Get started

Moving Averages

Smart Risk Meter (Adaptive v2)How it works The Smart Risk Meter reads momentum, distance from the long-term trend, and drawdown pressure, then adapts those signals to the asset’s volatility. Low-vol assets get tighter scaling, high-vol assets get wider scaling, so the 0–1 risk score stays meaningful on anything from SPX to BTC. How to use it • 0.0–0.4: Accumulation zone. Market is calm or recovering — ideal for building positions. • 0.4–0.6: Neutral. Trend can go either way — manage sizing. • 0.6–0.8: Elevated risk. Momentum is stretched — tighten stops or reduce exposure. • 0.8–1.0: Overheated. High risk of sharp pullbacks — avoid chasing. Use it as a bias filter, a DCA timing tool, or a simple risk-on/risk-off read. It won’t predict tops or bottoms, but it keeps you aligned with the market’s temperature.
Pine Script® indicator
by poseidonpips
UT Bot Pro Max (Maks Edition)Script v2.0 UT Bot Pro Max is an advanced, high-precision evolution of the well-known UT Bot indicator. This version is fully rebuilt into a complete decision-making system that evaluates trend structure, volatility conditions, momentum signals, and entry quality. It is designed for traders who want clear, structured signals supported by objective filters and transparent reasoning. 1. Core Engine: ATR-Based Trailing Logic At the heart of the system is an ATR dynamic trailing stop. It is responsible for: detecting trend reversals identifying breakout conditions switching between long and short bias determining signal strength Unlike simple ATR lines, this engine adapts to momentum expansion and contraction, forming the backbone for every signal. 2. Three-Tier Signal Structure Each signal is classified into one of three levels based on the number of confirmations: Strong Signals ATR breakout trend filter (price relative to EMA200) RSI filter (oversold/overbought context) This is the highest-quality confirmation and is suitable for full-size entries. Medium Signals ATR breakout trend filter (no RSI filter) This represents a valid trend continuation but with slightly reduced confirmation. Weak Signals ATR breakout only (no trend filter, no RSI filter) This is an early-stage impulse which can evolve into a stronger move. The multi-level classification allows the trader to size positions rationally and avoid over-committing during uncertain market conditions. 3. Move-Since-Entry Tracking When a new long or short position is detected, the indicator records the entry price and automatically tracks the percentage movement from that point. This offers: real-time monitoring of open trade performance objective context for managing exits clear visualization of progress since entry 4. Smart State-Change Alerts Instead of simple “BUY” or “SELL” messages, the script sends highly structured alerts whenever the internal state changes. Each alert includes: the symbol and timeframe signal direction and strength recommended position size based on signal tier ATR values RSI value and its state trend context (bullish, bearish, neutral) distance from ATR trailing stop movement since entry previous state reference (optional) This makes it ideal for automated systems, algorithmic routing, or Telegram-based signal delivery. 5. Professional On-Chart Status Table The indicator displays a refined information panel containing: current signal state (Strong / Medium / Weak / Hold) ATR signal direction trend filter result RSI value and condition distance to trailing stop (percentage) current position (long / short / flat) entry recommendation based on signal strength ATR value and additional context in expanded mode There is also a compact mode optimized specifically for mobile trading. 6. Optional Heikin Ashi Mode The indicator can operate using Heikin Ashi close values for traders who prefer smooth, noise-reduced visualizations. The internal logic is recalculated automatically. 7. Trend-Colored Candles An optional feature allows candle coloring based on price position relative to the ATR stop line, highlighting bullish and bearish phases directly on the chart. What This Indicator Provides Accurate, context-aware entry signals Scalable position sizing through multi-tier structure Objective trend confirmation Breakout detection with volatility adaptation Continuous tracking of open position performance Detailed real-time explanations through alerts A complete visual dashboard consolidating all key metrics UT Bot Pro Max (Maks Edition) is built as a practical tool for daily trading. It is suitable for scalping, day trading, swing trading, automated alerts, and mobile workflows.
Pine Script® indicator
by msukhodolskyi
Simple Multi VWAPSimple Multi VWAP - Release Notes Overview **Simple Multi VWAP** is a powerful Volume Weighted Average Price (VWAP) indicator that allows you to display up to **four independent VWAP lines** simultaneously on your chart, each with its own customisable anchor period. This provides traders with a comprehensive view of volume-weighted price levels across different timeframes, enabling better analysis of price action and support/resistance levels. Key Features Multiple VWAP Lines - Display up to **4 independent VWAP lines** on a single chart - Each VWAP can be individually enabled or disabled - Each VWAP maintains its own anchor period independently Flexible Anchor Periods Choose from **10 different anchor periods** for each VWAP: - **Session** - Resets daily - **Week** - Resets weekly - **Month** - Resets monthly - **Quarter** - Resets quarterly - **Year** - Resets annually - **Decade** - Resets every 10 years - **Century** - Resets every 100 years - **Earnings** - Resets on earnings announcements - **Dividends** - Resets on dividend payments - **Splits** - Resets on stock splits Native Styling Support - Full integration with TradingView's native style dialog - Right-click any VWAP line to customise: - Colour - Line style (solid, dashed, dotted, etc.) - Line thickness - Opacity - Default colours provided for easy identification: - **VWAP #1**: Orange (#f19d37) - **VWAP #2**: Purple (#7859bc) - **VWAP #3**: