Get started

Moving Averages

UM Nadaraya-Watson OscillatorDescription This is a different take on the Nadaraya-Watson Estimator from both Jdhorty and LuxAlgo. Both great scripts, I encourage everyone to check them out. Think of this script as a measure of trend direction, direction change, and trend acceleration or deceleration. It is not a Moving Average, but you could think of it as loosely as an intelligent adaptive regression curve with the focus on trend direction. The Gaussian calculations prefer and add more weight to the most recent bars. The end result is the oscillator is more responsive with less lag and less prone to pure price noise. How it Works The indicator was added to the chart twice; once with an MA, once without. The oscillator indicates trend change by crossing up through the zero line or down through the zero line. Once the indicator turns positive, we are in a positive trend until it crosses below zero and then the trend turns negative. I implemented a Moving Average overlay for additional signal determination; if the configured MA (EMA, SMA, WMA, or Nadaraya-Watson Estimator) trends higher, it is green. When trending down, it is red. The indicator also changes the color of the price bars; when the indicator below zero and red, the price bars are red. When the indicator is above zero and green, the price bars are green. I marked up the chart and indicator to identify LONG, SHORT, and divergences between price and oscillator. Default Settings The default settings are 16 for Bandwidth and a WMA with 110. This is shown in the chart example. There directional arrows, but they are off by default. The Price bars are colored green or red to match the oscillator and the bar coloring is on by default. All settings are user-configurable including bandwidth, MA type, MA length, bar coloring, and arrows. Suggested Settings and uses I personally like the 30 min chart with a bandwidth of 16 and a WMA of 110. The bandwidth 8 and 8 period EMA or WMA also work well on 6 hour and daily charts. Add this to your chart arsenal and use your favorite indicators for confirmation. This indicator works well on the 30 minute chart for inverse ETFs as well (SQQQ, SOXS, TZA). Also, the oscillator is good for identifying divergences between price and and indicator. (see chart for illustration) Experiment with settings and adapt them to your trading style. Alerts If you right click the indicator, and select add alert, I have configured 4 standard alerts: A bullish cross above zero, A bearish cross below zero, An MA bullish turned up to trend higher, (green), and an MA bearish turned down to trend lower (red).
Pine Script® indicator
by UnderwearMillionaire
4
Negative & Positive Divergence Alert System by TWTA"Negative & Positive Divergence Alert System by TWTA" is an advanced TradingView Pine Script indicator that detects bullish (positive) and bearish (negative) divergences on MACD (both classic and hidden/advanced forms), draws automatic support/resistance zones (SRv2), shows nearest S/R levels, 27-period EMA, volume filters, and gives real-time alerts + on-chart labels A-PD(Advanced Pozitive Divergence), B-PD(Base Pozitive Divergence), A-ND(Avanced Negative Divergence), B-ND(Base Negative Divergence).
