Get started

Search in scripts for "reversal"

Probability Grid [LuxAlgo]The Probability Grid tool allows traders to see the probability of where and when the next reversal would occur, it displays a 10x10 grid and/or dashboard with the probability of the next reversal occurring beyond each cell or within each cell. 🔶 USAGE By default, the tool displays deciles (percentiles from 0 to 90), users can enable, disable and modify each percentile, but two of them must always be enabled or the tool will display an error message alerting of it. The use of the tool is quite simple, as shown in the chart above, the further the price moves on the grid, the higher the probability of a reversal. In this case, the reversal took place on the cell with a probability of 9%, which means that there is a probability of 91% within the square defined by the last reversal and this cell. 🔹 Grid vs Dashboard The tool can display a grid starting from the last reversal and/or a dashboard at three predefined locations, as shown in the chart above. 🔶 DETAILS 🔹 Raw Data vs Normalized Data By default the tool displays the normalized data, this means that instead of using the raw data (price delta between reversals) it uses the returns between each reversal, this is useful to make an apples to apples comparison of all the data in the dataset. This can be seen in the left side of the chart above (BTCUSD Daily chart) where normalize data is disabled, the percentiles from 0 to 40 overlap and are indistinguishable from each other because the tool uses the raw price delta over the entire bitcoin history, with normalize data enabled as we can see in the right side of the chart we can have a fair comparison of the data over the entire history. 🔹 Probability Beyond or Within Each Cell Two different probability modes are available, the default mode is Probability Beyond Each Cell, the number displayed in each cell is the probability of the next reversal to be located in the area beyond the cell, for example, if the cell displays 20%, it means that in the area formed by the square starting from the last reversal and ending at the cell, there is an 80% probability and outside that square there is a 20% probability for the location of the next reversal. The second probability mode is the probability within each cell, this outlines the chance that the next reversal will be within the cell, as we can see on the right chart above, when using deciles as percentiles (default settings), each cell has the same 1% probability for the 10x10 grid. 🔶 SETTINGS Swing Length: The maximum length in bars used to identify a swing Maximum Reversals: Maximum number of reversals included in calculations Normalize Data: Use returns between swings instead of raw price Probability: Choose between two different probability modes: beyond and inside each cell Percentiles: Enable/disable each of the ten percentiles and select the percentile number and line style 🔹 Dashboard Show Dashboard: Enable or disable the dashboard Position: Choose dashboard location Size: Choose dashboard size 🔹 Style Show Grid: Enable or disable the grid Size: Choose grid text size Colors: Choose grid background colors Show Marks: Enable/disable reversal markers
Pine Script® indicator
by LuxAlgo
11
Volume Weighted RSI (VW RSI)The Volume Weighted RSI (VW RSI) is a momentum oscillator designed for TradingView, implemented in Pine Script v6, that enhances the traditional Relative Strength Index (RSI) by incorporating trading volume into its calculation. Unlike the standard RSI, which measures the speed and change of price movements based solely on price data, the VW RSI weights its analysis by volume, emphasizing price movements backed by significant trading activity. This makes the VW RSI particularly effective for identifying bullish or bearish momentum, overbought/oversold conditions, and potential trend reversals in markets where volume plays a critical role, such as stocks, forex, and cryptocurrencies. Key Features Volume-Weighted Momentum Calculation: The VW RSI calculates momentum by comparing the volume associated with upward price movements (up-volume) to the volume associated with downward price movements (down-volume). Up-volume is the volume on bars where the closing price is higher than the previous close, while down-volume is the volume on bars where the closing price is lower than the previous close. These volumes are smoothed over a user-defined period (default: 14 bars) using a Running Moving Average (RMA), and the VW RSI is computed using the formula: \text{VW RSI} = 100 - \frac{100}{1 + \text{VoRS}} where \text{VoRS} = \frac{\text{Average Up-Volume}}{\text{Average Down-Volume}} . Oscillator Range and Interpretation: The VW RSI oscillates between 0 and 100, with a centerline at 50. Above 50: Indicates bullish volume momentum, suggesting that volume on up bars dominates, which may signal buying pressure and a potential uptrend. Below 50: Indicates bearish volume momentum, suggesting that volume on down bars dominates, which may signal selling pressure and a potential downtrend. Overbought/Oversold Levels: User-defined thresholds (default: 70 for overbought, 30 for oversold) help identify potential reversal points: VW RSI > 70: Overbought, indicating a possible pullback or reversal. VW RSI < 30: Oversold, indicating a possible bounce or reversal. Visual Elements: VW RSI Line: Plotted in a separate pane below the price chart, colored dynamically based on its value: Green when above 50 (bullish momentum). Red when below 50 (bearish momentum). Gray when at 50 (neutral). Centerline: A dashed line at 50, optionally displayed, serving as the neutral threshold between bullish and bearish momentum. Overbought/Oversold Lines: Dashed lines at the user-defined overbought (default: 70) and oversold (default: 30) levels, optionally displayed, to highlight extreme conditions. Background Coloring: The background of the VW RSI pane is shaded red when the indicator is in overbought territory and green when in oversold territory, providing a quick visual cue of potential reversal zones. Alerts: Built-in alerts for key events: Bullish Momentum: Triggered when the VW RSI crosses above 50, indicating a shift to bullish volume momentum. Bearish Momentum: Triggered when the VW RSI crosses below 50, indicating a shift to bearish volume momentum. Overbought Condition: Triggered when the VW RSI crosses above the overbought threshold (default: 70), signaling a potential pullback. Oversold Condition: Triggered when the VW RSI crosses below the oversold threshold (default: 30), signaling a potential bounce. Input Parameters VW RSI Length (default: 14): The period over which the up-volume and down-volume are smoothed to calculate the VW RSI. A longer period results in smoother signals, while a shorter period increases sensitivity. Overbought Level (default: 70): The threshold above which the VW RSI is considered overbought, indicating a potential reversal or pullback. Oversold Level (default: 30): The threshold below which the VW RSI is considered oversold, indicating a potential reversal or bounce. Show Centerline (default: true): Toggles the display of the 50 centerline, which separates bullish and bearish momentum zones. Show Overbought/Oversold Lines (default: true): Toggles the display of the overbought and oversold threshold lines. How It Works Volume Classification: For each bar, the indicator determines whether the price movement is upward or downward: If the current close is higher than the previous close, the bar’s volume is classified as up-volume. If the current close is lower than the previous close, the bar’s volume is classified as down-volume. If the close is unchanged, both up-volume and down-volume are set to 0 for that bar. Smoothing: The up-volume and down-volume are smoothed using a Running Moving Average (RMA) over the specified period (default: 14 bars) to reduce noise and provide a more stable measure of volume momentum. VW RSI Calculation: The Volume Relative Strength (VoRS) is calculated as the ratio of smoothed up-volume to smoothed down-volume. The VW RSI is then computed using the standard RSI formula, but with volume data instead of price changes, resulting in a value between 0 and 100. Visualization and Alerts: The VW RSI is plotted with dynamic coloring to reflect its momentum direction, and optional lines are drawn for the centerline and overbought/oversold levels. Background coloring highlights overbought and oversold conditions, and alerts notify the trader of significant crossings. Usage Timeframe: The VW RSI can be used on any timeframe, but it is particularly effective on intraday charts (e.g., 1-hour, 4-hour) or daily charts where volume data is reliable. Shorter timeframes may require a shorter length for increased sensitivity, while longer timeframes may benefit from a longer length for smoother signals. Markets: Best suited for markets with significant and reliable volume data, such as stocks, forex, and cryptocurrencies. It may be less effective in markets with low or inconsistent volume, such as certain futures contracts. Trading Strategies: Trend Confirmation: Use the VW RSI to confirm the direction of a trend. For example, in an uptrend, look for the VW RSI to remain above 50, indicating sustained bullish volume momentum, and consider buying on pullbacks when the VW RSI dips but stays above 50. In a downtrend, look for the VW RSI to remain below 50, indicating sustained bearish volume momentum, and consider selling on rallies when the VW RSI rises but stays below 50. Overbought/Oversold Conditions: When the VW RSI crosses above 70, the market may be overbought, suggesting a potential pullback or reversal. Consider taking profits on long positions or preparing for a short entry, but confirm with price action or other indicators. When the VW RSI crosses below 30, the market may be oversold, suggesting a potential bounce or reversal. Consider entering long positions or covering shorts, but confirm with additional signals. Divergences: Look for divergences between the VW RSI and price to spot potential reversals. For example, if the price makes a higher high but the VW RSI makes a lower high, this bearish divergence may signal an impending downtrend. Conversely, if the price makes a lower low but the VW RSI makes a higher low, this bullish divergence may signal an impending uptrend. Momentum Shifts: A crossover above 50 can signal the start of bullish momentum, making it a potential entry point for long trades. A crossunder below 50 can signal the start of bearish momentum, making it a potential entry point for short trades or an exit for long positions. Example On a 4-hour SOLUSDT chart: During an uptrend, the VW RSI might rise above 50 and stay there, confirming bullish volume momentum. If it approaches 70, it may indicate overbought conditions, as seen near a price peak of 145.08, suggesting a potential pullback. During a downtrend, the VW RSI might fall below 50, confirming bearish volume momentum. If it drops below 30 near a price low of 141.82, it may indicate oversold conditions, suggesting a potential bounce, as seen in a slight recovery afterward. A bullish divergence might occur if the price makes a lower low during the downtrend, but the VW RSI makes a higher low, signaling a potential reversal. Limitations Lagging Nature: Like the traditional RSI, the VW RSI is a lagging indicator because it relies on smoothed data (RMA). It may not react quickly to sudden price reversals, potentially missing the start of new trends. False Signals in Ranging Markets: In choppy or ranging markets, the VW RSI may oscillate around 50, generating frequent crossovers that lead to false signals. Combining it with a trend filter (e.g., ADX) can help mitigate this. Volume Data Dependency: The VW RSI relies on accurate volume data, which may be inconsistent or unavailable in some markets (e.g., certain forex pairs or futures contracts). In such cases, the indicator’s effectiveness may be reduced. Overbought/Oversold in Strong Trends: During strong trends, the VW RSI can remain in overbought or oversold territory for extended periods, leading to premature exit signals. Use additional confirmation to avoid exiting too early. Potential Improvements Smoothing Options: Add options to use different smoothing methods (e.g., EMA, SMA) instead of RMA for the up/down volume calculations, allowing users to adjust the indicator’s responsiveness. Divergence Detection: Include logic to detect and plot bullish/bearish divergences between the VW RSI and price, providing visual cues for potential reversals. Customizable Colors: Allow users to customize the colors of the VW RSI line, centerline, overbought/oversold lines, and background shading. Trend Filter: Integrate a trend strength filter (e.g., ADX > 25) to ensure signals are generated only during strong trends, reducing false signals in ranging markets. The Volume Weighted RSI (VW RSI) is a powerful tool for traders seeking to incorporate volume into their momentum analysis, offering a unique perspective on market dynamics by emphasizing price movements backed by significant trading activity. It is best used in conjunction with other indicators and price action analysis to confirm signals and improve trading decisions.
Pine Script® indicator
by CsokosGeza
Multi-Timeframe Stochastic OverviewPurpose of the Multi-Timeframe Stochastic Indicator: The Multi-Timeframe Stochastic Indicator provides a consolidated view of market conditions across multiple timeframes (M1, M5, M15, H1) based on the Stochastic Oscillator, a popular technical analysis tool. The main objective is to allow traders to quickly assess momentum and potential trend reversals across different timeframes on a single chart, helping to make informed trading decisions. --- General Purpose of Stochastic Oscillator: The Stochastic Oscillator measures the relationship between a security's closing price and its price range over a given period, aiming to identify momentum, overbought/oversold levels, and potential reversal points. It works on the assumption that: 1. In uptrends, prices tend to close near their highs. 2. In downtrends, prices tend to close near their lows. It consists of two lines: %K (fast line): Represents the raw Stochastic value. %D (slow line): A moving average of %K, used to smooth the data for better signals. The indicator is generally used to: Identify Overbought (price above 80% threshold) and Oversold (price below 20% threshold) conditions. Spot Bullish and Bearish divergences for potential trend reversals. Evaluate momentum strength within a trend. --- How This Multi-Timeframe Indicator Enhances Stochastic's Utility: 1. Multi-Timeframe Overview: The indicator calculates Stochastic values for multiple timeframes (1-minute, 5-minute, 15-minute, and 1-hour) and displays their market conditions (e.g., Bullish, Bearish, Overbought, Oversold, or Indecision) in an organized table format. This gives traders a broad perspective on short-term, mid-term, and long-term trends simultaneously. 2. Market Condition Summary: Bullish: Indicates upward momentum (both %K and %D > 50%). Bearish: Indicates downward momentum (both %K and %D < 50%). Overbought: Suggests potential trend exhaustion (both %K and %D > 80%). Oversold: Suggests a potential reversal to the upside (both %K and %D < 20%). Indecision: Highlights uncertainty when %K and %D are on opposite sides of the 50% level. 3. Quick Decision-Making: The color-coded table (green for Bullish/Overbought, red for Bearish/Oversold, orange for Indecision) allows traders to quickly identify dominant conditions and momentum alignment across timeframes, helping in trade confirmation. 4. Trend Analysis: By observing alignment or divergence in market conditions across timeframes, traders can gauge the strength of a trend or anticipate reversals. For example: If all timeframes show "Bullish," it suggests strong momentum. If smaller timeframes are "Overbought" while larger ones are "Bearish," it warns of a possible pullback. 5. Customizable Parameters: The indicator allows customization of Stochastic K, D, smoothing values, and overbought/oversold levels, enabling users to tailor the analysis to specific trading styles or market conditions. --- Use Cases: 1. Scalping: A scalper can use lower timeframes (e.g., M1, M5) to find overbought/oversold zones for quick trades. 2. Swing Trading: Swing traders can align smaller timeframes with higher ones (e.g., M15 and H1) to confirm momentum before entering a trade. 3. Trend Reversals: Overbought or oversold conditions across all timeframes may indicate a major reversal point, helping traders plan exits or countertrend entries. 4. Trend Continuation: Consistent bullish or bearish conditions across all timeframes confirm the continuation of a trend, providing confidence to hold positions. --- Summary: This indicator enhances the traditional Stochastic Oscillator by giving a multi-timeframe snapshot of market momentum, overbought/oversold conditions, and trend direction. It enables traders to quickly assess the overall market state, spot opportunities, and make more informed trading decisions.
