expansions (Bulge) that often precede strong price moves. John Bollinger defines Squeeze and Bulge as follows; Squeeze: The lowest bandwidth in the past 125 period, where trend is born. Bulge: The highest bandwidth in the past 125 period where trend is going to die. According to John Bollinger, this 125 period can be used in any timeframe. 📈Chart1 Example of Squeeze You can see uptrends start after squeeze(red triangles) 📈Chart2 Example of Bulge You can see the trend reversal from downtrend to uptrends at the bulge(green triangles) 📈Chart3 Bulge DOES NOT NECESSARILY mean the beginning of a trend in opposite direction. For example, you can see a bulge happening in the right side of the chart where green triangles are marked. Nevertheless, uptrend still continues after the bulge. In this case, the bulge marks the beginning of a consolidation which lead to the continuation of the trend. It means that a phase of the trend highlighted in the light blue box came to an end. Note: light blue box is not drawn by the indicator. Like other technical analysis methods or tools, these setups do not guarantee birth of new trends and trend reversals. Traders should be carefully observing these setups along with other factors for making decisions. 🟠Track Price Position: Use %B to see where price is located in relation to the Bollinger Bands. If %B is close to 1, the price is near upper band while %B is close to 0, the price is near lower band. 🟠Set Alerts: Receive alerts when Bandwidth hits highest and lowest values of bandwidth, helping you prepare for potential breakout, ending of trends and trend reversal opportunities. 🟠Combine with Other Tools: This indicator would work best when combined with price action, trend analysis, or market environmental analysis. ————————————————————————————— このインジケーターはボリンジャーバンドの考案者であるジョン・ボリンジャー氏が提唱するボリンジャーバンドの使い方を再現するために、ボリンジャーバンド、%B、バンドウィズ(Bandwidth) の3つを1つのインジケーターで表示可能にしたものです。シグナルやアラートにも対応しています。 ボリンジャーバンドは1980年代にアメリカ人トレーダー兼アナリストのジョン・ボリンジャー氏によって開発されました。彼はその30年後に%Bとバンドウィズを導入しました。 🟦 他のボリンジャーバンドとの違い TradingView標準のボリンジャーバンドや他のボリンジャーバンドとは異なり、このインジケーターでは3つのボリンジャーバンドツールを1つのインジケーターで表示し、シグナルやアラート機能も利用できるようになっています。 一般的に知られている通常のボリンジャーバンドに加え、%Bやバンドウィズを組み合わせて表示でき、設定次第では3つすべてを同時にモニターすることも可能です。これにより、価格とボリンジャーバンドの位置関係とボラティリティ変化をひと目で、かつ定量的に把握することができます。 🟦 機能: ボリンジャーバンド（アッパーバンド・基準線・ロワーバンド）を描画し、バンド間を塗りつぶし表示。 オプションで%Bまたはバンドウィズを追加表示可能。 バンドウィズの最高値・最安値を、任意の期間で検出して表示。 バンドウィズが指定期間の最高値（バルジ※）または最安値（スクイーズ）に達した際にシグナルを表示。 ※バルジは一般的にボリンジャーバンドで用いられるエクスパンションとほぼ同じ意味ですが、定義が異なります。(下記参照) バルジおよびスクイーズ発生時のアラート設定が可能。 📈 チャート例
 下記チャートの緑の三角と赤の三角は、それぞれバルジとスクイーズを示しています。 🟦 設定: Length: ボリンジャーバンドの基準線計算に使う期間。 Basis MA Type: SMA, EMA, SMMA (RMA), WMA, VWMAから選択可能。 StdDev: 標準偏差の乗数（デフォルト2.0）。 Option: 「Bandwidth」または「%B」を選択（両方表示するにはこのインジケーターを2回追加）。 Period for Squeeze and Bulge: Bandwidthの最高値・最安値を検出する期間（デフォルトはジョン・ボリンジャー氏が推奨する125）。 Style Settings: 色、線の太さ、透明度などをカスタマイズ可能。 📈 チャート例
 下のチャートは「ボリンジャーバンド」「%B」「バンドウィズ」の3つを同時に表示した例です。