Pine Script® indicator
by omurcypqrus
MA 9/21/50/100/200//@version=5 indicator("MA 9/21/50/100/200", overlay=true) ma9 = ta.sma(close, 9) ma21 = ta.sma(close, 21) ma50 = ta.sma(close, 50) ma100 = ta.sma(close, 100) ma200 = ta.sma(close, 200) plot(ma9, color=color.new(color.yellow, 0), title="MA 9") plot(ma21, color=color.new(color.orange, 0), title="MA 21") plot(ma50, color=color.new(color.blue, 0), title="MA 50") plot(ma100, color=color.new(color.green, 0), title="MA 100") plot(ma200, color=color.new(color.red, 0), title="MA 200")
Pine Script® indicator
by jishapatel62
EMA [Fax Academy]EMA is a refined, high-precision exponential moving average suite engineered for professional traders in Forex, metals (gold), indices, and crypto. Built for clarity, reliability, and structural market insight — without unnecessary complexity. Why This Indicator Institution-grade trend detection Dynamic support/resistance that adapts to volatility Optimized for execution, pullback entries, and structural clarity Zero repainting — all calculations use confirmed price data Minimalist by design — only essential EMAs are enabled to keep your chart clean Included EMA Levels A complete set of strategic EMAs tailored for intraday, swing, and long-term analysis. Toggle EMAs: 20 · 50 · 100 · 200 · 300 · 400 · 500 · 800 · 1000 Custom EMAs (4 Slots): User-defined range (1–1000) Individual ON/OFF switches Fully customizable colors and styling This design ensures flexibility for every strategy — from scalping to macro positioning. How to Use Add the indicator to your chart. Enable only the EMA levels relevant to your trading style. Use the custom EMA slots to tailor the indicator to your personal strategy. Adjust colors and thickness under Style for maximum clarity. The result: a clean, professional workspace tailored to your workflow. Recommended Setups (Forex / Gold) Intraday Momentum & Pullback EMA 20 – Short-term directional strength EMA 50 – Pullback structure and micro-trend filter EMA 200 – Higher-timeframe trend bias (above = bullish, below = bearish) Swing & Position Trading EMA 50 + 200 – Classic trend structure Add EMA 100 – Dynamic mid-term support/resistance Macro Trend & Regime Analysis EMA 300 / 400 / 500 / 800 / 1000 Reveal long-cycle trend behavior and institutional structure — ideal for gold and indices How to Interpret EMAs Trend Guidance: slope and price positioning Dynamic Levels: reactions around EMA 20/50 indicate continuation or slowdown Major Pullbacks: EMA 100/200 define deeper structural retests Confluence Zones: clusters of EMAs highlight high-probability decision points This indicator is built to help you see structure, not noise. Default Settings EMA 100 → Enabled (balanced mid-term anchor) All other levels → Disabled (activate only what you need) Colors optimized for clarity and easily editable Additional Notes Works seamlessly on all instruments and timeframes Fast and lightweight, engineered for real-time decision-making Non-repainting and built with efficient logic Ideal for professional traders who prioritize structure and simplicity Brand Statement Designed by Fax Academy, this indicator reflects a commitment to precision, clarity, and professional-grade tools. It is intended for educational and analytical use only — always combine with proven risk management.
Pine Script® indicator
by faxacademy
Multi-Timeframe EMA & SMA Scanner - Price Level LabelsOverview A powerful multi-timeframe moving average scanner that displays EMA and SMA levels from up to 8 different timeframes simultaneously on your chart. Perfect for identifying key support/resistance levels, confluence zones, and multi-timeframe trend analysis. Key Features 📊 Multi-Timeframe Analysis Monitor up to 8 different timeframes simultaneously (5m, 10m, 15m, 30m, 1H, 4H, 1D, 1W) Each timeframe can be independently enabled/disabled Fully customizable timeframe selection 📈 Comprehensive Moving Averages 5 configurable EMA periods (default: 8, 21, 50, 100, 200) 2 configurable SMA periods (default: 200, 400) All periods are fully customizable to match your trading strategy 🎯 Smart Price Level Labels Labels positioned at actual price levels (not in a list) Color-coded labels for easy identification Dynamic text color: Green when price is above, Red when below Compact notation: E8-5m means EMA 8 on 5-minute timeframe Adjustable label offset from current price 📉 Optional Horizontal Lines Dotted reference lines at each MA level Color-matched to corresponding MA type Can be toggled on/off independently 📋 Comprehensive Data Table Shows all MA values organized by timeframe Displays percentage distance from current price Trend indicator (Strong