Get started

Volatility

Rumiancev Reaction ZonesRumiancev Reaction Zones Rumiancev Reaction Zones (RRZ) is a clean, non-signal overlay that highlights potential reaction areas — places where price often slows down, bounces, or becomes stretched relative to the current market range. RRZ is NOT a trading bot. It does not provide guaranteed entries/exits. Use it as a context tool alongside your own confirmation (structure, trend bias, momentum/volume, etc.). ──────────────────────────────────────── WHAT IS DRAWN ON THE CHART ──────────────────────────────────────── 🔵 Blue Zone • Buy Area (Filled Band) A lower reaction band (“discount / downside stretch”). • Upper edge: Blue Zone • Buy Area (blue line) • Lower edge: Blue Zone • Lower Band (hidden band edge) When price enters this band, reactions become more likely (bounces, stabilization, reclaim moves). 🟠 Orange Zone • Sell Area (Filled Band) An upper reaction band (“stretch / upside extension”). • Lower edge: Orange Zone • Sell Area (orange line) • Upper edge: Orange Zone • Upper Band (hidden band edge) When price reaches this band, pauses, pullbacks, or distribution can appear. ⚪ Guide Line (Gray) A neutral reference line inside the structure. Helps to judge whether price is closer to “discount” (Blue side) or “stretch” (Orange side). 🟢 Deep Line (Green) — Aggressive Context (NOT a zone) A deeper downside reference line (green), not a filled band. If price reaches it, conditions are typically more volatile and risk is higher. Treat it as a high-risk context line, not an automatic entry. 🔴 Orange Extreme (Red) — High Extension (NOT a zone) A high-extension reference line above the Orange Zone. Often used as a strong risk-reduction context after extended upside moves. ──────────────────────────────────────── HOW TO USE RRZ (PRACTICAL FRAMEWORK) ──────────────────────────────────────── 1) Blue Zone approach (potential entries) • When price enters the Blue Zone , wait for confirmation first (rejection wick, reclaim back above the zone edge, local structure holding). • Consider scaling in gradually rather than entering full size at once. • If price continues deeper toward the green Deep Line , treat it as higher risk and act only if your plan and risk limits allow it. 2) Orange Zone approach (potential exits) • When price reaches the Orange Zone , many traders consider partial risk reduction (scale out, protect profit, tighten stops). • Near the red Orange Extreme line, many traders consider stronger risk reduction (up to closing most/all), especially after impulsive runs. IMPORTANT: RRZ marks areas , not entries. Always define invalidation (stop/idea failure point) and position size before acting. ──────────────────────────────────────── CONFIRMATION IDEAS (SIMPLE) ──────────────────────────────────────── • Rejection wicks / reclaim back above a zone edge • Break & retest of local structure • Momentum/volume shift you personally trust • Alignment with higher-timeframe direction ──────────────────────────────────────── SETTINGS ──────────────────────────────────────── • Depth → sensitivity (lower = more reactive, higher = steadier) • Smoothness → adaptation speed (lower = faster, higher = smoother) • Zone Width → thickness of the Blue/Orange fills (visual width) ──────────────────────────────────────── EXAMPLES (CHART IMAGES) ──────────────────────────────────────── Example 1 — Orange Zone reaction (Daily) Price pushes into the Orange Zone (stretch area), then cools off and rotates lower. RRZ helps visualize this as a place to watch for rejection or profit-taking context. Example 2 — Repeated cycles (Daily) Multiple cycles where touches into the Orange Zone often coincide with pauses/pullbacks, while dips into the Blue Zone tend to act as reaction areas during corrections. Example 3 — Blue Zone reaction after a sell-off (4H) A sharp move pushes price into the Blue Zone , followed by stabilization and reaction. The Orange Zone remains overhead as the next upside stretch region to monitor. ──────────────────────────────────────── NOTES ──────────────────────────────────────── • Zones are dynamic and update as new market data forms. • No future-looking data (“lookahead”) is used. ──────────────────────────────────────── DISCLAIMER ──────────────────────────────────────── This script is for educational and informational purposes only and is not financial advice. Trading involves risk. No indicator can guarantee results.
Pine Script® indicator
by Rumiancev
LiquidityPulse MTF Intrabar Micro-Structure Absorption DetectorLiquidityPulse MTF Intrabar Micro-Structure Absorption Detector Non-repainting: Markers appear on bar close and do not change. Important (if you can’t see any markers) This indicator measures intrabar micro-structure and it can use seconds-based micro data on lower timeframes. If you load it and don’t see anything: Go to 15m or higher, or In settings, change Micro feed (inside HTF bar) from Auto to 1m / 5m / 15m. Auto will often choose a “micro” feed that’s very small when your HTF is small, which can affect what you see. What this indicator does This script is designed to highlight absorption-like conditions by analysing what happens inside each higher-timeframe (HTF) candle — not just the candle’s OHLC. It looks for candles where: price moves a lot internally (high intrabar activity), the candle structure shows churn / rejection (wick dominates body), and participation is elevated (relative high volume). When those conditions align, the indicator prints a marker line at the wick extreme: LW (Lower-wick marker) = printed at the candle’s low UW (Upper-wick marker) = printed at the candle’s high Each marker is then extended to the right (so it can be treated like a potential level). Image shows a wick-dominant candle with an absorption marker: Markers appear when price shows strong intrabar movement, a wick-dominant candle structure, and elevated participation — a combination often associated with absorption-like behaviour. How it works A marker is created only when all three filters pass on a confirmed candle close: 1) Intrabar micro-speed (internal activity) The script pulls intrabar closes from a lower timeframe (“micro feed”) and sums the absolute internal price changes inside the HTF candle. It then converts this to a Z-score and checks it against the Speed-z threshold. Higher threshold = fewer, stronger events. 2) Wick vs body (churn / rejection structure) This measures how the HTF candle’s internal range compares to its net close-to-open movement using: Churn ratio = (HTF range) / (HTF body) If the candle has a large range but a relatively small body, it indicates that price moved extensively during the candle but made limited net progress by the close — a structure often associated with active two-sided participation and absorption-like behaviour. 3) Relative HTF volume (participation filter) The script also Z-scores HTF volume and requires it to exceed the Volume z-score threshold. This helps filter out candles that show apparent activity but occur on relatively low participation. Multi-timeframe + micro-structure analysis: Image shows a 15 minute chart marker on the 1 minute timeframe. The indicator can analyse higher-timeframe candles (15 minute) while using lower-timeframe micro data inside each bar (1 minute). This allows absorption-style markers to be plotted with higher-timeframe context and intrabar detail. Composite Intensity When a marker triggers, the script calculates a Composite Intensity number (CI): It’s a combined score based on how strongly each of the three conditions exceeded its threshold. Higher CI = stronger absorption-style event Higher CI = brighter chart marker The table shows: HTF and Micro timeframes being used the last marker type (LW or UW) the last CI value Micro feed & multi-timeframe behaviour This indicator always works as a two-layer system: HTF candle (context) → the candle you’re analysing Micro feed (inside HTF bar) → the intrabar data used to measure micro-speed Higher-TF source Chart timeframe = uses your chart timeframe as HTF Manual = choose any HTF (example: chart = 1m, HTF = 15m → prints 15m absorption markers onto a 1m chart) Micro feed options Auto (recommended) picks a sensible micro feed based on HTF Or choose 1s / 1m / 5m / 15m manually for performance/clarity HTF direction filter (optional) When enabled: LW markers only print when the HTF candle closes bullish UW markers only print when the HTF candle closes bearish This is optional and is designed to reduce noise by aligning markers with the directional bias of the higher-timeframe candle. Traders can use the absorption markers to: Identify potential areas of interest where price showed unusually high intrabar activity but limited net progress by the close. Mark reference levels where price may react again later, reflecting prior elevated participation and extensive intrabar movement areas. Add structural context to existing analysis such as trend structure, support/resistance, session highs/lows, or other volume-based tools. Compare behaviour across timeframes, by observing how absorption-style events on a higher timeframe align with lower-timeframe price action. Image shows price reacting to a previous absorption markers level (Lines/ levels can be extended in the settings): Extended LW / UW markers can be observed as areas of prior absorption-like activity. Traders may watch how price behaves around these levels (reaction, acceptance, or rejection) alongside their own structure, liquidity, or risk management tools. Key settings (what they change) Higher-TF source / Higher-TF bar (manual): which candle timeframe is analysed Micro feed (inside HTF bar): what intrabar resolution is used to calculate micro-speed Speed-z threshold: how unusual intrabar activity must be Wick/Body threshold: how large the candle’s total range must be compared to its body Volume z-score threshold: how elevated HTF volume must be Z-score look-back: how far back the indicator normalises speed/volume Line extension (bars): raise if you want markers to behave more like extended levels Max markers: how many markers remain on the chart at once Alerts Alerts trigger on candle close when an absorption marker is detected. Disclaimer This indicator does not measure true order flow or the full limit order book. It uses intrabar price activity, candle structure, and relative participation as interpretive tools to highlight absorption-like behaviour. It is not a buy/sell system, and all signals should be used with traders own confirmation and risk management.
