Get started

Search in scripts for "fib"

Fibonacci Indicator ⓙAutomatic Daily Fibonacci (by JustUncle) upgraded. This update is a correction on the way the Fib Zero line is calculated. Previously it was just based on the source of the previous day, which is Ok as long as the Fiblength was set to 2. The new version calculates the Fib Zero from the average of the specified source over the Fiblength, so if Fiblength is now something other than 2 the Fibonacci Zero and other support and resistant levels should calculate correctly.
Pine Script® indicator
by new0122
EdgeAnalysisGroup: Yume Wave 2.0This is a upgraded version of the wave with modified parameters for a higher success rate. 3 New Lengths and 75 more lines of code added to the overall algorithm. Also included are 2 sublevel signals based on the Fib MA and pattern trading. The Wave: + The Yume is the Fast length + The Akume is the Slow length + The Miaku is a median weighted length + The Upper Limit is an overbought asset indication + The Lower Limit is an oversold asset indication + The Wave is the spread between Yume and Miaku Bullish Indications: + The Yume is above the Akume + The Yume is above the Miaku + The Yume is below the Lower Limit Bearish Indications: + The Yume is below the Akume + The Yume is below the Miaku + The Yume is above the Upper Limit Signal Strength Weights: + 50 = Yume Wave crossed a Limit Line + 100 = Yume Wave crossed a Limit Line + Close to a Fib Moving Average + 100 = Edge's Market Bottom/Top Algorithm is marked 'True' Setting up Signals (Based on a 100 Signal Height): + Set the "Bull Signal" to be at 50 or 100 + Set the "Bear Signal" to be at 50 or 100 + 50 is Agressive, 100 is Conservative. + Bull/Bear are separate so you can play conservative bull with aggressive bear.
Pine Script® indicator
by TheKujiras
37
Vegas Tunnel V1.0Step 1: Create a 1 hour chart on whatever currency pairs interest. I personally use MT4 platform on Oanda to follow my trades. Overlay 3 time periods: 169 EMA, 144 EMA and a 12 period EMA ( all 1 hour.) The 144 and 169 EMA’s create the tunnel. The 12 EMA is the filter and crossover indicator. Step 2. Fibonacci numbers are very crucial to trading with the tunnel especially 55,89,144, 233, and 377. Step 3. Wait for the market to come into the tunnel “area”. When it breaks above the upper tunnel boundary, you go long. When it breaks below the lower tunnel boundary you go short. Step 4. Stops and reverses are placed on the other side of the tunnel. Step 5. As the market trades in your direction, you take partial profits at the successive Fib numbers. The final portion of your position is left on until one of the following conditions occur: 1) market hits the last Fib number 377 pips from the EMA’s or 2) the market eventually comes back to the tunnel and violates the other side. Vegas used the following moving averages, as filters: 5-period Simple Moving Average (SMA) 12-period Exponential Moving Average (EMA) 21-period Exponential Moving Average (EMA)
Pine Script® indicator
by UnknownUnicorn2021035
NGRN BALANCE ALLOCATION INDICATOR v1NGRN BALANCE ALLOCATION INDICATOR - Version 1 Overview This indicator can be used to determine trade quantities as the market ebb and flows. Deeper red histogram values would indicate more funds allocated to the buy/long condition, and higher green histogram values would indicate a larger percentage of funds to sell or short. Uses volume weighted moving average as the basis for Fibonacci bands where candle crosses/touches are measured. Features Length indicator to control period of time to evaluate VWMA basis Option to use open, close, high, low, hl2, hlc3, ohlc3 as source for VWMA Option to option to specify the type of contact on fib bands Option to specify the multiplier for the fib bands Clean/Simple UI - Facilitating ease of use. Access Access to use is FREE however the source code is protected .
Pine Script® indicator
by mnigirn118
7
Fibonacci+MA+RSI indicator v2Buy Signal: Black traingle upward Sell Signal: Black traingle downward Works best on 15min chart. Performance numbers are really good for indices.( Need to change timeframe and values to work for forex or CFDs). This script generates the fibonacci bars on the fly based on the length of previous candles(user input available). (1,0.618,0.5,0.382,0 levels are used). Buy or sell signals are generated only when: the price nears specific fibonacci levels and if RSI is favorable and if moving averages are favorable Almost all the options are user customizable. Default settings are the ones with most profitable %. Risk points : Number of points to use as stop loss Contracts, Lots : Order Quantity. RR Ratio : Risk to Reward Ratio for order limit and stop levels. RSI High and Low: Used in conjunction with Fib levels and Moving averages ( sma used)(To prevent a buy when RSI is overbought and vice versa) use MA : To usemoving averages for signal generation. Lengths for short,medium and long term MAs are customizable Fib length : Number of hours to consider. Internally this is multiplied by 4 to generate signals for 15min charts. ATR % : % of ATR to consider when price is in proximity (For example fibLevel+atr% and fibLevel-atr% are considered when looking for a crossover with price). Set to minimum to ignore this. FollowReversal : Enabling will wait for 1 confirmation candle to generate the signal. Tested on Nifty -0.19% , Dow , S&P 0.20% etc. indices. Please let me know if you have further questions and suggestions. I am learning to script, any help would be really appreciated. May make the script public once I am happy with the performance.
Pine Script® indicator
by rjv17
7
Fibonacci Retracement (S)-Silver The Automatic Fib Retracement - Silver -0.24% script indicates the 50-61.8% pullback region. The lines of the upper and lower pivots, the support and resistance areas are also highlighted. Customisable Fib Length - Time period over which max and min pivots are chosen. Offsetfib - Automatically offsets the pivots and sell zone as your entry position will be some time after the upper and lower pivots are set. Works well when used in combination with an oscillator which highlights Divergence. A strategy based off buying the 50-618 with a defined stop loss and target can be the basis of your strategy. This tool will automatically plot those points but a defined Risk Management strategy will always be needed. Works best in Bearish trends but will work on all timeframes (Bearish correction in an uptrend also possible). Previous pivots shown but be careful to identify which of the several pivots you are using. Start at a larger timeframe and move down. (Entries consistent on several timeframes are golden) Pivots and retracements are dynamic. Be sure to note your entry and targets.
