3 MA Smart Money System v6 (No Repaint)✅ INDICATOR SPECIFICATIONS
🎯 Moving Average Type
SMA – Simple Moving Average
EMA – Exponential Moving Average
HMA – Hull Moving Average
🔥 Complete Features
✔ 3 moving averages in 1 indicator
✔ SMA/EMA/HMA options
✔ Turn each moving average on/off
✔ Multi-Timeframe (MTF)
✔ Auto Color Trend
✔ MA labels on the chart
✔ Alerts for all moving average combinations
✔ Color fill between moving averages (trend zones)
✔ Automatic MA crossover strategy (Buy/Sell)
✔ Smart Money + Moving Average (major trend filter)
✔ Moving average as automatic support & resistance
✔ NO REPAINT (safe for backtesting & live use)
🧠 SYSTEM LOGIC
MA 3 = Smart Money MA (main trend)
BUY
MA1 crosses UP MA2
Price above MA3
SELL
MA1 MA2 crosses down
Price below MA3
The MA3 zone is considered dynamic support/resistance.
Created by Dr. Trade
Moving Averages
Minervini TT + IBD RS + ENTRY What this script does (overall)
This indicator implements a Minervini-style stock selection and entry system with mechanical risk control:
Trend Template (TT)
Uses 50 / 150 / 200 SMA alignment
Requires price to be above key moving averages
Ensures the stock is sufficiently above its 52-week low and not too far from its 52-week high
Relative Strength (IBD-style proxy vs TOPIX)
Compares the stock’s performance against TOPIX
Requires RS to be rising and making new relative highs
Detects RS breakdowns as “no-add / exit watch” warnings
ENTRY conditions (Pivot + Volume + VCP)
Breakout above a pivot high
Volume expansion on breakout
Volatility contraction using ATR% (VCP-like behavior)
Visual signals
BUY label: quality conditions pass
ENTRY label: valid breakout entry
RS BREAK label: relative strength deterioration
What was newly added / updated (important)
🔴 Mechanical stop-loss logic (NEW)
After each ENTRY signal, the script now:
Draws two horizontal stop-loss lines
SL -5% from the ENTRY bar’s high
SL -8% from the ENTRY bar’s high
Lines extend to the right automatically
Detects stop-loss touches
When price (low or close, configurable) crosses below:
SL -5% → SL5 trigger
SL -8% → SL8 trigger
Displays an upward arrow on the bar where each SL is touched
Sends alerts with fixed (const) messages
Handles multiple trades cleanly
If a stop-loss was hit and a new ENTRY appears later:
The previous SL lines are grayed out and dotted
Past exit markers (arrows) remain visible
Prevents inconsistent calculations by evaluating crossunders on every bar
👉 This enables fully mechanical, Minervini-style loss control without discretionary judgment.
MTF EMA + MACD Single Signal Line (Enhanced)zerodha intraday trading strategy with 3 inbuilt indicators like ema, macd. 25 ema in 1 hour timeframe and 25 ema in 5 min timeframe and 15 min macd for better direction forecast
HMA Velocity OscMomentum oscillator based on the delta of the low-lag Hull Moving Average (HMA).
Best used by swing traders as a supporting tool alongside support–resistance levels, fibonacci and chart patterns.
Simple Moving Average FibonacciIndicator with customizable lines representing the SMA (Simple Moving Average) calculated on the numbers of the Fibonacci sequence (5, 8, 13, 21, 34, 55, 89, 144, 233, 677, 610, 987)
VWAP-Y&TThis Indicator shows VWAP for Today and Previous Day (Yesterday), calculates Moving Average with Volume consideration.
Kind of ATP of Today and also ATP of yesterday so helps us make better decision as to where the price is today in comparison to previous days...
XAUUSD Gold 5-Min Scalping Indicator⚡ XAUUSD 5-Min Scalping Strategy — Moving Average + Engulfing Confirmation
This professionally coded TradingView strategy is built for Gold scalpers who want clean, rule-based entries without repainting. It combines a triple moving average trend filter, engulfing confirmation logic, and RSI divergence exits to create a structured, repeatable system for XAUUSD on 5-minute charts.
🔗 Source & Inspiration
This system is inspired by the educational breakdown by "The Moving Average".
All conceptual credit belongs to the original creator.
Video reference:
youtu.be
This listing provides a fully enhanced and expanded version of that concept, coded into a complete TradingView indicator/strategy with TP/SL modules, alerts, divergence exits, multi-style risk management, and full Pine Script source code.
This listing provides two complete TradingView scripts:
✅ Version 1 — Indicator (Signals + Alerts Only)
Buy/Sell signals based on trend + engulfing confirmation
No TP/SL engine
Includes full alert functionality
Perfect for automation with trading bots (3Commas, PineConnector, Tickerly)
Ideal if you want to plug signal-only logic directly into a bot or copy-trading workflow
✅ Version 2 — Strategy (Backtest + TP/SL Engine)
Full strategy framework with ready-made Take Profit & Stop Loss modules
Includes break-even, trailing stops, ATR exits, RSI divergence exits
Plots entry, TP, SL lines on chart
Provides detailed backtesting, optimization, and forward-testing
Best for refined strategy development and statistical testing
📌 Both versions are included with your purchase to give complete flexibility—
signal-only automation + full TP/SL backtesting.