Pine Script® indicator
by Liquidity-Pulse
2
Breakout Open Range (ORB) v3.3This is an advanced version of the classic Open Range Breakout (ORB) strategy, designed for precision and ease of use. It automatically identifies the initial volatility range of a trading session (e.g., London or New York Open) and projects clear Breakout and Take Profit levels. v3.3 Update: Optimized for a cleaner chart and easier configuration. KEY FEATURES: 1. User-Friendly Time Input: No more typing complicated session strings! Now you can simply select the Start Hour/Minute and End Hour/Minute using easy number fields in the settings. 2. Clean Chart Logic (New): The indicator now automatically resets all lines at the start of a new day. The chart remains completely empty until your defined start time (e.g., 15:30), preventing old levels from cluttering the pre-market view. 3. 1:1 Take Profit: Automatically calculates and plots a Take Profit level based on a 1:1 Risk/Reward ratio relative to the range size. *Note:* TP lines appear only AFTER the range formation is complete to maintain visual clarity. 4. Dynamic Price Labels: Displays exact price levels on the right side of the chart for: - Entry (Long/Short) - Stop Loss positions - Take Profit targets - Total Range Size HOW IT WORKS: 1. Define your Open Range time in the settings (e.g., 15:30 to 16:15). 2. The script draws the High and Low of this period. 3. Wait for a candle to close outside the range: - Breakout Above = Long Signal (Target: Blue Upper Line) - Breakout Below = Short Signal (Target: Blue Lower Line) SETTINGS: - Timezone & Session Hours (simple number inputs) - Toggle visibility for Lines, Background, TP, and Labels - Fully customizable colors Perfect for day traders looking for an objective, automated way to trade the opening bell volatility.
Pine Script® indicator
by adgo
H1 Liquidity Sweep Tracker🇬🇧 English: H1 Liquidity Sweep Tracker Overview The H1 Liquidity Sweep Tracker is a technical analysis tool designed for TradingView (Pine Script v5). It identifies "Liquidity Sweeps"—market movements where the price briefly breaches a significant level to trigger stop-loss orders before reversing. Core Functions H1 Level Detection: Regardless of your current timeframe (e.g., 1m, 5m, or 15m), the script automatically fetches the High and Low of the previous 1-hour candle. Real-Time Monitoring: It tracks price action relative to these levels to identify failed breakouts. Visual Indicators: Horizontal Lines: Displays the H1 High (Red) and H1 Low (Green) from the previous hour. Sweep Shapes: A triangle appears above/below the candle when a sweep is detected. How it Works (The Logic) A "Sweep" is triggered when the current price moves beyond the H1 boundary but fails to maintain that position: Bullish Sweep: The price drops below the previous H1 Low (collecting sell-side liquidity) but closes back above it. This suggests a potential upward reversal. Bearish Sweep: The price rises above the previous H1 High (collecting buy-side liquidity) but closes back below it. This suggests a potential downward reversal.
Pine Script® indicator
by ingoschloemer
[GYTS] Volatility Toolkit Volatility Toolkit 🌸 Part of GoemonYae Trading System (GYTS) 🌸 🌸 --------- INTRODUCTION --------- 🌸 💮 What is Volatility Toolkit? Volatility Toolkit is a comprehensive volatility analysis indicator featuring academically-grounded range-based estimators. Unlike simplistic measures like ATR, these estimators extract maximum information from OHLC data — resulting in estimates that are 5-14× more statistically efficient than traditional close-to-close methods. The indicator provides two configurable estimator slots, weighted aggregation, adaptive threshold detection, and regime identification — all with flexible smoothing options via GYTS FiltersToolkit integration. 💮 Why Use This Indicator? Standard volatility measures (like simple standard deviation) are highly inefficient, requiring large amounts of data to produce stable estimates. Academic research has shown that range-based estimators extract far more information from the same price data: • Statistical Efficiency — Yang-Zhang achieves up to 14× the efficiency of close-to-close variance, meaning you can achieve the same estimation accuracy with far fewer bars • Drift Independence — Rogers-Satchell and Yang-Zhang correctly isolate variance even in strongly trending markets where simpler estimators become biased • Gap Handling — Yang-Zhang properly accounts for overnight gaps, critical for equity markets • Regime Detection — Built-in threshold modes identify when volatility enters elevated or suppressed states ↑ Overview showing Yang-Zhang volatility with dynamic threshold bands and regime background colouring 🌸 --------- HOW IT WORKS --------- 🌸 💮 Core Concept The toolkit groups volatility estimators by their output scale to ensure valid comparisons and aggregations: • Log-Return Scale (σ) — Close-to-Close, Parkinson, Garman-Klass, Rogers-Satchell, Yang-Zhang. These are comparable and can be aggregated. Annualisable via √(periods_per_year) scaling. • Price Unit Scale ($) — ATR. Measures volatility in absolute price terms, directly usable for stop-loss placement. • Percentage Scale (%) — Chaikin Volatility. Measures the rate of change of the trading range — whether volatility is expanding or contracting. Only estimators with the same scale can be meaningfully compared or aggregated. The indicator enforces this and warns when mixing incompatible scales. 💮 Range-Based Estimator Overview Range-based estimators utilise High, Low, Open, and Close prices to extract significantly more information about the underlying diffusion process than close-only methods: • Parkinson (1980) — Uses High-Low range. ~5× more efficient than close-to-close. Assumes zero drift. • Garman-Klass (1980) — Incorporates Open and Close. ~7.4× more efficient. Assumes zero drift, no gaps. • Rogers-Satchell (1991) — Drift-independent. Superior in trending markets where Parkinson/GK become biased. • Yang-Zhang (2000) — Composite estimator handling both drift and overnight gaps. Up to 14× more efficient. 💮 Theoretical Background • Parkinson, M. (1980). The Extreme Value Method for Estimating the Variance of the Rate of Return. Journal of Business, 53 (1), 61–65. DOI • Garman, M.B. & Klass, M.J. (1980). On the Estimation of Security Price Volatilities from Historical Data. Journal of Business, 53 (1), 67–78. DOI • Rogers, L.C.G. & Satchell, S.E. (1991). Estimating Variance from High, Low and Closing Prices. Annals of Applied Probability, 1 (4), 504–512. DOI • Yang, D. & Zhang, Q. (2000). Drift-Independent Volatility Estimation Based on High, Low, Open, and Close Prices. Journal of Business, 73 (3), 477–491. DOI 🌸 --------- KEY FEATURES --------- 🌸 💮 Feature Reference Estimators (8 options across 3 scale groups): • Close-to-Close — Classical benchmark using closing prices only. Least efficient but useful as baseline. Log-return scale. • Parkinson — Range-based (High-Low), ~5× more efficient than close-to-close. Assumes zero drift. Log-return scale. • Garman-Klass — OHLC-optimised, ~7.4× more efficient. Assumes zero drift, no gaps. Log-return scale. • Rogers-Satchell — Drift-independent, handles trending markets where Parkinson/GK become biased. Log-return scale. • Yang-Zhang — Gap-aware composite, most comprehensive (up to 14× efficient). Uses internal rolling variance (unsmoothed). Log-return scale. • Std Dev — Standard deviation of log returns. Log-return scale. • ATR — Average True Range in absolute price units. Useful for stop-loss placement. Price unit scale. • Chaikin — Rate of change of range. Measures volatility expansion/contraction, not level. Percentage scale. Smoothing Filters (10 options via FiltersToolkit): • SMA / EMA — Classical moving averages • Super Smoother (2-Pole / 3-Pole) — Ehlers IIR filter with excellent noise reduction • Ultimate Smoother (2-Pole / 3-Pole) — Near-zero lag in passband • BiQuad — Second-order IIR with configurable Q factor • ADXvma — Adaptive smoothing, flat during ranging periods • MAMA — MESA Adaptive Moving Average (cycle-adaptive) • A2RMA — Adaptive Autonomous Recursive MA Threshold Modes: • Static — Fixed threshold values you define (e.g., 0.025 annualised) • Dynamic — Adaptive bands: baseline ± (standard deviation × multiplier) • Percentile — Threshold at Nth percentile of recent history (e.g., 80th percentile for high) Visual Features: • Level-based colour gradient — Line colour shifts with percentile rank (warm = high vol, cool = low vol) • Fill to zero — Gradient fill intensity proportional to volatility level • Threshold fills — Intensity-scaled fills when thresholds are breached • Regime background — Chart background indicates HIGH/NORMAL/LOW volatility state • Legend table — Displays estimator names, parameters, current values with percentile ranks (P##) 💮 Dual Estimator Slots Compare two volatility estimators side-by-side. Each slot independently configures: • Estimator type (8 options across three scale groups) • Lookback period and smoothing filter • Colour palette and visual style This enables direct comparison between estimators (e.g., Yang-Zhang vs Rogers-Satchell) or between different parameterisations of the same estimator. ↑ Yang-Zhang (reddish) and Rogers-Satchell (greenish) 💮 Flexible Smoothing via FiltersToolkit All estimators (except Yang-Zhang, which uses internal