The BLUE Red Candle Swing w AlertsThe script is for high probability swing entries based on a extremely strong bearish candles which typically come right before a green push up.
When a bearish candle has a higher than average ATR, it is a sign that there could be a large reversal coming next.
Use this indicator to help you set the stop loss and take profit based on the range of the highlighted Red candle.
*So if the ATR of this candle is $3.00 then set a $3.00 stop loss and take profit.
There is also a sc
Rules for the ATR RED/Blue Impulse candle
*Use the 50% line or midline of the candle to help refine your entries
*Use the range of the Blue candle as your stop loss range and for your 1st take profit target!
*Add more positions if there is a clear trend after the candle
Volatility
The SHIFT - Signal Harmonic Inflection Flow Tracker🔄 THE SHIFT — SIGNAL HARMONIC INFLECTION FLOW TRACKER
Precision reversal detection at the exact moment price shifts direction.
📐 CORE CONCEPT: THE INFLECTION POINT
Every sustained price move begins with a single moment — the instant price crosses from one phase to another. THE SHIFT captures this exact inflection point by combining two essential confirmations:
1. The Phase Cross
Price crossing the EMA ribbon midpoint represents a structural change in market bias. The ribbon midpoint is calculated as the average of EMA 21 and EMA 55, creating a dynamic equilibrium zone. When price decisively crosses this level, it signals a potential phase transition.
2. The Confirming Wick
Not every ribbon cross leads to continuation. THE SHIFT filters for quality by requiring the crossing candle to show directional commitment through its wick structure:
✓ Bullish SHIFT: Lower wick ≥ 25% of bar range (buyers absorbed selling pressure)
✓ Bearish SHIFT: Upper wick ≥ 25% of bar range (sellers absorbed buying pressure)
This dual confirmation eliminates weak crosses that occur during sideways chop.
⚙️ HOW IT WORKS
The EMA Ribbon
Five exponential moving averages (8, 13, 21, 34, 55) form an adaptive ribbon that expands during trends and contracts during consolidation. The ribbon serves multiple purposes:
✓ Visual trend identification through color gradient
✓ Dynamic support/resistance zones
✓ Phase boundary definition via ribbon midpoint
Phase Detection
The indicator tracks three distinct market phases:
✓ VELOCITY BULLISH — Price confirmed above ribbon midpoint
✓ VELOCITY BEARISH — Price confirmed below ribbon midpoint
✓ EQUILIBRIUM — Price oscillating around midpoint without confirmation
Phase confirmation requires price to remain on one side of the ribbon for a user-defined number of bars (default: 2), preventing false signals from single-bar noise.
Market Pressure Index (MPI)
MPI quantifies the balance between buying and selling pressure within each bar by analyzing where price closes relative to its range, weighted by volume. This provides momentum context for phase transitions:
✓ Positive MPI confirms bullish pressure
✓ Negative MPI confirms bearish pressure
✓ Strong readings (above threshold) indicate conviction
Consensus Grading System
Each SHIFT signal receives a quality grade (A+, A, B, C) based on five factors:
✓ Phase Strength — EMA alignment plus MPI strength
✓ Trend Alignment — All EMAs properly stacked
✓ Volume Confirmation — Above-average participation
✓ Momentum Convergence — MPI confirms direction
✓ Structure Respect — Price at value area
Higher grades indicate stronger confluence and potentially higher-probability setups.
📊 VISUAL SYSTEM
SHIFT Labels
✓ ▲ SHIFT — Bullish phase flip detected
✓ ▼ SHIFT — Bearish phase flip detected
Labels appear at the exact bar where the phase transition occurs.
Entry Zones
When a qualified SHIFT fires, a colored box appears showing:
✓ Entry zone boundaries
✓ Signal direction (LONG/SHORT)
✓ Wick percentage that triggered the signal
✓ Quality grade
Dynamic Trade Management
THE SHIFT tracks three profit targets (T1, T2, T3) and stop levels with intelligent visual feedback:
✓ Target Lines — Display as dashed lines during active trade
✓ Target Hit — Line turns GREEN with "✓ T1/T2/T3" label
✓ Target Fade — Hit targets progressively fade and disappear after user-defined bars
✓ Stop Hit — Line turns RED with "❌ STOPPED OUT" label
This visual system keeps your chart clean while providing clear feedback on trade progress.
Background Shading
Subtle background color indicates current phase:
✓ Green tint — Bullish phase
✓ Red tint — Bearish phase
✓ Yellow tint — Equilibrium
🧠 SHIFT ASSISTANT — INTELLIGENT COACHING PANEL
The SHIFT Assistant provides real-time contextual guidance that adapts to market conditions:
MARKET READ
Current market assessment:
✓ "💪 Strong bullish trend in play"
✓ "📈 Bullish momentum building"
✓ "🔥 Compression detected - breakout imminent"
✓ "⚖️ Equilibrium - wait for SHIFT"
ACTION
Specific guidance for current situation:
✓ "🟢 SHIFT LONG - Wick confirmed buyers"
✓ "📊 Halfway to T1 - Hold with conviction"
✓ "✅ T1 Hit - Consider partials, move stop to entry"
✓ "👀 Bullish shift but weak wick - skip"
✓ "⏸️ No setup - Patience pays"
CAUTION
Risk warnings when applicable:
✓ "⚠️ Bearish divergence forming - caution on new longs"
✓ "🌊 Volatility expanding - widen mental stops"
INSIGHT
Additional observations:
✓ "✨ Perfect bullish SHIFT setup"
✓ "📊 EMAs fully stacked - trend mature"
✓ "💎 Grade A+ conditions"
TRADE STATUS
When in an active trade:
✓ Current P&L percentage
✓ Bars in trade
✓ Risk buffer remaining (ATR to stop)
📋 MAIN DASHBOARD
The dashboard displays comprehensive real-time information:
Phase Status
✓ Current phase (Velocity Bullish/Bearish/Equilibrium)
✓ Phase strength (Strong/Moderate/Weak)
✓ MPI reading
Consensus Breakdown
✓ Visual progress bar showing consensus score
✓ Individual check status for all five factors
✓ Current quality grade
Wick & Shift Status
✓ Current wick type and percentage
✓ Whether a SHIFT is occurring on current bar
Three Laws Display
✓ Law 1: Direction (SHIFT BULL/BEAR or No Shift)
✓ Law 2: Confirmation (Wick Confirms or Weak Wick)
✓ Law 3: Quality (Grade passes filter or not)
All three laws must be satisfied for a signal to fire.
