Get started

Indicators and strategies

AMF PG Strategy v2.3AMF PG Strategy v2.3 1. Core Philosophy: Filtered and Volatility-Aware Trend Following "AMF PG Strategy" is an advanced trend-following system designed to adapt to the dynamic nature of modern markets. The strategy's core philosophy is not just to follow the trend but also to wait for the right conditions to enter the market. This is not a "black box." It is a rules-based framework that gives the user full control over various market filters. By requiring multiple conditions to be met simultaneously, the strategy aims to filter out low-quality signals and focus only on high-probability trend opportunities. 2. Core Engine: AMF PG Trend Following At the heart of the strategy is a proprietary, volatility-aware trend-following mechanism called AMF PG (Praetorian Guard). This engine operates as follows: Dynamic Bands: Creates a dynamic upper and lower band around the price that is constantly recalculated. The width of these bands is not fixed; It dynamically adjusts based on recent market volatility, volume flow, and price expansion. This adaptive structure allows the strategy to adapt to both calm and high-volatility markets. Entry Signals: A buy signal is triggered when the price rises above the upper band. A sell signal is triggered when the price falls below the lower band. However, these signals are executed only when all the active filters described below give the green light. Trailing Stop-Loss: When a position is entered, the opposite band automatically acts as a trailing stop-loss level. For example, when a buy position is opened, the lower band follows the price as a stop-loss. This allows for profit retention and trend continuation. 3. Multi-Layered Filter System: Understanding the Market The power of this strategy comes from its modular filter system, which allows the user to filter market conditions based on their own analysis. Each filter can be enabled or disabled individually in the settings: Filter 1: Trend Strength (ADX Filter): This filter confirms whether there is a strong trend in the market. It uses the ADX (Average Directional Index) indicator and only allows trades if the ADX value is above a certain threshold. This helps avoid trading in weak or directionless markets. It also confirms the direction of the trend by checking the position of the DMI (+DI and -DI) lines. Filter 2: Sideways Market (Chop Index Filter): This filter determines whether the market is excessively choppy or directionless. Using the Chop Index, this filter aims to protect against fakeouts by blocking trades when the market is highly indecisive. Filter 3: Market Structure (Hurst Exponent Filter): This is one of the strategy's most advanced filters. It analyzes the current market behavior using the Hurst Exponent. This mathematical tool attempts to determine whether a market tends to trend (permanent), tends to revert to the mean (anti-permanent), or moves randomly. This filter ensures that signals are generated only when market structure supports trending trades. 4. Risk Management: Maximum Drawdown Protection This strategy includes a built-in capital protection mechanism. Users can specify the percentage of their capital they will tolerate to decline from its peak. If the strategy's capital reaches this set drawdown limit, the protection feature is activated, closing all open positions and preventing new trades from being opened. This acts as an emergency brake to protect capital against unexpected market conditions. 5. Automation Ready: Customizable Webhook Alerts The strategy is designed for traders who want to automate their signals. From the Settings menu, you can configure custom alert messages in JSON format, compatible with third-party automation services (via Webhooks). 6. Strategy Backtest Information Please note that past performance is not indicative of future results. The published chart and performance report were generated on the 4-hour timeframe of the BTCUSD pair with the following settings: Test Period: January 1, 2016 - October 31, 2025 Default Position Size: 15% of Capital Pyramiding: Closed Commission: 0.0008 Slippage: 2 ticks (Please enter the slippage you used in your own tests) Testing Approach: The published test includes 423 trades and is statistically significant. It is strongly recommended that you test on different assets and timeframes for your own analysis. The default settings are a template and should be adjusted by the user for their own analysis.