rolling variance) support configurable smoothing through 10 filter types. Using Infinite Impulse Response (IIR) filters instead of SMA avoids the "drop-off artefact" where volatility readings crash when old spikes exit the window. Example: Same estimator (Parkinson) with different smoothing filters Add two instances of Volatility Toolkit to your chart: • Instance 1: Parkinson with SMA smoothing (lookback 14) • Instance 2: Parkinson with Super Smoother 2-Pole (lookback 14) Notice how SMA creates sharp drops when volatile bars exit the window, while Super Smoother maintains a gradual transition. ↑ Two Parkinson estimators — SMA (red mono-colour, showing drop-off artefacts) vs Super Smoother (turquoise mono colour, with smooth transitions) ↑ Garman-Klass with BiQuad (orangy) and 2-pole SuperSmoother filters (greenish) 💮 Weighted Aggregation Combine multiple estimators into a single weighted average. The indicator automatically: • Validates scale compatibility (only same-scale estimators can be aggregated) • Normalises weights (so 2:1 means 67%:33%) • Displays clear warnings when scales differ Example: Robust volatility estimate Combine Yang-Zhang (handles gaps) with Rogers-Satchell (handles drift) using equal weights: • E1: Yang-Zhang (14) • E2: Rogers-Satchell (14) • Aggregation: Enabled, weights 1:1 The aggregated line (with "fill to zero" enabled) provides a more robust estimate by averaging two complementary methodologies. ↑ Yang-Zhang + Rogers-Satchell with aggregation line (thicker) showing combined estimate (notice how opening gaps are handled differently) Example: Trend-weighted aggregation In strongly trending markets, weight Rogers-Satchell more heavily since it's drift-independent: • Estimator 1: Garman-Klass (faster, higher weight in ranging) • Estimator 2: Rogers-Satchell (drift-independent, higher weight in trends) • Aggregation: weights 1:2 (favours RS during trends) 💮 Adaptive Threshold Detection Three threshold modes for identifying volatility regime shifts. Threshold breaches are visualised with intensity-scaled fills that grow stronger the further volatility exceeds the threshold. Example: Dynamic thresholds for regime detection Configure dynamic thresholds to automatically adapt to market conditions: • High Threshold Mode: Dynamic (baseline + 2× std dev) • Low Threshold Mode: Dynamic (baseline - 2× std dev) • Show threshold fills: Enabled This creates adaptive bands that widen during volatile periods and narrow during calm periods. Example: Percentile-based thresholds Use percentile mode for context-aware regime detection: • High Threshold Mode: Percentile (96th) • Low Threshold Mode: Percentile (4th) • Percentile Lookback: 500 This identifies when volatility enters the top/bottom 4% of its recent distribution. ↑ Different threshold settings, where the dynamic and percentile methods show adaptive bands that widen during volatile periods, with fill intensity varying by breach magnitude. Regime detection (see next) is enabled too. 💮 Regime Background Colouring Optional background colouring indicates the current volatility regime: • High Volatility — Warm/alert background colour • Normal — No background (neutral) • Low Volatility — Cool/calm background colour Select which source (Estimator 1, Estimator 2, or Aggregation) drives the regime display. Example: Regime filtering for trade decisions Use regime background to filter trading signals from other indicators: • Regime Source: Aggregation • Background Transparency: 90 (subtle) When the background shows HIGH volatility (warm), consider tighter stops. When LOW (cool), watch for breakout setups. ↑ Regime background emphasis for breakout strategies. Note the interesting A2RMA smoothing for this case. 🌸 --------- USAGE GUIDE --------- 🌸 💮 Getting Started 1. Add the indicator to your chart 2. Estimator 1 defaults to Yang-Zhang (14) — the most comprehensive estimator for gapped markets 3. Keep "Annualise Volatility" enabled to express values in standard annualised form 4. Observe the legend table for current values and percentile ranks (P##). Hover over the table cells to see a little more info in the tooltip. 💮 Choosing an Estimator • Trending equities with gaps — Yang-Zhang. Handles both drift and overnight gaps optimally. • Crypto (24/7 trading) — Rogers-Satchell. Drift-independent without Yang-Zhang's multi-period lag. • Ranging markets — Garman-Klass or Parkinson. Simpler, no drift adjustment needed. • Price-based stops — ATR. Output in price units, directly usable for stop distances. • Regime detection — Combine any estimator with threshold modes enabled. 💮 Interpreting Output • Value (P##) — The volatility reading with percentile rank. "0.1523 (P75)" means 0.1523 annualised volatility at the 75th percentile of recent history. • Colour gradient — Warmer colours = higher percentile (elevated volatility), cooler colours = lower percentile. • Threshold fills — Intensity indicates how far beyond the threshold the current reading is. • ⚠️ HIGH / 🔻 LOW — Table indicators when thresholds are breached. 🌸 --------- ALERTS --------- 🌸 💮 Direction Change Alerts • Estimator 1/2 direction change — Triggers when volatility inflects (rising to falling or vice versa) 💮 Cross Alerts • E1 crossed E2 — Triggers when the two estimator lines cross 💮 Threshold Alerts • E1/E2/Aggr High Volatility — Triggers when volatility breaches the high threshold • E1/E2/Aggr Low Volatility — Triggers when volatility falls below the low threshold 💮 Regime Change Alerts • E1/E2/Aggr Regime Change — Triggers when the volatility regime transitions (High ↔ Normal ↔ Low) 🌸 --------- LIMITATIONS --------- 🌸 • Drift bias in Parkinson/GK — These estimators overestimate variance in trending conditions. Switch to Rogers-Satchell or Yang-Zhang for trending markets. • Yang-Zhang minimum lookback — Requires at least 2 bars (enforced internally). Cannot produce instantaneous readings like other estimators. • Flat candles — Single-tick bars produce near-zero variance readings. Use higher timeframes for illiquid assets. • Discretisation bias — Estimates degrade when ticks-per-bar is very small. Consider higher timeframes for thinly traded instruments. • Scale mixing — Different scale groups (log-return, price unit, percentage) cannot be meaningfully compared or aggregated. The indicator warns but does not prevent display. 🌸 --------- CREDITS --------- 🌸 💮 Academic Sources • Parkinson, M. (1980). The Extreme Value Method for Estimating the Variance of the Rate of Return. Journal of Business, 53 (1), 61–65. DOI • Garman, M.B. & Klass, M.J. (1980). On the Estimation of Security Price Volatilities from Historical Data. Journal of Business, 53 (1), 67–78. DOI • Rogers, L.C.G. & Satchell, S.E. (1991). Estimating Variance from High, Low and Closing Prices. Annals of Applied Probability, 1 (4), 504–512. DOI • Yang, D. & Zhang, Q. (2000). Drift-Independent Volatility Estimation Based on High, Low, Open, and Close Prices. Journal of Business, 73 (3), 477–491. DOI • Wilder, J.W. (1978). New Concepts in Technical Trading Systems . Trend Research. 💮 Libraries Used • VolatilityToolkit Library — Range-based estimators, smoothing, and aggregation functions • FiltersToolkit Library — Advanced smoothing filters (Super Smoother, Ultimate Smoother, BiQuad, etc.) • ColourUtilities Library — Colour palette management and gradient calculations
Pine Script® indicator
by GoemonYae
YUSUF KARA YZLM Moving Average and Buy/Sell SignalsThis indicator is a comprehensive technical analysis tool that combines dynamic trend tracking and a multiple moving average system. It offers four different moving average lines along with pivot points and an ATR (Average True Range) based trailing stop system. Features 1. Dynamic Trend Following System Center calculation based on pivot points (high/low) Adjustable trailing stop levels with ATR factor Automatic BUY and SELL signals Colored line according to trend direction (Green: Uptrend, Red: Downtrend) 2. Multiple Moving Average System 4 different periods (default: 10, 50, 100, 200) 4 different calculation methods: EMA (Exponential Moving Average) SMA (Simple Moving Average) WMA (Weighted Moving Average) HMA (Hull Moving Average) Same calculation method or source selection for all periods Parameters Trend Following Settings: Pivot Point Period (2): Calculation period of pivot points ATR Factor (3): ATR multiplier that determines the trailing stop width ATR Period (10): ATR calculation Period Moving Average Settings: Period Type: Select EMA, SMA, WMA, or HMA Period Type: Data source (Close, Open, High, Low, etc.) Periods 1-4: Moving average periods How to Use Trend Signals: BUY tag: Beginning of an uptrend (green) SELL tag: Beginning of a downtrend (red) The trend line shows the trailing stop level Moving Averages: Blue (10), Black (50), Orange (100), Red (200) Can be used to identify support/resistance levels and trend direction Crossovers are important signal points Strategy Suggestions BUY signal + price above moving averages = Strong buy SELL signal + price below moving averages = Strong sell The trend line can be used as a stop-loss level Moving average crossovers confirm trend changes Warnings Each signal means a profitable trade It will not come. Risk management should always be applied. It is recommended to use it together with other indicators and analysis methods. Past performance does not guarantee future results.