⚙️ INPUT PARAMETERS
SHIFT Core Engine
✓ MPI Period (14) — Lookback for Market Pressure Index calculation
✓ MPI Sensitivity (1.5) — Amplification factor for pressure readings
✓ Phase Confirmation Bars (2) — Bars required on one side of ribbon to confirm phase
✓ Strong Momentum Threshold (0.5) — MPI level considered "strong"
EMA Ribbon
✓ Show EMA Ribbon — Toggle ribbon visibility
✓ EMA Fast/2/Core/4/Slow (8/13/21/34/55) — Individual EMA periods
Signal Settings
✓ Show Signals — Toggle signal generation
✓ Minimum Signal Grade (B) — Filter signals below this quality threshold
✓ Min Wick Ratio (0.25) — Minimum wick size as percentage of bar range to confirm shift
✓ Show Entry Zones/Stops/Targets — Toggle visual elements
✓ Stop Loss ATR (1.5) — Stop distance in ATR multiples
✓ Zone Width (15) — How many bars entry zones extend forward
✓ Target Fade Duration (8) — Bars before hit targets disappear
Assistant & Dashboard
✓ Position and size options for both panels
✓ Independent show/hide toggles
Visual
✓ Customizable colors for bullish, bearish, neutral, target hit, and stop hit
✓ Background and label transparency controls
🎯 RECOMMENDED USAGE
Best Timeframes
✓ 5-minute to 1-hour for intraday trading
✓ 4-hour to Daily for swing trading
✓ Adjust Min Wick Ratio lower (0.20) on higher timeframes where wicks tend to be smaller
Best Markets
✓ Liquid instruments with clear trending behavior
✓ Futures, Forex, and large-cap equities
✓ Avoid during major news events when price action becomes erratic
Signal Filtering
✓ Grade A+ and A signals have highest confluence
✓ Grade B signals are acceptable with additional confirmation
✓ Grade C signals should generally be skipped
✓ Use the Assistant's ACTION guidance to understand why signals fire or don't fire
Trade Management
✓ T1 at 1× risk (1:1 R) — Consider taking partials
✓ T2 at 2× risk (2:1 R) — Move stop to breakeven
✓ T3 at 3× risk (3:1 R) — Full target, close remaining position
✓ Watch for phase invalidation (opposite SHIFT) as hard stop signal
🔔 ALERTS
THE SHIFT includes comprehensive alert conditions:
✓ SHIFT Long — Bullish entry signal
✓ SHIFT Short — Bearish entry signal
✓ T1/T2/T3 Hit — Target reached notifications
✓ Stopped Out — Stop level breached
✓ Shift Bullish/Bearish — Phase flip events (with or without trade signal)
Dynamic alerts include grade and wick percentage information for complete context.
📝 DEVELOPMENT NOTES
THE SHIFT emerged from extensive research into what makes reversal signals reliable versus unreliable. The key insight was that most failed reversals lack wick confirmation — the candle crosses a level but shows no evidence that the opposing force actually stepped in.
By requiring both the structural cross (price through ribbon midpoint) AND the wick confirmation (evidence of absorption), THE SHIFT filters out the low-quality signals that plague simpler crossover systems.
The intelligent Assistant panel was designed to function as a trading coach, helping traders understand not just WHEN to trade but WHY conditions are or aren't favorable. This educational component helps develop intuition over time.
⚠️ RISK DISCLAIMER
This indicator is a technical analysis tool designed to identify potential trading opportunities. It does not guarantee profits and should not be used as the sole basis for trading decisions.
Past performance of any trading system or methodology is not necessarily indicative of future results. Trading involves substantial risk of loss and is not suitable for all investors.
Always use proper risk management, position sizing appropriate to your account, and never risk more than you can afford to lose. Paper trade any new system extensively before committing real capital.
The developer makes no claims about win rates, profit factors, or expected returns. Your results will vary based on market conditions, timeframe selection, and execution.
🎯 SUMMARY
THE SHIFT provides a unified approach to reversal detection:
✓ Simple Logic — Phase cross + wick confirmation = signal
✓ Quality Grading — Consensus scoring filters for best setups
✓ Visual Clarity — Dynamic trade management keeps charts clean
✓ Intelligent Coaching — Assistant explains market conditions in real-time
✓ Complete System — Entry, targets, stops, and management in one indicator
One objective. One system. Catch the shift.
"The market speaks in inflection points. THE SHIFT translates."
Taking you to school. — Dskyz , Trade with insight. Trade with anticipation.
Shadow Corp's MNQ Stop & Size HUD## MNQ Stop & Size HUD
### What It Does
This indicator tells you exactly how wide your stop-loss needs to be—and how many contracts to trade—based on real-time market volatility and your intended hold time.
No more guessing. No more getting wicked out by noise right before price moves your way.
---
### The Problem It Solves
You take a trade with a solid thesis. Price moves against you temporarily, tags your stop, then immediately rips in your original direction. Sound familiar?
This happens because most traders set stops based on arbitrary levels or fixed point values—not on what the market is actually doing right now.
This indicator uses proprietary volatility modeling calibrated on extensive MNQ tick data to calculate the stop distance that gives you the best chance of staying in your trade while noise plays out.
---
### What You See
A clean 3-line HUD in the corner of your chart:
| HORIZON | STOP | SIZE |
|---------|------|------|
| 15m | 38 pts | 6 ctr |
| 30m | 54 pts | 4 ctr |
- **15m**: Stop size for quick scalps and impulse plays
- **30m**: Stop size for rotations to the next level
- **SIZE**: Max contracts based on your risk budget
Updates every bar based on current conditions.
---
### How It Works
The indicator analyzes multiple layers of volatility:
1. **Real-time noise** — What's happening right now, bar by bar
2. **Recent baseline** — Yesterday's typical price action
3. **Historical context** — Multi-week behavioral patterns
4. **Daily regime detection** — Whether today is running hot, normal, or quiet
These inputs feed a proprietary model that outputs the stop distance calibrated to your chosen survival probability (70%, 80%, 90%, or 95%).
Higher survival % = wider stops = fewer noise stop-outs.
---
### How To Apply It
**Before you enter:**
1. Decide your hold time—15 minutes (scalp) or 30 minutes (rotation)
2. Look at the corresponding stop size
3. Use the **larger** of the HUD stop or your technical level (structure, VAL, swing)
4. The contract count is already sized to your risk budget
**Example:**
- You're targeting a rotation to VAH, expecting ~30 minute hold
- HUD shows 30m = 52 pts, 4 contracts
- Your technical stop (below the swing) is only 30 pts away
- Use 52 pts—because that's what the market needs to not wick you out
- 4 contracts × 52 pts × $2 = $416 risk (within your $500 budget)
**Go/No-Go Filter:**
If your target is closer than 1.5× the required stop, skip the trade. The R:R doesn't justify the risk.
---
### Requirements
- Run on **1-minute chart** (MNQ or NQ)
- Needs ~20 trading days of history to fully calibrate
- Set your risk budget in the inputs (default $500)
---
### What This Isn't
This isn't an entry signal. It doesn't tell you when to trade or which direction.
It tells you **how to structure the trade once you've decided to take it**—so you stop getting stopped out by noise on trades that would have worked.
ATR Volatility Impulse Candles (Bull & Bear)This indicator highlights unusually strong momentum candles using ATR as a volatility filter. Treyding Stocks was the inspiration behind this powerful swing indicator!
