Get started

Moving Averages

Long Only - Double EMA + SessionOverview This is a high-probability Long-Only trend-following strategy designed primarily for the 65-minute and 4-hour timeframes. It utilizes a dual-layered filter system to align trades with both macro and mid-term market momentum, ensuring entries only occur during healthy uptrends. The strategy is optimized for volatile, high-growth assets like TSLA and MSFT. How It Works The strategy relies on three primary pillars of technical analysis to confirm an "A+" setup: Macro Trend Filter (200 EMA): We only look for long opportunities when the price is above the 200-period Exponential Moving Average. This keeps the strategy on the right side of the long-term trend and avoids "buying the dip" during major bear markets. Momentum Filter (50 EMA): The 50 EMA acts as a local trend filter. By requiring price to be above both EMAs, we ensure the medium-term momentum is also bullish. The Trigger (Stochastic RSI): We enter when the Stochastic RSI K-line crosses above the 20 level (Oversold). This identifies local "oversold" pullbacks within a larger uptrend. Risk Management & Exit Plan This strategy is built with professional-grade capital preservation in mind: Trailing Stop-Loss: A 5% trailing stop follows the price as it moves in our favor. This protects unrealized profits and helps mitigate the drawdown during sudden reversals. Dynamic Profit Target: The strategy exits automatically if the Stochastic RSI K-line reaches the 97 level, capturing gains at the peak of momentum. Session Filter: To avoid the "noise" of pre-market and low-volume afternoon trading, the strategy is restricted to the Market Open (9:30 AM EST) window where institutional volume is highest. Backtesting Notes Realistic Simulation: This strategy includes a 0.05% commission and 2 ticks of slippage to reflect real-world execution costs. Recommended Assets: Optimized for Nasdaq-100 components and high-volume growth stocks. Timeframe: Best performance found on 65m or 4h intervals.
Pine Script® strategy
by suddenSeahorse88500
TWR of Bill WilliamsThis indicator was taken from the book “Trading Chaos Pt 1” by Bill Williams. TWR contains 3 Moving Averages Ripple - MA with 5 bars length Wave - MA with 13 bars length Tide - MA with 34 bars length According to Bill Williams, you should take only a long position if the Ripple(5 bars length) is higher than Wave(13) and Tide(34). Also, you should take only a short position, if the Ripple (the fastest MA) is lower than Wave MA and Tide MA(slowest MA). This indicator is also used if you want to fill in the Profitunity Trading Partner table.
Pine Script® indicator
by vildstein
Delta/Volume Bubble Strategy [Quant Z-Score] Maxxed VersionDelta/Volume Bubble Signals Maxxed Verison This indicator combines advanced volume delta analysis with smart filtering to generate high-conviction intraday signals on futures like YM, ES, and NQ (5-minute charts perform particularly well in testing). Special thanks to L&L Capital for the LNL Trend System, which provides the excellent dynamic chop detection and cloud visuals used here. A very BIG thanks to tncylyv for the original volume delta bubble script — its Z-score normalization on extreme volume/delta is the foundation of the core detection logic.This entire system is now possible thanks to TradingView's addition of Volume Delta data in the Footprint chart, allowing accurate lower-timeframe delta aggregation without external feeds. Core Concept the indicator identifies extreme volume/delta spikes — moments when significant buying or selling pressure appears — and only signals when multiple confluence filters align. This results in lower-frequency, higher-quality trades that aim to capture institutional momentum while avoiding noise. How It Works — Key Components Volume Delta Detection (The Heart of the System) Uses TradingView's built-in footprint delta (aggregated from lower TF, default 1-second bars). Calculates absolute delta and applies a rolling Z-score (default lookback 60 bars) to normalize extremes across different volatility regimes and instruments. Bubbles visualize spikes above threshold (default 1.7σ). BUY/SELL signals require the same threshold plus additional filters. Absorption Filter (Enabled by Default) Detects high volume/delta with minimal price movement ("effort vs result" failure = trapped traders). Purple glow on bubbles + optional alert. Signals are suppressed on absorption bars to avoid counter-trend traps. Trend Filter (Nadaraya-Watson from jdehorty as default) Non-repainting kernel regression line for smooth, adaptive trend following. Signals only fire when price is on the correct side of the trend line (above for longs, below for shorts). Can be disabled or switched to EMA/WMA/KAMA. LNL Chop Filter (Tight Mode by Default) Dynamic ATR-based stop zones from L&L's system. When stop levels appear on both sides of price = sideways/chop (no-go zone). Signals completely suppressed during chop. Usage Tips Best on intraday futures (YM 5-min has shown strong results in testing). Defaults are tuned for balance: 1.7σ threshold, Tight LNL mode, absorption on. Strategy version (separate script) adds LNL trailing stops for actual backtesting/exits. Customize freely — try different LNL modes (Net for wider range), trend types, or Z-thresholds. Also available the matching indicator by yours truly. Important: Forward Test Thoroughly This indicator was refined on historical data, so there's always risk of over-fitting. Always forward test on live or paper accounts for weeks/months before real capital: Validate across different market regimes (trending, ranging, high/low volatility). Compare out-of-sample periods. Adjust one parameter at a time and re-validate forward. Markets change — what worked yesterday may need tweaking tomorrow. Feel free to use, modify, and share. Good luck, and trade well! — Max
Pine Script® strategy
by Maximilianned
3