Pine Script® indicator
by Elwick
1
Uptrick: DPO Signal & Zone Indicator ## **Uptrick: DPO Signal & Zone Indicator** ### **Introduction:** The **Uptrick: DPO Signal & Zone Indicator** is a sophisticated technical analysis tool tailored to provide insights into market momentum, identify potential trading signals, and recognize extreme market conditions. It leverages the Detrended Price Oscillator (DPO) to strip out long-term trends from price movements, allowing traders to focus on short-term fluctuations and cyclical behavior. The indicator integrates multiple components, including a Detrended Price Oscillator, a Signal Line, a Histogram, and customizable alert levels, to deliver a robust framework for market analysis and trading decision-making. ### **Detailed Breakdown:** #### **1. Detrended Price Oscillator (DPO):** - **Purpose and Functionality:** - The DPO is designed to filter out long-term trends from the price data, isolating short-term price movements. This helps in understanding the cyclical patterns and momentum of an asset, allowing traders to detect periods of acceleration or deceleration that might be overlooked when focusing solely on long-term trends. - **Calculation:** - **Formula:** `dpo = close - ta.sma(close, smaLength)` - **`close`:** The asset’s closing price for each period in the dataset. - **`ta.sma(close, smaLength)`:** The Simple Moving Average (SMA) of the closing prices over a period defined by `smaLength`. - The DPO is derived by subtracting the SMA value from the current closing price. This calculation reveals how much the current price deviates from the moving average, effectively detrending the price data. - **Interpretation:** - **Positive DPO Values:** Indicate that the current price is higher than the moving average, suggesting bullish market conditions and a potential upward trend. - **Negative DPO Values:** Indicate that the current price is lower than the moving average, suggesting bearish market conditions and a potential downward trend. - **Magnitude of DPO:** Reflects the strength of momentum. Larger positive or negative values suggest stronger momentum in the respective direction. #### **2. Signal Line:** - **Purpose and Functionality:** - The Signal Line is a smoothed average of the DPO, intended to act as a reference point for generating trading signals. It helps to filter out short-term fluctuations and provides a clearer perspective on the prevailing trend. - **Calculation:** - **Formula:** `signalLine = ta.sma(dpo, signalLength)` - **`ta.sma(dpo, signalLength)`:** The SMA of the DPO values over a period defined by `signalLength`. - The Signal Line is calculated by applying a moving average to the DPO values. This smoothing process reduces noise and highlights the underlying trend direction. - **Interpretation:** - **DPO Crossing Above Signal Line:** Generates a buy signal, suggesting that short-term momentum is turning bullish relative to the longer-term trend. - **DPO Crossing Below Signal Line:** Generates a sell signal, suggesting that short-term momentum is turning bearish relative to the longer-term trend. - **Signal Line’s Role:** Provides a benchmark for assessing the strength of the DPO. The interaction between the DPO and the Signal Line offers actionable insights into potential entry or exit points. #### **3. Histogram:** - **Purpose and Functionality:** - The Histogram visualizes the difference between the DPO and the Signal Line. It provides a graphical representation of momentum strength and direction, allowing traders to quickly gauge market conditions. - **Calculation:** - **Formula:** `histogram = dpo - signalLine` - The Histogram is computed by subtracting the Signal Line value from the DPO value. Positive values indicate that the DPO is above the Signal Line, while negative values indicate that the DPO is below the Signal Line. - **Interpretation:** - **Color Coding:** - **Green Bars:** Represent positive values, indicating bullish momentum. - **Red Bars:** Represent negative values, indicating bearish momentum. - **Width of Bars:** Indicates the strength of momentum. Wider bars signify stronger momentum, while narrower bars suggest weaker momentum. - **Zero Line:** A horizontal gray line that separates positive and negative histogram values. Crosses of the histogram through this zero line can signal shifts in momentum direction. #### **4. Alert Levels:** - **Purpose and Functionality:** - Alert levels define specific thresholds to identify extreme market conditions, such as overbought and oversold states. These levels help traders recognize potential reversal points and extreme market conditions. - **Inputs:** - **`alertLevel1`:** Defines the upper threshold for identifying overbought conditions. - **Default Value:** 0.5 - **`alertLevel2`:** Defines the lower threshold for identifying oversold conditions. - **Default Value:** -0.5 - **Interpretation:** - **Overbought Condition:** When the DPO exceeds `alertLevel1`, indicating that the market may be overbought. This condition suggests that the asset could be due for a correction or reversal. - **Oversold Condition:** When the DPO falls below `alertLevel2`, indicating that the market may be oversold. This condition suggests that the asset could be poised for a rebound or reversal. #### **5. Visual Elements:** - **DPO and Signal Line Plots:** - **DPO Plot:** - **Color:** Blue - **Width:** 2 pixels - **Purpose:** To visually represent the deviation of the current price from the moving average. - **Signal Line Plot:** - **Color:** Red - **Width:** 1 pixel - **Purpose:** To provide a smoothed reference for the DPO and generate trading signals. - **Histogram Plot:** - **Color Coding:** - **Green:** For positive values, signaling bullish momentum. - **Red:** For negative values, signaling bearish momentum. - **Style:** Histogram bars are displayed with varying width to represent the strength of momentum. - **Zero Line:** A gray horizontal line separating positive and negative histogram values. - **Overbought/Oversold Zones:** - **Background Colors:** - **Green Shading:** Applied when the DPO exceeds `alertLevel1`, indicating an overbought condition. - **Red Shading:** Applied when the DPO falls below `alertLevel2`, indicating an oversold condition. - **Horizontal Lines:** - **Dotted Green Line:** At `alertLevel1`, marking the upper alert threshold. - **Dotted Red Line:** At `alertLevel2`, marking the lower alert threshold. - **Purpose:** To provide clear visual cues for extreme market conditions, aiding in the identification of potential reversal points. #### **6. Trading Signals and Alerts:** - **Buy Signal:** - **Trigger:** When the DPO crosses above the Signal Line. - **Visual Representation:** A "BUY" label appears below the price bar in the specified buy color. - **Purpose:** Indicates a potential buying opportunity as short-term momentum turns bullish. - **Sell Signal:** - **Trigger:** When the DPO crosses below the Signal Line. - **Visual Representation:** A "SELL" label appears above the price bar in the specified sell color. - **Purpose:** Indicates a potential selling opportunity as short-term momentum turns bearish. - **Overbought/Oversold Alerts:** - **Overbought Alert:** Triggered when the DPO crosses below `alertLevel1`. - **Oversold Alert:** Triggered when the DPO crosses above `alertLevel2`. - **Visual Representation:** Labels "OVERBOUGHT" and "OVERSOLD" appear with distinctive colors and sizes to highlight extreme conditions. - **Purpose:** To signal potential reversal points and extreme market conditions that may lead to price corrections or trend reversals. - **Alert Conditions:** - **DPO Cross Above Signal Line:** Alerts traders when the DPO crosses above the Signal Line, generating a buy signal. - **DPO Cross Below Signal Line:** Alerts traders when the DPO crosses below the Signal Line, generating a sell signal. - **DPO Above Upper Alert Level:** Alerts when the DPO is above `alertLevel1`, indicating an overbought condition. - **DPO Below Lower Alert Level:** Alerts when the DPO is below `alertLevel2`, indicating an oversold condition. - **Purpose:** To provide real-time notifications of significant market events, enabling traders to make informed decisions promptly. ### **Practical Applications:** #### **1. Trend Following Strategies:** - **Objective:** - To capture and ride the prevailing market trends by entering trades that align with the direction of the momentum. - **How to Use:** - Monitor buy and sell signals generated by the DPO crossing the Signal Line. A buy signal suggests a bullish trend and a potential long trade, while a sell signal suggests a bearish trend and a potential short trade. - Use the Histogram to confirm the strength of the trend. Expanding green bars indicate strong bullish momentum, while expanding red bars indicate strong bearish momentum. - **Advantages:** - Helps traders stay aligned with the market trend, increasing the likelihood of capturing substantial price moves. #### **2. Reversal Trading:** - **Objective:** - To identify potential market reversals by detecting overbought and oversold conditions. - **How to Use:** - Look for overbought and oversold signals based on the DPO crossing `alertLevel1` and `alertLevel2`. These conditions suggest that the market may be due for a reversal. - Confirm reversal signals with the Histogram. A decrease in histogram bars (from green to red or vice versa) may support the reversal hypothesis. - **Advantages:** - Provides early warnings of potential market reversals, allowing traders to position themselves before significant price changes occur. #### **3. Momentum Analysis:** - **Objective:** - To gauge the strength and direction of market momentum for making informed trading decisions. - **How to Use:** - Analyze the Histogram to assess momentum strength. Positive and expanding histogram bars indicate increasing bullish momentum, while negative and expanding bars suggest increasing bearish momentum. - Use momentum insights to validate or question existing trading positions and strategies. - **Advantages:** - Offers valuable information about the market's momentum, helping traders confirm the validity of trends and trading signals. ### **Customization and Flexibility:** The **Uptrick: DPO Signal & Zone Indicator** offers extensive customization options to accommodate diverse trading preferences and market conditions: - **SMA Length and Signal Line Length:** - Adjust the `smaLength` and `signalLength` parameters to control the sensitivity and responsiveness of the DPO and Signal Line. Shorter lengths make the indicator more responsive to price changes, while longer lengths provide smoother, less volatile signals. - **Alert Levels:** - Modify `alertLevel1` and `alertLevel2` to fit varying market conditions and volatility. Setting these levels appropriately helps tailor the indicator to different asset classes and trading strategies. - **Color and Shape Customization:** - Customize the colors and sizes of buy/sell signals, histogram bars, and alert levels to enhance visual clarity and align with personal preferences. This customization helps ensure that the indicator integrates seamlessly with a trader's charting setup. ### **Conclusion:** The **Uptrick: DPO Signal & Zone Indicator** is a multifaceted analytical tool that combines the power of the Detrended Price Oscillator with customizable visual elements and alert levels to deliver a comprehensive approach to market analysis. By offering insights into momentum strength, trend direction, and potential reversal points, this indicator equips traders with valuable information to make informed decisions and enhance their trading strategies. Its flexibility and customization options ensure that it can be adapted to various trading styles and market conditions, making it a versatile addition to any trader's toolkit.
Pine Script® indicator
by Uptrick
1
GL Gann Swing IndicatorIntroduction The GL Gann Swing Indicator is a versatile tool designed to help traders identify market trends, support and resistance areas, and potential reversals. This indicator applies the principles of Gann Swing Charts, a technique developed by W.D. Gann, which focuses on market swings to determine the overall direction and turning points of price action. Gann Swing Charts are a time-tested method of technical analysis that simplifies price action by focusing on significant highs and lows, thereby eliminating market noise and providing a clearer view of the trend. By analyzing price action and determining swing directions and turning points, the indicator filters out market noise using four distinct bar types: Up Bar: Higher High, Higher Low Down Bar: Lower High, Lower Low Inside Bar: Lower High, Higher Low Outside Bar: Higher High, Lower Low This approach helps traders to: Identify the primary trend direction. Determine key support and resistance levels. Recognize potential reversal points. Filter out minor price fluctuations that do not affect the overall trend. Features Bar Types: Display bar types by checking the Show Bar Type box in the indicator's settings. Up bars appear as green upward-pointing triangles, down bars as red downward-pointing triangles, inside bars as grey circles, and outside bars as blue diamonds. These visual aids help traders quickly identify the type of bar and its significance. Break Lines: These lines highlight when the price rises above a previous swing high or falls below a prior swing low. Green lines indicate breaks of swing highs, while red lines indicate breaks of swing lows. Break lines are enabled by default but can be turned off in the indicator's settings. Break lines provide visual confirmation of trend continuation or reversal. Bar Count: Bar counts help determine if a swing is overextended and if a reversal is likely. This feature is off by default but can be enabled in the indicator's settings. Users can set a minimum bar count to focus on significant swings. Analyzing the number of bars in a swing can help traders gauge the strength and potential exhaustion of a trend. Swing MA (Moving Averages): This feature plots the average of a user-defined number of previous swing highs and lows. Options are available to add two moving averages, allowing for both fast and slow averages. Swing MAs can be enabled in the indicator's settings. These moving averages smooth out the price data, making it easier to identify the underlying trend direction. Why This Indicator is Useful The GL Gann Swing Indicator is particularly useful for several reasons: Trend Identification: By focusing on significant price swings, the indicator helps traders identify the primary trend direction, making it easier to align trades with the overall market movement. Noise Reduction: The indicator filters out minor price fluctuations, allowing traders to focus on meaningful market movements and avoid being misled by short-term volatility. Support and Resistance Levels: By highlighting key swing highs and lows, the indicator helps traders identify crucial support and resistance levels, which are essential for making informed trading decisions. Potential Reversals: The indicator's ability to identify overextended swings and potential reversal points can help traders anticipate market turning points and adjust their strategies accordingly. Customizability: With options to display bar types, break lines, bar counts, and swing moving averages, traders can customize the indicator to suit their specific trading style and preferences. By incorporating Gann Swing principles, the GL Gann Swing Indicator offers traders a powerful tool to enhance their technical analysis, improve their trading decisions, and ultimately achieve better trading outcomes.