Pine Script® indicator
by noertz
7
VIXO - VIX OscillatorVIXO (VIX Oscillator) is a volatility oscillator built from the CBOE Volatility Index (symbol: TVC:VIX). It helps visualize volatility regime shifts by combining a smoothed VIX RSI with a normalized VIX momentum component, plus a VIX histogram that becomes more/less prominent depending on how far VIX is from its moving average. It helps you assess whether market conditions may be approaching rare but powerful squeeze phases. WHAT THIS INDICATOR PLOTS 1) VIX RSI (cyan line) - RSI is calculated on the VIX close and then smoothed (SMA) to reduce noise. - Use it to observe short-term momentum in volatility rather than price. 2) VIX Normalized Momentum (gray line) - Momentum is measured as ROC (rate of change) of the VIX close. - That ROC is normalized to a 0–100 scale using a rolling lookback window: - 50 is the midpoint of the recent momentum range (neutral within the selected window). - Values near 0/100 indicate momentum near the low/high of that lookback window. 3) VIX Value Bars (histogram) - Histogram shows the raw VIX value. - Bar visibility is dynamically adjusted (transparency changes) based on the ratio of VIX to its 21-period SMA: - When VIX is close to its MA, bars are more transparent. - When VIX deviates more from its MA (within a capped range), bars become more visible. - If VIX High is below 30, the script intentionally keeps bars fully transparent to reduce visual clutter. LEVELS (REFERENCE ONLY) The horizontal levels are visual guides to help segment oscillator zones. They are not guarantees and should not be treated as standalone trade signals: - 80: “Panic of Market” - 60: “VIX says BUY” (label only; not financial advice) - 50: “Neutral / Momentum Mid” - 40: “Get Ready” HOW TO USE - Apply VIXO to any chart. The indicator always pulls TVC:VIX data, regardless of the chart symbol. - Typical interpretation: - Rising VIX RSI and/or rising normalized momentum can indicate increasing volatility pressure. - Falling readings can indicate volatility easing. - Compare changes in VIXO with your chart’s price structure, trend filters, or risk management framework. INPUTS - RSI Length: RSI period on VIX close (smoothed afterward). - Momentum Length: ROC period on VIX close. - Momentum Normalization Lookback: window used to scale ROC into 0–100. DATA & BEHAVIOR NOTES - Data source: request.security("TVC:VIX", timeframe.period, OHLC). - The script does not use lookahead to access future data. - On realtime bars, values can update while the current bar is forming; historical bars remain fixed once closed. - Availability of TVC:VIX data depends on your TradingView data access. IMPORTANT DISCLAIMER This indicator is provided for educational and informational purposes only and does not constitute financial, investment, or trading advice. It does not predict the future, does not guarantee results, and should not be used as the sole basis for any trading decision. Always validate signals with additional analysis and use appropriate risk management.
Pine Script® indicator
by emreiletrade
JXMJXRS - Momentum Decay Analysis [MDA]Momentum Decay Analysis is a novel indicator that measures how quickly momentum fades after significant price impulses. Rather than measuring momentum at a single point in time like traditional oscillators, MDA tracks the decay behavior of momentum over subsequent bars, providing insight into whether a move has continuation strength or is exhausting. The Concept Every impulse move eventually loses steam. The rate at which this happens tells you a lot about the quality of the move: Slow decay suggests strong underlying conviction and higher probability of continuation Fast decay indicates weak momentum that is likely to reverse or consolidate Accelerating decay warns of exhaustion setting in Decelerating decay signals momentum may be rebuilding This concept borrows from physics, specifically the mathematics of exponential decay and half-life calculations used in fields like nuclear physics and pharmacology. How It Works The indicator detects impulse moves using a standard deviation threshold above average momentum After each impulse, it tracks how the momentum magnitude changes over subsequent bars Using exponential regression, it calculates the decay constant and derives a half-life value These metrics combine into a single Decay Health score that drives the visual output Reading the Indicator The indicator displays as a dynamic EMA line with expanding and contracting bands: Green coloring indicates healthy momentum with slow decay, suggesting continuation Gray coloring indicates normal decay, a neutral state Red coloring indicates rapid decay and potential exhaustion Band width reflects the decay health. Wider bands suggest stronger, more sustained momentum. Narrower bands indicate weakening momentum. Small diamond markers appear when new impulses are detected. Green diamonds below price mark bullish impulses. Red diamonds above price mark bearish impulses. Settings Impulse Detection Length: Lookback period for calculating average momentum and standard deviation Decay Measurement Window: Number of bars over which decay is measured after an impulse Impulse Threshold: How many standard deviations above average qualifies as an impulse Smoothing: Smoothing applied to the final decay health output Band Width: Multiplier controlling the width of the bands Base EMA Length: Period for the central EMA line Display toggles allow you to show or hide the band fill, impulse signals, and info table. Use Cases Identifying when a strong move is losing steam before price reverses Confirming breakouts by checking if momentum decay is healthy Filtering entries by only trading when decay health supports your direction Spotting divergences between price action and momentum sustainability Timeframes This indicator works on any timeframe but is designed primarily for 1 hour and above. Higher timeframes generally produce cleaner signals with less noise. Notes This indicator is intended as an analytical tool to supplement your existing strategy. It does not provide explicit buy or sell signals. No indicator guarantees profitable results. Always use proper risk management and confirm signals with price action and other forms of analysis.
Pine Script® indicator
by jxmjxrs
Compression-to-Expansion Early Warning (CEEWS)The Compression → Expansion Early Warning System (CEEWS) is a volatility-structure and market-timing indicator designed to identify periods of statistical price compression and to signal when that compression transitions into directional expansion. Rather than predicting direction in advance, CEEWS focuses on detecting when price action becomes tightly constrained and then confirms when stored energy begins to release. CEEWS quantifies compression using a composite of volatility contraction, range tightening, candle overlap, and reference-level convergence, producing a normalized Build score (0–100) that reflects the degree of latent price pressure. Elevated Build values indicate that the market is coiled and increasingly susceptible to movement, while expansion signals occur only when volatility begins to expand and price breaks from its recent range. The indicator is intended as a timing and transition tool, not a standalone trend or directional system. CEEWS is most effective when paired with broader regime or trend-health indicators and is particularly well suited for index funds and highly liquid markets, where prolonged consolidation phases often precede sharp directional moves. Its primary purpose is to help traders identify when the market is likely to move, not to forecast where it will go.
