Get started

Exponential Moving Average (EMA)

AutoBiasProThe AutoBias indicator, built using Pine Script v6, is designed to identify market bias and generate trading signals by analyzing price action in conjunction with Open, High, Low, Close (OHLC) data. This indicator is ideal for traders aiming to capture trend direction and momentum shifts across various markets, such as forex, stocks, or cryptocurrencies, using OHLC patterns to confirm signals. How to Use the AutoBias Indicator with OHLC Setup: Apply the AutoBias indicator to your chart on a platform supporting Pine Script v6 (e.g., TradingView). Ensure OHLC candlestick data is visible on your chart for the chosen timeframe (e.g., 15-minute, 1-hour, or daily). Configure the indicator’s settings if customization is available, or use default parameters. Interpreting Signals: Bullish Bias: The indicator signals a potential uptrend when it detects a bullish configuration (specific to its logic). Confirm this with OHLC patterns, such as a strong bullish candlestick (large body with close near the high) or a series of higher highs and higher lows. Bearish Bias: A bearish signal is generated when the indicator identifies a downtrend. Validate this with OHLC patterns, such as a bearish candlestick (large body with close near the low) or lower highs and lower lows. Neutral/No Bias: If the indicator shows no clear bias (e.g., indecisive signals), check for OHLC patterns like doji candles or tight consolidation ranges, indicating a lack of trend direction. Trade Execution: Entry: For a bullish signal, enter a long position when a bullish OHLC pattern (e.g., engulfing bullish candle or strong close above the open) confirms the indicator’s signal. For a bearish signal, enter a short position when a bearish OHLC pattern (e.g., engulfing bearish candle or close below the open) aligns with the indicator. Confirmation: Only take trades when the indicator’s bias is supported by clear OHLC price action to reduce false signals. Exit: Exit long trades when the indicator shifts to a bearish bias or OHLC shows reversal patterns (e.g., shooting star or bearish engulfing). Exit short trades when a bullish bias emerges or OHLC displays patterns like a hammer or bullish engulfing. Trade Management: Stop-Loss: Set stop-loss levels based on OHLC data, such as below the low of the entry candle for longs or above the high for shorts. Take-Profit: Target key levels identified through OHLC analysis, such as recent swing highs/lows or a risk-reward ratio of 1:2 or higher. Trailing Stop: Adjust stops based on OHLC structure, trailing below higher lows for longs or above lower highs for shorts. Best Practices: Timeframe Alignment: Use higher timeframes (e.g., 4-hour or daily) for swing trading to filter noise, or lower timeframes (e.g., 5-minute) for scalping, ensuring OHLC patterns align with the indicator’s bias. Combine with Context: Analyze OHLC patterns near key support/resistance levels or during high-volume periods to increase signal reliability. Risk Management: Limit risk to 1-2% of capital per trade, using OHLC-derived stop-loss levels to manage exposure. Backtesting: Test the indicator and OHLC combination on historical data to assess performance in your chosen market and timeframe. Example Scenario Chart Setup: Apply AutoBias on a 1-hour EUR/USD chart with OHLC candlesticks. Observation: The indicator signals a bullish bias. A candlestick closes significantly above its open with a small lower wick, confirming strong buying pressure. Action: Enter a long position at the candle’s close. Set a stop-loss below the candle’s low and a take-profit at the next resistance level identified on the chart. Monitoring: Exit the trade if the indicator shifts to a bearish bias or a bearish OHLC pattern (e.g., close below open with a long upper wick) appears. Limitations The AutoBias indicator may generate false signals in choppy markets. Use OHLC patterns to filter out weak signals during consolidation. OHLC confirmation is subjective; practice identifying reliable patterns to avoid misinterpretation. Always backtest the indicator and OHLC strategy to ensure compatibility with your trading style and market conditions. By combining the AutoBias indicator with OHLC analysis, traders can make informed decisions, leveraging price action to confirm market bias and execute high-probability trades. This description focuses solely on the usage of the AutoBias indicator with OHLC, avoiding any mention of EMAs as requested. If you have specific details about the AutoBias indicator’s logic or additional features, please provide them for a more tailored explanation!
Pine Script® indicator
by milikgroupy_tv
DeltaCapital Combined SignalsThis all-in-one indicator is a powerful trading system that merges two distinct but complementary methodologies: advanced ICT (Inner Circle Trader) concepts and a versatile 3-in-1 signal system. The goal is to provide a comprehensive view of market structure, liquidity, and momentum, allowing traders to identify high-probability setups with greater confidence. The script is designed to be fully customizable, enabling you to tailor the visual elements and parameters to fit your specific trading style. Core Components & How They Work The indicator is built on two main pillars: 1. ICT Concepts: Identifying Key Price Zones This part of the indicator automatically identifies and plots crucial areas of price imbalance and liquidity, which often act as magnets for future price action. Fair Value Gaps (FVG) & BPR: FVG (Fair Value Gap): A three-candle pattern that indicates a significant price inefficiency or imbalance. Bullish FVGs (green boxes) are areas where buying pressure was strong, and Bearish FVGs (red boxes) show where selling pressure dominated. Price will often seek to return to these zones to "rebalance." BPR (Balanced Price Range): A more complex pattern where a bullish and bearish FVG overlap, creating a highly contested zone of equilibrium. These are powerful areas of support and resistance. Volume Imbalance (VI): Detects gaps between the open and close of consecutive candles, highlighting areas where volume was heavily one-sided. These zones signal aggressive market participation and can act as short-term support or resistance. Price Gaps: Marks traditional weekend or session gaps where no trading occurred. These are significant levels that the market often aims to fill. Mitigation Logic: All ICT boxes are dynamic. They will extend into the future until price mitigates them. You can choose the mitigation criteria: Engulf: The box is considered filled once a candle closes past its boundary. Mitigate/C.E.: The box is considered filled once price simply touches it (for FVGs/VIs) or reaches its 50% "Consequent Encroachment" level (for Gaps). Rebalance: A more advanced FVG mitigation that partially fills the box as price moves through it. 2. 