Delta/Volume Bubble Signals [Quant Z-Score] Maxxed Version Delta/Volume Bubble Signals Maxxed Verison This indicator combines advanced volume delta analysis with smart filtering to generate high-conviction intraday signals on futures like YM, ES, and NQ (5-minute charts perform particularly well in testing). Special thanks to L&L Capital for the LNL Trend System, which provides the excellent dynamic chop detection and cloud visuals used here. A very BIG thanks to tncylyv for the original volume delta bubble script — its Z-score normalization on extreme volume/delta is the foundation of the core detection logic.This entire system is now possible thanks to TradingView's addition of Volume Delta data in the Footprint chart, allowing accurate lower-timeframe delta aggregation without external feeds. Core Concept the indicator identifies extreme volume/delta spikes — moments when significant buying or selling pressure appears — and only signals when multiple confluence filters align. This results in lower-frequency, higher-quality trades that aim to capture institutional momentum while avoiding noise. How It Works — Key Components Volume Delta Detection (The Heart of the System) Uses TradingView's built-in footprint delta (aggregated from lower TF, default 1-second bars). Calculates absolute delta and applies a rolling Z-score (default lookback 60 bars) to normalize extremes across different volatility regimes and instruments. Bubbles visualize spikes above threshold (default 1.7σ). BUY/SELL signals require the same threshold plus additional filters. Absorption Filter (Enabled by Default) Detects high volume/delta with minimal price movement ("effort vs result" failure = trapped traders). Purple glow on bubbles + optional alert. Signals are suppressed on absorption bars to avoid counter-trend traps. Trend Filter (Nadaraya-Watson from jdehorty as default) Non-repainting kernel regression line for smooth, adaptive trend following. Signals only fire when price is on the correct side of the trend line (above for longs, below for shorts). Can be disabled or switched to EMA/WMA/KAMA. LNL Chop Filter (Tight Mode by Default) Dynamic ATR-based stop zones from L&L's system. When stop levels appear on both sides of price = sideways/chop (no-go zone). Signals completely suppressed during chop. Signals & Visuals BUY: Small blue "BUY" label below bar. SELL: Small red "SELL" label above bar. CLOSE LONG: Tiny dark grey "CLOSE" label above bar (on opposite SELL signal or stop hit). CLOSE SHORT: Tiny dark grey "CLOSE" label below bar (on opposite BUY signal or stop hit). No overlap — closes only appear on actual exit/reversal bars. Alerts (Fully Separate)Individual toggles for: BUY Signal SELL Signal CLOSE LONG (opposite SELL) CLOSE SHORT (opposite BUY) Absorption Detected Unusual Volume/Delta Usage Tips Best on intraday futures (YM 5-min has shown strong results in testing). Defaults are tuned for balance: 1.7σ threshold, Tight LNL mode, absorption on. Strategy version (separate script) adds LNL trailing stops for actual backtesting/exits. Customize freely — try different LNL modes (Net for wider range), trend types, or Z-thresholds. To backtest and optimize using the matching strategy which I created as well. Important: Forward Test Thoroughly This indicator was refined on historical data, so there's always risk of over-fitting. Always forward test on live or paper accounts for weeks/months before real capital: Validate across different market regimes (trending, ranging, high/low volatility). Compare out-of-sample periods. Adjust one parameter at a time and re-validate forward. Markets change — what worked yesterday may need tweaking tomorrow. Feel free to use, modify, and share. Good luck, and trade well! — Max
Pine Script® indicator
by Maximilianned
BTC 15m VWAP Structure Breakout [ALERT]BTC 15m VWAP Structure Breakout Strategy (Alert Only) This strategy is designed for BTC on the 15-minute timeframe. It focuses on identifying high-probability structural breakouts within an established trend, not predicting tops or bottoms. The script is alert-only. Entries are taken manually, based on confirmation after the alert. 🎯 Core Idea The main question this strategy answers is: “Is this breakout occurring with the trend, or is it just a fake move inside a ranging market?” To solve this, the strategy combines: VWAP (institutional average price) EMA20 (short-term trend filter) Market structure breakout 📈 Indicators Used VWAP (Volume Weighted Average Price) Represents the market’s fair value and institutional bias. EMA20 Defines short-term trend direction and momentum. Structure High / Low (last 25 candles) Identifies meaningful resistance and support levels. 🧭 Market Bias Filter 🔵 Bullish Bias (Long Setup Allowed) Price closes above VWAP EMA20 is rising (higher than 2 candles ago) This confirms a valid bullish environment before looking for breakouts. 🔴 Bearish Bias (Short Setup Allowed) Price closes below VWAP EMA20 is falling (lower than 2 candles ago) This confirms a valid bearish environment. 🚀 Breakout Signal Conditions ✅ Long Breakout Alert A LONG alert is triggered when all conditions are met: Bullish market bias Price closes above EMA20 Price breaks above the previous 25-candle high by at least 0.15% ➡️ This captures true continuation breakouts, not random spikes. ❌ Short Breakdown Alert A SHORT alert is triggered when all conditions are met: Bearish market bias Price closes below EMA20 Price breaks below the previous 25-candle low by at least 0.15% ➡️ This captures trend-aligned support breakdowns. 🔔 How to Use the Alerts (Important) These alerts are NOT automatic entry signals. When an alert fires, check: Volume expansion Breakout confirmation or pullback-and-reclaim Higher-timeframe trend alignment 👉 Alert = “Market is ready, pay attention” 🧠 Best Market Conditions ✔ Trending BTC markets ✔ Breakout or expansion phases ✔ Works in all sessions (no session filter) ❌ Choppy or low-volatility ranging markets 👍 Who This Strategy Is For Traders who can’t watch charts all day Traders who want to reduce emotional entries Traders who prefer probability and structure over prediction Manual traders using alerts as decision triggers 📌 Final Thoughts This strategy: ❌ does NOT try to catch bottoms or tops ✅ reacts only when structure confirms a real move Let the market show strength first — then decide how to trade it.
Pine Script® indicator
by Stockdale-Paradox
Enterprise Adaptive RSI WeightDescription (TradingView) Enterprise Adaptive RSI Weight is a clean, decision-support oscillator for XAUUSD & EURUSD (5m/15m). It converts RSI into a normalized Weight (W) and smooths it with a Hull Moving Average (yellow) to highlight trend bias + momentum shifts. What to watch W (main line) = bias & momentum (above 0 = bullish, below 0 = bearish) Yellow line (HMA) = signal filter CROSS (W ↔ HMA) = key confirmation point CROSS ↑ = bullish momentum confirmation CROSS ↓ = bearish momentum confirmation Built-in safety filters (enterprise-style) Signals are filtered by: Quality/Gate (model confidence) Dead Zone (avoids weak/noise signals) Optional HTF alignment (trade only when higher timeframe agrees) Visual markers L / S = entry triggers (valid cross + filters) XL / XS = momentum exit warnings 0↑ / 0↓ = bias flip (crossing the 0 line) REV = exit from extreme zones (OB/OS reversal hint) STR = strong trend condition How to use (simple workflow) Check STATE in the panel: trade only BULL or BEAR Enter on CROSS in the same direction Manage/exit on XL/XS or loss of momentum Tip: Best used as a confirmation tool, not as a standalone strategy.