A candle is marked only when its body is larger than the Average True Range, meaning price moved farther than normal for that timeframe. This filters out noise and focuses attention on candles that often matter most.
Lime green candles represent strong bullish impulse. They occur when price closes above the open and the candle body is larger than ATR. These candles often show aggressive buying, late-stage momentum, or exhaustion before a reversal.
Blue candles represent strong bearish impulse. They occur when price closes below the open and the candle body is larger than ATR. These candles often signal aggressive selling, liquidation, stop runs, or breakdown confirmation.
The indicator includes alerts for both bullish and bearish impulse candles, allowing traders to monitor multiple charts without watching them constantly.
Traders commonly use this tool to identify momentum exhaustion, reversal zones, and high-impact candles near VWAP, key moving averages, or important price levels. It works on any timeframe, does not repaint, and is designed to keep the chart clean while highlighting only the most meaningful price moves.
The Red (Blue) candle is very useful for swings especially on the Daily chart
*When the Blue (RED) candle appears, mark the high/low, and enter when the next candle breaks /closes above it.
QSS v15.0 [Omni-Engine]# **QSS v15.0 | Institutional Quant System**
### **💎 The Only Indicator You Will Ever Need**
**QSS (Quantitative Signal System) v15.0** is an all-in-one algorithmic trading engine designed to solve the biggest problem in trading: **fragmentation.** Instead of cluttering your chart with 10 different indicators (RSI, MACD, Bollinger Bands, Order Blocks, SuperTrend, etc.), QSS synthesizes them all into a single, high-probability decision engine.
This is not just a "Buy/Sell" indicator. It is a complete **Institutional Trading Suite** that combines "Smart Money Concepts" (SMC) with quantitative trend analysis and dynamic risk management.
---
### **🚀 Key Features**
#### **1. Dual-Core Signal Engine**
Choose your weapon based on the asset class and volatility:
* **Engine A: SuperTrend (Classic):** The industry standard for capturing major trends. Best for Swing Trading and Stocks.
* **Engine B: OTT (Optimized Trend Tracker):** A faster, volatility-adaptive engine derived from VIDYA (Variable Index Dynamic Average). Best for Crypto and Scalping.
#### **2. Institutional Intelligence (SMC)**
* **Volumized Order Blocks (SMC):** Automatically detects Supply (Red Box) and Demand (Green Box) zones based on pivot volume.
* *Smart Filter:* The system will **BLOCK** Buy signals if price is running straight into a Bearish Order Block (Resistance).
* **Koncorde (Smart Money Flow):** Analyzes PVI (Positive Volume Index) vs. NVI (Negative Volume Index) to track "Sharks" (Institutions) vs. "Minnows" (Retail).
* *Smart Filter:* Signals are only generated if Institutional Money Flow supports the direction.
#### **3. The "Power 3" Confirmation Suite**
Includes optional filters for the classic trinity of technical analysis:
* **MACD:** Ensures momentum alignment.
* **Stochastic:** Prevents buying at overbought peaks.
* **Bollinger Bands:** Ensures trades only occur during volatility expansion (Squeeze breakout).
#### **4. Advanced Noise Filtering**
* **ADX Trend Strength:** Blocks signals during "dead" or choppy markets (ADX < 20).
* **Candle Stability Index:** Ignores "wicky" candles and indecision dojis, preventing fake-outs.
* **Trend Ribbon:** A dual-SMA cloud (21/34) that ensures you are always on the right side of the macro trend.
#### **5. Dynamic Risk Management (R:R)**
* Automatically calculates **Stop Loss** and **Take Profit** targets based on market volatility (ATR).
* **TP1 (1:1):** Secure profit / Move stops to breakeven.
* **TP2 (1:2):** Standard target.
* **TP3 (1:3):** Trend runner.
* *Visuals:* Draws clear entry, stop, and target lines on the chart when a trade is active.
#### **6. Pro Dashboard**
A dynamic panel that monitors:
* **Trend Status:** (Bullish/Bearish)
* **Market State:** (Trending/Parabolic/Ranging)
* **Smart Money:** (Accumulating/Distributing)
* **Live Trade Data:** Real-time entry price and targets when a position is open.
---
### **🛠️ Settings Guide**
**🔥 SIGNAL ENGINE**
* **Strategy Engine:** Toggle between `SuperTrend` (Safe) or `OTT` (Fast).
**🧱 ORDER BLOCK FILTER**
* **Respect Order Blocks:** If checked, the system will not Buy into Resistance or Sell into Support.
* **Show OB Zones:** Toggles the visible Red/Green boxes on the chart.
**📊 QUANT FILTERS**
* **Smart Money (Sharks):** Requires Volume data. Filters out "Retail Traps."
* **ADX (Trend Strength):** Set to `20` for standard filtering. Set to `15` for aggressive scalping.
* **Candle Stability:** Filters out candles with long wicks. Essential for volatile Altcoins.
**📈 CLASSIC INDICATORS**
* **MACD / Stoch / BB:** Enable these if you want strict confluence. (Note: Enabling all will result in fewer, but higher precision signals).
**🛡️ RISK MANAGEMENT**
* **ATR Length:** Sensitivity of the volatility calculation.
* **SL Multiplier:** Distance of Stop Loss (Default 2.0x ATR for Crypto).
* **TP Multipliers:** Adjust your Risk:Reward ratios here.
---
### **💡 How to Trade with QSS v15**
1. **The Setup:**
* Wait for a **"BUY"** or **"SELL"** label to appear.
* Ensure the **Trend Ribbon** (Cloud) matches the signal color.
* Check the **Dashboard**: Ensure "Smart Money" is in your favor (Accumulation for Buys).
2. **The Execution:**
* Enter at the **Entry Price** shown on the chart.
* Place your Stop Loss at the **Red Line**.
* Take partial profits at the **Blue Dotted Lines** (TP1/TP2).
3. **Troubleshooting (Debug Mode):**
* If you see the SuperTrend/OTT flip colors but **NO signal** appears, turn on **"🔧 Debug Mode"** in the settings.
* Grey labels will appear on the chart explaining exactly *why* the trade was rejected (e.g., "⛔ REJECTED: Hitting OB Resistance" or "⛔ REJECTED: Low ADX").
---
**Disclaimer:**
*This indicator is a tool for analysis, not financial advice. It combines multiple quantitative metrics to provide high-probability setups, but no system is 100% accurate. Always use proper risk management.*
**Credits:**
* OTT Logic based on Anıl Özekşi.
* Koncorde Logic based on Blai5.
* SMC Order Block logic adapted from FluxCharts concepts.
* Synthesized and Optimized by rayu8.
MEGA Sector Rotation CRYPTOCAP - 7 Narrativas 5m### MEGA Sector Rotation CRYPTOCAP - 7 Narratives
**Description for publishing on TradingView:**
This advanced indicator lets you visualize in real time the **rotation of narratives** within the crypto market through 7 key sectors, normalized for perfect side-by-side comparison.