💡 How It Works
The system uses a multi-layer confirmation approach. First, trend direction is determined using the 21/50/200 moving averages with a built-in minimum spread filter to avoid choppy markets. Then, it detects a 3-line strike pattern followed by a strong engulfing candle that covers a configurable percentage of the previous range. Only when all trend and price-action rules align does the system generate a Buy or Sell signal. Optional RSI divergence logic can be used to exit early when reversal pressure forms.
🟢 Long Setup
Uptrend confirmed by MA 21 > MA 50 > MA 200
MA spread above threshold to avoid sideways noise
Three consecutive bearish candles
A bullish engulfing candle covering a user-defined percentage
→ System triggers a Buy signal on bar close
🔴 Short Setup
Downtrend confirmed by MA 21 < MA 50 < MA 200
MA spread above threshold to ensure clear trend
Three consecutive bullish candles
A bearish engulfing candle covering a user-defined percentage
→ System triggers a Sell signal on bar close
🔥 Why Traders Love This Dual-Version System
✔️ Version 1 (Indicator):
Clean BUY/SELL signals
Zero repaint
Alerts for bots & automation
Plug-and-play for 3Commas, PineConnector, Tickerly, etc.
✔️ Version 2 (Strategy):
Built-in TP/SL engine
Trailing stop, ATR exits, break-even logic
Full visual TP/SL lines on chart
Perfect for real backtesting & optimization
✔️ Both Versions:
Engulfing + 3-line strike pattern detection
Trend filter with spread validation
RSI divergence detection (optional)
Non-repainting
Full source code included
Works on XAUUSD, Forex, Crypto, Indices, Metals
This tool gives structure, clarity, and scalable automation potential to your scalping workflow.
🧩 What Makes This Different
This isn’t a basic Moving Average crossover script. It blends price action (engulfing + 3-line strike) with a multi-MA trend filter, divergence detection, and a full risk-management engine. Everything is non-repainting, fully customizable, and forward-confirmed. It’s engineered for traders who prefer precision and clean logic, not flashy signals.
⚙️ Key Features
✔️ MA-Based Trend Filter with Spread Validation
✔️ Engulfing + 3-Line Strike Pattern Detection
✔️ RSI Divergence Engine (Regular + Hidden)
✔️ Multi-Mode TP/SL: Fixed, Trailing, Candle-Based, ATR, Break-Even
✔️ Full Visual Lines with TP/SL Fills on Chart
✔️ Triangle Entry Signals (BUY/SELL)
✔️ Time Range Filter for Backtesting
✔️ Alerts for automation (3Commas, PineConnector, Tickerly)
✔️ Source Code Included — No locks, no obfuscation
🎯 Perfect For
✅ Gold scalpers (5m timeframe)
✅ Trend + price action traders
✅ Traders who like engulfing continuation setups
✅ Algorithmic traders using TradingView alerts
✅ Anyone wanting a structured, rules-based approach
Works on Forex, Crypto, Indices, and Commodities with minor adjustments and testing.
💼 What You Receive
📁 Version 1 — Indicator (Signals + Alerts)
📁 Version 2 — Strategy (Backtesting + TP/SL)
📁 Full Pine Script Source Code (.txt)
♾ Lifetime access + updates
🛠 Compatibility
✔ TradingView (all plans)
✔ All markets and timeframes
✔ Automation platforms: PineConnector, 3Commas, Tickerly
✔ Optimized for XAUUSD 5 minute scalping
✔ 100% non-repaint logic
⚠️ Disclaimer
This tool is for educational and research purposes. Trading involves risk; always test thoroughly and use appropriate risk management.
Trading Decision Support IndicatorThis is a trading assistive indicator.
The strategy uses the 4-hour (4H) timeframe to determine the overall market direction, the 1-hour (1H) timeframe to identify the trend, and the 15-minute (15M) timeframe as the entry trigger.
This indicator is provided solely as a decision-support tool to speed up analysis and does not constitute any investment advice. Users must independently assess whether market conditions are suitable before entering a trade.
這是一套輔助買賣的指標 以4H大方向 1H趨勢 15M為進場點的策略
此指標僅供輔助加快判斷速度,不構成任何投資建議,仍須自行判斷是否適合進場
Phu's Dynamic Quarter Levels📌Phu’s Dynamic Quarter Levels is designed to visualize institutional price behavior using IPDA concepts.
It highlights dynamic quarter levels and key round numbers where Smart Money commonly places orders.
