Get started
TMAC on E-mini Nasdaq-100 Index FuturesTMAC on E-mini Nasdaq-100 Index FuturesTMAC on E-mini Nasdaq-100 Index Futures

TMAC on E-mini Nasdaq-100 Index Futures

No trades
See on Supercharts
Overview News
Ideas
Discussions Seasonals

NQX1! trade ideas

NQ Power Range Report with FIB Ext - 8/22/2025 SessionCME_MINI:NQU2025 - PR High: 23250.25 - PR Low: 23223.25 - NZ Spread: 60.5 Key scheduled economic events: 10:00 | Fed Chair Powell Speaks Session Open Stats (As of 12:35 AM 8/22) - Session Open ATR: 283.49 - Volume: 20K - Open Int: 280K - Trend Grade: Long - From BA ATH: -3.6% (Rounded) Key Levels (Rounded - Think of these as ranges) - Long: 24382 - Mid: 23239 - Short: 22096 Keep in mind this is not speculation or a prediction. Only a report of the Power Range with Fib extensions for target hunting. Do your DD! You determine your risk tolerance. You are fully capable of making your own decisions. BA: Back Adjusted BuZ/BeZ: Bull Zone / Bear Zone NZ: Neutral Zone
CME_MINI:NQU2025Short
by mv3trader5
DG rundown of a trade setup and bottoming processAs always the focus shall be on two timeframes : In the chart above (NQ September contract), the daily TF is on the left and 60M TF on the right. We have inserted manually key weekly and monthly levels (HTF terminations) in order to monitor/confirm a potential bottoming process. This is done automatically with the All-in-one indicator. The bottoming process is defined as a first close above the upcoming or “live” EBOT. Remember also that a Zone/Area holds when the close is in the Zone/Area. And only then Area 1 needs to become strong support, then Area 2 needs to follow by becoming support. You can see on the hourly chart how the first candle demonstrated a strong down flow (long range; huge distance between open and close; close almost at extreme). As we are not at a key HTF area but in between, we do nothing and wait for the close. The hourly will need 2-3 hourly candles closes before confirming a bottoming process (2-3 rule on all timeframes). Price is also far away from the PLdot so we also need to wait for the PLdot to "catch up" with price. Second hourly candle is also down with good flow, albeit smaller range so potentially first indication of minor change of flow, reaching key terminations (weekly and monthly) and closing below the upcoming EBOT so no bottoming yet. However, the PLdot is “swinging” downwards which could be interpreted as a first sign of an exhaust. Both of candle 1 and 2 are c-waves down. Next candle is finding support @ key HTF areas and closes above the upcoming EBOT and stops the c-waves down. This candle also allowed the PLdot to catch up with the price. This candle goes for the PLdot refresh, first to the live EBOT, then static EBOT then the live PLdot and finally static PLdot which confirms the refresh of new energy that pushes the price to close lower than the static PLdot almost at the place of the live PLdot. Remember how the closes are always important and how the live energy is always most relevant at the end of the time frame – for the hourly candle that would be in the last 30-15 minutes before the candle closes. So, a first safe entry would be LONG at the close of this candle. The conservative stop loss could be the static EBOT while another option would be the live EBOT. A more aggressive entry would be to go down to the 5 minutes timeframe and monitor around the HTF terminations the flow there and notice the spot where the c-waves stop (yellow box). Stop loss would be the blue line in this case. The fourth candle is a congestion entrance candle that provide a target of two PLdots back around 23362 which aligns with the daily static EBOT. This would be the target for the trade. The fourth candle closes below the ETOP so no c-waves yet, and the candle afterwards manages to close above the PLdot, still confirming the trend and finally the fifth candle starts a c-wave, hits the planned target Duration in trade - 4h (four candles after entry). What is next: We are in a daily PLdot refresh coming from the static EBOT. Either the refresh fails to break static EBOT and the daily down c-wave continues. The 60 minutes needs to start up c-waves in this area in order to confirm up-flow, otherwise the daily needs to have the 2-3 candles (2-3 days) to confirm bottoming. Daily is still in a c-wave down. As you can see, the daily needs to go through exactly what the hourly did in this example in order to start its bottoming process. You can use this on any timeframe, monitor and learn.