Pine Script® strategy
by blntdmn
Candle Breakout StrategyShort description (one-liner) Candle Breakout Strategy — identifies a user-specified candle (UTC time), draws its high/low range, then enters on breakouts with configurable stop-loss, take-profit (via Risk:Reward) and optional alerts. Full description (ready-to-paste) Candle Breakout Strategy Version 1.0 — Strategy script (Pine v5) Overview The Candle Breakout Strategy automatically captures a single "range candle" at a user-specified UTC time, draws its high/low as a visible box and dashed level lines, and waits for a breakout. When price closes above the range high it enters a Long; when price closes below the range low it enters a Short. Stop-loss is placed at the opposite range boundary and take-profit is calculated with a user-configurable Risk:Reward multiplier. Alerts for entries can be enabled. This strategy is intended for breakout style trading where a clearly defined intraday range is established at a fixed time. It is simple, transparent and easy to adapt to multiple symbols and timeframes. How it works (step-by-step) On every bar the script checks the current UTC time. When the first bar that matches the configured Target Hour:Target Minute (UTC) appears, the script records that candle’s high and low. This defines the breakout range. A box and dashed lines are drawn on the chart to display the range and extended to the right while the range is active. The script then waits for price to close outside the box: Close > Range High → Long entry Close < Range Low → Short entry When an entry triggers: Stop-loss = opposite range boundary (range low for longs, range high for shorts). Take-profit = entry ± (risk × Risk:Reward). Risk is computed as the distance between entry price and stop-loss. After entry the range becomes inactive (waitingForBreakout = false) until the next configured target time. Inputs / Parameters Target Hour (UTC) — the hour (0–23) in UTC when the range candle is detected. Target Minute — minute (0–59) of the target candle. Risk:Reward Ratio — multiplier for computing take profit from risk (0.5–10). Example: 2 means TP = entry + 2×risk. Enable Alerts — turn on/off entry alerts (string message sent once per bar when an entry occurs). Show Last Box Only (internal behavior) — when enabled the previous box is deleted at the next range creation so only the most recent range is visible (default behavior in the script). Visuals & On-chart Info A semi-transparent blue box shows the recorded range and extends to the right while active. Dashed horizontal lines mark the range high and low. On-chart shapes: green triangle below bar for Long signals, red triangle above bar for Short signals. An information table (top-right) displays: Target Time (UTC) Active Range (Yes / No) Range High Range Low Risk:Reward Alerts If Enable Alerts is on, the script sends an alert with the following formats when an entry occurs: Long alert: 🟢 LONG SIGNAL Entry Price: Stop Loss: Take Profit: Short alert: 🔴 SHORT SIGNAL Entry Price: Stop Loss: Take Profit: Use TradingView's alert dialog to create alerts based on the script — select the script’s alert condition or use the alert() messages. Recommended usage & tips Timeframe: This strategy works on any timeframe but the definition of "candle at target time" depends on the chart timeframe. For intraday breakout styles, use 1m — 60m charts depending on the session you want to capture. Target Time: Choose a time that is meaningful for the instrument (e.g., market open, economic release, session overlap). All times are handled in UTC. Position Sizing: The script’s example uses strategy.percent_of_equity with 100% default — change default_qty_value or strategy settings to suit your risk management. Filtering: Consider combining this breakout with trend filters (EMA, ADX, etc.) to reduce false breakouts. Backtesting: Always backtest over a sufficiently large and recent sample. Pay attention to slippage and commission settings in TradingView’s strategy tester. Known behavior & limitations The script registers the breakout on close outside the recorded range. If you prefer intrabar breakout rules (e.g., high/low breach without close), you must adjust the condition accordingly. The recorded range is taken from a single candle at the exact configured UTC time. If there are missing bars or the chart timeframe doesn't align, the intended candle may differ — choose the target time and chart timeframe consistently. Only a single active position is allowed at a time (the script checks strategy.position_size == 0 before entries). Example setups EURUSD (Forex): Target Time 07:00 UTC — captures London open range. Nifty / Index: Target Time 09:15 UTC — captures local session open range. Crypto: Target Time 00:00 UTC — captures daily reset candle for breakout. Risk disclaimer This script is educational and provided as-is. Past performance is not indicative of future results. Use proper risk management, test on historical data, and consider slippage and commissions. Do not trade real capital without sufficient testing. Change log v1.0 — Initial release: range capture, box and level drawing, long/short entry by close breakout, SL at opposite boundary, TP via Risk:Reward, alerts, info table. If you want, I can also: Provide a short README version (2–3 lines) for the TradingView “Short description” field. Add a couple of suggested alert templates for the TradingView alert dialog (if you want alerts that include variable placeholders). Convert the disclaimer into multiple language versions.