この場合、インジケーターを2回追加し、最初に追加した方ではOptionを「%B」に、次に追加した方では「Bandwidth」を選択します。 🟦 使い方: 🟠 ボラティリティを監視する:
 バンドウィズの値を見ることで、価格変動の収縮（スクイーズ）や拡大（バルジ）を確認できます。 これらはしばしば強い値動きの前兆となります。 ジョン・ボリンジャー氏はスクイーズとバルジを次のように定義しています： スクイーズ: 過去125期間の中で最も低いバンドウィズ→ 新しいトレンドが生まれる場所。 バルジ: 過去125期間の中で最も高いバンドウィズ → トレンドが終わりを迎える場所。 この「125期間」はどのタイムフレームでも利用可能とされています。 📈 チャート1 スクイーズの例
赤い三角のスクイーズの後に上昇トレンドが始まっているのが確認できます。
 📈 チャート2 バルジの例
緑の三角のバルジの箇所で下降トレンドから上昇トレンドへの反転が見られます。
 📈 チャート3 バルジが必ずしも反転を意味しない例
 下記のチャート右側の緑の三角で示されたバルジの後も、上昇トレンドが継続しています。
この場合、バルジは反転ではなく「トレンド一時的な調整（レンジ入り）」を示しており、結果的に上昇トレンドが継続しています。 この場合、バルジは水色のボックスで示されたトレンドのフェーズの終わりを示しています。 
 ※水色のボックスはインジケーターが描画したものではありません。 
また、他のテクニカル分析と同様に、これらのセットアップは必ず新しいトレンドの発生やトレンド転換を保証するものではありません。トレーダーは他の要素も考慮し、慎重に意思決定する必要があります。 🟠 価格とボリンジャーバンドの位置関係を確認する:
 %Bを利用すれば、価格がバンドのどこに位置しているかを簡単に把握できます。
%Bが1に近ければ価格はアッパーバンド付近、0に近ければロワーバンド付近にあります。 🟠 アラートを設定する:
 バンドウィズが一定期間の最高値または最安値に到達した際にアラートを設定することで、ブレイクアウトやトレンド終了、反転の可能性に備えることができます。 🟠 他のツールと組み合わせる:
 このインジケーターは、プライスアクション、トレンド分析、環境認識などと組み合わせて活用すると最も効果的です。
Pine Script® indicator
by FX365_Thailand
自定义均线（多色 & 分级线宽）Title: Multi-Color Moving Average Suite (MA5…MA4320) — Pine v6 Summary (1–2 lines): An overlay indicator that plots a full ladder of SMA lines from MA5 up to MA4320. Each MA has a unique color, and line width scales with period (short = thin, mid = medium, long = thick) to make trend structure easy to read at a glance. What it does • Plots 16 simple moving averages: 5, 10, 20, 30, 60, 120, 160, 240, 480, 720, 960, 1440, 1750, 2880, 4320. • Distinct colors for every MA to avoid confusion when lines cluster. • Period-based thickness: • Short-term (<60) = thin, • Mid-term (60–160) = medium, • Long-term (≥240) = thick (capped; no unlimited growth). • Designed for quick trend reading across intraday to multi-year cycles (especially useful for 24/7 markets like crypto). How to use 1. Add the indicator to any chart (works on all symbols/timeframes). 2. Use the thin/medium/thick visual hierarchy to identify short-/mid-/long-term bias and crossovers. 3. On very low timeframes, consider hiding some ultra-long MAs if your chart has insufficient history. Notes • Built with Pine Script v6; uses ta.sma(close, length) only (no repainting). • Very long MAs (e.g., 2880/4320) require enough bars; they will display na until sufficient history loads. • No inputs/alerts by default—kept intentionally simple for clarity. (Easy to extend with toggles, custom colors, EMA/WMA options, alerts, etc.) Credits Author: TraderFinsher (customized multi-MA visualization with color and thickness hierarchy). ⸻ 标题： 多色均线系统（MA5…MA4320）— Pine v6 摘要（1–2 句）： 这是一个叠加在价格上的 SMA 均线组，从 MA5 到 MA4320。为每条均线设置了 独立颜色，并按 周期长度分级线宽（短=细、中=中等、长=较粗），让趋势结构一眼可读。 功能说明 • 绘制 16 条简单移动平均线：5、10、20、30、60、120、160、240、480、720、960、1440、1750、2880、4320。 • 全部不同颜色，避免密集时混淆。 • 线宽随周期分级： • 短期（<60）= 细， • 中期（60–160）= 中等， • 长期（≥240）= 粗（封顶，不再无限加粗）。 • 适合从日内到多年周期的 趋势快速判读（对加密等 24/7 市场尤为友好）。 使用建议 1. 将指标添加到任意品种/周期。 2. 结合细/中/粗的视觉层级，判断短/中/长趋势与均线交叉。 3. 在较低周期下，如果历史数据不足，可隐藏部分超长均线。 注意事项 • 使用 Pine v6，仅调用 ta.sma(close, length)，不重绘。 • 超长均线需要足够历史数据，未满足前会显示 na。 • 默认不含参数和告警，追求简洁清晰（后续可扩展开关、自定义颜色/线宽、EMA/WMA 选项与告警等）。 致谢 作者：TraderFinsher（基于颜色与线宽层级的多均线可视化）。