3-in-1 Signal System: Trend & Momentum This system provides clear entry signals based on a confluence of trend, higher-timeframe context, and volume analysis. EMA Clouds: The script plots multiple EMA clouds that serve as dynamic support and resistance zones. A green cloud indicates a bullish trend, while a red/maroon cloud signals a bearish trend. The primary signal is the EMA Cross, marked by a triangle, which occurs when the short-term EMA crosses over the long-term EMA. HTF (Higher Timeframe) Volume Analysis: This unique feature looks at the volume delta (buying vs. selling volume) on a higher timeframe of your choice (e.g., 1-hour chart while you are on a 5-minute chart). It provides a broader context for the market trend. A bullish HTF signal suggests that the larger trend aligns with your potential entry. The HTF Combined Signal (labeled "HTF") appears only when an EMA Cross occurs while the HTF volume is also in agreement, providing a high-conviction signal. The chart background will also change color (green for bull, red for bear) to reflect the HTF trend. Volume Delta Signals: This component analyzes the relative strength of buying vs. selling pressure on your current timeframe. A diamond shape appears when a significant surge in volume delta occurs, confirming strong momentum in the direction of the trend. How to Use This Indicator Identify Key Zones: Use the FVG, BPR, and Gap boxes to map out important support and resistance levels where you expect a market reaction. Determine the Trend: Use the EMA clouds and the HTF background color to understand the current trend direction. Trading in the direction of the trend generally yields better results. Look for Confluence: The most powerful signals occur when multiple components align. For example, a bullish EMA Cross signal (triangle) that appears at the bottom of a Bullish FVG box, while the HTF background is green, is a high-probability long setup. Confirm with Momentum: Use the Volume Delta signal (diamond) as a final confirmation that strong momentum is entering the market to support your trade. Customize: Adjust the EMA lengths, HTF settings, and colors in the indicator settings to match your preferred trading instruments and timeframes.
Pine Script® indicator
by Jt8_trades
LANZ Strategy 5.0🔷 LANZ Strategy 5.0 — Intraday BUY Signals, Dynamic Lot Size per Account, Real-Time Dashboard and Smart Execution LANZ Strategy 5.0 is a powerful intraday tool designed for traders who need a visual-first, data-backed BUY system, enhanced with risk-aware lot size calculation and a real-time performance dashboard. This indicator intelligently detects strong momentum setups and provides visual and statistical clarity throughout the session. 📌 This is an indicator, not a strategy — It does not place trades automatically but provides precise conditions, alerts, and visual guides to support execution. 🧠 Core Logic & Features BUY Entry Conditions (Signal Engine) A BUY signal is triggered when: The current price is above the EMA200 (trend filter) The last 3 candles are bullish (candle body close > open) You are within the defined session window (NY time) When all conditions are met and you haven’t reached the daily trade limit, a signal appears on the chart and an optional alert is triggered. Operational Hours Filter (NY Time) You define: Start time (e.g., 01:15 NY) End time (e.g., 16:00 NY) The system only evaluates and executes signals within this period. If a BUY setup occurs outside the window, it’s ignored. The chart is also highlighted with a transparent teal background to visually show active trading hours. Lot Size Panel with Per-Account Risk Management Designed for traders managing multiple accounts or capital sources. You can enable up to 5 accounts, each with: Its own capital Its own risk percentage per trade The system uses the defined SL in pips, plus the instrument’s pip value, to calculate the lot size per account. All values are shown in a dedicated panel at the bottom-right, automatically updating with each new trade. The emojis (🐣🦊🦁🐲🐳) distinguish each account visually. Trade Visualization with Customizable Lines When a signal is triggered: An Entry Point (EP) line is drawn at the candle’s close. A Stop Loss (SL) line is placed X pips below the entry. A Take Profit (TP) line is placed Y pips above the entry. All three lines are fully customizable in style, color, and thickness. You define how many bars the lines should extend. Outcome Tracking & Real-Time Dashboard Each trade outcome is measured: SL hit = –1.00% TP hit = +3.00% Manual close = calculated dynamically based on price at close time Each result is labeled on the chart near its level, and stored. The top-right dashboard updates in real time: ✅ Number of trades 📈 Cumulative % gain/loss of the day (color-coded) Alerts You Can Trust: You’ll get a Buy Alert when a valid signal is formed You’ll get a Trade Executed Alert when the visual operation is plotted You’ll get a SL/TP Hit Alert with price and result You’ll get a Manual Close Alert if the configured time is reached and the trade is still active ⚙️ Step-by-Step Execution Flow At every bar, the system checks: Are we within the session time window? Is price above EMA? Are the last 3 candles bullish? ✅ If yes: A BUY signal is plotted Entry/SL/TP lines are drawn Lot sizes are calculated and displayed Trade is added to the daily count 🕐 At the configured Manual Close time (e.g., 16:00 NY): If the trade is still open, it's closed A label is added with the exact result in % 💡 Ideal For: Intraday traders who operate within fixed time sessions Traders managing multiple accounts or capital pools Anyone who wants full visual clarity of every decision point Traders who appreciate dynamic lot size calculation and clean execution tracking 👨‍💻 Credits: 💡 Developed by: LANZ 🧠 Strategy concept & execution model: LANZ 🧪 Tested on: 1H charts with visual-only execution 📈 Designed for: Clarity, adaptability, and full intraday control
Pine Script® indicator
by rau_u_lanz
Vincent's EMA Alert Setup V3📊 EMA Cross Alert & Entry System – Precision Crypto Signals This script is designed for traders who want clean, actionable signals based on Exponential Moving Average (EMA) crossovers. Whether you're scalping, day trading, or swing trading crypto, this tool helps you catch momentum shifts before the crowd. 🔍 Key Features: Detects bullish and bearish EMA crossovers in real time Automatically triggers alerts when crossover conditions are met (Long or Short bias) Visually marks entry zones on the chart with precision Compatible across multiple timeframes (1min, 5min, 15min, etc.) Ideal for volatile, trending assets like BTC, ETH, XRP, SOL and more 🎯 How to Use: Use the alerts as your entry confirmation, integrate them with your risk management system, or combine them with higher time frame analysis for optimal trade setups. This script adds clarity and structure to fast-paced crypto environments.
