Get started

Volume

Fed Balance Sheet vs GDP RatioThis indicator tracks the size of the Federal Reserve’s Balance Sheet relative to the total US Economy (Nominal GDP). It serves as a primary gauge for systemic liquidity and the extent of monetary intervention in the markets. How it Works: The script calculates the ratio between: Fed Total Assets (FRED:WALCL) - The total amount of bonds and assets held by the Fed. US Nominal GDP (FRED:GDP) - The annualized economic output of the US. How to Read the Levels: I have plotted historical reference lines to help contextualize the current cycle: 🔴 35% (Pandemic Peak): The absolute high of monetary stimulus (2020–2022). This represents maximum liquidity, where the Fed "printed" massive amounts of money to support the economy. 🟠 ~20% (The "Danger Zone"): This was the range established after the 2008 Financial Crisis (2014–2019). Watch this level closely. In late 2019, when the Fed tried to push the ratio below ~18%, the banking plumbing broke (the Repo Crisis), forcing them to restart QE. We are currently approaching this level again. ⚪ 6% (Pre-2008 Normal): The historical baseline before the era of Quantitative Easing (QE) began. Why This Matters: Rising Ratio: Suggests the Fed is expanding liquidity (QE) faster than the economy is growing. Historically, this is a tailwind for risk assets (Stocks, Crypto). Falling Ratio: Suggests the Fed is tightening (QT) or the economy is outgrowing the money supply. This represents a headwind for liquidity and risk assets. Methodology Note: Data Source: Federal Reserve Economic Data (FRED). Calculation: No manual annualization is applied to GDP, as FRED:GDP is already reported as a Seasonally Adjusted Annual Rate (SAAR).
Pine Script® indicator
by xyd945
NY Session Vol Entries (RB Trading)NY Session Vol Entries (RB Trading) NY Session Vol Entries is an intraday analysis script designed to evaluate price behavior during U.S. market hours on the one hour chart. It focuses on the interaction between relative volume expansion, adaptive volatility structure, and directional momentum alignment to help users interpret active market conditions. The script is intended specifically for liquid U.S. equities during the New York session and is not designed for use outside this context. Intended Usage and Scope • Timeframe: 1 hour only • Market hours: New York session • Asset class: U.S. equities with consistent volume • Style: Intraday structure and momentum evaluation • Alerts: Available for all signal types Core Framework The script evaluates market behavior through three interdependent components that must align before a setup is displayed: Relative volume behavior Volatility expansion and contraction Directional momentum context This structure helps filter low-participation periods and reduce noise. Relative Volume Analysis The script compares current volume to a rolling 14-period average to identify periods where participation meaningfully deviates from typical conditions. Elevated volume often occurs during session opens or active repricing phases. When volume remains muted, the script suppresses signals to avoid low-quality environments. Adaptive Volatility Structure Volatility bands are calculated using an 8-period true range measurement. These bands adjust dynamically based on recent volatility rather than remaining static. During elevated participation, the bands compress to reflect tighter price acceptance. As volatility expands, the bands trail price to help visualize directional structure. Directional Momentum Context Directional context is determined using a dual moving average relationship. • When short-term momentum is above longer-term momentum, the script allows only bullish evaluations • When short-term momentum is below longer-term momentum, the script allows only bearish evaluations This alignment reduces counter-directional signals and helps maintain structural consistency. The filter can be disabled if users wish to study range behavior. Signal Classification The script displays two types of informational labels: Volume-Aligned Signals These appear only when directional momentum and relative volume expansion align at candle close. Momentum Rotation Signals These indicate directional shifts regardless of volume and are intended to provide context rather than standalone triggers. All signals are confirmed only after the candle closes. No intrabar logic is used. Stop and Target Reference Plotting When conditions align, the script plots visual reference levels: • A stop reference positioned beyond the momentum structure • A projected target reference calculated using a fixed 2R multiple relative to the stop distance These levels are provided for consistency and planning. They are not forecasts or guarantees. Session and Timing Considerations The script is designed specifically for New York market hours. Liquidity and participation outside this window often distort volume and volatility behavior. Earnings sessions should be treated with caution, as event-driven price action can override normal structural behavior. Opening Range Consideration The first one hour candle of the New York session can display elevated volatility due to initial repricing. Allowing additional candles to form may provide clearer structural information before evaluating signals. Why One Hour and New York Session The one hour timeframe balances structure and responsiveness while reducing lower-timeframe noise. New York trading hours provide the most reliable volume profile for U.S. equities, making relative volume analysis more meaningful. Settings Overview • Volatility period: 8 • Volatility multiplier: 3.0 • Volume average period: 14 • Momentum averages: 8 and 21 • Trend filter: Enabled by default • Alerts available for all signal types Chart Usage Guidelines • Use the script on a clean chart • Avoid stacking additional momentum or volume indicators • Drawings should only be used when they help interpret structure Important Notes This script analyzes historical price and volume behavior. It does not predict future price movement or ensure outcomes. Users should test the tool, understand its logic, and apply independent risk management.
Pine Script® indicator
by RB_T
4HR JRSX Swing Bias (RB Trading)4HR JRSX Swing Bias (RB Trading) The 4HR JRSX Swing Bias is a higher timeframe swing analysis script designed to evaluate directional pressure, momentum decay, and price acceptance on the four hour chart. It is built specifically for GBPUSD and EURUSD and is not intended for use on other markets or timeframes. It highlights conditions where directional pressure weakens, rotates, and is then confirmed by price behavior. Intended Use and Scope • Timeframe: 4 hour only • Markets: GBPUSD and EURUSD • Style: Swing bias and rotation analysis • Signal frequency: Intentionally low, typically 10 to 15 setups per year per pair • Alerts: Available for confirmed setups • Not designed for Asia session conditions Core Framework The script operates through a sequential three-stage process. A setup can only appear when all stages align. Directional pressure evaluation Momentum exhaustion and rotation Candle-based price confirmation This structure prevents signals from appearing during noise or low-quality market conditions. Directional Pressure Evaluation The first stage measures directional pressure across multiple four hour candles using a smoothed strength calculation. This step evaluates whether bullish or bearish participation is dominant over time rather than reacting to isolated price spikes. When directional pressure is unclear or neutral, the script remains inactive. Momentum Exhaustion and Rotation Once directional pressure is established, the script monitors for loss of momentum. Exhaustion is identified when pressure fails to expand despite continued price movement. This decay often appears near the later stages of a directional move and signals increased probability of rotation rather than continuation. Price Acceptance and Confirmation The final stage requires price to confirm the rotation through candle behavior. No intrabar logic is used. • Buy confirmation requires either – a bullish candle close following downside pressure exhaustion – or a pinbar showing strong rejection of lower prices • Sell confirmation requires either – a bearish candle close following upside pressure exhaustion – or a pinbar showing strong rejection of higher prices A setup is only confirmed after the four hour candle has fully closed. Stop and Target Reference Plotting When a setup is confirmed, the script plots visual reference levels: • A stop reference beyond the exhaustion zone where the setup would be invalidated • A projected target reference calculated using a fixed 4R multiple relative to the stop distance These levels are provided for structural planning and consistency. They do not represent predictions or guarantees. Why the Four Hour Chart Is Required The pressure and exhaustion calculations are tuned to higher-timeframe behavior. On lower timeframes, momentum cycles occur too rapidly and lead to frequent false rotations. The four hour chart provides the balance required for meaningful pressure, decay, and acceptance to develop. Session Considerations The script is not intended for Asia session evaluation. Reduced liquidity during those hours can distort momentum behavior and reduce signal quality. Best evaluation occurs during or after London and New York participation. Chart Presentation Guidelines • Use the script on a clean chart • Avoid stacking other oscillators or momentum tools • If drawings are used, they should be limited to swing structure or key price levels All visual elements should support understanding of the script output. Important Notes This script analyzes historical price behavior to identify structural swing conditions. It does not predict future price movement or ensure outcomes. Users should test the tool, understand its confirmation rules, and apply independent risk management.