Pine Script® indicator
by MatrixResearch
Simple Price Envelopes [Clean & Multi-Band]Es muy sencillo. En el mismo cuadro de "Descripción" donde pegaste el texto, tienes que poner **primero todo el bloque en inglés** y **justo debajo** el bloque en español. TradingView solo lee las primeras líneas para comprobar el idioma. Si ve inglés al principio, te dejará pasar. **Haz esto:** 1. Borra lo que tengas ahora en la descripción. 2. Copia **todo** el texto que te pongo aquí abajo (ya incluye el inglés primero, una línea separadora y luego el español). 3. Pégalo en la caja y dale a Publicar. --- **Simple Price Envelopes ** **Summary** This is a Price Envelope indicator designed with a "less is more" philosophy. Unlike Bollinger Bands or traditional Envelopes that clutter the chart with historical lines, this tool focuses exclusively on **Real-Time Price Action**. It displays up to 3 dynamic support and resistance levels based on a percentage distance from the current price, keeping the chart spotless and distraction-free. **Key Features** * **Absolute Visual Cleanliness:** Uses a rendering system that only shows current levels. No historical trails ("noise") when scrolling back. * **Compact Interface:** Optimized configuration in a single line per band (Active | % | Width). * **Multi-Band:** Ability to configure up to 3 independent reversion zones simultaneously. * **Extreme Efficiency:** Code optimized in Pine Script v6 for minimal resource consumption and zero lag. * **Clear Information:** * Native price labels on the scale (Y-Axis). * Floating labels with deviation percentage. **Configuration** The settings panel has been simplified for quick control: 1. **Global Settings:** Define your preferred colors for upper (resistance) and lower (support) levels. 2. **Bands 1, 2, and 3:** Each band has its own row where you can: * Toggle the band On/Off. * Define the exact percentage distance. * Adjust the visual dot thickness. **Who is this indicator for?** Ideal for **Scalping** and **Day Trading** traders looking for mean reversions or volatility breakouts who need to keep their chart clean to analyze market structure without lines obstructing past candles. ---
Pine Script® indicator
by JorgeCIC
[CT] Daily & Weekly Percentage Price Oscillator Daily & Weekly Percentage Price Oscillator, or D&W PPO, is a dual-speed momentum oscillator that blends a slower “weekly-style” percentage oscillator with a faster “daily-style” percentage oscillator, then turns the relationship between them into a clean histogram that is easy to trade. The script builds four EMAs from the chart’s close. The first pair, L1 and L2, is used to create the W component, which behaves like a slow, higher-timeframe trend pressure line. W is calculated as the percentage distance between EMA(L1) and EMA(L2), normalized by EMA(L2). When W is rising and positive, it tells you the broader momentum is expanding upward, and when W is falling and negative, the broader momentum is expanding downward. The second pair, L3 and L4, creates the D component, which behaves like a faster, lower-timeframe momentum pulse, also expressed as a percentage but normalized by the same EMA(L2), so both components share a consistent “scale.” The script then combines them into R = W + D, which represents the total blended momentum, where W supplies the slow structure and D supplies the fast impulse. The indicator is plotted as a histogram using “R − W,” and that choice is intentional. Because R = W + D, the histogram value “R − W” is mathematically identical to D. In other words, the columns you see are the fast momentum component, but anchored to a clear baseline that reflects whether the fast component is adding to, or subtracting from, the slower component’s trend context. The zero line is the equilibrium point where R equals W, meaning the fast component is neutral relative to the slow trend context. When the histogram is above zero, the fast component is contributing positive momentum and the script colors the columns with the Bull color, indicating that R is above W and the short-term push is aligned to the upside. When the histogram is below zero, the fast component is contributing negative momentum and the script colors the columns with the Bear color, indicating that R is below W and the short-term push is aligned to the downside. If you enable “Color price bars,” the chart candles are painted with the same logic so you can visually stay in sync with the fast momentum regime without staring at the panel. How to trade it comes down to treating the histogram as your actionable trigger layer and using its behavior around the zero line as the decision boundary. A basic long framework is to prioritize long trades when the histogram is above zero and either expanding or printing consecutive positive columns, because that tells you the fast momentum pulse is supportive and not fighting the current regime. The cleanest long entries usually occur when the histogram flips from negative to positive and holds above zero for at least a bar or two, because that transition often marks the shift from pullback pressure into renewed upside impulse. You can add selectivity by watching for a “dip and re-strengthen” pattern above zero: after a positive run, the histogram contracts toward the baseline without breaking materially below it, then turns back up, which often corresponds to a controlled pullback followed by continuation. A basic short framework is the mirror image: prioritize shorts when the histogram is below zero and expanding downward, and treat flips from positive to negative that hold below zero as the higher-quality transition into downside impulse. In both directions, the histogram is especially useful for avoiding trades during momentum dead zones, because when columns chop tightly around the zero line with frequent flips, it is signaling indecision and a lack of clean directional impulse, which is where most “false starts” tend to happen. Risk management with this tool is straightforward because the oscillator gives you a natural invalidation concept. For long trades, a common invalidation is the histogram losing the zero line and staying negative, since that indicates the fast component has turned from supportive to opposing. For short trades, invalidation is the histogram regaining the zero line and holding positive. Another practical way to manage trades is to use histogram contraction as an early warning that the impulse is weakening. If you are long and positive columns begin to shrink toward zero for several bars, you can tighten risk, take partials, or wait for a fresh expansion before adding. If you are short and negative columns begin to shrink toward zero, the same concept applies. The optional W line can be shown if you want a visual anchor of the slow component; while the histogram is already built to reflect the fast component relative to the slow context, viewing W can help you quickly recognize whether the larger momentum backdrop is generally rising or falling, which can be used as an additional bias filter for trade selection. In practice, the D&W PPO is best used as a momentum alignment and timing tool: the slow component defines the “weather,” the fast component defines the “wind,” and the histogram tells you whether the wind is pushing with the weather or pushing against it. When the histogram is cleanly one-sided and expanding, it supports continuation-style trading and trend-following entries. When the histogram is choppy around zero, it warns you that conditions are rotational and patience usually pays.
Pine Script® indicator
by ChaosTrader63
Simple Price Envelopes [Clean & Multi-Band]Summary This is a Price Envelope indicator designed with a "less is more" philosophy. Unlike Bollinger Bands or traditional Envelopes that clutter the chart with historical lines, this tool focuses exclusively on Real-Time Price Action. It displays up to 3 dynamic support and resistance levels based on a percentage distance from the current price, keeping the chart spotless and distraction-free. Key Features Absolute Visual Cleanliness: Uses a rendering system that only shows current levels. No historical trails ("noise") when scrolling back. Compact Interface: Optimized configuration in a single line per band (Active | % | Width). Multi-Band: Ability to configure up to 3 independent reversion zones simultaneously. Extreme Efficiency: Code optimized in Pine Script v6 for minimal resource consumption and zero lag. Clear Information: Native price labels on the scale (Y-Axis). Floating labels with deviation percentage. Configuration The settings panel has been simplified for quick control: Global Settings: Define your preferred colors for upper (resistance) and lower (support) levels. Bands 1, 2, and 3: Each band has its own row where you can: Toggle the band On/Off. Define the exact percentage distance. Adjust the visual dot thickness. Who is this indicator for? Ideal for Scalping and Day Trading traders looking for mean reversions or volatility breakouts who need to keep their chart clean to analyze market structure without lines obstructing past candles.
Pine Script® indicator
by JorgeCIC
Minervini Ultimate +VCPMinervini Ultimate Suite (SEPA Dashboard) This indicator implements Mark Minervini's "Trend Template" criteria combined with a Volatility Contraction Pattern (VCP) detector and a custom Relative Strength rating. It is designed to help traders visualize the technical health of a stock based on stage analysis concepts. This indicator serves as a complete Control System (Dashboard) for Mark Minervini's SEPA trading strategy. Instead of manually checking five different metrics on every chart, this indicator performs the mathematical calculations and presents the "bottom line" in a single, organized table. 1. What This Indicator Does The goal is to ensure you never enter a trade blindly. It verifies the stock against Minervini's strict requirements: Trend: Is the stock in a healthy Stage 2 Uptrend? Relative Strength: Is it stronger than the general market? Buy Risk: Is it the right time to buy, or is the price extended? Pressure: Are institutions accumulating or distributing? VCP: Is there a breakout opportunity (volatility contraction) right now? 2. Key Benefits Time-Saving: Instead of drawing lines and calculating percentages manually, you get immediate visual feedback (Green/Red). Discipline: The indicator will flag "Extended" (Red) if you attempt to buy a stock that has run up too much, saving you from late entries and unnecessary losses. Precision Timing: The VCP feature (Blue Dots) helps you identify the "calm before the storm"—the exact moment volatility contracts, which often precedes a major breakout. 3. Indicator Parameters & Features A. Minervini Pressure (Buying vs. Selling) What it checks: Money flow over the last 20 days. Calculation: Sums up volume on "Up Days" (Green) versus volume on "Down Days" (Red). Meaning: 🟢 Buying: More money is entering than leaving. A sign of institutional accumulation. 🔴 Selling: Selling pressure dominates. The price may be rising, but without strong volume backing. B. Buy Risk (Price Extension) What it checks: The distance of the current price from the 50-Day Moving Average. Minervini strictly warns against "chasing" stocks. Signals: 🟢 Low Risk: Price is within 0% – 15% of the 50MA. This is the ideal "Buy Zone". 🟡 Caution: Price is 15% – 25% away. Buy with increased caution. 🔴 Extended: Price is >25% from the MA. Do not buy. The probability of a pullback is high. ⚪ Broken: Price is below the 50MA. The short-term trend is damaged. C. TPR - Trend Template (Trend Power Rating) What it checks: Is the stock in a Stage 2 Uptrend? Strict Rules (All must be true for a PASS): Price > 50MA > 150MA > 200MA. The 200MA is trending UP (positive slope). Price is near the 52-Week High (within 25%). Price is above the 52-Week Low (at least 25%). Meaning: 🟢 PASSED: Technically healthy and ready to move. 🔴 FAILED: The trend structure is broken (e.g., MAs are entangled). D. RPR Score (Relative Performance Rating) What it checks: How strong the stock is compared to the general market (S&P 500 / SPY). Calculation: Weighted performance over 3, 6, 9, and 12 months vs. the SPY. The score ranges from 1 to 99. Meaning: 🟢 80-99: Market Leader. These are the stocks Minervini targets. 🟡 70-80: Good, but not elite. ⚪ Below 70: Laggard (weaker than the market). E. VCP Action (Volatility Contraction Pattern) What it checks: Monitors price tightness. It calculates the range between the highest close and lowest close over the last 5 days. Meaning: 🔵 SQUEEZE (Blue Text + Blue Dot on Chart): The price range has contracted to less than 2.5%. Why it matters: When a stock stops moving wildly and trades in a tight range ("Flat Line"), it indicates supply has dried up. A high-volume breakout often follows immediately.