This indicator helps traders:
Identify potential reaction, pause, and target zones
Understand price expansion vs. distribution
Improve TP placement and directional bias
Best used with price action, market structure, and liquidity concepts (ICT / SMC / IPDA).
This is not a buy/sell signal, but a framework for reading institutional flow.
_______________________________________________________
🐯 Phu’s Dynamic Quarter Levels (IPDA Concept)
Phu’s Dynamic Quarter Levels is an indicator designed to help traders read institutional price behavior based on IPDA, ICT, and Smart Money concepts.
Markets do not move randomly. Institutional participants tend to execute large orders around round numbers, quarter levels (25%, 50%, 75%), and previous high/low reference points.
This indicator visualizes those key levels dynamically, adapting to current price structure instead of using fixed, static lines.
Key Features
Dynamic Quarter Levels
Automatically adjusts to price expansion and structure shifts.
Major Round Numbers
Highlights psychologically and institutionally significant price levels.
High / Low Reference Zones
Acts as liquidity pools and price magnets frequently targeted by Smart Money.
How to Use
This indicator is not a buy/sell signal. It is a context and framework tool.
Use it to:
Identify potential reaction, rejection, and consolidation zones
Anticipate profit-taking and distribution areas
Improve take-profit placement
Determine whether price is in expansion, accumulation, or distribution
Trading Applications
When price approaches a quarter level or round number, expect reduced momentum or reaction
Repeated rejection at the same level may indicate institutional accumulation or distribution
Best used in confluence with:
Market Structure
Liquidity Sweeps
Kill Zones
ICT / SMC price action models
Best For
ICT / IPDA / Smart Money traders
Traders who want to understand why price reacts at specific levels
Gold, Indices, and Major FX pairs
Disclaimer
This indicator is a decision-support tool, not financial advice.
Always apply proper risk management and price action confirmation.
🐯 Phu’s Dynamic Quarter Levels (IPDA Concept)
อินดิเคเตอร์นี้ถูกออกแบบมาเพื่อช่วย อ่าน Institutional Flow และพฤติกรรมการวางคำสั่งของ IPDA (Smart Money) โดยเน้นโครงสร้างราคาที่เคลื่อนไหวเป็นช่วง ๆ ตาม Quarter Levels และ Round Numbers
เหมาะสำหรับเทรดเดอร์ที่ใช้แนวคิด
ICT / SMC / IPDA / Liquidity-Based Trading
🔹 แนวคิดหลักของอินดี้
ตลาดไม่ได้เคลื่อนที่แบบสุ่ม แต่ สถาบัน (Institutional Traders) มักวางคำสั่งซื้อ–ขายไว้ที่
เลขกลม (Round Numbers เช่น 4900, 5000, 5100)
ระดับ Quarter (25%, 50%, 75%)
High / Low ของช่วงก่อนหน้า (Session / Quarter)
อินดิเคเตอร์นี้จะแสดงระดับราคาที่ มีโอกาสเป็นจุดพักราคา, จุดสะสมคำสั่ง และเป้าหมายการไหลของราคา
🔹 สิ่งที่อินดี้แสดงบนกราฟ
🔵 Quarter Levels แบบ Dynamic
ปรับตามโครงสร้างราคา ไม่ใช่เส้นตายตัว
🔹 Round Numbers สำคัญ
โซนที่ IPDA มักใช้เป็นจุด:
Rebalance
Distribution
Target ของ Move
🔸 High / Low Reference
ใช้เป็น Liquidity Pool และ Magnet ของราคา
🔹 วิธีใช้งาน (Practical Use)
อินดี้นี้ ไม่ใช่สัญญาณ Buy/Sell สำเร็จรูป
แต่ใช้ร่วมกับ Price Action และ Structure
ใช้เพื่อ:
หา Take Profit (TP) ที่มีนัยยะ
ประเมินว่า Move นี้ “ยังไปต่อ” หรือ “ใกล้จบ”
คาดการณ์จุด Reaction / Rejection
วาง Bias ว่าราคาอยู่ใน:
Expansion
Consolidation
Distribution
🔹 ตัวอย่างการใช้งาน
เมื่อราคาทะลุ High และ วิ่งเข้าหา Round Number / Quarter Level
→ ระวัง Profit Taking หรือ Fake Break
เมื่อราคา Reject ที่ Quarter เดิมซ้ำ
→ บ่งบอกการสะสมคำสั่งของ Smart Money
ใช้ร่วมกับ:
Market Structure
Kill Zone
Liquidity Sweep
จะเพิ่มความแม่นยำอย่างมาก
🔹 เหมาะกับใคร
✔ เทรดเดอร์สาย ICT / IPDA
✔ คนที่อยากเข้าใจ “ทำไมราคาหยุดตรงนี้”
✔ คนที่ไม่อยากเทรดมั่วตามอินดี้สัญญาณ
✔ ใช้ได้ดีมากกับ Gold / Indices / FX Major
⚠️ หมายเหตุ
อินดิเคเตอร์นี้เป็น เครื่องมือช่วยอ่านตลาด
ไม่ควรใช้เพียงลำพังโดยไม่เข้าใจโครงสร้างราคา
ผู้ใช้ควรมี Risk Management เสมอ
S&P Trend [GIF]This trend indicator is based on the S&P Info Tech Stocks that are above the 50-Day (SKFI) and the 200-Day Average(SKTH). I personally like to use SKTH the most.