Pine Script® indicator
by vncentq
Innotrade Octo Moving Averages with AlertsThe "Octo MA with Dynamic Labels & Alerts" is a complete and highly versatile moving average toolkit designed for the discerning trader. This powerful indicator plots up to eight fully independent moving averages (MAs) on your chart, providing a comprehensive framework for trend analysis, price action, market dynamic, support and resistance, and trade signaling via Alerts. Developed by Innotrade, this all-in-one script combines extensive customization with a powerful, modern alert system. Each moving average can be configured with its own type (SMA, EMA, or SMMA), length, and source. Whether you are a day trader using short-term MAs or a long-term investor tracking major trend lines, this indicator can be tailored to your exact strategy. Key Features Eight Independent Moving Averages: Plot up to eight MAs simultaneously, each with its own unique settings for type, length, and source. Multiple MA Types: Choose between a Simple Moving Average (SMA), Exponential Moving Average (EMA), and Smoothed Moving Average (SMMA) for each of the eight lines. Dynamic Slope Coloring: The color of each MA can dynamically change based on its slope. This provides an immediate visual cue of the trend's direction and momentum—no more second-guessing if the trend is up, down, or flat. Volatility Clouds: Each MA can be paired with an optional volatility cloud based on Standard Deviation. These clouds act as powerful, dynamic support and resistance zones. Informative Labels: To eliminate confusion, the indicator automatically displays a clear label for each MA on the last bar. The label shows the MA type and length (e.g., "EMA 50"), so you always know which line is which. Modern & Dynamic Alert System: The indicator uses the modern alert() function to deliver precise, dynamic notifications. Get notified the moment the price crosses any of the eight MAs. The alert message is fully dynamic, telling you exactly which MA was crossed (e.g., "Price crossed EMA(200)"). Individually toggle alerts on or off for each of the eight MAs in the settings. Full Customization: Nearly every visual aspect is customizable—colors, line widths, cloud opacity, label positioning, and more—allowing you to create the perfect chart setup. How to Use This Indicator Trend Identification: Use a "ribbon" of multiple MAs to gauge trend strength. When the MAs are stacked in order (shortest to longest) and fanning out, it signals a strong trend. The slope coloring provides instant confirmation. Dynamic Support & Resistance: In an uptrend, look for price to pull back and find support at key MAs (like the 20 EMA or 50 SMA). In a downtrend, use them as areas of resistance. Crossover Signals: Easily configure two MAs for classic "Golden Cross" (e.g., 50 crossing 200) or "Death Cross" signals. Automated Chart Monitoring: Set up alerts on critical MAs (like the 200 EMA on a daily chart) to be notified of significant trend changes without having to watch the screen all day. How to Set Up Alerts (Important Instructions) This indicator uses the modern alert() function. The setup is simple but specific: Add the indicator to your chart. Go to the indicator's Settings. Under the "Alert Settings" tab, check the boxes for each MA you want to monitor (e.g., "Enable MA 4 Cross Alert"). Click the Alert icon (clock) in the TradingView toolbar on the right. In the "Condition" dropdown, select "Innotrade Octo MA". In the second dropdown right below it, you MUST select "Any alert() function call". For "Options," we recommend choosing "Once Per Bar" to prevent multiple alerts for the same event. Give your alert a name and click "Create". Your alert is now active and will trigger with a dynamic message whenever the price crosses one of your selected moving averages. Disclaimer: This indicator is a tool for technical analysis and should not be considered a standalone trading system. Always combine its signals with other forms of analysis and robust risk management principles. Created by Innotrade
Pine Script® indicator
by Innotrade_AJ
Advanced Trend Panel v3.0Advanced Trend Panel v3.0 is a comprehensive indicator that analyzes market trends across multiple timeframes. It combines long-term and short-term EMAs, ADX for trend strength, RSI, Volume Profile (POC), and volume comparisons. The script calculates trend duration (in bars or time units) and provides a higher-timeframe forecast for context. All data is displayed in a customizable table with adjustable position and text size. Key Features: - Long/Short Trend States with Duration - Trend Strength via ADX - Price vs. POC - RSI Overbought/Oversold - Volume Analysis - Higher TF Trend Forecast - Optional Plots for EMAs and POC Line Customize inputs to fit your strategy. This script is for educational purposes and not financial advice. Use at your own risk.
Pine Script® indicator
by TiamatCrypto
QBCore SuperRSI ProLet’s Get Rich Together 💰 QBCore SuperRSI Pro — Multi-Timeframe RSI System This script provides a smart and clean way to analyze RSI across multiple timeframes in real time. It calculates RSI values for 5 configurable timeframes and gives an overall average RSI score for sniper-level buy/sell decision making. ✅ Buy when AVG RSI is near 25-39 with bullish divergence ✅ Sell when AVG RSI is near 60-70 with bearish divergence ✅ Works best with trend confirmation, support/resistance, or smart confluence logic ✅ Includes divergence detection, MA filter, customizable alerts, and clean dashboard layout Perfect for scalpers, swing traders, and bot signal integration. Let the RSI from all timeframes guide you toward smarter entries.