Pine Script® indicator
by RB_T
ChartSignals.AIChartSignals.AI is an overlay indicator designed to simplify chart reading by highlighting potential trade opportunities and providing optional visual context tools. WHAT YOU’LL SEE • Buy/Sell signals displayed directly on the chart • Optional trade level guides (Entry / Take Profit / Stop Loss) to help structure a plan • Optional trend and zone overlays to help interpret market conditions • Optional key levels and breakout markers for additional context • Dynamic candle coloring to help visualize momentum vs. quieter conditions HOW TO USE (SIMPLE) • Add ChartSignals.AI to your chart • Choose a Signal Mode (controls how frequently signals appear) • Enable/disable the optional overlays you want • Use signals as chart assistance and confirm with your own analysis and risk management ALERTS This script includes alert conditions for: • Buy, Sell, general signal notifications, and key level break events (when enabled). DISCLAIMER For educational and charting purposes only. Not financial advice. Trading involves risk and you are responsible for your own decisions.
Pine Script® indicator
by ChartSignalsAI
Momentum Pulse Pro [MTF]# Momentum Pulse Pro ## What It Does Detects when price momentum is stretched to extremes. The indicator analyzes momentum and highlights when the market is overextended — either too hot or too cold. - **Green background** = Low momentum, potential bounce ahead - **Red background** = High momentum, potential reversal ahead - **Stronger color** = Stronger signal ## The Panel Displays a Momentum Index from 0-100: - **Below 30** = Stretched to the downside - **30-70** = Neutral zone - **Above 70** = Stretched to the upside ## How to Use 1. Wait for the background to change color 2. Stronger color = higher probability setup 3. Use as a filter for your strategy — don't trade it alone ## Settings - **Colors** — Customize green/red - **Transparency** — Background visibility - **Confluence Intensity** — How fast color intensifies - **Panel Position** — Move the info panel ## Alerts - Momentum enters extreme zone - Momentum strengthens or weakens inside extreme zone ## Good to Know - Non-repainting - Works on any market - Best on 4H chart or lower
Pine Script® indicator
by sftrading
FTL Context Teaser - PublicFTL Context (Teaser) – Public FTL Context (Teaser) is a visual market context layer designed to highlight periods of increased market risk and structural tension. This script does NOT provide trading signals and is NOT intended for standalone trading decisions. It serves as a contextual overlay only, helping traders visually identify when market conditions shift away from equilibrium. The teaser version is intentionally limited and does not expose the underlying logic or decision framework. Full functionality, advanced filters, and integrated decision logic are available in the invite-only FTL Context Layer (PRO). 📩 Contact / PRO access: fairtradinglab@gmail.com Educational & informational use only.
Pine Script® indicator
by FairTradingLab
RSI+Breadth Multi-Factor# RSI+ Breadth Multi-Factor Indicator **Multi-factor scoring system for US market timing | 美股多因子择时评分系统** [! (img.shields.io)](www.tradingview.com) [! (img.shields.io)](www.tradingview.com) [! (img.shields.io)](LICENSE) --- ## Overview | 概述 A quantitative indicator that combines **RSI**, **market breadth** (% above 20/50-day MA), and **up/down volume ratio** to generate actionable buy/sell signals for SPY, QQQ, and IWM. 这是一个结合 **RSI**、**市场广度**（站上20/50日均线比例）和 **涨跌成交量比** 的量化指标，为 SPY、QQQ 和 IWM 生成可操作的买卖信号。 --- ## Features | 功能特点 | Feature | 功能 | |---------|------| | 🎯 Multi-factor scoring (-10 to +10) | 多因子评分系统 (-10 到 +10) | | 📊 RSI + Breadth + Volume integration | RSI + 广度 + 成交量三重验证 | | 🔀 Three markets: SPY, QQQ, IWM | 三大市场：SPY、QQQ、IWM | | 🔥 Cross-market resonance detection | 跨市场共振信号检测 | | 📈 Trend filter (MA-based) | 趋势过滤（均线判断） | | ⏰ Auto-adapts to intraday timeframes | 自动适配日内时间周期 | | 🎚️ Three modes: Aggressive/Standard/Conservative | 三种模式：激进/标准/保守 | --- ## Signal Reference | 信号说明 | Score | Emoji | Signal | 中文 | Action | |:-----:|:-----:|--------|:----:|--------| | ≥ 6 | 🚀 | **PANIC LOW** | 恐慌低点 | Strong buy 强烈买入 | | ≥ 4 | 📈 | **BUY ZONE** | 低吸区 | Accumulate 分批建仓 | | -3~3 | - | **HOLD** | 持有 | Hold position 持仓观望 | | ≤ -4↑ | ⭐ | **ELEVATED** | 高估 | Hold cautious 持有但谨慎 | | ≤ -4↓ | ⚡ | **CAUTION** | 观望 | Take profit 止盈 | | ≤ -6↓ | ⚠️ | **REDUCE** | 减仓 | Reduce position 减少仓位 | > **↑ = Uptrend** (price > MA) | **↓ = Downtrend** (price < MA) ### Resonance Signals | 共振信号 | Emoji | Signal | Description | |:-----:|--------|-------------| | 🔥 | Resonance Buy | Multiple markets in buy zone 多市场同时低吸 | | ❄️ | Resonance Risk | Multiple markets in risk zone 多市场同时高估 | --- ## Scoring Logic | 评分逻辑 ### Factors | 因子 | Factor | Weight | Buy Score | Sell Score | |--------|--------|-----------|------------| | **RSI** | 1x | RSI < 30 → +2, < 40 → +1 | RSI > 75 → -2, > 65 → -1 | | **FI (50D MA%)** | Bottom focus | < 25% → +3, < 35% → +2 | > 85% → -2, > 78% → -1 | | **TW (20D MA%)** | Top focus | < 30% → +1 | > 82% → -3, > 72% → -2 | | **Volume Ratio** | 1x | UVOL/DVOL < 0.5 → +2 | > 2.5 → -2 | ### Breadth Symbols | 广度数据 | Market | TW Symbol | FI Symbol | Volume | |--------|-----------|-----------|--------| | SPY (S&P 500) | INDEX:S5TW | INDEX:S5FI | USI:UVOL/DVOL | | QQQ (NASDAQ) | INDEX:NCTW | INDEX:NCFI | USI:UVOLQ/DVOLQ | | IWM (Russell 2000) | INDEX:R2TW | INDEX:R2FI | USI:UVOL/DVOL | --- ## Settings | 设置说明 ### Mode | 模式 - **Aggressive**: Lower thresholds, shorter cooldown (5 bars) - **Standard**: Balanced defaults (10 bar cooldown) - **Conservative**: Higher thresholds, longer cooldown (15 bars) ### Key Parameters | 关键参数 | Parameter | Default | Description | |-----------|---------|-------------| | RSI Length | 14 | RSI calculation period | | Trend MA Length | 10 | MA for trend filter | | Cooldown Bars | 10 | Min bars between same signals | | Resonance Window | 3 | Bars to check for multi-market agreement | | Min Markets | 2 | # of markets needed for resonance | --- ## Usage | 使用方法 ### Installation | 安装 1. Copy the indicator code 2. In TradingView: **Pine Editor** → **New** → Paste code → **Add to Chart** ### Recommended Setup | 推荐设置 - **Timeframe**: Daily (D) for best accuracy | 推荐日线图 - **Markets**: Apply on SPY, QQQ, or IWM | 应用于SPY/QQQ/IWM - **Mode**: Start with "Standard" | 建议从"标准"模式开始 ### Intraday Mode | 日内模式 The indicator automatically detects intraday timeframes and adjusts: - Uses only RSI + Volume factors (TW/FI are daily-only data) - Lowers signal thresholds accordingly 指标会自动检测日内周期并调整： - 仅使用 RSI + 成交量因子（TW/FI 仅有日线数据） - 相应降低信号触发阈值 --- ## Dashboard | 仪表盘 Displays real-time factor breakdown: ``` ┌────────┬───────┬────────┐ │ Factor │ Score │ Weight │ ├────────┼───────┼────────┤ │ RSI │ 1.0 │ 1x │ │ FI(50D)│ 2.0 │ Bottom │ │ TW(20D)│ -1.0 │ Top │ │ Vol │ 1.0 │ 1x │ │ Trend │ ↑ │ 10MA │ ├────────┼───────┼────────┤ │ Total │ 3.0 │ HOLD │ └────────┴───────┴────────┘ ``` --- ## Alerts | 警报 Available alerts for each market (SPY/QQQ/IWM): - Panic Low / Buy Zone (entry signals) - Reduce / Caution (exit signals) - Resonance Buy / Risk (cross-market confirmation) 每个市场（SPY/QQQ/IWM）可设置以下警报： - 恐慌低点 / 低吸区（入场信号） - 减仓 / 观望（出场信号） - 共振买入 / 风险（跨市场确认） --- ## Trend Filter | 趋势过滤 **Key feature**: Risk signals (CAUTION/REDUCE) only trigger when **price is below the trend MA**. When price is above MA (uptrend), the indicator shows **ELEVATED** ⭐ instead, preventing premature exits during strong rallies. **核心功能**：风险信号（观望/减仓）仅在 **价格跌破趋势均线** 时触发。 当价格在均线之上（上升趋势）时，指标显示 **高估** ⭐，避免在强势上涨中过早离场。 --- ## Disclaimer | 免责声明 This indicator is for **educational and informational purposes only**. It is not financial advice. Past performance does not guarantee future results. Always do your own research and consider your risk tolerance before trading. 本指标仅供 **教育和参考用途**，不构成投资建议。历史表现不代表未来收益。交易前请自行研究并考虑风险承受能力。 --- ## License | 许可 MIT License - Free to use and modify with attribution. MIT 许可证 - 可自由使用和修改，请注明出处。 --- ## Author | 作者 Built with ❤️ for the trading community. 为交易社区精心打造 ❤️