Red (#df484b) - **VWAP #4**: Cyan (#54b9d1) Global Settings - **Source**: Choose the price source (default: Close) - **Offset**: Shift VWAP lines forward/backward in time - **Hide on 1D or Above**: Automatically hide VWAPs on daily or higher timeframes How to Use Basic Setup 1. **Add the Indicator**: Search for "Simple Multi VWAP" in TradingView's indicator library 2. **Enable VWAPs**: Check the boxes next to the VWAPs you want to display 3. **Select Anchor Periods**: Choose the anchor period for each enabled VWAP using the dropdown next to each VWAP toggle 4. **Customise Styling**: Right-click any VWAP line → "Style" to customise appearance Recommended Configurations Intraday Trading - **VWAP #1**: Session (daily reset) - **VWAP #2**: Week (weekly reset) - **VWAP #3**: Month (monthly reset) Swing Trading - **VWAP #1**: Week (weekly reset) - **VWAP #2**: Month (monthly reset) - **VWAP #3**: Quarter (quarterly reset) Long-term Analysis - **VWAP #1**: Month (monthly reset) - **VWAP #2**: Quarter (quarterly reset) - **VWAP #3**: Year (yearly reset) - **VWAP #4**: Decade (decade reset) Input Settings Global Settings - **Source**: Price source for all VWAP calculations (default: Close) - **Offset**: Number of bars to shift the VWAP lines (default: 0) - **Hide VWAP on 1D or Above**: Toggle to hide all VWAPs on daily/weekly/monthly charts VWAP Settings Each VWAP has two settings displayed on the same line: - **Enable Toggle**: Checkbox to show/hide the VWAP line (labelled as "VWAP#1", "VWAP#2", etc.) - **Anchor Period**: Dropdown to select the reset period (labelled as "---> Anchor Period") *Note: All VWAP settings are grouped under a single "VWAPs" group for easy organisation.* Technical Details Calculation Method The indicator uses TradingView's built-in `ta.vwap()` function, which calculates: **VWAP** = Σ(Price × Volume) / Σ(Volume) The calculation resets based on the selected anchor period, ensuring accurate volume-weighted averages for each timeframe. Event-Based Anchors For Earnings, Dividends, and Splits anchors, the indicator uses TradingView's data requests to detect these events automatically, ensuring precise reset points. Use Cases Support and Resistance Levels Multiple VWAPs help identify key support and resistance zones across different timeframes. Price often respects these levels, making them valuable for entry and exit decisions. Trend Analysis Compare price action against multiple VWAPs to gauge trend strength: - Price above all VWAPs = Strong uptrend - Price below all VWAPs = Strong downtrend - Mixed positioning = Consolidation or trend change Mean Reversion When price deviates significantly from VWAP, it may indicate overextension and potential mean reversion opportunities. Entry/Exit Signals - **Long Entry**: Price crosses above VWAP with volume confirmation - **Short Entry**: Price crosses below VWAP with volume confirmation - **Exit**: Price returns to VWAP after a significant move Tips & Best Practices 1. **Start Simple**: Begin with 1-2 VWAPs to avoid chart clutter 2. **Match Timeframes**: Use anchor periods that align with your trading timeframe 3. **Combine with Volume**: VWAP works best when combined with volume analysis 4. **Use Multiple Timeframes**: Apply the indicator to multiple chart timeframes for confirmation 5. **Customise Colours**: Use distinct colours for each VWAP to easily identify them Notes - The indicator requires volume data to function properly - VWAP calculations are most accurate on intraday charts - Event-based anchors (Earnings, Dividends, Splits) require symbol data availability - All VWAPs share the same source input for consistency Version Information **Current Version**: 1.0.0
Pine Script® indicator
by racy_1
Non-Repainting Dynamic EMA SystemDynamic EMA System - Detailed Explanation Overview This indicator creates four adaptive Exponential Moving Averages (EMAs) that automatically adjust their periods based on current market conditions. Unlike traditional fixed-period EMAs, these lines dynamically become faster or slower to better match the market's behavior. Core Components 1. Base EMA Lengths (Starting Points) EMA 1: Base period of 10 (fastest) EMA 2: Base period of 20 (fast-medium) EMA 3: Base period of 30 (medium) EMA 4: Base period of 200 (trend identifier) These base values are not fixed—they serve as starting points that get multiplied by various market condition factors. Market Analysis Features The indicator analyzes 12 different market characteristics to understand current conditions: Technical Indicators Used: RSI (Relative Strength Index) Measures momentum and overbought/oversold conditions Normalized to 0-1 scale ADX (Average Directional Index) Measures trend strength Higher values = stronger trends Bollinger Bands Position Shows where price sits relative to volatility bands Indicates potential reversals or breakouts VWAP (Volume Weighted Average Price) Institutional trading benchmark Signals if price is above/below average weighted price Ichimoku Cloud Japanese indicator showing support/resistance Tenkan-Kijun relationship indicates trend direction TRAMA (Triangular Moving Average) Advanced adaptive moving average Responds to genuine price movements Volume Analysis Compares current volume to 20-period average Higher volume = more significant moves ATR-Based Volatility Weighted by volume for accuracy Adjusts EMAs to market speed Shannon Entropy Measures market randomness vs. order High entropy = choppy; Low entropy = trending Price Correlation (Short-term) How consistent price movements are Detects momentum shifts Price Correlation (Long-term) Broader trend consistency Confirms regime stability Volume Strength Normalized volume ratio Validates price movements How Length Adaptation Works Market Regimes Identified: The system identifies 4 distinct market conditions based on the 12 features: Regime 1 (Green): Calm, ranging market → Shorter EMAs (more responsive) Regime 2 (Blue): Strong trending market → Medium-length EMAs (balance speed/noise) Regime 3 (Red): High volatility/choppy → Longer EMAs (filter noise) Regime 4 (Gray): Transitional/neutral → Moderate EMAs (adaptive middle ground) Adaptation Formula: Each EMA length is calculated as: Final Length = Base Length × Regime Multiplier × Volatility Adjustment × Momentum Adjustment × Entropy Adjustment Where: Regime Multiplier: 0.3x to 2.5x depending on market type Volatility Adjustment: Increases length during high volatility (filters noise) Momentum Adjustment: Based on RSI - extreme readings adjust sensitivity Entropy Adjustment: Lower entropy (trending) = tighter EMAs Key Adaptive Features 1. Volatility Response When market volatility increases: EMAs lengthen automatically to avoid whipsaws Calculated using ATR weighted by volume 2. Volume Integration Higher volume makes the system: React faster to price changes Increase learning rate Trust the current move more 3. Correlation Analysis Short-term correlation: Detects immediate momentum Long-term correlation: Confirms overall trend stability Adjusts EMA sensitivity accordingly 4. Entropy Monitoring Measures market "disorder" Trending markets → Tighter EMAs (follow trend) Choppy markets → Wider EMAs (reduce noise) Non-Repainting Design Critical Safety Features: Confirmed Data Only All calculations use close , high , low , etc. Current bar data is only used if barstate.isconfirmed Locked Updates EMA lengths only change when bar closes Variables prefixed with confirmed_ store locked values No Look-Ahead System learns from past bars only Future data cannot influence current values Historical Consistency Once a bar closes, its EMA values never change Alerts and signals are reliable Visual Interpretation Background Colors: Green: Calm/ranging market (Regime 1) Blue: Strong trend (Regime 2) Red: High volatility/choppy (Regime 3) Gray: Transitional state (Regime 4) Color transparency indicates confidence: Solid color = High confidence in regime identification Faint color = Lower confidence, potential transition EMA Lines: Red EMA (fastest): Short-term momentum Orange EMA: Medium-term trend Yellow EMA: Intermediate trend confirmation Blue EMA: Long-term trend direction Information Dashboard The top-right table displays: Metric Purpose Regime Strength How strongly current conditions match the identified regime (0-1) Silhouette Score Quality of regime identification (>0.5 = Excellent, >0.2 = Good) EMA Values & Lengths Current price level and adaptive period for each EMA Vol Volatility Volume-weighted volatility measure Entropy Market randomness level (0 = trending, 1 = random) Volume Strength Current volume relative to average Learning Rate How quickly the system adapts (higher = faster adaptation) Trading Applications Trend Following: EMAs aligned in order (1 > 2 > 3 > 4) = Strong uptrend EMAs aligned reversed = Strong downtrend Use EMA 4 as major trend filter Entry Signals: Fast EMA crosses medium EMA in trend direction Price pullback to EMA 3 in trending regime All EMAs converging in ranging regime Exit Signals: Fast EMA crosses below medium EMA Regime change (background color shift) Silhouette score drops (poor quality) Regime-Based Strategy: Green Background: Range trading, fade extremes Blue Background: Trend following, ride momentum Red Background: Reduce position size, wait for clarity Gray Background: Cautious, potential regime shift Advantages Over Standard EMAs Automatic Adjustment: No manual tweaking needed for different markets Context Aware: Understands if market is trending, ranging, or volatile Volume Integration: Respects institutional involvement Multi-Factor Analysis: Uses 12 indicators, not just price Quality Metrics: Silhouette score shows when to trust signals Non-Repainting: Reliable for backtesting and live trading Best Practices Do: Wait for bar close before acting on signals Check Silhouette score (>0.2 is reliable) Use regime color as risk filter Combine with your trading system Don't: Trade against EMA 4 in strong trends Ignore regime changes Use in extremely low liquidity Expect perfection in all conditions Summary This is an intelligent, self-adjusting EMA system that reads 12 different market characteristics to automatically optimize its speed. It identifies whether the market is trending, ranging, volatile, or transitional, then adjusts all four EMAs accordingly. The non-repainting design ensures historical accuracy, while the quality metrics (Silhouette score, regime strength) tell you when to trust the signals most.
Pine Script® indicator
by akhlaque16g55
ShooterViz Lazy Trader EMA SystemShooterViz Lazy Trader EMA System - Complete User Guide What This Script Does This is a position scaling indicator that tells you exactly when to enter, add to, and exit trades using a simplified 5-EMA system. It removes the guesswork and decision fatigue from trading by giving you clear visual signals. The Core Concept 3 entry signals that build your position from 20% → 50% → 100% 2 exit signals that scale you out at 50% → 50% (complete exit) 1 higher timeframe filter that keeps you on the right side of the trend No Fibonacci calculations, no RSI divergence, no multi-indicator confusion. Just EMAs and price action. What You'll See On Your Chart 1. Colored EMA Lines Blue Lines (Entry Zone): 3 EMA (lightest blue) - Early reversal detector 5 EMA (darker blue) - Confirmation line Green Lines (Add Zone): 21 EMA (bright green) - First add location 34 EMA (lighter green) - Final add location Red Lines (Exit Zone): 89 EMA (lighter red) - First exit trigger 144 EMA (darker red) - Final exit trigger Orange Lines (Hyper Frame - optional): Hyper 21 EMA (from higher timeframe) - Trend direction Hyper 34 EMA (from higher timeframe) - Bias confirmation 2. Triangle Signals Green Triangles (Below Price) = BUY/ADD: Lime triangle with "20%" = Entry 1: Price reclaimed 3→5 EMA (starter position) Green triangle with "30%" = Entry 2: Price bounced off 21 EMA (first add) Teal triangle with "50%" = Entry 3: Price broke out from 34 EMA compression (final add) Red Triangles (Above Price) = SELL: Orange triangle with "50% OFF" = Exit 1: Price broke below 89 EMA (take half off) Red triangle with "EXIT ALL" = Exit 2: Price broke below 144 EMA (close