Why Info Tech Stocks?
The S&P 500 is weighted by the total market value of its constituent companies, so larger companies (like those in Tech) have a greater impact. Information Technology is by far the largest sector, influencing overall index performance significantly. As of early 2026, Information Technology as a whole is approximately 35% of the weighted S&P 500.
How It Works
Select whether you'd like the trend indicator to use SKTH or SKFI and the timeframe you'd like to use. Please keep in mind that SKTH and SKFI update daily and you cannot use a timeframe less than that.
Candle Colors
The candles will paint based on the following criteria:
Yellow = Extreme (both SKTH and SKFI are below 15)
Green = SKTH or SKFI are above 50 (based on selection)
Red = SKTH or SKFI are below 50 (based on selection)
When candles are green the upward trend is in tact. When candles turn red the trend has been lost and caution should be taken. When candles turn yellow we are at extremes and often times a reversal or dead-cat bounce can follow.
IMPORTANT NOTE:
Data for SKTH and SKFI only go back to 2015 in Tradingview. Candles before 2015 will paint red as there is no data.
Indicator Example: Displacement Z-Score [Nexo Mechanics]What it does
This indicator measures how far price is from its moving-average “equilibrium” using a volatility-normalised displacement (z-score). It is a demo indicator made to show a simple displacement concept with clean visuals.
Calculations
Equilibrium: SMA(source, length)
Displacement: (price − equilibrium) / Stdev(source, length)
This script is published mainly for demo/learning purposes and to illustrate how the visuals (colour shifts, glow, and fills) can be applied to other indicator logic. It is not meant to be a complete trading system.
Not financial advice.
STM Smart Pullback EngineSTM Smart Pullback Engine
STM Smart Pullback Engine is a trend-continuation pullback indicator designed to identify high-probability retracement entries within a clearly defined market structure.
Built on Smart Trade Mastery (STM) principles, this indicator focuses on discipline, clarity, and structure-based trading — not breakout chasing.
Core Concept
This indicator waits for:
A clearly aligned trend
A controlled pullback
A price-action confirmation
Only when all conditions align does a trade signal appear.
Trend Filter (EMA Alignment)
Trades are allowed only when EMAs are properly aligned:
Uptrend
EMA 8 > EMA 50 > EMA 200
Downtrend
EMA 8 < EMA 50 < EMA 200
If EMAs are not aligned, the indicator stays inactive and no trades are generated .
This helps avoid sideways and choppy market conditions.
Pullback-Based Entry Logic
Buy Conditions
• Price remains above EMA 200
• Pullback occurs by:
– Price touching EMA 50 , or
– Engulfing candle opening below EMA 8
• Candle must not break EMA 200
• A bullish engulfing candle forms
Sell Conditions (Reverse Logic)
• Price remains below EMA 200
• Pullback occurs by:
– Price touching EMA 50 , or
– Engulfing candle opening above EMA 8
• Candle must not break EMA 200
• A bearish engulfing candle forms
This ensures trades are taken only during healthy pullbacks within an existing trend .
Engulfing Confirmation Options
Strong Engulfing (Optional)
When enabled:
• Buy → candle closes above the previous candle’s high
• Sell → candle closes below the previous candle’s low
This reduces signal frequency and improves confirmation quality.
Engulfing with Low Volume (Optional)
When enabled, an engulfing candle is valid only if it forms with lower volume than the previous candle .
This helps identify pullbacks caused by reduced market participation , which are commonly seen before trend continuation moves.
When disabled, engulfing candles are evaluated without any volume condition .
RSI as an Event (Not a Continuous Filter)
RSI is used as an event , not as a constant filter.
A valid setup requires:
• An RSI cross
• An engulfing candle
Both events must occur within a user-defined number of bars (default: 2).
The order does not matter — RSI may occur before or after the engulfing candle.
This prevents RSI from remaining always true during strong trends and reduces false signals.
Opposite Wick Filter (Optional)
To filter weak rejection candles:
• Buy setups evaluate the upper wick
• Sell setups evaluate the lower wick
The wick size can be measured as:
• A percentage of the full candle range , or
• A percentage of the candle body
Candles with excessive opposite wick size are automatically rejected.
Visual Guidance
• Blue candles → Uptrend
• Orange candles → Downtrend
• Grey candles → No-trade zone
Buy and Sell labels appear only on candle close (non-repainting).
RSI cross arrows are shown for additional confirmation.
Best Use Cases
• Trend continuation strategies
• Pullback / retracement trading
• Forex, Gold, Indices, Crypto
• Recommended timeframes: M5 to H1
Disclaimer
This indicator is for educational purposes only .