Pine Script® indicator
by stoyan_valev
TurboRSI Pro [JOAT]TurboRSI Pro - Multi-Length RSI Ensemble with Dynamic Momentum Analysis Introduction TurboRSI Pro is an open-source indicator that reimagines the classic RSI by calculating multiple RSI lengths simultaneously and combining them into a single, more reliable momentum reading. Instead of relying on a single RSI period that may lag or produce false signals, this indicator creates an ensemble of RSI values across a configurable range, providing a smoother and more robust momentum assessment. The indicator is designed for traders who want deeper insight into momentum conditions without the noise that comes from single-period oscillators. Originality and Purpose This indicator is NOT a simple RSI with different settings. It is an original implementation that solves a fundamental problem with traditional RSI: The Problem with Single-Period RSI: Traditional RSI uses a single lookback period (typically 14). The issue is that different market conditions favor different RSI lengths. A 14-period RSI might work well in one market phase but produce false signals in another. There's no "perfect" RSI length that works in all conditions. The Multi-Length Solution: TurboRSI Pro calculates RSI across a range of lengths (default: 10 to 20) simultaneously, then averages all values to create a composite reading. This ensemble approach filters out period-specific noise while preserving genuine momentum shifts. When multiple RSI lengths agree, the signal is more reliable. OB/OS Strength Percentage: The indicator tracks how many individual RSI lengths are in overbought or oversold territory. When 100% of lengths are overbought, it's a much stronger signal than when only 50% are. This percentage-based approach is original to this indicator and provides conviction assessment. Candle Heatmap Innovation: An optional feature colors price bars based on deviation from a 200-bar linear regression line. This shows when price is statistically overextended (HOT/COLD) independent of RSI, providing another layer of analysis. How the components work together: Multi-length RSI ensemble provides a more robust momentum reading than single-period RSI OB/OS Strength percentages quantify how many timeframes agree on the momentum condition Dynamic channels expand/contract based on momentum strength across all calculated lengths Candle heatmap adds statistical price deviation context independent of RSI Core Concept: Multi-Length RSI Ensemble Traditional RSI uses a single lookback period (typically 14). The problem is that different market conditions favor different RSI lengths. TurboRSI Pro solves this by: Calculating RSI across a range of lengths (default: 10 to 20) Averaging all RSI values to create a composite reading Tracking how many individual RSI lengths are in overbought or oversold territory Displaying this information as "OB Strength" and "OS Strength" percentages This approach filters out noise while preserving genuine momentum shifts. How the Multi-Length RSI Works The calculation uses an efficient array-based approach: int N = maxLength - minLength + 1 float diff = nz(srcInput - srcInput ) for i = 0 to N - 1 int len = minLength + i float alpha = 1.0 / len float numRma = alpha * diff + (1 - alpha) * array.get(numArr, i) float denRma = alpha * math.abs(diff) + (1 - alpha) * array.get(denArr, i) float rsiVal = denRma != 0 ? 50 * numRma / denRma + 50 : 50 avgRSI += rsiVal Each RSI length is calculated using the RMA (Running Moving Average) formula, then all values are averaged. The result is a composite RSI that responds to momentum changes while filtering out period-specific noise. Visual Components 1. Multi-Length RSI Line The main oscillator line displays the averaged RSI value with a gradient color: Green gradient when RSI is above 50 (bullish momentum) Red gradient when RSI is below 50 (bearish momentum) Color intensity increases as RSI approaches extreme levels 2. Dynamic Channels Two adaptive channel lines track momentum extremes: Upper Channel: Expands when multiple RSI lengths enter overbought territory Lower Channel: Expands when multiple RSI lengths enter oversold territory Channel width indicates momentum strength across all calculated lengths 3. Candle Heatmap An optional feature that colors price bars based on deviation from a linear regression line: Red/Orange bars: Price is significantly above the regression line (overextended to upside) Blue bars: Price is significantly below the regression line (overextended to downside) Yellow bars: Price is near the regression line (neutral) The heatmap uses a 200-bar regression calculation to identify when price has deviated significantly from its statistical trend. 4. Reference Lines Standard RSI reference levels are displayed: 80 and 20: Extreme overbought/oversold 70 and 30: Standard overbought/oversold thresholds 50: Neutral momentum line 5. Background Zones Shaded areas indicate the percentage of RSI lengths in extreme territory: Green shading from bottom: Percentage of lengths in overbought Red shading from top: Percentage of lengths in oversold Dashboard Panel The dashboard displays real-time analysis in a 7-row table: RSI Value: Current composite RSI reading (large text for visibility) Momentum: Current state - OVERBOUGHT, OVERSOLD, BULLISH, BEARISH, or NEUTRAL OB Strength: Percentage of RSI lengths currently above the overbought threshold OS Strength: Percentage of RSI lengths currently below the oversold threshold Heat Level: Current price deviation state - HOT, WARM, NEUTRAL, COOL, or COLD Trend Bias: Overall trend assessment based on RSI level and channel direction Optional Stochastic RSI When enabled, an additional Stochastic RSI line is plotted. This applies the stochastic formula to the RSI itself, providing another layer of momentum analysis. The Stochastic RSI is more sensitive to short-term momentum shifts. Input Parameters RSI Settings: Min RSI Length: Starting length for the RSI range (default: 10) Max RSI Length: Ending length for the RSI range (default: 20) Source: Price source for calculation (default: ohlc4) Overbought: Upper threshold (default: 70) Oversold: Lower threshold (default: 30) Candle Heatmap: Enable Heatmap: Toggle bar coloring on/off (default: enabled) Regression Length: Lookback for linear regression calculation (default: 200) Display: Show Dashboard: Toggle the information panel (default: enabled) Show Dynamic Channels: Toggle channel lines (default: enabled) Show Stochastic RSI: Toggle additional Stoch RSI line (default: disabled) Colors: Bullish: Color for bullish conditions (default: teal) Bearish: Color for bearish conditions (default: red) Neutral: Color for neutral conditions (default: gray) How to Use TurboRSI Pro Identifying Momentum Shifts: Watch for RSI crossing above 50 for bullish momentum confirmation Watch for RSI crossing below 50 for bearish momentum confirmation Use the gradient color to quickly assess momentum direction Using OB/OS Strength: When OB Strength reaches 100%, all RSI lengths are overbought - strong reversal potential When OS Strength reaches 100%, all RSI lengths are oversold - strong bounce potential Partial readings (e.g., 50%) indicate mixed conditions across timeframes Heatmap Analysis: HOT readings combined with high