Each line represents the **historical relative strength** (min-max normalization over 5000 bars) of a specific narrative, based on TradingView's official aggregated market caps (CRYPTOCAP) and custom sums. The lines oscillate between 0 and 100, with clear crossovers signaling when a sector is gaining or losing momentum relative to the others.
**The 7 narratives included:**
1. **Layer1** (pink) – Aggregated market cap of major Layer 1 blockchains.
2. **Memecoins** (bright green) – Official MEME.C sector (PEPE, SHIB, WIF, BONK, etc.).
3. **AI** (orange) – Artificial Intelligence and Big Data narrative.
4. **Exchanges** (purple) – Exchange tokens (centralized and decentralized).
5. **DeFi Total** (cyan) – Full aggregated market cap of the DeFi ecosystem.
6. **RWA Custom** (brown) – Custom sum of Real World Assets: ONDO + LINK + CFG + SYRUP.
7. **Privacy** (dark orange) – Custom sum of privacy coins: XMR + ZEC + DASH.
**Quick interpretation:**
- Line >80 and rising → Narrative is **HOT** (strong bullish rotation).
- Line <20 → Narrative is **COLD** (losing strength).
- Bullish crossovers → Money rotating into that sector.
- Transparent fills between lines to highlight leadership zones.
**Features:**
- Optimized for **lower timeframes** (5m, 15m, 1H, 4H) → ideal for day trading and scalping narratives.
- Works on any TF thanks to 5-minute resolution data.
- Thick lines, vibrant colors, and horizontal references (20/50/80) for instant reading.
Perfect for spotting early which narrative is attracting capital flows and anticipating sector moves in the crypto market.
Add this indicator and trade rotations like a pro!
#crypto #sectorrotation #narratives #altcoins #tradingview
Kaisen London Sweep Reversal (VALID) + MSS Close )Kaisen London Reversal – Liquidity & MSS Strategy
The Kaisen London Reversal indicator is designed to identify high-probability reversals after liquidity sweeps during the London session, using precise market structure confirmation and fixed risk parameters.
🔹 Core Logic
London Session Range
Automatically marks the London High and London Low built between 03:00 – 09:15 New York time.
Liquidity Sweep Filter
A setup is only valid if price takes the London High or Low.
Sweeps exceeding a predefined maximum distance are ignored to avoid trend continuation traps.
Market Structure Shift (MSS)
Entry is triggered only after a confirmed MSS, defined by a candle close back inside the London range, signaling a potential reversal.
Session-Based Execution
Trades are taken exclusively during the New York Open window (09:30 – 10:30 NY time) to ensure sufficient volatility and follow-through.
🔹 Trade Management
Stop Loss: Fixed at 40 points, designed to absorb post-sweep volatility.
Take Profit: Automatically set to the opposite side of the London range, targeting full mean reversion.
Risk Profile: Optimized for asymmetric R:R, allowing a single winning trade to offset multiple losses.
🔹 Visual Features
Clean horizontal lines for:
London High
London Low
Clearly defined TP and SL boxes using standard TradingView-style coloring:
Green for Take Profit
Red for Stop Loss
Minimalistic design focused on price action and structure, avoiding unnecessary clutter.
🔹 Best Use Case
Ideal for scalping and intraday traders
Optimized for lower timeframes (15s – 1m) where liquidity behavior and micro-structure are most visible
Particularly effective in prop firm environments, where drawdown control and high R-multiple trades are essential
Multi MA-MTF + ATRMulti MA-MTF + ATR is a lightweight, flexible moving-average toolkit built for clean charting and multi-timeframe context.
Key Features
Up to 10 Moving Averages (SMA / EMA / RMA / WMA / VWMA / HMA)
Per-MA controls:
Enable/disable
Type, Length, Source
Color + Width
MTF mode
Project to LTF: display a higher-timeframe MA on lower timeframes (example: show the 1H MA directly on the 5m/15m chart)
Only on that TF: show the MA only when the chart timeframe matches the selected TF
Confirmed option for higher-timeframe values (helps avoid repaint-like behavior by holding the last confirmed HTF value)
ATR Panel
ATR value table displayed on the chart
Optional ATR high/low lines (disabled by default)
Defaults
Only MA1–MA3 enabled by default (clean out of the box)
Default MA line width set to 1
ATR lines OFF by default
Important Note (If it “drifts” / appears off the price)
If the indicator looks “detached” or seems to drift, it’s usually because TradingView moved it into a separate pane.
Fix: click the three dots next to the indicator name → Move to → Main chart.
You can also remove and re-add the indicator to reset its placement.
Dip Buy/Sell Signals (Vix Fix + MA Deviation + TRMAD) [DotGain]Dip Buy/Sell Signals (Vix Fix + MA Deviation + TRMAD)
This indicator combines three proven market stress and mean-reversion components to identify potential buy and sell opportunities during extended market conditions.
────────────────────
📌 Included Components
1️⃣ Volatility-Based Stress Filter (Vix Fix)
Detects short-term market panic using relative price movement.
Signals are generated only during periods of elevated volatility or market stress.
2️⃣ Moving Average Deviation (MA Deviation)
Identifies overbought and oversold conditions based on the percentage deviation from a selected moving average.
Supported MA types:
• EMA
• SMA
• RMA
• VWMA
• WMA
• TEMA
3️⃣ TRMAD (True Range Mean Absolute Deviation)
Measures the distance of price from its mean relative to current volatility.
Useful for filtering extreme price moves and reducing false signals.
────────────────────
📈 Trading Signals
Buy Signal:
• Elevated market volatility
• Price significantly below the moving average
• TRMAD below the defined threshold
Sell Signal:
• Elevated market volatility
• Price significantly above the moving average
• TRMAD above the defined threshold
Signals are visualized directly on the chart:
• Buy: green label below the candle
• Sell: red label above the candle
────────────────────
⚙️ Settings & Customization
All components are fully adjustable:
• Lookback periods
• Moving average types and lengths
• Volatility and threshold levels
This makes the indicator suitable for:
• Intraday trading
• Swing trading
• Crypto, Forex, indices, and equities
────────────────────
Disclaimer
This "Dip Buy/Sell Signals (Vix Fix + MA Deviation + TRMAD)" (DipSig) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice.
The signals generated by this tool (both "Buy" and "Sell") are the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. All trading and investing in financial markets involves substantial risk of loss. You can lose all of your invested capital.
Past performance is not indicative of future results. The signals generated may produce false or losing trades. The creator (© DotGain) assumes no liability for any financial losses or damages you may incur as a result of using this indicator.
You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR) and consider your personal risk tolerance before making any trades.
Reversal StrategyWhat it is
A rules-based intraday reversal framework that combines: (1) higher-timeframe bias, (2) structural pivot logic, and (3) BOS confirmation inside a defined timing window.
How it works (high level)
Bias layer: Uses higher-timeframe OHLC to define directional context.
Structure engine: Identifies swing pivots to map structure objectively.
BOS validation: Triggers only after a confirmed break-of-structure (strictness configurable).
Timing window (“continuation/entry window”): Signals are restricted to specific windows to reduce random mid-session noise.