Pine Script® indicator
by QBCore
EMA Pullback Indicator [ATR-based]🟦 EMA Pullback Indicator This indicator identifies pullbacks in trending markets using the crossover of two EMAs (Fast and Slow). When a pullback occurs during a valid trend, an entry is triggered after price resumes in the trend direction. ATR is used to dynamically calculate stop-loss and take-profit levels. 🔍 Strategy Logic: Trend Detection: EMA(8) vs EMA(21) Pullback Zones: In a bullish trend, a pullback is when price dips below the Fast EMA In a bearish trend, a pullback is when price rises above the Fast EMA Entry Trigger: Re-entry into trend direction after pullback Stop Loss / Take Profit: Based on ATR × SL/TP multipliers Exit Options: TP/SL Hit Exit on new pullback (optional toggle) Multiple Entry Toggle: Choose whether to allow multiple pullback entries or not ⚙️ Inputs: Fast EMA Length Slow EMA Length ATR Period SL Multiplier TP Multiplier Allow Multiple Entries Exit on New Pullback 📊 Visuals: Colored EMAs and fill zone between them Grey bars during pullback Blue/Black trend bar colors Entry markers and TP/SL levels with labels Real-time ATR display in corner 📢 Alerts Included: Long/Short Pullback Entry Take Profit Hit Stop Loss Hit
Pine Script® indicator
by vineeth059
Jitendra MTF AIO Technical + Trend Analysis ▲▼Summary of “Jitendra MTF AIO Technical + Trend Analysis ▲▼ 🔍 Purpose This script is a multi-timeframe (MTF) technical analysis dashboard that displays multiple indicators, trends, divergences, and volume signals in a dynamically structured table format on the chart. It also overlays key EMAs and optionally Bollinger Bands. How It's useful or How Can You Change Setting drive.google.com How to Analysis Data For Bullish & Bearish Trade GREEN Background Shows Positive Crossover and RED Background Shows Negative Crossover If LTP Above VWAP, it will show value with GREEN Background else RED Background If MACD Line Above Signal line it will show GREEN Background or MACD Line Below Signal line it will show RED Background Data Positive/negative value Value help us to find its above Zero or Below Zero Line ▲ = MACD rising, ▼ = MACD falling show current value is improving or losing as compare to prev value RSI Data Value with Background Color to Find in Which Time Frame it is in High Strength RSI Above 60 Show value with AQUA Color 🟦 RSI Between 40-60 Show value with GREEN Color 🟩 RSI Below 40 Show value with RED Color 🟥 ADX ,+DI, -DI Color > 25 🟦 color.aqua Strong trend (bullish or bearish) 18–25 🟩 color.green Moderate trend (developing trend) < 18 🟥 color.red Weak or no trend (sideways/consolidation) Types of Divergence Detected ✅ Bullish Divergence Price makes lower low, RSI makes higher low "✔ Bullish" ❌ Bearish Divergence Price makes higher high, RSI makes lower high "✔ Bearish" ✅ Hidden Bullish Divergence Price makes higher low, RSI makes lower low "✔Bullish RD" ❌ Hidden Bearish Divergence Price makes lower high, RSI makes higher high "✔Bearish RD" ⚪ None No divergence detected "-" Table EMA Color Coding Price > EMA 🟩 Green Bullish (price above EMA) Price < EMA 🟥 Red Bearish (price below EMA) Volume Matrix Description Volume Actual volume for the candle 20 SMA Volume 20-period simple moving average of volume (avg vol) Volume % Rise % difference of current volume vs 20 SMA volume Volume > SMA Volume 🟢 Green Bullish / high interest Volume < SMA Volume 🔴 Red Low interest Bollinger Band If Band is Challenged Upside with RSI value Above 60+ And ADX above 20 it is in High Bullish Momentum , if 1 Higher Timeframe also supporting such value If Band is Challenged Downside with RSI value Below 40 And ADX above 20 it is in High Bearish Momentum , if 1 Higher Timeframe also supporting such value Stochastic Oscillator Stochastic Oscillator is a momentum indicator comparing the current closing price to a range of its prices over a specific period. It indicates overbought and oversold conditions. For Perfect Entry in Bullish Trade If Higher TF Stochastic in oversold zone and doing Positive crossover, and also lower TF Stochastic will do positive crossover it will give High Probability Uptrend Entry For Perfect Entry in Bearish Trade If Higher TF Stochastic in Bought zone and doing Negative crossover, and also lower TF Stochastic will do Negative crossover it will give High Probability Uptrend Entry %K (Fast): Measures current close vs the high-low range over the last 14 bars. %D (Slow): 3-period SMA of %K. %K above %D will show GREEN background %K below %D will show RED background Low Value, below 20 with GREEN background means it just done Positive Cross over from oversold zone High Value with RED background means it just done negative Cross over from oversold zone ======== COMMUNICATIVE SHORT DESCRIPTION OF ALL INDICATOR========= TF Timeframe label (e.g., CurTF, 1h, 4h, D, W, M) VWAP Value of VWAP; green = price above, red = price below MACD MACD Line Value Trend ▲ = MACD rising, ▼ = MACD falling MACD Hist MACD Histogram value (if enabled) RSI RSI Value with background color showing strength RSI▲▼ ▲ = RSI rising, ▼ = RSI falling ADX ADX strength (trend strength, colored) ADX▲▼ ▲ = ADX rising, ▼ = falling +DI Positive Directional Indicator +DI▲▼ ▲/▼ for DI+ trend -DI Negative Directional Indicator -DI▲▼ ▲/▼ for DI- trend Div RSI divergence type: Bullish, Bearish, Hidden, or None (✔ or -) EMA5 EMA5 value; green = price above, red = price below EMA21 EMA21 value (same color logic as above) EMA50 EMA50 value (same logic) Cross ▲ = EMA5 > EMA21, ▼ = EMA5 < EMA21 Stoch %K %K value; green = K > D, red = K < D Vol Volume for that TF; green = above avg, red = below avg AvgVOL20 20 SMA of volume %Vol Chng % Change in volume from its 20 SMA; green = rising, red = falling ======================================================== 📊 Core Features & Code used to Fetch Calculate Data Using request.security() to fetch data from different timeframes ✅ Indicator Plotting on Chart EMA 1 & EMA 2: Plotted as overlays with customizable lengths and toggle. Bollinger Bands: Optional plotting of upper, lower, and basis lines. 