RSI suggest overextension - caution for longs COLD readings combined with low RSI suggest oversold conditions - watch for reversal Use heatmap divergence from RSI for additional confirmation Channel Interpretation: Expanding upper channel with rising RSI confirms strong bullish momentum Expanding lower channel with falling RSI confirms strong bearish momentum Channel contraction suggests momentum is weakening Alert Conditions Six alert conditions are available: RSI Overbought: RSI crosses above overbought threshold RSI Oversold: RSI crosses below oversold threshold RSI Bullish Cross: RSI crosses above 50 RSI Bearish Cross: RSI crosses below 50 All RSI Overbought: Every RSI length is in overbought territory All RSI Oversold: Every RSI length is in oversold territory Best Practices Use on higher timeframes (1H, 4H, Daily) for more reliable signals Combine with price action analysis - RSI confirms, it does not predict Pay attention to OB/OS Strength percentages for conviction assessment The heatmap works best on assets with clear trending behavior Adjust min/max RSI lengths based on your trading style - wider range for smoother signals Limitations Like all oscillators, can remain in overbought/oversold territory during strong trends The heatmap regression may lag during rapid price movements Multi-length calculation requires more processing than single RSI Best suited for swing trading and position trading timeframes Technical Notes This indicator is written in Pine Script v6 and uses: Array-based calculations for efficient multi-length RSI computation Linear regression for heatmap deviation analysis Gradient coloring for intuitive visual feedback State management for dynamic channel calculations The source code is open and available for review and modification. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management. -Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
SEPA Sell Signal IndicatorSEPA Sell Signal Indicator - Documentation Overview A comprehensive exit signal indicator designed to work alongside the main SEPA (Stage, EMA, Price Action) indicator. It detects entry points via SEPA base breakouts and provides intelligent sell signals to protect profits and limit losses. Core Features Entry Detection Automatically detects SEPA base breakout patterns Tracks entry price and calculates swing low reference Monitors position status (LONG/FLAT) 5 Sell Triggers Price < EMA50 (Technical weakness) Protected by EMA10 system (see below) Trend Broken (Price < EMA150 AND EMA200) Major trend reversal signal Not protected - always fires EMA Cross (EMA50 < EMA150) Death cross indicating momentum shift Not protected - always fires Swing Low Broken (Price < Previous Swing Low) Hard stop loss trigger Lookback period: 10 bars (adjustable 5-50) Not protected - always fires Relative Strength Negative (RS vs NIFTY500 < 0) Stock underperforming benchmark index Based on 21-period EMA comparison Not protected - always fires EMA10 Protection System (Refinement Feature) Purpose Prevents premature exits during healthy pullbacks in strong uptrends. Protection Criteria (All must be true) ✅ Stock in uptrend (EMA50 > EMA150 > EMA200) ✅ Price above EMA10 ✅ Price above EMA50 ✅ Only protects Condition 1 (Price < EMA50) Two-Stage Warning System Stage 1: Yellow "CAUTION" Signal Appears when Condition 1 triggers but protection is active Grace period begins (default: 5 bars) Allows time for price to recover Stage 2: Red "SELL" Signal Fires when ANY of these occur: Warning timer expires (5/5 bars) Price drops below EMA10 Price drops below EMA50 Uptrend ends Any other sell condition (2-5) triggers Settings Enable EMA10 Protection: ON/OFF toggle (default: ON) Protection Time Limit: 1-20 bars (default: 5) Visual Elements Chart Signals 🔴 Red Triangle (SELL): Confirmed sell signal - exit position 🟡 Yellow Circle (CAUTION): Warning - monitor closely 🟢 Green Background Tint: Currently in position Information Tables Top Right - Sell Conditions Table Shows real-time status of all 5 conditions ✓ (Green) = Condition NOT met (safe) ✓ (Red) = Condition met (danger) ⚠ (Yellow) = Warning active (monitoring) Displays EMA10 protection status (ON/OFF) Shows warning timer (e.g., "3/5") Bottom Right - Position Details (when in position) Entry price Swing low level Relative strength value (color-coded) Current P&L percentage Bottom Right - Status (when flat) Shows "NO POSITION" Indicates waiting for "BASE BREAKOUT" Alert System Entry Signal: SEPA base breakout detected Warning Alert: Caution - price below EMA50 but protected EMA50 Break: Sell confirmed after protection expires Trend Break: Major reversal - exit immediately EMA Cross: Death cross - exit immediately Swing Low Break: Hard stop - exit immediately RS Negative: Underperformance - exit immediately Configuration Parameters ParameterDefaultRangeDescriptionEMA 10101-50Fast moving average for protectionEMA 50501-200Primary trend indicatorEMA 1501501-300Medium-term trendEMA 2002001-500Long-term trendSwing Low Lookback105-50Bars to find previous swing lowRS EMA215-50Period for relative strength calcBenchmarkCNX500-Index for RS comparisonProtection Time Limit51-20Max bars for warning stateTable Text Size1 (Small)0-40=Tiny, 4=HugeEMA10 ProtectionONON/OFFEnable/disable protection Trading Workflow Entry: Indicator detects SEPA base breakout Monitoring: Track 5 sell conditions in real-time Warning: Yellow CAUTION if minor weakness (Condition 1 only) Grace Period: 5 bars to recover or confirm breakdown Exit: Red SELL signal when conditions confirm weakness Reset: Returns to flat, waits for next base breakout Key Advantages ✅ Selective Protection: Only protects shallow pullbacks, not real breakdowns ✅ Time-Limited: Won't delay exits indefinitely (5-bar max) ✅ Multi-Layered: 5 independent sell conditions ✅ Visual Clarity: Color-coded signals and comprehensive tables ✅ Customizable: All parameters adjustable for your style ✅ Alert System: Never miss a critical signal Philosophy The indicator balances two competing goals: Stay in winning trades during healthy pullbacks Exit quickly when trends genuinely reverse The refined EMA10 protection system achieves this by giving breathing room for minor dips while ensuring swift exits on confirmed weakness.
Pine Script® indicator
by AzeezF