Pine Script® indicator
by aaajiao
Smart WhaleOverview The Smart Whale Breakout System is a pure momentum strategy designed for Swing Traders who want to capture high-probability breakouts while managing risk with a mechanical trailing stop. Unlike indicators that try to guess "bottoms," this system follows the "Smart Money" approach: buying strength when institutional volume enters, and riding the trend until the momentum breaks. How it Works 1. The Entry (The Hunter) The system identifies a valid BREAKOUT signal only when four specific conditions align: Trend Filter: Price must be above the 150 SMA. We only trade with the long-term trend. Momentum: RSI > 50. Ensuring bulls are in control. Volume Spike (Whale Activity): Current volume must be significantly higher than the average (Default: 1.5x). This filters out weak retail moves. Price Action: A bullish candle closing higher than it opened. 2. The Exit (The Manager) Once in a trade, the system activates a dynamic Trailing Stop line. You never have to guess when to sell. You can choose between two exit logic modes in the settings: ATR Trailing (Default): Adapts to volatility. The stop moves up based on a multiple of the Average True Range (ATR). Great for volatile stocks (e.g., TSLA, NVDA). Percent Trailing: A fixed percentage drop from the highest high. (e.g., "Sell if price drops 10% from peak"). 3. The Context (Optional Filter) Squeeze Filter: Includes a built-in Bollinger/Keltner squeeze detection. If enabled in settings, the system will only signal a buy if the price recently broke out of a consolidation (squeeze). Default is OFF to catch all momentum moves. Key Features NO Repainting: Signals are confirmed at candle close. Visual Risk Management: A Red Trailing Stop line clearly shows where your invalidation point is. Fully Customizable: Adjust the Volume multiplier, ATR sensitivity, or Percentage drop to fit your asset class (Crypto/Stocks/Forex). Clean Visuals: Only colors the Breakout and Sell candles to keep your chart clean. Settings Guide Trend SMA Length: Define the long-term trend baseline (Default: 150). Volume Spike (xAvg): How much volume is needed to trigger a buy? (1.5 = 150% of average). Exit Method: Choose between "ATR Trailing" or "Percent Trailing". ATR Multiplier: Tighter stop (2.0) vs Looser stop (3.0). Require Squeeze?: Check this to filter for breakouts that only happen after a consolidation period. Disclaimer This tool is for educational purposes only. Always use proper risk management.
Pine Script® indicator
by yoni_ag
Custom Monthly Volume Profile [Multi-Timeframe]This indicator renders a high-precision Monthly Volume Profile designed for intraday traders and practitioners of Auction Market Theory. Unlike standard volume profiles, this script utilizes Multi-Timeframe (MTF) data request capability to build the profile from lower timeframe data (e.g., 5-minute bars) while displaying it on your trading timeframe. This tool is optimized to keep your chart clean while providing critical developing levels (POC, VAH, VAL) and historical context from the previous month. Key Features: 1. Dynamic "Auto-Scaling" Width One of the biggest issues with monthly profiles is visual clutter. Early Month: The profile starts wide (default 10% width) so you can clearly see the developing structure when data is scarce. Late Month: As volume accumulates, the profile automatically shrinks (scales down to 2% width) to prevent the histogram from obscuring price action. Note: This can be toggled off for a static width. 2. Developing & Static Levels Current Month: Displays real-time Developing Point of Control (dPOC), Value Area High (dVAH), and Value Area Low (dVAL). Previous Month: Automatically locks in the levels from the previous month at the close, providing immediate support/resistance references for the new month. 3. Time-Filtered Alerts Avoid waking up to notifications during low-volume overnight sessions. This script includes a Session Filter (Default: 0830-1500). Alerts for crossing POC, VAH, or VAL will only trigger if the price cross occurs within the user-defined time window. 4. Calculation Precision Multi-Timeframe Data: The profile is built using lower timeframe data (Input: Calculation Precision) rather than just the current chart bars. This ensures the Volume Profile shape remains accurate even when viewing higher timeframes. Row Size: Fully adjustable "Tick/Row Size" to control the resolution of the volume buckets. Settings Overview: Calculation Precision: Determine the granularity of the data (e.g., "5" for 5-minute data). Row Size: Controls vertical resolution (Lower = higher detail). Value Area %: Standard 70% default, fully adjustable. Auto-Width: Set the Start % (Day 1) and End % (Day 31). Alerts: Toggle Current or Previous month alerts and define the active time session. Visual Customization: Customize colors for the Histogram (Value Area vs. Outer Area). Customize line width and colors for POC, VAH, and VAL. Supports Right or Left alignment. Disclaimer: This tool is for informational purposes only. Past performance and volume levels do not guarantee future price action.
Pine Script® indicator
by tantankatrading
Navigator Triple VolumeNavigator Triple Volume (VWAP + Fixed VP + Flexible VP) **Navigator Triple Volume** combines three of the most practical volume-based tools into one clean overlay: 1. **VWAP (anchored) with optional deviation bands** 2. **Fixed Volume Profile** (auto-building by anchor timeframe, with optional developing/current profile) 3. **Flexible Volume Profile** (manual start/end window for custom range analysis) The goal is simple: give you **institutional-grade context**—where price is “fair,” where volume is accepted, and where the real inventory is sitting—without stacking multiple indicators. 1) Anchored VWAP + Bands This script plots an **anchored VWAP** and optional **±1 and ±2 standard deviation bands** to help you gauge: * “Fair value” (VWAP) * Stretch/extension zones (deviation bands) * Mean reversion vs. trend strength around VWAP Anchor period options include **Daily, Week, Month, Quarter, Year**, and event-based anchors like **Earnings, Dividends, and Splits** (where supported). 2) Fixed Volume Profile The Fixed VP automatically builds a **completed profile each time the anchor timeframe rolls over** (ex: Daily). It can also display the **current/developing profile** for the active anchor period. Includes: * **PoC (Point of Control)** * **Value Area (VAH/VAL)** based on a configurable % (default 68%) * Adjustable **rows (resolution)**, **profile width**, and **bar thickness** 3) Flexible Volume Profile Flexible VP lets you define a **custom range** using a manual **Start Calculation** and **End Calculation** time selection. This is ideal for: * Single swing legs * News/event reactions * Range breaks * “From low to high” campaign profiling Includes: * PoC + Value Area levels * Adjustable profile resolution and styling How traders use it * Use **VWAP** as the “fair value” magnet and trend filter * Use **Fixed VP** to identify session/period acceptance and key reference levels * Use **Flexible VP** to profile *your chosen range* and locate the true battleground: PoC, VAH, and VAL When all three agree, it’s a high-confidence area for decision-making. When they disagree, it often signals transition or rotation. Notes * This indicator draws profiles using TradingView line objects and includes controls to manage performance and display preferences. * Built for chart clarity: one script, three volume lenses.
