Get started

Open

XRS Previous Day Close + Session Open LevelsXRS Previous Day Close + Session Open Levels XRS Previous Day Close + Session Open Levels automatically plots some of the most commonly referenced intraday reference prices used by futures, forex, and index traders. The indicator displays: • Previous Day Close (PDC) • Asia Open (6:00 PM New York Time) • Midnight Open (12:00 AM New York Time) • London Open (3:00 AM New York Time) • New York Open (9:30 AM New York Time) All session opens are calculated using 1-minute data for maximum accuracy regardless of the chart timeframe being viewed. ### Features * Accurate session open detection using 1-minute data * Previous Day Close tracking * Optional price labels * Adjustable colors and line thickness * Timezone support * Option to display only the most recent set of levels * Works on any timeframe ### Why These Levels Matter Session opens and the previous day's close often act as important reference points for: * Intraday bias * Support and resistance * Mean reversion setups * Liquidity sweeps * Session-to-session price comparisons * Auction Market Theory analysis Many traders monitor how price behaves around these levels to identify acceptance, rejection, continuation, and reversal opportunities throughout the trading day. ### Best Used For * Nasdaq Futures (NQ / MNQ) * S&P 500 Futures (ES / MES) * Dow Futures (YM / MYM) * Forex Markets * Index CFDs * Other liquid intraday markets This indicator is designed to provide a clean and lightweight way to keep key session reference levels visible at all times without cluttering the chart.
Pine Script® indicator
by xrstrading
Crypto: Macro Heatmap [invincible3]Crypto Macro Heatmap is an automatic market-regime dashboard designed to summarize crypto macro conditions using liquidity, leverage, breadth, and risk-participation metrics. The indicator converts multiple market data sources into normalized 0–100 scores and displays them in a structured heatmap table. It is built to help traders quickly understand whether the broader crypto environment is risk-on, neutral, or risk-off. Main dashboard sections: 1. Liquidity Tracks Global M2, total crypto market cap, USDT dominance, and BTC volume confirmation. Higher liquidity scores generally suggest stronger macro support for crypto markets. 2. Leverage Tracks open interest pressure, funding-risk proxy, liquidation-risk proxy, and OI acceleration. Higher leverage scores mean higher stress or crowding risk. 3. Breadth Tracks TOTAL2, TOTAL3, BTC dominance, ETH dominance, and altcoin participation. This section helps identify whether market strength is broad or concentrated. Key features: * Fully automatic scoring * No manual market-score inputs * Dashboard show/hide checkbox * Light/dark chart theme detection * Composite regime score * Regime meter * Market phase detection * Risk-state classification * Confidence score * Section delta versus 7 days ago * Fixed-width heatmap layout for cleaner visual alignment The composite score combines liquidity support, market breadth, and leverage-adjusted risk into one regime reading. The dashboard is intended for macro context and regime analysis, not direct buy or sell signals. Use this tool as a higher-timeframe market filter together with your own technical analysis, risk management, and trading system. Disclaimer: This indicator is for educational and analytical purposes only. It does not provide financial advice. Always do your own research and manage risk carefully.
Pine Script® indicator
by invincible3
Stochastic Bot with SL/TPStochastic Momentum Bot with Risk Management Description This trading bot is an automated strategy designed for TradingView. It aims to capitalize on short-term price reversals by identifying when an asset is temporarily "oversold" (priced too low) or "overbought" (priced too high) using the Stochastic Oscillator. Unlike basic indicator scripts that simply highlight buy and sell signals on a chart, this is a full Strategy Script. This means it virtually executes trades using historical data, applying strict Stop-Loss (SL) and Take-Profit (TP) percentages to protect your capital. It is highly customizable, allowing you to fine-tune the parameters to suit different assets and timeframes. How the Logic Works Entry (Buy): The bot enters a Long position when the %K line crosses above the %D line, but only if both lines are below the 20 threshold (indicating the asset is heavily oversold and momentum is shifting upward). Exit 1 (Take Profit): The bot will automatically close the trade if the price rises by your set Take-Profit percentage. Exit 2 (Stop Loss): The bot will automatically cut its losses and close the trade if the price drops by your set Stop-Loss percentage. Exit 3 (Momentum Reversal): If neither the SL nor TP is hit, the bot will close the trade early if the %K line crosses below the %D line while above the 60 threshold (indicating the asset is overbought and momentum is dying). Step-by-Step Guide to Using the Bot Part 1: Loading the Script into TradingView Open TradingView and load the chart you want to trade (e.g., TAO/USDT on the 15-minute timeframe). At the very bottom of the screen, click on the Pine Editor tab.Delete any existing code in the editor window so it is completely blank. Copy the Pine Script code provided previously and paste it into the editor. Click the Save button (floppy disk icon) at the top right of the Pine Editor and give your script a name (e.g., "Stochastic Bot"). Click the "Add to Chart" button. Part 2: Customizing the Strategy SettingsOnce the script is on your chart, a new menu will appear at the top left of your chart area with the name of your script.Hover over the script's name and click the Gear Icon (Settings).Click on the Inputs tab. Here is what each setting controls: Setting Name Default Description %K Length14 The number of previous candles used to calculate the main momentum line.%K Smoothing3Smooths out the %K line to reduce false signals.%D Smoothing3The moving average of the %K line, used as the trigger line for crossovers. Stop Loss (%)2.5 The maximum percentage of price drop you are willing to risk before exiting a trade. Take Profit (%)6.0 The percentage of price increase required to automatically lock in profits and exit. Part 3: Reading the Strategy Tester Once the bot is on your chart, the Strategy Tester tab at the bottom of the screen will automatically populate with backtesting data based on your current settings and timeframe. Net Profit: The total amount of money the bot made (or lost) over the given time period. Total Closed Trades: How many times the bot bought and sold. Percent Profitable (Win Rate): The percentage of trades that ended in a profit. Max Drawdown: The largest percentage drop in your account balance from its peak. This is a crucial metric for understanding risk; a high drawdown means the bot experienced severe losing streaks. List of Trades: A tab inside the Strategy Tester that shows you every single historical entry, exit, and the exact price it triggered at.
Pine Script® strategy
by JimmyPerez
R-GAP Kill Zones and Overnight Gap Tracker**R-GAP** is an advanced TradingView indicator designed for traders who focus on market sessions, liquidity behavior, and overnight price inefficiencies. It combines customizable **Kill Zones**, an automatic **11PM → 3AM overnight GAP detector**, and a dynamic reference line system based on precise 1-minute timing. ### Main Features * Fully customizable **Kill Zones** * Up to 3 independent sessions * Adjustable colors, transparency, and timezone * Automatic high/low range boxes * Intraday-only display option * Automatic **Overnight GAP Detection** * Detects the price gap between the **11PM close** and the **3AM open** * Uses anchored H1 data for accuracy * Draws a visual GAP box directly on the chart * Displays the exact GAP size with labels * Dynamic **11PM → 3AM Reference Line** * Drawn using a dedicated 1-minute internal clock * Fully customizable style, width, and color * Helps visualize overnight equilibrium and liquidity levels * Smart historical cleanup system * Automatically removes old boxes and lines * Optimized for performance on large histories * Built-in alert system * Kill Zone session start alerts * GAP start and GAP completion alerts ### Ideal For This indicator is especially useful for traders using: * ICT / Smart Money Concepts * Session-based trading * Liquidity sweeps * NY / London session models * Overnight imbalance analysis * Futures and index trading ### Designed For Precision R-GAP was built to provide clean institutional-style session visualization while remaining lightweight and highly configurable for discretionary or systematic traders.
Pine Script® indicator
by RAFENTech
Opening Auction Ledger [JOAT]Opening Auction Ledger Introduction Opening Auction Ledger is an open-source session framework built to standardize how the opening range is measured, locked, evaluated, and managed throughout the day. The indicator is designed around a simple institutional question: Once the opening auction is complete, is price accepting away from it or failing back into it? The script answers that by combining: session-specific opening range capture high-low or body-based range construction breakout qualification relative volume confirmation objective extension ladders session profile rendering adaptive continuation trail management historical breakout tracking in a dashboard This makes the opening range usable as more than a static box. It becomes a complete session ledger. Core Concepts 1. Opening Range Capture The script builds the opening range only during the specified session window and then locks that range when the session ends. This preserves a fixed reference for the rest of the day. 2. Source Flexibility Users can define the opening range using raw highs and lows or candle bodies. This changes how strict the opening auction frame is and can make the indicator more stable on noisy instruments. 3. Qualified Breakout Detection Breaks are not accepted simply because price crosses a range boundary. The script can require a minimum displacement beyond the range and, optionally, a relative-volume lift compared with recent activity. 4. Objective Laddering Once a breakout is confirmed, the script projects three extension objectives above and below the opening range using multiples of the locked range size. 5. Continuation Management An adaptive ATR trail follows the accepted breakout so continuation quality can be monitored after the initial move is underway. Features Configurable opening session: user-defined session window and timezone Opening range lock: session range freezes after the auction ends Body or high-low source mode: choose the structure used to build the range Relative-volume breakout filter: optional confirmation prevents weaker breaks from being counted Minimum displacement filter: breakout must exceed a configurable fraction of the locked range Extension ladder: three upside and three downside objectives Session profile: profile-style rendering of activity inside the opening auction Continuation trail: adaptive ATR trail tracks accepted move quality Historical outcome counters: dashboard tracks breakout counts and objective hit rates Institutional dashboard: top-right summary of session state, range size, direction, and objective performance Input Parameters Opening Auction Opening Range Session Session Days Timezone Range Source Minimum Break % Of Range Require Relative Volume Lift Relative Volume Threshold Extension Ladder Show Extension Ladder Objective One Objective Two Objective Three Show Price Labels Auction Profile Show Session Profile Profile Rows Profile Width Bars Profile Offset Bars Continuation Management Show Adaptive Continuation Trail Trail ATR Length Trail ATR Multiplier Display Range Fill Transparency Shade Session State Dashboard Position Dashboard Size How to Use This Indicator Step 1: Wait for the Range to Lock Do not treat the opening range as final until the configured auction window is complete. Before that point, the frame is still forming. Step 2: Measure the Quality of the First Break The first breakout matters most when it clears the minimum displacement rule and is supported by the configured relative-volume threshold. Step 3: Use the Ladder as an Objective Map The projected targets are not predictions. They are structured expansion references derived from the opening range itself. Step 4: Follow the Trail for Acceptance The continuation trail helps determine whether price is still accepting away from the opening auction or beginning to fail back toward it. Step 5: Review the Dashboard Statistics The dashboard can help users understand how often objective ladders are being reached under the current settings and instrument behavior. Indicator Limitations The usefulness of the opening range depends heavily on the selected session and market traded Relative-volume logic is chart-volume based and depends on the instrument's available volume series Very narrow opening ranges can create closely spaced objectives in low-volatility sessions A qualified breakout can still fail quickly in event-driven or thin-liquidity conditions Originality Statement Opening Auction Ledger extends the classic opening-range idea into a broader session framework by combining range locking, breakout qualification, objective ladders, profile context, continuation management, and outcome tracking in a single open-source script. Disclaimer This indicator is provided for educational and informational purposes only. It is not investment advice and does not guarantee that any breakout or target sequence will succeed. All calculations are based on historical chart data and should be interpreted with appropriate risk management and independent analysis.