Pine Script® strategy
by hashem-trader
Gold 15m: Trend + S/R + Liquidity Sweep (RR 1:2)This strategy is designed for short-term trading on XAUUSD (Gold) using the 15-minute timeframe. It combines trend direction, support/resistance pivots, liquidity sweep detection, and momentum confirmation to identify high-probability reversal setups in line with the dominant market trend. ⚙️ Core Logic: Trend Filter (EMA 200): The strategy only takes long positions when price is above the 200 EMA and short positions when price is below it. Support/Resistance via Pivots: Dynamic swing highs and lows are identified using pivot points. These act as local supply and demand levels where liquidity is likely to accumulate. Liquidity Sweep Detection: A bullish liquidity sweep occurs when price briefly breaks below the last pivot low (grabbing liquidity) and then closes back above it. A bearish sweep occurs when price breaks above the last pivot high and then closes back below. Momentum & Candle Strength: The strategy filters signals based on candle range and body size to ensure entries occur during strong price reactions, not weak retracements. Risk Management (1:2 RR): Stop-loss is placed slightly beyond the last pivot level using ATR-based buffers, and take-profit is set at 2× the risk distance, maintaining a reward-to-risk ratio of 1:2. 💼 Trade Logic Summary: Long Entry: After a bullish liquidity sweep & reclaim, momentum confirmation, and trend alignment (above EMA 200). Short Entry: After a bearish sweep & reclaim, momentum confirmation, and trend alignment (below EMA 200). Exit: Automated via ATR-based Stop Loss and Take Profit targets. 📊 Customization Options: Adjustable EMA length, pivot settings, ATR multipliers, and RR ratio. Option to enable/disable trend filter. Toggle display of S/R zones on chart. 🧠 Best Use: Works best during London and New York sessions when Gold shows strong momentum. Can be adapted for forex pairs and indices by tuning ATR and pivot parameters.
Pine Script® strategy
by phanongkumsen
VWAP & Band Cross Strategy v6 - AdvancedThese are a few updates made to the original script. The daily take profit and stop loss functions correctly for 1 contract but because of the pyramiding input even if not used you'll need to multiply the values by the number of contracts to keep consistent results. I have been unable to correct that function. Let me know if you test the script and have any recommendations for improvement. If trading an actual account I do recommend setting hard daily limits with your provider because there is still slippage from the original exit alerts even with the daily stop loss in place. 1. Real-Time Execution & Hard PnL Limits (The Focus) The most critical changes were implemented to ensure the daily profit and loss limits act as hard, real-time barriers instead of waiting for the candle to close. • Intrabar Tick Execution: The parameter calc_on_every_tick=true was added to the strategy() declaration. This forces the entire script to re-evaluate its logic on every single price update (tick), enabling immediate action. • Real-Time PnL Tracking: The PnL calculation was updated to track the total_daily_pnl by summing the realized profit/loss (from closed trades) and the unrealized profit/loss (strategy.openprofit) on every tick. • Immediate Closure: The script now checks the total_daily_pnl against the user-defined limits (daily_take_profit_value, daily_stop_loss_value) and immediately executes strategy.close_all() the moment the threshold is breached, preventing further trading. • Combined Risk Enforcement: The user-defined "Max Intraday Risk ($)" and the "Daily Stop Loss (Value)" are compared, and the script enforces the tighter of the two limits. 2. Visibility and External Alerting To address the unavoidable issue of slippage (which causes price overshoot in fast markets even with tick execution), dedicated alert mechanisms were added. • Dedicated Alert Condition: An alertcondition named DAILY PNL LIMIT REACHED was added. This allows you to set up a TradingView alert that triggers the instant the daily_limit_reached variable turns true, giving you the fastest possible notification. • Visual Marker: A large red triangle (\u25b2) is plotted on the chart using plotchar at the exact moment the daily limit condition is met, providing a clear visual confirmation of the trigger bar. 3. Strategy Features and Input Flexibility Several user-requested features were integrated to make the strategy more robust and customizable. • Trailing Stop / Breakeven (TSL/BE): A new exit option, Fixed Ticks + TSL, was added, allowing you to set a fixed profit target while also deploying a trailing stop or breakeven level based on points/ticks gained. • Multiple Exit Types: The exit strategy was expanded to include logic for several types: Fixed Ticks, ATR-based, Capped ATR-based, VWAP Cross, and Price/Band Crosses. • Pyramiding Control: An input Max Pyramiding Entries was introduced to control how many positions the strategy can have open at the same time. • Confirmation Logic Toggle: Added an input to choose how multiple confirmation indicators (RSI, SMMA, MACD) are combined: "AND" (all must be true) or "OR" (at least one must be true). • Indicator Confirmations: Logic for three external indicators—RSI, SMMA (EMA), and MACD—was fully integrated to act as optional filters for entry. • VWAP Reset Anchors: Logic was corrected to properly reset the VWAP calculation based on the selected period ("Daily", "Weekly", or "Session") by using Pine Script v6's required anchor series. Trading Day Filters: Inputs were added to select which specific days of the week the strategy is allowed to trade.