Pine Script® indicator
by starone777
Navigator Volume Profil FixedLong Term Investing Day Trading Navigator Volume Profile Fixed (Fixed + Current Session) **Navigator Volume Profile Fixed** plots a horizontal volume profile on your chart using a **fixed timeframe anchor** (ex: Daily) and optionally overlays a **live “current” profile** for the active session/period. It’s designed to help you quickly see where volume is building (acceptance) vs. thinning out (rejection), and to identify the key reference levels traders watch most: **PoC, VAH, and VAL**. ### What it plots **Fixed Volume Profile (anchored to a timeframe)** Builds a completed profile each time the selected anchor timeframe rolls over (ex: each new day on a Daily anchor). **Current Volume Profile (live)** Continuously updates the developing profile for the current anchor period (optional toggle). **Point of Control (PoC)** Highlights the single price level with the highest traded volume. **Value Area (VAH / VAL)** Plots the Value Area boundaries using a configurable percentage (default **68%**), and visually differentiates the value area from the rest of the profile. Key settings * **Enable Fixed VP**: turn the fixed/anchored profile on/off * **Timeframe Anchor**: choose the profile reset period (ex: 1D) * **Show Current Fixed VP**: show/hide the developing (current) profile * **Number of Rows**: controls profile resolution (price “bins”) * **Profile Width (%)** and **Bar Thickness**: visual scaling controls * **PoC + Value Area toggles**: show/hide PoC and VA boundaries * **Extend PoC Line**: optionally extend the PoC into the future How to use it (practical) * Treat **PoC** as the most accepted price for the anchored period. * Use **VAH/VAL** as reference boundaries for balance vs. imbalance. * Compare **Fixed** vs **Current** profiles to see whether volume is migrating higher/lower during the session and where price is building acceptance. **Note:** This script draws using TradingView line objects and is optimized to stay within platform limits while maintaining a clean profile display.
Pine Script® indicator
by starone777
FTL Context - Public TeaserFTL Context (Teaser) – Public FTL Context (Teaser) is a visual market context layer designed to highlight periods of increased market risk and structural tension. This script does NOT provide trading signals and is NOT intended for standalone trading decisions. It serves as a contextual overlay only, helping traders visually identify when market conditions shift away from equilibrium. The teaser version is intentionally limited and does not expose the underlying logic or decision framework. Full functionality, advanced filters, and integrated decision logic are available in the invite-only FTL Context Layer (PRO). Educational & informational use only.
Pine Script® indicator
by FairTradingLab
Golden Volume Lines📌 Golden Volume — Lines (Golden Team) Golden Volume — Lines is an advanced volume-based indicator that detects Ultra High Volume candles using a statistical percentile model, then automatically draws and tracks key price levels derived from those candles. The indicator highlights where real market interest and liquidity appear and shows how price reacts when those levels are broken. 🔍 How It Works Volume Measurement Choose between: Units (raw volume) Money (Volume × Average Price) Average price can be calculated using HL2 or OHLC4. Percentile-Based Classification Volume is classified into: Medium High Ultra High Volume Thresholds are calculated using a rolling percentile window. Ultra Volume candles are colored orange. Dynamic High & Low Levels For every Ultra Volume candle: A High and Low dotted line is drawn. Lines extend to the right until price breaks them. Smart Line Break Detection (Wick-Based) A line is considered broken when price wicks through it. When a break occurs: 🟧 Orange line → broken by an Ultra Volume candle ⚪ White line → broken by a normal candle The line stops exactly at the breaking candle. 🔔 Alerts Alert on Ultra High Volume candles Alert when a High or Low line is broken Separate alerts for: Break by Ultra Volume candle Break by Normal candle 🎯 Use Cases Breakout & continuation confirmation Liquidity sweep detection Volume-validated support & resistance Market reaction after extreme participation ⚙️ Key Inputs Volume display mode (Units / Money) Percentile thresholds Lookback window size Maximum number of active Ultra levels Optional dynamic alerts ⚠️ Disclaimer This indicator is a volume and market structure tool, not a standalone trading system. Always use proper risk management and additional confirmation.
Pine Script® indicator
by GoldenCryptoSignals
PEAD ScreenerPEAD Screener - Post-Earnings Announcement Drift Scanner ═══════════════════════════════════════════════════════════════ WHY EARNINGS ANNOUNCEMENTS CREATE OPPORTUNITY ═══════════════════════════════════════════════════════════════ The days immediately following an earnings announcement are among the noisiest periods for any stock. Within hours, the market must digest new information about a company's profits, revenue, and future outlook. Analysts scramble to update their models. Institutions rebalance positions. Retail traders react to headlines. This chaos creates a well-documented phenomenon called Post-Earnings Announcement Drift (PEAD): stocks that beat expectations tend to keep rising, while those that miss tend to keep falling - often for weeks after the initial announcement. Academic research has confirmed this pattern persists across decades and markets. But not every earnings surprise is equal. A company that beats estimates by 5 cents might move very differently than one that beats by 5 cents with unusually high volume, or one where both earnings AND revenue exceeded expectations. Raw numbers alone don't tell the full story. ═══════════════════════════════════════════════════════════════ HOW "STANDARDIZED UNEXPECTED" METRICS CUT THROUGH THE NOISE ═══════════════════════════════════════════════════════════════ This screener uses a statistical technique to measure how "surprising" a result truly is - not just whether it beat or missed, but how unusual that beat or miss was compared to the company's own history. The core idea: convert raw surprises into Z-scores. A Z-score answers the question: "How many standard deviations away from normal is this result?" - A Z-score of 0 means the result was exactly average - A Z-score of +2 means the result was unusually high (better than ~95% of historical results) - A Z-score of -2 means the result was unusually low By standardizing surprises this way, we can compare apples to apples. A small-cap biotech's $0.02 beat might actually be more significant than a mega-cap's $0.50 beat, once we account for each company's typical variability. This screener applies this standardization to three dimensions: earnings (SUE), revenue (SURGE), and volume (SUV). ═══════════════════════════════════════════════════════════════ THE 9 SCREENING CRITERIA ═══════════════════════════════════════════════════════════════ ───────────────────────────────────────── 1. SUE (Standardized Unexpected Earnings) ───────────────────────────────────────── WHAT IT IS: SUE measures how surprising an earnings result was, adjusted for the company's historical forecast accuracy. Calculation: Take the earnings surprise (actual EPS minus analyst estimate), then divide by the standard deviation of past forecast errors. This uses a rolling window of the last 8 quarters by default. Formula: SUE = (Actual EPS - Estimated EPS) / Standard Deviation of Past Errors HOW TO INTERPRET: - SUE > +2.0: Strongly positive surprise - earnings beat expectations by an unusually large margin. These stocks often continue drifting higher. - SUE between 0 and +2.0: Modest positive surprise - beat expectations, but within normal range. - SUE between -2.0 and 0: Modest negative surprise - missed expectations, but within normal range. - SUE < -2.0: Strongly negative surprise - significant miss. These stocks often continue drifting lower. For long positions, look for SUE values above +2.0, ideally combined with positive SURGE. ───────────────────────────────────────── 2. SURGE (Standardized Unexpected Revenue) ───────────────────────────────────────── WHAT IT IS: SURGE applies the same standardization technique to revenue surprises. While earnings can be manipulated through accounting choices, revenue is harder to fake - it represents actual sales. Calculation: Take the revenue surprise (actual revenue minus analyst estimate), then divide by the standard deviation of past revenue forecast errors. Formula: SURGE = (Actual Revenue - Estimated Revenue) / Standard Deviation of Past Errors HOW TO INTERPRET: - SURGE > +1.5: Strongly positive revenue surprise - the company sold significantly more than expected. - SURGE between 0 and +1.5: Modest positive surprise. - SURGE < 0: Revenue missed expectations. The most powerful signals occur when BOTH SUE and SURGE are positive and elevated (ideally SUE > 2.0 AND SURGE > 1.5). This indicates the company beat on both profitability AND top-line growth - a much stronger signal than either alone. When SUE and SURGE diverge significantly (e.g., high SUE but negative SURGE), treat with caution - the earnings beat may have come from cost-cutting rather than genuine growth. ───────────────────────────────────────── 3. SUV (Standardized Unexpected Volume) ───────────────────────────────────────── WHAT IT IS: SUV detects unusual trading volume after accounting for how volatile the stock is. More volatile stocks naturally have higher volume, so raw volume comparisons can be misleading. Calculation: This uses regression analysis to model the expected relationship between price volatility and volume. The "unexpected" volume is the residual - how much actual volume deviated from what the model predicted. This residual is then standardized into a Z-score. In plain terms: SUV asks "Given how much this stock typically moves, is today's volume unusually high