Risk visualization: Plots stop/target visualization from the model’s structure so the trade lifecycle is clear.
How to use
Best used during the most liquid session hours.
Keep defaults first; the BOS strictness and window timing materially change the signal distribution.
Not financial advice. Futures trading involves risk. Past performance does not guarantee future results.
RSI & BB Oversold Scalper with MACD Confirmation [DotGain]RSI & BB Oversold Scalper with MACD Confirmation
The RSI & BB Oversold Scalper is a mean reversion / dip-buying indicator designed for traders who want to combine oversold conditions with momentum confirmation .
It uses a multi-step logic: first detect an oversold setup, then wait for a MACD confirmation within a defined time window before issuing a buy signal.
---
Core Concept
1. Detect an oversold setup using Bollinger Bands %b, RSI and an optional DSS filter
2. Keep the setup active for a limited number of candles
3. Trigger the entry using a MACD bullish crossover
4. Reset after entry to avoid multiple signals from the same setup
---
Buy Signal Logic
A buy signal is generated when the following conditions are met:
1. Oversold Setup (filters can be enabled/disabled individually)
• Bollinger Bands %b Oversold (Lookback-based)
The price has traded below the lower Bollinger Band at least once within the last `lookbackBB` candles.
• RSI Oversold (Lookback-based)
The RSI has dropped below 30 at least once within the last `lookbackRSI` candles.
• DSS (Double Smoothed Stochastic) Reversal Filter
A bullish crossover of the DSS line above its signal line while the DSS value is below 20 , indicating a potential momentum reversal from oversold conditions.
Note:
BB %b and RSI are lookback filters , while the DSS condition is a single-bar crossover event .
---
2. MACD Confirmation (Entry Timing)
After the setup becomes active, the indicator waits for a bullish MACD crossover (`MACD line crosses above Signal line`) within a user-defined time window (`validWindow` candles).
If the MACD confirmation occurs within this window, a buy signal is printed.
If the window expires without confirmation, the setup is discarded automatically.
---
Reset Logic
• After a buy signal, the setup is reset immediately
• Only one signal is allowed per setup
• No late entries after the time window expires
---
Inputs & Customization
• Enable or disable BB, RSI and DSS filters individually
• Adjust lookback periods to control how recent oversold conditions must be
• Tune the MACD confirmation window to balance early vs. conservative entries
Smaller windows = faster, more aggressive entries
Larger windows = fewer but more confirmed signals
Recommended Markets & Timeframes
• Cryptocurrencies, Forex, Indices, liquid stocks
• Best suited for 1m – 15m scalping
• Also usable on 15m – 1h for slower mean-reversion trades
Visuals
• Buy signals are displayed as labels below the price candles
Important Notes
• This indicator is a signal and timing tool , not a complete trading system
• Always combine with higher-timeframe trend, support/resistance or volume analysis
• Backtesting and paper trading are strongly recommended
Disclaimer:
This "RSI & BB Oversold Scalper with MACD Confirmation" (Oversold Scalper) indicator is provided for informational and educational purposes only. It does not, and should not be construed as, financial, investment, or trading advice.
The signal generated by this tool (Green) is the result of a specific set of algorithmic conditions. They are not a direct recommendation to buy or sell any asset. The indicator's purpose is to highlight possible weakness in the markets, not to provide infallible trade signals.
All trading and investing in financial markets involves a substantial risk of loss. You can lose all of your invested capital.
Past performance is not indicative of future results. Even an indicator designed to filter out "chop" may produce false, lagging, or losing signals. Markets can remain unpredictable longer than you can remain solvent.
The creator DotGain assumes no liability for any financial losses or damages you may incur, directly or indirectly, as a result of using this indicator or the information it provides.
You are solely responsible for your own trading and investment decisions. Always conduct your own research (DYOR), validate signals with other methods, and consider your personal risk tolerance before entering any trade.
MTF Squeeze Confluence CloudsMTF Squeeze Confluence Clouds is a multi-timeframe volatility compression indicator designed to visually identify Bollinger Band / Keltner Channel squeeze alignment across multiple timeframes.
By aggregating squeeze conditions from up to seven configurable timeframes, the indicator highlights periods of volatility contraction confluence, helping traders quickly assess whether compression is isolated or broadly aligned.
Core Features
Multi-Timeframe Squeeze Detection
Detects BB/KC squeeze conditions across up to 7 independent timeframes, each fully customizable.
Dynamic Confluence Cloud Visualization
Squeeze regions are rendered as adaptive chart-overlay clouds.
Cloud color intensity reflects the number of active squeezes, providing immediate visual feedback on compression strength.
OHLC or Heikin Ashi Source Selection
Choose between traditional OHLC or Heikin Ashi candle calculations for squeeze evaluation.
Confluence-Based Color Mapping
Cloud colors automatically adapt as additional timeframes enter or exit squeeze, allowing traders to monitor compression buildup and release in real time.
TF Forecast Table
An optional on-chart table displays:
- Enabled timeframes
- Current squeeze participation per timeframe
- Color-coded confluence strength for quick reference
Clean, Non-Intrusive Design
All plots are hidden except for clouds and the optional table, ensuring a clutter-free charting experience.
Customization Options
Independent enable/disable for each timeframe
Adjustable Bollinger Band and Keltner Channel parameters
Configurable cloud opacity and visual intensity
Selectable table position (any chart corner)
This indicator is intended as a volatility context and confluence visualization tool.
It does not generate trade signals and should be used in combination with price action, volume, or other analytical methods.
GK V2 Zero-Lag trend Ribbon GK Zero-Lag Trend Ribbon V2 is the same as version 1 but with a trend ribbon to help identify the trend. Designed to help keep traders aligned with clean market direction, it uses a Zero-Lag EMA based trend ribbon with adaptive volatility bands to clearly identify bullish and bearish trends wile filtering out noise with signal prints. The ribbon dynamically changes colour to show trend bias, and GK BUY / GK SELL only print on confirmed trend flip- one clean signal per trend no clutter
PX ORB Luxe Terminal 🌐 Overview and Philosophy The PX ORB Luxe Terminal is a volatility-based execution suite designed to structure the chaotic market open. While the Opening Range Breakout (ORB) is a foundational strategy, traders often struggle with two main issues: identifying the correct volatility window and managing risk during the initial expansion.
This script solves those problems by combining a flexible range detector with a momentum filter and an automated risk calculator. It validates the "worth" of the tool by acting as a discipline engine preventing over-trading and enforcing a strict process during the session open.
⚙️ Methodology and Logic This script operates using a confirmed three-step logic sequence:
Customizable Volatility Range (5m vs 15m): The core of the strategy defines the High and Low of the opening session. This is fully adjustable via the settings:
15-Minute Mode: Best for capturing the macro move of the session.
5-Minute Mode: Best for scalping quicker volatility expansions.
The user sets the specific Open Time (e.g., NY 09:30), and the script automatically calculates the range from that moment.