Pine Script® indicator
by officialjackofalltrades
Liquidation Cascade Risk Map [AGPro Series]Liquidation Cascade Risk Map 🧠 Core Idea When leverage pressure builds, is the market entering a real cascade-risk zone, or is liquidation pressure already cooling? 📌 Overview / What it does Liquidation Cascade Risk Map is a crypto derivatives analysis tool designed to visualize liquidation-cascade risk without pretending to know exact exchange liquidation levels. The script evaluates open interest data when available, falls back to a transparent volume-proxy mode when needed, and combines volatility expansion, range pressure, candle body stress, directional movement, and distance from reference structure into a single cascade-risk context. It produces a cascade pressure path, right-side state tags, event labels, optional pulse markers, and a compact AG Pro dashboard panel. It does not predict future price, automate entries, provide liquidation prices, or act as a guaranteed signal system. 🎯 Purpose & Design Philosophy This script was built for traders who want to understand when a crypto market may be carrying unstable leverage pressure. Many liquidation tools focus on exact levels, heatmaps, or speculative liquidation clusters. Those can be useful, but they often require external datasets and may create false certainty when used as chart overlays. Liquidation Cascade Risk Map takes a different approach. It asks whether current market behavior has the ingredients of cascade vulnerability: expanding pressure, directional stress, range instability, aggressive bodies, and persistence. ⚡ Why This Script Is Different Most tools focus on liquidation levels, estimated heatmap bands, or simple volatility alerts. This script does NOT claim to know where every liquidation sits, and it does not draw exchange-style liquidation heatmaps. Instead, it maps the quality of the surrounding cascade-risk environment. It highlights when the market is showing pressure that may support long-side cascade risk, short-side cascade risk, two-way cascade vulnerability, or cooling after a pressure build-up. ⚙️ Methodology 1. Context Detection The script checks whether usable open interest data exists. If not, it can fall back to a volume-proxy model so the visual framework remains usable across more symbols. 2. Pressure Mapping It evaluates data change, volatility shock, candle range pressure, body expansion, distance from reference structure, and directional movement. 3. Cascade Evaluation Those components are blended into a cascade-risk score. The script then classifies the environment as Long Cascade Risk, Short Cascade Risk, Two-Way Cascade, Risk Cooling, Neutral Risk, or Data Missing. 4. Visual Output The chart displays a cascade pressure path, a dotted center reference, a vertical pressure needle, right-side tags, event labels, and a panel that summarizes the active state. 🗺️ How to Read the Chart The upper pressure rail represents elevated liquidation-cascade risk. The lower pressure rail represents cooling or pressure release context. The dotted centerline acts as the current reference path. The vertical needle shows how stretched the active cascade-risk score is inside the pressure path. Event labels identify important changes such as Long Cascade, Short Cascade, Two-Way Cascade, or Risk Cooling. The panel summarizes state, score, data change, velocity, persistence, cooling, direction, grade, data mode, ATR shock, data source, and trend. 🚦 Signals & States • Long Cascade Risk → downside pressure is elevated and long-side liquidation vulnerability may be rising • Short Cascade Risk → upside pressure is elevated and short-side liquidation vulnerability may be rising • Two-Way Cascade → volatility and pressure are elevated on both sides, suggesting unstable conditions • Risk Cooling → cascade pressure is decreasing after a build-up • Neutral Risk → no strong cascade-risk condition is currently active • Data Missing → the selected data source is not usable on the current symbol or mode 🔔 Alerts Logic Alerts can be enabled for Long Cascade Risk, Short Cascade Risk, Two-Way Cascade, and Risk Cooling. Each alert triggers when the selected state becomes active. Alerts are designed as attention markers, not trade instructions. 🧩 Confluence Logic The context becomes stronger when data expansion, volatility shock, range pressure, directional bias, and persistence align at the same time. For example, high volatility with strong directional movement and rising pressure persistence may indicate a more unstable cascade-risk environment than volatility alone. 📊 When to Use • Crypto perpetual futures • High-volatility market phases • Sharp directional moves • Post-breakout acceleration • Failed recovery or forced unwind environments • Situations where leverage pressure may matter more than ordinary trend context ⚠️ When NOT to Use • Very low liquidity symbols • Symbols with unreliable volume or open interest data • Extremely noisy low-timeframe charts • Markets with abnormal gaps or data breaks • Any situation where the user expects exact exchange liquidation prices 🎛️ Key Inputs • Data Mode → chooses between automatic open interest, manual open interest symbol, or volume proxy • Lookback Length → controls the normalization window for pressure scoring • Fast / Slow Pressure Length → controls short-term and baseline pressure reaction • Cascade Threshold → defines how demanding the script is before marking cascade-risk conditions • Cooling Threshold → controls when pressure is considered to be cooling • Persistence Bars → measures whether pressure is sustained or only momentary • Visual settings → control labels, pulse markers, path visibility, panel layout, and font sizes 🖥️ Interface & Visual Design The interface is built to make the chart readable at first glance. The cascade path is intentionally not a large boxed zone. It is a pressure-path structure designed to remain visually distinct from corridor, ladder, and basis-style scripts. The panel uses a merged AG Pro header row, compact metrics, and a dark professional layout. Visual elements avoid white or pale primary treatments so the script remains readable on both dark and light TradingView chart backgrounds. 🧪 Practical Usage Workflow 1. Read the panel state first. 2. Check whether Data Mode shows real open interest or volume proxy. 3. Look at the cascade pressure path and current needle position. 4. Check event labels for recent pressure build-up or cooling. 5. Compare the state with broader trend, volatility, and market structure. 🔍 Interpretation Guidelines Do not treat a cascade-risk state as a direct entry or exit signal. Use it as a context layer. The script is most useful when combined with structure, liquidity, volatility, market regime, and risk management. Rising cascade risk can mean the market is becoming unstable. Cooling can mean pressure is easing, but it does not guarantee reversal or continuation. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an automated trading system. It does not calculate exact liquidation prices. It does not guarantee that a liquidation cascade will happen. ⚠️ Limitations & Transparency Open interest availability depends on symbol, exchange, and TradingView data support. Volume proxy mode is only a proxy. It can help visualize pressure context, but it is not the same as real open interest. Different timeframes may produce different readings. Fast markets, illiquid symbols, gaps, and abnormal candles can affect outputs. 🧠 Market Context Notes Liquidation pressure is often connected to leverage, volatility, liquidity, and forced positioning. This script focuses on context quality rather than exact liquidation geography. That makes it useful as a decision-support layer, but it should always be interpreted with broader market evidence. 🧾 Use Case Examples When price accelerates downward while pressure score and persistence rise, the chart may show Long Cascade Risk. When price squeezes upward with high pressure and volatility expansion, the chart may show Short Cascade Risk. When volatility and pressure expand without clean directional separation, the chart may show Two-Way Cascade. When pressure falls after a build-up, the chart may show Risk Cooling. 🧱 System Philosophy AGProLabs scripts are built as structured decision-support tools. The goal is not to make the chart louder. The goal is to make hidden market context easier to read, compare, and question. 🔐 Non-Promise Statement No script can remove uncertainty. No state should be treated as certainty. No visual element should replace trader judgment. 📉 Risk Disclosure Trading involves risk. Crypto derivatives and leveraged markets can be especially volatile. This script is for educational and analytical purposes only. Nothing in this script should be interpreted as financial advice, investment advice, or a guarantee of outcome. Users remain fully responsible for their own decisions. 📚 Educational Note Use this script to study how pressure, volatility, persistence, and directional stress interact before and after unstable crypto market moves.
Pine Script® indicator
by AGProLabs
Leverage Reset Quality Map [AGPro Series]Leverage Reset Quality Map 🧠 Core Idea Did leverage actually reset, or did the market only pause before risk rebuilt again? 📌 Overview / What it does Leverage Reset Quality Map is a crypto derivatives context tool designed to evaluate whether a leverage washout is developing into a cleaner reset, a fragile reset, a crowded stress condition, or a reload-risk environment. The script combines open interest when available, a transparent volume-proxy fallback, data-change behavior, volatility shock, range expansion, wick flush behavior, recovery quality, persistence, and trend context. It converts those inputs into a reset-quality ladder, compact state labels, right-side tags, pulse markers, alerts, and an AG Pro dashboard. It does not liquidate positions, predict future price direction, automate entries, or claim that a reset must lead to a reversal. It is an analytical map for reading whether leverage pressure appears to be clearing, rebuilding, or remaining unstable. 🎯 Purpose & Design Philosophy This script was built for traders who want to separate a true leverage reset from a simple bounce, pause, or noisy reaction. After sharp moves, many markets look relieved for a short period. The important question is whether participation pressure cooled, volatility stabilized, and price recovered with acceptable structure. Leverage Reset Quality Map turns that question into a visible workflow. The design philosophy is simple: a reset is not automatically bullish or bearish. A reset is a context condition. Its quality depends on stress release, recovery quality, volatility behavior, and whether participation starts rebuilding too early. ⚡ Why This Script Is Different Most tools focus on liquidation levels, open interest changes, or raw volume spikes. This script does NOT draw another liquidation heatmap, does NOT treat every OI drop as bullish, and does NOT mark every volume spike as meaningful leverage cleansing. Instead, it evaluates reset quality as a multi-factor condition. It asks whether stress is building, whether pressure is releasing, whether the market is recovering cleanly, and whether leverage-style participation is reloading before the reset matures. ⚙️ Methodology 1. Context Detection The script reads official open interest when available. If official OI is unavailable and fallback is enabled, it uses volume as a transparent leverage-participation proxy. 2. Stress Mapping It evaluates data-change pressure, velocity, volatility shock, range shock, and wick flush behavior to estimate whether leverage-style stress is present. 3. Reset Quality Evaluation It measures participation contraction, volatility cooling, price recovery, wick recovery, and trend context to estimate reset quality. 4. Visual Output The output is displayed as a reset-quality ladder with state, quality, reload risk, event labels, compact pulse markers, reaction tracks, and a dashboard panel. 🗺️ How to Read the Chart The reset-quality ladder is the main visual object. The upper step represents the current reset or stress state. The middle step represents reset quality. The lower step represents reload risk. The vertical needle shows where current reset quality sits inside the ladder. Labels mark state transitions such as Clean Reset, Fragile Reset, Reload Risk, and Stress Build. Compact pulse markers add context: • R = Clean Reset pulse • F = Fragile Reset pulse • L = Reload Risk pulse • S = Stress Build pulse Colors communicate context: • Teal = cleaner reset pressure • Yellow = fragile or incomplete reset • Pink = reload or stress risk • Indigo = neutral reset-quality structure The panel summarizes state, reset quality, data change, stress score, persistence, reload score, direction, grade, data mode, volatility shock, OI source, and trend. 🚦 Signals & States • Clean Reset → stress release and recovery quality are improving • Fragile Reset → some reset behavior is visible, but quality remains incomplete • Reload Risk → participation may be rebuilding before the reset is healthy • Crowded Stress → leverage-style pressure is building without a clean reset • Neutral Reset → no active reset state dominates the current read • Data Missing → official OI and fallback data are not available 🔔 Alerts Logic Alerts trigger when the script transitions into selected reset-quality states. Clean Reset alerts mark improving reset quality. Fragile Reset alerts mark incomplete reset conditions. Reload Risk alerts mark renewed leverage-style participation before quality improves. Stress Build alerts mark stress expansion without a clean reset read. Alerts are attention markers, not trade instructions. 🧩 Confluence Logic The strongest context appears when several components align: Participation contraction + volatility cooling + wick recovery + price recovery + improving reset quality. The weakest context appears when participation expands again, volatility stays hot, and reset quality remains low. 📊 When to Use • Crypto perpetual and futures charts • Post-selloff or post-squeeze environments • High-volatility reactions • Open interest or volume-pressure analysis • Markets where leverage reset quality matters more than a raw signal ⚠️ When NOT to Use • Extremely illiquid symbols • Markets with unreliable open interest or volume data • Very low-volatility sideways charts where leverage pressure is not active • News-driven gaps where normal reset logic may be distorted • Any situation where the user expects a direct buy or sell signal 🎛️ Key Inputs • Data Mode → selects official OI, manual OI, or volume-proxy behavior • Manual Open Interest Symbol → lets the user define a specific OI source • Context Lookback → controls the normalization window • Fast Reaction Length → controls the short-term recovery track • Slow Baseline Length → controls the slower reset baseline • Minimum Stress Score → controls how much pressure is required for stress states • Minimum Quality Score → controls how much recovery quality is required for a clean reset • Event Label Cooldown → controls label spacing and visual density • Panel / label settings → control visual layout and readability 🖥️ Interface & Visual Design The interface is designed to feel different from zone-first or corridor-first tools. Instead of drawing a large boxed area, the script uses a staggered reset-quality ladder. This keeps the chart readable on both dark and light TradingView backgrounds and reduces the risk of looking like a duplicate of nearby derivatives tools. The panel uses a merged blue AG Pro header row and a compact information hierarchy. 🧪 Practical Usage Workflow 1. Read the panel state. 2. Check whether data mode is Open Interest or Volume Proxy. 3. Look at the reset-quality ladder. 4. Compare reset quality with reload risk. 5. Review recent event labels and pulse markers. 6. Confirm the broader chart structure. 🔍 Interpretation Guidelines A Clean Reset does not mean price must rise. A Reload Risk state does not mean price must fall. The script is designed to help users think in terms of leverage pressure, reset quality, and context alignment. It should be interpreted with broader structure, liquidity, trend, and risk controls. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It is not a liquidation heatmap. It does not guarantee reversals, continuations, entries, exits, or outcomes. ⚠️ Limitations & Transparency Open interest availability depends on the symbol, exchange, and TradingView data support. When official OI is unavailable, the script can use volume as a transparent proxy. A proxy is not the same as official open interest. Timeframe differences may change how reset quality appears. Volatility spikes, exchange-specific behavior, and sudden news events may distort the read. 🧠 Market Context Notes Leverage resets often appear after forced movement, sharp volatility expansion, wick-heavy reactions, or participation contraction. The important distinction is whether the reset becomes cleaner or whether risk reloads before the market has stabilized. This script focuses on that distinction. 🧾 Use Case Examples When price flushes lower, participation contracts, volatility cools, and price recovers toward the reaction track, the script may show Clean Reset. When a market bounces but participation expands again while reset quality remains weak, the script may show Reload Risk. When volatility remains hot and stress score remains elevated, the script may show Crowded Stress. 🧱 System Philosophy Leverage Reset Quality Map follows the AGProLabs principle of building decision-support maps rather than prediction tools. The goal is to make hidden market conditions easier to observe, compare, and interpret without overclaiming certainty. 🔐 Non-Promise Statement No script can know future price direction. No state should be treated as certainty. Every output should be interpreted as context, not as an instruction. 📉 Risk Disclosure Trading involves risk. Crypto derivatives can be highly volatile and may involve leverage, liquidation risk, exchange risk, data limitations, and rapid market movement. Users remain fully responsible for their own decisions. This script does not provide financial advice. 📚 Educational Note This script is intended for educational, analytical, and visual market-structure study. Its value comes from helping users ask better questions about leverage pressure, reset quality, and risk rebuilding.