Pine Script® indicator
by crypto_0sam0
12
Multiple Moving AverageThis EMA script has multiple EMA's in one - 4 at the key Fibonacci levels (8,13,21,55) and 2 additional at 100 & 200 period counts. I've found this script to be extremely helpful to determine when to open or close positions - mostly using the 55 EMA as they key indicator and watching for the other 3 Fib MA's to cross over the 55 as a signal of a market shift. The 100 & 200 give additional Support & Resistance indications. The FIB MA's (hard to see on above chart) work better at lower levels for day trading where as the larger 3 lines work at all intervals.
Pine Script® indicator
by Budshoot69
RSX FracticalityA little project I was working on to avoid studying for finals. Using LazyBear's RSX code for a smoother RSI, then taking the RSX of fib number lengths. Take the average of that, then the JMA of that from the same fib numbers. The average of that is then treated as the trend, take the average of the trend values from the main time frames, the script calls pretty far back so adding a W or M TF I think would throw the calculations off. Then I smoothed that value using the jma's to create the overall trend. I got the idea from Ehler's Empirical Mode Decomposition about identifying peaks and valleys and creating an average of that to create a range. The idea is that if the trend is above the Average Peak then it is a bull trend, less than the average valley it's a bear trend, in between it's ranging. It looks like it turned out alright, I'll be working on this idea of fractals a lot this summer to see if I can improve it or build something better off of the idea.
Pine Script® indicator
by wpatte15
3
Fibonacci Commodity Stenth IndexFibonacci Commodity Strength Value tells us about the strength and weakness of bull or bear market. The main focus in this is too be done at reversal. It can also be used for identifying fake ups/downs. If all the 4 lines moves upward after a huge up spike, then notice the values of all 4 values. If red fib is smaller than green fib then it is a fake trend. If its more then its uptrend and same for bear movement. ;) It also represents cci (in terms of values) and rsi (in terms of waves). Enjoy !!!!!
Pine Script® indicator
by LensOfChartist
5
Automatic Daily Fibonacci v0.3 by JustUncleLThis update is a correction on the way the Fib Zero line is calculated. Previously it was just based on the source of the previous day, which is Ok as long as the Fiblength was set to 2. The new version calculates the Fib Zero from the average of the specified source over the Fiblength, so if Fiblength is now something other than 2 the Fibonacci Zero and other support and resistant levels should calculate correctly.
Pine Script® indicator
by JustUncleL
13
Indicators: 6 RSI variationsAs we all know, as published by Wilder, RSI makes use of "CLOSE" values. You probably have experimented changing the input to hl2 or hlc3 . I have included many other RSI variations in this chart. Refer to the developers section below to learn how you can use this code in your scripts. 1) RSI with Volume --------------------------------------------- Suggested by Morris, this idea adds volume to the RSI indicator. Because volume offers one means of determining whether money is entering or leaving a market, this would provide additional information with which to make trading decisions. 2) RSI using last Open --------------------------------------------- This is RSI with yesterday's open, This basically compares two full days of price action and in the process produces a smoother RSI line. RSI of today's close is used as a signal (blue line). 3) RSI using SMA --------------------------------------------- Wilder used his own MA for calculating RSI (check my post on Wilders MA here - -- This closely resembles EMA). One of Morris's suggestion is to try out SMA. Compared to normal RSI, you will see more squiggles here. 4) RSI using EMA --------------------------------------------- Same idea as above, but using EMA. 5) RSI with Fibs --------------------------------------------- How much does RSI retrace? This makes it easy to determine that :) 6) RSI of MACD --------------------------------------------- As I mentioned earlier, RSI is a pluggable formula. You can substitute "close" with any data series to derive an index out of it. This shows RSI of MACD. Note that this is range bound. More info on RSI variations: drive.google.com For Pinescript developers: --------------------------------------------- You can substitute your favorite indicator in the RSI function. I have made the RSI calculation a separate function in all the indicators above. Following are the reusable functions (simply copy to your script and call with proper arguments): * WiMA(src, length) * calc_rsi(fv, length): This is equivalent to stock rsi() in TV. * calc_rsi_volume(fv, length) * calc_rsi_sma(fv, length) * calc_rsi_ema(fv, length) * calc_rsi_lastopen(fv, length) * calc_macd(src, fast, slow) You can also pick up fibs drawing code and put in on any indicator.