🧮 Multi-Timeframe Support Supports analysis for: Current Timeframe (optional) 1H, 4H, Daily, Weekly, and Monthly (customizable & optional) 📈 Indicators Displayed per Timeframe Each selected timeframe row shows the following (based on toggles): ➤ VWAP Status Price above or below VWAP with color indication vwapVal = ta.vwap(hlc3) vwapColor = close > vwapVal ? color.green : color.red ➤ MACD MACD value Optional MACD Trend Arrow (▲/▼) Optional MACD Histogram = ta.macd(close, 12, 26, 9) macdColor = macdLine > signalLine ? color.green : color.red ➤ RSI RSI value with dynamic background color (green, aqua, red) Optional RSI arrow (based on RSI momentum direction) rsi = ta.rsi(close, 14) rsiColor = rsi > 70 ? color.red : rsi < 30 ? color.green : color.gray rsiArrow = rsi > rsi ? "▲" : rsi < rsi ? "▼" : "-" rsiArrowColor = rsi > rsi ? color.green : rsi < rsi ? color.red : color.gray ➤ ADX ADX value with strength-based coloring Optional ADX trend arrow ➤ +DI / -DI Directional movement values with optional trend arrows ad = ta.adx(14) adxColor = ad > 25 ? color.aqua : ad >= 18 ? color.green : color.red ➤ RSI Divergence Detects and displays: Regular Bullish / Bearish Divergence Hidden Bullish / Bearish Divergence isBullishDiv = (low < low ) and (rsi > rsi ) isHiddenBullDiv = (low > low ) and (rsi < rsi ) ➤ EMA Status Displays EMA 1/2/3 value Shows whether price is above (green) or below (red) Optionally displays EMA1 vs EMA2 crossover as ▲ / ▼ ema = ta.ema(close, length) emaColor = close > ema ? color.green : color.red crossSymbol = ema5 > ema21 ? "▲" : ema5 < ema21 ? "▼" : "-" ➤ Stochastic %K line with color-coded trend vs %D k = ta.stoch(close, high, low, 14) d = ta.sma(k, 3) stochColor = k > 80 ? color.red : k < 20 ? color.green : color.gray ➤ Volume Matrix Volume 20 SMA Volume % Change in Volume from 20 SMA Backgrounds indicate rising/falling volume trend smaVolume = ta.sma(volume, 20) volRise = ((volume - smaVolume) / smaVolume) * 100 🧠 Modular Settings All features have individual on/off toggles in the input panel. User can also customize: EMA lengths Stochastic smoothing parameters Divergence lookback settings Table position and text size 📐 Dynamic Table Header row and rows per timeframe Column count automatically adjusts based on enabled indicators ~~~~~~~~~~~~~~~~~~~~~~ ------------------------------- Thanks Jitendra ------------------------------- ~~~~~~~~~~~~~~~~~~~~~~
Pine Script® indicator
by radhe396
TeeLek-HedgingLineXThis indicator is suitable for use with charts that are Down Trend and are about to change to Sideway or Up Trend. It works opposite to another indicator that I created called TeeLek Hedging Line. Calculation method : We will use the Highest value of 600 candlesticks in the past to create the average line. After that, we will create the All Time Low line. How to use : It is used to tell that this point is the lowest historical High value. This means that this is the point where the best Short buyers start to reach the loss point. At the same time, it is the point where the worst Long buyers start to make a profit. Therefore, it is suitable to be the point of changing from Down Trend to Up Trend. There are 2 lines that are used to divide the range. If the graph is at the bottom, it will be Down Trend. If the graph is in the middle, it will be Sideway. And if the graph is at the top of both lines, it will be Up Trend. //------------------------------------------------------------------- อินดิเคเตอร์นี้ เหมาะสำหรับใช้กับกราฟที่เป็น Down Trend และกำลังจะเปลี่ยนเป็น Sideway หรือ Up Trend จะทำงานตรงข้ามกับ อินดิเคเตอร์อีกตัวที่ผมสร้างขึ้นมา ที่ชื่อว่า TeeLek Hedging Line วิธีการคำนวณ เราจะใช้ค่า Highest 600 แท่งเทียนย้อนหลัง ในการสร้างเส้นค่าเฉลี่ย หลังจากนั้น ก็จะสร้างเส้น All Time Low ขึ้นมา วิธีใช้งาน เอาไว้บอกว่า จุดนี้คือ ค่า High ย้อนหลังที่ต่ำที่สุด หมายความว่า นี่คือจุดที่คนซื้อ Short ที่ดีที่สุดก็เริ่มถึงจุดขาดทุน ขณะเดียวกัน ก็เป็นจุดที่คนที่ซื้อ Long ที่แย่ที่สุด เริ่มกำไร จึงเหมาะจะเป็นจุดเปลี่ยนจาก Down Trend ไปเป็น Up Trend มี 2 เส้น ก็เอาไว้ใช้แบ่งช่วง ถ้ากราฟอยู่ด้านล่าง จะเป็น Down Trend ถ้ากราฟอยู่ระหว่างกลางก็จะเป็น Sideway และถ้ากราฟอยู่ด้านบนของทั้งสองเส้น ก็จะเป็น Up Trend
Pine Script® indicator
by TeeLek
2EZ-UA-MI🔹 2EZ-UA-MI – Master Indicator One tool to master all trades. 2EZ-UA-MI is the flagship of the UltimateAlgos suite. This multi-dimensional, all-in-one system is engineered for swing trading, trend positioning, and high-timeframe confluence-based entries. Whether you're trading crypto breakouts or stock rotations, this tool gives you a full map of the market—layered, logical, and reliable. Core Features: 🧠 Smart Confluence Engine: Merges Kalman, Gaussian, MACD flips, ZLEMA, and HA SuperTrend 🧠 Dual Modes: Beginner Mode: Clean TP/SL entries with clear signals Advanced Mode: Wave logic, trend overlays, and confluence stack visuals 🧠 ATR-Based Risk Zones: Dynamic TP/SL levels adjust to market conditions 🧠 Wave Detection System: Understand market structure through cyclical motion 🧠 Multi-Timeframe Support: Designed for 15m up to 1D charts 🧠 Real-Time Labels: Every entry has purpose—no more second-guessing 🧠 Custom Alerts: Stay ahead even when you’re off the chart When to Use: For high-confidence swing entries based on trend structure During key breakouts, reversals, and macro directional shifts To align lower timeframe trades with larger timeframe bias Why It Wins: 2EZ-UA-MI replaces cluttered charts and conflicting signals with clean, calculated logic. It’s the trader’s GPS—mapping high-probability zones, providing context, and giving you a full battlefield view of price action.