Pine Script® indicator
by AGProLabs
Open Interest Commitment Map [AGPro Series]Open Interest Commitment Map 🧠 Core Idea Is open interest expansion actually committing with price, or is participation building without conviction? 📌 Overview / What it does Open Interest Commitment Map is a crypto derivatives context tool designed to evaluate whether open interest expansion, contraction, price movement, volatility, and persistence are aligning into a meaningful market participation state. The script attempts to read open interest data through configurable OI symbol builders, including Perp Contract OI, Chart Ticker + _OI, Dot-P + _OI, and Manual mode. When supported open interest data is available, it measures OI change, normalizes that change, compares it with price movement, and classifies the result into commitment states. If official open interest data is unavailable, it can fall back to a transparent Volume Proxy mode so the user knows exactly what data mode is being used. It produces a projected commitment zone, state labels, right-side tags, alerts, and an AG Pro dashboard. It does not predict price direction, automate entries, or claim that open interest expansion must continue. 🎯 Purpose & Design Philosophy This script was built because open interest is often discussed as if it has one simple meaning. In reality, rising open interest can support a trend, pressure a crowded side, reflect absorption, or become irrelevant without price confirmation. The goal is to turn open interest into a readable commitment map rather than a raw number. The script asks whether participation is expanding, whether price is accepting that expansion, whether the behavior persists, and whether the current state deserves attention. It is designed for crypto futures and perpetual traders who want to evaluate derivatives participation without relying on a simplistic “OI up equals bullish” or “OI down equals bearish” interpretation. ⚡ Why This Script Is Different Most tools show open interest as a separate line or histogram. This script does NOT treat open interest as a standalone signal, does NOT assume rising OI is automatically bullish, and does NOT hide data limitations when official OI is unavailable. Instead, it maps OI behavior into structured states: Long Build, Short Build, OI Unwind, Absorption, Reset, or Data Missing. It combines OI change, normalized OI deviation, price movement in ATR units, trend acceptance, persistence, and volume rank into one visual commitment framework. ⚙️ Methodology 1. Context Detection The script builds or reads the open interest source and checks whether official OI data is available. 2. Reference Mapping Open interest change is measured over a configurable lookback and normalized against a longer historical window. 3. Reaction Evaluation The model compares OI expansion or contraction with price movement, trend position, volatility, and persistence. 4. Visual Output The final state is displayed through a projected commitment zone, state tags, event labels, and a compact AG Pro panel. 🗺️ How to Read the Chart The commitment zone represents the active area where price and participation behavior are being monitored. Labels mark key state transitions such as Long Build, Short Build, OI Unwind, and OI Absorption. Colors communicate context: • Teal = Long Build • Pink = Short Build • Yellow = OI Unwind • Indigo = Absorption or neutral commitment context • Light/neutral = Reset or Data Missing The panel shows state, score, OI change, OI z-score, persistence, volume rank, direction, quality, data mode, OI source, and distance from the OI baseline. 🚦 Signals & States • Long Build → open interest expands while price shows constructive acceptance • Short Build → open interest expands while price shows bearish acceptance • OI Unwind → open interest contracts meaningfully while price moves • OI Absorption → open interest expands but price movement remains compressed • Reset → no strong commitment state is active • Data Missing → no usable open interest or proxy data is available 🔔 Alerts Logic Alerts trigger when the script transitions into a selected commitment state. Long Build alerts mark expanding participation with constructive price acceptance. Short Build alerts mark expanding participation with bearish price acceptance. OI Unwind alerts mark meaningful open interest contraction while price is moving. OI Absorption alerts mark expanding open interest with limited price movement. Alerts are attention markers, not trade instructions. 🧩 Confluence Logic The strongest read appears when multiple conditions align: Open interest change + OI z-score + price movement + trend acceptance + persistence + volume rank. When expansion appears without price progress, the context can shift from directional commitment to absorption. When contraction appears with price movement, the context can shift toward unwind behavior. 📊 When to Use • Crypto perpetual and futures markets • Symbols where TradingView provides open interest data through `_OI` • High-participation sessions where trader positioning may matter • Breakout, breakdown, compression, and post-liquidation environments • Situations where the user wants to distinguish commitment from noise ⚠️ When NOT to Use • Symbols with no reliable open interest data when proxy mode is not desired • Illiquid markets with unstable volume or fragmented data • Very low timeframe noise without broader context • Spot-only markets where open interest is not relevant • Major news events where positioning can change faster than the model can stabilize 🎛️ Key Inputs • OI Symbol Mode → controls whether the script uses Perp Contract OI, Chart Ticker + _OI, Dot-P + _OI, or Manual OI source selection • Manual Open Interest Symbol → allows manual OI source selection if needed • Allow Volume Proxy Fallback → uses transparent proxy mode when official OI is unavailable • OI Baseline Length → controls the smoothing baseline for participation data • OI Change Lookback → controls the change window for OI expansion or contraction • OI Normalization Lookback → controls how unusual the OI change must be • OI Commitment Z Threshold → defines the minimum normalized expansion required for commitment • Visual Settings → control zone projection, event labels, right-side tags, and font sizes 🖥️ Interface & Visual Design The interface is built around a clean commitment zone and a compact AG Pro panel. The chart should feel active but not crowded. The projected zone gives the screenshot a visible story, right-side tags show the live state, and event labels highlight meaningful historical transitions. The panel follows the AG Pro standard with a merged blue header row, adjustable location, adjustable theme, and adjustable font size. 🧪 Practical Usage Workflow 1. Apply the script to a crypto perpetual or futures chart. 2. Start with OI Symbol Mode set to Perp Contract OI. 3. Confirm the Data Mode row says Open Interest when official OI data is available. 4. If Data Mode says Volume Proxy, try Chart Ticker + _OI, Dot-P + _OI, or Manual mode before using the screenshot for publication. 5. Read the State and Score rows. 6. Inspect whether price and OI are building, unwinding, absorbing, or resetting. 7. Confirm the context with broader market structure, liquidity, volatility, and risk management. 🔍 Interpretation Guidelines Rising open interest is not automatically bullish. Falling open interest is not automatically bearish. Open interest expansion becomes more meaningful when price movement and persistence support the same story. Absorption can be important because participation is increasing without clean price progress. Unwind can be important because positioning is contracting while price is moving. 🚫 What This Script Is NOT This script is not a prediction engine. This script is not financial advice. This script is not an auto trading system. This script is not a guaranteed signal engine. This script does not guarantee official open interest data exists on every symbol. This script does not claim that open interest expansion must continue or reverse. ⚠️ Limitations & Transparency Official open interest availability depends on the symbol, exchange, and TradingView data support. If official OI data is not available and proxy fallback is enabled, the panel clearly shows Volume Proxy mode. Volume Proxy is not the same as official open interest. It can still help visualize participation pressure, but it should be interpreted more cautiously. Different exchanges, contract types, timeframes, and liquidity conditions can produce different open interest behavior. 🧠 Market Context Notes Open interest can help traders think about participation, but it needs context. Expansion with price acceptance may indicate commitment. Expansion without progress may indicate absorption. Contraction with movement may indicate unwind. No single state removes uncertainty. 🧾 Use Case Examples When OI expands and price accepts higher while trend context supports the move, the script may classify Long Build. When OI expands and price accepts lower while trend context supports the move, the script may classify Short Build. When OI expands but price remains compressed, OI Absorption can warn that participation is building without clean directional progress. When OI contracts while price moves, OI Unwind can help identify positioning reduction. 🧱 System Philosophy Open Interest Commitment Map follows the AGProLabs design principle of building decision-support maps rather than prediction tools. The script is designed to organize participation context into a readable workflow: read the panel, inspect the zone, check the state, evaluate reaction, and confirm with broader structure. 🔐 Non-Promise Statement No open interest model can guarantee future price direction. No commitment score creates certainty. This tool helps structure interpretation; it does not replace judgment. 📉 Risk Disclosure Trading involves risk. Crypto derivatives can be highly volatile and may involve leverage, liquidation risk, exchange risk, and rapid market movement. This script is for educational and analytical purposes only. It does not provide financial advice or guaranteed trading outcomes. Users remain responsible for their own decisions. 📚 Educational Note Use the script as a learning layer for understanding how participation, price movement, volatility, persistence, and open interest behavior can combine into a more complete derivatives-context read.
Pine Script® indicator
by AGProLabs
OPR Asia London US Universal Open Price RangeDescription : What this script does This indicator automatically draws the Open Price Range (OPR) for up to three configurable trading sessions: Asia, London, and US. For each session, it captures the high and low over a user-defined opening window, then extends the resulting levels forward in time so traders can monitor whether price respects or breaks the opening range. What makes it original Most OPR indicators on TradingView are hardcoded for a single instrument (DAX, NQ, ES) and a single timezone. This script solves three problems that existing public OPR tools do not handle: Universal — works on any asset (indices, forex, commodities, crypto) without symbol detection logic. No ticker filtering. Per-session timezone — each of the three sessions has its own independent timezone setting. Asia runs on America/New_York, London on Europe/London, US on America/New_York by default, but all are fully configurable. This ensures correct alignment regardless of the chart's display timezone. Cross-midnight handling — the Asia session starts at 20:00 ET (evening) and its extension target falls the next morning. The script correctly computes next-day timestamps for the extend line, a case that breaks most existing OPR implementations. How it works For each session the script computes a tStart and tEnd timestamp in the session's own timezone using Pine Script's timestamp() function with explicit year/month/day/hour/minute parameters. It accumulates the highest high and lowest low of all bars within the window. On the first bar after the window closes, it draws: A filled rectangle over the OPR capture window A thick left-edge vertical line marking the exact open High and low horizontal lines extended to a configurable end time An optional dotted midpoint line A small session label (AS / LN / US, all editable) The extend target uses a cross-midnight guard: if the extend hour falls before the session start hour in that timezone, 86,400,000 ms (one day) is added to the timestamp. How to use it Set Start hour/min and End hour/min to define the capture window for each session. Set Extend hour/min to control how far the high/low lines project forward. Enable or disable each session independently. All colors, line widths, and labels are customizable in the Style group. Works on any timeframe from 1 minute to 1 hour. Tested on indices (DAX, NQ, ES), forex pairs, and Gold.
Pine Script® indicator
by RAFENTech
_Neo Matrix__Neo Matrix_ is a market-state and structure reading system — built to make premium-style market structure tools freely accessible to the TradingView community. The main idea is simple: Core shows the market center. Wall shows the structural defense line. Trend Guide shows adaptive price boundaries. Stretch Zones show expansion and exhaustion areas. Dashboard summarizes the current state. Neo Matrix is intended as a visual framework for reading structure, pressure, expansion, and tactical context more clearly. The system combines several visual and contextual components: • Neo Core Neo Core acts as the central reference layer of the system, helping traders observe whether price is moving near, above, or below its main market center. • Neo Wall Neo Wall is a structural defense line designed to show the active market regime and the area where price structure is being defended. • Trend Guide Trend Guide is an adaptive boundary-based layer that helps visualize meaningful price displacement. Its upper and lower boundaries can be displayed to observe where price needs to move before the guide updates. www.tradingview.com • Stretch Zones Stretch Zones are expansion areas around the Core. They help identify when price is moving far away from its central structure and entering a stretched condition. www.tradingview.com • Candle Coloring Candle Coloring is a momentum-based visual layer that helps traders read short-term market tone directly on the candles. www.tradingview.com • State Dashboard State Dashboard is a compact panel that summarizes the current market state through three simple fields: REGIME — structural alignment between Wall and Trend Guide. FLOW — volume-flow-based pressure reading; neutral, bullish, bearish, or stronger pressure zones. WATCH — tactical watch state based on context and active setup areas. www.tradingview.com The market has its own Matrix. Neo helps you read it.