remaining position) 3. Background Color (Trend Bias) Light green background = Hyper frame EMAs trending up (bias LONG) Light red background = Hyper frame EMAs trending down (bias SHORT) Gray background = Neutral/choppy (be cautious) 4. Info Table (Top Right Corner) A live status dashboard showing: Which entry signals are currently active (✓ or —) Which exit signals are currently active (⚠ or ⛔) Current hyper frame bias (🟢 LONG / 🔴 SHORT / ⚪ NEUTRAL) Which timeframe you're using for hyper frame filtering How to Install and Set Up Step 1: Add the Script to TradingView Open TradingView Click "Pine Editor" at the bottom of the screen Copy the entire script code Paste it into the Pine Editor Click "Add to Chart" Step 2: Configure Your Settings Click the gear icon ⚙️ next to "LazyEMA" in your indicators list. Critical Settings to Configure: Hyper Frame Selection (Most Important!) Location: "Hyper Frame (Pick ONE)" section Setting: "Timeframe" What to choose: Trading 15min or 1H charts? → Use "240" (4-hour) Trading 4H or Daily charts? → Use "D" (Daily) Trading Daily or Weekly charts? → Use "W" (Weekly) Why this matters: This filter keeps you aligned with the bigger trend. Only take longs when this timeframe is green, shorts when it's red. MA Type (Optional, default is fine) Location: "MA Config" section Default: EMA (recommended) Options: EMA, SMA, WMA, HMA, RMA, VWMA Most traders should stick with EMA Visual Toggles (Customize your view) Entry Zone: Turn individual EMAs on/off (3, 5, 21, 34) Exit Zone: Turn individual EMAs on/off (89, 144) Hyper Frame: Toggle the higher timeframe EMAs on/off Step 3: Clean Up Your Chart Turn OFF these if visible: Volume bars (they clutter the view) Any other indicators you have loaded Grid lines (optional, but cleaner) Keep ONLY: Price candles Your ShooterViz Lazy Trader EMA System Maybe support/resistance levels if you manually draw them How to Trade With This Script The Basic Workflow Before the Market Opens: Check the background color and info table bias Green background? Look for LONG setups only Red background? Look for SHORT setups only Gray background? Stay flat or trade small During the Trading Session: LONGS (When hyper frame is bullish): Wait for Entry 1 signal: Lime triangle appears with "20%" Price has reclaimed the 5 EMA after dipping to 3 EMA Action: Enter 20% of your intended position Stop loss: Place below the 5 EMA or recent swing low Wait for Entry 2 signal: Green triangle appears with "30%" Price pulled back to 21 EMA and bounced Action: Add 30% more (you're now at 50% total) Move stop: Trail it up to below 21 EMA Wait for Entry 3 signal: Teal triangle appears with "50%" Price compressed at 34 EMA and broke out Action: Add final 50% (you're now 100% loaded) Move stop: Trail it up to below 34 EMA Wait for Exit 1 signal: Orange triangle appears with "50% OFF" Price broke below 89 EMA Action: Exit 50% of your position immediately Move stop on rest: Trail to 89 EMA or lock in profits Wait for Exit 2 signal: Red triangle appears with "EXIT ALL" Price broke below 144 EMA Action: Exit remaining 50% (you're now flat) Or: Stop gets hit at 89 EMA (same result) SHORTS (When hyper frame is bearish): Same process, but inverted Triangles appear above price instead of below Look for breakdowns below EMAs instead of bounces off them Exit when price reclaims 89 and 144 EMAs Real-World Example Walkthrough Setup: Trading ES (S&P 500 Futures) on 1H Chart Chart Configuration: Timeframe: 1 Hour Hyper Frame: 240 (4-hour) Ticker: ES Pre-Market Check: Background is light green Info table shows "🟢 LONG" for Hyper Bias Decision: Only look for long entries today 9:30 AM - Market Opens Price dips and touches 3 EMA Watch for: Reclaim of 5 EMA 9:45 AM - Entry 1 Triggers Lime triangle appears below bar Price closed above 5 EMA at $4,550 Action taken: Enter long 20% position (2 contracts if targeting 10 total) Stop loss at $4,545 (below 5 EMA) Risk: $10 per contract × 2 = $20 risk 10:30 AM - Entry 2 Triggers Price rallied to $4,565, pulls back Green triangle appears at 21 EMA ($4,555) Action taken: Add 30% (3 more contracts, now have 5 total) Move stop to $4,550 (below 21 EMA) Current P/L: +$25 ($5 gain on original 2 contracts, break-even on new 3) 11:15 AM - Entry 3 Triggers Price consolidates at 34 EMA around $4,560 Teal triangle appears as price breaks to $4,568 Action taken: Add final 50% (5 more contracts, now have 10 total) Move stop to $4,555 (below 34 EMA) Current P/L: +$70 1:00 PM - Price Extends Price rallies to $4,595 (on track) 89 EMA is at $4,575 No action yet, let it run 2:15 PM - Exit 1 Triggers Price pulls back from $4,600 Orange triangle appears as price breaks below 89 EMA at $4,580 Action taken: Exit 50% (5 contracts closed at $4,580) Keep 5 contracts with stop at 89 EMA ($4,575) Banked: +$150 average gain on closed 5 contracts 2:45 PM - Exit 2 Triggers Price continues down Red triangle appears as price breaks 144 EMA at $4,570 Action taken: Exit remaining 5 contracts at $4,570 Banked: +$100 on remaining 5 contracts Final Results: Total gain: $250 on the trade Initial risk: $50 (if stopped out at Entry 1) Risk/Reward: 5:1 Time in trade: ~5 hours Common Questions "What if I miss Entry 1? Can I still take Entry 2?" Yes! Each entry is independent. If you miss the 3→5 reclaim, wait for the 21 EMA bounce. You'll start with a 30% position instead of 20%, but that's fine. Rule: Never chase. Wait for the next EMA setup. "What if multiple entry signals trigger at the same bar?" Rare, but possible. If you see both Entry 1 and Entry 2 trigger together: Take Entry 1 first (20%) If the next bar confirms Entry 2 is still valid, add 30% When in doubt, scale in gradually "The hyper frame is green but I'm seeing short signals?" Don't take them. The hyper frame is your bias filter. If it says "go long," ignore short setups. They're usually lower probability and will get stopped out. "Can I use this for swing trading overnight?" Absolutely. Just switch your hyper frame: If you're on Daily charts, use Weekly hyper frame If you're on 4H charts, use Daily hyper frame Adjust position