Pine Script® indicator
by noam73
2
Smart Money Breakouts [another version]Smart Money Breakouts — Structure-Based Breakout & Risk Engine Smart Money Breakouts is a deterministic, structure-driven breakout system built around BOS / CHoCH detection, conservative execution logic, and post-entry risk management. The script follows a strict candidate-based entry model inspired by institutional price structure — without repainting and without retroactive signal changes. This tool is designed for systematic traders and automation users who want consistent execution logic, objective structure confirmation, and machine-readable alerts suitable for external trade processing. Core Concept The indicator detects: • Swing BOS (Break of Structure) • Swing CHoCH (Change of Character) • Internal impulse structure • Valid breakout legs Every BOS / CHoCH event creates a trade candidate. A candidate remains valid only for a limited time window. Entry is allowed only on the first bar after the confirmed structure break. If the candidate expires — the trade is skipped. This prevents: • late entries • structure drift execution • chasing consolidation breakouts All signals are generated on bar close and the script does not repaint. Structure-Anchored TP / SL (Entry-Centric) Risk parameters are calculated after entry, using the nearest valid structure anchor. For each trade: • BOS / CHoCH → structure window • price extreme is detected inside the window • structure distance is measured • TP / SL are derived proportionally If structure distance cannot be resolved, an ATR-based fallback is used to avoid undefined risk. TP1 is optional and acts as a break-even activation trigger. The indicator does not filter trades using TP/SL logic — risk handling occurs only after entry. Obstacle-Aware Adaptive Targeting The script includes a lightweight structural obstacle detector: • scans recent swing pivots • checks for opposing structure inside the TP path • if an obstacle is closer than TP — TP is adapted • SL is recalculated proportionally to maintain RR consistency This improves execution robustness in: • liquidity absorption zones • frontal resistance clusters • local structural ceilings Trades that are too small after adaptation may be rejected. Built-In Filters (Fully Optional) All filters can be enabled/disabled: • Volume bias filter • Higher-Timeframe direction bias • Multi-Timeframe structure bias • Dead-session / low-liquidity filter • Minimum swing size filter • Minimum spread / volatility filter • Max TP/SL distance • Minimum viable trade size The script does not pull external market data — all logic is chart-native. Break-Even & Exit Priority Break-even activates only after TP1 is hit and is applied on the next bar to avoid intrabar ambiguity. Execution order is deterministic: Stop-Loss TP1 / Break-Even TP2 (full target) Only one outcome may occur per bar. This eliminates conflicting intrabar states and ensures reproducible backtests. Alerts & Automation Alerts are emitted only on confirmed entry signals. Payloads export structured values: • entry price • TP1 • TP2 • SL • symbol / exchange / timeframe / timestamp The indicator does not execute trades. Automation must be handled externally by the user. Important Notes This script: • does not guarantee profitability • is not financial advice • should be forward-tested before live use • is intended as a decision-support & execution framework Trading involves risk — structure behavior does not imply future outcomes.
Pine Script® indicator
by Selwest
Adaptive Quant RSI [ML + MTF]This is an advanced momentum indicator that integrates Machine Learning (K-Means Clustering) with Multi-Timeframe (MTF) analysis. Unlike traditional RSI which uses fixed 70/30 levels, this script dynamically calculates support and resistance zones based on real-time historical data distribution. Key Features: 🤖 ML Dynamic Thresholds: Uses K-Means clustering to segment RSI data into clusters, automatically plotting dynamic long/short thresholds that adapt to market volatility. ⏳ MTF Trend Background: The background color changes based on a Higher Timeframe (e.g., 5-min) RSI trend, helping you align with the broader market direction. 📊 Extreme Statistics: Incorporates percentile analysis (95th/5th) and historical pivots to identify extreme overbought/oversold conditions with high reversal probability. 📈 Probability Analysis: Displays the statistical probability of the current RSI value being at the top or bottom of its historical range. Usage: Look for confluence between the dynamic ML thresholds and the MTF background color to identify high-probability reversal setups.
Pine Script® indicator
by tkwatck
IV Rank & Percentile Suite V1.0What This Indicator Does The IV Rank & Percentile Suite provides the volatility context options traders need to time entries. It calculates two complementary metrics—IV Rank and IV Percentile—using historical volatility as a proxy, then displays clear visual zones to identify favorable conditions for premium selling strategies. Stop guessing if volatility is "high" or "low." This indicator tells you exactly where current volatility sits relative to recent history. The Two Metrics Explained IV Rank (0-100) Measures where current volatility sits within its 52-week high-low range. IV Rank = (Current HV - 52w Low) / (52w High - 52w Low) × 100 70 means current volatility is 70% of the way between the yearly low and high Sensitive to extreme spikes (a single high reading affects the range) IV Percentile (0-100) Measures what percentage of days in the lookback period had lower volatility than today. IV Percentile = (Days with lower HV / Total days) × 100 70 means volatility was lower than today on 70% of days in the past year More stable, less affected by outlier spikes Why Both? IV Rank reacts faster to volatility changes. IV Percentile is more stable and statistically robust. When both agree (e.g., both above 50), you have stronger confirmation. Divergence between them can signal transitional periods. Zone System The indicator divides readings into three zones: Zone ------- Default Range ---- Meaning ------------------ Premium Selling 🟢 High ≥ 50 Elevated volatility Favorable 🟡 Neutral 25-50 Normal volatility Selective 🔴 Low ≤ 25 Compressed volatility Avoid An additional Extreme threshold (default 75) highlights prime conditions when volatility is significantly elevated. Zone thresholds are fully customizable in settings. How to Use It For Premium Sellers (Iron Condors, Credit Spreads, Strangles) Wait for IV Rank to enter the green zone (≥50) Confirm IV Percentile agrees (also elevated) Enter premium selling positions when both metrics align Avoid initiating new positions when in the red zone For Premium Buyers (Long Options, Debit Spreads) Low IV Rank/Percentile means cheaper options Red zone can favor directional debit strategies Avoid buying premium when both metrics are in the green zone General Principle: Sell premium when volatility is high (it tends to revert to mean). Buy premium when volatility is low (if you have a directional thesis). Inputs Volatility Calculation HV Period — Lookback for historical volatility calculation (default: 20) Trading Days/Year — 252 for stocks, 365 for crypto Lookback Periods IV Rank Lookback — Period for high/low range (default: 252 = 1 year) IV Percentile Lookback — Period for percentile calculation (default: 252) Zone Thresholds High IV Zone — Readings above this are highlighted green (default: 50) Low IV Zone — Readings below this are highlighted red (default: 25) Extreme High — Threshold for "prime" conditions alert (default: 75) Display Options Toggle IV Rank, IV Percentile, and raw HV display Show/hide zone backgrounds Show/hide info panel Panel position selection Info Panel The panel displays: Field ------- Description IV Rank ------- Current reading with color coding IV Pctl ------- Current percentile with color coding HV 20d ------- Raw historical volatility percentage 52w Range ------- Lowest to highest HV in lookback period Zone ------- Current zone status Premium ------- Signal quality for premium selling Lookback ------- Days used for calculations R/P Spread ------- Difference between Rank and Percentile Alerts Six alerts are available: Zone Transitions IV Entered High Zone — Favorable for premium selling IV Reached Extreme Levels — Prime conditions IV Dropped to Low Zone — Caution for premium sellers Threshold Crosses IV Rank Crossed Above High Threshold IV Rank Crossed Below Low Threshold IV Percentile Above 75 IV Percentile Below 25 Set up alerts to get notified when conditions change without watching charts. Technical Notes Volatility Calculation Method This indicator uses close-to-close historical volatility as an IV proxy: Calculate log returns: ln(Close / Previous Close) Take standard deviation over HV Period Annualize: multiply by √(Trading Days) This method correlates well with implied volatility for most liquid instruments. On highly liquid options underlyings (SPY, QQQ, major stocks), HV and IV tend to move together, making this a reliable proxy for IV Rank analysis. Non-Repainting All calculations use confirmed bar data. Values are fixed once a bar closes. Lookback Requirement The indicator needs sufficient history to calculate accurately. For a 252-day lookback, ensure your chart has at least 300+ bars of data. Best Used On ETFs: SPY, QQQ, IWM, DIA Indices: SPX, NDX High-volume stocks: AAPL, TSLA, NVDA, AMD, META Timeframe: Daily (recommended), Weekly for longer-term view The indicator works on any instrument but is most meaningful on underlyings with active options markets. Important Notes ⚠️ This indicator uses historical volatility as a proxy for implied volatility. While HV and IV are correlated, they are not identical. For precise IV data, consult your options broker's platform. ⚠️ High IV Rank does not guarantee profitable premium selling. It indicates favorable conditions, not guaranteed outcomes. Position sizing and risk management remain essential. ⚠️ Past volatility patterns do not guarantee future behavior. Volatility regimes can shift, and historical ranges may not predict future ranges. Suggested Workflow Add to daily chart of your preferred underlying Set up alert for "IV Entered High Zone" When alerted, check both IV Rank and IV Percentile If both elevated, evaluate premium selling opportunities Use your broker's actual IV data for final entry decisions Questions? Leave a comment below.