Pine Script® strategy
by mcward302
Gold H1 Breakout Failure (V11.0)This strategy is designed for trading XAU/USD (Gold) on the 1-hour timeframe. It identifies and trades fake breakouts of the Asian session range. The logic is simple yet effective: The script first marks the Asian session high and low. Once price breaks out of this range and closes outside, it waits for confirmation by watching for price to close back inside the range. When this re-entry occurs, the strategy takes a position in the opposite direction of the initial breakout, anticipating a false breakout or liquidity trap setup. By focusing on these fakeouts, the strategy aims to capture reversal momentum after liquidity sweeps, making it especially effective during sessions when volatility transitions from Asia to London or New York.
Pine Script® strategy
by MatthewRodrigues4
PriceAction & Economic StrategyThis indicator combines price-action logic with macroeconomic data to generate trading signals. Features: - Price-action signals: A bullish signal occurs when a candle closes above its open; a bearish signal occurs when a candle closes below its open. - Signal gap: The indicator includes an input called "Signal Gap (bars)" that defines the minimum number of bars between signals. By default the gap is set to 3, but you can adjust this between 1 and 10 to control signal frequency. - Alerts: The script defines alert conditions for long and short signals, allowing you to create TradingView alerts that notify you when a new signal occurs. - Economic data: The script uses TradingView's built-in `request.economic()` function to request U.S. GDP data. The GDP series is plotted in the Data Window for additional macroeconomic context. How to use: 1. Add the indicator to a chart. 2. Open the indicator's settings and adjust the "Signal Gap (bars)" input to set the minimum bar gap between signals. 3. Look for green triangles plotted below the bars (bullish signals) and red triangles plotted above the bars (bearish signals). These appear only when the gap criterion is met. 4. If you want alerts, click the Alert button in TradingView, select this indicator, and choose either the Long or Short alert conditions. 5. To view the GDP data, open the Data Window; the GDP value will be shown alongside other series for each bar. 6. Use these signals in combination with your own analysis; this indicator is for educational purposes and does not constitute financial advice.
Pine Script® strategy
by knowledgejoe
NLR-ADX Divergence Strategy Triple-ConfirmedHow it works Builds a cleaner DMI/ADX Recomputes classic +DI, −DI, ADX over a user-set length. Then “non-linear regresses” each series toward a mean (your choice: dynamic EMA of the series or a fixed Static Mid like 50). The further a value is from the mean, the stronger the pull (controlled by alphaMin/alphaMax and the γ exponent), giving smoother, more stable DI/ADX lines with less whipsaw. Optional EMA smoothing on top of that. Lock in values at confirmed pivots Uses price pivots (left/right bars) to confirm swing lows and highs. When a pivot confirms, the script captures (“freezes”) the current +DI, −DI, and ADX values at that bar and stores them. This avoids later drift from smoothing/EMAs. Check for triple divergence For a bullish setup (potential long): Price makes a Lower Low vs. a prior pivot low, +DI is higher than before (bulls quietly stronger), −DI is lower (bears weakening), ADX is lower (trend fatigue). For a bearish setup (potential short) Price makes a Higher High, +DI is lower, −DI is higher, ADX is lower. Adds a “no-intersection” sanity check: between the two pivots, the live series shouldn’t snake across the straight line connecting endpoints. This filters messy, low-quality structures. Trade logic On a valid triple-confirm, places a strategy.entry (Long for bullish, Short for bearish) and optionally labels the bar (BUY or SELL with +DI/−DI/ADX arrows). Simple flip behavior: if you’re long and a new short signal prints (or vice versa), it closes the open side and flips. Key inputs you can tweak Custom DMI Settings DMI Length — base length for DI/ADX. Non-Linear Regression Model Mean Reference — EMA(series) (dynamic) or Static mid (e.g., 50). Dynamic Mean Length & Deviation Scale Length — govern the mean and scale used for regression. Min/Max Regression & Non-Linearity Exponent (γ) — how strongly values are pulled toward the mean (stronger when far away). Divergence Engine Pivot Left/Right Bars — how strict the swing confirmation is (larger = more confirmation, more delay). Min Bars Between Pivots — avoids comparing “near-duplicate” swings. Max Historical Pivots to Store — memory cap.