HTR Reclaim Hunter 🏹 HTR Reclaim Hunter (1H Execution + Zones + 4H Bias) HTR Reclaim Hunter is a trend-continuation indicator designed to identify high-probability pullback & reclaim entries using multi-timeframe bias, EMA structure, and dynamic reclaim zones. This indicator is best suited for swing trading and intraday continuation setups, especially in trending markets. 🔑 CORE CONCEPT Trade WITH the higher-timeframe trend. Enter on pullbacks. Confirm strength on reclaim. HTR Reclaim Hunter combines: 4H trend bias 1H execution logic EMA reclaim structure Supply & demand reclaim zones Built-in SL / TP visualization 🧭 RECOMMENDED SETTINGS Best timeframe: 1H (designed for this) Markets: Stocks, Crypto, Futures, Forex Works best in: Trending markets (not chop) 📊 WHAT YOU SEE ON THE CHART 🔹 EMA Structure EMA 50 (green): Trend filter EMA 9 (colored): Momentum & pullback guide 🔹 Reclaim Zones Green boxes: Support / demand zones Red boxes: Resistance / supply zones These zones highlight areas where price previously reacted and may reclaim. 🔹 Trade Signals LONG label: Bullish reclaim setup SHORT label: Bearish reclaim setup 🔹 Risk Levels (Optional) Stop Loss (Red) TP1 (Orange) TP2 (Green) 🟢 LONG TRADE RULES A LONG signal appears when ALL of the following are true: 4H trend is bullish Price above 4H EMA 50 EMA 50 is rising 1H trend is bullish Price above EMA 50 EMA 9 above EMA 50 Pullback occurs Price pulls back below EMA 9 Reaches or taps EMA 50 Reclaim confirmation Strong bullish candle closes back above EMA 9 Candle is not a doji Signal prints A green LONG label appears 👉 This indicates a trend continuation entry, not a reversal. 🔴 SHORT TRADE RULES A SHORT signal appears when ALL of the following are true: 4H trend is bearish Price below 4H EMA 50 EMA 50 is falling 1H trend is bearish Price below EMA 50 EMA 9 below EMA 50 Pullback occurs Price pulls back above EMA 9 Reaches or taps EMA 50 Reclaim confirmation Strong bearish candle closes back below EMA 9 Candle is not a doji Signal prints A red SHORT label appears 🛑 STOP LOSS & TAKE PROFIT When enabled, the indicator automatically plots: Stop Loss Based on recent swing high / low TP1 1R (1× risk) TP2 Configurable runner target (default 2R) These are visual guides only — always manage risk according to your plan. ⚠️ IMPORTANT NOTES This indicator is not meant for ranging or choppy markets Best results occur when: EMA 50 is clearly sloped Price respects reclaim zones Always confirm with: Market structure Volume Higher-timeframe context 🔔 ALERTS Alerts are available for: HRH LONG HRH SHORT Alerts trigger on confirmed reclaim signals, not on every pullback. ❗ DISCLAIMER This indicator is for educational purposes only. It does not provide financial advice. Always test and manage risk appropriately. 🏹 FINAL TIP HTR Reclaim Hunter works best when you are patient. Skip chop. Wait for clean trends. Hunt only high-quality reclaims. If you want, I can also: Write a short description version Create a “Quick Start” section Add example captions for screenshots Help you choose TradingView tags & category trend-following ema reclaim pullback strategy multi-timeframe price action
Pine Script® indicator
by JCW48
RSI Trend Authority [JOAT]RSI Trend Authority - VAR-RSI with OTT Trend Detection System Introduction RSI Trend Authority is an open-source overlay indicator that combines Variable Index Dynamic Average (VAR) smoothed RSI with the Optimized Trend Tracker (OTT) to create a complete trend detection and signal generation system. Unlike traditional RSI which oscillates in a separate pane, this indicator scales the RSI to price and overlays it directly on your chart, making trend analysis more intuitive. The indicator generates clear BUY and SELL signals when the smoothed RSI crosses the OTT trailing stop line, providing actionable entry points with trend confirmation. Originality and Purpose This indicator is NOT a simple mashup of RSI and moving averages. It is an original implementation that transforms RSI into a trend-following overlay system: Why VAR Smoothing? Traditional RSI is noisy and produces many false signals. The Variable Index Dynamic Average (VAR) is an adaptive smoothing algorithm based on the Chande Momentum Oscillator principle. It adjusts its smoothing factor based on market conditions - responding quickly during trends and smoothing out during choppy markets. This creates an RSI that filters noise while preserving genuine momentum shifts. Why OTT Trailing Stop? The Optimized Trend Tracker (OTT) is a percentage-based trailing stop mechanism that only moves in the direction of the trend. When VAR-RSI crosses above OTT, a bullish trend is confirmed; when it crosses below, a bearish trend is confirmed. This provides clear, actionable signals rather than subjective interpretation. Price Scaling Innovation: By scaling RSI (0-100) to price using the formula (RSI * close / 50), the indicator overlays directly on the price chart. This allows traders to see how momentum relates to actual price levels, making trend analysis more intuitive than a separate oscillator pane. ATR Boundaries: Optional volatility-based boundaries show when price is extended relative to its normal range, helping identify potential reversal zones. How the components work together: VAR smoothing removes RSI noise while preserving trend information OTT provides a dynamic trailing stop that generates clear crossover signals Price scaling allows direct overlay on the chart for intuitive analysis ATR boundaries add volatility context for profit target estimation Core Components 1. VAR-RSI (Variable Index Dynamic Average RSI) The foundation of this indicator is the VAR smoothing algorithm applied to RSI. VAR is an adaptive moving average that adjusts its smoothing factor based on the Chande Momentum Oscillator principle: f_var_calc(float data, int length) => int a = 9 float b = data > nz(data ) ? data - nz(data ) : 0.0 float c = data < nz(data ) ? nz(data ) - data : 0.0 float d = math.sum(b, a) float e = math.sum(c, a) float f = nz((d - e) / (d + e)) float g = math.abs(f) float h = 2.0 / (length + 1) float x = ta.sma(data, length) This creates an RSI that: Responds quickly during trending conditions Smooths out during choppy, sideways markets Reduces false signals compared to raw RSI 2. OTT (Optimized Trend Tracker) The OTT acts as a dynamic trailing stop that follows the VAR-RSI: In uptrends, OTT trails below the VAR-RSI line In downtrends, OTT trails above the VAR-RSI line The OTT Percent parameter controls how closely it follows When VAR-RSI crosses above OTT, a bullish trend is confirmed. When VAR-RSI crosses below OTT, a bearish trend is confirmed. 3. Price Scaling The RSI (0-100 scale) is converted to price scale using: float scaleFactor = close / 50.0 float varRSIScaled = varRSI * scaleFactor This allows the indicator to overlay directly on price, showing how momentum relates to actual price levels. Visual Components VAR-RSI Line (Cyan/Magenta) The main indicator line with gradient coloring: Cyan gradient when RSI is above 50 (bullish) Magenta gradient when RSI is below 50 (bearish) Line thickness of 3 for clear visibility OTT Line (Yellow Circles) The trailing stop line displayed as circles: Acts as dynamic support in uptrends Acts as dynamic resistance in downtrends Crossovers generate trading signals Trend Fill The area between VAR-RSI and OTT is filled: Cyan fill during bullish trends Magenta fill during bearish trends Fill transparency allows price visibility Buy position and LONG on Dashboard with a Uptrend: ATR Boundaries (Optional) Dotted lines showing volatility-based price boundaries: Upper band: Close + (ATR x Multiplier) Lower band: Close - (ATR x Multiplier) Color matches current trend direction Buy/Sell Signals Clear labels appear at signal points: BUY label below bar when VAR-RSI crosses above OTT SELL label above bar when VAR-RSI crosses below OTT Additional glow circles highlight signal bars Bar Coloring Optional feature that colors price bars: Cyan bars during bullish trend Magenta bars during bearish trend Dashboard Panel The 8-row dashboard provides comprehensive status information: Signal: Current position - LONG or SHORT (large text) VAR-RSI: Current smoothed RSI value (large text) RSI State: OVERBOUGHT, OVERSOLD, BULLISH, or BEARISH OTT Trend: UPTREND or DOWNTREND based on OTT direction Bars Since: Number of bars since last signal Price: Current close price (large text) OTT Level: Current OTT trailing stop value Input Parameters RSI Settings: RSI Length: Period for RSI calculation (default: 100) Source: Price source (default: close) VAR Settings: VAR Length: Adaptive smoothing period (default: 50) OTT Settings: OTT Period: Trailing stop calculation period (default: 30) OTT Percent: Distance percentage for trailing stop (default: 0.2) ATR Trend Boundaries: Show ATR Boundaries: Toggle visibility (default: enabled) ATR Length: Period for ATR calculation (default: 14) ATR Multiplier: Distance multiplier (default: 2.0) Display Options: Show Buy/Sell Signals: Toggle signal labels (default: enabled) Show Status Table: Toggle dashboard (default: enabled) Table Position: Choose corner placement Color Bars by Trend: Toggle bar coloring (default: enabled) Color Scheme: Bullish Color: Main bullish color (default: cyan) Bearish Color: Main bearish color (default: magenta) OTT Line: Trailing stop color (default: yellow) VAR-RSI Line: Main line color (default: teal) ATR colors for boundaries How to Use RSI Trend Authority Signal-Based Trading: Enter LONG when BUY signal appears (VAR-RSI crosses above OTT) Enter SHORT when SELL signal appears (VAR-RSI crosses below OTT) Use the OTT line as a trailing stop reference Trend Confirmation: Cyan fill indicates bullish trend - favor long positions Magenta fill indicates bearish trend - favor short positions Check RSI State in dashboard for momentum context Using the Dashboard: Monitor "Bars Since" to assess signal freshness Check RSI State for overbought/oversold warnings Use OTT Level as a reference for stop placement ATR Boundaries: Price near upper ATR band in uptrend suggests extension Price near lower ATR band in downtrend suggests extension Boundaries help identify potential reversal zones Parameter Optimization For Faster Signals: Decrease RSI Length (try 50-80) Decrease VAR Length (try 30-40) Decrease OTT Period (try 15-25) For Smoother Signals: Increase RSI Length (try 120-150) Increase VAR Length (try 60-80) Increase OTT Period (try 40-50) For Tighter Stops: Decrease OTT Percent (try 0.1-0.15) For Wider Stops: Increase OTT Percent (try 0.3-0.5) Alert Conditions Three alert conditions are available: Buy Signal: VAR-RSI crosses above OTT Sell Signal: VAR-RSI crosses below OTT Trend Change: OTT direction changes Understanding the OTT Calculation The OTT uses a percentage-based trailing mechanism: float farkOTT = mavgOTT * ottPercent * 0.01 float longStopCalc = mavgOTT - farkOTT float shortStopCalc = mavgOTT + farkOTT longStop := mavgOTT > nz(longStop ) ? math.max(longStopCalc, nz(longStop )) : longStopCalc shortStop := mavgOTT < nz(shortStop ) ? math.min(shortStopCalc, nz(shortStop )) : shortStopCalc This ensures the trailing stop only moves in the direction of the trend, never against it. Best Practices Use on 1H timeframe or higher for more reliable signals Wait for signal confirmation before entering trades Consider RSI State when evaluating signal quality Use ATR boundaries for profit target estimation The longer RSI length (100) provides smoother trend detection Combine with support/resistance analysis for better entries Limitations Signals may lag during rapid price movements due to smoothing Works best in trending markets; may whipsaw in ranges The overlay nature means RSI values are scaled, not absolute Default parameters are optimized for crypto and forex; adjust for other markets Technical Notes This indicator is written in Pine Script v6 and uses: VAR (Variable Index Dynamic Average) for adaptive smoothing OTT (Optimized Trend Tracker) for trailing stop calculation ATR for volatility-based boundaries Gradient coloring for intuitive trend visualization The source code is open and available for review and modification. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management. -Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
6
2-Year Simple Moving Average (SMA)2-Year Simple Moving Average (SMA) This indicator plots a 2-year Simple Moving Average (SMA) of price, designed to highlight long-term market trends and major support or resistance zones. The 2-year SMA automatically adapts to the chart’s timeframe: Daily charts: Uses either trading days (≈252 per year) or calendar days (365 per year) Weekly charts: Uses 52 weeks per year Monthly charts: Uses 12 months per year Intraday charts: Estimates bars per year based on the selected timeframe An optional secondary smoothing moving average can be applied to the 2-year SMA itself, with multiple smoothing types available: SMA EMA SMMA (RMA) WMA VWMA SMA with optional Bollinger Bands When “SMA + Bollinger Bands” is enabled, volatility bands are calculated using the standard deviation of the 2-year SMA, helping visualize trend stability and expansion. This indicator is best suited for: Identifying long-term trend direction Locating macro support and resistance Filtering short-term market noise Assessing price position relative to long-term fair value Ideal for investors and swing traders seeking a high-timeframe trend reference rather than short-term trade signals. By JezzaBTC
Pine Script® indicator
by JezzaBTC
SMA Indicator Signals [MK]Overview The SMA Indicator Signals indicator is designed to identify high-probability trend-following entries using a dual SMA system and RSI filtering. Unlike traditional crossover indicators that rely on ta.crossover (which often fails during volatile market gaps), this script uses state-based logic to capture signals even when the price "jumps" over the moving average. The "Gap-Over" Problem Solved In fast-moving markets or at market open, price often gaps significantly. If the price opens above the SMA 20 after being below it, a standard indicator usually misses the signal because no "physical" cross occurred on the chart. This indicator compares the current state to the previous state. If the price is now above the SMA while previously being below, the signal triggers regardless of the gap. Key Features Persistent Signals: Unlike strategies that hide signals while a trade is active, this indicator plots an icon for every valid occurrence, allowing you to scale into positions or identify secondary entries. Trend-Filtered: Long signals only appear when the 20 SMA is above the 50 SMA (and vice-versa for shorts). RSI Guardrail: Built-in RSI logic prevents you from chasing "Longs" into overbought territory or "Shorts" into oversold conditions. Universal Alerts: Includes pre-configured alertcondition calls for Longs, Shorts, or both. How to Trade it The Signal: Look for the Green (Long) or Red (Short) triangles. User Discretion: Since this version removes automated ADX/Expansion filters, the trader should look at the "width" of the gap between the Blue (20) and Orange (50) SMAs. Wider gaps usually indicate stronger momentum. Alerts: Create an alert and select "Any SSMA Signal" to be notified on your phone or desktop the moment a setup forms. Settings Fast SMA (20): Your primary trigger line. Slow SMA (50): Your primary trend filter. RSI Thresholds: Customize how "early" or "late" you want to be filtered out of a move based on momentum.