Pine Script® indicator
by VolForge
2
Apex Adaptive Trend Navigator [Pineify]Apex Adaptive Trend Navigator The Apex Adaptive Trend Navigator is a comprehensive trend-following indicator that combines adaptive moving average technology, dynamic volatility bands, and market structure analysis into a single, cohesive trading tool. Designed for traders who want to identify trend direction with precision while filtering out market noise, this indicator adapts its sensitivity based on real-time market efficiency calculations. Key Features Adaptive Moving Average with efficiency-based smoothing factor Dynamic ATR-based volatility bands that expand and contract with market conditions Market Structure detection including BOS (Break of Structure) and CHoCH (Change of Character) Real-time performance dashboard displaying trend status and efficiency metrics Color-coded cloud visualization for intuitive trend identification How It Works The core of this indicator is built on an Adaptive Moving Average that uses a unique efficiency-based calculation method inspired by the Kaufman Adaptive Moving Average (KAMA) and TRAMA concepts. The efficiency ratio measures the directional movement of price relative to total price movement over the lookback period: Efficiency = |Price Change over N periods| / Sum of |Individual Bar Changes| This ratio ranges from 0 to 1, where values closer to 1 indicate a strong trending market with minimal noise, and values closer to 0 indicate choppy, sideways conditions. The smoothing factor is then squared to penalize noisy markets more aggressively, causing the adaptive line to flatten during consolidation and respond quickly during strong trends. The Dynamic Volatility Bands are calculated using the Average True Range (ATR) multiplied by a user-defined factor. These bands create a channel around the adaptive moving average, helping traders visualize the current volatility regime and potential support/resistance zones. Trading Ideas and Insights When price stays above the adaptive line with the bullish cloud forming, consider this a confirmation of uptrend strength The efficiency percentage in the dashboard indicates trend quality - higher values suggest more reliable trends Watch for price interactions with the upper and lower bands as potential reversal or continuation zones A flat adaptive line indicates consolidation - wait for a clear directional break before entering trades How Multiple Indicators Work Together This indicator integrates three complementary analytical approaches: The Adaptive Moving Average serves as the trend backbone, providing a dynamic centerline that automatically adjusts to market conditions. Unlike fixed-period moving averages, it reduces lag during trends while minimizing whipsaws during ranging markets. The ATR Volatility Bands work in conjunction with the adaptive MA to create a volatility envelope. When the adaptive line is trending and price remains within the cloud (between the MA and outer band), this confirms trend strength. Price breaking through the opposite band may signal exhaustion or reversal. The Market Structure Analysis using swing point detection adds a Smart Money Concepts (SMC) layer. BOS signals indicate trend continuation when price breaks previous swing highs in uptrends or swing lows in downtrends. CHoCH signals warn of potential reversals when the structure shifts against the prevailing trend. Unique Aspects The squared efficiency factor creates a non-linear response that dramatically reduces noise sensitivity Cloud fills only appear on the trend side, providing clear visual distinction between bullish and bearish regimes The integrated dashboard eliminates the need to switch between multiple indicators for trend assessment Pivot-based swing detection ensures accurate market structure identification How to Use Add the indicator to your chart and adjust the Lookback Period based on your trading timeframe (shorter for scalping, longer for swing trading) Monitor the cloud color - green clouds indicate bullish conditions, red clouds indicate bearish conditions Use the efficiency reading in the dashboard to gauge trend reliability before entering positions Consider entries when price pulls back to the adaptive line during strong trends (high efficiency) Use the volatility bands as dynamic take-profit or stop-loss reference levels Customization Lookback Period : Controls the sensitivity of trend detection and swing point identification (default: 20) Volatility Multiplier : Adjusts the width of the ATR bands (default: 2.0) Show Market Structure : Toggle visibility of BOS and CHoCH labels Show Performance Dashboard : Toggle the trend status table Color Settings : Customize bullish, bearish, and neutral colors to match your chart theme Conclusion The Apex Adaptive Trend Navigator offers traders a sophisticated yet intuitive approach to trend analysis. By combining adaptive smoothing technology with volatility measurement and market structure concepts, it provides multiple layers of confirmation for trading decisions. Whether you are a day trader seeking quick trend identification or a swing trader looking for reliable trend-following signals, this indicator adapts to your market conditions and trading style. The efficiency-based calculations ensure you always know not just the trend direction, but also the quality and reliability of that trend.
Pine Script® indicator
by Pineify
2
Standard Deviation Channel with SignalsStandard Deviation Channel with Signals This Pine Script is a **Standard Deviation Channel (or Linear Regression Channel) indicator** designed for TradingView. It automatically draws a channel around price action based on statistical deviation from a central linear regression trendline. Here is a breakdown of its key features: * **Trend Identification:** It calculates a linear regression line (the "mean" price) over a user-defined length (default 128 bars) to show the current trend direction. * **Volatility Bands:** It plots parallel upper and lower bands at specific standard deviations (e.g., ±1 and ±2 deviations) from the center line. These act as dynamic support and resistance levels. * **Actionable Signals:** It generates **"BUY"** signals when the price crosses below the lower deviation band (suggesting the asset is oversold) and **"SELL"** signals when the price crosses above the upper deviation band (suggesting it is overbought). This logic is based on a Mean Reversion strategy. * **Historical & Live Visualization:** Unlike standard versions that only show the channel for the *current* moment, this script plots the historical path of the bands so you can backtest visual signals, while also projecting the live channel forward for real-time analysis.
Pine Script® indicator
by mhpr1991
TradingIndicator Academy TIA - Pro Scalping System Beschrijving: Deze indicator is een geavanceerde scalping tool, specifiek ontwikkeld voor geautomatiseerde Bybit futures trading. De strategie is ontworpen om snelle prijs-reversals ("wicks") te vangen die buiten de standaard deviatie van de VWMA (Volume Weighted Moving Average) vallen. Het script combineert visuele analyse met volledige webhook-automatisering, waardoor handmatige fouten worden geëlimineerd en trades direct via JSON-commando's worden uitgevoerd. 🚀 Belangrijkste Kenmerken: ⚡ Wick Entry Strategie: Signalen worden gegenereerd wanneer de prijs (High/Low) agressief door de VWMA bands breekt. Dit duidt vaak op liquidaties of overreacties van de markt, gevolgd door een snelle correctie. 🤖 Volledige Automatisering: Ingebouwde, kant-en-klare JSON-alerts voor trading bots. Het script genereert automatisch payloads met side, size, leverage, en unieke UUIDs voor foutloze executie. 👁️ Smart Visuals: Dynamische TP/SL Boxen: Zodra een positie opent, toont de chart direct de Take Profit (groen) en Stop Loss (rood) zones. Deze boxen updaten real-time mee met de candle, zodat je altijd ziet waar je staat. Live Dashboard: Een tabel rechtsboven toont de actuele status van de bot, entry prijs, en targets. 🛡️ Risk Management: Ingebouwde (instelbare) logic voor Stoploss (standaard 2.5%) en Takeprofit (0.75%), visueel weergegeven om direct je Risk/Reward te beoordelen. 🛠️ Hoe te gebruiken: Voeg de indicator toe aan een 1m of 5m chart (bijv. crypto perpetuals). Vul in de instellingen je Bot / Alert UUIDs in (voor correcte order tracking). Maak een TradingView Alert aan: Condition: TIA - Pro Scalping System Trigger: Any alert() function call Webhook: De URL van je trading bot of webhook provider. Zet Min Liq Size op 0 voor alle signalen, of hoger om alleen trades met hoog volume te pakken. ⚠️ Disclaimer: Trading met leverage brengt risico's met zich mee. Deze tool is bedoeld ter ondersteuning van een geautomatiseerde strategie. Test resultaten altijd eerst met minimale size of in een demo-omgeving.