or low?" HOW TO INTERPRET: - SUV > +2.0: Exceptionally high volume relative to the stock's volatility. This often signals institutional activity - big players moving in or out. - SUV between +1.0 and +2.0: Elevated volume - above normal interest. - SUV between -1.0 and +1.0: Normal volume range. - SUV < -1.0: Unusually quiet - less activity than expected. High SUV combined with positive price movement suggests accumulation (buying). High SUV combined with negative price movement suggests distribution (selling). ───────────────────────────────────────── 4. % From D0 Close ───────────────────────────────────────── WHAT IT IS: This measures how far the current price has moved from the closing price on its initial earnings reaction day (D0). The "reaction day" is the first trading day that fully reflects the earnings news - typically the day after an after-hours announcement, or the announcement day itself for pre-market releases. Calculation: ((Current Price - D0 Close) / D0 Close) × 100 HOW TO INTERPRET: - Positive values: Stock has gained ground since earnings. The higher the percentage, the stronger the post-earnings drift. - 0% to +5%: Modest positive drift - earnings were received well but momentum is limited. - +5% to +15%: Strong drift - buyers continue accumulating. - > +15%: Exceptional drift - significant institutional interest likely. - Negative values: Stock has given back gains or extended losses since earnings. May indicate the initial reaction was overdone, or that sentiment is deteriorating. This metric is most meaningful within the first 5-20 trading days after earnings. Extended drift (maintaining gains over 2+ weeks) is a stronger signal than a quick spike that fades. ───────────────────────────────────────── 5. # Pocket Pivots ───────────────────────────────────────── WHAT IT IS: Pocket Pivots are a volume-based pattern developed by Chris Kacher and Gil Morales. They identify days where institutional buyers are likely accumulating shares without causing obvious breakouts. Calculation: A Pocket Pivot occurs when: - The stock closes higher than it opened (up day) - The stock closes higher than the previous day's close - Today's volume exceeds the highest down-day volume of the prior 10 trading sessions The screener counts how many Pocket Pivots have occurred since the earnings announcement. HOW TO INTERPRET: - 0 Pocket Pivots: No detected institutional accumulation patterns since earnings. - 1-2 Pocket Pivots: Some institutional buying interest - worth monitoring. - 3+ Pocket Pivots: Strong accumulation signal - institutions appear to be building positions. Pocket Pivots are most significant when they occur: - Immediately following earnings announcements - Near moving average support (10-day, 21-day, or 50-day) - On above-average volume - After a period of price consolidation Multiple Pocket Pivots in a short period suggest sustained institutional demand, not just a one-day event. ───────────────────────────────────────── 6. ADX/DI (Trend Strength and Direction) ───────────────────────────────────────── WHAT IT IS: ADX (Average Directional Index) measures trend strength regardless of direction. DI (Directional Indicator) shows whether the trend is bullish or bearish. Calculation: ADX uses a 14-period lookback to measure how directional (trending) price movement is. Values range from 0 to 100. The +DI and -DI components compare upward and downward movement. The screener shows: - ADX value (trend strength) - Direction indicator: "+" for bullish (price trending up), "-" for bearish (price trending down) HOW TO INTERPRET: - ADX < 20: Weak trend - the stock is moving sideways, choppy. Not ideal for momentum trading. - ADX 20-25: Trend is emerging - potentially starting a directional move. - ADX 25-40: Strong trend - clear directional movement. Good for momentum plays. - ADX > 40: Very strong trend - powerful move in progress, but may be extended. The direction indicator (+/-) tells you which way: - "25+" means ADX of 25 with bullish direction (uptrend) - "25-" means ADX of 25 with bearish direction (downtrend) For post-earnings plays, ideal setups show ADX rising above 25 with positive direction, confirming the earnings reaction is developing into a sustained trend rather than a one-day spike. ───────────────────────────────────────── 7. Institutional Buying PASS ───────────────────────────────────────── WHAT IT IS: This proprietary composite indicator detects patterns consistent with institutional accumulation at three stages after earnings: EARLY (Days 0-4): Looks for "large block" buying on the earnings reaction day (exceptionally high volume with a close in the upper half of the day's range) combined with follow-through buying on the next day. MID (Days 5-9): Checks for sustained elevated volume (averaging 1.5x the 20-day average) combined with positive drift and consistent upward price movement (more up days than down days). LATE (Days 10+): Detects either visible accumulation (positive drift with high volume) OR stealth accumulation (positive drift with unusually LOW volume - suggesting smart money is quietly building positions without attracting attention). HOW TO INTERPRET: - Check mark/value of '1': Institutional buying pattern detected. The stock shows characteristics consistent with large players accumulating shares. - X mark/value of '0': No institutional buying pattern detected. This doesn't mean institutions aren't buying - just that the typical footprints aren't visible. A passing grade here adds conviction to other bullish signals. Institutions have research teams, information advantages, and long time horizons. When their footprints appear in the data, it often precedes sustained moves. Important: This is a pattern detection tool, not a guarantee. Always combine with other analysis. ───────────────────────────────────────── 8. Strong ATR Drift PASS ───────────────────────────────────────── WHAT IT IS: This measures whether the stock has drifted significantly relative to its own volatility. Instead of asking "did it move 10%?", it asks "did it move more than 1.5 ATRs?" ATR (Average True Range) measures a stock's typical daily movement. A volatile stock might move 5% daily, while a stable stock might move 0.5%. Using ATR normalizes for this difference. Calculation: ATR Drift = (Current Close - D0 Close) / D0 ATR in dollars The indicator passes when ATR Drift exceeds 1.5 AND at least 5 days have passed since earnings. HOW TO INTERPRET: - Check mark/value of '1': The stock has drifted more than 1.5 times its average daily range since earnings - a statistically significant move that suggests genuine momentum, not just noise. - X mark/value of '0': The drift (if any) is within normal volatility bounds - could just be random fluctuation. Why wait 5 days? The immediate post-earnings reaction (days 0-2) often includes gap fills and noise. By day 5, if the stock is still extended beyond 1.5 ATRs from the earnings close, it suggests real buying pressure, not just a reflexive gap. A passing grade here helps filter out stocks that "beat earnings" but haven't actually moved meaningfully. It focuses attention on stocks where the market is voting with real capital. ───────────────────────────────────────── 9. Days Since D0 ───────────────────────────────────────── WHAT IT IS: Simply counts the number of trading days since the earnings reaction day (D0). HOW TO INTERPRET: - Days 0-5 (Green): Fresh earnings - the information is new, institutional repositioning is active, and momentum trades are most potent. This is the "sweet spot" for PEAD strategies. - Days 6-10 (Neutral): Mid-period - some edge remains but diminishing. Good for adding to winning positions, less ideal for new entries. - Days 11+ (Red): Extended period - most of the post-earnings drift has typically played out. Higher risk that momentum fades or reverses. Research shows PEAD effects are strongest in the first 5-10 days after earnings, then decay. Beyond 20-30 days, the informational advantage of the earnings surprise is largely priced in. Use this to prioritize: focus on stocks with strong signals that are still in the early window, and be more selective about entries as days accumulate. ═══════════════════════════════════════════════════════════════ PUTTING IT ALL TOGETHER ═══════════════════════════════════════════════════════════════ You can use this screener in the chart view or in the Screener. One combination of the above filters to develop a shortlist of positive drift candidates may be: - SUE > 2.0 (significant earnings beat) - SURGE > 1.5 (significant revenue beat) - Positive % From D0 Close (price confirming the good news) - Institutional Buying PASS (big players accumulating) - Strong ATR Drift PASS (statistically significant movement) - Days Since D0 < 10 (still in the active drift window) No single indicator is sufficient. The power comes from convergence - when multiple independent measures all point the same direction. ═══════════════════════════════════════════════════════════════ SETTINGS ═══════════════════════════════════════════════════════════════ Key adjustable parameters: - SUE Method: "Analyst-based" uses consensus estimates; "Time-series" uses year-over-year comparison - Window Size: Number of quarters used for standardization (default: 8) - ATR Drift Threshold: Minimum ATR multiple for "strong" classification (default: 1.5) - Institutional Buying thresholds: Adjustable volume and CLV parameters ═══════════════════════════════════════════════════════════════ DISCLAIMER ═══════════════════════════════════════════════════════════════ This screener is a research tool, not financial advice. Past patterns do not guarantee future results. Always conduct your own due diligence and manage risk appropriately. Post-earnings trading involves significant uncertainty and volatility. The 'SUE' in this indicator does not represent a real person; any similarity to actual Sue's (or Susans for that matter) living or dead is quite frankly ridiculous, not to mention coincidental.