CME_MINI:NQU2025Long
by JordanMT
NQ Power Range Report with FIB Ext - 8/21/2025 SessionCME_MINI:NQU2025 - PR High: 23342.50 - PR Low: 23313.25 - NZ Spread: 65.25 Key scheduled economic events: 08:30 | Initial Jobless Claims - Philadelphia Fed Manufacturing PMI 09:45 | S&P Global Manufacturing PMI - S&P Global Services PMI 10:00 | Existing Home Sales Session Open Stats (As of 12:25 AM 8/21) - Session Open ATR: 289.20 - Volume: 29K - Open Int: 280K - Trend Grade: Long - From BA ATH: -2.9% (Rounded) Key Levels (Rounded - Think of these as ranges) - Long: 24382 - Mid: 23239 - Short: 22096 Keep in mind this is not speculation or a prediction. Only a report of the Power Range with Fib extensions for target hunting. Do your DD! You determine your risk tolerance. You are fully capable of making your own decisions. BA: Back Adjusted BuZ/BeZ: Bull Zone / Bear Zone NZ: Neutral Zone
CME_MINI:NQU2025Long
by mv3trader5
Nq Long OpportunitiesPrice found support at a cluster slightly lower than the one I highlighted this morning. It then broke through the blue zone (BISI) and moved down to the daily low. Once that level was taken out, notice the strong reaction: price quickly reversed to the upside, providing an excellent long opportunity for a profitable trade. ⚠️ Disclaimer: This analysis reflects personal market observations and is for educational purposes only. It does not constitute financial advice.
CME_MINI:NQ1!Long
by FTAKAS
DG Rundown on NQ Trade – Key Points to RememberTip 1: Focus on Two Timeframes Prefer swing trading. Zoom out. Use weekly as your focal timeframe and daily to understand what the weekly is doing in terms of strength, support, and resistance. In the chart above (NQ September contract), the weekly is on the left and daily on the right . We start with last week’s analysis by answering: 1. Where is price? The weekly candle closed in Area 5 , below the upcoming EBOT . Closes are key in DG. 2. What is it doing? (Is there a weekly/monthly top/bottom? How many days are left? What’s the envelope direction? Is PLdot swinging? Is flow shifting? Is it entering congestion, continuing a trend, or exhausting?) Price had been in a c-wave for the last two weeks, closing above ETOP. First August candle showed strong upward flow : wide range, close at the extreme, PLdot slope increasing, and opposite to July’s down candle. That August candle negated July’s down flow and was confirmed by the second August candle. This flow also reshaped the channel structure . Tip 2: Structure Holds When No Lower TF C-Waves Start When a candle closes in Area 5, exhaust zone, or higher, the next candle often treats that zone as support instead of resistance. That’s what happened with the s econd August candle – it found support and pushed higher. However, that same candle closed below the upcoming ETOP , which is a key warning. Tip 3: A Zone Holds When the Close Is in the Zone Price attempted to push above Zone 5 but was rejected, closing back in Area 5. That meant Area 5 was holding and flipping downwards . Flow also shifted: smaller range, closer open/close, no close at extremes. In DG, a topping pattern unfolds in 3 steps (3 candles on weekly): Touch exhaust upper limit + close in exhaust Bounce from ETOP but no exhaust close Reject from Area 5 + close below upcoming ETOP By this definition, NQ’s weekly chart may be in a topping process, with ETOP now likely acting as strong resistance. 3.What’s Next? We could expect a rollover to the downside at least for a PLdot refresh . Daily Price Action Friday’s candle = Congestion entrance with a projected target ~23,722 (2–3 Pldots back). Monday’s candle hit that target but failed at the daily PLdot. Tuesday’s candle touched the daily static PLdot again and confirmed the downward flow → a daily c-wave down. Daily action confirms that for the weekly to top, the daily must print c-waves down – and that’s what we’re seeing. Tip 5: 60-Minute C-Waves Are Key for Flow Flow shifts usually start on lower TFs, but 60m is the most reliable. On the hourly, the down flow slowed at the weekly static PLdot. Confirmation came when 60m candles failed to close above ETOP – meaning the flow was still down. The 2–3 candle rule for topping/bottoming applies to all timeframes. Tip 6: LTF C-Waves Can Break HTF Terminations When a higher timeframe level (PLdot, ETOP, EBOT) breaks, velocity increases and candle ranges expand. Here, 60m c-waves broke the weekly PLdot, driving price lower into the weekly EBOT area. What’s Next? (Scenarios) Bottoming begins only when: Area 1 (Exhaust) becomes strong support, Then Area 2 becomes strong support. This usually triggers only a PLdot refresh , which may occur at EBOT, live PLdot, or static PLdot. If the refresh fails to break static EBOT, the down c-wave continues. If daily channel bottom acts as resistance, 60m must first exhaust and re-enter its channel before a retrace or further breakdown. What happens after the PLdot refresh is decisive for the next move (“definition of done”). Entry idea: When 60m looks like it’s bottoming at a key daily area → drop to 15m/5m for entries. Time Element – Crucial for Execution Big moves tend to align with time-of-bar closes: 1H → last 30–15 minutes 15m → last 2 minutes 5m → last 1 minute Daily → last few hours Weekly → Friday afternoon Avoid arbitrary entries. Be systematic: flow + time + structure = higher probability trades.