Pine Script® indicator
by guusl
15
price action reversion bands - [SigmaStreet]█ OVERVIEW The "Price Action Reversion Bands" is designed to help traders identify potential reversal zones through the integration of polynomial regression, fractal analysis, and pinbar detection. This tool overlays directly onto the price chart, providing dynamic visual cues and signals for market reversals. Its unique synthesis of these methodologies offers traders a powerful, multifaceted approach to market analysis. █ CONCEPTS Polynomial Regression Bands: What It Does: Models the main trend using a polynomial equation to create a middle trend line with dynamic support and resistance bands. How It Works: Calculates polynomial coefficients to plot a regression line and adjusts the bands according to market volatility and conditions. Fibonacci Retracement Levels: What It Does: Provides additional lines inside the regression bands at key Fibonacci ratios to identify potential support and resistance areas. How It Works: Calculates retracement levels by identifying high and low points over the same period used to calculate the regression bands, applying Fibonacci ratios to these points. Fractal Analysis: What It Does: Identifies natural resistance and support levels, indicating potential reversal zones. How It Works: Detects fractals based on a specific pattern of price action, using Williams Fractal methodology. Pinbar Detection: What It Does: Signals potential price reversals through pinbar candlestick patterns. How It Works: Analyzes candlesticks to identify pinbars which show a rejection of prices, suggesting possible reversals. █ ORIGINALITY AND USEFULNESS The price action reversion bands distinguishes itself through its innovative integration of several advanced analytical methods, providing traders with a holistic view of potential market reversals: Unique Combination: While many tools use these techniques in isolation, this indicator synergistically combines polynomial regression, Fibonacci retracement levels, fractal analysis, and pinbar detection. This multi-faceted approach allows traders to assess strength, potential reversal zones, and price rejection more effectively than using traditional single-method indicators. Advanced Polynomial Regression Application: Unlike standard regression tools that offer static insights, this indicator dynamically adjusts its regression bands based on real-time market volatility, providing a more accurate reflection of market conditions. Enhanced Signal Reliability: By using fractals and pinbars in conjunction to validate each other, the indicator significantly increases the reliability of its reversal signals. This dual-validation method filters out less probable signals, focusing on high-probability trading opportunities. Customization and Flexibility: It offers unprecedented customization options, allowing traders to fine-tune the tool according to their trading style and market conditions. Traders can adjust the polynomial degree, the sensitivity of the Fibonacci retracements, and even the definition of what constitutes a significant pinbar, making it highly adaptable to various trading scenarios. Educational Value: The indicator not only aids in trading but also serves as an educational tool that helps traders understand the interaction between different types of market analysis techniques. This contributes to a deeper knowledge base and better trading decisions over time. These distinctive features make the "Price Action Reversion Bands - " not just another indicator but a comprehensive trading tool that enhances decision-making through a well-rounded analysis of market dynamics. █ HOW TO USE Installation and Setup: Apply the indicator to your TradingView chart from the "Indicators" menu. Select either polynomial regression or Fibonacci retracement as the basis for the bands through the indicator settings. Reading the Indicator: Monitor the approach of price to the upper and lower bands which indicate potential reversal zones. Look for fractal and pinbar formations near these bands for additional signal confirmation. Customization: Adjust settings such as the polynomial degree, data window length, and engagement zones to tailor the bands to your trading style. Modify visual aspects like color and line type for better clarity and personal preference. █ FEATURES Dynamic Adjustment: Bands adjust in real-time based on incoming price data and selected settings. Multiple Analysis Techniques: Combines several analytical techniques to provide a comprehensive view of potential market movements. The integration of polynomial regression with Fibonacci levels, supplemented by fractal and pinbar analysis, marks this tool as particularly innovative, offering a level of synthesis that enhances predictive accuracy and usability. User-Friendly Customization: Allows for extensive customization to suit individual trading strategies and preferences. █ LIMITATIONS Market Dependency: Performance may vary significantly across different markets and conditions. Parameter Sensitivity: Requires fine-tuning of parameters to ensure optimal performance, which might demand a steep learning curve for new users. █ NOTES For best results, combine this tool with other forms of analysis, such as fundamental analysis and other technical indicators, to confirm signals and enhance decision-making. █ THANKS Special thanks to the PineCoders community the Pine Coders themselves for their foundational contributions to the concepts used in this script. Their pioneering work in the fields of technical analysis and Pine Script development has been invaluable. This script is a testament to the collaborative spirit of the TradingView developer community, integrating analytical techniques with innovative approaches to offer a tool that is both modern and cutting-edge.
Pine Script® indicator
by sigmastreet
19
Opening Score with DivergenceOverview The Opening Score Indicator is a versatile tool designed to help traders assess market sentiment, trend direction, and potential reversals. By combining Opening Range Breakout (ORB), VWAP, Trend, Volatility, and Divergence Detection, this indicator provides a composite score that adapts to different market conditions. This version includes divergence detection between the Opening Score and price, which highlights potential trend reversals or continuations before they happen. When a regular divergence occurs, the histogram bar turns orange, signaling an increased probability of a trend change. Best for Both Intraday & Longer-Term Charts 📊 Optimized for intraday trading → Works well on 1m to 30m timeframes for short-term strategies. 📈 Also effective on longer-term charts → Can be used on 1-hour, 4-hour, daily, or weekly charts to identify macro trends and momentum shifts. 🕰️ Adapts to different market conditions → Whether you’re a day trader, swing trader, or position trader, the Opening Score helps you track trend health and reversals. How It Works 📊 Composite Opening Score Calculation • ORB Signal → Detects bullish/bearish breakouts based on the opening range. • VWAP Signal → Measures price positioning relative to VWAP for trend confirmation. • Trend Signal → Uses a moving average to determine market direction. • Volatility Signal → Tracks ATR changes to assess market strength. • Divergence Detection → Identifies regular and hidden divergences for potential reversals or trend continuation. 🔹 Reversal Alerts with Color-Coded Histogram • Green Bars → Normal bullish Opening Score. • Red Bars → Normal bearish Opening Score. • Orange Bars → Warning! Regular Divergence detected → Possible trend reversal. 🔹 Hidden & Regular Divergence Detection • Regular Divergence (Reversal Signals) • 📉 Bearish Regular Divergence → Price makes a Higher High, but Opening Score makes a Lower High → 🔻 Possible Downtrend Reversal. • 📈 Bullish Regular Divergence → Price makes a Lower Low, but Opening Score makes a Higher Low → 🔼 Possible Uptrend Reversal. • Hidden Divergence (Trend Continuation Signals) • 📉 Bearish Hidden Divergence → Price makes a Lower High, but Opening Score makes a Higher High → 🔻 Trend Likely to Continue Down. • 📈 Bullish Hidden Divergence → Price makes a Higher Low, but Opening Score makes a Lower Low → 🔼 Trend Likely to Continue Up. How to Use It ✅ Watch for Reversal Alerts (Orange Bars) → These highlight potential market turning points. ✅ Use the Zero Line as a Trend Filter → A score above 0 suggests bullish conditions, while below 0 signals bearish conditions. ✅ Combine with Market Structure & Volume Profile → Works well when paired with support/resistance levels, liquidity zones, and order flow data. ✅ Adjust settings based on timeframe → Increase moving average length & lookback periods for longer-term analysis. Why Use This Indicator? 🚀 Works for both short-term and long-term traders → Adapts to intraday and higher timeframes. 📊 Multi-Factor Analysis → Combines multiple key market indicators for better accuracy. 🎯 Customizable Weighting → Adjust the influence of each signal to suit your trading style. ✅ No Clutter – Only the Opening Score is plotted → Keeps your chart clean & efficient. 🔔 Recommended for Intraday Trading (1m – 30m) AND Longer-Term Analysis (1H – Weekly) → Use this indicator to enhance your trend detection & reversal strategy! 🚀
Pine Script® indicator
by traderofoptions
1
Bollinger Bands + RSI [Uncle Sam Trading]The Bollinger Bands + RSI indicator combines two popular technical analysis tools, Bollinger Bands (BB) and the Relative Strength Index (RSI), into a unified framework designed to assess both market volatility and momentum. This indicator provides both visual signals on the chart, and allows you to set alerts. It is intended to help traders identify potential overbought/oversold conditions, trend reversals, and to refine trade entry and exit points. Key Features: Bollinger Bands: The indicator plots Bollinger Bands, which consist of a basis line (typically a 20-period Simple Moving Average), an upper band (basis + 2 standard deviations), and a lower band (basis - 2 standard deviations). The bands dynamically adjust to market volatility, widening during periods of increased volatility and contracting during periods of decreased volatility. Relative Strength Index (RSI): The RSI, a momentum oscillator, is plotted in a separate pane below the price chart. It measures the magnitude of recent price changes to evaluate overbought or oversold conditions in the price of a stock or other asset. Traditional interpretation uses 70 and 30 as overbought and oversold levels, respectively.   Overbought/Oversold Zones Highlighting: This indicator uniquely highlights overbought and oversold zones directly on the price chart based on the RSI values. When the RSI is above the overbought level (default 70), a red-shaded area is displayed. When the RSI is below the oversold level (default 30), a green-shaded area is displayed. These visual cues enhance the identification of potential trend reversals. Buy and Sell Signals: The indicator generates buy signals when the price crosses above the lower Bollinger Band and the RSI is below the oversold level (if the RSI filter is enabled). Sell signals are generated when the price crosses below the upper Bollinger Band and the RSI is above the overbought level (if the RSI filter is enabled). These signals are plotted as green upward-pointing triangles (buy) and red downward-pointing triangles (sell) on the chart. Customizable Parameters: Users can adjust various settings, including: Bollinger Bands Length: The number of periods used to calculate the moving average and standard deviation. Bollinger Bands Standard Deviation: The multiplier used to determine the distance of the upper and lower bands from the basis. RSI Length: The number of periods used to calculate the RSI. RSI Overbought/Oversold Levels: The threshold values that define overbought and oversold conditions for the RSI. Use RSI Filter for Signals: Enable/disable the RSI filter for buy and sell signals. Colors: The colors of the Bollinger Bands, RSI, overbought/oversold levels, and zone highlights can be customized to suit user preferences. Alerts: The indicator supports customizable alerts for various conditions, including: Buy Signal: Triggered when a buy signal is generated. Sell Signal: Triggered when a sell signal is generated. Price Crossed Upper BB: Triggered when the price crosses above the upper Bollinger Band. Price Crossed Lower BB: Triggered when the price crosses below the lower Bollinger Band. RSI Overbought: Triggered when the RSI crosses above the overbought level. RSI Oversold: Triggered when the RSI crosses below the oversold level. How to Use: The Bollinger Bands + RSI indicator can be used in various ways, including: Identifying Potential Trend Reversals: Price crosses above the lower band coupled with an oversold RSI (and highlighted zone) may signal a bullish reversal. Conversely, a price cross below the upper band with an overbought RSI (and highlighted zone) may indicate a bearish reversal. Confirming Trend Strength: In an uptrend, the price may "ride" the upper band, while in a downtrend, it may "ride" the lower band. Exit Signals: Crossing the opposite band while in a trade, particularly with confirming RSI signals, is often used to identify potential exit points. Combined with Other Analysis: This indicator works well in conjunction with other technical analysis tools, such as trend lines, support/resistance levels, chart patterns, and moving average-based strategies. Disclaimer: This indicator is for educational and informational purposes only and should not be considered as financial advice. Trading involves risk, and past performance is not indicative of future results. Always conduct thorough research and consider your risk tolerance before making any trading decisions.
Pine Script® indicator
by UncleSamTrading
Custom Moving Average Ribbon with EMA Table & Text ColorComprehensive Description of the Custom Moving Average Ribbon with EMA Table & Text Color The Custom Moving Average Ribbon with EMA Table & Text Color is a highly flexible and customizable indicator designed for traders who use multiple moving averages to assess trends, strength, and potential market reversals. It plots up to 8 moving averages (either SMA, EMA, WMA, or VWMA) on the price chart and displays a table summarizing the moving averages’ values, periods, and colors. The table also allows for the customization of the text color, making it easier to align with your chart’s theme or preference. Key Features: Multiple Moving Averages: You can display up to 8 moving averages (MA), each of which can be customized in terms of: Type: SMA (Simple Moving Average), EMA (Exponential Moving Average), WMA (Weighted Moving Average), or VWMA (Volume-Weighted Moving Average). Period: Each moving average has a user-defined period, which allows for flexibility depending on your trading style (short-term, medium-term, or long-term). Enable/Disable: Each moving average can be independently enabled or disabled based on your preference. Moving Average Ribbon: The indicator visualizes multiple moving averages as a ribbon, giving traders insight into the market's underlying trend. The interaction between these moving averages provides essential signals: Uptrend: Shorter-term MAs above longer-term MAs, all sloping upward. Downtrend: Shorter-term MAs below longer-term MAs, sloping downward. Consolidation: MAs tightly packed, indicating low volatility or a sideways market. Customizable Table: The indicator includes a table that displays: The Name of each moving average (e.g., MA 1, MA 2, etc.). The Period used for each moving average. The Current Value of each moving average. Color Coding for easier visual identification on the chart. Text Color Customization: You can change the text color in the table to match your chart style or to ensure high visibility. Responsive Design: This indicator works on any time frame, whether you're a day trader, swing trader, or long-term investor, and the table adjusts dynamically as new data comes in. How to Use the Indicator a) Trend Identification The Custom Moving Average Ribbon helps in identifying trends and their strength. Here’s how you can interpret the plotted moving averages: Uptrend (Bullish): If the shorter-term moving averages (e.g., 5-period, 10-period) are above the longer-term moving averages (e.g., 50-period, 200-period), and all the MAs are sloping upward, it suggests a strong bullish trend. The greater the separation between the moving averages, the stronger the uptrend. Use the table to quickly verify the current value of each MA and confirm that the price is staying above most or all of the MAs. Downtrend (Bearish): When shorter-term moving averages are below the longer-term moving averages and all MAs are sloping downward, this indicates a bearish trend. Greater separation between MAs indicates a stronger downtrend. Neutral/Consolidating Market: If the MAs are tightly packed and frequently crossing each other, the market is likely consolidating, and a strong trend is not in play. In these situations, it’s better to wait for a clearer signal before taking any positions. b) Reversal Signals Golden Cross: When a short-term moving average (e.g., 50-period) crosses above a long-term moving average (e.g., 200-period), this is considered a bullish signal, suggesting a possible upward trend. Death Cross: When a short-term moving average crosses below a long-term moving average, it’s considered a bearish signal, indicating a potential downward trend. c) Using the Table for Quick Reference The table allows you to monitor: The current price value relative to each moving average. If the price is above most MAs, the market is likely in an uptrend, and if below, in a downtrend. Changes in MA values: If you see values of shorter-term MAs moving closer to or crossing longer-term MAs, this could indicate a weakening trend or a potential reversal. How to Combine this Indicator with Other Indicators for a Solid Strategy The Custom Moving Average Ribbon is powerful on its own but can be enhanced when combined with other technical indicators to form a comprehensive trading strategy. 1. Combining with RSI (Relative Strength Index) How It Works: RSI is a momentum oscillator that measures the speed and change of price movements, typically over 14 periods. It ranges from 0 to 100, with readings above 70 considered overbought and below 30 considered oversold. Strategy: Overbought in an Uptrend: If the moving average ribbon indicates an uptrend but the RSI shows the market is overbought (RSI > 70), it could signal a pullback or correction is imminent. Oversold in a Downtrend: If the moving average ribbon indicates a downtrend but the RSI shows oversold conditions (RSI < 30), a bounce or reversal may be on the horizon. 2. Combining with MACD (Moving Average Convergence Divergence) How It Works: MACD tracks the difference between two exponential moving averages, typically the 12-period and 26-period EMAs. It generates buy and sell signals based on crossovers and divergences. Strategy: Trend Confirmation: Use the MACD to confirm the direction and momentum of the trend indicated by the moving average ribbon. For example, if the MACD line crosses above the signal line while the shorter-term MAs are above the longer-term MAs, it confirms strong bullish momentum. Divergences: Watch for divergences between price action and MACD. If price is making higher highs but MACD is making lower highs, it could signal a weakening trend, which you can verify using the moving averages. 3. Combining with Bollinger Bands How It Works: Bollinger Bands plot two standard deviations above and below a moving average, typically the 20-period SMA. The bands widen during periods of high volatility and contract during periods of low volatility. Strategy: Breakout or Reversal: If price action moves above the upper Bollinger Band while the shorter-term MAs are crossing above the longer-term MAs, it confirms a strong breakout. Conversely, if price touches or falls below the lower Bollinger Band and the shorter MAs start crossing below the longer-term MAs, it indicates a potential breakdown. Mean Reversion: In sideways markets, when the moving averages are tightly packed, Bollinger Bands can help spot mean reversion opportunities (buy near the lower band, sell near the upper band). 4. Combining with Volume Indicators How It Works: Volume is a crucial confirmation indicator for any trend or breakout. Combining volume with the moving average ribbon can enhance your strategy. Strategy: Trend Confirmation: If the price breaks above the moving averages and is accompanied by high volume, it confirms a strong breakout. Similarly, if price breaks below the moving averages on high volume, it signals a strong downtrend. Divergence: If price continues to trend in one direction but volume decreases, it could indicate a weakening trend, helping you prepare for a reversal. Example Strategies Using the Indicator Trend-Following Strategy: Use the moving average ribbon to identify the main trend. Combine with MACD or RSI for confirmation of momentum. Enter trades when the shorter-term MAs confirm the trend and the confirmation indicator (MACD or RSI) aligns with the trend. Exit trades when the moving averages start converging or when your confirmation indicator shows signs of reversal. Reversal Strategy: Wait for significant crossovers in the moving averages (Golden Cross or Death Cross). Confirm the reversal with divergence in MACD or RSI. Use Bollinger Bands to fine-tune your entry and exit points based on overbought/oversold conditions. Conclusion The Custom Moving Average Ribbon with EMA Table & Text Color indicator provides a robust framework for traders looking to use multiple moving averages to gauge trend direction, strength, and potential reversals. By combining it with other technical indicators like RSI, MACD, Bollinger Bands, and volume, you can develop a solid trading strategy that enhances accuracy, reduces false signals, and maximizes profit potential in various market conditions. This indicator offers high flexibility with customization options, making it suitable for traders of all levels and strategies. Whether you're trend-following, scalping, or swing trading, this tool provides invaluable insights into market movements.