Up/Up/Neutral/Down/Strong Down) EMA alignment status (Bullish/Bearish/Mixed) Color-coded cells for quick visual analysis 🎨 Full Customization Individual color settings for each MA type Adjustable table size (Tiny/Small/Normal/Large) Choose table position (Left/Right) Toggle any MA or timeframe on/off 🔔 Built-in Alerts Golden Cross detection (EMA 50 crosses above EMA 200) Death Cross detection (EMA 50 crosses below EMA 200) Price crossing major EMAs Available for multiple timeframes How to Use For Day Traders: Enable lower timeframes (5m, 10m, 15m, 30m) Focus on faster EMAs (8, 21, 50) Watch for confluence zones where multiple timeframe MAs cluster For Swing Traders: Enable higher timeframes (1H, 4H, 1D) Use all EMAs plus SMAs for broader perspective Look for alignment across timeframes for high-probability setups For Position Traders: Focus on daily and weekly timeframes Emphasize 100, 200 EMAs and 200, 400 SMAs Use for long-term trend confirmation Understanding the Labels Label Format: E8-5m 45250.50 E8 = EMA with period 8 5m = 5-minute timeframe 45250.50 = Current price level Green text = Price is currently above this level (potential support) Red text = Price is currently below this level (potential resistance) For SMAs: S200-1D 44500.00 S200 = SMA with period 200 1D = Daily timeframe Trading Applications Support/Resistance Identification MAs act as dynamic support and resistance levels Multiple timeframe MAs create stronger zones Confluence Trading When multiple MAs from different timeframes cluster together, it creates high-probability zones These areas often result in strong reactions Trend Analysis Check the Alignment column: Bullish alignment = all EMAs in ascending order Trend column shows overall price position relative to all MAs Entry/Exit Timing Use lower timeframe MAs for precise entries Use higher timeframe MAs for trend direction and exits Settings Guide Timeframes Section: Select and enable/disable up to 8 timeframes Default: 5m, 10m, 15m, 30m, 1H, 4H, 1D, 1W MA Periods Section: Customize all EMA and SMA periods Default EMAs: 8, 21, 50, 100, 200 Default SMAs: 200, 400 Display Section: Toggle price labels and horizontal lines Adjust label offset (distance from right edge) Show/hide data table Choose table position and size Colors Section: Customize colors for each MA type Each MA has independent color control Pro Tips ✅ Start with default settings and adjust based on your trading style ✅ Disable timeframes/MAs you don't use to reduce chart clutter ✅ Use the data table for quick overview, labels for precise levels ✅ Look for "confluence clusters" where multiple MAs from different timeframes align ✅ Green labels = potential support, Red labels = potential resistance ✅ Set alerts on key crossovers for automated notifications Technical Specifications Pine Script v6 Overlay indicator (displays on main chart) Maximum 500 labels supported Real-time updates on each bar close Compatible with all instruments and timeframes Perfect For: Day traders seeking multi-timeframe confirmation Swing traders looking for high-probability setups Position traders monitoring long-term trends Anyone using moving averages as part of their strategy Note: This indicator does not provide buy/sell signals. It's a tool for analysis and should be used in conjunction with your trading strategy and risk management rules.
Pine Script® indicator
by kariyappavinay
PRO Triple+ Confirmation Overlay SignalsThis script uses the 200 SMA + RSI + MACD confirmations as buy and sell signals. It only give a signal if all three line up. works well for general market direction signals. It also has a higher time frame filter that will filter out 70%-90% of traps and counter trend signals. MACD momentum trigger times entries with momentum shifts. RSI confirmation as well as volume confirmation to remove entries in low volume dead markets.
Pine Script® indicator
by ryanpaget13
EMA 7/21 + SuperTrend DEFINITIVOhe Ultimate 7/21 Signal: Trend-Filtered by Supertrend 🚀Tired of signals that trade against the main trend? This powerful indicator features the 7/21 EMA Crossover as its core signal, but with a massive upgrade in confirmation:Trend Alignment: Only signals that move in the direction of the Supertrend are confirmed, drastically reducing false entries.Momentum Filter: The ADX DI ensures the move has directional strength.Conviction Check: A Volume Filter validates the signal with market participation.This multi-stage filter provides clean, high-conviction signals for the $7/21$ strategy. The intuitive Informative Panel clearly shows when all conditions are met for a BUY or SELL.Trade with the trend. Trade with conviction.