Pine Script® indicator
by LazyBear
16
Altcoins Exit Planner [SwissAlgo]Altcoins Exit Planner Navigating Altcoin Exits: A Strategic Approach: Planning your exits before emotions take over ------------------------------------------------------------------ ✅ THE PSYCHOLOGY OF ALTCOIN TRADING Many traders face recurring challenges when managing altcoin positions: The Greed Trap : Holding through euphoric rallies, hoping for unrealistic targets, only to watch gains evaporate during market reversals. The Paralysis Problem : Sitting on large unrealized profits but unsure which assets to exit, when, or how much — leading to inaction. The FOMO Cycle : Rotating into trending coins too early or too late, often abandoning solid positions prematurely. Analysis Overload : Consuming endless opinions and indicators without ever forming a clear, actionable exit strategy. These patterns often stem from a lack of structure and planning . Emotional decision-making in volatile markets can be costly — especially with altcoins. Developing a systematic framework can help define exit levels in advance , aiming to reduce emotional bias and improve decision clarity. The goal is to build disciplined exit strategies based on predefined logic rather than reactive impulses. ------------------------------------------------------------------ ✅ FEATURES & FUNCTIONALITY This indicator is designed to provide traders with a structured framework for exit planning. It aims to reduce decision-making under pressure by offering a visual roadmap on the chart. The tool provides an analysis of key data points, including: Structured Analysis : The indicator evaluates asset strength, identifies potential market phases, and derives potential exit levels from historical price behavior. This analysis may help traders assess whether an asset shows characteristics of strength (e.g., potential for extended targets) or weakness (e.g., early exit signals). Actionable Information : It generates specific price levels and quantities for consideration as part of a predefined exit strategy. Proactive Alerts : The system includes configurable alerts that can notify users as prices approach these key levels, allowing time for preparation. This feature is intended to support a shift from reactive trading toward systematic, criteria-based exit planning. ------------------------------------------------------------------ ✅ HOW IT WORKS - AUTOMATED ANALYSIS & PLANNING This indicator is designed to automate key aspects of exit planning that would otherwise require manual effort: Fibonacci Level Calculation & Plotting : Automatically identifies key historical cycle points (e.g., bear market lows, bull market highs, recent pullbacks) and calculates relevant Fibonacci levels (both "Fib Retracments" from previous cycle ATH to bear market bottom, and "Fib. extensions" - considering major price impulses/waves in current bull market). This may help reduce manual drawing errors and streamline target identification. Automated Calculation and Plotting of "Fib. Retracement "Levels (from ATH of previous cycle to bottom in bear market) Fibonacci retracement levels are a popular tool used in technical analysis to identify potential support and resistance levels in a market. After a significant price move, traders look for the price to "retrace" or pull back to one of several key Fibonacci ratios of the original move before continuing in its original direction. The most common retracement levels are 23.6%, 38.2%, 50%, 61.8%, and 78.6%. These levels are static horizontal lines on a chart, and their predictive power is based on the idea that they are "areas of interest" where a trend might pause or reverse. Automated Calculation and Plotting of "Fib. Extension" Levels (Price Impulses/Waves within current Bull Market) Fibonacci extension levels are used to identify potential price targets or profit zones once a market has moved past its previous high or low. Unlike retracements, which measure a pullback, extensions project how far a trend might continue in the direction of its impulse move. They are typically used to anticipate where a wave or a rally might end and are based on ratios like 127.2%, 161.8%, 261.8%, and sometimes even higher. Extensions are a key tool for traders looking to set price targets for taking profits. Coin Strength Assessment: Evaluates recovery performance relative to previous cycle peaks and classifies assets into four categories (Weak, Average, Strong, Outlier). Strength ratings may adjust dynamically based on momentum conditions — all derived from price data. Market Phase Detection : Continuously monitors trend indicators, volume behavior, and altseason dynamics to estimate the current market phase. This may assist in contextualizing exit decisions without requiring manual phase analysis. Exit Level Generation : Based on the asset’s strength classification and selected strategy (Conservative, Balanced, Aggressive), the system generates sequential exit levels with suggested percentages and quantities. Designed to support structured planning across three stages. Signal Detection : Tracks multiple conditions — including price extensions, volume surges, momentum shifts, and cycle patterns — to generate alerts when predefined criteria are met. Emergency Exit Detection : Scans for rare but high-risk scenarios (e.g., cycle top formations with multiple confluences) that may warrant immediate attention. Alerts are designed to highlight potential overextension during volatile phases. Transfer Alerts : Calculates proximity to key exit zones and may issue early warnings to prepare for execution (e.g., moving assets from cold storage to exchanges), aiming to reduce last-minute decision pressure. The script operates in two distinct modes: Coin Analysis Mode Displays automatically-calculated Fibonacci levels, asset strength classification, market phase estimation, and contextual risk factors — designed to support structured analysis. Exit Plan Mode Generates a customizable exit strategy with calculated price levels, suggested quantities, and potential outcome scenarios — aiming to assist with disciplined planning and reduce emotional bias. ------------------------------------------------------------------ ✅ SETUP & INSTALLATION Step 1: Chart Setup Add the indicator to your altcoin USD chart (e.g., spot market pairs). Recommended timeframe: 3 days for signal clarity. Dark theme suggested for visual contrast. Step 2: Configure Your Exit Strategy Open Settings → “Setup Your Exit Plan” Choose your strategy: Conservative: Prioritizes earlier exits for stricter risk control; Balanced: Combines early and late exits for a mixed approach; Aggressive: Targets later exits, accepting potentially higher volatility. Input your asset quantity. (Optional) Set a minimum sell price to block exit signals below your defined threshold. (Optional) Set a sell-now price to trigger a sell alert when your exit target is reached, bypassing intermediate levels. Step 3: Choose Display Mode Coin Analysis Mode: View market conditions, strength classification, Fibonacci levels, and contextual risk insights. Designed to support