Pine Script® indicator
by mericourt
Relative Volume Bollinger Band % The Relative Volume Bollinger Band % indicator is a powerful tool designed for traders seeking insights into volume, Bollinger band and relative strength dynamics. This indicator assesses the deviation of a security's trading volume relative to the Bollinger band % indicator and the RSI moving average. Together, these shed light on potential zones of interests where market shifts have a high probability of occurring. Key Features: Period: Tailor the indicator's sensitivity by adjusting the period of the smooth moving average and/or the period of the Bollinger band. How it Works: Moving Average Calculation: The script computes the simple moving average (SMA) of the relative strength over a defined period. When the higher SMA (orange line) is in the top grey zone, the security is in a zone where it has a high probability of becoming bullish. When the higher SMA is in the lower grey zone, the security is in a zone where it has a high probability of becoming bearish. -Bollinger Band %: The script also computes the BB% which is primarily used to confirm overbought and oversold areas. When overbought, it turns white and remains white until the overbuying pressure is released indicating that the security is about to become bearish. The script indicates a bearish reversal when the BB% and RVOL bars are both red or when there are no more yellow RVOL bars, if present. When the BB% is<0 and rising, it will also appear white with yellow RVOL bars above. This is a good indication that bulls are beginning to enter buying positions. Confirmation here is indicated when the yellow RVOL bars change to green. Relative Volume: The indicator then also normalizes the difference volume to indicate areas of high and low volatility. This shows where higher than normal volumes are being traded and can be used as a good indication of when to enter or exit a trade when the above criterions are met. Visual Representation: The result is visually represented on the chart using columns. Bright green columns signify bullish relative volume values that are much greater than normal. Green columns signify bullish relative volume values that are significant. Red columns represent bearish values that are significant. Blue columns on the BB% indicator represent significant bullish buying in overbought areas. Red columns on the BB% indicator that are < 0 represent a bearish trend that is in an oversold area. This is there to prevent early entry into the market. Enhancements: Areas of Interest: Optionally, Areas of interest are represented by red, yellow and green circles on the higher SMA line, aiding in the identification of significant deviations.
Pine Script® indicator
by capableDealer16380
FestX VSTFestX NY Session Volume Framework is a session-based momentum and liquidity indicator designed specifically for the New York market open. The script focuses on time-based market behaviour, filtering signals to only occur at precise session transitions where institutional volume is statistically higher. Core Concepts Used: • Session Transition Logic Signals are only evaluated when the New York trading session opens, eliminating noise from low-liquidity periods. • Relative Volume Expansion Instead of raw volume, the script compares current volume against a rolling average to detect abnormal participation at the session open. • Directional Candle Validation Entry bias is derived from the relationship between candle open and close at the session trigger, aligning trades with immediate momentum. • Optional Session Range Context The tool can be used alongside Asian session highs and lows to identify continuation or reversal behaviour after range compression. What Makes This Script Different: This indicator does not attempt to predict direction throughout the day. It deliberately restricts signals to one specific institutional window, using volume expansion + price acceptance to confirm direction. This design reduces overtrading and focuses traders on high-quality, time-based opportunities rather than constant signals. Intended Use: • NY session open traders • Index and futures traders • Traders seeking confirmation at session transitions This script is not a traditional trend indicator or oscillator and is best used as a contextual decision tool, not a standalone signal generator.
Pine Script® indicator
by MrFestX
INSTITUTIONAL MOMENTUM [@Ash_TheTrader]⚡ The Impulse Engine: Institutional Velocity & Smart Structure System Subtitle/Short Description: Stop looking at just Open and Close. Visualize the speed of price action, detect institutional footprints, and trade off dynamic "living" market structure that flips and burns automatically. Developed by @Ash_TheTrader. The Hidden Dimension of Price Action Most traders look at a standard candlestick and see four data points: Open, High, Low, and Close. But this hides the most critical information: The struggle. Did the buyers step in aggressively in the first 5 minutes, pushing price to highs instantly? (Institutional buying) Or did it take 59 minutes of slow, grinding effort to reach that high? (Retail exhaustion/Trap) Standard candles look identical in both scenarios. The Impulse Engine, developed by @Ash_TheTrader, solves this by visualizing the "Speed of Price" (Velocity) directly onto your chart, combined with a state-of-the-art, dynamic market structure system. It’s not just an indicator; it’s a complete market X-ray. 1. The Velocity Painter: See the Speed ⚡ The core of this system is the Velocity Engine. It looks "inside" your current timeframe bar (using lower timeframe data) to calculate how fast price traveled to its extremes. It paints the bars based on institutional urgency, allowing you to ignore the noise and focus on the momentum. The Visual Code: ⚡ NEON CYAN (Bullish Impulse) : Aggressive buying. Price ripped from the open to the high very quickly. This is where the smart money is stepping on the gas. ⚡ NEON MAGENTA (Bearish Impulse): Aggressive selling. Price crashed from the open to the low immediately. 💤 FADED GREY (Exhaustion/Trap): The "grind." Price took a long time to reach its extremes. These are often low-momentum environments or potential traps waiting to reverse. STANDARD GREEN/RED: Normal market flow with no significant velocity extremes. "Trade the Neon, Ignore the Grey." — @Ash_TheTrader 2. Smart Structure: "Living" Levels 🏗️ Old-school pivot indicators clutter your chart with endless historical lines that are no longer relevant. The Impulse Engine uses a "Living Structure" algorithm that manages the lifecycle of every support and resistance level. It only shows you the two most relevant Resistance levels (R1, R2) above price, and the two most relevant Support levels (S1, S2) below price. Risk-Based Classification: You choose the structure based on your trading style in the settings: Scalp Mode: Detects short-term, 5-bar swings. (Thin dotted lines). Trend Mode: Detects standard trend swings (21-bar). (Dashed lines). Major Swing: Detects deep, major structural points (60-bar). (Thick solid lines). The "Flip & Burn" Mechanic (Viral Feature) 🔥 This is where the system gets smart. It understands market mechanics: The Flip (Role Reversal): If a Resistance level is broken by a candle close, it automatically turns Gold and becomes Support (Flip). The same applies to Support turning into Resistance. You no longer need to guess if an old level will hold from the other side. The Burn (Auto-Cleaning): If a "Flipped" level is broken again, the system recognizes it has lost its structural integrity. The line is instantly "burned" (removed from the chart). This ensures your chart only ever shows levels that are active and respected. 3. Whale Signs: The Footprint of Big Money 🐋 Sometimes, velocity isn't enough. You need to see raw power. The Whale Sign feature detects massive expansions in volatility. It flags any candle whose range is significantly larger (default 2x) than the average of the previous two candles. 💚 Green Triangle + $ (Below Bar): A massive bullish expansion candle. A "Wake Up" call for longs. ❤️ Red Triangle + $ (Above Bar): A massive bearish expansion candle. A warning sign for shorts. These often precede sustained velocity moves. 4. The Pro HUD (Heads-Up Display) 💻 In the bottom right corner, the dynamic HUD gives you a real-time health check of the current candle. Status Header: Instantly tells you if the current candle is IMPULSE, EXHAUSTION, or NORMAL. Live Velocity %: The exact speed score. The text color changes to Neon during impulses and fades to grey during exhaustion. Mode Info: Reminds you which risk setting you are currently using (e.g., Mode: ). Signature: The official @Ash_TheTrader stamp of quality. How to Trade With The Impulse Engine This system is designed for confluence. Never trade a signal in isolation. 📈 Strategy 1 : The "Velocity Bounce" (Trend Continuation) Ensure the market is trending (e.g., making higher highs). Wait for price to pull back to a Smart Support level (Cyan dashed line or Gold "Flip" line). Trigger: Look for a Neon Cyan Impulse Candle to form right off that support level. This confirms institutions are defending the structure with speed. 📉 Strategy 2: The "Whale Breakout" Identify a consolidation zone below a Smart Resistance level. Trigger: A Whale Sign ($) appears on a candle that successfully closes above the Resistance level. Confirmation: The very next candle should ideally be a Neon Impulse candle continuing the move. Conclusion The markets are moved by aggression and speed. By obscuring this data, standard charts put you at a disadvantage. The Impulse Engine brings this hidden data to the forefront, combining institutional velocity detection with smart, automated market structure that reacts to price just like a professional trader would. Trade faster, trade smarter. Developed by @Ash_TheTrader. (Disclaimer: This tool is for informational purposes only and does not constitute financial advice. Always manage your risk.)