Pine Script® strategy
by Cmo22
Trend Pullback System```{"variant":"standard","id":"36492","title":"Trend Pullback System Description"} Trend Pullback System is a price-action trend continuation model that looks to enter on pullbacks, not breakouts. It’s designed to find high-quality long/short entries inside an already established trend, place the stop at meaningful structure, trail that stop as structure evolves, and warn you when the trade thesis is no longer valid. Developed by: Mohammed Bedaiwi --------------------------------- HOW IT WORKS --------------------------------- 1. Trend Detection • The strategy defines overall bias using moving averages. • Bullish environment (“uptrend”): price above the slower MA, fast MA above slow MA, and the slow MA is sloping up. • Bearish environment (“downtrend”): price below the slower MA, fast MA below slow MA, and the slow MA is sloping down. This prevents trading against chop and focuses on continuation moves in the dominant direction. 2. Pullback + Re-entry Logic • The script waits for price to pull back into structure (support in an uptrend, resistance in a downtrend), and then push back in the direction of the main trend. • That “push back” is the setup trigger. We don’t chase the first breakout candle — we buy/sell the retest + resume. 3. Structural Levels (“Diamonds”) • Green diamond (below bar): bullish pivot low formed while the trend is bullish. This marks defended support. - Use it as a re-entry zone for longs. - Use it to trail a stop higher when you’re already long. - Shorts can take profit here because buyers stepped in. • Red diamond (above bar): bearish pivot high formed while the trend is bearish. This marks defended resistance. - Use it as a re-entry zone for shorts. - Use it to trail a stop lower when you’re already short. - Longs can take profit here because sellers stepped in. 4. Entry Signals • BUY arrow (green triangle up under the candle, text like “BUY” / “BUY Zone”): - LongSetup is true. - Trend is bullish or turning bullish. - Price just bounced off recent defended support (green diamond) and reclaimed short-term momentum. Meaning: enter long here or cover/exit shorts. • SELL arrow (red triangle down above the candle): - ShortSetup is true. - Trend is bearish or turning bearish. - Price just rolled down from defended resistance (red diamond) and lost short-term momentum. Meaning: enter short here or take profit on longs. These are the primary trade entries. They are meant to be actionable. 5. Weak Setups (“W” in yellow) • Yellow triangle with “W”: - A possible long/short idea is trying to form, BUT the higher-timeframe confirmation is not fully there yet. - Think of it as early pressure / early caution, not a full signal. • You usually watch these areas rather than jumping in immediately. 6. Exit Warning (orange “EXIT” label above a bar) • The strategy will raise an EXIT marker when you’re in a trade and the *opposite* side just produced a confirmed setup. - You’re short and a valid longSetup appears → EXIT. - You’re long and a valid shortSetup appears → EXIT. • This is basically: “Close or reduce — the other side just took control.” • It’s not just a trailing stop hit; it’s a regime flip warning. 7. Stop, Target, and Trailing • On every new setup, the script records: - Initial stop: recent swing beyond the defended level (below support for longs, above resistance for shorts). - Initial target: recent opposing swing. • While you’re in position, if new confirming diamonds print in your favor, the stop can trail toward the new defended level. • This creates structure-based risk management (not just fixed % or ATR). 8. Reference Levels • The strategy also plots prior higher-timeframe closes (last week’s close, last month’s close, last year’s close). These can behave as magnets or stall points. • They’re helpful for take-profit timing and for reading “are we trading above or below last month’s close?” 9. Momentum Panel (hidden by default) • Internally, the script calculates an SMI-style momentum oscillator with overbought/oversold zones. • This is optional visual confirmation and does not drive the core entry/exit logic. --------------------------------- WHAT A TRADE LOOKS LIKE IN REAL PRICE ACTION --------------------------------- Early warning • Yellow W + red diamonds + red down arrows = “This is getting weak. Short setups are here.” • You may also see something like “My Short Entry Id.” That’s where the short side actually engages. Bearish follow-through, then exhaustion • Price bleeds down. • Then the orange EXIT appears. → Translation: “If you’re still short, close it. Buyers are stepping in hard. Risk