Pine Script® indicator
by paulaustin3977
Market Structure Trailing Stop [BigBeluga]The Market Structure Trailing Stop indicator is an advanced tool for identifying market structure shifts, liquidity sweeps, and potential trend reversals using comprehensive volume analysis. This indicator combines the analysis of market structure pivots (CHoCH - Change of Character) with a sophisticated volume-based trailing stop logic. By evaluating delta volume at key structural points, it allows traders to identify high-probability trend continuations or reversals and manage their trades more effectively. 🔵 KEY FEATURES ● Market Structure Analysis Pivot-Based Market Structure : The indicator identifies high and lows using user-defined periods, allowing traders to spot key market structure shifts. Change of Character (CHoCH) : The first significant break of a market structure is marked as a CHoCH, indicating a potential trend reversal. Break of Structure (BoS) : The indicator highlights subsequent breaks of structure after CHoCH, providing traders with crucial insights into trend strength. ● Advanced Volume Analysis Delta Volume Evaluation : The indicator calculates delta volume (difference between up and down volume) at each ChoCh or BoS market structure point to assess the strength of the move. Identify Delta Volume from break point back to Pivot ● Trailing Stop Logic Volume-Validated Trailing Stop : The indicator automatically plots a trailing stop if the delta volume at the UP CHoCH is positive and above the defined threshold and vice versa for Down CHoCH , allowing traders to protect their profits while riding the trend. Trend Weakness Detection : If a subsequent BoS occurs with negative delta volume or lower volume than the input threshold, the trailing stop disappears, indicating potential trend exhaustion or reversal. Dynamic Stop Placement : The trailing stop is dynamically adjusted based on market structure and volume, providing traders with a more adaptive stop-loss strategy. Up Trend Trailing Stop: Down Trend Trailing Stop: ● Liquidity Sweep Detection Liquidity Sweep (X) Labels : The indicator identifies liquidity sweeps—points where the price temporarily reverses to sweep liquidity above or below a key level—marked with an “X” label. Potential Reversal Zones : These liquidity sweeps are potential reversal zones, especially when accompanied by significant delta volume changes, providing traders with early warnings of potential trend reversals. 🔵 HOW TO USE ● Identifying Market Structure Shifts Change of Character (CHoCH) : When a CHoCH occurs, the indicator calculates the total volume from the high point to the break point. If the delta volume is positive and exceeds the input threshold, a trailing stop is plotted, signaling potential trend continuation. Break of Structure (BoS) : If BoS is enabled, subsequent breaks of structure are highlighted. If these BoS points show weaker volume or negative delta volume, the trailing stop will disappear, indicating that the trend may be losing strength. ● Using the Trailing Stop Feature Protecting Profits : Once a CHoCH occurs and the delta volume validates the trend, the trailing stop will be plotted below (or above) the price to protect profits while allowing the trend to run. Trend Reversal Signals : If the trailing stop disappears due to weak volume at subsequent BoS points, it may signal that the trend is losing momentum, and traders may consider closing their positions or tightening their stops manually. ● Liquidity Sweep Interpretation Spotting Reversal Zones : Liquidity sweeps, marked with an “X” label, indicate zones where the price has swept liquidity. These areas can serve as potential reversal zones, especially when significant delta volume is observed at these points. Early Reversal Warnings : Traders can use these liquidity sweep labels as early warnings for potential trend reversals, particularly in conjunction with other technical analysis methods. 🔵 CUSTOMIZATION Highs and Lows Calculation : Customize the number of bars to the left and right for identifying pivots and market structure shifts. Volume Threshold : Define the volume threshold to filter out weaker moves and focus on significant market structure shifts. BoS and Liquidity Sweep Labels : Toggle on or off the BoS and Liquidity Sweep labels to tailor the indicator to your trading style. Trend Color : Enable or disable trend coloring for candles to visually highlight uptrends and downtrends on the chart. 🔵 CONCLUSION The Market Structure Trailing Stop indicator combines advanced volume analysis with market structure detection to provide traders with a powerful tool for identifying and managing trends. By leveraging delta volume at key structure points, it helps traders validate trend strength and manage their positions with a dynamic trailing stop strategy. The addition of liquidity sweep detection further enhances its utility, offering early warnings of potential trend reversals. This indicator is ideal for traders who want to gain a deeper understanding of market structure while incorporating volume-based insights into their trading strategies.
Pine Script® indicator
by BigBeluga
10
VWAP Xing D, Prv.D, W, Q, M, & Y + SD [UOI]Introducing the "VWAP Xing D, Prv.D, W, Q, M, & Y + SD" Indicator: A Comprehensive, Multi-Timeframe Trading Tool for the Modern Trader In today's dynamic and fast-paced financial markets, traders require versatile and powerful tools that can help them navigate the complex world of trading. The "VWAP Xing D, Prv.D, W, Q, M, & Y + SD" indicator is designed to be the ultimate, all-in-one solution for traders seeking a comprehensive and robust trading indicator. This cutting-edge tool combines the power of an extensive VWAP library with the versatility of Bollinger Bands, Donchian Channels, standard deviation multi-timeframe analysis, and an auto boxed range identifier, all to provide traders with the crucial insights needed to identify reversals, breakdowns, and breakups. Offering the magnetic daily, previous day, weekly, monthly, quarterly, and even yearly VWAP levels, this comprehensive library caters to traders with varying time horizons and strategies. Coupled with the precision of Bollinger Bands and Donchian Channels, the indicator allows for accurate tracking of price volatility, enabling traders to make more informed decisions in response to changing market conditions. The integration of multi-timeframe standard deviation analysis further bolsters the indicator's ability to identify potential trading opportunities, ensuring that users can stay ahead of the curve. Finally, the auto boxed range identifier serves as the cherry on top, automatically detecting critical price levels where reversals, breakdowns, and breakups are most likely to occur. This powerful feature not only helps traders confirm potential entry and exit points but also allows for more effective risk management. Overall, the "VWAP Xing D, Prv.D, W, Q, M, & Y + SD" indicator is a comprehensive, multi-timeframe trading tool that empowers traders with unparalleled insights, precision, and adaptability. Whether you're a seasoned professional or a novice trader, this powerful indicator is a must-have tool for anyone looking to excel in today's competitive financial markets. Multi-timeframe Volume Weighted Average First let's define Volume Weighted Average Price (VWAP): Volume Weighted Average Price (VWAP) is a widely-used technical analysis indicator that calculates the average price of a security, taking into account both price and trading volume. In essence, it represents the average price at which a security has been traded throughout a specified time period, giving more weight to transactions with higher volume. The VWAP is often used by traders and investors to assess the market's trend and gauge the relative value of a security. It serves as a benchmark for institutional investors, who often use it to evaluate their trading performance and determine whether they are buying or selling at favorable prices. The formula for calculating VWAP is: VWAP = (Sum of (Price * Volume)) / Total Volume By incorporating volume into the calculation, the VWAP provides a more accurate representation of a security's true average price, as it takes into consideration the impact of larger trades on the price. This makes it a valuable tool for traders seeking to make more informed decisions in the market and avoid getting caught in unfavorable trading positions. VWAP is a crucial indicator that provides insights into the average price at which a financial asset, such as a stock or cryptocurrency, has been traded throughout a specific period. It takes into consideration the volume of trades executed at each price level during that period. The VWAP lines included in the " VWAP Xing D, Prv. D, W, Q, M, & Y" indicator offer various timeframe perspectives, allowing traders to analyze different levels of market trends and behaviors. Here's a detailed explanation of the VWAP lines and their significance: 1. Daily VWAP (D): The daily VWAP line represents the average price at which the asset has been traded throughout the current trading day. It resets at the beginning of each trading session. Traders often use the daily VWAP as a reference point to gauge the fairness of their trade executions relative to the prevailing market prices. Price deviations from the daily VWAP can indicate shifts in market sentiment and potential trading opportunities. 2. Previous Day VWAP (Prv.D): The previous day VWAP line reflects the average price at which the asset was traded during the preceding trading day. It helps traders assess the continuity or deviation of the current day's price action relative to the previous day's trading activity. Traders often observe the previous day VWAP for insights into potential support or resistance levels and to identify whether the current day's price is trading above or below the previous day's average price. 3. Weekly VWAP (W): The weekly VWAP line calculates the average price of the asset over the entire week, taking into account the volume traded at each price level. Traders use the weekly VWAP to gain a broader perspective on the asset's price movement and potential trend directions. It can act as a significant support or resistance level, especially when the price interacts with the weekly VWAP. 4. Monthly VWAP (M): The monthly VWAP line provides a longer-term perspective by averaging the asset's price and volume data over the entire month. It helps traders identify key price levels that are significant within the monthly timeframe. Traders often observe the monthly VWAP to assess the overall trend and to determine whether the current price is trading above or below the monthly average. 5. Quarterly VWAP (Q): The quarterly VWAP line calculates the average price and volume data over a three-month period, representing a longer-term view of market activity. Traders use the quarterly VWAP to identify significant price levels and to analyze the broader trend within the quarterly timeframe. Deviations from the quarterly VWAP can indicate potential shifts in market sentiment and trading opportunities. 6. Yearly VWAP (Y): The yearly VWAP line represents the average price and volume data over the course of a year. It offers a comprehensive long-term perspective on the asset's price behavior and trend. Traders often consider the yearly VWAP as a key reference point for assessing the asset's overall performance and identifying major support or resistance levels. By observing the VWAP lines, traders can gain insights into the prevailing market sentiment, potential support or resistance levels, and deviations from average prices. These deviations can be useful for identifying potential trading opportunities, such as when the price significantly deviates from the VWAP lines, suggesting potential overbought or oversold conditions. Additionally, VWAP can serve as a benchmark for evaluating trade executions and assessing the fair value of an asset. It's important to note that while VWAP is a valuable tool, it should be used in conjunction with other technical analysis indicators and strategies to make informed trading decisions. Traders should consider factors like market context, trend analysis, and risk management principles to validate signals and confirm potential trading opportunities. Bollinger Bands and Donchian Channels In addition to VWAP this indicator also has combined the power of Bollinger Bands and Donchian Channels to produce a solid framework. The time frame by default is set to 30 min which is good for intraday trading but you can also change that in the setting to always use chart time frame intervals which works better on longer time frames. IMPORTANT: You can change the time frame to always use chart or keep the default on 30 min or change it to another timeframe manually. If you allow the chart to always provide the intervals then the default 30 min will be ineffective and it automatically adjust to chart timeframe. Personally I think a fixed timeframe work better so keep in that way if you trade on 30 min or lower time frame. Bollinger Bands and Donchian Channels are two popular technical analysis tools that provide valuable insights into price volatility, potential breakout levels, and support/resistance areas. When used in combination, they offer a comprehensive framework for analyzing market conditions and identifying trading opportunities. Bollinger Bands: Bollinger Bands consist of two lines plotted above and below a moving average, typically a simple moving average (SMA). The upper band is calculated by adding the standard deviation of price multiplied by a customizable standard deviation factor to the SMA. The lower band is calculated by subtracting the standard deviation multiplied by the same factor from the SMA. The key features of Bollinger Bands are as follows: 1. Volatility Measurement: Bollinger Bands expand and contract based on market volatility. When the bands widen, it indicates higher volatility, and when they narrow, it suggests lower volatility. Traders can observe the width of the bands to gauge the potential for price movements and volatility expansions. 2. Overbought/Oversold Levels: Bollinger Bands can help identify overbought and oversold conditions in the market. When the price reaches or exceeds the upper band, it may indicate that the asset is overbought and due for a potential reversal or pullback. Conversely, when the price reaches or falls below the lower band, it may suggest oversold conditions and a possible bounce or reversal. Donchian Channels: Donchian Channels consist of two lines representing the highest high and lowest low within a specified period. The key characteristics of Donchian Channels are as follows: 1. Breakout Levels: The upper line of the Donchian Channel represents the highest high within the specified period, while the lower line represents the lowest low. Traders often use Donchian Channels to identify potential breakout levels. When the price breaks above the upper channel line, it may indicate a bullish breakout and the potential for further upward momentum. Conversely, a break below the lower channel line suggests a bearish breakout and the possibility of downward momentum. 2. Support/Resistance Areas: Donchian Channels also act as dynamic support and resistance levels. The upper channel line can act as a resistance level where the price may encounter selling pressure. The lower channel line can act as a support level where the price may find buying interest. Traders can monitor price interactions with these levels to make informed trading decisions. Advantages of Using Bollinger Bands and Donchian Channels Together: By combining Bollinger Bands and Donchian Channels, traders can gain a more comprehensive view of market conditions and potential trading opportunities. Here are some advantages of using them together: 1. Volatility Confirmation: Bollinger Bands help identify periods of high or low volatility, while Donchian Channels confirm breakouts and potential trend changes. When the bands widen and a breakout occurs above or below the Donchian Channels, it can provide confirmation of increased volatility and the start of a new trend. 