Pine Script® indicator
by needfulEggs7c991
MDZ Strategy v4.2 - Multi-factor trend strategyWhat This Strategy Does MDZ (Momentum Divergence Zones) v4.2 is a trend-following strategy that enters long positions when multiple momentum and trend indicators align. It's designed for swing trading on higher timeframes (2H-4H) and uses ATR-based position management. The strategy waits for strong trend confirmation before entry, requiring agreement across five different filters. This reduces trade frequency but aims to improve signal quality. Entry Logic A long entry triggers when ALL of the following conditions are true: 1. EMA Stack (Trend Structure) Price > EMA 20 > EMA 50 > EMA 200 This "stacked" alignment indicates a strong established uptrend 2. RSI Filter (Momentum Window) RSI between 45-75 (default) Confirms momentum without entering overbought territory 3. ADX Filter (Trend Strength) ADX > 20 (default) Ensures the trend has sufficient strength, not a ranging market 4. MACD Confirmation MACD line above signal line Histogram increasing (momentum accelerating) 5. Directional Movement +DI > -DI Confirms bullish directional pressure Exit Logic Positions are managed with ATR-based levels: ParameterDefaultDescriptionStop Loss2.5 × ATRBelow entry priceTake Profit6.0 × ATRAbove entry priceTrailing Stop2.0 × ATROptional, activates after entry The default configuration produces a 1:2.4 risk-reward ratio. Presets The strategy includes optimized presets based on historical testing: PresetTimeframeNotes1H Standard1 HourMore frequent signals2H Low DD2 HourConservative settings3H Optimized3 HourBalanced approach4H Swing4 HourWider stops for swing tradesCustomAnyFull manual control Select "Custom" to adjust all parameters manually. Inputs Explained EMAs Fast EMA (20): Short-term trend Slow EMA (50): Medium-term trend Trend EMA (200): Long-term trend filter RSI Length: Lookback period (default 14) Min/Max: Entry window to avoid extremes ADX Min ADX: Minimum trend strength threshold Risk Stop Loss ATR: Multiplier for stop distance Take Profit ATR: Multiplier for target distance Trail ATR: Trailing stop distance (if enabled) Session (Optional) Filter entries by time of day Recommended OFF for 3H+ timeframes What's Displayed Info Panel (Top Right) Current preset Trend status (Strong/Wait) ADX, RSI, MACD readings Position status Risk-reward ratio Stats Panel (Top Left) Net P&L % Total trades Win rate Profit factor Maximum drawdown Chart EMA lines (20 blue, 50 orange, 200 purple) Green background during strong uptrend Triangle markers on entry signals Important Notes ⚠️ This is a long-only strategy. It does not take short positions. ⚠️ Historical results do not guarantee future performance. Backtests show what would have happened in the past under specific conditions. Markets change, and any strategy can experience drawdowns or extended losing periods. ⚠️ Risk management is your responsibility. The default settings risk 100% of equity per trade for backtesting purposes. In live trading, appropriate position sizing based on your risk tolerance is essential. ⚠️ Slippage and commissions matter. The backtest includes 0.02% commission and 1 tick slippage, but actual execution costs vary by broker and market conditions. Best Practices Test on your specific market — Results vary significantly across different instruments Use appropriate position sizing — Never risk more than you can afford to lose Combine with your own analysis — No indicator replaces understanding market context Paper trade first — Validate the strategy matches your trading style before risking capital Alerts Two alerts are available: MDZ Long Entry: Fires when all entry conditions are met Uptrend Started: Fires when EMA stack first aligns bullish Methodology This strategy is based on the principle that trend continuation has better odds than reversal when multiple timeframe momentum indicators agree. By requiring five independent confirmations, it filters out weak setups at the cost of fewer total signals. The ATR-based exits adapt to current volatility rather than using fixed pip/point targets, which helps the strategy adjust to different market conditions. Questions? Leave a comment below.
Pine Script® strategy
by VolForge
MACD Matrix: Angle & SettlementThis indicator is a comprehensive Multi-Timeframe (MTF) Dashboard designed for technical traders who rely on MACD not just for crossovers, but for Momentum Angle and Settlement (Hooks). Instead of cluttering your screen with 5 different MACD charts, this Matrix calculates the math in the background and presents a clean "Heads-Up Display" of the MACD state across your specific timeframes (Default: 3m, 15m, 1h, 4h, 16h). The Concept: "Angle Settlement" Standard MACD indicators only show you when a cross happens. By then, the move is often halfway over. This script focuses on the Angle (Slope) of the MACD line to predict turns before they happen: Steep Angle: Momentum is accelerating. (Strong Trend) Settling Angle: The slope is flattening out. The MACD line is "hooking." (Reversal/Cross Imminent) Dashboard Columns Explained TF (Timeframe): Auto-formats your settings into readable text (e.g., "240" becomes "4h"). Zone: > 0 (Green): MACD is above the Zero Line (Bullish Trend context). < 0 (Red): MACD is below the Zero Line (Bearish Trend context). Cross: PCO (Green): Positive Crossover (MACD > Signal). NCO (Red): Negative Crossover (MACD < Signal). Deg (°): The calculated mathematical angle of the MACD line. Positive (+): Momentum is rising. Negative (-): Momentum is falling. State (The Strategy): STEEP (Bright Color): The angle is increasing. Do not trade against this momentum. SETTLE (Dim Color): The angle is decreasing compared to the previous bar. The momentum is "cooling off," often signaling a "Hook" or an upcoming crossover. Settings & Customization Custom Timeframes: You can freely change TF-1, TF-2, etc., in the settings. The table labels will auto-update (e.g., if you change 4h to 1D, the table will display "1D"). MACD Lengths: Fully customizable (Default 12, 26, 9). Angle Sensitivity: A multiplier to calibrate the "Degrees" to your specific asset class (Crypto, Forex, or Indices). If angles look too small, increase this value.
Pine Script® indicator
by PratikKharat1990