Pine Script® indicator
by acgcapital
paigep.llc - SuperMASuperMA is a multi-layered moving-average and candle-coloring system that combines SMA, EMA, and optional HMA logic to help traders visualize trend shifts, pullbacks, and momentum changes in a clean, structured way. The script includes multiple modules: trend-based moving averages, pullback signals, exit logic, and an optional HMA cross engine. 📌 Core Features 1. Full SMA + EMA Framework The indicator plots multiple moving averages (8, 9, 13, 20, 50, 200) using both SMA and EMA calculations. Each line automatically colors bullish or bearish based on its relationship to the 200-period baseline.Users can toggle SMAs and EMAs independently for clearer chart control. 2. Main Trend Entry & Exit Logic (8×200 and 8×20) Built-in crossover logic detects: Main Entry: SMA 8 crossing above/below EMA 200 Main Exit: SMA 8 and SMA 20 cross (with an option to choose which SMA is treated as the “fast” leg) A “first exit only” option allows the script to ignore additional exit signals until a new trend regime begins. 3. Pullback Module (20 SMA Interaction) Pullback entries and exits occur when price crosses the 20 SMA during existing trend conditions. This includes: Pullback entries through the 20 SMA Pullback exits back across the 20 SMA Labels and candle colors are available for all pullback events. 4. Optional HMA Cross Module A separate module allows traders to use two Hull Moving Averages (HMA) with customizable: Lengths Independent timeframes Line colors Cross-based entries and exits This module has its own events, labels, and optional candle coloring. 5. Advanced Candle Coloring System Candle coloring is layered in priority order, based on: Main trend entries Main exits HMA entries HMA exits Pullback entries Pullback exits Trend-only candles (based on SMA 8 relative to EMA 200) Users may also independently color wicks and borders. 6. Configurable Alerts (Fully Decoupled from Visuals) Alerts are available for all major events, including: Main Entries (8×200) Main Exits (8×20) Pullback Entries and Exits HMA Entries and Exits Bull or Bear Trend candles Any colored candle event Alerts can fire on bar close only or intrabar, depending on user preference. 📌 Use Cases SuperMA helps traders visualize: Trend direction using SMA/EMA structure Momentum shifts through HMA crosses Pullback zones around the 20 SMA Early regime transitions based on the 8×200 relationship Candle-level context through color-coded bars The indicator works across all markets and timeframes. ⚠️ Note This tool is for visual and analytical assistance only. It does not guarantee future performance and should be combined with additional analysis and risk management.
Pine Script® indicator
by paigepllc
EMA 7/21 + SuperTrend INDICADOR CREADO PARA MI ESTRATEGIA That sounds like a complex and multi-layered trading indicator you've developed! Combining an Exponential Moving Average (EMA) crossover with an Average Directional Index (ADX) filter, a Volume filter, and a Supertrend for overall trend confirmation can certainly help to filter out false signals and potentially increase the reliability of your entry and exit points.Here's a breakdown of the components you're using and why this combination can be powerful:📊 Indicator Components and Their Roles1. 7/21 EMA Crossover (Signal Generator)The $7$-period EMA and $21$-period EMA crossover is a common strategy used to generate initial buy or sell signals.Buy Signal: The short-term EMA (7) crosses above the long-term EMA (21).Sell Signal: The short-term EMA (7) crosses below the long-term EMA (21).2. ADX DI Filter (Momentum and Direction)The Average Directional Index (ADX) and its directional indicators ($+DI$ and $-DI$) are key to confirming the strength and direction of the move.Directional Confirmation: The EMA crossover must be confirmed by the appropriate directional index. For a buy, the $+DI$ should be above the $-DI$. For a sell, the $-DI$ should be above the $+DI$.Trend Strength ( NYSE:ADX $): A rising NYSE:ADX $ (typically above 20 or 25) suggests the current trend has sufficient momentum, making the signal more reliable.3. Volume Filter (Conviction)Adding a Volume filter ensures that the price movement accompanying the EMA crossover is supported by significant trading activity.Confirmation: A strong signal (buy or sell) is often accompanied by above-average volume. This suggests that market participants are actively supporting the move, adding conviction to the trade.4. Supertrend (Overall Trend Confirmation)The Supertrend indicator is based on the Average True Range (ATR) and is excellent for identifying the dominant market trend.Trend Alignment: The EMA crossover signal should align with the Supertrend's current signal. For a buy signal, the price should be above the Supertrend line (green). For a sell signal, the price should be below the Supertrend line (red). This helps ensure you are trading with the prevailing trend.