Pine Script® indicator
by Reeduck
Key Candle Opens [@Bnice_FNP]This indicator plots the most important candle open levels used in ICT methodology, giving you instant visual reference for key price levels that smart money and institutional traders pay close attention to throughout the trading day. All times are based on the New York (ET) timezone and are designed to align with TradingView's actual candle boundaries. Levels plotted: Midnight Open (MNO) — The 12:00 AM candle open. One of the most referenced price levels in ICT concepts, used to gauge daily directional bias. 4H Opens — The six 4-hour candle opens (12:00 AM, 6:00 AM, 10:00 AM, 2:00 PM, 6:00 PM, 10:00 PM ET) that align with TradingView's real 4H chart boundaries. Each open can be toggled on or off individually so you only see the ones relevant to your session. Asian Open — The 8:00 PM ET candle open marking the start of the Asian trading session. London Open — The 3:00 AM ET candle open marking the start of the London killzone. New York Open — The 9:30 AM ET candle open marking the NYSE cash open and NY killzone. Features: Individual toggle, color, line style, and width controls for every open 4H opens are independently toggled so you can focus on the sessions you trade Labels display at the right edge of each line for clean, unobstructed chart reading Adjustable line extension length Works on all intraday timeframes (1m, 5m, 15m, 1H, etc.) Best used on 1m, 5m, or 15m charts for intraday trading setups.
Pine Script® indicator
by FNP_Trades
Weekly Open Reaction Map [AGPro Series]Weekly Open Reaction Map 🔹 OVERVIEW Weekly Open Reaction Map is a focused weekly open overlay built for traders who use the current weekly open as a higher-timeframe anchor. The weekly open is one of the simplest and most widely watched reference levels on a chart. Many traders mark it manually, but a plain horizontal line does not show whether price is accepting above it, losing it, reclaiming it, or repeatedly reacting through the same area. This script turns the weekly open into a structured reaction map. The script plots the current weekly open, builds an adaptive reaction band around it, detects accepted behavior above or below the level, marks selective reclaim and loss events, and summarizes the active state in a compact dashboard. The goal is clarity: How is price reacting around the current weekly open? This is not a broad level engine. It is not a full weekly range dashboard. It is not a prior high or prior low tool. It is not a session-open model. It is a single-anchor weekly open reaction framework designed to keep the chart clean while adding practical context. 🔹 WHAT MAKES IT DIFFERENT Weekly Open Reaction Map is built around one level only: the current weekly open. Instead of plotting a large set of reference prices, the script focuses all of its logic on the active weekly open and asks whether price is above it, below it, reclaiming it, losing it, or still testing the reaction area. Key differentiators: • Single-anchor design centered only on the current weekly open • Adaptive reaction band instead of a fragile one-tick line • Acceptance-side model using sustained closes beyond the band • Reclaim and loss labels designed to stay selective by default • Concept-native rectangular reaction zones around confirmed weekly open behavior • Compact panel showing distance, acceptance side, active-week reaction count, weekly bias, and last event • Cleaner default visual mode tuned for 1H, 4H, and 1D public-chart presentation • Optional initial acceptance events for users who want more context The script is intentionally restrained. It does not try to become a full market structure suite. Its value comes from making one simple, popular, and highly searchable level more readable. 🧭 WHY THIS DOES NOT OVERLAP WITH OTHER AGPRO TOOLS This script was designed to stay separate from existing AGPro public concepts. It does not overlap with Daily Open Acceptance Map because this script does not reset around the daily open. The weekly open carries context across several trading days, so the logic is built around a multi-day weekly anchor rather than an intraday daily reference. It does not overlap with Reference Price Operating Map because this script does not compare multiple reference prices. There is no multi-reference framework here. The weekly open is the only operating level. It does not overlap with Session Reaction Map because this script does not evaluate Asia, London, New York, or session-start behavior. It continuously follows the active week and reads how price behaves around the weekly open over time. It does not overlap with PDH PDL PWH PWL Engine because this script does not plot previous day highs, previous day lows, previous week highs, previous week lows, or active range corridors. It avoids becoming a prior-period high/low engine. It does not overlap with generic support and resistance scripts because its boxes are not derived from swing pivots, historical ranges, or broad supply-demand zones. The reaction zones exist only when weekly open behavior is confirmed. The scope is narrow by design: Current weekly open. Acceptance. Reclaim. Loss. Reaction zones. Weekly bias. ⚙️ METHODOLOGY The script reads the current weekly open from the weekly timeframe and projects it onto the active chart. Around that weekly open, it builds a reaction band. This prevents the script from treating the weekly open as an unrealistically perfect single price. The band can be sized by: • ATR for volatility-adjusted behavior • Percent for proportional market structure • Ticks for fixed instrument precision The acceptance model checks whether price can sustain closes beyond the reaction band. A single close is not enough by default. The user can define how many consecutive closes are required before the script recognizes accepted behavior. The engine then tracks which side of the weekly open has been established during the active week. A weekly open reclaim is detected when price had already traded below the weekly open context and then confirms acceptance back above the level after a recent band interaction. A weekly open loss is detected when price had already traded above the weekly open context and then confirms acceptance below the level after a recent band interaction. Optional initial acceptance events can also be enabled. These show which side of the weekly open became dominant first after a new week begins. They are disabled by default so the public chart remains cleaner and more focused on reclaim/loss transitions. Confirmed events can create rectangular reaction zones. These zones preserve the weekly open area where the reaction was confirmed and project it forward for context. They are concept-native zones, not generic support/resistance boxes. 📊 PANEL The panel gives a fast read of the active weekly open condition. Distance Shows how far current price is from the weekly open, including a percent reading. Acceptance Side Shows whether price is accepted above the weekly open, accepted below it, or still testing the weekly open band. Reaction Count Counts confirmed weekly open reactions for the active week. The panel uses active-week logic, while visual label limits keep historical charts clean. Weekly Bias Summarizes the current weekly open state as Bullish Control, Bearish Control, or Neutral Test. Last Event Shows the latest confirmed weekly open event, such as WO Reclaim, WO Loss, WO Accept +, or WO Accept -. The panel includes adjustable location, theme, and font size controls. The first panel row follows the AGPro standard: a single merged blue header row containing only the script name. 🎛️ KEY INPUTS Show Weekly Open Line Controls whether the current weekly open line is displayed. Weekly Open Line Width Controls the visual weight of the weekly open reference line. Reaction Band Width Mode Choose ATR, Percent, or Ticks to define the width of the weekly open reaction area. ATR Width Multiplier Controls volatility-adjusted band width when ATR mode is selected. Percent Width Controls proportional band width when Percent mode is selected. Tick Width Controls fixed band width when Ticks mode is selected. Acceptance Confirmation Bars Defines how many consecutive closes are required before price is treated as accepted above or below the weekly open band. Recent Touch Window Requires confirmed events to occur near a recent weekly open band interaction. Show Active Weekly Open Band Displays the live weekly open reaction corridor. Show Confirmed Reaction Zones Draws extended boxes around confirmed weekly open reclaim, loss, or optional initial acceptance behavior. Reaction Zone Extension Bars Controls how far confirmed weekly open reaction zones project forward. Maximum Reaction Zones Limits the number of historical zones shown on the chart. Show Reclaim / Loss Labels Displays selective weekly open reclaim and loss labels. Show Initial Acceptance Events Allows first-side weekly open acceptance events to create labels and zones. Disabled by default for a cleaner public view. Minimum Bars Between Labels Controls cross-week spacing between event labels, helping avoid historical label clusters. Maximum Event Labels Limits visible historical event labels for a cleaner chart. Label Offset ATR Moves labels away from candles so they stay readable. Label Font Size Controls event label size. Normal is the default. Panel Location Moves the dashboard to the preferred chart location. Panel Theme Selects Dark, Light, or Auto panel styling. Panel Font Size Controls dashboard text size. Normal is the default. 🔍 HOW TO READ IT Start with the weekly open line. If price is above the line and the panel shows Above WO, the market is currently accepting above the weekly open band. If price is below the line and the panel shows Below WO, the market is currently accepting below the weekly open band. If the panel shows Testing WO, price is still close enough to the reaction band that the weekly open has not resolved clearly. WO Reclaim This label means price previously moved below the weekly open context and later confirmed acceptance back above it. WO Loss This label means price previously held above the weekly open context and later confirmed acceptance below it. Reaction Zones These boxes highlight the weekly open area where a confirmed reaction occurred. They can act as visual memory zones for later retests, pauses, or renewed pressure around the same weekly anchor. Weekly Bias The bias reading is not a standalone trade call. It is a context label that tells whether the active week is currently being controlled above the weekly open, below the weekly open, or still near the test area. Reaction Count This helps identify whether the week has been clean and directional or has already produced several confirmed weekly open reactions. 🧩 BEST USE CASES Weekly open context Use the script to understand whether the active week is being accepted above or below its opening level. Reclaim tracking Use WO Reclaim labels to identify when price regains the weekly open after trading below it. Loss tracking Use WO Loss labels to identify when price gives up the weekly open after previously holding above it. Multi-timeframe planning Use the weekly open as a higher-timeframe anchor while viewing 1H, 4H, or 1D charts. Clean chart workflow Use the script when you want one important weekly reference instead of a crowded stack of levels. Reaction-zone review Use projected boxes to remember where meaningful weekly open reactions were confirmed. Public chart publishing Use the default settings for cleaner TradingView screenshots and a more premium chart layout. 🧠 VISUAL DESIGN PHILOSOPHY The design philosophy is premium restraint. The weekly open should be easy to identify, but it should not dominate the chart. Labels should be useful, but not constant. Zones should preserve meaningful reaction areas, but not turn the screen into a grid of boxes. The default settings are intentionally cleaner: • Initial acceptance events are off by default • Reclaim and loss behavior remains the primary visible story • Label spacing works across weeks, not only inside one week • Historical label and zone limits are conservative • The panel uses a compact AGPro dashboard style • The active weekly open band is visible without overwhelming candles This helps the script remain practical on 1H, 4H, and 1D views while still giving the chart enough structure to feel complete. 🔔 ALERTS The script includes alert conditions for key weekly open events: Weekly Open Reclaim Triggers when price confirms a reclaim of the weekly open after previously trading below the weekly open context. Weekly Open Loss Triggers when price confirms a loss of the weekly open after previously trading above the weekly open context. Weekly Open Accepted Above Triggers when price confirms acceptance above the weekly open band. Weekly Open Accepted Below Triggers when price confirms acceptance below the weekly open band. These alerts are designed for context awareness around the weekly open. They are not intended to replace a complete trading plan or broader market review. 🔹 LIMITATIONS AND TRANSPARENCY Weekly Open Reaction Map is intentionally focused on one reference level. It does not attempt to map every support/resistance area on the chart. The script does not include previous day highs, previous day lows, previous week highs, previous week lows, session opens, daily opens, volume profile levels, swing pivots, or order-flow data. Because the weekly open can behave differently across assets and timeframes, users may need to adjust the reaction band width, confirmation bars, and label spacing for their market. On very low timeframes, labels can appear more frequently if sensitivity is increased. On higher timeframes, fewer but more meaningful events are expected. The weekly bias panel is a context tool. It describes the current relationship between price and the weekly open; it does not predict future price movement. The script is built to stay clean, transparent, and focused. Its strength is not feature volume. Its strength is making one widely used weekly reference level easier to read. ✅ IDEAL USER This script is ideal for traders who: • Use the weekly open as a key higher-timeframe reference • Want a cleaner way to read weekly open acceptance, reclaim, and loss • Prefer focused tools over crowded multi-level dashboards • Trade crypto, forex, indices, or liquid stocks where the weekly open is actively watched • Use 1H, 4H, or 1D charts for market context • Want reaction zones without turning the chart into a generic support/resistance map • Publish or review TradingView charts and need a clean visual presentation • Prefer structured context over excessive labels and visual noise Weekly Open Reaction Map is built for traders who want the weekly open to become more than a line. It turns that level into a readable acceptance and reaction framework while keeping the chart professional, restrained, and publication-ready.