2. Price Extremes and Breakouts: Bollinger Bands assist in identifying overbought and oversold conditions, while Donchian Channels help pinpoint breakout levels. When price reaches an extreme level according to Bollinger Bands and coincides with a breakout from the Donchian Channels, it can signal a significant trading opportunity. 3. Support/Resistance Validation: Donchian Channels act as dynamic support and resistance levels, and Bollinger Bands can validate these levels. When price bounces off the upper or lower Bollinger Band near a Donchian Channel level, it provides additional confirmation of the support or resistance area. 4. Risk Management: The combination of Bollinger Bands and Donchian Channels enables traders to set more precise stop-loss levels and define risk. They can place stop-loss orders beyond the support or resistance levels identified. Standard Deviation Standard deviation bands by default are disabled but you can easily enable them in the setting. The 1 standard deviation bands are made invisible by default to avoid a crowded space. You can reduce the transparency to view them. In intraday trading, the Daily VWAP (Volume Weighted Average Price) with 3 standard deviations is a powerful tool that helps traders gauge price movements and potential trading opportunities. Here's how it works and why it is useful: 1. Calculation of Daily VWAP: The Daily VWAP is the average price at which a security has traded throughout the trading day, weighted by the volume of each trade. It provides a measure of the average price that traders have paid for the asset during the day. 2. Standard Deviation: Standard deviation is a statistical measure that quantifies the dispersion or variability of prices around the Daily VWAP. It gives an indication of how much prices deviate from the average. A higher standard deviation suggests greater price volatility. 3. Three Standard Deviations: By adding and subtracting three times the standard deviation from the Daily VWAP, you create bands that represent the potential price range within which the majority of intraday trading activity is expected to occur. These bands act as potential support and resistance levels and help traders identify price extremes. 4. Price Reversals: When the intraday price extends beyond the upper or lower band (three standard deviations), it suggests an overextended move or potential price reversal. Traders interpret this as an opportunity to enter or exit trades. If the price moves beyond the upper band, it may indicate overbought conditions and a possible reversal to the downside. Conversely, if the price moves below the lower band, it may signal oversold conditions and a potential reversal to the upside. 5. Volatility and Breakouts: Intraday traders often look for volatility and breakout opportunities. The three standard deviation bands on the Daily VWAP provide valuable information about price volatility. When the price breaks out of the bands, it suggests a significant increase in volatility and potential opportunities for intraday traders to take advantage of strong momentum moves. 6. Risk Management: The three standard deviation bands help traders define their risk and set stop-loss orders. By placing stop-loss orders outside the bands, traders can protect their positions in case the price moves beyond the expected range. This risk management technique allows traders to limit their potential losses and preserve capital. 7. Confirmation with Other Indicators: Intraday traders often use the three standard deviation bands on the Daily VWAP in conjunction with other technical indicators or chart patterns to strengthen their trading decisions. The bands can validate other signals or provide additional confirmation before entering or exiting a trade. Overall, the Daily VWAP with three standard deviations is a valuable tool for intraday traders as it helps identify price extremes, potential reversals, volatility, and breakout opportunities. By incorporating this indicator into their trading strategies, traders can make more informed decisions and enhance their intraday trading performance. Auto Boxed Range Detector The true innovation in the "VWAP Xing D, Prv.D, W, Q, M, & Y + SD" indicator lies in the integration of the sophisticated 'Auto Boxed Range Detector.' This feature serves as the cornerstone of the tool's enhanced functionality, shedding light on critical price ranges to give traders a distinct advantage when identifying potential breakouts or breakdowns. Meticulously designed with the needs of traders in mind, the Auto Boxed Range Detector automates the process of pinpointing trading ranges, resulting in increased precision and swiftness in your decision-making. By automating this crucial aspect of technical analysis, traders can now focus on other essential factors, ultimately maximizing their trading efficiency. Furthermore, the Auto Boxed Range Detector helps traders avoid falling prey to false breakouts. By identifying the top of the boxed range in relation to resistance levels, users can more accurately predict the likelihood of a breakout. For instance, if the top of the boxed range is situated near a resistance line, the chances of a breakout are diminished unless the market is experiencing a trend day. In essence, the Auto Boxed Range Detector not only streamlines the identification of trading ranges but also provides invaluable insights into the validity of potential breakouts or breakdowns. This innovative feature makes the "VWAP Xing D, Prv.D, W, Q, M, & Y + SD" indicator an indispensable tool for traders seeking to capitalize on opportunities while minimizing risk in today's fast-paced financial markets. Once you get used to this tool it will be an integral part of your trading.
Pine Script® indicator
by uoi2020
150
Crypto RSI Oscillator [marksc]This is my main indicator of pricing trend reversals. It consists of two main indicators: 1. The green/red oscillator shows a general rising (green) or falling (red) price trend over a smoothed average of a number of periods (length). 2. The yellow "OverUnder Line" shows the Relative Strength Index adjusted price trend in real time. How to use it: - You will need to adjust the Overbought and Underbought (green and red) horizontal lines such that the yellow line rarely peaks past them. This will depend on historical data and the time-scale you're using. So if you configure it on a 15minute timescale and then switch to hourly the lines will need-readjusted. This is because the yellow line's movement is "Relative" to a number of periods of time in the timescale. Predicting Pricing Reversals: Adjust the Overbought and Underbought lines such that, in the past, the yellow line has rarely peaked over or under them. When the yellow line peaks over or under one of the Over/Underbought lines again the price will likely make a strong reversal. (Conversely, if the yellow line is not peaking but staying mostly flat or only slightly angled then the pricing trend is likely to continue.) Predicting "Pump and Dumps": If the price makes a sharp reversal while the yellow line was far from the over/underbought lines (ie. the yellow line was near the center), this indicates that a larger purchase or sale than has happened in a long time just happened. In most cases the price will quickly correct back to where it was because this sharp price reversal was was abnormal over the length*period used in the RSI calculation.
Pine Script® indicator
by marksc
1
GMO (Gyroscopic Momentum Oscillator) GMO Overview This indicator fuses multiple advanced concepts to give traders a comprehensive view of market momentum, volatility, and potential turning points. It leverages the Gyroscopic Momentum Oscillator (GMO) foundation and layers on IQR-based bands, dynamic ATR-adjusted OB/OS levels, torque filtering, and divergence detection. The outcome is a versatile tool that can assist in identifying both short-term squeezes and long-term reversal zones while detecting subtle shifts in momentum acceleration. Key Components: Gyroscopic Momentum Oscillator (GMO) – A physics-inspired metric capturing trend stability and momentum by treating price dynamics as “angle,” “angular velocity,” and “inertia.” IQR Bands – Highlight statistically typical oscillation ranges, providing insight into short-term squeezes and potential near-term trend shifts. ATR-Adjusted OB/OS Levels – Dynamic thresholds for overbought/oversold conditions, adapting to volatility, aiding in identifying long-term potential reversal zones. Torque Filtering & Scaling – Smooths and thresholds torque (the rate of change of momentum) and visually scales it for clarity, indicating sudden force changes that may precede volatility adjustments. Divergence Detection – Highlights potential reversal cues by comparing oscillator swings against price swings, revealing regular and hidden bullish/bearish divergences. Conceptual Insights IQR Bands (Short-Term Squeeze & Trend Direction): Short-Term Momentum and Squeeze: The IQR (Interquartile Range) bands show where the oscillator tends to “live” statistically. When the GMO line hovers within compressed IQR bands, it can signal a momentum squeeze phase. Exiting these tight ranges often correlates with short-term breakout opportunities. Trend Reversals: If the oscillator pushes beyond these IQR ranges, it may indicate an emerging short-term trend change. Traders can watch for GMO escaping the IQR “comfort zone” to anticipate a new directional move. Dynamic OB/OS Levels (Long-Term Reversal Zones): ATR-Based Adaptive Thresholds: Instead of static overbought/oversold lines, this tool uses ATR to adjust OB/OS boundaries. In calm markets, these lines remain closer to ±90. As volatility rises, they approach ±100, reflecting greater permissible swings. Long-Term Trend Reversal Potential: If GMO hits these dynamically adjusted OB/OS extremes, it suggests conditions ripe for possible long-term trend reversals. Traders seeking major inflection points may find these adaptive levels more reliable than fixed thresholds. Torque (Sudden Force & Directional Shifts): Momentum Acceleration Insight: Torque represents the second derivative of momentum, highlighting how quickly momentum is changing. High positive torque suggests a rapidly strengthening bullish force, while high negative torque warns of sudden bearish pressure. Early Warning & Stability/Volatility Adjustments: By monitoring torque spikes, traders can anticipate momentum shifts before price fully confirms them. This can signal imminent changes in stability or increased volatility phases. Indicator Parameters and Usage GMO-Related Inputs: lenPivot (Default 100): Length for calculating the pivot line (slow market axis). lenSmoothAngle (Default 200): Smooths the angle measure, reducing noise. lenATR (Default 14): ATR period for scaling factor, linking price changes to volatility. useVolatility (Default true): If true, volatility (ATR) influences inertia, adjusting momentum calculations. useVolume (Default false): If true, volume affects inertia, adding a liquidity dimension to momentum. lenVolSmoothing (Default 50): Smooths volume calculations if useVolume is enabled. lenMomentumSmooth (Default 20): EMA smoothing of GMO for a cleaner oscillator line. normalizeRange (Default true): Normalizes GMO to a fixed range for consistent interpretation. lenNorm (Default 100): Length for normalization window, ensuring GMO’s scale adapts to recent extremes. IQR Bands Settings: iqrLength (Default 14): Period to compute the oscillator’s statistical IQR. iqrMult (Default 1.5): Multiplier to define the upper and lower IQR-based bands. ATR-Adjusted OB/OS Settings: baseOBLevel (Fixed at 90) and baseOSLevel (Fixed at 90): Base lines for OB/OS. atrPeriodForOBOS (Default 50): ATR length for adjusting OB/OS thresholds dynamically. atrScaling (Default 0.2): Controls how strongly volatility affects OB/OS lines. Torque Filtering & Visualization: torqueSmoothLength (Default 10): EMA length to smooth raw torque values. atrPeriodForTorque (Default 14): ATR period to determine torque threshold. atrTorqueScaling (Default 0.5): Scales ATR for determining torque’s “significant” threshold. torqueScaleFactor (Default 10.0): Multiplies the torque values for better visual prominence on the chart. Divergence Inputs: showDivergences (Default true): Toggles divergence signals. lbR, lbL (Defaults 5): Pivot lookback periods to identify swing highs and lows. rangeUpper, rangeLower: Bar constraints to validate potential divergences. plotBull, plotHiddenBull, plotBear, plotHiddenBear: Toggles for each divergence type. Visual Elements on the Chart GMO Line (Blue) & Zero Line (Gray): GMO line oscillates around zero. Positive territory hints bullish momentum, negative suggests bearish. IQR Bands (Teal Lines & Yellow Fill): Upper/lower bands form a statistical “normal range” for GMO. The median line (purple) provides a central reference. Contraction near these bands indicates a short-term squeeze, expansions beyond them can signal emerging short-term trend changes. Dynamic OB/OS (Red & Green Lines): Red line near +90 to +100: Overbought zone (dynamic). Green line near -90 to -100: Oversold zone (dynamic). Movement into these zones may mark significant, longer-term reversal potential. Torque Histogram (Colored Bars): Plotted below GMO. Green bars = torque above positive threshold (bullish acceleration). Red bars = torque below negative threshold (bearish acceleration). Gray bars = neutral range. This provides early warnings of momentum shifts before price responds fully. Precession (Orange Line): Scaled for visibility, adds context to long-term angular shifts in the oscillator. Divergence Signals (Shapes): Circles and offset lines highlight regular or hidden bullish/bearish divergences, offering potential reversal signals. Practical Interpretation & Strategy Short-Term Opportunities (IQR Focus): If GMO compresses within IQR bands, the market might be “winding up.” A break above/below these bands can signal a short-term trade opportunity. Long-Term Reversal Zones (Dynamic OB/OS): When GMO approaches these dynamically adjusted extremes, conditions may be ripe for a major trend shift. This is particularly useful for swing or position traders looking for significant turnarounds. Monitoring Torque for Acceleration Cues: Torque spikes can precede price action, serving as an early catalyst signal. If torque turns strongly positive, anticipate bullish acceleration; strongly negative torque may warn of upcoming bearish pressure. Confirm with Divergences: Divergences between price and GMO reinforce potential reversal or continuation signals identified by IQR, OB/OS, or torque. Use them to increase confidence in setups. Tips and Best Practices Combine with Price & Volume Action: While the indicator is powerful, always confirm signals with actual price structure, volume patterns, or other trend-following tools. Adjust Lengths & Periods as Needed: Shorter lengths = more responsiveness but more noise. Longer lengths = smoother signals but greater lag. Tune parameters to match your trading style and timeframe. Use ATR and Volume Settings Wisely: If markets are highly volatile, consider useVolatility to refine momentum readings. If liquidity is key, enable useVolume. Scaling Torque: If torque bars are hard to read, increase torqueScaleFactor further. The scaling doesn’t affect logic—only visibility. Conclusion The “GMO + IQR Bands + ATR-Adjusted OB/OS + Torque Filtering (Scaled)” indicator presents a holistic framework for understanding market momentum across multiple timescales and conditions. By interpreting short-term squeezes via IQR bands, long-term reversal zones via adaptive OB/OS, and subtle acceleration changes through torque, traders can gain advanced insights into when to anticipate breakouts, manage risk around potential reversals, and fine-tune timing for entries and exits. This integrated approach helps navigate complex market dynamics, making it a valuable addition to any technical analysis toolkit.