sizes for overnight risk "What if the signal appears right at market close?" Don't chase it. Wait for the next bar (next day) to confirm. Signals that appear in the last 5 minutes are often noise. "How do I set up alerts?" Right-click on the chart Select "Add Alert" Choose "LazyEMA" from the condition dropdown Select which signal you want alerts for: Entry 1: 3→5 Reclaim Entry 2: 21 EMA Add Entry 3: 34 EMA Breakout Exit 1: 89 EMA Break Exit 2: 144 EMA Break Click "Create" Pro tip: Set up all 5 alerts so you never miss a signal. Position Sizing Guide see swingtradenotes.substack.com Critical Rule: Know your total risk BEFORE you take Entry 1. Don't wing it. Customization Tips For Day Traders (Scalpers) Use 5min or 15min charts Hyper frame: 1H or 4H Expect 2-4 setups per day Tighter stops (0.5% risk per entry) For Swing Traders Use 4H or Daily charts Hyper frame: Daily or Weekly Expect 1-2 setups per week Wider stops (1-2% risk per entry) For Position Traders Use Daily or Weekly charts Hyper frame: Weekly or Monthly Expect 1-2 setups per month Widest stops (2-3% risk per entry) The "Don't Be Stupid" Checklist Before taking ANY signal from this script, ask: ✅ Is the hyper frame bias pointing in my direction? ✅ Is the signal clean (not at a weird time or during news)? ✅ Do I know my stop loss level? ✅ Do I know my position size? ✅ Can I afford to lose if this trade fails? If you answered "no" to ANY of these, skip the trade. Troubleshooting "I'm not seeing any signals" Possible causes: The "Show Lazy Trader System" toggle is off (turn it on) Your chart timeframe is too high (try 1H or 4H) Market is in a tight range (EMAs are compressed) You need to refresh the chart "Too many signals, getting whipsawed" Fixes: Increase your chart timeframe (go from 15m to 1H) Switch to a less volatile ticker Only trade when hyper frame bias is STRONG (not neutral) Add a minimum bar count between signals "The info table is covering my price action" Fix: Edit the script Find the line: table.new(position.top_right, ... Change position.top_right to position.bottom_right or position.top_left "Signals appear then disappear" This is normal (repainting). Some signals (especially compression breakouts) can disappear if the next bar reverses. This is why you: Wait for bar close before acting Use alerts that only fire on confirmed bars Don't chase signals mid-bar Final Thoughts This script is a decision-making tool, not a crystal ball. It shows you high-probability setups based on EMA dynamics and trend structure. You still need to: Manage your risk Choose your position size Stick to the rules Accept losses when they happen The system works when YOU work the system. Print this guide, tape it next to your monitor, and follow it religiously for 20 trades before making ANY changes. Good luck, and stay lazy (the smart way).
Pine Script® indicator
by SwingTradeNotes
Triple ATR Adaptive MAs + VWAP Option + Clouds + Candle Trend V2Another one of my experiences ... combining things... 📘 Indicator Description – Triple ATR Adaptive Moving Averages with VWAP Influence This indicator plots three adaptive moving averages whose behavior changes dynamically based on market volatility (ATR) and optionally VWAP deviation. Because they adapt in real time to both volatility and VWAP pressure, their movement, slope, and reaction speed differ significantly from traditional moving averages. 🔶 1. ATR-Adaptive Moving Averages Each of the three MAs uses a custom adaptive formula: ATR (Average True Range) is measured over a chosen period. Higher ATR → more volatility → the MA becomes more reactive and moves closer to price. Lower ATR → stable market → the MA becomes smoother and slower. This creates a volatility-aware smoothing factor, making the MA expand, contract, and respond to market conditions in ways a classic SMA, EMA, or HMA cannot. 🔷 2. Optional VWAP Influence Each MA has an independent toggle allowing it to be influenced by VWAP. When enabled: The MA is gently “pulled” toward VWAP. The strength of this attraction is determined by the VWAP Influence parameter (0–1). This causes the moving averages to behave differently from normal MAs: In trending markets, the ATR and price push the MA away from VWAP. In mean-reverting or balanced conditions, VWAP pulls the MA back toward fair value. The result is an MA that reflects both trend pressure and fair-value pressure. 🔶 3. Visual Behavior: Non-Traditional Movement Because each MA is simultaneously influenced by volatility, trend magnitude, and VWAP deviation, their shape is often very distinct from normal moving averages. They may: Respond faster during high volatility Flatten out earlier during consolidation Curve toward VWAP when price becomes extended Separate or compress depending on ATR strength This is intentional and essential, since the goal is to show: ✔ Volatility expansion ✔ Trend exhaustion ✔ Overextended price relative to VWAP ✔ Dynamic trend confirmation Rather than simply smoothing past price. 🔷 4. Three Independent Adaptive Lines Each of the three moving averages has: Its own ATR length Its own sensitivity multiplier Its own optional VWAP influence Its own color and trail This allows the user to combine: a fast volatility-adaptive trend line a mid-range adaptive baseline a slow adaptive long-trend MA All adapting independently to volatility and VWAP conditions. 🔶 5. Optional Candle Coloring The indicator can color candles according to trend strength derived from the fast/slow MAs. Stronger trends produce more vivid colors. Neutral or conflicting trends produce softer colors. This adds a visual layer to identify: Trend direction Trend strength Volatility state Market compression at a glance. 📌 Summary This indicator does not behave like standard SMAs or EMAs because each line dynamically adapts to: 🔸 ATR (volatility) 🔸 VWAP (fair value) This makes the indicator extremely responsive to market conditions while still reducing noise during stable phases. It provides a more realistic, context-aware, and intelligent representation of price behavior compared to traditional moving averages.