monitoring and signal validation. Exit Plan Mode: Displays your structured exit roadmap with suggested price levels, quantities, and visual chart overlays. Focuses on execution and planning. Step 4: Set Up Alerts (Recommended) Click the “Alert” button on the chart. Select “Altcoins Exit Planner” as the condition. Choose alert type: Planned Exit, Emergency Exit, Transfer Alert, Local Top, Trend Change Set expiration to “Open-ended” Configure your preferred notification method. Alert Types Include: Planned Exit Alerts: Triggered when suggested exit levels are reached (Exit #1, #2, #3). Emergency Exit Alerts: Highlight potential cycle tops or full-exit conditions. Transfer Alerts: Advance notice to prepare for execution (e.g., moving assets to exchanges). Local Top Alerts: Short-term pullback signals for tactical decisions. Trend Change Alerts: Indicate potential market phase transitions. Once configured, the indicator begins analyzing and may notify you when exit conditions align with your selected strategy. ------------------------------------------------------------------ ✅ USER INTERFACE The interface is organized into two primary modes: 1) Coin Analysis Mode Analysis Table Includes: Fibonacci levels with price targets and percentage differentials Market trend status (e.g., Strong Bull, Weakening Bull, Bear Market) Volume behavior (Normal / Abnormal) Price extension status (Overextended / Within range) Altseason detection Coin strength classification Reversal risk assessment (Low / Average / High) Suggested action based on current conditions Visual Elements: Bull/Bear trend EMA line Volume-based candle coloring (overrides default chart candles) Pivot points for key structural levels Selectable Fibonacci extension/retracement lines Background highlighting during altseason periods (potential cycle peak phase) 2) Exit Plan Mode Exit Plan Table Displays: Suggested quantity to sell at each exit level Estimated portfolio value in USD Structured exit plan with Fibonacci levels, percentages, quantities, and projected amounts Average exit price calculation Potential outcome scenarios if all exit levels are reached Price Lines: Individual exit level markers with contextual details Average exit price reference line Minimum sell price line (if enabled) Sell-now price line (if enabled) Signal Indicators: Blue diamonds: Planned exit levels reached Red triangles: Cycle top warnings Orange triangles: Local top signals These elements are designed to assist with visual interpretation and structured decision-making. All outputs are derived from price data and user-defined settings. ------------------------------------------------------------------ ✅ LIMITATIONS Market Cycle Dependency: This indicator is designed for cryptocurrency market cycles and will not perform similarly in other asset classes or market conditions. Its logic is based on historical crypto behavior, which may not repeat. Assumption-Based Framework: The methodology relies on assumptions about market cycles, Fibonacci relationships, and altcoin behavior patterns. These assumptions may not hold under future conditions. User Responsibility All signals require user interpretation and decision-making. The indicator provides information, not investment advice. Signals should be validated with additional analysis. Position sizing and risk management remain the user's responsibility. Technical Requirements Intended for use on the 3-day timeframe. Designed for altcoin/USD trading pairs. Requires sufficient historical data for Fibonacci calculations. May not function properly on newly listed assets with limited price history. Risk Management Guidelines. Recommended practices include: Use with limited portions of your portfolio. Combine with other technical and fundamental tools. Consider broader market context beyond indicator signals. Maintain independent stop-loss levels. Review and adjust settings as market conditions evolve. Signal Interpretation Emergency signals highlight conditions that may warrant immediate review. Planned exits support gradual, structured position reduction. Transfer alerts provide preparation time before potential execution. Local top signals may assist short-term tactical decisions. ------------------------------------------------------------------ ✅ DISCLAIMER This indicator is for educational and informational purposes only . It does not constitute financial, investment, or trading advice. The indicator: Makes no guarantees about future market performance. Cannot predict market movements with certainty. May generate false signals or miss key developments. Relies on historical patterns that may not repeat. Should not be used as the sole basis for trading decisions. Users are responsible for: Conducting independent research and analysis. Understanding the risks of cryptocurrency trading. Making their own investment/divestment decisions. Managing position sizes and risk exposure appropriately. Cryptocurrency trading involves substantial risk and may not be suitable for all investors. Past performance does not guarantee future results. Users should only invest what they can afford to lose and consult qualified professionals before making financial decisions. The indicator’s assumptions may be invalidated by changing market conditions. By using this tool, users acknowledge these limitations and accept full responsibility for their trading decisions.
Pine Script® indicator
by SwissAlgo
Gabriel's Triple Impulsive Candle DetectorTriple Impulsive Candle Detector Overview, critical for catching impulse moves in either direction. SPX Income System is a rule-based framework designed to identify frequent, high-probability income opportunities on the S&P 500 cash index (SPX/SPY) using 0-DTE credit spreads. The core engine operates on 30-minute Impulse bars during the morning trade window and can be extended with optional modules for afternoon, overnight, and weekly swing opportunities. The methodology centers on a single, mechanical price event called a Impulse Bar (small wick to body ratio) to minimize discretion and keep execution consistent. 🔶What’s Inside Core Strategy: SPX Daily Income Timeframe: 3 kinds of 30-min bars. Window: 09:30–11:30 ET (new setups only) Instrument: SPX (cash index, XSP/SPY), executed with $5-wide credit spreads on 0-DTE SPX options Bullish Setup Entry on the break of setup bar high Use an at the money put credit spread Bearish Setup Entry on the break of setup bar low Use an at the money call credit spread Intent: Enter shortly after setup; manage to >80% max profit or EOD expiration if SPX. If it's another stock, then a 1.5~2x D ATR is suggested. Signal: An Impulse Bar that closes at/near the high (bullish) or low (bearish) of its 30-min range, verified with Volume above average. Risk—limited to the risk of the option spread. The spread is 5 dollars wide The premium collected is $2.50 $5 - 2.50 = $2.50, or the breakeven point. Which means what's left is the risk involved. The risk is $2.50 per spread 🔶Why the 30-Minute Chart? The 30-minute bar is the “chart of choice” because it filters noise and aligns with morning institutional flows. On alternate timeframes, price often retraces half the candle body before following through. On the 30m: the follow-through is more consistent, especially with 2x volume confirmation. Adding support/resistance levels at the impulse bar hl2 strengthens execution. This strategy has roots in MTF Crypto, and SPX/SPY TPO-Order Block logic. 