📈 Why This is a Powerful CombinationYour indicator is essentially a multi-stage confirmation system:Speed (7/21 EMA): Generates a fast, responsive signal.Momentum (ADX DI): Confirms the direction and strength of the signal.Conviction (Volume): Validates the signal with market participation.Safety/Trend (Supertrend): Ensures the trade is in the direction of the long-term trend.The Informative Panel is a great feature, as it simplifies the decision-making process by summarizing the findings of all these components—e.g., "BUY: EMA Crossover $\checkmark$, +DI > -DI $\checkmark$, High Volume $\checkmark$, Supertrend Green $\checkmark$."💡 Next Steps for RefinementTo finalize and test this indicator, you may want to consider:Parameter Optimization: The best settings for the ADX level (e.g., 20 vs. 25) and the Supertrend ATR parameters may need to be optimized for the specific asset (e.g., stocks, forex) and timeframe you are using.Exit Strategy: Since this primarily focuses on entries, define clear Stop-Loss (perhaps based on the Supertrend line or a recent swing low/high) and Take-Profit (e.g., a fixed Risk/Reward ratio or previous resistance/support levels) rules.Would you like to explore specific parameters for any of these components or look into ways to backtest your strategy?
Pine Script® indicator
by acgcapital
paigep.llc - SuperMA SuperMA is a multi-layered moving-average and candle-coloring system that combines SMA, EMA, and optional HMA logic to help traders visualize trend shifts, pullbacks, and momentum changes in a clean, structured way. The script includes multiple modules: trend-based moving averages, pullback signals, exit logic, and an optional HMA cross engine. 📌 Core Features 1. Full SMA + EMA Framework The indicator plots multiple moving averages (8, 9, 13, 20, 50, 200) using both SMA and EMA calculations. Each line automatically colors bullish or bearish based on its relationship to the 200-period baseline. Users can toggle SMAs and EMAs independently for clearer chart control. 2. Main Trend Entry & Exit Logic (8×200 and 8×20) Built-in crossover logic detects: Main Entry: SMA 8 crossing above/below EMA 200 Main Exit: SMA 8 and SMA 20 cross (with an option to choose which SMA is treated as the “fast” leg) A “first exit only” option allows the script to ignore additional exit signals until a new trend regime begins. 3. Pullback Module (20 SMA Interaction) Pullback entries and exits occur when price crosses the 20 SMA during existing trend conditions. This includes: Pullback entries through the 20 SMA Pullback exits back across the 20 SMA Labels and candle colors are available for all pullback events. 4. Optional HMA Cross Module A separate module allows traders to use two Hull Moving Averages (HMA) with customizable: Lengths Independent timeframes Line colors Cross-based entries and exits This module has its own events, labels, and optional candle coloring. 5. Advanced Candle Coloring System Candle coloring is layered in priority order, based on: Main trend entries Main exits HMA entries HMA exits Pullback entries Pullback exits Trend-only candles (based on SMA 8 relative to EMA 200) Users may also independently color wicks and borders. 6. Configurable Alerts (Fully Decoupled from Visuals) Alerts are available for all major events, including: Main Entries (8×200) Main Exits (8×20) Pullback Entries and Exits HMA Entries and Exits Bull or Bear Trend candles Any colored candle event Alerts can fire on bar close only or intrabar, depending on user preference. Use Cases SuperMA helps traders visualize: Trend direction using SMA/EMA structure Momentum shifts through HMA crosses Pullback zones around the 20 SMA Early regime transitions based on the 8×200 relationship Candle-level context through color-coded bars The indicator works across all markets and timeframes. ⚠️ Note This tool is for visual and analytical assistance only. It does not guarantee future performance and should be combined with additional analysis and risk management.