Pine Script® indicator
by ueuito
Tamil | MTF DashboardThe Tamil | MTF Dashboard is a powerful multi-timeframe (MTF) market strength and trend-bias analyzer designed to give traders a fast, at-a-glance understanding of market conditions across 7 timeframes. This dashboard consolidates essential indicators into a clean table plus a dynamic bias label that updates live with the chart timeframe. ⸻ ✅ What This Dashboard Shows 1. RSI (Multi-Timeframe) • Uses custom color logic: • Green: RSI > 55 • Red: RSI < 45 • Gray: Neutral zone (45–55) • Quickly identifies momentum shifts across multiple timeframes. 2. Stochastic (Multi-Timeframe) • Values clamped to 0–100 • Color-coded: • Oversold (<20): Green • Overbought (>80): Red • Neutral: Gray 3. Supertrend Direction • Returns Buy / Sell / Neutral per timeframe • Color-coded trend bias for quick directional confirmation. 4. Moving Average Trend (SMA or EMA) • Choose between SMA or EMA • Shows whether price is above/below MA • Above MA → Bullish (Buy) • Below MA → Bearish (Sell) 5. Combined Score (-4 to +4) A powerful numeric sentiment summarizing 4 trend components: • RSI score • Stochastic score • Supertrend score • MA trend score Each indicator contributes -1, 0, or +1, giving a total score: • +2 to +4 = Bullish • -2 to -4 = Bearish • Between -1 and +1 = Neutral Includes Trend Strength: • Very Weak • Weak • Moderate • Strong All shown inside the Score cell per timeframe. ⸻ 📌 Bias Label (Chart Timeframe Only) Displays real-time information for the active chart timeframe: • Bias (Bullish / Bearish / Neutral) • Combined Score • ATR value • ADX value (0–100, DI-based calculation) Perfect for gauging trend strength without cluttering the chart. ⸻ 🧩 Supported Timeframes The dashboard updates the following timeframes simultaneously: • 1m, 3m, 5m, 15m, 1H, 4H, 1D ⸻ 🎯 Designed For • Intraday traders • Swing traders • Scalpers • Multi-timeframe analysts • Traders who want instant visual confirmation of market strength ⸻ ⭐ Why This Dashboard Is Unique • True multi-timeframe aggregation • Custom, realistic scoring engine • Accurate ADX (0–100) matching textbook DI calculation • Clean color logic for fast interpretation • Zero repainting (uses standard indicators + request.security) • Works on any market: Stocks, Crypto, Forex, Futures
Pine Script® indicator
by haimpts
Weekly Moving Average50, 21, 200 & Daily 200This indicator plots key higher-timeframe moving averages on any chart: Weekly 50 SMA (orange) – medium-term trend guide. Weekly 21 EMA (lime) – faster trend and pullback zone. Weekly 70 EMA (pink/purple) – swing trend and “deeper dip” buy/sell area. Weekly 200 & 300 SMA (red / blue) – long-term bull/bear lines and major support/resistance. Daily 200 SMA (yellow) – classic trend filter for shorter-term trades. By overlaying weekly and daily MAs on the same chart, this tool helps you quickly see where price is in relation to major trend levels, potential support/resistance zones, and areas of confluence for entries, take-profits, or invalidation levels. Use it to keep your lower-timeframe trades aligned with the higher-timeframe structure. This is a visual tool for market context only, not financial advice.
Pine Script® indicator
by SM2K
Vassago & Tesla Ex-Machina 197 45 21 [Hakan Yorganci]Vassago & Tesla Ex-Machina 197 45 21 "Any sufficiently advanced technology is indistinguishable from magic." — Arthur C. Clarke 🌑 The Genesis: Algorithmic Esotericism This script is not merely a technical indicator; it is a digital artifact born from the convergence of Software Engineering and Hermetic Tradition. As a developer and researcher dedicated to "Technomancy"—the study of applying esoteric logic to computational systems—I designed this algorithm using a custom, experimental programming environment I am currently developing. My goal was to move beyond standard, arbitrary financial inputs (like the default 200 SMA or 14 RSI) and instead derive parameters based on Universal Harmonics and Historical Archetypes. This indicator, Ex-Machina, is the result of that transmutation. It applies ancient numeric precision to modern market chaos. 🔢 Decoding the Protocol: 197 - 45 - 21 Why these specific numbers? They were not chosen randomly; they were calculated through specific harmonic reductions to filter out market noise. 1. The Harmonic Trend (Tesla Protocol) * The Logic: Standard analysis uses the 200-period Moving Average simply out of habit. However, applying Nikola Tesla’s 3-6-9 vibrational principles, the engine reduced the period to 197. * The Numerology: 1+9+7 = 17 \rightarrow 1+7 = \mathbf{8}. In esoteric numerology, 8 represents infinite power, authority, and financial flow. This creates a baseline that aligns more organically with market accumulation than the static 200. 2. The Hidden Dip (Solomonic Sight) * The Archetype: Based on the attributes of Vassago, the archetype of discovering "hidden things," the algorithm identified 45 as the precise threshold for a "Sniper Entry." * The Function: Unlike the standard 30 RSI, this level identifies the exact moment a correction matures within a bullish trend—catching the dip before the crowd returns. 