🔶Bonus Examples: 🔹Afternoon SPX Income Second chance window (typically 14:00–15:00 ET) if the morning trade has exited, 60-min bars instead. 🔹ORB 30 – Opening Range Break (first 30 min) Classic ORB with an income twist for early action when time is limited. This can be entered on the 15 minute candle break. 🔹ORB 60 – Opening Range Break (second 30 min) A follow-up ORB variant for traders who miss the first window, verified on a 60-min chart. Enter on the final 3 minutes of the hourly candle or wait for a pullback. 🔹B&B – Bed & Breakfast (Overnight) Identifies income setups via the 10-minute chart in the last 30–60 minutes of the session with next-day open as the exit. 🔹JB – Just Breakfast Uses the prior day’s end-of-day setup to enter at the opening bell, then manages into the daily income flow. I trade 0-date, and selling an ITM spread either partially or fully then gives me a head start on the daily income potential. This may work better if you either roll or the ORB 30 also meets the criteria. 🔹All-Day-Scalper Converts income logic into 30-minute scalps using deep 75/80 delta ITM options as synthetic stock (requires >PDT). Meaning that the option will behave as if it is stock. This strategy comes with a warning: it's better if you can day trade. 🔹Tag ’n Turn—Weekly SPX Income Swing Weekly swing overlay using 30-min Pulse Bars + Bollinger Bands (50) for 3–7 day swings and as a filter for daily income alignment. I use the TTM Squeeze and obtain similar results. Target heuristics (directional days) with a fired squeeze. Part of my Gamma Scalping System. 🔶The Impulse Bar (10~40% Wick to Body Bar) An Impulse Bar is a candle that: Bullish: Closes higher than it opens and within the top ~10% of its high-low range. Bearish: Closes lower than it opens and within the bottom ~10% of its high-low range. Practical tip: Many traders mark 0-10-80-100% levels on the candle range (custom Fib or ruler) to quickly validate Pulse Bars. If it's accompanied by a volume spike, then it's better quality. 🔶SPX Daily Income—Rules & Execution 🔹Rules Chart: 30 min, no indicators required. Pure PA, TPO-based strategy. New Setups: 09:30–11:30 ET Instrument: SPX signals, executed via SPX 0-DTE credit spreads ($5 wide, $2 for SPY) 🔹Entries Bullish: Enter on a break of the setup bar high, use ATM put credit spread Bearish: Enter on a break of the setup bar low, use ATM call credit spread 🔹Exits Primary: Close at >80% of max profit (credit received) Alternate: Hold to EOD expiration Stop: Risk of the spread (defined by width – credit) Target Heuristics (directional days) Optional: 1.5–2× ATR as a reference (mirrors directional follow-through that often accelerates the >80% outcome) Credit Guidance (typical) OTM short strike ≈ $2.40 ITM short strike ≈ $2.50–$2.80 2× ITM short strike ≈ $2.80–$3.00 Trade Management (PDT-Aware) If under PDT, many prefer set-and-forget with GTC buy-back (e.g., $0.20) or EOD expiration. 1:00 PM ET time check Trending day ±$15–$20 SPX: usually no action, run to expiration Non-trending day ±$5 SPX: consider taking 40–60% if available (optional) to avoid 50/50 end-of-day decay dynamics Rationale: Without a favorable trend by ~1 PM, the odds of a late push decline; choosing a controlled partial outcome can improve long-run expectancy and reduce variance. 🔶Examples (Conceptual) 🔹Bullish: A green dot marks a bullish impulse bar; minor follow-through pushes the spread to >80% quickly. 🔹Bearish: A red triangle marks a bearish Impulse Bar; a modest down move is often sufficient for >80–95%. 🔹Tag ’n Turn—Weekly Swing (Filter & Stand-Alone) Chart: 30-minute Overlay: Bollinger Bands 50 (mean-reversion lens), or KC or TTM. Setup: Tag of upper/lower band + Pulse Bar, enter on break of Pulse Bar in that direction Target: Opposite Bollinger Band Use Case: 3–7 day swings and a directional filter for Daily Income signals (trade with weekly bias) 🔹Afternoon SPX Income: Same Pulse logic, 14:00–15:00 ET window. 🔹ORB 30 / ORB 60: Uses 30/60-min opening range; can relax Pulse threshold (up to 40% bars) for early positioning when time-constrained. 🔹B&B (Overnight): Lasts 30–60 minutes; closes the next day at open or after the first 30-minute bar. 🔹JB (Just Breakfast): Enter at open using prior day’s signal; optionally roll into Daily Income if eligible. 🔹All-Day-Scalper: Deep ITM options (~0.75–0.80 delta) as synthetic stock. Entry: Long ITM option Stop: ~40% of option price Target: 70–150% or 30-minute timed exit Note: Time-intensive; for accounts above PDT. 🔹Brokerage: Must efficiently support SPX options; a <10% spread between OI and Volume is ideal. Preferences vary; Tastytrade, Thinkorswim, and Interactive Brokers are common choices. Use what’s reliable, available in your region, and cost-effective. 🔶Alerts (Check-in) Bullish Impulse Detected (within 09:30–11:30 ET) Bearish Impulse Detected (within 09:30–11:30 ET) Afternoon Pulse (14:00–15:00 ET) ORB 30/60 Trigger B&B Window Open (last 60 mins) JB at Open Tag ’n Turn: Band Tag + Impulse (Bull/Bear) 🔶Inputs (Typical) Session windows (morning, afternoon, last hour) ~5~15 Average Bar Impulse threshold (strict 10% vs relaxed up to 40% for ORB variants) Marker/label styles (bull/bear colors, dots vs arrows) Filters (optional ATR TP, band touch BB(50-SMA, 2 Stdv.) for Tag ’n Turn) Alert toggles (on-close for webhooks) 🔶Best Practices One playbook, many Doors: Start with daily income; add afternoon or B&B/JB only after you’re consistent. Credit discipline: Don’t chase poor pricing; stick to the credit guidance. Time awareness: If no trend by ~1 PM ET, consider variance control. Weekly bias: When using Tag ’n Turn, align daily trades with the weekly swing direction for added confluence. Risk is defined as width – credit = max risk per spread. Size, accordingly, 1~2%. 🔶Disclosures & Risk This is not financial advice. Options involve risk and are not suitable for all investors. Past performance (including backtests or theoretical studies) does not guarantee future results. Slippage, fills, assignment risk, and latency can materially impact outcomes. Trade a plan you fully understand and always size for durability. On the Daily, the Impulse bars, are often a signal that you should plan for it to return back to half of the Candle's body, and plan accordingly. Plot a horizontal support/resistance level and see how price reacts to it. Keep house-money, and use 1~2% Risk, reduce exposure when VIX is low and increase it when VIX is high. TL;DR (Summary) Signal: 30-min Pulse Bar (strict 10% close in range) Window: 09:30–11:30 ET (new setups) Execution: 0-DTE $5-wide SPX credit spreads Exit: >80% max profit or EOD Add-ons: Afternoon, ORB 30/60, B&B/JB overnights, All-Day-Scalper, Tag ’n Turn weekly swing/filter Philosophy: Fully rule-based, minimal discretion, production-line consistency 0-date.