Pine Script® indicator
by Cryptoheaven42
Liquidation Bubbles [OmegaTools]🔴🟢 Liquidation Bubbles — Advanced Volume & Price Stress Detector Liquidation Bubbles is a professional-grade analytical tool designed to identify forced positioning events, stop-runs, and liquidation clusters by combining price displacement and volume imbalance into a single, statistically normalized framework. This indicator is not a repainting signal tool and not a simple volume spike detector. It is a contextual market stress mapper, built to highlight areas where one-sided positioning becomes unstable and the probability of forced order execution (liquidations, stops, margin calls) materially increases. --- ## 🔬 Core Concept Market liquidations do not occur randomly. They emerge when price deviates aggressively from its volume-weighted equilibrium while volume itself becomes abnormal. Liquidation Bubbles detects exactly this condition by: * Estimating a **dynamic equilibrium price** using an *inverted volume-weighted moving average* * Measuring **directional price stress** relative to that equilibrium * Measuring **volume stress** relative to its own adaptive baseline * Normalizing both into **Z-score–like metrics** * Highlighting only **statistically extreme, asymmetric events** The result is a clear visual map of stress points where market participants are most vulnerable. --- ⚙️ Methodology (How It Works) 1️⃣ Advanced Inverted VWMA (Equilibrium Engine) The script uses a custom Advanced VWMA, where: * High volume bars receive less weight * Low volume bars receive more weight This produces a **robust equilibrium level**, resistant to manipulation and volume bursts. This equilibrium is used for **both price and volume normalization**, creating a consistent statistical framework. --- 2️⃣ Price Stress (Directional) Price stress is calculated as: * The **maximum deviation** between high/low and equilibrium * Directionally signed (upside vs downside) * Normalized by its own historical volatility This allows the script to distinguish: * Aggressive upside exhaustion * Aggressive downside capitulation --- 3️⃣ Volume Stress Volume stress is measured as: * Deviation from volume equilibrium * Normalized by historical volume dispersion This filters out: * Normal high-volume sessions * Illiquid noise And isolates abnormal participation imbalance. --- 4️⃣ Liquidation Logic A liquidation event is flagged when: * Both price stress and volume stress exceed adaptive thresholds * The imbalance is directional and statistically extreme Optional Combined Score Mode allows aggregation of price & volume stress into a single composite metric for smoother signals. --- 🔵 Bubble System (Signal Hierarchy) The indicator plots **two tiers of bubbles**: 🟢🔴 Small Bubbles * Early warning stress points * Localized stop-runs * Micro-liquidations * Often precede reactions or short-term reversals 🟢🔴 Big Bubbles * Full liquidation clusters * Forced unwinds * High probability exhaustion zones * Frequently align with: * Intraday extremes * Range boundaries * Reversal pivots * Volatility expansions Bubble color: * **Green** → Downside liquidation (sell-side exhaustion) * **Red** → Upside liquidation (buy-side exhaustion) Bubble placement is **ATR-adjusted**, ensuring visual clarity without overlapping price. --- 🔄 Cross-Market Volume Analysis The script allows optional **external volume sourcing**, enabling: * Futures volume applied to CFDs * Index volume applied to ETFs * Spot volume applied to derivatives This is critical when: * Your traded instrument has unreliable volume * You want **institutional-grade confirmation** --- 🧠 How to Use Liquidation Bubbles This indicator is **not meant to be traded alone**. Best use cases: * 🔹 Confluence with support & resistance * 🔹 Contextual confirmation for reversals * 🔹 Identifying fake breakouts * 🔹 Liquidity sweep detection * 🔹 Risk management (avoid entering into liquidation zones) Ideal for: * Futures * Indices * Crypto * High-liquidity FX pairs * Intraday & swing trading --- 🎯 Who This Tool Is For Liquidation Bubbles is designed for: * Advanced discretionary traders * Order-flow & liquidity-based traders * Macro & index traders * Professionals seeking **context**, not signals If you want **where the market is fragile**, not just where price moved — this tool was built for you. --- 📌 Key Characteristics ✔ Non-repainting ✔ Statistically normalized ✔ Adaptive to volatility ✔ Works on all timeframes ✔ Futures & crypto ready ✔ No lagging indicators ✔ No moving average crosses --- Liquidation Bubbles does not predict the future. It shows you where the market is most likely to break. — OmegaTools
Pine Script® indicator
by OmegaTools
1
Zenith MACD Evolution [JOAT] Zenith MACD Evolution - Volatility-Normalized Momentum Oscillator Introduction and Purpose Zenith MACD Evolution is an open-source oscillator indicator that takes the classic MACD and normalizes it by ATR (Average True Range) to create consistent overbought/oversold levels across different market conditions. The core problem this indicator solves is that traditional MACD values are incomparable across different volatility regimes. A MACD reading of 50 might be extreme in a quiet market but normal in a volatile one. This indicator addresses that by dividing MACD by ATR and scaling to a consistent range, allowing traders to use fixed overbought/oversold levels that work across all market conditions. Why ATR Normalization Works Traditional MACD problems: - Values vary wildly based on price and volatility - No consistent overbought/oversold levels - Hard to compare across different instruments - Extreme readings in one period may be normal in another ATR-normalized MACD (Zenith) solves these: - Values scaled to consistent range - Fixed overbought/oversold levels work across all conditions - Comparable across different instruments - Extreme readings are truly extreme regardless of volatility How the Normalization Works // Classic MACD = ta.macd(close, fastLength, slowLength, signalLength) // ATR for normalization float atrValue = ta.atr(atrNormLength) // Volatility-Normalized MACD float zenithMACD = atrValue != 0 ? (histLine / atrValue) * 100 : 0 float zenithSignal = ta.ema(zenithMACD, signalLength) The result is a MACD that typically ranges from -200 to +200, with consistent levels: - Above +150 = Overbought - Below -150 = Oversold - Above +200 = Extreme overbought - Below -200 = Extreme oversold Signal Types Zero Cross Up/Down - Zenith crosses zero line (trend change) Overbought/Oversold Entry - Zenith enters extreme zones Overbought/Oversold Exit - Zenith leaves extreme zones (potential reversal) Momentum Shift - Histogram direction changes (early warning) Divergence - Price makes new high/low but Zenith does not Histogram Coloring The histogram uses four colors to show momentum state: - Strong Bull (Teal) - Positive and rising - Weak Bull (Light Teal) - Positive but falling - Strong Bear (Red) - Negative and falling - Weak Bear (Light Red) - Negative but rising This helps identify momentum shifts before crossovers occur. Dashboard Information Zenith - Current normalized MACD value with signal line Zone - Current zone (EXTREME OB/OVERBOUGHT/NORMAL/OVERSOLD/EXTREME OS) Momentum - Direction (RISING/FALLING/FLAT) Histogram - Current histogram value ATR Norm - Current ATR value used for normalization Classic - Traditional MACD value for reference How to Use This Indicator For Mean-Reversion: 1. Wait for Zenith to reach extreme zones (+200/-200) 2. Look for momentum shift (histogram color change) 3. Enter counter-trend when exiting extreme zone For Trend Following: 1. Enter long on zero cross up 2. Enter short on zero cross down 3. Use histogram color to gauge momentum strength For Divergence Trading: 1. Watch for DIV labels (price vs Zenith divergence) 2. Bullish divergence at support = potential long 3. Bearish divergence at resistance = potential short Input Parameters Fast/Slow/Signal Length (12/26/9) - Standard MACD parameters ATR Normalization Period (26) - Period for ATR calculation Overbought/Oversold Zone (150/-150) - Zone thresholds Extreme Level (200) - Extreme threshold Show Classic MACD Lines (false) - Toggle traditional lines Show Divergence Detection (true) - Toggle divergence signals Divergence Lookback (14) - Bars to scan for divergence Timeframe Recommendations All timeframes work due to normalization Higher timeframes provide smoother signals Normalization makes cross-timeframe comparison meaningful Limitations ATR normalization adds slight lag Divergence detection is simplified Extreme zones can persist in strong trends Works best when combined with price action analysis Open-Source and Disclaimer This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. This indicator does not constitute financial advice. Momentum analysis does not guarantee profitable trades. Always use proper risk management. - Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
Trade Confidence BoosterNOT FINANCIAL ADVICE. TRADE AT YOUR OWN RISK. The Smart Day Trader’s and Scalpers Secret Weapon Stop guessing. Start trading with confidence . The Trade Confidence Booster is a comprehensive trading system that transforms chaotic price action into crystal-clear entry and exit signals. Built for day traders and scalpers who demand a clean, rule-based indicator with structure, clarity, and consistency — without clutter. This indicator combines institutional-level analysis with simple, actionable signals. What Makes This Different? While others chase random breakouts and get stopped out repeatedly, Trade Confidence Booster waits for the market to show its hand through the coveted "Confidence Candle" pattern - a powerful consolidation signal that appears within clear trends and explosive moves. This isn't another repainted indicator making false promises. It's a complete trading framework that shows you: WHEN to enter (Confidence Candles + Entry Signals) Also, WHEN to trim and lock in gains (3 Customizable Trim Tiers) WHERE to exit (Dynamic and Customizable Trend Break Triggers) HOW MUCH confidence to put into the trade (Confluence Scoring System) Key Features 📊 Smart Trend Detection - Multi-layered trend analysis combining price structure, momentum, and volume that also has the ability to AVOID CHOP 💪 Confidence Candle Technology - Identifies low-risk, high-probability entry zones 🎯 7-Point Confluence System - Never guess if a setup is worth taking 📈 Clear Entry Signals - CALL/PUT labels complete with quality scores 💰 Automated Profit Management - Built-in trim levels with default settings at 0.35%, 0.80%, and 1.25% that are completely customizable 🛡️ Adaptive Trailing Stops - Protects profits while letting winners run with adjustable buffers that compliment your trading and risk style 📍 Multi-Timeframe Support Levels - Hourly S/R zones visible on any timeframe 📐 Dynamic Fibonacci Levels - Auto-adjusting to current trend 🔵 Opening Range Breakout (ORB) - Visually see three (3) days of Original Ranges based on your desired timeframe (default set at 15 minutes) and easily identify a breakout in either direction 📊 Volume Profile with POC - See where smart money is positioned This indicator isn’t built try and predict the market — it’s designed to help you stay aligned with structure, avoid chop, and manage trades with discipline.
Pine Script® indicator
by JaXolutions
11