Always use proper risk management and confirm trades with your own analysis.
Powered by Smart Trade Mastery (STM)
Dual MA Trendline with Angle Lock"Dual MA Trendline with Angle Lock + Multiplier Bands" is a trend-following overlay indicator that combines two moving averages (MAs), each with a special "angle lock" mechanism.
Key mechanics: Instead of plotting the raw MA directly as the main trend line, it creates a piecewise-linear trendline for each MA.
The trendline locks its slope (angle) and starting value whenever the MA's recent slope changes significantly (more than the user-defined angleThreshold).
Between these "slope reset" points, the trendline continues with constant slope (straight line segments), producing flatter, more persistent trend representations than a curving MA.
Around the locked trendline, it draws symmetric bands:Base band (1×) — always shown
Optional multiplier bands (2×, 4×, 8×) — configurable
Bands can be in percentage (volatility-adaptive) or fixed points (useful for forex/crypto with small price units or tick-based instruments).
It also plots fills between the two MAs' bands/trendlines → visually highlights:Upper zone (greenish fill)
Middle zone (blueish fill)
Lower zone (reddish fill)
In short: two independent "locked-angle trend ribbons" with multiplier deviation bands + inter-ribbon fills.
Main Use Cases
Trend direction & strength visualization
The locked-slope trendlines stay straighter and change direction less frequently than normal MAs → clearer visual read of the prevailing trend (especially useful on noisy charts).
Dynamic support/resistance zones
1× bands act as near-term dynamic S/R.
2× / 4× / 8× bands serve as progressively stronger support/resistance or "overextended" levels.
→ Many traders watch for price rejection, bounces, or acceleration once price reaches 2×–4× bands.
Mean-reversion / pullback entries (especially in ranging or mildly trending markets)
Price touching or exceeding outer multiplier bands + returning toward the trendline often signals good mean-reversion setups.
Trend-continuation / breakout filtering Price riding above the upper bands in uptrend → strong momentum continuation. Price breaking and closing outside 4×–8× bands → potential acceleration or trend exhaustion signal.
Dual-timeframe / dual-speed MA comparison MA 1 is usually longer/slower (default 128), MA 2 is shorter/faster (default 14).
The fills between them act like a "trend tunnel" — wide middle fill = strong trend, narrowing = consolidation, color changes = possible reversal.
Clean chart alternative to channels / regression / envelopes
The angle-locking creates straighter, less whipsaw-prone lines than typical Bollinger Bands, Keltner Channels, or regression channels, while still adapting to price.
Typical settings example MA1: longer period (50–200), small angle threshold → persistent major trend
MA2: shorter period (9–34), larger angle threshold → more responsive minor trend
Use percentage bands on stocks/indices, fixed points on forex/crypto with small pip values.
Overall → very popular style among traders who like clean, low-repaint trend + deviation band systems (similar spirit to SuperTrend + envelopes, but with custom slope-locking logic).
KPRSI - Hidden DivergenceThis indicator does the following steps.
1) Plots EMA(20) and checks its slope (trend)
2) Detects RSI divergence (with tolerance)
It checks divergence between the last two pivots:
3) Adds filters to create “DivBuy / DivSell” signals
A divergence alone isn’t enough. It also requires EMA alignment:
DivBuy
• Bullish divergence
• EMA slope up (emaUp)
• Price above EMA (close > ema20)
DivSell
• Bearish divergence
• EMA slope down (emaDown)
• Price below EMA (close < ema20)
GoM Scalping Pro V1.32 | Multi-Timeframe Signal System🎯 GoM Scalping Pro V1.32 - Professional Multi-Timeframe Trading Signal System
GoM Scalping Pro is a comprehensive trading signal indicator designed for serious traders who demand precision, clarity, and professional-grade analysis. Built with advanced algorithms and multiple confirmation layers, this indicator helps you identify high-probability trade setups while filtering out market noise.
⚡ KEY FEATURES
🔹 Smart Signal Detection
Our proprietary signal engine identifies optimal entry points using advanced mathematical models. Signals are generated only on confirmed candles, ensuring zero repainting and reliable backtesting results.
🔹 Multi-Timeframe Hierarchy Filter (MTF)
Every signal is validated against higher timeframe trends using a hierarchical confirmation system. This ensures you're always trading in the direction of the dominant market flow, dramatically improving win rates.
🔹 Intelligent Market Filters
-RSI Momentum Filter**: Avoids buying in overbought conditions and selling in oversold zones
-Volatility Filter: Filters out signals during abnormal market volatility
-Volume Filter: Confirms signals with adequate market participation
-Session Filter: Trade only during your preferred market hours (UTC)
🔹 Automatic TP/SL Level Calculation
Each signal comes with precisely calculated:
- Entry Price
- Stop Loss (with optional ATR buffer for safety)
- 4 Take Profit Levels (TP1, TP2, TP3, TP4)
Risk/reward ratios can be set as fixed values or dynamic ratios that adapt to market conditions and timeframe.