3. The Prophetic Vision * The Logic: Using the Fibonacci Sequence, the indicator projects the support line 21 bars into the future. * The Utility: This allows you to visualize where the support will be, granting you foresight before price action arrives. ⚖️ The Dual Mode Engine: Sealed vs. Living Respecting the user's will, I have engineered this script as a Hybrid System. You can choose how the "spirit" of the code interacts with the market via the settings menu. 1. The Sealed Ritual (Default - Unchecked) * Philosophy: "Trust in the Constants." * Behavior: Strictly adheres to the 197 SMA and 45 RSI. * Visual: Displays a Blue Trend Line. * Best For: Traders who value stability, long-term trends, and the unyielding nature of harmonic mathematics. 2. The Living Spirit (Adaptive Mode - Checked) * Philosophy: "As the market breathes, so does the code." * Behavior: * Transmutation: The trend line shifts from a Simple Moving Average (SMA) to an Exponential Moving Average (EMA 197) for faster reaction. * Adaptive Volatility: The RSI entry level (45) becomes dynamic. It expands and contracts based on ATR (Average True Range). In high volatility, it demands a deeper dip to trigger a signal, protecting you from fake-outs. * Visual: Displays a Fuchsia (Pink) Trend Line. * Best For: Volatile markets (Crypto/Forex) and traders who want the algorithm to "sense" the fear and greed in the air. ⚙️ How to Trade * Timeframe: Optimized for 4H (The Builder) and 1D (The Architect). * The Signal: Wait for the "EX-MACHINA ENTRY" label. This signal manifests ONLY when: * Price is holding above the 197 Harmonic Trend. * Momentum crosses the Optimized Threshold (45 or Adaptive). * Trend Strength is confirmed via ADX. Author's Note: I built this tool for those who understand that code is the modern spellbook. Use it wisely, risk responsibly, and let the harmonics guide your entries. — Hakan Yorganci Technomancer & Full Stack Developer
Pine Script® indicator
by hknyrgnc
2
EMA Crossover CandlesEMA Crossover Candles This indicator colors your chart candles based on the relationship between two Exponential Moving Averages (EMAs). How It Works Green Candles - When the Fast EMA is above the Slow EMA, indicating bullish momentum Red Candles - When the Fast EMA is below the Slow EMA, indicating bearish momentum Settings Source - The price data used for EMA calculations (default: close) Fast Length - Period for the fast EMA (default: 5) Slow Length - Period for the slow EMA (default: 10) How To Use This indicator provides a quick visual reference for trend direction. Green candles suggest the short-term trend is bullish, while red candles suggest bearish conditions. This can help you: Identify trend direction at a glance Filter trades in the direction of the trend Spot potential trend changes when candle colors shift Tips Adjust the Fast and Slow Length settings to match your trading timeframe Shorter periods = more responsive but more false signals Longer periods = smoother but slower to react to trend changes Consider hiding default candles in Chart Settings for a cleaner look Note: This indicator is for informational purposes only and should not be used as the sole basis for trading decisions. Always use proper risk management and consider combining with other forms of analysis. Feel free to modify this to match your style or add any additional details you'd like to include.Claude is AI and can make mistakes. Please double-check responses. Opus 4.5
Pine Script® indicator
by GraCB
Setup Keltner Banda 3 e 5 - MMS + RSI + Distância Tabela 📊 Indicator Overview: Keltner Bands + RSI + Distance Table This custom TradingView indicator combines three powerful tools into a single, visually intuitive setup: Keltner Channels (Bands 3x and 5x ATR) Relative Strength Index (RSI) Dynamic Table Displaying RSI and Price Distance from Moving Average (MMS) 🔧 Components and Functions 1. Keltner Channels (3x and 5x ATR) Based on a Simple Moving Average (MMS) and Average True Range (ATR). Two sets of bands are plotted: 3x ATR Bands: Used for moderate volatility signals. 5x ATR Bands: Used for high volatility extremes. Visual fills between bands help identify overextended price zones. 2. RSI (Relative Strength Index) Measures momentum and potential reversal zones. Customizable overbought (default 70) and oversold (default 30) levels. RSI values are color-coded in the table: Green for RSI ≤ 30 (oversold) Blue for 30 < RSI ≤ 70 (neutral) Red for RSI > 70 (overbought) 3. Distance Table (Price vs. MMS) Displays the real-time distance between the current price and the MMS: In points (absolute difference) In percentage (relative to MMS) Helps traders assess how far price has deviated from its mean. 📈 How to Use Trend Reversal Signals Look for price crossing back inside the 3x or 5x Keltner Bands. Confirm with RSI: RSI > 70 + price re-entering from above = potential short RSI < 30 + price re-entering from below = potential long Volatility Zones Price outside the 5x band indicates extreme movement. Use this to anticipate mean reversion or breakout continuation. Table Insights Monitor RSI and price distance in real time. Use color cues to quickly assess momentum and stretch. ⚙️ Customization Adjustable parameters for: MMS period ATR multipliers RSI period and thresholds Table position on chart Fill colors between bands This indicator is ideal for traders who want a clean, data-rich visual tool to track volatility, momentum, and price deviation in one place.