Pine Script® indicator
by AGProLabs
Asian Range Liquidity Map [AGPro Series]Asian Range Liquidity Map 🔹 OVERVIEW Asian Range Liquidity Map is a precision tool for ICT and smart-money traders who focus on the London Open liquidity sweep. The indicator maps the Asian session high/low liquidity pool, tracks which side gets taken on the London kill-zone, and keeps a rolling 60-session record of post-sweep reactions. The engine calculates live Reversal / Continuation / Mixed probabilities for both bull and bear sweeps and displays everything in a compact info panel without cluttering the chart. Whether you trade Turtle Soup setups, session-based liquidity grabs, or simply want clean Asian range context, this indicator gives you the structural read most traders spend months building manually. 🔹 UNIQUE EDGE This is not another session-box plotter. Three design choices separate it from generic Asian range indicators: 1. ATR-Normalized Quality Filter — the range width is measured against the Daily ATR, not the chart timeframe. Sessions that are abnormally narrow (illiquid) or abnormally wide (news-driven noise) are filtered out of the statistics engine automatically. Only clean, tradable ranges count. 2. Live Historical Statistics Engine — every past sweep in the 60-session rolling window is classified as Reversal, Continuation, or Mixed using close-based validation. When a new sweep fires, a state label immediately shows the historical bias: "Bull Sweep -> Historical Reversal 73% (n=26)". You see the context the moment price reacts. 3. Three-Tier Classification — most tools treat sweep reactions as a binary outcome. This engine separates clean reversals, clean continuations, and indecisive mixed responses, giving a more honest statistical picture. The Mixed bucket is visible in the panel so the trader always knows how confident the signal actually is. 🔹 METHODOLOGY 1. Session Tracking — the Asian window is tracked using pure UTC hour/minute math (default 00:00-08:00 UTC), fully independent of chart timezone. Start and end hours are configurable. 2. Range Validity — on session close, the range width is compared to the Daily ATR. If the ratio falls outside the user-defined band (default 0.3-2.0 x dATR), the session is marked Filtered Out and excluded from statistics. 3. Sweep Detection — after the session closes, the engine watches a configurable post-open window (default 6 hours) for the first break of the Asian High or Low. Only the first sweep per session is recorded, which keeps the sample clean. 4. Reaction Classification — after the reaction window (default 10 bars), the engine evaluates post-sweep closes: - Reversal: price closed through the opposite side by at least Reversal Threshold x Range - Continuation: price sustained past the sweep level with pullback under Continuation Threshold x Range - Mixed: neither condition was met 5. Rolling Sample — the most recent 60 classified sweeps feed the Bull and Bear statistics independently. Default is 60, configurable from 20 to 100. 🔹 SIGNALS AND ON-CHART ELEMENTS - Asian Range Box: dotted amber rectangle during the session, solidifies on close if the range passes the ATR filter. Filtered sessions fade to near-invisible. - High and Low Dotted Extensions: projected right from each validated session, showing the liquidity levels the market will target. - Sweep State Label: appears on the bar that first breaks the range. Color-coded green for bull sweeps, pink for bear sweeps, with the historical bias and sample size baked in. - Sweep Line: thick horizontal line at the taken level, drawn forward across the projection zone. - Projection Zone: rectangular post-sweep forecast box where follow-through (or rejection) typically plays out. - Multi-Day Overlay: up to the last 5 validated Asian ranges rendered with fade hierarchy (oldest most faded, newest most visible). - Three alerts are included: Bull Sweep Detected, Bear Sweep Detected, and London Open with Valid Asian Range. 🔹 KEY INPUTS Session Settings: - Asian Session Start/End Hour (UTC) - Sweep Detection Window (hours after London Open) Quality Filter: - Use ATR filter (on/off) - Min and Max Range Width (x Daily ATR) - ATR Length Historical Stats Engine: - Sample Size (20-100 sessions) - Reaction Window (bars after sweep) - Reversal Threshold (x Range) - Continuation Threshold (x Range) Multi-Day Overlay: - Show historical sessions (on/off) - Days to show and fade intensity Post-Sweep Projection: - Show projection zone (on/off) - Projection length in bars Visual Style: - Label Font Size (independent from panel) - Show sweep state label (on/off) Info Panel: - Show panel, location, theme (Dark/Light) - Panel Font Size (independent from labels) 🔹 HOW TO USE Best fit: intraday timeframes from 1m to 60m. The 15m chart is the intended sweet spot and what the defaults are tuned around. The script auto-disables on 4H and higher with a clear on-chart notice. Typical workflow: 1. Confirm Range Status shows Valid after the Asian session closes. If Filtered Out, stand aside that day. 2. Wait for the London Sweep Window state and watch the Asian High/Low levels. 3. When a sweep fires, read the state label. A high Reversal probability near a major higher-timeframe level often flags a Turtle Soup opportunity. A high Continuation probability suggests fading is risky and trend-aligned entries are preferred. 4. Use the projection zone as a post-sweep attention area, not a target in itself. 5. Cross-check with your own higher-timeframe bias, volume, and structure before committing. 🔹 LIMITATIONS AND TRANSPARENCY - This is a context tool, not a strategy. No buy/sell signals are generated and no backtest or performance claim is made. - The historical percentages shown are descriptive statistics of recent price behavior in the sample window. They describe what has happened, not what will happen. A reading like 80% Reversal means four out of five prior sweeps in the sample reversed; the fifth did not. - On strongly trending or low-volatility instruments, distributions can skew heavily to one category. For example, on a tight range-bound market a liquidity sweep almost always reverts, producing very high Reversal readings. This is a feature of the data, not a bug. If a distribution looks extreme, tighten the Reversal Threshold and shorten the Reaction Window for a stricter definition, or widen them for a looser one. - Request.security is used to pull Daily ATR and is evaluated without lookahead; no future data is used. - First-run sample size will be small until the chart has enough history to fill 60 sessions. Expect the panel to show progress like 18 / 60 until the buffer fills. 🔹 RISK DISCLOSURE This indicator is a research and analysis tool for educational purposes. It does not constitute financial advice, a recommendation, or a solicitation to buy or sell any asset. Past behavior of liquidity sweeps does not guarantee future outcomes. Trading carries substantial risk of loss. Always perform your own analysis, apply risk management that suits your account, and consult a qualified professional before making financial decisions.
Pine Script® indicator
by AGProLabs
Session Reaction Map [AGPro Series]Session Reaction Map 🔷 OVERVIEW Session Reaction Map is a premium intraday study that maps how price reacts to the most important daily and weekly reference levels right at the opens of the Asia, London and New York sessions. Each session open is evaluated inside a fixed measurement window, and the resulting reaction is broken down into four dimensions: dominant move, close follow-through, wick rejection and counter-move penalty. The output is a single 0-100 reaction score that is then translated into tier-coded labels, premium reaction zones, an active reference band and a compact status panel, so you can instantly read what happened at each session open without scrolling through candles. The indicator is designed for discretionary traders, systematic traders, SMC and price action practitioners who want a clean, consistent and quantitative way to read session open behaviour around PDH, PDL, PDM, Daily Open and Weekly Open. Reactions are drawn as directional zones (bull zones above the reference and bear zones below), with up or down pointing labels centered on the reaction, so orientation is always unambiguous. 🧭 UNIQUE EDGE Most session open tools only mark time windows or highlight levels. Session Reaction Map goes further and quantifies the quality of the reaction itself. Four independent dimensions are measured against a fixed ATR-normalized baseline, and the final score determines not only whether a label is shown but also how prominent it is. Elite scores (80+) get the strongest visuals; strong scores (70-79) get a slightly softer treatment; watch scores (55-69) are coded as caution; anything below 55 is filtered out by default. This separation between detection (a session open near a reference) and evaluation (the reaction quality score) is the core edge. It lets you focus only on the best intraday reactions and discard noise automatically, while still being able to audit every component by adjusting the ATR length, touch tolerance, evaluation window and score thresholds. ⚙️ METHODOLOGY Session detection uses the chosen timezone and three session windows (Asia, London, New York), each with its own editable open range. When a session open occurs, the script checks whether the open price is within an ATR based touch tolerance of any enabled reference level (Previous Day High, Previous Day Low, Previous Day Mid, Daily Open or Weekly Open). If so, a reaction window is engaged on that bar and tracked for a configurable number of bars. During the reaction window, the live zone, reference band and dashed reference line are updated in real time. When the window completes, the final score is computed as: • Dominant move score (up to 45 points) - scaled against 1.20 x ATR • Close follow-through score (up to 30 points) - scaled against 0.90 x ATR • Wick rejection score (up to 15 points) - scaled against 0.50 x ATR • Counter-move penalty (up to -20 points) - scaled against 1.00 x ATR The sum is clamped into the 0-100 range and mapped into four tiers: Elite, Strong, Watch and Weak. The dominant direction of the reaction (up or down) is determined by comparing the upside excursion from the reference to the downside excursion from the reference during the window. 🎯 SIGNALS AND VISUALS • Reaction zones - rectangular areas connecting the reference level with the reaction extreme, tier-coded by score and bias • Active reference band - a thin accent band around the current reference level during a live reaction window • Dashed reference line - marks the exact reference price while the reaction is being measured • Tier-coded labels - up-pointing labels below bullish reactions and down-pointing labels above bearish reactions, centered on the reaction window • Session dots - small colored markers that optionally display only on valid events, keeping the chart clean • Active measurement highlight - an ultra-soft background shade on bars inside a live reaction window Labels use a ring buffer overlap check, so dense multi-session conditions do not pile labels on top of each other. When two labels would visually conflict, the higher-scored reaction wins. 🛠️ KEY INPUTS Sessions - enable/disable and edit Asia, London and New York session windows, each with its own color and timezone. Reference Levels - individually toggle PDH, PDL, PDM, Daily Open and Weekly Open. Reaction Logic - ATR length, touch tolerance in ATR, evaluation bars, label score filter, minimum label score, overlap reduction (bars and vertical ATR gap). Visuals - show/hide reference levels, session dots, dots only on valid events, reaction zones, minimum score for zones, zone transparency and extension, live reaction zone, active reference band with its ATR size and transparency, active measurement highlight, level width, label size, label offset in ATR and label background transparency. Panel - show/hide, position (six anchor points), Dark or Light theme, font size, optional guide row. All numerical inputs carry professional English tooltips explaining their role, so the script can be tuned for any symbol, timeframe and trading style. 📘 HOW TO USE 1. Apply the script on an intraday timeframe. It is designed for intraday use and will stay passive on daily/higher timeframes. 2. Recommended starting timeframe is 4H for swing intraday context, and 1H for tactical intraday work. Lower timeframes (15m, 30m) work too but may produce dense output. 3. Start with the default settings. Observe which sessions and which reference levels generate the most Elite and Strong reactions on your symbol. 4. Use the panel to monitor the current state: last session, last reference, bias, score, tier, label filter, zone filter and the active reaction status. 5. Treat Elite (80+) and Strong (70-79) reactions as the main signals. Watch tier is informative and Weak tier is generally discarded. 6. Align with your own confluence: higher timeframe bias, structure, orderflow, or whatever your primary framework is. The script does not issue buy or sell calls - it scores reactions, and you decide. ⚠️ LIMITATIONS AND TRANSPARENCY • This is not a strategy and does not place orders. No backtest statistics are implied. • Reaction scores are computed after the evaluation window completes, so they are not repainting but are confirmed with a lag equal to the evaluation window size. • The live reaction zone updates during the window and is finalized when the window closes. • Session behavior varies significantly by symbol (crypto vs FX vs equities) and by volatility regime. Inputs should be tuned per symbol. • Daily and Weekly references use standard request.security with barmerge.lookahead_off to avoid look-ahead bias. • The script is not a forecasting tool. It is a post-event quantification of how price has just reacted to a known reference level. 🛡️ RISK DISCLOSURE Trading involves substantial risk. Past reactions, patterns, zones or scores do not guarantee future performance. This script is provided for educational and analytical purposes only and is not financial advice. Always combine any tool with your own research, a defined risk plan and proper position sizing. You are solely responsible for your trading decisions.