Pine Script® indicator
by Ash_TheTrader
able FRVP Reversal# able FRVP Reversal - Complete User Guide ## 📌 Overview **able FRVP Reversal** is a professional-grade Volume Profile indicator with an integrated reversal detection system. It combines Fixed Range Volume Profile (FRVP) analysis with a confluence-based reversal scoring system to identify high-probability turning points at key volume levels. --- ## ✨ Key Features | Feature | Description | |---------|-------------| | **Session-Based Volume Profile** | Automatically resets at the beginning of each regular trading session | | **POC (Point of Control)** | Highest volume price level - strongest support/resistance | | **VAH (Value Area High)** | Upper boundary of the 70% value area - resistance zone | | **VAL (Value Area Low)** | Lower boundary of the 70% value area - support zone | | **Confluence Scoring System** | 5-point scoring system for reversal detection | | **Smart Cooldown** | Prevents signal spam with customizable cooldown period | | **Real-time Info Table** | Displays all key metrics in a retro-style dashboard | --- ## 🔧 Installation 1. Open TradingView and go to **Pine Editor** 2. Delete any existing code and paste the indicator code 3. Click **"Add to Chart"** 4. Configure settings as needed --- ## ⚙️ Settings Explained ### 📊 Volume Profile Settings | Setting | Default | Description | |---------|---------|-------------| | **Number of Rows** | 50 | Resolution of the volume profile (more rows = finer detail) | | **Value Area %** | 70 | Percentage of volume to include in Value Area (industry standard: 70%) | | **Profile Width** | 40 | Visual width of the histogram on chart | | **Show Histogram** | ✓ | Display volume histogram bars | | **Show POC/VAH/VAL** | ✓ | Display the three key levels | | **Show Labels** | ✓ | Display price labels for each level | | **Extend Lines** | ✓ | Extend levels to the right of current price | | **Extend Length** | 100 | How far to extend the lines (in bars) | ### 🔄 Reversal Detection Settings | Setting | Default | Description | |---------|---------|-------------| | **Enable Reversal Detection** | ✓ | Turn reversal signals on/off | | **Min Confluence Score** | 3 | Minimum score required to trigger signal (1-5) | | **Cooldown Bars** | 10 | Minimum bars between signals to prevent spam | #### Understanding Min Confluence Score: - **Score 1-2**: Very sensitive, many signals (not recommended) - **Score 3**: Balanced - good for most traders ⭐ Recommended - **Score 4**: Conservative - fewer but higher quality signals - **Score 5**: Very strict - only strongest reversals ### 🎨 Color Settings All colors are fully customizable: - **POC Line**: Default Gold (#FFD700) - **VAH Line**: Default Coral Red (#FF6B6B) - **VAL Line**: Default Teal (#4ECDC4) - **Bullish Reversal**: Default Green (#00E676) - **Bearish Reversal**: Default Red (#FF5252) --- ## 📖 How to Read the Indicator ### Volume Profile Histogram ``` █████████████ ← High volume = Strong S/R ████████ ← Medium volume ████ ← Low volume = Weak S/R ██ ``` - **Darker/Longer bars** = More trading activity at that price - **Inside Value Area** = Colored based on session direction (Bull/Bear) - **Outside Value Area** = Muted gray color ### Key Levels | Level | Color | Meaning | |-------|-------|---------| | **POC** | Yellow | Price with highest volume - Strongest magnet | | **VAH** | Red | Upper resistance - Look for bearish reversals | | **VAL** | Teal | Lower support - Look for bullish reversals | --- ## 🔄 Reversal Detection System ### How the Scoring System Works The indicator uses a **5-point confluence scoring system**. Each condition adds 1 point: #### 🟢 Bullish Reversal Score (at VAL) | Condition | Points | Description | |-----------|--------|-------------| | Price at VAL Zone | +1 | Price is within VAL ± 0.2 ATR | | Bullish Candle | +1 | Close > Open (green candle) | | RSI Oversold | +1 | RSI < 35 | | Rejection Wick | +1 | Lower wick > 1.5× body size | | Failed Breakdown | +1 | Touched below VAL but closed above | #### 🔴 Bearish Reversal Score (at VAH) | Condition | Points | Description | |-----------|--------|-------------| | Price at VAH Zone | +1 | Price is within VAH ± 0.2 ATR | | Bearish Candle | +1 | Close < Open (red candle) | | RSI Overbought | +1 | RSI > 65 | | Rejection Wick | +1 | Upper wick > 1.5× body size | | Failed Breakout | +1 | Touched above VAH but closed below | ### Signal Quality Ratings | Score | Rating | Meaning | |-------|--------|---------| | 5/5 | ★★★ | Excellent - Highest probability | | 4/5 | ★★ | Good - High probability | | 3/5 | ★ | Acceptable - Moderate probability | | <3 | - | No signal triggered | --- ## 📋 Info Table Explained ``` ╔═ able-REV ═╗ 15 ████████ SCR ───────────────────────────────────── ZONE UPPER VA ▒▒▓▓████ ▲ POC 4272.680 ██████·· ▲ VAH 4322.745 ████···· · VAL 4264.977 ██████·· · ═ SCORE ═════════════════════════════ BULL 0/5 ········ · BEAR 1/5 ░······· · RSI 49 ▒▒▓▓···· · ◄SIGNAL► WAIT ········ · ``` | Row | Description | |-----|-------------| | **ZONE** | Current price position relative to Value Area | | **POC/VAH/VAL** | Price levels with distance indicators | | **BULL Score** | Current bullish confluence score | | **BEAR Score** | Current bearish confluence score | | **RSI** | RSI value with OB/OS status | | **SIGNAL** | Current signal status (BUY/SELL/WAIT) | ### Zone Types | Zone | Meaning | Bias | |------|---------|------| | ABOVE VAH | Price broke above resistance | Bullish (but watch for rejection) | | ⚠ AT VAH | Price testing resistance | Watch for bearish reversal | | UPPER VA | Price in upper value area | Slight bullish bias | | LOWER VA | Price in lower value area | Slight bearish bias | | ⚠ AT VAL | Price testing support | Watch for bullish reversal | | BELOW VAL | Price broke below support | Bearish (but watch for rejection) | --- ## 📈 Trading Strategies ### Strategy 1: VAH Rejection (Bearish Reversal) **Setup:** 1. Price approaches or touches VAH (red dashed line) 2. BEAR score reaches 3+ (or your minimum setting) 3. REV signal appears above the candle **Entry:** - Enter SHORT on signal candle close - Or wait for confirmation candle **Stop Loss:** - Above the signal candle high - Or above VAH + 0.5 ATR **Take Profit:** - First target: POC (yellow line) - Second target: VAL (teal line) --- ### Strategy 2: VAL Bounce (Bullish Reversal) **Setup:** 1. Price approaches or touches VAL (teal dashed line) 2. BULL score reaches 3+ (or your minimum setting) 3. REV signal appears below the candle **Entry:** - Enter LONG on signal candle close - Or wait for confirmation candle **Stop Loss:** - Below the signal candle low - Or below VAL - 0.5 ATR **Take Profit:** - First target: POC (yellow line) - Second target: VAH (red line) --- ### Strategy 3: POC Bounce **Setup:** 1. Price pulls back to POC after trending 2. POC acts as support/resistance 3. Watch for reversal candle patterns **Entry:** - Long if bullish candle at POC from below - Short if bearish candle at POC from above **Stop Loss:** - Other side of POC ± buffer --- ## ⚠️ Important Notes ### When Signals Work Best ✅ **High Probability Setups:** - Score 4-5 with clear rejection wick - RSI confirms (oversold for long, overbought for short) - First test of VAH/VAL in the session - Clear trend before reversal ❌ **Low Probability Setups:** - Score barely meeting minimum (3/5) - Multiple tests of same level (level weakening) - Low volume/choppy market - News events pending ### Risk Management Rules 1. **Never risk more than 1-2% per trade** 2. **Always use stop loss** - place beyond the level 3. **Wait for candle close** - don't enter on wick touches 4. **Respect the cooldown** - avoid overtrading 5. **Consider the trend** - counter-trend reversals are riskier --- ## 🔔 Alerts The indicator includes built-in alerts: | Alert | Trigger | |-------|---------| | VAL Bullish Reversal | BULL score meets minimum at VAL | | VAH Bearish Reversal | BEAR score meets minimum at VAH | ### Setting Up Alerts: 1. Right-click on the chart 2. Select "Add Alert" 3. Choose "able FRVP Reversal" as condition 4. Select desired alert type 5. Configure notification method --- ## 💡 Pro Tips 1. **Combine with trend analysis** - Reversals in trend direction are more reliable 2. **Watch for confluence with other S/R** - If VAH/VAL aligns with round numbers, previous highs/lows, or fib levels, the level is stronger 3. **Volume confirmation** - Higher volume on reversal candle = stronger signal 4. **Time of day matters** - Reversals during active trading hours are more reliable 5. **Adjust sensitivity by market** - Volatile assets may need higher Min Confluence Score 6. **Use multiple timeframes** - Check if reversal level aligns with higher timeframe levels --- ## 🔧 Recommended Settings by Trading Style | Style | Min Confluence | Cooldown | Best For | |-------|----------------|----------|----------| | Scalping | 3 | 5-7 | Quick trades, more signals | | Day Trading | 3-4 | 10-15 | Balanced approach | | Swing Trading | 4-5 | 20+ | Fewer, higher quality signals | --- ## ❓ Troubleshooting | Issue | Solution | |-------|----------| | No signals appearing | Lower Min Confluence Score or check if market is ranging | | Too many signals | Increase Min Confluence Score or Cooldown Bars | | Levels not showing | Enable Show POC/VAH/VAL in settings | | Histogram too wide/narrow | Adjust Profile Width setting | --- ## 📞 Support For questions, suggestions, or bug reports, please contact the developer. --- **Version:** 1.0 **Last Updated:** 2024 **Platform:** TradingView (Pine Script v6)