Pine Script® indicator
by x02ez
Jitendra: MTF AIO Technical Indicators with Trend ▲▼🧠 Indicator Name: Jitendra: Multi Timeframe All In One Technical Indicators with Trend ▲▼ 📌 Purpose : A multi-timeframe technical analysis dashboard that visualizes a wide set of technical indicators in a table, supporting up to 6 timeframes (current + 5 custom), along with chart plots of EMA, VWAP, Bollinger Bands, and Supertrend ✅ Use Cases Multi-timeframe swing or intraday trading Quick decision dashboard for: Momentum Volume strength Trend direction Overbought/oversold detection EMA crossovers and trend filters How to Use & Change Setting Complete Details of every Toggle drive.google.com ========================================== 📊 Logic & Presentation Uses request.security() to fetch indicator values for each selected timeframe. Calculates RSI/ADX/DI/MACD/Stochastic values per TF. Plots a table dynamically with headers and rows built at runtime. Applies conditional coloring to indicate direction/momentum visually. Uses arrays and string splitting to manage multiple EMA values per timeframe. Super efficient get_vals() and fill_row() modular functions. 📋 Key Features Overview : 1. Chart Plots (Overlay) VWAP line 4 EMAs (custom lengths, color-coded) 2 Supertrend lines with different ATR multipliers and lengths Bollinger Bands with configurable length and deviation 2. Multi-Timeframe Table A dashboard showing indicator values across: Current TF Custom TF1 → TF5 (e.g., 1H, 4H, D, W, M) 3. Indicators Displayed in Table (Toggle ON/OFF) VWAP position (Above/Below) MACD (value + trend arrow + optional histogram) RSI (value + trend arrow) ADX and DI+ / DI- (values + trend arrows) Stochastic K value EMA Status (EMA1, EMA2, EMA3 with up/down based on price) EMA Crossovers (symbol ▲▼ for EMA1 vs EMA2) RSI Divergence (Regular + Hidden: Bullish/Bearish) Volume Matrix: Raw Volume 20 SMA of Volume Volume % Change 4. Divergence Detection (RSI) Uses pivot highs/lows to detect: Bullish/Bearish divergence Hidden Bullish/Bearish divergence 5. Color Coding Trend direction is visualized using: Green (Bullish), Red (Bearish), Gray (Neutral) Dynamic table cell background for easy interpretation 6. Customizations & UI Table Position: 9 options (top/bottom/center, left/right) Text size options: tiny to huge Modular toggle system: selectively enable indicators and TFs ⚙️ Inputs (Grouped by Functionality) 🔹 Moving Averages / VWAP / Bollinger Bands Show/hide toggles Custom EMA lengths (5, 21, 50, 200) Bollinger Band length and deviation 🔹 Supertrend Settings Two independent Supertrend inputs ATR Period & Multiplier 🔹 RSI Divergence Settings Pivot lookback bars for left/right swing point detection 🔹 Stochastic %K Length, %K & %D smoothing 🔹 MACD Histogram and trend arrow toggle 🔹 ADX/DI ADX Smoothing and DI period 🔹 Volume Toggles for: Raw Volume Volume SMA (20) Volume % Rise 🎨 Color Coding Logic Summary The script uses dynamic background and text colors in the table and plots to highlight trend direction, strength, and conditions visually: RSI Coloring val > 60 → Aqua (Strong / Overbought) val 40–60 → Green (Neutral/Healthy) val < 40 → Red (Weak / Oversold) ADX / +DI / -DI Coloring val > 25 → Aqua (Strong trend) val 18–25 → Green (Moderate trend) val < 18 → Red (Weak trend) VWAP Position Close > VWAP → Green (Bullish) Close < VWAP → Red (Bearish) Close = VWAP → Gray (Neutral) Direction Arrows ▲ Green (Bullish) ▼ Red (Bearish) EMA Background Color Close > EMA → Green background (Price above EMA) Close < EMA → Red background (Price below EMA) EMA Cross Symbol EMA1 > EMA2 → ▲ Green EMA1 < EMA2 → ▼ Red Equal → - Gray Stochastic %K Coloring K > D → Green (Bullish crossover) K < D → Red (Bearish crossover) K = D → Gray (Neutral) 📊 Volume % Change Coloring volPct > 0 → Green (Increased volume) volPct < 0 → Red (Decreased volume) volPct = 0 → Gray Thanks Happy Trading / Comment for Any Query or More Information about Setting
Pine Script® indicator
by radhe396
Trend Continuation IndicatorTrend Continuation Indicator The Trend Continuation Indicator is designed to assist traders in identifying potential continuation setups within established market trends. It is particularly suited for use in strong trending environments and is optimized for lower timeframes, with a recommended chart setting of 5-minute candles and an EMA timeframe set to 1 hour. The indicator combines multiple technical elements: RSI (Relative Strength Index): Used to assess potential overbought and oversold conditions relative to the trend. EMA (Exponential Moving Average): A multi-timeframe EMA is used as a directional filter, helping to align entries with the broader trend. Candle Structure and Momentum Filters: The logic includes real-time candle analysis and volume dynamics to identify momentum-driven signals. Buy signals are generated when price action shows bullish momentum and RSI confirms potential oversold conditions within an uptrend. Conversely, sell signals are triggered when bearish momentum aligns with overbought RSI levels in a downtrend. This tool is intended for use as part of a broader trading strategy and is best applied in trending markets where continuation patterns are more likely to follow through. THE INDICATOR ITSELF IS NO FINANCIAL ADVISE! Here are some usecase examples:
Pine Script® indicator
by FunStriker