Pine Script® indicator
by AGProLabs
Session VWAP Reaction Engine [AGPro Series]Session VWAP Reaction Engine Session VWAP Reaction Engine builds the active intraday session VWAP as a reaction anchor and classifies confirmed price behaviour around it into three clear event types — Reclaim, Bounce, and Reject — each validated by a configurable confirmation window, a minimum prior-side bar filter, and an optional VWAP slope alignment filter. A volatility-scaled reaction corridor, compact reaction zones, a session box, and a minimal right-side bias panel turn raw session flow into a clean, publication-ready read on acceptance, rejection, and continuation. 🔷 OVERVIEW Most session VWAP tools simply plot the line. Session VWAP Reaction Engine goes further: it reads how price behaves around the line inside a selected session window (Asia, London, New York, or Custom) and labels that behaviour using three structural event classes: • Reclaim — a confirmed cross and acceptance on the new side of session VWAP, after price has spent a minimum number of bars on the opposite side. • Bounce — a test of the reaction corridor edge that closes back on the prevailing side, with body-range and slope alignment quality checks feeding a Strong / Clean / Weak strength read. • Reject — a wick into session VWAP that fails to accept on the other side, resolving as pressure against the crossing attempt. Each confirmed event paints a compact rectangular reaction zone, a single label near the zone, and updates a right-side bias panel so the current session's story is always readable at a glance. 🟦 WHAT MAKES IT DIFFERENT ▸ Event classification, not just a line. Reclaim, Bounce, and Reject are treated as distinct structural events — each with its own confirmation path and visual signature — instead of blending into a single "crossed VWAP" signal. ▸ Corridor-based reaction detection. Bounce and Reject use a volatility-scaled ATR corridor around session VWAP rather than a single-pixel touch, which matches how VWAP is typically tested in real intraday flow. ▸ Slope-aware trend filter. Optional VWAP slope alignment biases bounce events toward the prevailing session direction and filters out counter-flow reactions that tend to fail. ▸ Reaction Strength read. Bounces are classified Strong / Clean / Weak using body-to-range ratio, close location in range, and slope alignment — turning every bounce into a quality-graded event. ▸ Active-Only and Publish Focus visual modes. The chart stays clean by surfacing only the latest session and the latest confirmed reaction, with older structure fading or removed. Ideal for decision-making and presentation. 🟣 METHODOLOGY 1) Session anchor. The selected session (Asia / London / New York / Custom) resets a cumulative PV / V VWAP on every new session bar, giving a fresh reaction reference for that window. 2) Prior-side filter. Before any Reclaim or opposite-side reaction can qualify, price must have spent a minimum configurable number of bars on one side of session VWAP. This isolates structural interactions and rejects chop. 3) Reclaim confirmation. A raw cross must be followed by N consecutive confirmed closes on the new side (default 2) before the Reclaim is validated and painted. 4) Corridor reactions. A volatility-scaled corridor (ATR × user multiplier) around session VWAP defines where Bounce and Reject qualify. Bounces require a corridor-edge test plus a close back on the prevailing side with body confirmation; Rejects require a wick into session VWAP that closes on the originating side. 5) Bias and state synthesis. Live Bias (Bullish / Bearish Acceptance or Pressure, or Neutral Rotation) is derived from close position relative to VWAP and corridor. Reaction State reflects the latest confirmed event (Bullish Acceptance, Bearish Acceptance, Bounce Support, Bounce Resistance, Reject Pressure, Reject Lift). 6) Post-session context. After the session ends, the last session VWAP and corridor stay on the chart for a configurable number of bars so recent structure remains visible without polluting older history. 🟢 SIGNALS & ALERTS Eight alertcondition hooks are provided, all bar-close confirmable: • Bullish Session VWAP Reclaim Confirmed • Bearish Session VWAP Reclaim Confirmed • Bullish Session VWAP Bounce Confirmed • Bearish Session VWAP Bounce Confirmed • Bullish Session VWAP Reject Confirmed • Bearish Session VWAP Reject Confirmed • Reaction State Shifted Bullish • Reaction State Shifted Bearish A "Confirmed Alerts Only" toggle restricts firing to barstate.isconfirmed so alerts will not repaint before close. 🟡 KEY INPUTS Session Engine • Selected Session — Asia / London / New York / Custom • Custom Session — HHmm-HHmm format (used when Custom is selected) • Session Timezone — Exchange / UTC / London / New York / Singapore Reaction Engine • Reclaim Confirm Bars — number of confirmed closes required after a cross (default 2) • Minimum Prior Side Bars — whipsaw filter on the opposite side before qualifying (default 2) • Reaction Corridor Width (ATR) — half-width of the ATR corridor around VWAP (default 0.20) • Reaction Zone Length (Bars) — how far a confirmed zone extends right (default 14) • Use VWAP Slope Alignment — trend filter for bounce events (default on) • VWAP Slope Lookback — slope estimation window (default 3) • Post-Session Context Bars — how long last session structure stays visible (default 18) Visual Story • Active-Only Mode, Publish Focus Mode, Show Previous Reaction Ghost • Show Session Box, Show VWAP Reaction Corridor, Show Confirmed Reaction Zone • Show Reaction Label, Show Session VWAP, Show Right-Edge SVWAP Tag • Visible History Bars (default 700), Label Font Size (default Normal) Panel • Show Bias Panel (top-right), Panel Font Size (default Normal) Alerts • Confirmed Alerts Only (default on) 🟠 HOW TO USE 1) Apply to any intraday timeframe (1m–4h). Session VWAP requires intraday data to anchor the session reference. 2) Choose the session that best fits your market focus — New York for US equities and US-hours crypto, London for FX and European hours, Asia for Asian-session flow, or a Custom window. 3) Watch the corridor as the session develops. Bounce and Reject events inside the corridor describe how the session is defending or failing the VWAP reference. 4) Use Reclaim events as session-context shifts — combine with your own structure (HTF trend, S/R, order flow) rather than treating them as standalone entries. 5) Read the right-side Bias Panel for a compact summary: Session Status, Bias, Last Reaction, Reaction Strength, Signal Age, Reaction State, and Latest Line status. 6) For screenshots and presentation use, keep Publish Focus Mode and Active-Only Mode enabled — older sessions fade and only the latest structure remains dominant. 🟤 LIMITATIONS & TRANSPARENCY • Intraday-only. Session VWAP is meaningful only on intraday timeframes; on daily and higher, the indicator will remain idle. • Session VWAP resets at the start of each selected session. Reactions are evaluated within that window only. • Confirmed events use bar-close logic. Intra-bar touches of the corridor are not counted as events until the bar closes. • Volume-dependent. Session VWAP uses symbol volume. On symbols without meaningful volume, VWAP accuracy will be limited. • The Reaction Corridor is a volatility-scaled visual and detection band, not a support/resistance guarantee. ⚠️ RISK DISCLOSURE This indicator is an analytical and visualisation tool. It is not a trading strategy, does not generate buy/sell recommendations, does not predict future price direction, and does not guarantee any specific outcome. All signals, zones, and panel readings describe past and current price behaviour around session VWAP, not forecasts. Markets carry risk of loss. Always use independent risk management, position sizing, and your own trading plan. Past behaviour of any signal does not imply future performance.
Pine Script® indicator
by AGProLabs
Reference Price Operating Map [AGPro Series]Reference Price Operating Map 🔹 OVERVIEW Reference Price Operating Map is a focused overlay that consolidates the four most universally watched reference prices — Daily Open, Weekly Open, Monthly Open, and Previous Close — into a single operating map. It tracks how price interacts with each level in real time, attributes control to the reference currently leading price action, groups overlapping references into confluence clusters, and fades distant context so the active map stays clean. The chart answers one direct question at a glance: which reference is controlling the session right now. Built for intraday operators, swing traders, and position traders who anchor their bias to session and period opens. Works on any symbol and any intraday or daily timeframe. 🔸 WHAT MAKES IT DIFFERENT Most open-line indicators simply draw horizontal lines for Daily, Weekly, Monthly, and Previous Close and stop there. This script goes further by adding four layers on top of those lines: • State tracking — each reference is classified as Untouched, 1st Touch, Tested, Held, Reclaimed, or Rejected, and the state updates bar by bar as price interacts with the level. • Control attribution — a proximity-weighted scoring system selects one reference as the current "controller" of price action, highlighted with a dominant-row background in the panel and a thicker line on the chart. • Confluence grouping — when two or more references sit within 0.5 ATR of each other, they collapse into a single cluster label (for example "D-Open + W-Open + PClose") instead of stacking separate labels on top of each other. • Distance-aware rendering — references far from current price are demoted to a thin gray zone with a dotted line, keeping them visible as structural context without crowding the active map. The engine also includes a far-aware state machine: references that price has not meaningfully engaged stay in the Untouched state instead of being forced into misleading classifications. 🔷 METHODOLOGY Reference levels are pulled directly from the higher timeframe open (Daily, Weekly, Monthly) and the previous daily close using lookahead-safe security calls on confirmed bars. Distance classification uses ATR(14) as a volatility scale. A reference is considered "near" when price is within a configurable ATR multiple and "far" when it exceeds the far-distance threshold. This adapts the map to both low-volatility ranges and high-volatility expansions without manual tuning. State transitions are driven by a finite state machine with six states. Key transitions: • Untouched → 1st Touch when price enters the touch zone (default 0.25 ATR) or wicks through it. • 1st Touch / Tested → Held when price moves cleanly away from the level on the same side. • 1st Touch / Tested → Reclaimed when price closes on the opposite side (optionally requiring multi-bar confirmation). • Any engaged state → Rejected when a large wick rebounds from the level with more than 60 percent wick ratio. • Held / Rejected → Reclaimed on a confirmed cross. The control score combines proximity (how close price is to the reference relative to ATR) with a state weight (Reclaimed and 1st Touch score highest, Held scores lowest). The reference with the highest score is tagged as controller; if no reference has meaningful engagement the panel reports No Active Control. 🔶 SIGNALS AND ALERTS Three alert conditions are exposed: • Reference Touched — fires the first time any reference is touched in its period. • Reference Reclaimed — fires when any reference transitions into the Reclaimed state. • Reference Rejected — fires when a large-wick rejection bar is registered at any reference. On-chart, first-touch diamond markers are placed on recent bars to make period engagement easy to spot in screenshots and reviews. The panel footer reports the current controller and updates in real time. 🔹 KEY INPUTS Reference Lines — independent toggles for Daily Open, Weekly Open, Monthly Open, and Previous Close. Display — Show Active References Only (hide untouched references for a cleaner map), Strict Reclaim Confirmation (require multiple confirmation bars for Reclaim), Label Density (Minimal shows only the dominant reference, Normal shows all active, Detailed appends state names to labels), Show Reaction Bands, Mark First Touches. Panel — position (four corners), font size, label font size. All default to Normal per AG Pro Series visual standards. Sensitivity — Touch Threshold (ATR multiple defining a touch), Reclaim Confirm Bars (strict-mode confirmation count), Band Width (reaction band width in ATR), Far Distance (ATR multiple beyond which references are faded to context). All parameters are ATR-scaled so defaults transfer cleanly across instruments and timeframes. 🔸 HOW TO USE 1. Open the panel and read the controller. If the footer shows "D-Open Controls" with a Bull bias, intraday operators treat Daily Open as the session pivot and trade with that bias until the state changes. 2. Watch the confluence label. A grouped label such as "D-Open + W-Open + PClose" means three references are stacked — a cluster of this kind is typically a higher-conviction zone than a single isolated reference. 3. Use state transitions as triggers. A Rejected state at Monthly Open during a rally is a different signal than a Reclaimed state at the same level. The state tells you what just happened at the level, not just where the level is. 4. Use the far zone as context. A Monthly Open plotted as a gray zone five ATR away from price is not an execution level — it is orientation. When price approaches it, the zone transitions into an active band and the state engine re-engages. 5. Combine with your own structure work. This map is designed to sit underneath price action analysis, order flow, or trend tools, not replace them. 🔷 LIMITATIONS AND TRANSPARENCY • This is an indicator, not a strategy. No entries, exits, position sizing, or backtesting is performed. • Reference prices are sourced from higher timeframe candles using confirmed lookahead. Results on intraday charts should match the official Daily, Weekly, and Monthly opens of the exchange the chart is connected to. • State classifications are heuristic. They describe observed behavior at each level in historical terms and should not be read as forecasts. A Reclaimed state is a description of what just happened, not a prediction of what comes next. • ATR-based thresholds mean the map adapts to volatility but can feel different on very low-volume or very thinly traded instruments. Adjust the touch threshold and far distance inputs if defaults feel too loose or too tight. • Confluence grouping uses a 0.5 ATR window. On very wide-range days this window can become large; on very narrow ranges it can feel tight. 🔶 RISK DISCLOSURE This indicator is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, trading advice, or any other form of advice. Past performance of any level, state, or methodology shown on the chart does not guarantee future results. Trading and investing involve substantial risk of loss. You alone are responsible for your decisions, for managing your risk, and for complying with the laws and regulations that apply to you. Test any tool on a demo account or in paper trading before using it with real capital.