Pine Script® indicator
by paigepllc
1
QuantMotions - TPR Sentinel LineTPR Sentinel Line is an advanced adaptive Support/Resistance system that combines multi-layered trend analysis with a directional Time-Price Ratio (TPR) engine. The indicator dynamically builds a stabilized support or resistance line that adjusts to market volatility, trend strength, ATR expansion and contraction, and real-time slope changes. This creates a high-precision, self-adjusting trend barrier that acts as support in uptrends, resistance in downtrends, and a neutral anchor during sideways phases. Key Features ✔ Adaptive Trend Base - A composite trend model blending: - Kijun-style midpoint - Donchian midline - SMA & EMA smoothing This creates a stable baseline that reacts smoothly but reliably to structural trend shifts. ✔ Directional TPR Calculation The indicator measures slope across short, medium, and long trend windows, normalizes it with ATR, and determines: - Trend direction - Trend strength - Momentum quality ✔ Dynamic Support/Resistance Line Depending on trend direction: - In uptrends → the line becomes adaptive support - In downtrends → the line becomes adaptive resistance - In neutral phases → the line centers around the smoothed trend base A built-in lag factor prevents unrealistic jumps and keeps the level stable. ✔ Automatic Support/Resistance Zones The indicator expands the main line into upper and lower zones based on ATR and trend strength, creating a dynamic volatility envelope around the trend structure. ✔ Signals & Alerts - Support bounce - Resistance rejection - Breakouts above/below the dynamic line These events help identify high-probability continuation or reversal moments. ✔ Information Panel A real-time status table displays: - Trend direction - Trend strength - Current S/R level 🎯 Ideal For - Precision entries on pullbacks - Detecting trend shifts earlier - Identifying strong or weak trend phases - Adaptive take-profit and stop-loss zones - Filtering false breakouts 💡 Summary TPR Sentinel Line gives you a living, breathing support/resistance structure that evolves with the market. Instead of relying on static levels, you get a continuously adapting trend barrier that reflects real strength, real volatility, and real momentum. A powerful tool for traders who want structure, clarity, and trend confidence.
Pine Script® indicator
by Trading-Programmer
[iQ]PRO Engineering42+🔬 PRO Engineering42+ ⚙️ The Next Evolution in Signal Processing for Precision Market Analysis Introducing PRO Engineering42+, a proprietary, cutting-edge technical analysis tool engineered to distill meaningful market structure from the inherent noise of price action. This indicator is built upon a sophisticated, multi-stage signal processing framework, leveraging advanced mathematics to provide traders with a uniquely clarified view of the underlying market trend and momentum. Hybrid Composite Signal Generation At its core, PRO Engineering42+ begins with a Hybrid Base Signal. This signal is not a mere average but a intelligently weighted composite, harmonizing the strengths of multiple distinct, adaptive moving average techniques. This fusion is designed to achieve a superior balance of responsiveness to trend shifts and smoothness for noise rejection, establishing a foundation of dynamic market memory. Adaptive Volatility Clamping The initial Hybrid Base is then subjected to an innovative process we term Adaptive Volatility Clamping. This critical step dynamically adjusts the signal's sensitivity in real-time based on the market's current volatility profile (measured using True Range), ensuring the signal remains tightly coupled with price action during quiet periods while minimizing whipsaws and overshoots during high-volatility events. This is achieved through a precise, weighted mechanism that prioritizes price context. Proprietary Spectral Filtration and Gating The hallmark of PRO Engineering42+ is its final stage: Advanced Frequency Domain Analysis using a proprietary Fast Fourier Transform (FFT) filter. Frequency Isolation: The tool mathematically decomposes the pre-processed (clamped) signal into its constituent frequencies (or periodic cycles). Traders can isolate and focus on a specific, tunable bandwidth (FFT Low/High Freq) that represents the most relevant market cycles for their trading style, effectively filtering out disruptive high-frequency noise and irrelevant, extremely low-frequency components. Intelligent Spectral Gating: This feature introduces a proprietary, volatility-aware thresholding mechanism (Spectral Gating Level). The filter actively assesses the power spectrum of the decomposed signal, only allowing frequencies with power exceeding a dynamically calculated standard deviation level to pass through. This unique "gate" intelligently suppresses less significant cycles, leaving only the statistically dominant, market-driving components to form the final output, resulting in an exceptionally clean and responsive oscillator. The result is a powerful, low-lag Hybrid FFT Oscillator that provides an unparalleled measure of directional bias and momentum. Key Features for Exclusive Members Closed Source & Invite Only: The underlying Pine Script logic, including the proprietary spectral gating calculation and hybrid weighting methodology, is intentionally obscured and available exclusively to a select group of paying members. Maximum Data Efficiency: Optimized with a low max_bars_back and robust dependency structure to ensure maximum calculation efficiency. Precision Control: Fine-tune the system's performance using controls like Hybrid Base Length, FFT Window Size, and the Spectral Gating Level to perfectly match any asset, timeframe, and trading strategy. Experience the future of analytical precision. This is not just an indicator; it is a proprietary engineering solution for market mastery.