🔹 Real-Time HTF Dashboard
A professional dashboard displays trend direction across 9 timeframes (M1 to Monthly) with:
- Visual arrows indicating bullish/bearish bias
- Color-coded cells (Green = Buy, Red = Sell, Gray = Neutral)
- Weighted sentiment score with clear action labels:
- PERFECT BUY / PERFECT SELL
- GOOD BUY / GOOD SELL
- SMALL BUY / SMALL SELL
- WAIT
🔹 Comprehensive Alert System
Never miss a signal with detailed alerts including:
- Signal direction (BUY/SELL)
- Entry price
- Stop loss level with pip distance
- All 4 TP levels with pip distances
- Fully compatible with TradingView's alert system (push, email, webhook)
📊 OPTIMIZED FOR
| Trading Style | Recommended Timeframes |
|--------------|----------------------|
| Scalping | M1, M5, M15 |
| Intraday | M15, M30, H1 |
| Swing Trading | H1, H4, D1 |
| Position Trading | D1, W1, MN |
The indicator automatically adjusts its internal parameters based on your selected timeframe for optimal performance.
⚙️ SETTINGS OVERVIEW
Multi-Timeframe Filter
- Enable/disable HTF hierarchy validation
Market Filters
- Volume threshold (% of 20-bar average)
- Session filter with customizable hours
RSI Momentum Filter
- RSI period and overbought/oversold levels
- Volatility threshold (ATR multiplier)
Dynamic TP System
- Fixed or dynamic risk/reward ratios
- Base R:R ratio for dynamic calculation
SL Buffer
- Optional ATR-based buffer for stop loss safety
Dashboard
- Position (4 corners)
- Size (Normal, Large, Extra Large)
- Custom colors
Display
- Signal colors
- Line length for TP/SL levels
🚀 HOW TO USE
1. Add the indicator to your chart
2. Select your timeframe - the indicator auto-optimizes settings
3. Wait for a signal - arrows appear with BUY/SELL labels
4. Check the dashboard - confirm overall market sentiment
5. Use the levels - Entry, SL, and TP lines are drawn automatically
6. Set alerts - receive notifications on your phone or email
Pro Tips:
- Use signals that align with the dashboard's "PERFECT" or "GOOD" readings
- Enable MTF filter for higher quality signals
- Adjust session filter to match your preferred trading hours
- Start with default settings, then fine-tune based on your asset
⚠️ DISCLAIMER
This indicator is a technical analysis tool designed to assist traders in their decision-making process. It does not guarantee profits and should not be considered as financial advice.
- Past performance is not indicative of future results
- Always use proper risk management
- Never risk more than you can afford to lose
- This tool should be used as part of a complete trading strategy
- Backtest thoroughly before live trading
Trading involves substantial risk of loss and is not suitable for all investors.
🌐 ABOUT GOD OF MARKET
God of Market develops professional-grade trading tools for retail and institutional traders. Our mission is to provide accessible, high-quality technical analysis solutions.
🔗 Website: godofmarket.com
📧 Support: contact@godofmarket.com
EMA Crossover Candle Color - 9/21A simple visual trend highlighter for intraday/day trading. This overlay indicator plots a fast 9-period EMA (orange) and a slower 21-period EMA (blue). Candles turn green on the exact bar where the 9 EMA crosses above the 21 EMA (bullish momentum shift), and red when the 9 EMA crosses below the 21 EMA (bearish shift). Otherwise, candles remain default. Great for spotting quick trend changes, momentum entries, or filtering chop on 5-min charts (or any timeframe). Pairs well with VWAP, volume, or price action for confluence.
MTF Session Range FibonacciMTF Session Range Fibonacci is a multi-timeframe indicator designed to map high-probability price reaction levels using a fixed intraday session range and Fibonacci projections.
The indicator first identifies a user-defined session window and records the session high and low. Once the session completes, it builds a complete Fibonacci structure from that range, including retracements and extensions above and below the session boundaries. These levels act as support, resistance, targets, and extreme reaction zones, commonly used for intraday and swing trading.
All calculations can be sourced from a higher or custom timeframe, allowing traders to project higher-timeframe structure onto lower-timeframe charts. This helps align entries with broader market context rather than relying on isolated chart data.
To provide trend confirmation, the indicator includes:
A Parabolic Weighted Moving Average (PWMA) to highlight directional bias and momentum strength.
A 50 / 200 EMA crossover system to identify potential trend shifts and dominant market direction.
Visual elements such as color-coded Fibonacci levels, informative tooltips, crossover markers, and optional fills between price and PWMA improve readability while keeping the chart structured.
This indicator is best suited for traders who rely on session-based structure, Fibonacci reactions, and multi-timeframe trend alignment, particularly in indices, forex, and futures markets.