Pine Script® indicator
by AGProLabs
Judas Swing Detector [AGPro Series]Judas Swing Detector ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ OVERVIEW ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ The Judas Swing is a well-known intraday pattern in ICT (Inner Circle Trader) methodology describing how price often makes a deceptive initial move at the London or New York session open — pulling in participants in one direction — before reversing to reveal the session's true directional bias. Judas Swing Detector systematically identifies, visualizes, and tracks this pattern across every London and New York session open. It shades the trap zone, flags the reversal bar, highlights the true-direction bias, and maintains a rolling 20-session performance log so users can assess how consistently the pattern resolves on their chosen symbol and timeframe. IMPORTANT — Timeframe requirement: This indicator is designed for intraday charts of 1 hour or lower (1m, 5m, 15m, 30m, 1h). Session windows anchor the entire logic, and a 1-hour Judas window cannot be resolved on 4-hour or higher charts. The panel always shows an "Optimal TF: 1m - 1h" footer, and the TF status row turns yellow with "use <=1h" if the current chart exceeds this range. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ UNIQUE EDGE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Unlike generic session-open or breakout indicators, Judas Swing Detector is built around a defined four-state lifecycle (Pending → Active → Forming → Confirmed / Failed) with ATR-normalized thresholds, so detection remains stable across different volatility regimes and asset classes. Three design choices make it distinct: 1. Independent two-way extremum tracking inside the Judas window — both the maximum upward and maximum downward excursion are recorded, and the larger of the two is declared the fake move when the window closes. This removes ambiguity in choppy openings. 2. Separate fake-move and reversal thresholds. The initial push must exceed a minimum ATR-scaled size to qualify, and the reversal must travel a second ATR-scaled distance beyond the session open — filtering out shallow round trips that would otherwise inflate the signal count. 3. Rolling 20-session statistics panel reporting success rate, average fake distance, and directional bias, giving discretionary traders an objective view of how the pattern is behaving on their instrument before they act on it. 4. Support/resistance-style invalidation zone drawn at the fake-move extremum after confirmation. This gives a clear visual anchor: if price later re-enters this zone from the opposite side during the session, the Judas read is considered broken. The zone is a reference, not an automatic signal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ METHODOLOGY ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Step 1 — Session anchoring At the first bar of the configured London or New York window the script records the session open price, resets the two-way extremum trackers, and transitions to the Active state. Step 2 — Fake-move accumulation During the window the script tracks both the maximum high and minimum low relative to the session open. Neither is committed as the fake move until the window closes. Step 3 — Window-close evaluation When the window ends the larger excursion (up vs down) becomes the fake direction. If its size reaches the user-defined ATR multiple it qualifies and the script transitions to the Forming state; otherwise it resets to idle. Step 4 — Reversal confirmation In the Forming state the script waits for price to cross the session open in the opposite direction of the fake move and travel at least the configured ATR-scaled distance beyond it. When that happens the swing is Confirmed and the true direction is drawn on the chart. If the reversal window expires without confirmation the swing is recorded as Failed. Step 5 — History log Every confirmed and failed outcome is appended to a rolling 20-session log used by the statistics panel. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SIGNALS & ALERTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ On-chart visuals: • Dashed vertical line at session start (accent color) • "LON" or "NY" label at the session anchor bar (Balanced / Detailed only) • Shaded fake-move box from session open to fake extremum, colored opposite to the true direction (a bearish trap is shaded in the bear tone because the true direction is down — and vice versa) • Optional "Fake" distance label at the extremum (Detailed density only) • Reversal marker "X UP" or "X DOWN" at the confirmation bar, offset from the candles for readability • Horizontal support/resistance-style invalidation zone around the fake extremum, extending 40 bars to the right — a visual reference for where the Judas read would break down if price re-enters the zone Alert conditions (toggle individually in settings): • Judas Swing Forming — fake move has qualified, waiting for reversal • Judas Swing Confirmed — reversal threshold crossed, true direction known • Judas Swing Failed — reversal window expired without confirmation ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ KEY INPUTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Session Windows • Track London Open — toggle London session monitoring • London Judas Window (NY time) — session string, default 0200-0300 • Track New York Open — toggle NY session monitoring • NY Judas Window (NY time) — session string, default 0930-1030 • Session Timezone — timezone used to interpret the windows • Reversal Window (minutes) — maximum time after window close in which a valid reversal can still be recorded Detection Logic • Min Fake-Move Size (ATR mult) — minimum excursion required to qualify • Reversal Confirmation (ATR mult) — distance beyond session open needed to confirm the reversal • ATR Length — lookback for threshold scaling Visuals • Show Session Start Line, Show Fake-Move Zone, Show Reversal Marker, Show Invalidation Zone — individual visual toggles • Label Density — Minimal / Balanced / Detailed • Font Size — tiny / small / normal / large (applies to labels and panel) • Theme — Dark / Light (panel only, chart candles unaffected) Panel • Show Info Panel — master toggle • Panel Location — 6 chart positions • Always displays: current session, state, true direction, fake distance, rolling 20-session statistics (success rate, avg distance, bull/bear bias), current TF status, and a footer reminding the optimal timeframe range Alerts — three individual toggles (Forming / Confirmed / Failed) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Supported timeframes: 1m, 5m, 15m, 30m, 1h. These resolve a session's early structure cleanly while keeping enough bars inside each Judas window for the extremum tracker to work with. Recommended default: 15m or 1h. Not supported: 4h, 1D, 1W. On these timeframes a single bar exceeds the session window, so nothing is detected. The panel will show a yellow "use <=1h" hint if you accidentally switch to one of these. Recommended instruments: FX majors (EURUSD, GBPUSD, USDJPY), index futures (NQ, ES), liquid crypto (BTC, ETH). The ATR-normalized thresholds keep the logic portable across these asset classes. Workflow suggestion: 1. Apply the indicator and let it observe several sessions so the panel populates a meaningful sample. 2. Review the 20-session success rate on your specific symbol and timeframe. This is not a forecast — it is a descriptive statistic of how the pattern has resolved in recent history on that chart. 3. Use the Forming alert as a heads-up, and the Confirmed alert as the main event. The true-direction arrow marks the bias of the remaining session, not a trade entry or exit. 4. Combine with your own structural context — higher timeframe bias, key levels, liquidity pools — before acting on any signal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ LIMITATIONS & TRANSPARENCY ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ • Not a strategy. This is a discretionary analysis tool; it neither places orders nor implies any specific trade setup. • Intraday timeframes only. The logic requires 1h or lower charts to resolve the session windows. On 4h, 1D or higher the indicator will not detect anything and the panel will show a "use <=1h" notice. • No forecasting. Displayed statistics describe past behavior on the current chart only and do not imply future performance. • Pattern-dependent. When price opens and trends cleanly in one direction without a fake move, the pattern legitimately will not trigger. Low signal count on such sessions is expected behavior, not a malfunction. • Session boundary sensitivity. Results depend on the configured session windows and timezone. Outside the major FX and equities session hours the ICT framing may not translate cleanly. • Extreme-volatility sessions. During very large gaps or news spikes the ATR thresholds can be dominated by a single bar; users should review the defaults in those conditions. • Symbol coverage. Pip conversion handles forex and JPY pairs explicitly and falls back to tick-based sizing for other asset types. Values are intended as relative magnitudes, not broker-specific pip quotes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ RISK DISCLOSURE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ This indicator is provided for educational and analytical purposes only. It does not constitute financial advice, a recommendation, or a solicitation to buy or sell any instrument. Trading involves substantial risk of loss; past pattern behavior is not indicative of future results. Users are responsible for their own trading decisions and for verifying that any signal aligns with their own methodology and risk management. The source code is published under the Mozilla Public License 2.0. Feedback and constructive suggestions are welcome.
Pine Script® indicator
by AGProLabs
2
AG Pro Daily Open Acceptance Map [AGPro Series]AG PRO DAILY OPEN ACCEPTANCE MAP OVERVIEW AG Pro Daily Open Acceptance Map is an intraday overlay built to track how price behaves around the current daily open and to present that behavior in a clean, rules-based structure. Instead of treating the daily open as a passive reference line, this script evaluates whether price is being accepted above it, accepted below it, or repeatedly failing around it. The core design goal is clarity. Many traders use the daily open as a contextual anchor, but in practice it is often shown as only a simple line with no structured interpretation. This script is designed to go one step further by turning that level into a mapped decision framework. The result is a chart that helps users read whether the market is holding one side of the daily open with acceptance, drifting into indecision, or failing to maintain directional control. This tool is intentionally narrow in scope. It is not built as a full market structure engine, a session model, a prior high/low dashboard, a VWAP tool, or a moving average framework. Its role is much more specific: to organize the behavior of price around the daily open and to express that behavior through a compact state model, visual reference lines, and confirmed state transitions. Because the daily open resets every trading day, the script also produces a recurring intraday reference that can be reused across many symbols and market conditions. This makes it useful for users who prefer repeatable visual anchors instead of highly discretionary chart interpretation. WHAT IT DOES This script identifies the current daily open and treats it as the primary intraday reference level. From there, it evaluates whether price is holding above the level, holding below the level, or still testing the area without confirmation. It also tracks the first reclaim event when enabled, allowing users to see whether the market has recovered one side of the level after losing it earlier in the day. The overlay is structured so the current daily open remains the main visual anchor, while the previous daily open can be shown as a lighter secondary context level. Acceptance areas and state mapping are kept as supporting elements rather than replacing the open itself. This keeps the chart readable while still preserving a visual record of how the market behaved around the level throughout the session. In practical terms, the script helps answer a simple but important question: is price truly holding one side of the daily open, or is it only rotating around it without meaningful acceptance? HOW THIS DIFFERS FROM OTHER AG PRO TOOLS This script is intentionally separated from the logic families used in other AG Pro tools. It does not rely on VWAP behavior. It does not build decisions from EMA or moving average relationships. It does not classify price by prior day or prior week high/low structures. It does not depend on sweep, stop hunt, liquidity trap, or session-kill-zone logic. It does not function as a structure label, breakout, or order-flow style engine. The purpose here is much more focused. AG Pro Daily Open Acceptance Map is a daily-open behavior tool. Its main question is not whether a breakout happened, whether liquidity was taken, or whether a trend indicator flipped. Its main question is whether the market is accepting or rejecting one side of the current daily open. That narrow positioning is deliberate. It helps keep the chart logic cleaner, the visual language simpler, and the use case easier to understand. UNIQUE EDGE The unique edge of this script is not the presence of a daily open line by itself. Many tools can plot a daily open. The distinctive part of this indicator is the state framework built around that line. Instead of only drawing the level, the script evaluates market behavior around it and converts that into a practical overlay language. The chart can therefore communicate whether the market is in bullish acceptance, bearish acceptance, or unresolved testing, rather than forcing the user to interpret every interaction manually. The script also separates the current daily open from the previous daily open in a clear visual hierarchy. The current open is treated as the primary live anchor, while the previous open is optional secondary context. This helps users compare the active intraday reference against the prior session without turning the chart into a multi-level dashboard. Another advantage is that the visual model remains compact. The script is designed to offer information density without becoming visually noisy, which is especially important on publish screenshots and on charts where traders prefer a clean price-first layout. METHODOLOGY The script starts by identifying the current daily open and, when enabled, the previous daily open. The current daily open becomes the main reference for all live state calculations. From there, the script measures whether price is sustaining closes above the level, sustaining closes below the level, or remaining in a testing state around the level. The filter mode can be adjusted to make the interpretation more responsive or more selective. In more permissive settings, state shifts can appear earlier. In stricter settings, price generally needs cleaner confirmation before a state is recognized. When reclaim logic is enabled, the script also monitors whether one side of the daily open is recovered after being lost earlier in the day. This is not treated as a separate prediction model. It is simply an additional contextual event that can help users understand whether the market is recovering control around the open after temporary failure. The acceptance area, open zone, and state ribbon are visual support layers. They are not intended to replace price or overwhelm the chart. Their purpose is to make the interpretation easier to read while keeping the current daily open as the main anchor. SIGNALS AND ALERTS The script supports confirmed-bar style logic so that state changes can be tracked in a more stable way. Depending on the enabled settings, users can monitor: Bullish acceptance conditions Bearish acceptance conditions Testing or unresolved behavior around the daily open First reclaim context when enabled General state transitions when the market changes side or loses control These alerts and visual states are intended for chart organization and condition awareness. They should not be interpreted as guaranteed trade outcomes, guaranteed continuation signals, or automated execution instructions. KEY INPUTS FILTER MODE Users can switch between stricter and more responsive behavior depending on how selective they want the state model to be. HOLD / CONFIRMATION SETTINGS These controls affect how much sustained price behavior is required before the script recognizes an accepted state. TOLERANCE AND OPEN ZONE SETTINGS These help define how tightly or loosely the script interprets price behavior around the daily open area. FIRST RECLAIM SETTINGS These controls determine whether reclaim events are tracked as part of the daily open behavior model. DISPLAY SETTINGS Users can control whether the current daily open, previous daily open, acceptance area, ribbon, labels, and panel elements are shown. VISUAL SIZE SETTINGS Panel and label sizing can be adjusted depending on symbol volatility, screen resolution, and chart density preferences. LIMITATIONS AND TRANSPARENCY This script is not a forecasting engine. It does not predict where price must go next. It evaluates how price is behaving relative to the current daily open and displays that information in a structured way. It is also not a substitute for complete market analysis. It does not include broader trend context, liquidity analysis, volume profile logic, macro structure interpretation, news impact, or instrument-specific catalysts unless the user applies those separately. Different symbols and timeframes can also produce different daily open behavior. In some instruments the daily open may act as a very strong intraday reference, while in others price may rotate around it more loosely. Because of that, the script should be interpreted as a contextual decision aid rather than a universal standalone solution. The previous daily open is included only as optional secondary context. It does not drive the main state model. The main live logic is built around the current daily open. RISK DISCLOSURE This script is provided for market analysis, chart organization, and educational use. It does not provide financial advice, investment advice, or guaranteed trade signals. No indicator can remove market risk, and no visual state model can ensure a profitable result. Traders should use their own judgment, position sizing rules, and risk management process before making any decision. This tool can help structure chart interpretation, but execution responsibility always remains with the user.