Pine Script® indicator
by MarketMakerlQ
Adaptive ATR% Grid + SuperTrend + OrderFlipDescription: This indicator combines multiple technical analysis tools to identify key price levels and trading signals: ATR% Grid – automatic plotting of support and resistance levels based on current price and volatility (ATR). Useful for identifying potential targets and entry/exit zones. SuperTrend – a classic trend indicator with an adaptive ATR multiplier that adjusts based on average volatility. OrderFlip – identifies price reversal points relative to a moving average with ATR-based sensitivity, optionally filtered by OBV and DMI. MTF Confirmation – multi-timeframe trend verification using EMA to reduce false signals. Signal Labels – "LONG" and "SHORT" labels appear on the chart with an offset from the price for better visibility. JSON Alerts – ready-to-use format for automated alerts, including price, SuperTrend direction, Fair Zone, and ATR%. Features: Fully compatible with Pine Script v6 Lines and signals are fixed on the chart, do not shift with new bars Configurable grid, ATR, SuperTrend, and filter parameters Works with MTF analysis and classic indicators (OBV/DMI) Usage: Best used with additional indicators and risk management strategies. ATR% Grid is ideal for both positional trading and intraday setups. перевод на русский Описание: Этот индикатор объединяет несколько методов технического анализа для выявления ключевых уровней цены и сигналов на покупку/продажу: Сетка ATR% (ATR% Grid) – автоматическое построение уровней поддержки и сопротивления на основе текущей цены и волатильности (ATR). Позволяет видеть потенциальные цели и зоны входа/выхода. SuperTrend – классический трендовый индикатор с адаптивным множителем ATR, который корректируется на основе средней волатильности. OrderFlip – определение моментов разворота цены относительно скользящей средней с учетом ATR, с возможностью фильтрации по OBV и DMI. MTF-подтверждение – проверка направления тренда на нескольких таймфреймах с помощью EMA, чтобы снизить ложные сигналы. Сигнальные метки – на графике появляются "LONG" и "SHORT" с отступом от цены для наглядности. JSON Alerts – готовый формат для автоматических уведомлений, включающий цену, направление SuperTrend, Fair Zone и ATR%. Особенности: Поддержка Pine Script v6 Линии и сигналы закреплены на графике, не двигаются при обновлении свечей Настраиваемые параметры сетки, ATR, SuperTrend и фильтров Совместимость с MTF-анализом и классическими индикаторами OBV/DMI Рекомендации: Используйте в сочетании с другими индикаторами и стратегиями управления риском. Сетка ATR% отлично подходит для позиционной торговли и интрадей. ATR% Grid – automatic plotting of support and resistance levels based on current price and volatility (ATR). Useful for identifying potential targets and entry/exit zones. SuperTrend – a classic trend indicator with an adaptive ATR multiplier that adjusts based on average volatility.