Pine Script® indicator
by Able-terminal
Gamma & Volatility Levels [Pro]General Purpose This indicator analyzes volatility levels and expected price movements, combining gamma concepts (financial options) with volatility analysis to identify support and resistance zones. Main Components High Volatility Level (HVL): Calculates a volatility level based on the simple moving average (SMA) of the price plus one standard deviation. This level is represented by an orange line showing where volatility is concentrated. Expected Movement (Movimiento Esperante): Uses the Average True Range (ATR) multiplied by an adjustable factor to project potential upward and downward movement ranges from the current price. It is drawn in green (upward) and red (downward). Gamma Levels (Nivelas Gamma): Identifies two key levels: the call resistance (highest high of the last 50 periods) in blue, and the put support (lowest low) in purple. These are based on recent extreme prices. Additional Information: The indicator calculates the percentage distance between the current price and the HVL, displaying it in a label. Visual Elements Colored lines on the chart for each level. Labels with exact values ​​next to each line. A table in the upper right corner summarizing all calculated values. Options to show or hide each element according to preference. This is a useful tool for traders who work with options or seek to identify levels of extreme volatility and dynamic support/resistance zones.
Pine Script® indicator
by Carlos_pascual
1
VLinerMarket R1"VLiner Market R1" is our debut volume analysis tool designed to provide traders with comprehensive market insights through basic volume analysis - Delta volume. Inspired by the principles of an Order-Flow Trader. Further details: Market R1 features a unique design approach that combines two powerful analytical components, Volume Oscillator and Delta Bubbles (tick-volume). The VO tracks 15-minute candle momentum using white/orange color coding. Whilst the Delta Bubbles track 30-minute candle buy/sell pressure. Documents: The full User's manual for the use and concepts of this indicator is available on MT Blue's website : mtblue-nsg.com R1 uses: - Tick movement volume (not real data volume) - A look-back system for *semi-stochastic oscillation (delta toning: white & orange part of the VO's line) Slight concerns: - Although it may seem to be an indicator trading tool; it is Not . This indicator only provides visualization for educational purposes, and is strictly advised Not to be use for trading/investing executions.
Pine Script® indicator
by eugenephaolaor97
IVX: Institutional Velocity X-Ray [Ash_TheTrader]The Intrabar Liquidity X-Ray: Seeing Institutional Speed Inside the Candle ⚡🐢 Stop getting trapped by standard candlesticks. It’s time to see how fast the money is actually moving. A standard candlestick tells you four things: Open, High, Low, and Close. It’s the foundation of technical analysis. But it hides the most important metric of all: Speed. Two bullish 1-Hour candles can look identical on your chart. Both opened at $100 and closed at $105. Candle A hit $105 in the first 5 minutes, then spent 55 minutes holding that level. Candle B ground slowly upwards, finally hitting $105 in the 59th minute. To a standard indicator, these candles are the same. To a professional trader, they are opposites. One shows aggressive, front-loaded institutional buying; the other shows weak, exhausted retail grinding. As @Ash_TheTrader, I developed the Intrabar Liquidity X-Ray to solve this problem. It stops looking at the surface of the candle and looks inside it. 🧠 The Concept: Time-To-Form This indicator uses advanced Pine Script technology to conduct an "X-Ray" scan of the bar you are looking at. If you are on a 1-Hour chart, the script uses request.security_lower_tf to fetch the data of the 60 individual 1-minute bars hidden inside that single hour bar. It then asks a critical question: How long did it take for this candle to achieve its ultimate High or Low? In a Bullish candle, we measure the time it took to hit the specific minute of the bar's High. In a Bearish candle, we measure the time it took to hit the specific minute of the bar's Low. By measuring this "Time-To-Form," we can classify the intent behind the move. ⚡ The "Fast" Candle (Institutional Aggression) When smart money wants to move an asset, they don't wait all day. They execute large block orders that move price rapidly to their desired level, and then they defend it. The Signal: The indicator identifies a bar as "Fast" if it hits its High (for bulls) or Low (for bears) in the first 20% of the candle's duration. The Visual: The bar turns Neon Cyan and is marked with a lightning bolt ⚡. Interpretation by @Ash_TheTrader: This is urgent liquidity. Institutions are front-loading their orders. These levels are often strong zones of support or resistance on retests because the big players showed their hand early. 🐢 The "Slow" Candle (Retail Grind) Conversely, when a move is driven by retail traders chasing price, or when a trend is exhausted, price struggles to make new extremes. It grinds slowly, taking the entire duration of the candle just to inch slightly higher or lower. The Signal: The indicator identifies a bar as "Slow" if it takes more than 80% of the candle's duration to finally reach its High or Low. The Visual: The bar turns Orange and is marked with a turtle 🐢 beneath it. Interpretation by @Ash_TheTrader: This is "weak" movement. Even if the candle is green, if it took 58 minutes of a 60-minute bar just to make a new high, the buyers are exhausted. Be wary of reversals after seeing a cluster of 🐢 candles. 💻 Features and The Dashboard To make this data actionable in real-time, I have engineered a clean Heads-Up Display (HUD) directly on the chart. The On-Chart Dashboard: Located in the top right, the dashboard gives you the live stats of the current forming bar. It tells you exactly what percentage of the time has passed and whether the current structure is considered Institutional ⚡ or a Retail Grind 🐢. Other Features: Dual Polarity Logic: Works seamlessly for both bullish trends (tracking speed to Highs) and bearish trends (tracking speed to Lows). Smart Volume Filtering: The indicator automatically ignores insignificant low-volume "noise" bars, only highlighting speed on candles with above-average volume. Full Alert Capability: Set alerts for "Fast ⚡" detections to catch sudden institutional activity as it happens. ⚙️ Best Practices for Using This Tool Because this tool looks inside a bar, it is designed to be used on Higher Timeframes. Recommended Timeframes: 30-Minute, 1-Hour, 4-Hour, or Daily charts. Do Not Use On: 1-Minute or 5-Minute charts. (You cannot effectively "X-Ray" a 1-minute bar using 1-minute data; the math doesn't work). A Final Note from @Ash_TheTrader Trading is about information asymmetry. The market hides the most valuable data beneath the surface of the Open and Close. Use the Intrabar Liquidity X-Ray to stop guessing the speed of the market and start seeing it. Trade safe, trade smart.⚡
Pine Script® indicator
by Ash_TheTrader