Pine Script® indicator
by GabrielAmadeusLau
1
Otekura Range Trade Algorithm [Tradebuddies]The Range Trade Algorithm calculates the levels for Monday. On the chart you will see that the Monday levels will be marked as 1 0 -1. The M High level calculates Monday's high close and plots it on the screen. M Low calculates the low close of Monday and plots it on the screen. The coloured lines on the screen are the points of the range levels formulated with fibonacci values. The indicator has its own Value table. The prices of the levels are written. Potential Range breakout targets tell prices at points matching the fibonacci values. These are Take profit or reversal points. Buy and Sell indicators are determined by the range breakout. Users can set an alarm on the indicator and receive direct notification with their targets when a new range occurs. Fib values are multiplied by range values and create an average target according to the price situation. These values represent an area. Breakdown targets show that the target is targeted until the area.
Pine Script® indicator
by akaAsakura1907
AriVestHub_SMCIntroduction to the AriVestHub_SMC Indicator: The AriVestHub_SMC indicator is designed and coded based on Smart Money Concepts (SMC). This tool has unique features that you won’t find in any other indicator built around SMC. I’ve been active in the crypto market since 2019, and besides using the SMC strategy, I also apply several custom strategies in my trading. Personalized versions of these strategies will gradually be shared with you as well. The main reason for developing this indicator was the gap in existing tools. Many times, setups like Valid Pullback or Inside Bar Candles appear on the chart but are not easily recognizable at first glance, and therefore they get ignored. This often leads to mistakes in Market Structure Mapping right from the beginning, which then causes errors in further analysis and predictions. Since the SMC strategy is entirely built on market structure, any mistake in identifying its key components basically destroys the reliability of the analysis. Unlike similar indicators that mostly just draw nice lines and zones on the chart for promotional purposes, AriVestHub_SMC aims to show the reality of the market, not beautify it. Price behavior is the result of trader psychology and the clash of different views—it doesn’t have to look neat and pretty all the time. This indicator shows exactly what has happened in the market and the possible scenarios ahead. Once you use this tool and study this guide, you’ll clearly feel the difference compared to other common indicators. My main goal in creating AriVestHub_SMC was to give real help to traders—not just to sell or commercialize it. The AriVestHub_SMC indicator is basically a Market Structure Mapping Engine (SMC Structure Mapping Engine), whose main task is to detect and accurately map market structure movements. ________________________________________ Its key features include: • BOS / CHoCH – Detecting • breakouts and changes in market character • IDM / Pullback – Confirming pivots and valid moves • OF / OB – Marking key supply and demand zones • SMT (Smart Money Trap) – Spotting invalid zones and smart money traps • Liquidity Sweeps / Equal High-Low – Liquidity hunts and reversal setups • Transfer Option – Automatically correcting structure in Single Leg scenarios ________________________________________ Basic Concepts in the AriVestHub_SMC Strategy 1. Inside Bar An Inside Bar is a candle (or group of candles) whose price range falls between the High and Low of the previous candle. In Smart Money and market structure analysis, these candles are usually ignored, and only the main candle is considered. Simply put, an Inside Bar signals market pause and energy buildup—a place where both buyers and sellers are waiting for price to decide its next direction. In the picture, you can see candles highlighted in a different color that fall within the main candle range. They should not be treated as independent candles, and all of them together should be considered as one. ________________________________________ 2. Pullback A pullback happens when price makes a temporary return after a main move. Even a single candle can cause it. In Smart Money, a valid pullback is defined as: • In an uptrend: if the Low of a candle breaks the Low of the previous candle which is not an Inside Bar, a valid pullback occurs. • In a downtrend: if the High of a candle breaks the High of the previous candle which is not an Inside Bar, a valid pullback occurs. Valid pullbacks are the points where the market gathers the energy needed to continue its move. In the image below, both valid and invalid pullbacks are shown. ________________________________________ 3. IDM – Inducement Inducement is one of the most important concepts in AriVestHub_SMC. Without IDM, no structure in Smart Money can form. Every valid pullback can be considered an IDM. There are two types: Major IDM and Minor IDM. Correctly identifying IDM is critical, because the entire market structure is mapped based on it. After each BOS or CHoCH, a new HH or LL pivot is only confirmed if the price returns and touches the IDM. • In an uptrend after BOS: the lowest price of the first valid pullback is the Major IDM, and the last pullback before reaching the Major IDM is the Minor IDM. • In an uptrend after CHoCH: the highest price of the first valid pullback is the Major IDM, and the last pullback before reaching the Major IDM is the Minor IDM. The same rules apply in reverse for downtrends. In this strategy, Major IDM always takes priority. The image shows different types of IDM, and the same applies for downtrends. ________________________________________ 4. BOS – Break of Structure A Break of Structure happens when price breaks its previous High or Low in the direction of the trend: • In an uptrend: if the previous HH is broken, BOS occurs. • In a downtrend: if the previous LL is broken, BOS occurs. BOS confirms continuation of the current market trend. ________________________________________ 5. CHoCH – Change of Character Change of Character occurs when price moves against the previous trend: • In an