Pine Script® indicator
by rodrigodearantes
Trade Setup A+ [v.8 Fixed Lines]🚀 Trade Setup A+ : Liquidity Hunter System (XAUUSD) This indicator is an "All-in-One" trading system designed specifically for XAUUSD (Gold) Scalping and Swing trading. It combines Smart Money Concepts (SMC) with Price Action to identify high-probability setups by tracking liquidity pools and institutional order blocks. 💎 Key Features (v.8 Updated): Auto Order Blocks (Clean View): Automatically detects and draws Bullish (Green) and Bearish (Red) Order Blocks based on swing points. Clean Look: Limits display to the last 5 active zones to keep the chart clutter-free. Liquidity Levels (Fixed Lines): D-High / D-Low: Thin lines representing Previous Day’s High & Low. W-High / W-Low: Thick lines representing Previous Week’s High & Low (Strong Support/Resistance). Dual Entry Signals: Method 1 (Sniper): Shows a Diamond Icon (💎) when price touches an Order Block zone (Reversal setup). Method 2 (Follow): Shows a Triangle Arrow (🔼/🔽) when price crosses EMA 14 with trend confirmation from EMA 49. Macro Time Zones: Highlights high-volume trading sessions (Asia, London, NY) on the background to identify "Killzones". 📈 How to Trade: BUY Signal: Look for a Green Diamond (Touch OB) or Green Triangle (Price > EMA 14 & 49). SELL Signal: Look for a Red Diamond (Touch OB) or Orange Triangle (Price < EMA 14). Best Time: Trade when signals align with highlighted Macro Time zones. ⚠️ Disclaimer: This tool is for educational purposes only. Always use proper risk management. 🚀 Trade Setup A+ : ระบบเทรดล่าสภาพคล่อง (สำหรับทองคำ) อินดิเคเตอร์ชุดนี้ออกแบบมาเพื่อเทรด XAUUSD (ทองคำ) โดยเฉพาะ ผสมผสานเทคนิค SMC (Smart Money Concepts) และ Price Action เพื่อหาจุดเข้าที่มีความแม่นยำสูง (High Probability) โดยเน้นการดักจับสภาพคล่องของรายใหญ่ค่ะ 💎 ฟีเจอร์หลัก (อัปเดตล่าสุด v.8): Auto Order Blocks (แบบคลีน): สร้างกล่องโซนซื้อขาย (Supply/Demand) ให้อัตโนมัติ (สีเขียว = โซน Buy, สีแดง = โซน Sell) Clean Look: ระบบจะโชว์เฉพาะ 5 กล่องล่าสุดเท่านั้น เพื่อไม่ให้กราฟรกสายตา Liquidity Levels (เส้นแนวรับต้าน): D-High / D-Low: เส้นบาง แสดงราคาสูงสุด/ต่ำสุดของ "เมื่อวาน" (Day) W-High / W-Low: เส้นหนา แสดงราคาสูงสุด/ต่ำสุดของ "สัปดาห์ที่แล้ว" (Week) ซึ่งเป็นแนวรับต้านที่แข็งแกร่ง สัญญาณเข้าเทรด 2 แบบ (Dual Signals): วิธีที่ 1 (Sniper): แสดงรูป เพชร (💎) เมื่อราคาวิ่งชนขอบกล่อง Order Block (ดักจุดกลับตัวปลายไส้) วิธีที่ 2 (Follow Trend): แสดงรูป ลูกศรสามเหลี่ยม (🔼/🔽) เมื่อราคาตัดเส้น EMA ตามเงื่อนไข (Buy ต้องยืนเหนือ EMA 14 และ 49) Macro Time (ช่วงเวลาทำเงิน): ระบายสีพื้นหลังบอกช่วงเวลาที่ตลาดวิ่งแรง (Asia, London, NY) เพื่อให้โฟกัสถูกจุด 📈 วิธีใช้งาน: ขา BUY: รอสัญญาณ เพชรสีเขียว (ชนกล่องรับ) หรือ ลูกศรเขียว (ตามเทรนด์) ขา SELL: รอสัญญาณ เพชรสีแดง (ชนกล่องต้าน) หรือ ลูกศรส้ม (ตามเทรนด์) คำแนะนำ: ประสิทธิภาพสูงสุดเมื่อสัญญาณเกิดในช่วงเวลา Macro Time (แถบสีพื้นหลัง)
Pine Script® indicator
by BuntitaPrommolmas
KIMATIX VWAP/EMA System (by ASCE)**KIMATIX VWAP/EMA System (by ASCE)** A precision-built intraday framework for momentum, structure, and liquidity timing. **Why this indicator exists** Most traders see movement, but not context. They enter too late, chase momentum, or fade reversals without understanding where institutional players react. This tool solves that problem by combining two of the most powerful structural concepts in intraday price discovery: Trend alignment through EMAs Liquidity reaction zones through VWAPs Together, they provide directional clarity, timing, and trade location. **Core Components** **Three Trend EMAs** • **EMA 7** – Microtrend and momentum speed • **EMA 23** – Intraday trend leadership • **EMA 50** – Higher-timeframe structure anchor This trio shows how price accelerates, slows, flips bias, or compresses. **Three Volume-Weighted Average Prices** • **Daily VWAP** – Primary scalper reference point • **Weekly VWAP** – Bias filter and intermediate balance zone • **Monthly VWAP** – High-impact “magnet” where major reactions occur VWAP represents the fair value where volume is distributed. When price taps, rejects, or reclaims these levels, liquidity flow shifts — ideal for scalp-to-swing entries. **What it helps you see** • When price is aligned with or diverging from trend • Where momentum will expand or fail • Which levels larger participants defend • Where the highest-probability reaction zones form This is not a signal tool — it is a structure and decision-making framework used by professional intraday traders. **How to use it** 1. **Trade with VWAP alignment** – expect reactions at daily/weekly/monthly VWAPs 2. **Follow EMA flow** – when EMAs compress or flip, momentum changes 3. **Look for price interaction** – rejection, reclaim, or breakthrough of a VWAP often leads to fast moves Ideal for scalping, day-trading, futures, FX, indices, crypto, and metals. **Customization** Colors for each EMA and each VWAP can be personalized, allowing alignment with your charting workflow. **Final Notes** This system gives you the *context* most traders miss — where trend meets liquidity. Use it as a roadmap to understand where price *should* react and when momentum is likely to shift.
Pine Script® indicator
by kimatixtrading