Momentum-Reversal System Signals Pro Momentum-Reversal System Signals Pro Overview A sophisticated signaling system designed to identify high-probability trend-following entries after a price pullback. This indicator is optimized for index futures like the S&P 500 (ES/SPX) on a 5-minute timeframe . It performs best during periods of established trends and lower volatility. To aid in this, the indicator includes a customizable "No-Trade Zone" highlighter, which is pre-set to the often volatile 8:30 AM - 11:30 AM EST market open. While the default settings are robust and effective in most conditions, the indicator is fully customizable to suit your specific trading style. How It Works The core logic is based on a three-step process to filter for high-quality setups: Trend Confirmation: The script first establishes the overall market direction using an EMA on a higher timeframe (15-minute by default). This ensures you are only looking for trades that align with the dominant trend. Pullback Detection: Once the trend is confirmed, the script waits for the price to pull back to a dynamic area of value on the main chart (5-minute by default). This "pullback zone" is defined by the 5m EMA and an ATR-based channel around it, which adapts to current market volatility. Momentum Entry: After a valid pullback occurs, the script waits for a clear sign that momentum is returning in the direction of the primary trend. This is confirmed by a combination of a MACD crossover and a strong RSI reading, signaling that the pullback has likely ended and the trend is ready to resume. Advanced Quality Filters What makes this indicator powerful is its multi-layered filtering system designed to weed out low-probability signals and avoid choppy market conditions. Trend Strength: It doesn't just check the trend direction; it measures the slope of the 15m EMA to ensure the trend has sufficient strength. This is a key filter for avoiding flat, sideways markets. Momentum Confirmation: An RSI "Dead Zone" around the 50-level ensures that the RSI shows decisive momentum before a signal is generated. Signal Cooldown: A built-in timer ( Min Bars Between Signals ) prevents the same signal from firing repeatedly in a short period, reducing noise and over-trading. RSI Volatility: The script checks that the RSI itself is not flat, which is often a sign of market indecision and a precursor to chop. Pullback Quality: An optional filter ensures that by the time the signal fires, the price has already moved back to the "correct" side of the 5m EMA, confirming the reversal's strength. Volatility Filter: A crucial risk management filter that blocks signals on abnormally large, high-risk "gasoline" bars that could lead to immediate stops. How To Use For Long Signals (Green 'Long' Tag): Look for the 15m EMA to be green and trending upwards. Wait for price to pull back towards the orange 5m EMA. A "Long" signal appears when momentum indicators confirm a reversal back in the direction of the trend. For Short Signals (Red 'Short' Tag): Look for the 15m EMA to be red and trending downwards. Wait for price to pull back towards the orange 5m EMA. A "Short" signal appears when momentum indicators confirm a reversal back in the direction of the trend. This tool provides high-probability signals, not guarantees. It is designed to be a core component of a complete trading plan. Always use proper risk management and confluence from your own analysis. Fine-Tuning & Customization All settings are fully adjustable in the script's "Inputs" tab to match your risk tolerance and market conditions. Timeframe & EMA Settings: Adjust the core moving averages that define the trend and pullback zones. Pullback Settings: Define what constitutes a valid pullback by adjusting the lookback period and the size of the ATR-based "near" zone. Quality Filters: This is the most important section for tailoring the script's strictness. Increase the EMA Slope, RSI Dead Zone, or Signal Cooldown to receive fewer but potentially higher-quality signals. Advanced Filters: Enable or disable the Pullback Quality and Volatility filters for an extra layer of confirmation or risk management. No-Trade Zone Highlighter: Adjust the session and timezone to highlight periods you wish to avoid, such as news events or low-liquidity hours. Happy trading, and please use this tool responsibly.
Pine Script® indicator
by igaudette
Hybrid Strategy with Position Control//@version=6 indicator('Hybrid Strategy with Position Control', overlay=true) // === INPUTS === emaFastLen = input.int(8, 'Fast EMA') emaSlowLen = input.int(21, 'Slow EMA') rsiLen = input.int(14, 'RSI Length') rsiOverbought = input.int(70, 'RSI Overbought') rsiOversold = input.int(30, 'RSI Oversold') macdFast = input.int(12, 'MACD Fast') macdSlow = input.int(26, 'MACD Slow') macdSignal = input.int(9, 'MACD Signal') // === CALCULATIONS === emaFast = ta.ema(close, emaFastLen) emaSlow = ta.ema(close, emaSlowLen) rsi = ta.rsi(close, rsiLen) = ta.macd(close, macdFast, macdSlow, macdSignal) // === POSITION TRACKING === var int position = 0 // 0 = no position, 1 = long, -1 = short // === ENTRY CONDITIONS === longCondition = ta.crossover(emaFast, emaSlow) and rsi < rsiOverbought and macdLine > signalLine and position != 1 shortCondition = ta.crossunder(emaFast, emaSlow) and rsi > rsiOversold and macdLine < signalLine and position != -1 // === EXIT CONDITIONS (Optional logic for reset) === exitLong = ta.crossunder(emaFast, emaSlow) exitShort = ta.crossover(emaFast, emaSlow) // === SIGNAL PLOTS === buySignal = longCondition sellSignal = shortCondition plotshape(buySignal, title='Buy Signal', location=location.belowbar, color=color.green, style=shape.triangleup, size=size.small, text='BUY') plotshape(sellSignal, title='Sell Signal', location=location.abovebar, color=color.red, style=shape.triangledown, size=size.small, text='SELL') // === STATE MANAGEMENT === if (longCondition) position := 1 if (shortCondition) position := -1 // Reset position if trend reverses if (exitLong and position == 1) position := 0 if (exitShort and position == -1) position := 0 // === PLOT EMAs === plot(emaFast, color=color.orange, title='Fast EMA') plot(emaSlow, color=color.blue, title='Slow EMA')
Pine Script® indicator
by srikanthreddyinvst