Momentum Filter (False Signal Rejection): To filter out "fakeouts" and chop, the script utilizes a Trend Filter. A breakout is only considered valid if the price is trading on the correct side of the 20-period EMA and the VWAP (Volume Weighted Average Price). This ensures that entries are only taken when short-term momentum aligns with the volume-weighted average.
Directional Lock & Discipline: A unique feature of this terminal is the "Direction Lock." Once a valid trade is taken, the system can be set to lock that direction for the remainder of the session. This prevents "whipsaws" (flipping long to short repeatedly) and helps the trader stick to the initial bias.
🌍 Market Compatibility This logic is universal to volatility assets but includes specific modes for different asset classes:
Indices (US30, NAS100, SPX500): Use the default NY Session settings (09:30 Open).
Commodities (Gold, Oil): Adjustable start times to capture pre-market volume (e.g., 08:20 Open).
Crypto (BTC, ETH): Includes an "All-Day Trading" toggle to bypass session filters for 24/7
markets.
Futures ( GC, NQ, BTC, ES, YM)
🛡️ Risk Management Engine Rather than manual calculation, the script automates the risk parameters based on the volatility of the range:
Stop Loss Profiles: Users can choose between a "Conservative" profile (Stop at the opposite end of the range) or "Aggressive" (Stop at the midpoint/equilibrium of the range).
Target Projections: The script automatically plots fixed Reward-to-Risk targets (1.2R, 2.0R, and 3.0R) to assist with partial profit taking and trade management.
🖥️ Features and Interface
Live HUD: A heads-up display panel shows the current session status, win/loss metrics for the day, and the state of the EMA/VWAP filters.
News Warning: An integrated time filter alerts the user to upcoming news events (based on user input) to avoid trading during news spikes.
Visual Clarity: The chart overlay is designed to be minimal, highlighting only the active session and the relevant breakout levels.
⚠️ Disclaimer This tool is for technical analysis and educational purposes only. Past performance does not guarantee future results.
Dual VWAP + Dual ATR % BandsScript is adjusted for 5min time frame, can play around setting to adjust accordingly.
It has
Vwap regular
Vwap with adjustable time period
Bands based on ATR value, ie (if ATR is 10, one can adjust band to VWap+ATR %( adjustable)
ATR% can be adjusted to include daily ATR values in addition to current day ATR based on chart time frame.
The bands can be tied to regular VWAP or period VWAP
Regards
RSI adaptive zones with divergencesThis script is modified version of Adaptive RSI,
Thanks to creator of the script, modification is made by cloude code.
TA Confluence Scanner v2.9 | Mint_Algo📘 TA Confluence Scanner
Introduction
The TA Confluence Scanner is a multi-factor trend system designed to filter market noise and identify high-probability trade setups. By combining adaptive algorithms (KAMA) with Price Action methodologies (SMC, Breakouts, Fractals), this indicator operates on the principle of Confluence : a signal is only valid when multiple independent tools agree on the direction.
Instead of relying on a single lagging indicator (like just MA fast and slow crossover), this script acts as a "Scanner," evaluating the market state through Volatility, Trend Structure, and Equilibrium.
───────────────────────────────────────────────────
Important Note
To make this "Plug & Play," I have included optimized presets in the settings for different timeframes (1m/15m-1h/4h-1D) and trading styles (Scalper, Intraday, Swing, Investor) tested on symbols:
FX:EURUSD
IG:NASDAQ
BITSTAMP:BTCUSD
BINANCE:ETHUSD
CAPITALCOM:US500
OANDA:XAUUSD
NASDAQ:AAPL
NASDAQ:TSLA
BUT default settings already include a good preset which excludes most of the noise and grabs the trend better (fewer entries, but quality is higher).
Check the presets at the bottom 👇
───────────────────────────────────────────────────
Core Features
Adaptive Trend Filter (KAMA): Adjusts to market volatility to distinguish between chop and true trends.
SMC Equilibrium (EQ) Fans: A three-tiered dynamic structure (Fast, Medium, Slow) for trailing stops and targets.
Confluence Counter: Visually displays the strength of a signal (e.g., "Strong 4/6") based on how many factors align.
Re-Entry Logic: Identifies low-risk entry points within an existing trend.
Automated S/R & Breakouts: Detects key pivot levels and structural breaks.
───────────────────────────────────────────────────
Settings & Components Breakdown
1. KAMA (Primary Trend Filter)
The backbone of the system. It calculates the Efficiency Ratio (ER) of price movement.
How it works: If the ER is high (strong trend), KAMA follows price closely. If ER is low (ranging), KAMA flattens out to prevent false signals.
Tuning:
Fast (ER ~100/5/60): For Scalping.
Smooth: Default settings are optimized for a balance between lag and noise reduction.
2. SMC Equilibrium (EQ Structure)
Based on the HL2 formula (High+Low / 2), this creates a "fan" of three lines:
EQ1 (Fast): The aggressive line. Used for early exits or scalping stops.
EQ2 (Medium): The baseline trend structure.
EQ3 (Slow): The major trend container. Used for position trading.
Usage: Use these lines to gauge how far price has deviated from its "fair value."
3. Breakout & Internal Trend
Lookback Period: Defines the range for a valid breakout. A lower lookback (e.g., 10) gives earlier signals but more noise; a higher lookback (e.g., 20-30) confirms significant structural breaks.
Internal Trend: A simplified SMA check to ensure immediate momentum aligns with the macro trend.
4. Signal Strength (The Confluence Meter)
The indicator counts active signals from: KAMA, Internal Trend, S/R, FVG, Breakout, and EQ.
Strong Signal: When the count hits your threshold (e.g., 4/6 ). This suggests a high-probability reversal or breakout.
Medium Signal (Triangles): These appear when the trend is active but not all filters align. These are excellent continuation/re-entry points.
───────────────────────────────────────────────────
How to Trade (Strategy Guide)
🎯 The Entry
Wait for a Strong Signal (Large Label). This confirms that volatility, structure, and momentum have aligned.
Conservative: Wait for the candle to close.
Aggressive: Enter on the breakout of the KAMA line.
🔄 Re-Entry & Continuation
Markets rarely move in a straight line.
Scenario: You missed the initial "Strong" entry, or you took profit and want to re-enter.
The Signal: Look for the small Triangles (Medium signals). These often appear after a pullback when price resumes the main trend.
Logic: If the main KAMA trend is still green/red, but the "Strong" signal isn't firing, a Triangle indicates a safe place to add to a position.
⚠️ Pyramiding & Risk Management (Advanced)
The EQ Lines (Fast/Medium/Slow) are designed for a tiered position management strategy:
Entry: Open position (e.g., 0.03 lots).
First Take Profit: When price extends far beyond EQ1 (Fast) , lock in partial profits.
Trailing Stop: Move your Stop Loss to trace the EQ2 (Medium) line.
Trend Riding: Hold the "Runner" portion of your position until price closes back under EQ3 (Slow) or the KAMA line.
Tip: Use William Fractals (Period 2) to pinpoint exact swing highs/lows for tightening stops.