CME_MINI:NQU2025Short
by JordanMT
NQ Power Range Report with FIB Ext - 8/20/2025 SessionCME_MINI:NQU2025 - PR High: 23485.50 - PR Low: 23450.00 - NZ Spread: 79.5 Key scheduled economic events: 10:30 | Crude Oil Inventories 14:00 | FOMC Meeting Minutes Session Open Stats (As of 12:35 AM 8/20) - Session Open ATR: 282.07 - Volume: 38K - Open Int: 287K - Trend Grade: Long - From BA ATH: -2.9% (Rounded) Key Levels (Rounded - Think of these as ranges) - Long: 24382 - Mid: 23239 - Short: 22096 Keep in mind this is not speculation or a prediction. Only a report of the Power Range with Fib extensions for target hunting. Do your DD! You determine your risk tolerance. You are fully capable of making your own decisions. BA: Back Adjusted BuZ/BeZ: Bull Zone / Bear Zone NZ: Neutral Zone
CME_MINI:NQU2025Short
by mv3trader5
NQ Power Range Report with FIB Ext - 8/19/2025 SessionCME_MINI:NQU2025 - PR High: 23838.00 - PR Low: 23792.25 - NZ Spread: 102.25 No key scheduled economic events Session Open Stats (As of 12:45 AM 8/19) - Session Open ATR: 269.98 - Volume: 22K - Open Int: 293K - Trend Grade: Long - From BA ATH: -1.3% (Rounded) Key Levels (Rounded - Think of these as ranges) - Long: 24382 - Mid: 23239 - Short: 22096 Keep in mind this is not speculation or a prediction. Only a report of the Power Range with Fib extensions for target hunting. Do your DD! You determine your risk tolerance. You are fully capable of making your own decisions. BA: Back Adjusted BuZ/BeZ: Bull Zone / Bear Zone NZ: Neutral Zone
CME_MINI:NQU2025Short
by mv3trader5
NQ Futures Daily Plan – August 19, 2025NQ Futures Daily Plan – August 19, 2025 NQ remains in a 3-day balance structure ahead of tomorrow’s housing data (8:30 ET) and this week’s Fed Symposium. Price continues to rotate inside balance, with 23,827 acting as the bull/bear pivot. Key Levels: • 🔼 23,980–24,000 → Breakout trigger • 🔼 23,900–23,940 → Upside acceptance zone • ⚖️ 23,827 → Line in the sand • 🔽 23,760–23,770 → Weekly pivot support • 🔽 23,742.50 → 3-day balance low • 🔽 23,700 → Downside target if balance fails Plan: • Range trade between 23,770–23,940 = scalping zone. • Break above 23,940 = target 24,000. • Break below 23,742.50 = target 23,700.
CME_MINI:NQ1!
by BrianPenrod
Do you really know what these Strategy Properties checkboxes do Hi everyone, I'm a Pine script developer and i’ve noticed that many people don’t fully understand what the checkboxes in the **Strategy Properties** section of TradingView actually do. So I’d like to quickly explain them with practical examples: 1. After Order is Filled Recalculates as soon as an order is opened or closed. For example, if you have a condition like “move stop-loss to entry after partial TP,” this allows it to update within the same candle. Without it, it only updates at candle close. Also, if you want to receive **intra-bar alerts**, you must enable this. 2. On Every Tick As the name suggests, it recalculates on every price movement. Sounds great, but if your strategy isn’t coded properly, you might see multiple entries for a single signal. Not recommended in most cases. 3. Using Bar Magnifier Updates using lower timeframes instead of just the current chart’s timeframe. Example: when checking past trades, sometimes price touches both TP and SL within the same candle — how do you know which triggered first? With this enabled, the strategy tester knows. I recommend it, but only if your strategy is coded correctly; otherwise, you might see unrealistic entries before candle close. 4. On Bar Close Executes trades strictly at candle closes, using the candle’s closing price. If not enabled, orders are executed at the **open of the next bar** instead. 5. Using Standard OHLC For charts like Heikin Ashi or Renko (which don’t use real prices), this option ensures more realistic backtests by using actual OHLC values. If you don’t enable it, your backtest results will be misleading. Definitely use it. My suggestion: - Always keep After Order is Filled and Using Standard OHLC enabled. - If your past trades look clean (no strange early entries), also use Bar Magnifier for more accurate results. Thanks for reading, stay safe out there!
CME_MINI:MNQ1!Education
by Milvetti