Innotrade Price Action Reversal Entry CandlesInnotrade Price Action Reversal Entry Candles This indicator is designed to help traders identify high-probability reversal entry points. It combines a classic two-candle reversal pattern with an intelligent moving average confirmation filter to increase the likelihood of successful trades and reduce false signals. The "Innotrade PA Reversal Entry Candles" indicator not only visualizes potential turning points but also qualifies them by highlighting only the strongest setups with a clear "L" (Long) or "S" (Short) signal. Key Features Dynamic Two-Candle Reversal Detection: Setup Candle: The first candle initiating a potential reversal is subtly colored (e.g., light green after a red candle). Entry Candle: The second, confirming candle of the pattern is marked with a more prominent color to clearly visualize the potential entry point. Intelligent MA Trend Filter & Entry Confirmation: This is the core of the indicator. It filters reversal signals based on their quality: Long Signal (L): An "L" appears below a bullish entry candle only if it closes above both moving averages (EMA & SMA). This signals a strong long entry confirmed by the uptrend. Short Signal (S): An "S" appears above a bearish entry candle only if it closes below both moving averages. This signals a strong short entry confirmed by the downtrend. Integrated Moving Averages: An Exponential Moving Average (EMA) and a Simple Moving Average (SMA) are included directly in the indicator (default length 50). The lines are automatically labeled on the last bar, so you always know which line is which. Comprehensive Customization: Fully adapt the indicator to your personal trading style. Strategy and Application Look for High-Quality Signals: The strongest signals are the colored entry candles that also display an "L" or "S" label. Long Entries: An "L" below a bright green candle signals a high probability of an upward move, as the reversal pattern is confirmed by the prevailing trend (price above the MAs). Short Entries: An "S" above a bright red candle signals a high probability of a downward move, as the bearish pattern is confirmed by the downtrend. Weaker Signals: Colored entry candles that do not receive an "L" or "S" label suggest a counter-trend setup. These should be traded with increased caution and may require additional confirmation. Context: Use the EMA and SMA lines as general indicators for the current market sentiment and as dynamic support or resistance zones. Customization Options You can configure nearly everything in the settings menu: Toggle Signals On/Off: Independently enable or disable the reversal coloring and the "L/S" labels. Customize Colors: Change the colors for setup, entry, and text elements. Adjust L/S Label Size: Choose from five different sizes (from tiny to huge) to optimize the display. Modify Moving Averages: Change the period length of the EMA and SMA or hide them completely. Disclaimer This indicator is for informational and educational purposes only and does not constitute financial advice. Always make trading decisions based on comprehensive analysis and solid risk management. Backtesting and paper trading are strongly recommended before deploying any strategy with real capital.
Pine Script® indicator
by Innotrade_AJ
EMA Curl Strength+EMA Curl Strength+ Description: This indicator provides a statistically normalized view of EMA slope momentum using Z-score transformation. By evaluating the rate of change of an EMA and comparing it against its historical behavior, the script highlights momentum shifts in a dynamic, adaptive way. ⸻ How It Works: • Calculates the slope (percentage change) of a chosen EMA. • Normalizes the slope using Z-score over a custom lookback period. • Smooths the resulting signal and computes two signal lines for comparison. • Assigns dynamic colors based on user-defined Z-score thresholds for mild, moderate, and strong momentum in both directions. ⸻ Visual Features: • Gradient fill between the Z Curl Line and Signal 1 to highlight slope acceleration. • Histogram showing the difference between the Z Curl Line and its signal. • Optional signal crossover shapes between configurable pairs (e.g., Z Curl vs. Signal). • Background highlights when the Z Curl Line exceeds ±2, indicating strong trending behavior. ⸻ Customization: • Adjustable EMA length, smoothing lengths, signal lengths, histogram smoothing, and Z-score lookback. • Separate color controls for: • Z-score strength bands (mild/moderate/strong up/down) • Histogram bars • Signal lines • Background highlight zones • Crossover shapes ⸻ Use Cases: • Momentum Confirmation: Confirm strength when Z Curl exceeds ±2 with matching background highlights. • Trend Entry Timing: Look for trades when Z Curl crosses above or below the 0-line. • Scalping: Capture quick directional moves when momentum accelerates. • Trend Following: Use strong Z Curl values to confirm trade direction and filter sideways action. • Divergence Detection: Spot divergences between price and Z Curl movement to anticipate reversals.
Pine Script® indicator
by jrp320
DTC - Dream Trading ClubDTC - Dream Trading Club Indicator The DTC - Dream Trading Club is a multi-timeframe trend-following indicator designed to help traders identify high-probability buy and sell opportunities. It combines a structured EMA-based trend detection system with dynamic entry, take-profit, and stop-loss levels, all displayed directly on the chart. Core Features EMA-Based Trend Detection using 6 EMAs (30–60) Automatic Buy/Sell Signal Generation based on trend shifts Dynamic TP/SL Levels with clear visual labels Multi-Timeframe Trend Dashboard (1H, 4H, Daily) Unrealized PnL Tracker assuming 10x leverage User Guide: TP, SL, and Entry Signals 1. Entry Signal: A "LONG" or "SHORT" label appears when a clear trend reversal is detected using the EMAs. The entry is taken at the close of the signal candle. 2. Stop-Loss (SL): The stop-loss is calculated based on price structure: For LONG positions, SL is set to the lowest low of recent candles (based on selected "Length" setting). For SHORT positions, SL is set to the highest high of recent candles. The SL adapts to market volatility via the Tiny, Small, Mid, or Large lookback settings. 3. Take-Profit (TP): The indicator generates 5 take-profit levels using multiples of the calculated risk (Entry - SL distance): TP1 = Entry ± 1x Risk TP2 = Entry ± 2x Risk TP3 = Entry ± 3x Risk TP4 = Entry ± 4x Risk TP5 = Entry ± 5x Risk These levels allow for strategic scaling out or partial profit-taking based on personal trade management preferences. How the EMA Logic Works This indicator uses six Exponential Moving Averages (EMAs): 30, 35, 40, 45, 50, and 60 periods. A trend is considered: Bullish when the EMAs are stacked in ascending order (shorter EMAs above longer ones) Bearish when they are stacked in descending order In addition, the indicator pulls EMA data from three higher timeframes (1H, 4H, and 1D) and compares the fast and slow EMAs to determine broader market direction. This helps filter signals and identify confluence across timeframes.
Pine Script® indicator
by DTC_TRADING_CLUB01
6