Pine Script® indicator
by xiaocaishen702
Gap ZonesThis TradingView indicator automatically detects daily price gaps and plots them clearly on any timeframe (intraday or daily). It helps visualize where unfilled gaps are sitting, track whether they’ve been filled, and control how far the zone extends. Key Features 1. Daily Gap Detection • Works even when you’re on intraday charts (uses daily OHLC data). • Marks both gap up (potential support zones) and gap down (potential resistance zones). 2. Shaded Gap Zones • Each gap is highlighted as a band (greenish for up, reddish for down). • Option to turn shading off if you just want horizontal lines. 3. Hide When Filled • Once price closes or touches the far side of the gap, it disappears (configurable: Touch vs Close). 4. Lookback Window • Gaps only show if they occurred within the past X trading days (default: 30). • Prevents your chart from being cluttered with ancient gaps. 5. Multiple Gaps Tracked • Can track up to 5 recent gaps simultaneously. • Oldest gaps “roll off” as new ones form. 6. Finite Right-Edge Guides • Optional horizontal guide lines extend to the right, but only for a fixed number of bars (default: 50). • Cleaner than infinite extensions. 7. Gap-Day Marker • Optional vertical line drawn on the bar where the gap first occurred. ⸻ ⚙️ Inputs & Settings When you apply the indicator, you’ll see these options: • Lookback (trading days): How far back to scan for gaps (default 30). • Max gaps to show (1..5): How many simultaneous gap zones to display. • Min gap size (% of prior close): Filter out tiny gaps (default 0.25%). • Hide gaps once filled: Removes a gap from the chart once filled. • Fill rule uses CLOSE (off = Touch): • Touch = filled when price trades through the level intraday. • Close = filled only when a candle close crosses it. • Show shading: Toggle zone fills on/off. • Show vertical marker on gap day: Toggle gap-day marker line. • Show finite right-edge lines: Toggle horizontal lines extending right. • Right line length (bars): How far those lines extend (default 50 bars). ⸻ 🟢 How to Use It 1. Apply on Any Chart • Works best on daily or intraday (5m, 15m, 1h). • Gaps are always calculated from daily data, so intraday charts will show higher-timeframe gaps correctly. 2. Interpret Colors • Green shading = Gap Up (often acts as support). • Red shading = Gap Down (often acts as resistance). 3. Watch for Fills • When price re-enters the gap zone, the indicator checks if it’s “filled” (based on your Touch/Close setting). • If “Hide When Filled” is on, the zone vanishes. 4. Trade Context • Many traders use gaps as targets (expecting a fill) or levels of support/resistance. • Combined with your bull put/bear call spread strategies, it helps confirm strong levels.
Pine Script® indicator
by gtotten10
1