Pine Script® indicator
by indexrate
Fibonacci Retrace + 50 EMA Hariss 369This indicator combines 3 concepts: Fibonacci retracement zones 50 EMA trend filter Price interaction with specific Fib zones to generate Buy/Sell signals Let’s break everything down in simple language. 1. Fibonacci Retracement Logic The script finds: Most recent swing high Most recent swing low Using these two points, it draws Fibonacci levels: Fibonacci Levels Used Level Meaning Calculation 0% Swing Low recentLow 38.2% Light retracement high - (range × 0.382) 50% Mid retracement high - (range × 0.50) 61.8% Deep retracement high - (range × 0.618) 100% Swing High recentHigh 🔍 Why only these levels? Because trading signals are generated based ONLY on:38.2%, 50%,61.8% These 3 levels define the golden retracement zones. 2. Trend Filter — 50 EMA A powerful rule: Trend Up (bullish) ➡️ Price > 50 EMA Trend Down (bearish) ➡️ Price < 50 EMA This prevents signals against the main trend. 3. BUY Conditions (Retracement + EMA) A BUY signal appears when: Price is above the 50 EMA (trend is up) Price retraces into the BUY ZONE: 🔵 BUY ZONE = between 50% and 38.2% Fibonacci i.e.,close >= Fib50 AND close <= Fib38.2 This means: Market is trending up Price corrected to a healthy retracement level Buyers are stepping back in 📘 Why this zone? This is a moderate retracement (not too shallow, not too deep). Smart money often enters at 38.2%–50% in a strong trend. 📘 BUY Signal Appears With: Green “BUY” label Green arrow below the candle 4. SELL Conditions (Retracement + EMA) A SELL signal appears when: Price is below the 50 EMA (trend is down) Price retraces upward into the SELL ZONE: 🔴 SELL ZONE = between 50% and 61.8% Fibonacci i.e.,close <= Fib50 AND close >= Fib61.8 This means: Market is trending down Price made a pullback Sellers regain control in the golden zone 📘 Why this zone? 50–61.8 retracement is the ideal bearish pullback level. 📘 SELL Signal Appears With: Red “SELL” label Red arrow above the candle 5. STOP-LOSS (SL) RULES For BUY trades, Place SL below 61.8% level.SL = Fib 61.8% OR more safe:SL = swing low (Fib 0%) For SELL trades Place SL above 38.2% level.SL = Fib 38.2% OR conservative: SL = swing high (Fib 100%) 6. TAKE-PROFIT (TP) RULES Based on common Fibonacci extensions. BUY Trade TP Options TP Level Meaning TP1 Return to 38.2% Quick scalping target TP2 Return to swing high Full trend target TP3 Breakout above swing high Trend continuation Practical suggestion: TP1 = 1× risk TP2 = 2× risk TP3 = trailing stop SELL Trade TP Options TP Level Meaning TP1 Return to 61.8% Moderate bounce TP2 Return to swing low Trend target TP3 Break below swing low Trend continuation 7. Recommended Trading Plan (Simple) BUY PLAN Price > 50 EMA (uptrend) Enter at BUY signal in 38.2–50% zone SL at 61.8% TP at swing high or structure break SELL PLAN Price < 50 EMA (downtrend) Enter at SELL signal in 50–61.8% zone SL above 38.2% TP at swing low 🟩 Summary (Very Easy to Remember) 🔵 BUY Trend: above 50 EMA Zone: between 50% and 38.2% SL: below 61.8% TP: swing high 🔴 SELL Trend: below 50 EMA Zone: between 50% and 61.8% SL: above 38.2% TP: swing low
Pine Script® indicator
by Hariss369
Multi MAThis TradingView indicator displays four customizable moving averages on your price chart: two Exponential Moving Averages (EMAs) and two Simple Moving Averages (SMAs). The default settings show a 10-period EMA (aqua), 21-period EMA (orange), 50-period SMA (green), and 200-period SMA (red), which are commonly used timeframes for trend analysis. Each moving average can be individually toggled on or off, and their lengths and colors are fully adjustable through the indicator settings. The EMAs react more quickly to price changes while the SMAs provide smoother, more gradual trend indicators, making this useful for identifying support/resistance levels and trend direction. Traders often watch for crossovers between these moving averages as potential entry or exit signals, with the 50/200 SMA cross being particularly significant as the "golden cross" or "death cross."
Pine Script® indicator
by OneMorningStar1