uptrend: if the previous LL is broken, CHoCH occurs. • In a downtrend: if the previous HH is broken, CHoCH occurs. CHoCH is usually a signal of a trend reversal or a deep market correction. The image shows the overall market structure with BOS and CHoCH. ________________________________________ 6. Order Flow Order Flow zones are formed from valid pullbacks and are usually points where price reacts strongly. They are defined as: • In an uptrend: Last Selling Momentum Before pushing upside • In a downtrend: Last Buying Momentum Before pushing dowside Three main types of Order Flow used in this strategy: • OF: Decisional (Dec) – The first valid OF after IDM, where the market makes its key decision. • OF: Extreme (Ext) – The last valid OF after IDM, acting as the final defense of buyers or sellers. • SMT – Smart Money Trap – All order zones before IDM, and those between Dec and Ext. These usually cause short-term, deceptive reactions and are not valid for trading. In addition: • Unmitigated Order Flow – A zone not yet touched, still a liquidity source. • Mitigated Order Flow – A zone that has been touched, with reduced validity. • Redefine Order Flow – Identifying internal OFs within a main unmitigated OF for more precise entries. The image shows the different types of OF. ________________________________________ 7. H/L Liquidity Sweep A Liquidity Sweep happens when price breaks a previous High or Low with a wick, but the candle body fails to close beyond it. • If the High is broken with a wick but the candle closes below it, a Liquidity Sweep occurs. • If the Low is broken with a wick but the candle closes above it, a Liquidity Sweep occurs. These setups are often signs of trapping traders and starting a move in the opposite direction. In fact, Liquidity Sweep points are among the best trading setups. ________________________________________ 🔑 Final Note All these concepts are like puzzle pieces: Inside Bar, Valid Pullback, IDM, BOS, CHoCH, Order Flow, and Liquidity Sweep. When combined, they create a clear and accurate picture of the market’s real behavior. ________________________________________ Indicator Settings 1. Analyze From … To … • Set the analysis time range. • Another use: In ping-pong structures, you can add another copy of the indicator to the chart, set the starting point at the recent HH or LL, and map the internal structure for counter-trend trading. ________________________________________ 2. Main • Confirm CHoCH with wicks → If enabled, only the wick (not the body) is considered for BOS and CHoCH confirmation. Useful for spotting subtle liquidity-based breaks. • Major / Minor IDM → Choose IDM type. • Consider Inside Bar → Best kept enabled, so candles inside the previous candle are ignored. ________________________________________ 3. Fib Ret • Min pullback retracement % → Set the minimum retracement level. • Helps identify valid pullbacks and gives more confidence in trend continuation. • Meaning: if BOS happens, price must at least retrace by the minimum percentage before expecting the trend to continue. ________________________________________ 4. BOS/CHoCH • Display BOS and CHoCH on the chart with customizable color and style. ________________________________________ 5. IDM • Mark previous IDM : Show past IDMs. • Mark live IDM : Show current active IDM. • Customize IDM display options. ________________________________________ 6. Pivots • Display HH and LL pivots. ________________________________________ 7. Transferring H/L IDM BOS/CHoCH • Transfer in case of lack idmB or idmS → When the move is Single Leg and no valid IDM exists in the recent move, HH, LL, and IDM must be shifted and corrected. This adjusts the market structure. • In case of transferring, remove all previous transferred Market Structure → If enabled, every time HH/LL and IDM need to be shifted, the transfer happens and the market structure is re-analyzed from scratch. • Important: Often after one transfer, another Single Leg appears. This option keeps adjusting structure automatically, while doing it manually would be slow and error-prone. ________________________________________ 8. Order Flow • Display Decisional, Extreme, and Supply/Demand OFs. ________________________________________ 9. H/L Sweeps • Detect Liquidity Sweeps at Highs and Lows. • These are very strong reversal setups. ________________________________________ 10. Equal High/Low • Show equal Highs and Lows where liquidity often accumulates. ________________________________________ 11. Moving Average • Add a moving average as a trend filter. • Option to choose type (SMA/EMA) and length (e.g., 50 or 200). • Usually: o MA50 → For mid-term trends, quick confirmation. o MA200 → For long-term trends, stronger confirmation. ________________________________________ 12. Internal Structure (ZigZag) • Show internal market structure as ZigZag. ________________________________________ 13. Inside Bar Candles • Display Inside Bars in color or with a box. Direct Message: Telegram.com/ArmanAria
Pine Script® indicator
by arman_ariamanesh
VIX Stoch RSI Oscillator [HUD Box + Compression]vix stoch rsi Oscillator watch volatility without switching charts, gives signal based off fib levels 0-100 / volatility, emoji box to show signal, HUD Box: emoji-coded tactical feedback bounce 100 "💥 Expansion" : bounce 0.8 "🔴 Overbought" : bounce 0.618 "📉 Distribution" : bounce 0.5 "🧠 Midline" : bounce 0.382 "📈 Accumulation" : bounce 0.2 "🟢 Oversold" : bounce0.0 "💣 Expansion" : "⚪ Neutral" Tiger EMA/STOCH This logic checks if the oscillator is trending above or below its 48-period EMA, If above, it paints the line GREEN🟢 (bullish), If below, it paints it RED🔴 (bearish), If compression is active, it overrides both with purple🟣 to highlight tactical squeeze conditions, ⚠️WARNING⚠️ ALWAYS REMEMBER THIS CHART IS VIX/USD IN MOST CASES SPY MOVES VICE VERSA I AM NOT RESPOSIBLE FOR YOUR OWN ACTIONS/TRADE IDEAS AMEX:USD TVC:VIX SP:SPX
Pine Script® indicator
by ICETRADESZ