Pine Script® indicator
by AGProLabs
2
AG Pro Anchored VWAP Event Map [AGPro Series]AG Pro Anchored VWAP Event Map Overview / What it does AG Pro Anchored VWAP Event Map is an overlay built to organize price action around Anchored VWAP after a meaningful starting point has been defined. Instead of treating VWAP as a single static reference, this script focuses on the relationship between price and a chosen anchor, then maps how the market behaves after that anchor is established. The goal is not to forecast price, but to make post-anchor structure easier to read in a consistent visual framework. The script supports three anchor paths: Open, Swing, and Event. Open mode can reset the anchor from a daily, weekly, or monthly opening context. Swing mode rebuilds the anchor from a confirmed pivot high or pivot low. Event mode is designed for expansion-type situations and can anchor from a range expansion, a volume spike, or a breakout impulse. This creates a flexible workflow for traders who want to study how price responds to AVWAP under different structural conditions without switching tools. Once the anchor is set, the script plots the Anchored VWAP, builds a distance band around it, tracks reclaim and reject behavior, and summarizes the current post-anchor bias in a compact panel. The result is a clean event map that can be used to study acceptance, rejection, recovery, or continuation around an anchored reference level. It is meant to simplify interpretation, not replace market context. A key design goal of this script is clarity. The visual package is intentionally structured so the anchor, AVWAP path, distance zone, signal labels, and bias panel can be read together without turning the chart into a dense signal board. In practice, that means the indicator is most useful when it is treated as a contextual decision-support tool rather than a standalone trigger engine. Unique Edge The main distinction of this script is that it is not built as a generic VWAP overlay. Its emphasis is on post-anchor behavior. That means the visual logic starts from the selected anchor event and then evaluates how price interacts with the anchored VWAP afterward. In other words, the anchor is not only a starting point for the line itself; it is the center of the script's interpretation model. Another differentiator is the combination of multiple anchor sources within one workflow. Traders can use opening-session logic, confirmed swing logic, or event-driven logic depending on the type of market behavior they are studying. This makes the indicator suitable for different styles of chart review while keeping the interface straightforward. The distance band adds a second layer of structure. Rather than reading only the AVWAP line, users can also see whether price is operating close to the reference, stretched around it, or reacting from the upper or lower band zone. This helps frame whether a move appears to be re-accepting the anchored average, rejecting away from it, or trading in a more extended state. The script also tries to keep the signal layer readable through selective label logic. Reclaim and reject markers are not intended to flood the chart. They are there to mark notable interactions with the anchored framework, while the panel provides a compact summary of the active anchor, current bias, distance, and latest signal state. Methodology The script begins by defining an anchor source. In Open mode, the anchor can be tied to a daily, weekly, or monthly opening transition. In Swing mode, the script waits for a confirmed pivot high or pivot low based on the selected swing length. In Event mode, the anchor is created only when a qualifying market event appears according to the selected event model. For event-based anchoring, the script can use one of three internal conditions. Range Expansion looks for directional range behavior relative to ATR and recent structure. Volume Spike looks for directional participation with higher-than-average volume and a meaningful candle body fraction. Breakout Impulse looks for directional movement through recent extremes with supportive range and volume characteristics. These are practical anchor candidates for traders who want the AVWAP to begin from a meaningful change in behavior rather than from a calendar reset. After the anchor is created, the script calculates Anchored VWAP using cumulative price-volume data relative to that anchor point. From there, it builds a distance band around the AVWAP. The band can be defined by ATR or percentage mode, depending on whether the user prefers a volatility-based or proportional framework. Post-anchor bias is then derived from a simple internal score. The script evaluates whether price is above or below AVWAP, whether the AVWAP slope is improving or weakening, and whether price is trading beyond the distance band. This produces a practical Bullish, Bearish, or Neutral state. The intention is not to compress market structure into a perfect score, but to provide a compact directional read that can be used alongside the chart. Reclaim and reject logic is based on how price interacts with the AVWAP and the surrounding band after the anchor is active. A reclaim highlights price moving back through the anchored reference with confirmation, while a reject highlights failure or pushback behavior around the band area. These events are intended as structural observations rather than guaranteed trade setups. Signals & Alerts The script includes reclaim and reject signal logic for both directions. These labels are designed to call attention to notable interactions with the anchored framework after the selected anchor becomes active. In practical use, reclaim behavior can be interpreted as a sign that price is attempting to re-establish acceptance relative to AVWAP, while reject behavior can suggest rejection away from the mapped zone. Because market structure can become noisy, the script also includes signal spacing and density controls to reduce repetitive label clutter. This is especially relevant when anchored conditions remain active for long periods and price repeatedly tests the same area. The goal is to preserve readability while still marking relevant interactions. Alert conditions are included for bullish reclaim, bearish reclaim, bullish reject, bearish reject, and a broader any-signal state. These alerts are deterministic within the script's ruleset, but they should still be used as workflow tools rather than interpreted as self-sufficient trading instructions. Key Inputs Anchor Source: Choose whether the indicator should anchor from Open, Swing, or Event logic. Open Anchor Type: In Open mode, select daily, weekly, or monthly opening context. Swing Length: Controls how confirmed pivot highs and lows are detected in Swing mode. Event Type: In Event mode, choose between Range Expansion, Volume Spike, or Breakout Impulse as the anchor trigger model. Event Lookback / Multipliers / Cooldown: These inputs control how strict the event selection becomes and how frequently new event anchors can appear. Band Mode: Switch between ATR-based and percentage-based distance bands. ATR Band Multiplier / Percent Band: Define the width of the distance zone around Anchored VWAP. Signal Density: Helps regulate how aggressively reclaim and reject labels are displayed. Panel and Label Size: Allows the visual layout to remain readable across different chart styles and screen sizes. Show Anchor Label / Show Anchor Level / Show Bias Ribbon: These toggles control the visibility of anchor-focused visual elements and optional bias coloring. Limitations & Transparency This script is an interpretation aid. It does not identify the single correct anchor for all market environments. Different anchor choices can lead to different AVWAP paths, different reclaim or reject readings, and different conclusions. That is normal, and it is one of the reasons the script provides multiple anchor modes. Event-based anchors depend on internal threshold logic such as ATR expansion, volume conditions, and breakout behavior. On some symbols or timeframes, those filters may trigger more frequently or less frequently than expected. Users may need to adjust event sensitivity and band settings to fit the market they are analyzing. Reclaim and reject states are rule-based. They are not a guarantee of continuation, reversal, or follow-through. In sideways conditions, repeated AVWAP interactions can occur without producing a sustained directional move. The script can help organize those interactions visually, but it cannot remove market uncertainty. The post-anchor bias is intentionally simplified. It is designed for readability, not for complete market classification. It should be read together with broader price structure, higher-timeframe context, liquidity conditions, and user-defined execution rules. Risk Disclosure This indicator is for chart analysis and workflow support. It does not provide financial advice, investment advice, or guaranteed outcomes. Markets involve risk, and any trading or investing decision remains the sole responsibility of the user. No indicator can remove uncertainty from live markets. Anchored VWAP, reclaim behavior, reject behavior, and bias states are analytical references only. They should be validated with independent judgment, risk management, and broader market context before being used in any decision-making process. Use this script as a structured visualization tool, not as a promise of performance or a substitute for disciplined trade planning.
Pine Script® indicator
by AGProLabs
4
Custom Open LineDaily Open Line (Custom Timezone) Plots a horizontal line at a user-defined daily open time with full timezone control. Designed to work across equities, futures, forex, and crypto without being locked to a specific exchange session. Most “daily open” indicators are hardcoded to New York time. This script removes that limitation and lets you define exactly what “open” means for your market. The script includes customizable timezone selection such as Chicago, New York, London, and UTC, along with adjustable open hour and minute inputs. The default is set to 08:30 Central Time, which aligns with the 09:30 Eastern equity market open. Users can modify this to match any session including London open, Asia open, or forex rollover. Each day, the script detects the bar matching the selected time and plots a horizontal line at that bar’s open price. The line extends forward and remains on the chart based on the selected lookback period. Visual settings such as line color, width, and style are fully customizable, and an optional label can display the exact open price. This tool is useful for tracking key intraday levels, identifying directional bias relative to the open, and supporting price action strategies such as mean reversion or breakout trading. It also allows traders to align different markets using a consistent time reference. This script works best on intraday timeframes such as 1-minute to 15-minute charts. On higher timeframes, the exact open bar may not exist depending on the data feed. For forex and crypto markets, users should select a timezone and time that matches their specific trading model.
Pine Script® indicator
by tgregg75
AG Pro ORB Quality [AGPro Series]AG Pro Opening Range Breakout Quality OVERVIEW / WHAT IT DOES AG Pro Opening Range Breakout Quality is a session-structure indicator built to evaluate how price behaves around the Opening Range rather than treating every early breakout as equally meaningful. The script defines an Opening Range from a user-selected session window, locks that range when the session window ends, and then tracks whether price breaks above or below that range with constructive follow-through, delayed expansion, weak continuation, retest acceptance, or failure back into the range. Instead of acting like a simple breakout marker, this tool is designed to help organize the sequence that often matters most after the range is formed: range construction, first directional break, follow-through quality, retest behavior, acceptance, and failed continuation. This makes it more useful for traders who want a structured way to study whether the market is truly accepting price outside the Opening Range, or only probing beyond it temporarily. UNIQUE EDGE Most Opening Range tools focus mainly on drawing the range and marking the first break. This script is designed to go one step further by grading the quality of that break and the quality of post-break behavior. Its main edge is not the box itself. Its edge is the attempt to classify whether the move is: clean, good but delayed, weak, accepted after retest, or rejected back into the range. That makes the script conceptually different from a generic breakout overlay and also different from a broad market-structure or break-retest map. This indicator is specifically anchored to the Opening Range and to the behavior that follows that range. METHODOLOGY 1) Opening Range Construction The script builds an Opening Range from the chosen session window and stores: - range high - range low - optional midpoint 2) Break Detection After the range is locked, the script scans for the first qualified directional break within a defined search window. 3) Quality Engine Once a break appears, the script evaluates it using a rules-based scoring framework. The score can incorporate factors such as: - displacement beyond the range - body efficiency versus wick behavior - timing of the break relative to the range lock - optional relative volume context - directional alignment versus a moving average reference - post-break extension quality - retest depth and retest acceptance 4) State Transition Logic The script then maps price behavior into structured states such as: - Building Range - Watching Break - Bull Break Detected - Bear Break Detected - Bull Acceptance - Bear Acceptance - Failed Back In - Range Expired 5) Visual Organization The chart can display the Opening Range, the active acceptance zone, and projected target levels so that the user can visually compare the range location, the active accepted area, and nearby expansion references. SIGNALS & ALERTS The script can generate alerts for: - break events - acceptance events - failure events These alerts are intended to notify the user when a defined state transition occurs under the script's internal rules. They should be treated as workflow events, not as standalone trading instructions. KEY INPUTS Opening Range - Session Label - Opening Range Session - Timezone - Engine Timeframe - Range Extension Bars - Show Midline Quality Engine - Late Break Threshold - Acceptance Confirmation Bars - Break Search Window - Failure Tolerance - Relative Volume Length - Use Volume in Score Projected Targets - Show Targets - T1 / T2 / T3 - Target Multipliers - Target Ray Width - Target Label Style Style - Theme - State Labels - Background Tint - Label Size - Label Mode - Hero OR display - Acceptance Ribbon - Minimal OR Tag - Right-side layout controls Panel - Panel Position - Panel Font Size - Score Meter HOW THIS SCRIPT IS DIFFERENT This script is not meant to be a general-purpose support/resistance map, and it is not meant to be a broad break-retest engine applied to every chart structure. Its scope is narrower by design. The entire logic is centered on the Opening Range and what happens immediately after that range is established. Because of that, the script is more session-specific and more sequence-specific than many broader structure tools. It is also not a plain "Opening Range breakout = signal" overlay. A break can still be weak, late, accepted after retest, or rejected back into the range. That distinction is the core of the script. LIMITATIONS & TRANSPARENCY This is a rules-based interpretation tool, not a predictive model. The score is an internal quality estimate derived from the script's selected factors and thresholds. It should not be treated as an objective market truth. Opening Range behavior can vary significantly by instrument, volatility regime, session participation, and timeframe. A configuration that is useful on one symbol may not behave the same way on another. Projected targets are reference expansions based on the script's range logic. They are not guarantees, forecasts, or required destinations. Retest and acceptance behavior are also dependent on the selected engine timeframe. Lower engine timeframes may capture more detail, while higher ones may smooth some intrabar behavior. Users should review settings carefully and test the script on the instruments and sessions they actually follow. WHAT IT IS NOT This script is not: - a guarantee of breakout continuation - a promise that every accepted break will trend - a substitute for independent risk management - a standalone reason to enter or exit a trade - financial advice RISK DISCLOSURE This indicator is provided for educational and analytical use. All trading involves risk. Markets can reverse quickly, fail to follow through, or invalidate a setup even when a breakout initially looks constructive. Use the script as a structured chart-reading aid, not as a certainty engine. Position sizing, stop placement, execution quality, liquidity conditions, and broader market context remain the user's responsibility. If you use alerts, projected targets, or the quality score in a workflow, they should be interpreted within a broader decision process rather than in isolation.
Pine Script® indicator
by AGProLabs
2