Liquidation Bubbles [OmegaTools]🔴🟢 Liquidation Bubbles — Advanced Volume & Price Stress Detector Liquidation Bubbles is a professional-grade analytical tool designed to identify forced positioning events, stop-runs, and liquidation clusters by combining price displacement and volume imbalance into a single, statistically normalized framework. This indicator is not a repainting signal tool and not a simple volume spike detector. It is a contextual market stress mapper, built to highlight areas where one-sided positioning becomes unstable and the probability of forced order execution (liquidations, stops, margin calls) materially increases. --- ## 🔬 Core Concept Market liquidations do not occur randomly. They emerge when price deviates aggressively from its volume-weighted equilibrium while volume itself becomes abnormal. Liquidation Bubbles detects exactly this condition by: * Estimating a **dynamic equilibrium price** using an *inverted volume-weighted moving average* * Measuring **directional price stress** relative to that equilibrium * Measuring **volume stress** relative to its own adaptive baseline * Normalizing both into **Z-score–like metrics** * Highlighting only **statistically extreme, asymmetric events** The result is a clear visual map of stress points where market participants are most vulnerable. --- ⚙️ Methodology (How It Works) 1️⃣ Advanced Inverted VWMA (Equilibrium Engine) The script uses a custom Advanced VWMA, where: * High volume bars receive less weight * Low volume bars receive more weight This produces a **robust equilibrium level**, resistant to manipulation and volume bursts. This equilibrium is used for **both price and volume normalization**, creating a consistent statistical framework. --- 2️⃣ Price Stress (Directional) Price stress is calculated as: * The **maximum deviation** between high/low and equilibrium * Directionally signed (upside vs downside) * Normalized by its own historical volatility This allows the script to distinguish: * Aggressive upside exhaustion * Aggressive downside capitulation --- 3️⃣ Volume Stress Volume stress is measured as: * Deviation from volume equilibrium * Normalized by historical volume dispersion This filters out: * Normal high-volume sessions * Illiquid noise And isolates abnormal participation imbalance. --- 4️⃣ Liquidation Logic A liquidation event is flagged when: * Both price stress and volume stress exceed adaptive thresholds * The imbalance is directional and statistically extreme Optional Combined Score Mode allows aggregation of price & volume stress into a single composite metric for smoother signals. --- 🔵 Bubble System (Signal Hierarchy) The indicator plots **two tiers of bubbles**: 🟢🔴 Small Bubbles * Early warning stress points * Localized stop-runs * Micro-liquidations * Often precede reactions or short-term reversals 🟢🔴 Big Bubbles * Full liquidation clusters * Forced unwinds * High probability exhaustion zones * Frequently align with: * Intraday extremes * Range boundaries * Reversal pivots * Volatility expansions Bubble color: * **Green** → Downside liquidation (sell-side exhaustion) * **Red** → Upside liquidation (buy-side exhaustion) Bubble placement is **ATR-adjusted**, ensuring visual clarity without overlapping price. --- 🔄 Cross-Market Volume Analysis The script allows optional **external volume sourcing**, enabling: * Futures volume applied to CFDs * Index volume applied to ETFs * Spot volume applied to derivatives This is critical when: * Your traded instrument has unreliable volume * You want **institutional-grade confirmation** --- 🧠 How to Use Liquidation Bubbles This indicator is **not meant to be traded alone**. Best use cases: * 🔹 Confluence with support & resistance * 🔹 Contextual confirmation for reversals * 🔹 Identifying fake breakouts * 🔹 Liquidity sweep detection * 🔹 Risk management (avoid entering into liquidation zones) Ideal for: * Futures * Indices * Crypto * High-liquidity FX pairs * Intraday & swing trading --- 🎯 Who This Tool Is For Liquidation Bubbles is designed for: * Advanced discretionary traders * Order-flow & liquidity-based traders * Macro & index traders * Professionals seeking **context**, not signals If you want **where the market is fragile**, not just where price moved — this tool was built for you. --- 📌 Key Characteristics ✔ Non-repainting ✔ Statistically normalized ✔ Adaptive to volatility ✔ Works on all timeframes ✔ Futures & crypto ready ✔ No lagging indicators ✔ No moving average crosses --- Liquidation Bubbles does not predict the future. It shows you where the market is most likely to break. — OmegaTools
Pine Script® indicator
by OmegaTools
1
GC/DC Momentum Predictor🎯 GC/DC Momentum Predictor v1.0 CORE CONCEPT: Predicts Golden Cross/Death Cross BEFORE they occur by analyzing momentum, proximity, and trend alignment across 3 moving averages (20/60/120). KEY SIGNALS: - Strong GC/DC: Signals occurring with trend (above/below 120 MA) - Highest reliability - Weak GC/DC: Signals occurring against trend - Lower reliability, use caution - Support Hold: ⭐ MOST IMPORTANT - Price bounces from 120 MA during DC = Low-risk buy opportunity - Resistance Break: Price breaks above 120 MA during GC = Strong bullish confirmation HOW TO USE: 1. Add indicator to chart (works best on 4H/Daily timeframes) 2. Customize MA periods in Settings if needed (default: 20/60/120) 3. Set up alerts for key signals (especially "Support Hold") 4. Watch dashboard for real-time signal status DASHBOARD GUIDE: - MA: Your moving average periods - Signal: Current prediction (Strong GC/Weak GC/Strong DC/Weak DC/No Signal) - Short MA: 20/60 alignment (Bullish/Bearish/Mixed) - Long MA: Price position vs 120 MA (Bullish/Bearish) - 120 Status: Support/Resistance action (most critical for entries/exits) - Gap: Distance between 20/60 MAs (negative = DC zone, positive = GC zone) ALERT SETUP: Create alerts in TradingView for: - 💪 Support Hold (best buy signal) - ✅ Strong GC (strong uptrend entry) - 🚀 Resistance Break (breakout confirmation) - ❌ Strong DC (exit signal) CUSTOMIZATION: All dashboard rows can be toggled on/off in Settings > Dashboard Settings Adjust colors, position, and size to match your trading style BEST PRACTICES: ✓ Wait for "Support Hold" during corrections for optimal entries ✓ Strong signals are more reliable than Weak signals ✓ Combine with volume analysis for confirmation ✓ Use "Once Per Bar Close" for alerts to avoid false signals PARAMETER GUIDE: - Short SMA (20): Short-term moving average period - Long SMA (60): Mid-term moving average period - Trend SMA (120): Long-term trend moving average period - Proximity Threshold (2%): How close MAs must be for signal (lower = fewer signals) - Acceleration Factor (1.2): Momentum strength requirement (higher = fewer signals) Version 1.0 | January 2025 Free to use | Please leave feedback in comments! 🎯 GC/DC 모멘텀 예측기 v1.0 핵심 개념: 3개의 이동평균선(20/60/120)에서 모멘텀, 근접도, 추세 정렬을 분석하여 골든크로스/데드크로스를 발생 전에 미리 예측합니다. 주요 신호: - Strong GC/DC: 추세와 함께 발생하는 신호(120 MA 위/아래) - 신뢰도 최고 - Weak GC/DC: 추세와 반대로 발생하는 신호 - 신뢰도 낮음, 주의 필요 - Support Hold: ⭐ 가장 중요 - DC 중 120 MA에서 반등 = 저위험 매수 기회 - Resistance Break: GC 중 120 MA 돌파 = 강한 상승 확인 사용 방법: 1. 차트에 지표 추가 (4시간봉/일봉에서 최적) 2. 필요시 설정에서 MA 기간 조정 (기본값: 20/60/120) 3. 핵심 신호에 대한 알림 설정 (특히 "Support Hold") 4. 대시보드에서 실시간 신호 상태 확인 대시보드 가이드: - MA: 사용 중인 이동평균 기간 - Signal: 현재 예측 신호 (Strong GC/Weak GC/Strong DC/Weak DC/No Signal) - Short MA: 20/60 배열 상태 (Bullish/Bearish/Mixed) - Long MA: 120 MA 대비 가격 위치 (Bullish/Bearish) - 120 Status: 지지/저항 행동 (진입/청산에 가장 중요) - Gap: 20/60 MA 간 거리 (음수 = DC 구간, 양수 = GC 구간) 알림 설정: 트레이딩뷰에서 다음 신호에 대한 알림 생성: - 💪 Support Hold (최고의 매수 신호) - ✅ Strong GC (강한 상승 추세 진입) - 🚀 Resistance Break (돌파 확인) - ❌ Strong DC (청산 신호) 커스터마이징: 모든 대시보드 행은 설정 > Dashboard Settings에서 켜기/끄기 가능 색상, 위치, 크기를 트레이딩 스타일에 맞게 조정 추천 사용법: ✓ 조정 시 "Support Hold" 대기로 최적 진입점 확보 ✓ Strong 신호가 Weak 신호보다 신뢰도 높음 ✓ 거래량 분석과 병행하여 확인 ✓ 알림은 "봉 종가 시 한 번"으로 설정하여 허위 신호 방지 파라미터 설명: - Short SMA (20): 단기 이동평균 기간 - Long SMA (60): 중기 이동평균 기간 - Trend SMA (120): 장기 추세 이동평균 기간 - Proximity Threshold (2%): 신호 발생을 위한 MA 간 근접도 (값이 작을수록 신호 적음) - Acceleration Factor (1.2): 모멘텀 강도 요구 수준 (값이 클수록 신호 적음) 버전 1.0 | 2025년 1월 무료 사용 | 댓글로 피드백 부탁드립니다!
Pine Script® indicator
by mossst