of reversal is now high.” Regime flip • Right after EXIT, multiple green BUY arrows fire together (“BUY”, “BUYZone”). • That’s the true long trigger. → This is where you either enter long or flip from short to long. Expansion leg • After that flip, price rips up for multiple candles / days / weeks. • While it runs: - Green diamonds appear under pullbacks → “dip buy zones / trail stop up here.” - More BUY arrows show on minor pullbacks → continuation long / scale adds. Distribution / topping • Later, you start seeing new yellow W triangles again near local highs. That’s your “careful, this might be topping” warning. • You finally get a hard red candle, and green diamonds stop stacking. → That’s where you tighten risk, scale out, or assume the move is mature. In plain terms, the model is doing the following for you: • It puts you short during weakness. • It tells you when to get OUT of the short. • It flips you long right as control changes. • It gives you a structure-based trail the whole way up. • It warns you again when momentum at the top starts cracking. That is exactly how the logic was designed. --------------------------------- QUICK INTERPRETATION CHEAT SHEET --------------------------------- 🔻 Red triangle + “Short Entry” near a red diamond → Short entry zone (or take profit on a long). 🟥 Red diamond above bar → Sellers defended here. Treat it as resistance. Good place to trail short stops just above that level. Avoid chasing longs straight into it. 🟨 Yellow W → Attention only. Early pressure / possible turn. Not fully confirmed. 🟧 EXIT (orange label) → The opposite side just printed a real setup. Close the old idea (cover shorts if you’re short, exit longs if you’re long). Thesis invalid. 🟩 Burst of green BUY triangles after EXIT → Long entry. Also a “cover shorts now” alert. This is the core money entry in bullish reversals. 💎 Green diamond below bar → Bulls defended that level. Good for trailing your long stop up, and good “buy the dip in trend” locations. 📈 Blue / teal MAs stacked and rising → Confirmed bullish structure. You’re in trend continuation mode, so dips are opportunities, not automatic exits. --------------------------------- COLOR / SHAPE KEY --------------------------------- • Green triangle up (“BUY”, “BUY Zone”): Long entry / cover shorts / continuation long trigger. • Red triangle down: Short entry / take profit on longs / continuation short trigger. • Orange “EXIT” label: Opposite side just fired a real setup. The previous trade thesis is now invalid. • Green diamond below price: Bullish defended support in an uptrend. Use for dip buys, trailing stops on longs, and objective cover zones for shorts. • Red diamond above price: Bearish defended resistance in a downtrend. Use for re-entry shorts, trailing stops on shorts, and objective scale-out zones for longs. • Yellow “W”: Weak / early potential setup. Watch it, don’t blindly trust it. • Moving average bands (fast MA, slow MA, Hull MA): When stacked and rising, bullish control. When stacked and falling, bearish control. --------------------------------- INTENT --------------------------------- This system is built to: • Trade with momentum, not against it. • Enter on pullbacks into proven structure, not chase stretched breakouts. • Automate stop/target logic around actual defended swing levels. • Warn you when the other side takes over so you don’t give back gains. Typical usage: 1. In an uptrend, wait for price to pull back, print a green diamond (support proved), then take the first BUY arrow that fires. 2. In a downtrend, wait for a bounce into resistance, print a red diamond (sellers proved), then take the first SELL arrow that fires. 3. Respect EXIT when it appears — that’s the model saying “this trade is done.” --------------------------------- DISCLAIMER --------------------------------- This script is for educational and research purposes only. It is not financial advice, investment advice, or a recommendation to buy or sell any security, cryptoasset, or derivative. Markets carry risk. Past performance does not guarantee future results. You are fully responsible for your own decisions, position sizing, risk management, and compliance with all applicable laws and regulations.
Pine Script® strategy
by mbedaiwi2