EMA CloudEMA Cloud
Description
EMA Cloud is a clean, highly customizable indicator that visualizes the relationship between 8-period and 21-period moving averages as a dynamic cloud overlay. Perfect for identifying trends, momentum shifts, and potential entry/exit zones at a glance.
🔑 Key Features
Dual EMA Support – Choose between EMA or SMA for both moving averages
Visual Cloud Overlay – Shaded cloud between EMA 8 and EMA 21 with customizable colors:
🟢 Bullish Cloud (green) when EMA 8 > EMA 21
🔴 Bearish Cloud (red) when EMA 8 < EMA 21
Adjustable Parameters – Customize EMA lengths, line widths, and cloud transparency
Toggle Display Options – Show/hide the cloud or EMA lines independently
Comprehensive Alert System – Get notified on:
EMA 8 crossing above/below EMA 21
Price crossing above/below EMA 8
Price crossing above/below EMA 21
📈 How to Use
Trend Identification – Green cloud indicates bullish momentum; red cloud signals bearish momentum
Entry Signals – Look for cloud color changes (crossovers) as potential entry points
Support/Resistance – The EMA lines within the cloud can act as dynamic support/resistance levels
Confirmation Tool – Combine with price action or other indicators for confluence
⚙️ Settings
Setting Description
EMA Type EMA or SMA
EMA 8 & 21 Length Customizable period lengths
Cloud Transparency Adjust opacity (0-100%)
Line Width Thickness of EMA lines
Colors Fully customizable bullish/bearish colors
Alerts 6 configurable alert conditions
💡 Best Practices
Works on all timeframes and all assets (stocks, forex, crypto, futures)
Lower timeframes: Use for scalping and intraday trades
Higher timeframes: Ideal for swing trading and trend following
Combine with volume analysis for stronger signals
x5-smooth-ema[t90]Overview
The x5 Smoothed EMA Flow is a trend-visualization tool designed to filter out market "noise" by applying a secondary smoothing layer to a base Exponential Moving Average (EMA).
How to Use
Trend Filtering: The "Flow" helps identify the true trend. When the ribbon is expanding and colored for a bullish trend, it signals strong, sustained momentum.
Noise Reduction: Unlike a standard EMA which can "whipsaw" during consolidation, the double-smoothed layers stay smoother for longer, helping traders stay in a position during minor pullbacks.
Trend Confirmation: Use the alignment of all smoothing layers to confirm a trend. When all layers transition to the same color, it indicates a high-probability trend shift.
Dynamic Support/Resistance: The ribbon acts as a depth-based support or resistance zone. Price often reacts to the "core" of the flow before continuing its primary move.
Settings
Source: Choose the price source (Close, HL2, etc.) for the initial calculation.
Base Length: Adjust the sensitivity. Shorter lengths are better for scalping; longer lengths are optimized for swing trading.
Color Settings: Fully customizable Bull and Bear colors to match your chart theme.
Disclaimer: This indicator is for educational purposes only. Moving averages are lagging indicators and should be used in conjunction with other forms of analysis. Past performance is not indicative of future results.
The Bitterroot Trader Checklist//@version=5
indicator("Syntax-Safe Confluence Gauge", overlay=true)
// --- 1. INPUTS ---
col_ema9 = input.color(#00bcd4, "9 EMA Color")
col_ema20 = input.color(#ff9800, "20 EMA Color")
col_ema60 = input.color(#f44336, "60 EMA Color")
col_vwap = input.color(color.gray, "VWAP Color")
// --- 2. 48-HOUR DATA ---
h48 = ta.highest(high, 100)
l48 = ta.lowest(low, 100)
v48_avg = ta.sma(volume, 100)
// --- 3. CALCULATIONS ---
= ta.macd(close, 12, 26, 9)
e9 = ta.ema(close, 9), e20 = ta.ema(close, 20), e60 = ta.ema(close, 60)
v_wap = ta.vwap(close)
// --- 4. SCORING & CHECKLIST LOGIC ---
bool c1 = macdLine > signalLine
bool c2_bull = (volume > v48_avg and close > open)
bool c2_bear = (volume > v48_avg and close < open)
bool c3 = (e9 > e20 and e20 > e60)
bool c4_bull = close > h48
bool c4_bear = close < l48
bool c5 = close > v_wap
// Final Scoring
float s2 = c2_bull ? 1.0 : c2_bear ? -1.0 : 0.0
float s4 = c4_bull ? 1.0 : c4_bear ? -1.0 : 0.0
float live_mean = ((c1 ? 1 : -1) + s2 + (c3 ? 1 : -1) + s4 + (c5 ? 1 : -1)) / 5.0
// Count active checks for Alerts
int bull_checks = (c1 ? 1 : 0) + (c2_bull ? 1 : 0) + (c3 ? 1 : 0) + (c4_bull ? 1 : 0) + (c5 ? 1 : 0)
int bear_checks = (macdLine < signalLine ? 1 : 0) + (c2_bear ? 1 : 0) + (e9 < e20 and e20 < e60 ? 1 : 0) + (c4_bear ? 1 : 0) + (close < v_wap ? 1 : 0)
// --- 5. ALERTS ---
alertcondition(bull_checks >= 4, title="Strong Bullish Confluence", message="4+ Bullish Checks Aligned!")
alertcondition(bear_checks >= 4, title="Strong Bearish Confluence", message="4+ Bearish Checks Aligned!")