───────────────────────────────────────────────────
Presets & Optimized Settings
To make this "Plug & Play," I have included optimized presets in the settings for different trading styles.
(If you don't see some parameters, that means they are turned off in trading mode)
⚡ SCALPER (1m - 5m)
KAMA:
ER: 100
Fast Length: 15
Slow Length: 30
FVG:
Size %: 0.01
Trend Detection:
Length: 20
Breakout:
Lookback Period: 10
S/R Detection:
Pivot Length: 10
Tolerance: 0.3
SMC EQ:
Default: 10
EQ1: 10
EQ2 (Main): 30
EQ3: 120
Signal Strength:
Strong: 4
Medium: 3
📊 INTRADAY (15m - 1H)
KAMA:
ER: 100
Fast Length: 5
Slow Length: 30
Trend Detection:
Length: 100
Breakout:
Lookback Period: 30
S/R Detection:
Pivot Length: 20
Tolerance: 0.5
SMC EQ:
Default: 10
EQ1: 10
EQ2 (Main): 40
EQ3: 80
Signal Strength:
Strong: 4
Medium: 3
📈 SWING (4H - 1D)
KAMA:
ER: 30
Fast Length: 4
Slow Length: 30
Trend Detection:
Length: 50
Breakout:
Lookback Period: 20
S/R Detection:
Pivot Length: 30
Tolerance: 0.7
SMC EQ:
Default: 10
EQ1: 10
EQ2: 50
EQ3 (Main): 60
Signal Strength:
Strong: 4
Medium: 3
💼 INVESTOR (4H - 1D+)
KAMA:
ER: 30
Fast Length: 5
Slow Length: 10
Trend Detection:
Length: 100
Breakout:
Lookback Period: 50
S/R Detection:
Pivot Length: 30
Tolerance: 0.7
SMC EQ:
Default: 10
EQ1: 10
EQ2: 50
EQ3 (Main): 100
Signal Strength:
Strong: 4
Medium: 3
───────────────────────────────────────────────────
Notes
FVG (Fair Value Gaps): Optional. Enable if you trade volatile assets like Crypto/Gold where imbalances are common.
Support/Resistance: The built-in Pivot system is optional. Disable it if you prefer drawing your own levels to keep the chart clean.
Recommended Pairing:
For best results, pair this with a momentum oscillator like RSI to detect the range regime of a trend. Or DI+ and DI- (when it crosses over each other, that means the "range of possible" regime change of a trend).
───────────────────────────────────────────────────
Disclaimer:
This tool is for informational purposes only. "Confluence" increases probability but does not guarantee results. Always manage your risk.
VESTORA | Market Regime V3.3VESTORA | Market Regime is a context tool designed to highlight the dominant market environment using higher-timeframe structure.
The script evaluates the previous week’s close to define a confirmed weekly regime, helping reduce noise and avoid intraweek repainting.
A secondary daily context is shown for short-term behavior, without generating buy or sell signals.
Background shading represents the weekly regime, while on-chart notes provide contextual reminders, especially at the start of the week.
This tool does not predict price movements.
It exists to slow decision-making, encourage patience, and support disciplined market observation.
Key points:
Weekly regime is based on the previous week’s close (confirmed, non-repainting).
Daily context may change and is informational only.
Designed for market awareness, not signal generation.
Asset type is detected automatically, with an optional manual override.
Use this script as a context layer, alongside your own analysis.
Adaptive Trend Mapper-ATM [Arjo]Adaptive Trend Mapper (ATM) is a directional pressure indicator designed to visualize how buying and selling commitment evolves during market trends.
Instead of focusing on price direction alone, ATM maps who is exerting stronger pressure —buyers or sellers—and how that pressure expands, weakens, or compresses over time.
Idea
ATM is built around a single concept:
Directional pressure is best understood by weighting trend strength against directional imbalance .
To achieve this, the indicator transforms trend strength into two opposing pressure measures:
Bull Pressure Index
Bear Pressure Index
These indices expand, contract, and converge based on how strongly buyers or sellers are committing, rather than simply tracking momentum or price changes.
How It Works
1. Bull & Bear Pressure Indices
ATM derives two pressure curves by weighting trend strength against directional imbalance:
The Bull Pressure Index increases when upward pressure strengthens.
The Bear Pressure Index increases when downward pressure strengthens.
Both indices operate on a 0–100 scale and are designed to diverge during strong trends and converge during non-directional or compressed phases.
Optional smoothing can be applied to reduce noise and improve readability.
2. Compression / Squeeze Detection
When:
Trend strength weakens,
Bull and Bear pressure converge,
And convergence continues over time,
ATM highlights a compression zone, signaling reduced directional conviction.
These zones often precede directional expansion once pressure rebuilds.
3. Adaptive Trend Context
An adaptive smoothed price curve is displayed on the chart to provide trend context.
Color changes reflect short-term directional shifts, helping align pressure signals with price structure.
This component is contextual only and does not generate signals by itself.
4. Optional Trend Bias Reference
An optional EMA-50 can be enabled to help identify broader directional bias and align pressure behavior with the prevailing trend.
5. Step-Based Visualization
The pressure indices can be optionally step-compressed, improving clarity on fast or noisy charts by reducing minor fluctuations.
How to Use ATM
Rising Bull Pressure → strengthening buyer commitment
Rising Bear Pressure → strengthening seller commitment
Wide separation between indices → strong directional trend
Convergence with compression highlight → range or pre-breakout environment
Notes
ATM uses widely known market concepts such as trend strength, directional imbalance, and adaptive smoothing as conceptual inputs.
All calculations, pressure mapping logic, and compression detection are original implementations developed specifically for this script.
ATM is effective when used to assess participation quality, not as a standalone signal generator.
Disclaimer
This indicator is intended for analysis and educational purposes only.
It does not generate buy or sell signals.
Always apply proper risk management.
Happy Trading.
Flipper Elite Pro - Multi-Signal Trading SystemOverview
Flipper Elite is a comprehensive trading indicator that combines liquidity grab detection, EMA crossover analysis, and volatility-based signals to identify high-probability entry points. Designed for traders seeking precise market entries with multiple confirmation layers.