Mean Reversion Trading V1Overview This is a simple mean reversion strategy that combines RSI, Keltner Channels, and MACD Histograms to predict reversals. Current parameters were optimized for NASDAQ 15M and performance varies depending on asset. The strategy can be optimized for specific asset and timeframe. How it works Long Entry (All must be true): 1. RSI < Lower Threshold 2. Close < Lower KC Band 3. MACD Histogram > 0 and rising 4. No open trades Short Entry (All must be true): 1. RSI > Upper Threshold 2. Close > Upper KC Band 3. MACD Histogram < 0 and falling 4. No open trades Long Exit: 1. Stop Loss: Average position size x ( 1 - SL percent) 2. Take Profit: Average position size x ( 1 + TP percent) 3. MACD Histogram crosses below zero Short Exit: 1. Stop Loss: Average position size x ( 1 + SL percent) 2. Take Profit: Average position size x ( 1 - TP percent) 3. MACD Histogram crosses above zero Settings and parameters are explained in the tooltips. Important Initial capital is set as 100,000 by default and 100 percent equity is used for trades
Pine Script® strategy
by Sivchay
Iriza4 -DAX EMA+HULL+ADX TP40 SL205 MIN SKALP. Additional filters improve accuracy: the strategy blocks trades after too many consecutive bullish or bearish candles (streak filter) and ignores signals when price is too far from the EMA (measured by ATR distance). Each position uses a fixed risk-to-reward ratio of 1 : 2 with clear stop-loss and take-profit targets, without partial exits or breakevens. The goal is to identify clean pullbacks inside strong trends and filter out late or exhausted entries
Pine Script® strategy
by Radoje1984
XAUUSD 5m — NY Supertrend+RSI Optimizer (1:2 RR) — $240k/orderThis strategy is built for XAUUSD (Gold) on the 5-minute timeframe, focusing exclusively on the New York trading session (08:00–17:00 NY time) — the most volatile and liquid hours of the day. It combines a Supertrend trend filter with RSI momentum signals to identify high-probability entries, using a 1:2 risk–reward ratio for disciplined trade management. 🧠 Strategy Logic: Buy Condition: RSI crosses above 55 while Supertrend indicates an uptrend Sell Condition: RSI crosses below 45 while Supertrend indicates a downtrend Session Filter: Trades only between 08:00 → 17:00 New York time Risk/Reward: 1:2 (Take-Profit = 2× Stop-Loss distance from Supertrend line) Position Size: $240,000 notional per order Auto-Exit: Closes all trades at NY session end ⚡ Highlights: Targets NY session volatility Combines trend + momentum for cleaner entries Strict 1:2 RR for consistent outcomes Avoids overnight exposure ⚠️ Disclaimer: This script is intended for educational and research purposes only. Past performance is not indicative of future results. Always forward-test on demo before using live capital.
Pine Script® strategy
by legalPepper72284
XAUUSD 5m — CET 13:00→01:00 Supertrend + RSI (1:2 RR) — $240KThis strategy is designed for XAUUSD (Gold) on the 5-minute chart, optimized for trading during the most active hours (13:00–01:00 CET). It combines a Supertrend direction filter with RSI crossovers for precise entries, and applies a 1:2 risk–reward ratio for consistent risk management. 🧠 Logic Overview: Buy Signal: RSI crosses above 55 while Supertrend is bullish Sell Signal: RSI crosses below 45 while Supertrend is bearish Trading Hours: 13:00 → 01:00 CET (corresponding to 07:00 → 19:00 New York time) Risk Management: Fixed 1:2 RR (TP = 2× SL distance from Supertrend line) Session Management: Automatically closes all trades after 01:00 CET Order Size: $240,000 notional exposure per position 💡 Best used for: Scalping or intraday trading on XAUUSD during high-volatility hours. The setup works best when combined with strong price action or volume confirmation. ⚠️ Disclaimer: This script is for educational and testing purposes only. Past performance does not guarantee future results. Always test on demo before using live funds.
Pine Script® strategy
by legalPepper72284
Trendline Breakout Strategy Strategy should place entries & exits so that it can be backtested (use strategy.entry and strategy.exit with explicit stop and limit prices). Include an option for fixed percent position sizing and an option for fixed contract size. Draw the trendline on the chart (with option to hide/show) and add labels that show: bias (Bull/Bear), trendline slope, entry price, SL, TP and the reason (e.g., "Trendline Breakout"). Provide user inputs for: EMA length (default 200), lookback for pivot detection, pivot sensitivity (left/right bars), quantity mode (percent / contracts), risk percent or fixed size, enable/disable backtest prints, and enable alerts. Avoid repainting: use confirmed pivot logic (pivot detection must use completed bars) and only take entry after breakout confirmed on close. Document any limitations (for example, trendline using two highest/highest bars inside lookback is approximate). Add clear comments, helpful variable names, and include example alertcondition lines for entry and exit signals.