Pine Script® indicator
by TEDCORP2
3
Xtrender and TSI FusionXtrender and TSI Fusion Indicator I created this indicator for myself. I was inspired by the indicators created by Bjorgum, Duyck and QuantTherapy and decided to create multiple indicators that either work well combined with their indicators or something new that applies some of their indicator concepts. I decided to share all of the indicator I have created because I believe in learning and earing together as a community. If you guys have any questions or suggestions write them. Overview: The Xtrender and TSI Fusion Indicator is a powerful tool designed to help traders analyze market momentum, trends, and potential reversals. By combining Xtrender with the True Strength Index (TSI), this indicator provides a comprehensive view of market dynamics, making it easier to identify trading opportunities. Image: Timeframe is set to daily Features: 1.Xtrender Analysis: Short-Term Xtrender: Visualizes short-term momentum using RSI-based calculations on EMA differences. This helps in identifying immediate market trends and pullbacks. Image above: showcases Short-Term Xtrender Xtrender T3: A smoothed version of the Xtrender that reduces noise and highlights significant trend changes. Image above: showcases Xtrender T3 with Xtrender T3 color 2.TSI (True Strength Index): TSI Value: Measures momentum by comparing price changes over two time periods, offering a clear view of trend strength. TSI Signal Line: A smoothed version of the TSI value, used to generate buy and sell signals when crossed by the TSI. Image: showcases TSI Value with TSI Signal Line TSI Histogram: Shows the difference between the TSI and its signal line, highlighting potential reversals and trend continuations. Image: showcases TSI Histogram 3.Color Coding and Visual Cues: Trend Colors: The indicator uses dynamic colors to represent bullish or bearish conditions, making it easy to interpret market sentiment. Background Color : The background changes color based on TSI signals, further aiding in visual trend analysis. Image: showcases Background color and Zero line How to Use 1.Xtrender Analysis: Short-Term Xtrender: The short-term Xtrender is plotted as columns, changing color based on its direction and value. Green or lime indicates positive momentum, while red or maroon indicates negative momentum. Xtrender T3: The Xtrender T3 line (black) represents a smoothed version of the short-term Xtrender, providing a clearer picture of the overall trend. The color of this line changes based on the Xtrender's value, helping you spot potential trend changes. 2.TSI (True Strength Index): TSI Value and Signal Line: The TSI value is plotted as a line, with its color changing based on its relationship to the signal line. A crossover of the TSI above the signal line suggests a potential bullish move, while a crossover below indicates a bearish trend. TSI Histogram: The histogram represents the difference between the TSI and its signal line. Positive values indicate bullish momentum, while negative values suggest bearish momentum. 3.Background Color: The background color changes based on the TSI signal, with a greenish hue indicating bullish conditions and a reddish hue indicating bearish conditions. This provides a quick visual reference for market sentiment. 4.Zero Line: A horizontal gray dotted line at the zero level helps you easily identify when the Xtrender or TSI crosses into positive or negative territory, signaling potential trend shifts. Image above: Timeframe on daily with the individual elements combined Example of Use: •Trend Confirmation: Use the Xtrender and Xtrender T3 to confirm the direction of the trend. If both are aligned with the same color and direction, it increases the probability of a strong trend. •Momentum Reversals: Watch for TSI crosses and histogram shifts to identify potential reversals. For example, a TSI crossover above its signal line with a corresponding change in the histogram from negative to positive could signal a buying opportunity. •Pullbacks: Identify pullbacks within a trend by observing temporary shifts in the short-term Xtrender or TSI histogram. Use these signals to enter trades in the direction of the overall trend. Image above: Showcases, Trend confirmation, reversal and pullbacks on daily timeframe. Customization: •TSI Speed: Choose between "Fast" and "Slow" TSI settings based on your trading style. Fast settings are more responsive to price changes, while slow settings offer smoother signals. •Color Settings: Customize the colors for bullish, bearish, and neutral TSI conditions to match your personal preferences or chart theme. This indicator is versatile and can be used for various trading strategies, from trend following to momentum trading, making it a valuable tool in any trader's arsenal. My Scripts/Indicators/Ideas /Systems that I share are only for educational purposes
Pine Script® indicator
by Debis03
12
RSI ATR Range [SS]Hey everyone, Over the course of the last year I had a bunch of requests to do something with RSI. I did do an RSI expected move plotter, but the requests were to overhaul RSI and make it better I guess. So here is my attempt! This is the RSI ATR plotter. Its similar to my RSI expected move plotter, however, it gives you the ATR ranges associated with the current RSI value. This allows you to conceptualize RSI in a different way. Instead of looking for "oversold" over "overbought", you can actually just see the expected high to open range and the expected open to low range based on the current RSI. This will allow you to determine such things as: a) Is it likely to be bullish? b) Is it likely to be bearish? c) The average move, in a dollar amount, associated with this RSI. In addition to presenting RSI in terms of ranges as opposed to the actual RSI value, the indicator will also signal likely reversal areas. Whenever there is a huge spike in RSI and range, whether it be up or down, this generally corresponds to an imminent reversal. The indicator is programmed to recognize this and plot little grey circles to notify you of an impending reversal. Let's take a look at some reversal examples using NVDA: In the chart above, we can see that the RSI signaled a reversal. As it was part of a downtrend, the reversal was bullish. Let's look at a top reversal: The chart above shows a likely downside reversal. And some little bounce reversals here and there: In addition to showing you the ATR range and reversals, the indicator will show you the RSI in a bar graph format: You won't be able to look for RSI divergences, if you are a believer of those. However, you can definitely visualize them in the ATR ranges which are directly affected by the RSI readings. Aspects of the indicator: Bull ranges are displayed in green. Bear ranges are displayed in red. When green is present we know its entering or currently in a bullish RSI range: Inversely, when it starts to shift red, we know we are entering a bearish RSI range: There is a border that circles the range. It will be green when we are in a bullish range and red when we are in a bearish range. In addition to these 2 signals, the RSI bar chart itself will turn green in bullish ranges, and red in bearish ranges. Here is bullish: Here is bearish: Customizability You can customize the Source input for the RSI (default is close). As well as the length (default is 14). The ATR length is defaulted to 500. My suggestion is to leave this be. You can increase it but I would not suggest decreasing it as it may omit some of the RSI ranges from its history. And that is the indicator my friends! Hope you enjoy! As always, safe trades!
Pine Script® indicator
by Steversteves
5
MFX Ultimate Scalper [Mohs Mayfair]MFX Ultimate Scalper is an all-in-one indicator that incorporates 5+ unique components designed for interoperability & confluence with one another to provide a powerful trend following & reversal detection experience. Users can create various ways to utilize the indicator's features together such as looking for periods of price exhaustion in the market alongside strong reversal signals appearing or getting real-time divergence signals alongside a shift in volume with the volume overlay setting in the market to predict upcoming trends. The indicator's confirmation feature integrates customizable moving averages and the Volume Weighted Average Price (VWAP), providing additional layers of insight. Traders can fine-tune moving averages to track trend reversals and retracements with precision, while the VWAP offers valuable insights into price and volume dynamics, aiding in the assessment of market sentiment and trends. This indicator is described as an ”Ultimate Scalper” as it's made up of many different components that can create a systematic approach to analyzing markets alone, however, the indicator also can serve as a great secondary piece to a user's primary analysis. ⨭ FEATURES Below we describe each component of MFX Ultimate Scalper in order of each's significance for the most confluent analysis possible. ➟ Heat Zones - indicating the relative intensity of price movement, with widening zones suggesting increased volatility and potential trading opportunities. ➟ Exhaustion Signals - Small triangles on the upper or lower heat band zones represent high frequency points that indicate possible reversals or a warning signal to upcoming larger reversal signals. Discerning instances of heightened buying or selling pressure, delineating zones of market saturation and depletion using the historical strength or weakness of a stock or market based on the closing prices of a recent trading period. ➟ Reversal Signals - Kalman filter and Hull trend indicators can reveal trend reversals by dynamically adapting to market conditions and providing timely signals based on smoothed price movements. ➟ Volume Overlay - Upon calculating the relative close of candles, this option allows a coloured overlay upon candles to help confirm volume changes in the market. When price of a closed candle is greater than then open price, the bar will print with a green overlay, Generally, we recommend using these features in order from first to last, however it is always most productive to ensure you find further confluence alongside any signal that is generated using general market structure and analysis (such as drawing independent supply and demand zones for eg). ⨭ USAGE GUIDE In the images below, we can see 3 points of interest to a user analyzing MFX Ultimate Scalper based on various different behaviors. In the circled areas of interest price moves into a one of the heat zones and begins to print a small green or red triangle either above or below the candlestick structure - green = looking for buys and a possible bullish reversal & red = looking for sells and a possible bearish reversal. As price begins to print these pre reversal points of exhaustion within these heat zones we can begin looking at the market. This can be used independently or when wanting to perhaps increase the amount of confirmations we can look to apply the reversal confirmation setting, as per below: What makes this signal particularly more of interest opposed to other reversal signals without the confirmation toggle applied that may not play out right away is the Kalman filter and Hull trend indicator begins to show a clear trend reversal. We can see that it may print the BUY or SELL label a few candles after the initial Small triangles in the upper or lower heat band zones however can be used as a more conservative point of trade entry. This is a great example above showing how the momentum indicator that measures the magnitude of recent price changes to analyze overbought or oversold conditions (red and green triangles in the heat zone bands) can sometimes print multiple entries. We suggest that if you are looking to increase the accuracy of the signals we found moving to a higher time frame after more than 3 of these indicators have printed, helps. It is a great indication that price may be looking to reverse and the pressure occurring and that the market could easily reverse in these conditions. The candles that follow with the confirmation toggle setting means that you could move into a position a little later into the new trend reversal or retracement but also ensures that there is an extra level of confirmation that one is beginning or has begun. The volume overlay setting is a fantastic tool to use when wanting to confirm your entries for trade and print a clear example in volume shift in the market - the greater the green candle, the greater the buying momentum. The greater the red candle, the greater the selling momentum, This analysis combined gave us a further indication of a larger reversal which played out with no lag at all as all reversal signals are predictive separate from the Volume Overlay itself, which can be used as a further trend following approach alongside signals & custom hull trend alongside specific moving average confirmations. In the image above we can see 3 possible setups and 3 different ways each using individual options. Working left to right, the first setup adheres to: ➟PRICE IN THE BUY ZONE ➟GREEN BUY TRIANGLE REVERSAL ➟GREEN CANDLE VOLUME CHANGE ➟NO BLUE TREND LABEL CONFIRMATION When scalping a position using the above signals we would aim for 10-15 pips which we can see here, with no drawdown was able to close and hit our suggested take profit within approximately an hour even though the confirmation trend reversal did not print on the chart Setup two is another BUY signal and adheres to: ➟PRICE IN THE BUY ZONE ➟GREEN BUY TRIANGLE PRINTED ➟BLUE CONFIRMATION PRINTED ➟WAIT FOR THE NEXT CANDLE TO CLOSE ➟TAKE A BUY This time we have a clear price exhaustion with the candles closing within the heat zones, just the first buy zone. The confirmation reversal trend prints soon after and although we do not have any confirmation on the volume change overlay we can infer that given they were printed very shortly prior to this confirmation and the preliminary Scalpers green triangles had also shown, the trade confirmation is still valid. You could perhaps place your stop loss at the base of the reversal blue buy label and then set a 1:2 ratio or perhaps simply stick to the 10-15 pips. With our final example the confirmations are: ➟PRICE IN THE SELL ZONE ➟RED SELL TRIANGLE REVERSAL ➟THE RED TREND CONFIRMATION LABEL WAS TOO MANY CANDLES AWAY TO CONSIDER THE TRADE The volume indicator printing over an engulfing bearish candle whilst also being within our heat zone exhaustion sell area shows a shift in volume and momentum - as calculated, the open price of the candle is greater than that of the closed previous one thus showing RED overlay of the candle. In order to better experience the volume overlay option we suggest changing your settings on tradingview by clicking the chart screen settings > symbol and changing the body and wicks of the candlesticks to grey. We can potentially determine at certain points when to 'filter out' reversal signals or to just consider them merely indications of local tops/bottoms opposed to significant tops/bottoms. Analyzing the reversal confirmation option is useful to consider a trend potentially coming to an end. We recommend studying the outlined chart above & the list of indications at each shaded area to develop a deep understanding of how to navigate varying market conditions & spot various points of confluence during reversals. ⨭CONCLUSION & ACCESS This indicator is an extremely comprehensive approach to a variety of volume and volatility based tools predominantly that allows users to further develop a systematic approach to trading and can be paired alongside other forms of technical analysis. Although we believe this indicator to be useful, it's critical to understand that past performance is not necessarily indicative of future results and there are many more factors that go into being a profitable trader. You can see the Author's instructions below to get instant access to MFX Ultimate Scalper by Mohs Mayfair
Pine Script® indicator
by VIPMFX
28
RVol LabelThis Code is update version of Code Provided by @ssbukam, Here is Link to his original Code and review the Description Below is Original Description 1. When chart resolution is Daily or Intraday (D, 4H, 1H, 5min, etc), Relative Volume shows value based on DAILY. RVol is measured on daily basis to compare past N number of days. 2. When resolution is changed to Weekly or Monthly, then Relative Volume shows corresponding value. i.e. Weekly shows weekly relative volume of this week compared to past 'N' weeks. Likewise for Monthly. You would see change in label name. Like, Weekly chart shows W_RVol (Weekly Relative Volume). Likewise, Daily & Intraday shows D_RVol. Monthly shows M_RVol (Monthly Relative Volume). 3. Added a plot (by default hidden) for this specific reason: When you move the cursor to focus specific candle, then Indicator Value displays relative volume of that specific candle. This applies to Intraday as well. So if you're in 1HR chart and move the cursor to a specific candle, Indicator Value shows relative volume for that specific candlestick bar. 4. Updating the script so that text size and location can be customized. Changes to Updated Label by me 1. Added Today's Volume to the Label 2. Added Total Average Volume to the Label 3. Comparison vs Both in Single Line and showing how much volume has traded vs the average volume for that time of the day 4. Aesthetic Look of the Label How to Use Relative Volume for Trading Using Relative Volume (RVol) in trading can be a valuable tool to help you identify potential trading opportunities and gain insight into market behavior. Here are some ways to use RVol in your trading strategy: Identifying High-Volume Breakouts: RVol can help you spot potential breakouts when the volume surges significantly above its average. High RVol during a breakout suggests strong market interest, increasing the probability of a sustained move in the direction of the breakout. Confirming Trends and Reversals: RVol can act as a confirmation tool for trends and reversals. A trend accompanied by rising RVol indicates a strong and sustainable move. Conversely, a trend with declining RVol might suggest a weakening trend or potential reversal. Spotting Volume Divergence: When the price is moving in one direction, but RVol is declining or not confirming the move, it may indicate a divergence. This discrepancy could suggest a potential reversal or trend change. Support and Resistance Confirmation: High RVol near key support or resistance levels can indicate potential price reactions at those levels. This confirmation can be valuable in determining whether a level is likely to hold or break. Filtering Trade Signals: Incorporate RVol into your existing trading strategy as a filter. For example, you might consider taking trades only if RVol is above a certain threshold, ensuring that you focus on high-impact trading opportunities. Avoiding Low-Volume Traps: Low RVol can indicate a lack of interest or participation in the market. In such situations, price movements may be erratic and less reliable, so it's often wise to avoid trading during low RVol periods. Monitoring News Events: Around significant news events or earnings releases, RVol can help you gauge the market's reaction to the information. High RVol during such events can present trading opportunities but be cautious of increased volatility and potential gaps. Adjusting Trade Size: During periods of extremely high RVol, it might be prudent to adjust your position size to account for higher risk. Using Relative Volume in Morning Session If the Volume traded in first 15 minute to 30 Minutes is already at 50% or 100% depending upon the ticker, it means that it is going to have very high Volume vs average by end of the day. This gives me conviction for Long or Short Trades Remember that RVol is not a standalone indicator; it works best when used in conjunction with other technical and fundamental analysis tools. Additionally, RVol's effectiveness may vary across different markets and trading strategies. Therefore, backtesting and validating the use of RVol in your trading approach is essential. Lastly, risk management is crucial in trading. While RVol can provide valuable insights, it cannot guarantee profitable trades. Always use appropriate risk management strategies, such as setting stop-loss levels, and avoid overexposing yourself to the market based solely on RVol readings.