🎯 Key Features
1. Multi-Layer Signal System
Primary Signals - High-confidence entries based on liquidity grabs + volatility spikes
Fast Signals - Quick momentum-based entries for active traders
Strong Signals - Double-confirmed entries when both conditions align
XX Signals - Premium signals when buy/sell signals coincide with EMA crossovers
2. Price Action
Dynamic support/resistance tracking
ATR-based adaptive levels (R2, R1, S1, S2)
Visual trend identification
3. EMA Crossover System
Dual EMA trend detection
Bullish/Bearish crossover alerts
Optional trend filtering for cleaner signals
4. Liquidity Grab Detection
Identifies false breakouts and stop hunts
Captures reversals after liquidity sweeps
Multiple sensitivity levels for different market conditions
Best Practices
For Day Traders:
Enable Primary and Strong signals
Use Trend Filter = ON
Watch for XX signals (highest probability)
Trade in direction of EMA trend
For Scalpers:
Enable Fast Signals
Consider disabling trend filter
Use lower timeframes (1m, 5m)
Quick entries/exits
For Swing Traders:
Focus on Strong Signals and XX Signals only
Use higher timeframes (4H, Daily)
Confirm with GOD Line support/resistance
Be patient for high-quality setups
📈 Recommended Settings
Timeframes:
Scalping: 1m, 5m
Day Trading: 5m, 15m, 1H
Swing Trading: 4H, Daily
Position Trading: Daily, Weekly
Markets:
Forex pairs Crypto (BTC, ETH, altcoins) Stock indices Individual stocks Commodities
Signal Types Explained
PRIMARY SIGNALS (Triangle)
Appearance: Triangle Up (BUY) / Triangle Down (SELL)
Color: Maroon
Trigger Conditions:
Liquidity grab detected (price breaks high/low then rejects)
AND volatility spike OR strong price rejection (60%+ of candle range)
Passes trend filter (if enabled)
Reliability: ⭐⭐⭐⭐ (High)
Best For: Standard entries, day trading, most timeframes
How to Use:
Primary workhorse signals
Trade these with confidence when trend filter is ON
Wait for candle close confirmation
Set stop loss beyond the liquidity grab point
⚡ FAST SIGNALS (Circle)
Appearance: Circle with "F.Buy" or "F.Sell"
Color: Maroon
Trigger Conditions:
Quick liquidity grab (3-bar lookback vs 9-bar)
Momentum shift (direction change confirmation)
Price above/below fast 5-period EMA
Reliability: ⭐⭐⭐ (Medium)
Best For: Scalping, active trading, catching quick moves
How to Use:
More frequent signals = more noise
Best on lower timeframes (1m, 5m, 15m)
Require faster reaction time
Tighter stop losses recommended
Default: OFF (enable only if you scalp)
💎 STRONG SIGNALS (Diamond)
Appearance: Diamond with "S.Buy" or "S.Sell"
Color: Maroon
Trigger Conditions:
BOTH Primary AND Fast conditions trigger simultaneously
Double confirmation of market structure
Strongest single-indicator signal
Reliability: ⭐⭐⭐⭐⭐ (Very High)
Best For: High-confidence entries, conservative traders
How to Use:
Wait for these if you want quality over quantity
Excellent risk/reward ratio
Larger position sizes can be justified
Often marks major turning points
❌❌ XX SIGNALS (X-Cross - BEST)
Appearance: Large X-Cross with "XX S.BUY" or "XX S.SELL"
Color: Maroon
Trigger Conditions:
Buy/Sell signal occurs at the exact same time as EMA crossover
Triple confirmation: Liquidity + Volatility + Trend Change
Rarest and most powerful signal
Reliability: ⭐⭐⭐⭐⭐+ (Maximum)
Best For: Major trend reversals, swing trading, highest conviction trades
How to Use:
Most important signals on the chart
Consider larger position sizes (within risk limits)
Often marks the beginning of multi-day/week trends
Set wider profit targets
These are "no-brainer" entries when they appear
Why XX Signals Are Special:
When a buy/sell signal aligns with an EMA crossover, you get:
✅ Liquidity has been grabbed (stops triggered)
✅ Volatility confirms the move
✅ Trend has officially changed direction
✅ Institutional money likely entering
🔵 EMA CROSSOVER SIGNALS (Small X-Cross)
Appearance: Small X-Cross with "UP" or "DN"
Color: Navy Blue
Trigger Conditions:
Note: Hidden when it coincides with buy/sell signals
Reliability: ⭐⭐⭐⭐ (High for trend confirmation)
Best For: Trend identification, bias confirmation
How to Use:
Shows when the trend officially changes
Use to set directional bias (only buy after "UP", only sell after "DN")
Not necessarily immediate entries
Can be early on lower timeframes
Why They Sometimes Disappear:
If an EMA crossover happens at the SAME bar as a buy/sell signal, only the XX signal shows
This prevents chart clutter and highlights the strongest setups
🎯 Signal Hierarchy (Best to Good)Priority Ranking:
XX Signals ⭐⭐⭐⭐⭐ - TRADE THESE ALWAYS
Strong Signals ⭐⭐⭐⭐⭐ - High confidence
Primary Signals ⭐⭐⭐⭐ - Standard entries
EMA Crossovers ⭐⭐⭐⭐ - Trend confirmation only
Fast Signals ⭐⭐⭐ - Active traders only
"This script is designed to look for my personal use for educational purposes."
OzCobbs MACD-CCI with DivergenceOzCobbs MACD-CCI with Divergence combines the most useful behaviour of MACD and CCI into a single adaptive indicator, designed to highlight true momentum extremes rather than fixed, arbitrary levels.
This tool is built for traders looking for a Goldilocks solution, not too simple, not over-engineered, just enough structure to reveal when market behaviour becomes abnormal.
Instead of static overbought or oversold zones, both MACD and CCI use statistically derived outlier bands that automatically adjust to the instrument, timeframe, and volatility regime. This makes extremes meaningful, comparable, and consistent across markets.
The indicator can be used in two ways:
Merged mode, where MACD and CCI are overlaid into one cohesive view of momentum and stretch.
Split mode, by adding the indicator twice, setting one instance to MACD and the other to CCI, allowing focused analysis of each component.
Optional CCI divergence detection is also included to help identify momentum exhaustion at statistically significant extremes, without clutter or hidden divergence noise.
The default settings are great, but it is fully customisable and adaptable to suit individual trading styles - simply tweak, turn on/off whatever you feel is needed to improve YOU.
Enjoy
RS ForecastThis tool helps Growth Traders (CANSLIM, Mark Minervini style) answer the critical question: "What percentage does the price need to increase today for the Relative Strength (RS) Line to hit a New High?"
Instead of guessing by looking at the line, this indicator uses reverse engineering to provide the exact percentage distance to the RS breakout.
Key Features: A clean Dashboard overlay that tracks 3 key RS milestones:
+ RS 10 Days: For catching early momentum and Pocket Pivots.
+ RS 50 Days: The benchmark for medium-term strength (Minervini Trend Template).
+ RS New High (250 Days): Confirming Blue Sky breakouts and 52-week highs.
How it works:
Yellow: "Alert Zone" (Price is within 3% of breaking the RS High). Get ready!
Green (BREAK): RS Line has broken out. The stock is outperforming the market.
Gray: Lagging, requires more consolidation.
Settings:
Default benchmark: VNINDEX (Can be changed to SPX, Nasdaq, or any ticker).
Fully customizable table position, colors, and text size.
mk bollinger bands signals - free overly trueThis is the FREE version of MK Bollinger Bands Signals.
A clean and simple Bollinger Bands indicator designed to keep the chart clear.
It provides basic Buy & Sell signals for educational and intraday use.
This version is intended as a free release.
Advanced features and a PRO version may be released separately.