// --- 6. COLOR ENGINE ---
bool macd_curling_up = hist > hist
bool macd_curling_down = hist < hist
color final_c = #808080
if live_mean <= -0.1
final_c := (live_mean <= -0.8) ? #ff0000 : #8b0000
if macd_curling_up
final_c := #d84315
else if live_mean >= 0.1
final_c := (live_mean >= 0.8) ? #00ff00 : #006400
if macd_curling_down
final_c := #9e9d24
else
final_c := #808080
// --- 7. REWRITTEN NEEDLE LOGIC (Fixes the Mismatched Input Error) ---
string needle = switch
live_mean <= -1.0 => "┃ "
live_mean <= -0.6 => " ┃ "
live_mean <= -0.2 => " ┃ "
live_mean == 0.0 => " ┃ "
live_mean <= 0.4 => " ┃ "
live_mean <= 0.8 => " ┃ "
=> " ┃"
// --- 8. TABLE DISPLAY ---
var table gauge = table.new(position.top_right, 1, 1)
if barstate.islast
string check1 = "MACD: " + (c1 ? "✅" : "❌")
string check2 = "VOL: " + (s2 > 0 ? "✅" : s2 < 0 ? "❌" : "➖")
string check3 = "EMA: " + (c3 ? "✅" : "❌")
string check4 = "48H: " + (s4 > 0 ? "✅" : s4 < 0 ? "❌" : "➖")
string check5 = "VWAP: " + (c5 ? "✅" : "❌")
string display_text = "48H MEAN: " + str.tostring(live_mean, "#.#") + " " +
" " +
" " + needle + " " +
"------------------ " +
check1 + " | " + check2 + " " +
check3 + " | " + check4 + " " +
check5 + " | CURL: " + (macd_curling_up ? "UP" : "DN")
table.cell(gauge, 0, 0, display_text, bgcolor=color.new(final_c, 85), text_color=final_c, text_size=size.large)
// --- 9. PLOTS ---
plot(h48, "48H High", color=color.new(#00ff00, 50), style=plot.style_stepline)
plot(l48, "48H Low", color=color.new(#ff0000, 50), style=plot.style_stepline)
EMA Ribbon [AkaliBTC] (20 / 50 / 100 / 200 / 350)Cyclic EMA Ribbons to see the most relevant levels in volatile markets
EMA with RSI Color (Custom Lengths)本指标将指数移动平均线(EMA)与相对强弱指标(RSI)相结合,用于辅助判断市场的趋势方向与超买 / 超卖状态。
用户可自定义 EMA 的长度(如 20 / 60 / 120),并灵活选择 EMA 的计算周期:
(1) 使用当前图表周期,或
(2) 使用指定的高 / 低周期(如 1m、5m、1h、4h、1D、1W)
RSI 默认采用 14 周期,并支持自定义超买与超卖阈值:
(1) 当 RSI 低于超卖阈值(如 30)时,对应时间段内的 EMA 将自动变为绿色,提示可能存在超卖反弹机会;
(2) 当 RSI 高于超买阈值(如 70)时,对应时间段内的 EMA 将自动变为红色,提示可能存在超买回调风险;
(3) 当 RSI 处于中性区间时,EMA 显示为用户设定的默认颜色。
此外,RSI 的计算周期也可选择:
(1) 与 EMA 使用相同的周期(用于多周期趋势确认),或
(2) 使用当前图表周期(用于短周期动量判断)。
This indicator combines Exponential Moving Averages (EMA) with the Relative Strength Index (RSI) to assist in identifying trend direction and overbought/oversold conditions.
Users can define custom EMA lengths (e.g., 20 / 60 / 120) and flexibly choose the EMA calculation timeframe:
(1) Use the current chart timeframe, or
(2) Use a specified higher or lower timeframe (e.g., 1m, 5m, 1h, 4h, 1D, 1W).
The RSI uses a default 14-period setting, with customizable overbought and oversold levels:
(1) When RSI falls below the oversold threshold (e.g., 30), the EMA segments corresponding to that period are automatically colored green, indicating potential oversold rebound opportunities;
(2) When RSI rises above the overbought threshold (e.g., 70), the EMA segments turn red, signaling potential overbought pullback risk;
(3) When RSI remains within the neutral zone, EMA lines retain their user-defined default colors.
The RSI calculation timeframe can also be selected:
(1) The same timeframe as EMA (for multi-timeframe trend confirmation), or
(2) The current chart timeframe (for short-term momentum analysis).






