Pine Script® indicator
by ripster47
7
Lune Oscillator Premium⬛️ Overview Lune Oscillator is an advanced and innovative TradingView indicator designed to enhance your market analysis. Rather than merely improving visuals or merging traditional indicators, it introduces a series of unique features, each with its unique value proposition. This script stands out due to its originality, and the significant utility it brings to traders. 🟦 Features Oscillator features an assortment of sophisticated tools aimed at refining your trading strategies: 🔹 Trend Oscillator: This feature integrates market trend and momentum analysis into one dynamic oscillator. It's designed to facilitate market trend and momentum analysis, and is invaluable to traders as it combines both trend and momentum analysis into one tool. For instance, if a ticker shows signs of slowing momentum after a recent rally, the Trend Oscillator could predict a potential trend reversal. The Trend Oscillator’s sensitivity and velocity settings can be tailored to suit your trading style and strategy. It is developed using a custom formula similar to WaveTrend but optimized for better detection of trend and momentum shifts. 🔹 Market Peak: Market Peak identifies potential market peaks and troughs using a percentile-based system. It's aimed at detecting overextensions in the Trend Oscillator, indicating potential market reversals. Compact and user-friendly, this feature signals potential trade exit points in case of an impending market reversal. Its sensitivity can be adjusted to react to either short-term or long-term market changes. By analyzing the market's average move, it detects overbought or oversold conditions when the percentage gets too extreme. 🔹 Money Pulse: The Money Pulse feature serves as a radar for money inflow or outflow, helping users detect nascent trends and reversals. It enables traders to spot early opportunities and reversals and align their strategies with institutional and large players. For example, a bullish Money Pulse during market consolidation could signal money influx and the beginning of an accumulation phase. The sensitivity of the Market Pulse can be adapted to short-term or long-term changes. This feature employs an improved version of the Money Flow concept. 🔹 Liquidity Pulse: Liquidity Pulse provides a unique perspective of asset liquidity by tracking market inflow and outflow volumes. It assists traders in understanding the market's liquidity sentiment, which is particularly useful for long-term trades and confluence. For instance, a bullish Liquidity Pulse could signal abundant liquidity, potentially driving up the price. The sensitivity setting can be adjusted for short-term or long-term liquidity changes. This feature utilizes an enhanced version of the On-Balance Volume concept. 🔹 Institutional Wave: This feature tracks the cumulative inflow and outflow for a specific ticker, helping traders monitor institutional money flows. It enables the analysis of a ticker's accumulation and distribution, assisting in detecting early trade entries and avoiding dumps. For example, a decrease in volume during consolidation after a price rally could indicate sell-off and potential price drop. The Institutional Wave's sensitivity can be adapted to either short-term or long-term changes. It operates on the Accumulation and Distribution concept. 🔹 Power Wave: The Power Wave evaluates market strength and momentum, indicating market power shifts. It helps traders understand the true power behind a market move. For instance, a decreasing Power Wave during a bullish move could indicate a weakening trend, suggesting a bearish strategy instead. The sensitivity of the Power Wave can be set for short-term or long-term market changes. The Power Wave calculates market strength by evaluating price change volatility. 🔹 Market Pressure: This feature detects shifts in buy and sell pressure, signaling potential turning points. It helps traders understand the power balance in the market. For example, a bullish Market Pressure shift during a short trade could suggest a momentum gain by bulls, indicating a trade exit. The Market Pressure's sensitivity can be adjusted for short-term or long-term changes. This feature uses volume data and moving averages to detect market pressure shifts, filtering out false and volatile signals. 🔹 Oscillator Copilot: Incorporating Smart Bias and Reversal Radar, the Oscillator Copilot helps identify market trends and potential reversals. It searches for confluence within multiple Oscillator features, providing a straightforward assistive tool. For example, a bullish Smart Bias signal during a long trade could suggest staying in the trade longer, while a bearish Reversal Radar signal could indicate the need to exit the trade. 🔹 Divergence Detection: This feature offers a sophisticated detection system for both regular and hidden market divergences, providing additional confluence and highlighting hard-to-detect divergences. For instance, a bullish Regular Divergence could signal a potential trade entry or exit depending on your overall market sentiment and bias. This feature uses fractals to effectively detect divergences in the market based on the Trend Oscillator. 🔹 Color Themes: Personalize your charting experience with various color themes. This feature enhances the visual appeal of your chart, offering easy setup and use. For example, use the “Ice” theme for a unique and colorful experience or the “Dark” theme for a more subdued look. Themes available include Default, Light, Dark, and Ice. This feature modifies the colors of your candles and features based on the selected theme.
 These features and tools collectively offer a comprehensive solution for traders to understand and navigate the financial markets. It's important to remember that they are designed to assist in making informed trading decisions and should be used as part of a balanced trading strategy. 🟧 Usage Lune Oscillator's features are designed to be both standalone tools and components of a larger, integrated trading strategy. It is important to understand each feature and experiment with different configurations to best suit your unique trading needs. 🔸 Example #1: The following demonstrates how the Oscillator Copilot can be an excellent trade assistant. The Oscillator Copilot leverages multiple Lune Oscillator features, allowing traders to quickly assess overall market sentiment. It uses Smart Bias and Reversal Radar tools to deliver these insights. For instance, at point 1, a bullish Smart Bias (denoted by a green circle) represents a collective bullish sentiment from multiple components of Lune Oscillator, often leading to a price increase. Conversely, at point 2, we identify two bearish reversal signals from the Reversal Radar (highlighted by red triangles). This convergence of bearish signals from multiple components hints at a potential market reversal, often followed by a gradual price decline. 🔸 Example #2: This example shows how the Market Peak feature can aid in detecting potential market tops and bottoms. Market Peak calculates how overbought or oversold a ticker is using a percentile system, offering insights into potential reversals. At points 1 and 2, we observe bearish Market Peaks suggesting overbought conditions and indicating a possible shift in trend. Subsequent to these peaks, we witness a price drop, mirroring the overbought market conditions. In contrast, at point 3, a bullish Market Peak suggests an oversold market, indicating a potential trend reversal and subsequent price increase. 🔸 Example #3: This is an example of how combining various features such as the Money Pulse, Liquidity Pulse, Institutional Wave, and Market Peak, can help make more informed trades. Money Pulse and Liquidity Pulse provide insights into the money and liquidity flow in the market, respectively, while the Institutional Wave monitors the cumulative volume shifts and changes. Together with Market Peak, they offer a comprehensive view of the market's state. At point 1, the positive Liquidity Wave (crossing above 0) suggests a bullish market volume. At point 2, a bullish Market Pressure indicates an increase in buying pressure, reinforcing the bullish sentiment. At point 3, a negative Liquidity Wave (crossing below 0) indicates a bearish sentiment, suggesting that market participants are exiting their positions. The concurrent Market Pressure hints at an increase in selling activity. Taking all these factors into account provides a strong indicator that the market sentiment has turned bearish. 🟥 Conclusion Lune Oscillator aims to provide a suite of tools that bring unique value to traders. Each feature is designed to offer different, yet complementary, perspectives on the market, allowing users to piece together a more comprehensive understanding of their trading environment. 🔻 Access You can see the Author's instructions below to get instant access to this indicator & our Premium Suite. 🔻 Disclaimer Lune Oscillator is a tool for aiding in market analysis and is not a guarantee of future market performance or individual trading success. We strongly recommend that users combine our tool with their trading strategies and do their due diligence before making any trading decisions. Remember, past performance is not indicative of future results. Please trade responsibly.
Pine Script® indicator
by LuneTrading
Volume-RSI Colored Bars The Volume Indicator, used in conjunction with the embedded Relative Strength Index (RSI), is a powerful tool for making informed trading decisions. Let’s break down how this indicator works and how it can assist you in your trading strategy. Volume Indicator: The Volume Indicator tracks the volume of trades occurring in a specific timeframe. Volume shows the number of shares or contracts traded, which can reveal the strength of a price move. If price is moving higher with increasing volume, it generally confirms that the move has more strength, indicating the potential for continuation. Conversely, if the price is moving lower with increasing volume, it indicates strong bearish momentum. Volume Clusters: In the chart, we can see various volume clusters highlighted in green, red, and grey. The green bars represent high volume, which can signal strong buying pressure. The red bars represent low volume, signaling that selling pressure is low. Grey bars indicate average volume. High Volume (Green Bars): High buying pressure, indicating that there may be a strong move in the direction of the price. Low Volume (Red Bars): Potential signal for a weak move, indicating a lack of participation in the current trend. RSI (Relative Strength Index): RSI is a momentum oscillator that indicates whether a market is overbought or oversold. The RSI ranges from 0 to 100, with readings above 70 suggesting an overbought market and readings below 30 suggesting an oversold market. The RSI is also embedded in the indicator to give a better context when combined with volume. It adds an extra layer of analysis to interpret the price action. How to Use Volume Indicator with RSI: Confirming Breakouts: If you see a breakout in price (an upward movement or downward movement) and the volume indicator shows high volume, this confirms the strength of the breakout. If the RSI also supports the breakout (for example, it is crossing above 50 or above 70 for an uptrend), it further validates the trade. Identifying Reversals: When the price is reaching overbought or oversold levels (RSI above 70 or below 30) and there is low volume (red bars), this may indicate a potential reversal. If the price is oversold and RSI shows values below 30 with increasing volume (green bars), this could signal a potential buying opportunity as a reversal might occur. Volume Divergence: If the price is making new highs, but the volume is declining (red bars), it may signal weakness in the trend, despite the RSI indicating strength. This divergence can help traders anticipate a potential reversal or breakout. Example from the Chart: Strong Buy Signal: The price is making an upward movement, the volume bars are turning green (indicating strong buying pressure), and RSI is rising above 50. Bearish Divergence: You may see RSI moving higher, but volume bars are turning red (indicating weak momentum). This could signal that the upward movement lacks strength, suggesting a potential reversal. By combining these two indicators, the Volume Indicator and the RSI, traders can make more informed decisions on whether the current trend is sustainable, or if a reversal or breakout is likely. In conclusion, using the Volume Indicator and RSI together allows for: Identifying high-volume breakouts and reversals Filtering out weak price movements Confirming trends with volume and momentum This combination enhances trading strategies by providing clear signals of market strength or weakness, helping traders optimize their entry and exit points effectively.