Riz Goldbach FrameworkRiz Goldbach Framework maps a dynamic dealing range and a set of Goldbach-derived price levels to structure intraday decision-making. It blends range math (PO3), level clustering, session weighting, volume/volatility context, and an explainable scoring engine that can issue BUY/SELL signals with risk levels (SL/TP). It is designed for discretionary traders who want rules-based context rather than a black box. Core concepts (how it works) 1) PO3 Dealing-Range Engine ⦁ The script builds a tri-based PO3 range around current price (Auto or Manual). ⦁ It shifts the range when price “accepts” outside (close/wick—user selectable) and adapts width with ATR so the range expands in high volatility and tightens in low volatility. ⦁ From this range it computes mid, premium/discount halves, and sub-mids. 2) Goldbach Levels (structure map) Within the active PO3 range, fixed percentages anchor recurring behaviors: ⦁ Rejection edges: 3%, 97% ⦁ Order-block tendency: 11%, 89% ⦁ FVG tendency: 17%, 83% ⦁ Liquidity void / expansion: 29%, 71% ⦁ Breaker band: 41%, 59% ⦁ Mitigation band: 47%, 53% ⦁ Equilibrium: 50% ⦁ Touch/near logic is tolerance-based (body-only optional). The script also counts confluence clusters (2=moderate, 3+=strong) near price. 3) Market elements the script tracks ⦁ Order Blocks (OB): detected after BOS behavior when price is sitting on OB-biased GB levels (11/89). ⦁ FVG: 3-bar gaps at FVG-biased levels (17/83) with optional “% fill” confirmation. ⦁ LV bars: wide-range, high-range bars around 29/71 for displacement/voids. ⦁ Equal Highs/Lows (EQH/EQL): tolerance with labeling for sweep risk. ⦁ Circuit Breaker (CB): zone seeded at 41/59. States: intact → broken → retest → revalidated/failed. A shaded band shows the active breaker zone. ⦁ Twin Towers (TT): equal-high/equal-low doublet with spacing/volume/RSI checks, then sweep-and-return into the breaker zone for confirmation. 4) Context & filters ⦁ Trend vs Range: DMI/ADX + EMA stack infer TREND/RANGE/TRANSITION and scale the required score. ⦁ MTF alignment: compares current PO3 halves vs HTF PO3 halves (user timeframe), rewarding alignment and flagging divergence. ⦁ Fib–Goldbach confluence: checks 61.8/38.2/78.6/127.2/161.8 against key GB levels for added weight. ⦁ Session weighting: Asia/London/NY bias different GB levels; weights are higher for London/NY. ⦁ Volume-weighted liquidity: tracks volume at EQH/EQL to flag “high-commitment” sweeps. ⦁ AMD cycle (smart): accumulation/manipulation/distribution estimated from ATR regimes, sweeps, BOS continuation, divergence and PO3 shifts. ⦁ Optional filters: HTF bias, SMT divergence via a second symbol, VSA volume emphasis, news blackout session. 5) Signal engine ⦁ Modes: MMxM, Trending, or Hybrid (auto switches depending on CB acceptance + ATR expansion). ⦁ A score (0–100) aggregates weighted conditions (GB touch/confluence, AMD alignment, CB state, TT, FVG/OB interaction, HTF bias, SMT, high-volume, RSI momentum). ⦁ Adaptive threshold raises/lowers requirements in TREND vs RANGE. ⦁ Outputs: BUY/SELL label with strength (WEAK/NORMAL/STRONG), a reasons string (e.g., GB+AMD+Breaker+TT+FVG+HTF+RSI), and risk levels: ⦁ SL: rejection/structure anchored (e.g., GB3/GB97 or recent swing ± ATR). ⦁ TP1: opposite breaker (41/59). ⦁ TP2: opposite FVG tendency (17/83). ⦁ Live RR displayed on label and plotted as dashed lines. ⦁ Cooldown, session/time, weekend, and volatility gates suppress poor-quality or clustered signals. What you see on the chart ⦁ PO3 bands: High/Low/Mid lines plus background shading for Premium (bear tint), Discount (bull tint), Equilibrium (neutral). ⦁ Goldbach lines: Major structure (0/50/100) plus the functional GB set (11/17/29/41/47/53/59/71/83/89/3/97). ⦁ Blocks & gaps: OB lines, FVG boxes (extend right, fill progress), LV box, breaker zone band, and TT logic states. ⦁ CE/MT: Central equilibrium (~3.5%/96.5%) and mid-towers (25%/75%) trigger optional alerts. ⦁ Session overlays: Asia/London/NY (optional). ⦁ Opens: Daily/Weekly (optional). ⦁ Dashboard: PO3 value, Zone (Premium/Discount/Equilibrium), AMD phase, Session, Mode (MMxM/Trending/Hybrid), CB state, nearest GB tag, Market context (TREND/RANGE/TRANS), recent Events, and rolling win-rate tallies (signals/CB/TT) from the current chart session. How to use it (workflow) 1. Pick a preset ⦁ Minimal: only core structure. ⦁ Standard: levels + dashboard. ⦁ Full: adds sessions + GBT window overlays. 2. Choose range logic ⦁ PO3 Auto is reactive and scales with ATR. ⦁ Manual PO3 is for precise range control. 3. Scope your bias ⦁ Confirm Zone (Premium/Discount), CB state, and AMD phase; check MTF row if enabled. ⦁ Strong setups usually appear when session-weighted GB levels + confluence ≥ 2 + CB revalidated + AMD = manipulation → distribution (short) or accumulation → manipulation (long). 4. Act on signals (optional) ⦁ When a label prints, read the factors string and score. ⦁ Use plotted SL/TP1/TP2 lines and RR. ⦁ Respect cooldown, news blackout, and volatility filter. Inputs you might tweak ⦁ PO3: Auto/Manual, acceptance by Close vs Wick, adaptive widening/tightening. ⦁ Levels: Major-only vs All; tolerance %; wick vs body touches. ⦁ Signals: Mode, score threshold, cooldown, confirm on close. ⦁ CB/TT: breaker width %, spacing window & tolerance, suppress bars after TT. ⦁ Filters: HTF timeframe, SMT symbol, VSA on/off, news blackout session. ⦁ Visuals: colors, line opacity, label sizes, dashboard position/size. ⦁ FVG/LV/CE/MT: fill %, and per-event alerts. Alerts available ⦁ BUY/SELL signal, PO3 shift, GB touch (with tag), CB broken/retest pass/fail, TT setup/confirmed, OB tagged, FVG formed/filled, LV expansion, CE/MT touches. Limitations & notes ⦁ Signals are contextual—they depend on the active PO3, tolerance, filters, session weighting, and volatility regime. ⦁ HTF requests depend on broker/exchange data and the timeframe you assign; if HTF is empty or illiquid, features degrade gracefully but may be less informative. ⦁ Win-rate tallies are session-local (not a historical performance guarantee). ⦁ Parameter choices (e.g., tolerance, breaker width, thresholds) materially change behavior. Disclaimer This tool is for educational/informational purposes only. It does not constitute financial advice, an invitation to trade, or performance assurance. Markets involve risk—always test on replay/paper and manage risk independently.
Pine Script® indicator
by RizwanFXCoder