Pine Script® indicator
by ambpips
Multi-Timeframe PSAR Indicator ver 1.0Enhance your trend analysis with the Multi-Timeframe Parabolic SAR (MTF PSAR) indicator! This powerful tool displays the Parabolic SAR (Stop and Reverse) from both the current chart's timeframe and a higher timeframe, all in one convenient view. Identify potential trend reversals and set dynamic trailing stops with greater confidence by understanding the broader market context. Key Features: Dual Timeframe Analysis: Simultaneously visualize the PSAR on your current chart and a user-defined higher timeframe (e.g., see the Daily PSAR while trading on the 1-hour chart). This helps you align your trades with the dominant trend. Customizable PSAR Settings: Fine-tune the PSAR calculation with adjustable Start, Increment, and Maximum values. Optimize the indicator's sensitivity to match your trading style and the volatility of the asset. Independent Timeframe Control: Choose to display either or both the current timeframe PSAR and the higher timeframe PSAR. Focus on the information most relevant to your analysis. Clear Visual Representation: Distinct colors for the current and higher timeframe PSAR dots make it easy to differentiate between the two. Quickly identify potential entry and exit points. Configurable Colors You can easily change colors of Current and HTF PSAR. Standard PSAR Logic: Uses the classic Parabolic SAR algorithm, providing a reliable and widely-understood trend-following indicator. lookahead=barmerge.lookahead_off used in the security function, there is no data leak or repainting. Benefits: Improved Trend Identification: Spot potential trend changes earlier by observing divergences between the current and higher timeframe PSAR. Enhanced Risk Management: Use the PSAR as a dynamic trailing stop-loss to protect profits and limit potential losses. Greater Trading Confidence: Make more informed decisions by considering the broader market trend. Reduced Chart Clutter: Avoid the need to switch between multiple charts to analyze different timeframes. Versatile Application: Suitable for various trading styles (swing trading, day trading, trend following) and markets (stocks, forex, crypto, etc.). How to Use: Add to Chart: Add the "Multi-Timeframe PSAR" indicator to your TradingView chart. Configure Settings: PSAR Settings: Adjust the Start, Increment, and Maximum values to control the PSAR's sensitivity. Multi-Timeframe Settings: Select the desired "Higher Timeframe PSAR" resolution (e.g., "D" for Daily). Enable or disable the display of the current and/or higher timeframe PSAR using the checkboxes. Interpret Signals: Current Timeframe PSAR: Dots below the price suggest an uptrend; dots above the price suggest a downtrend. Higher Timeframe PSAR: Provides context for the overall trend. Agreement between the current and higher timeframe PSAR strengthens the trend signal. Divergences may indicate potential reversals. Trade Management: Use PSAR dots as dynamic trailing stop. Example Use Cases: Confirming Trend Strength: A trader on a 1-hour chart sees the 1-hour PSAR flip bullish (dots below the price). They check the MTF PSAR and see that the Daily PSAR is also bullish, confirming the strength of the uptrend. Identifying Potential Reversals: A trader sees the current timeframe PSAR flip bearish, but the higher timeframe PSAR remains bullish. This divergence could signal a potential pullback within a larger uptrend, or a warning of a more significant reversal. Trailing Stops: A trader enters a long position and uses the current timeframe PSAR as a trailing stop, moving their stop-loss up as the PSAR dots rise. Disclaimer: The Parabolic SAR is a lagging indicator and may produce false signals, especially in ranging markets. It is recommended to use this indicator in conjunction with other technical analysis tools and risk management strategies. Past performance is not indicative of future results.
Pine Script® indicator
by fenyesk
RSI Divergence + Sweep + Signal + Alerts Toolkit [TrendX_]The RSI Toolkit is a powerful set of tools designed to enhance the functionality of the traditional Relative Strength Index (RSI) indicator. By integrating advanced features such as Moving Averages, Divergences, and Sweeps, it helps traders identify key market dynamics, potential reversals, and newly-approach trading stragies. The toolkit expands on standard RSI usage by incorporating features from smart money concepts (Just try to be creative 🤣 Hope you like it), providing a deeper understanding of momentum, liquidity sweeps, and trend reversals. It is suitable for RSI traders who want to make more informed and effective trading decisions. 💎 FEATURES RSI Moving Average The RSI Moving Average (RSI MA) is the moving average of the RSI itself. It can be customized to use various types of moving averages, including Simple Moving Average (SMA), Exponential Moving Average (EMA), Relative Moving Average (RMA), and Volume-Weighted Moving Average (VWMA). The RSI MA smooths out the RSI fluctuations, making it easier to identify trends and crossovers. It helps traders spot momentum shifts and potential entry/exit points by observing when the RSI crosses above or below its moving average. RSI Divergence RSI Divergence identifies discrepancies between price action and RSI momentum. There are two types of divergences: Regular Divergence - Indicates a potential trend reversal; Hidden Divergence - Suggests the continuation of the current trend. Divergence is a critical signal for spotting weakness or strength in a trend. Regular divergence highlights potential trend reversals, while hidden divergence confirms trend continuation, offering traders valuable insights into market momentum and possible trade setups. RSI Sweep RSI Sweep detects moments when the RSI removes liquidity from a trend structure by sweeping above or below the price at key momentum level crossing. These sweeps are overlaid on the RSI chart for easier visualized. RSI Sweeps are significant because they indicate potential turning points in the market. When RSI sweeps occur: In an uptrend - they suggest buyers' momentum has peaked, possibly leading to a reversal; In a downtrend - they indicate sellers’ momentum has peaked, also hinting at a reversal. (Note: This feature incorporates Liquidity Sweep concepts from Smart Money Concepts into RSI analysis, helping RSI traders identify areas where liquidity has been removed, which often precedes a trend reversal) 🔎 BREAKDOWN RSI Moving Average How MA created: The RSI value is calculated first using the standard RSI formula. The MA is then applied to the RSI values using the trader’s chosen type of MA (SMA, EMA, RMA, or VWMA). The flexibility to choose the type of MA allows traders to adjust the smoothing effect based on their trading style. Why use MA: RSI by itself can be noisy and difficult to interpret in volatile markets. Applying moving average would provide a smoother, more reliable view of RSI trends. RSI Divergence How Regular Divergence created: Regular Divergence is detected when price forms HIGHER highs while RSI forms LOWER highs (bearish divergence) or when price forms LOWER lows while RSI forms HIGHER lows (bullish divergence). How Hidden Divergence created: Hidden Divergence is identified when price forms HIGHER lows while RSI forms LOWER lows (bullish hidden divergence) or when price forms LOWER highs while RSI forms HIGHER highs (bearish hidden divergence). Why use Divergence: Divergences provide early warning signals of a potential trend change. Regular divergence helps traders anticipate reversals, while hidden divergence supports trend continuation, enabling traders to align their trades with market momentum. RSI Sweep How Sweep created: Trend Structure Shift are identified based on the RSI crossing key momentum level of 50. To track these sweeps, the indicator pinpoints moments when liquidity is removed from the Trend Structure Shift. This is a direct application of Liquidity Sweep concepts used in Smart Money theories, adapted to RSI. Why use Sweep: RSI Sweeps are created to help traders detect potential trend reversals. By identifying areas where momentum has exhausted during a certain trend direction, the indicator highlights opportunities for traders to enter trades early in a reversal or continuation phase. ⚙️ USAGES Divergence + Sweep This is an example of combining Devergence & Sweep in BTCUSDT (1 hour) Wait for a divergence (regular or hidden) to form on the RSI. After the divergence is complete, look for a sweep to occur. A potential entry might be formed at the end of the sweep. Divergences indicate a potential trend change, but confirmation is required to ensure the setup is valid. The RSI Sweep provides that confirmation by signaling a liquidity event, increasing the likelihood of a successful trade. Sweep + MA Cross This is an example of combining Devergence & Sweep in BTCUSDT (1 hour) Wait for an RSI Sweep to form then a potential entry might be formed when the RSI crosses its MA. The RSI Sweep highlights a potential turning point in the market. The MA cross serves as additional confirmation that momentum has shifted, providing a more reliable and more potential entry signal for trend continuations. DISCLAIMER This indicator is not financial advice, it can only help traders make better decisions. There are many factors and uncertainties that can affect the outcome of any endeavor, and no one can guarantee or predict with certainty what will occur. Therefore, one should always exercise caution and judgment when making decisions based on past performance.
Pine Script® indicator
by TrendX_
6
Sash Trending Suite NEWWhy The " Sash Trending Suite " (STS) indicator simplifies trading by highlighting market trends and potential reversals. In a world of complex charts and overwhelming data, STS helps traders quickly understand market direction and make informed decisions. --- How and What STS combines key technical tools into one easy-to-read indicator, directly showing important signals on the chart: Macro Trend Detection How : Uses two EMAs (fast and slow) and the ADX to identify strong bullish or bearish trends. What to Look For : Bar Colors : Green Bars : Indicate a strong upward (bullish) trend. Red Bars : Indicate a strong downward (bearish) trend. Benefit : Quickly see the overall market direction. Alpha Track Line How : An adaptive EMA that acts as a dynamic support or resistance line. What to Look For : Line Colors : Green Line : Price is above the line (bullish momentum). Red Line : Price is below the line (bearish momentum). Benefit : Visualize momentum shifts easily. Reversal Signals How : Combines RSI with price action to spot potential market reversals. What to Look For : "R" Labels : Turquoise "R" Below Bar : Potential bullish reversal. Amber "R" Above Bar : Potential bearish reversal. Benefit : Identify possible turning points for entry or exit. Micro Trend Detection How : Uses shorter EMAs to catch minor trend changes. What to Look For : Small Circles : Green Circle Below Bar : Micro bullish signal. Red Circle Above Bar : Micro bearish signal. Benefit : Spot short-term trend shifts promptly. Alerts How : Built-in alerts notify you of key events. What to Expect : Trend Changes : Alerts when a new bullish or bearish trend starts. Reversals : Alerts for potential bullish or bearish reversals. Benefit : Stay updated without constantly watching the chart. --- Summary The "Sash Trending Suite" provides: Simplified Analysis : One indicator shows trend direction, momentum, reversals, and micro trends. Clear Visuals : Color-coded bars and symbols make interpretation easy. Timely Alerts : Know about important market changes instantly. By focusing on essential signals and displaying them clearly, STS helps traders navigate the market with confidence and simplicity.
Pine Script® indicator
by MITAK
Consecutive Beta with Dynamic Support Resistance [TrendX_]The Consecutive Beta with Dynamic Support Resistance indicator is tailored to harness trend momentum, recognize top & bottom reversals, and leverage dynamic support and resistance levels. This indicator introduces a new approach by combining the concepts of beta, consecutive counting mechanisms, and the supertrend structure, making it a fresh tool for understanding market trends and patterns. 💎 KEY FEATURES Candle’s Relative Valuation Using Beta: The core of the TrendX indicator lies in using beta to gauge volatility. Beta serves as a measure of how an asset moves relative to the broader market, helping traders understand whether the asset is more or less volatile in different market conditions. Counting Techniques for Momentum & Reversals: By employing counting techniques to reach a significant threshold, the indicator can measure trend momentum and spot top/bottom reversals. Dynamic Support & Resistance: This feature relies on consecutive beta counting to dynamically adapt support and resistance levels. These levels are key in predicting potential entry and exit points following the general trend direction. ⚙️ USAGES Initial Start and Distance: Customize the initial start point and distance for better control over trading strategies. For instance, starting at 1 and using an even distance of 2 will yield odd consecutive counting series; Phase 1 Completion for Reversal Strategies: This initial phase focuses on identifying short-term reversals; Phase 2 Completion for Support/Resistance: A support level forms after completing two bullish phases, while a resistance level forms after completing two bearish phases. This structure helps in clarifying trend directions when breakout these key levels. 🔎 BREAKDOWN Phase 1: The indicator counts consecutive candles that show a higher Beta than in previous periods over a given length. The completion of countings only succeed when the whole series is uninterruptedly counted, or else countings will be canceled. This strict adherence to consecutive counts serves to ensure that only strong, sustained momentum is recognized and also helps filter out noise, weak signals and establish the initial direction catalyst, setting up for further trend analysis. Phase 2: After Phase 1 ends, the Phase 2 counting mechanism begins. This phase focuses on bottom reversals through consecutive higher beta candles, and top reversals by counting lower beta candles. At this stage, interuptions will not cancel the counting process. The ability to continue counting in Phase 2 allows for a broader perspective on market behavior. Even if individual candles do not consistently meet the criteria for consecutive counts, the cumulative effect of higher or lower beta readings over time provides valuable insights into market sentiment and trend direction. Dynamic Support & Resistance: After Phase 2 completion, if the average of high, low, and close surpasses both recent support and resistance levels from Phase 2, an uptrend is confirmed, which the support level is displayed. If it drops below these levels, a downtrend is indicated, where resistance is displayed instead of support. The result is displayed through a colored supertrend-line (teal for uptrend, red for downtrend). DISCLAIMER This indicator is not financial advice, it can only help traders make better decisions. There are many factors and uncertainties that can affect the outcome of any endeavor, and no one can guarantee or predict with certainty what will occur. Therefore, one should always exercise caution and judgment when making decisions based on past performance.
Pine Script® indicator
by TrendX_
Enhanced Overbought/Oversold IndicatorEnhanced Overbought/Oversold Indicator Description: The Enhanced Overbought/Oversold Indicator is a custom technical analysis tool designed to identify potential reversal points in the market by highlighting conditions of overbought and oversold levels on any timeframe. This indicator is based on the Relative Strength Index (RSI), a momentum oscillator that measures the speed and change of price movements. Features: Overbought & Oversold Levels: Overbought (RSI > 70): Indicates that the market is potentially overvalued and might be due for a pullback. The candles are highlighted in Red to signal caution. Oversold (RSI < 30): Indicates that the market is potentially undervalued and might be due for a bounce. The candles are highlighted in Green to signal potential buying opportunities. Extreme Conditions: Extreme Overbought (RSI > 85): Indicates an extremely overbought condition, suggesting a very high likelihood of a reversal or correction. The candles are highlighted in Blue. Extreme Oversold (RSI < 15): Indicates an extremely oversold condition, suggesting a strong potential for a reversal upwards. The candles are highlighted in Yellow. Dynamic Highlighting: The indicator dynamically adjusts the candle colors based on the current RSI value, providing a clear visual representation of market conditions. Applications: Trend Reversals: By identifying extreme RSI levels, the indicator helps traders anticipate possible trend reversals. Entry & Exit Points: Traders can use the highlighted signals to make more informed decisions about entering or exiting trades. Risk Management: The color-coded signals can be used to manage risk, especially during extreme market conditions. This indicator is particularly useful for traders looking for a straightforward visual representation of market conditions across different timeframes. By combining standard and extreme RSI levels, it helps identify not just overbought and oversold conditions but also extreme levels where significant reversals are more likely.
Pine Script® indicator
by lukespencer
1