Pine Script® strategy
by chandolaamit
FluxVector Liquidity Universal Trendline FluxVector Liquidity Trendline FFTL Summary in one paragraph FFTL is a single adaptive trendline for stocks ETFs FX crypto and indices on one minute to daily. It fires only when price action pressure and volatility curvature align. It is original because it fuses a directional liquidity pulse from candle geometry and normalized volume with realized volatility curvature and an impact efficiency term to modulate a Kalman like state without ATR VWAP or moving averages. Add it to a clean chart and use the colored line plus alerts. Shapes can move while a bar is open and settle on close. For conservative alerts select on bar close. Scope and intent • Markets. Major FX pairs index futures large cap equities liquid crypto top ETFs • Timeframes. One minute to daily • Default demo used in the publication. SPY on 30min • Purpose. Reduce false flips and chop by gating the line reaction to noise and by using a one bar projection • Limits. This is a strategy. Orders are simulated on standard candles only Originality and usefulness • Unique fusion. Directional Liquidity Pulse plus Volatility Curvature plus Impact Efficiency drives an adaptive gain for a one dimensional state • Failure mode addressed. One or two shock candles that break ordinary trendlines and saw chop in flat regimes • Testability. All windows and gains are inputs • Portable yardstick. Returns use natural log units and range is bar high minus low • Protected scripts. Not used. Method disclosed plainly here Method overview in plain language Base measures • Return basis. Natural log of close over prior close. Average absolute return over a window is a unit of motion Components • Directional Liquidity Pulse DLP. Measures signed participation from body and wick imbalance scaled by normalized volume and variance stabilized • Volatility Curvature. Second difference of realized volatility from returns highlights expansion or compression • Impact Efficiency. Price change per unit range and volume boosts gain during efficient moves • Energy score. Z scores of the above form a single energy that controls the state gain • One bar projection. Current slope extended by one bar for anticipatory checks Fusion rule Weighted sum inside the energy score then logistic mapping to a gain between k min and k max. The state updates toward price plus a small flow push. Signal rule • Long suggestion and order when close is below trend and the one bar projection is above the trend • Short suggestion and flip when close is above trend and the one bar projection is below the trend • WAIT is implicit when neither condition holds • In position states end on the opposite condition What you will see on the chart • Colored trendline teal for rising red for falling gray for flat • Optional projection line one bar ahead • Optional background can be enabled in code • Alerts on price cross and on slope flips Inputs with guidance Setup • Price source. Close by default Logic • Flow window. Typical range 20 to 80. Higher smooths the pulse and reduces flips • Vol window. Typical range 30 to 120. Higher calms curvature • Energy window. Typical range 20 to 80. Higher slows regime changes • Min gain and Max gain. Raise max to react faster. Raise min to keep momentum in chop UI • Show 1 bar projection. Colors for up down flat Properties visible in this publication • Initial capital 25000 • Base currency USD • Commission percent 0.03 • Slippage 5 • Default order size method percent of equity value 3% • Pyramiding 0 • Process orders on close off • Calc on every tick off • Recalculate after order is filled off Realism and responsible publication • No performance claims • Intrabar reminder. Shapes can move while a bar forms and settle on close • Strategy uses standard candles only Honest limitations and failure modes • Sudden gaps and thin liquidity can still produce fast flips • Very quiet regimes reduce contrast. Use larger windows and lower max gain • Session time uses the exchange time of the chart if you enable any windows later • Past results never guarantee future outcomes Open source reuse and credits • None
Pine Script® strategy
by exlux
VWAP & Band Cross Strategy v6VWAP & Band Cross Strategy v6: Script Summary This Pine Script implements a highly flexible, multi-layered trading strategy centered around the Volume Weighted Average Price (VWAP) and its associated Standard Deviation Bands. The strategy is designed to test various entry/exit models based on how the price interacts with the central VWAP line and the upper/lower volatility bands, with extensive risk management and confirmation filters. 1. Core Mechanics (VWAP & Bands) VWAP Calculation: Calculates the VWAP based on a user-defined source (default is the close price). Standard Deviation Bands: Creates upper and lower bands by calculating the standard deviation of the price (over 20 periods by default) and multiplying it by a user-defined Multiplier (default is 2.0). These bands dynamically expand and contract with volatility. Plotting: The script clearly plots the VWAP (purple), the Upper Band (green), and the Lower Band (red), with a colored fill between the bands. 2. Entry Triggers The core entry logic is based on a single, user-selected cross event between the price and the VWAP/Bands. The user can choose from six predefined entry types: Entry Type Category Entry Trigger (Long) Entry Trigger (Short) Mean Reversion Price crosses over the Lower Band. Price crosses under the Upper Band. Trend Following Price crosses over the Upper Band (Breakout). Price crosses under the Lower Band (Breakout). VWAP Cross Price crosses over the VWAP. Price crosses under the VWAP. 3. Filters and Confirmation Trades are only executed if they pass a series of optional filters, making the strategy highly customizable: Technical Confirmation (Optional): Users can enable and configure up to three additional indicators that must align with the trade direction: RSI: Price must be Oversold (for Long) or Overbought (for Short). SMMA: Price must be above the SMMA (for Long) or below (for Short). MACD: MACD line must cross the Signal line and the Histogram must be positive/negative. Time and Day Filters: Trades are restricted to a defined Entry Start/End Hour/Minute window, and only execute on user-selected Trading Days of the week. Trade Direction: Can be toggled to execute Long Only, Short Only, or Both. 4. Advanced Risk Management (Daily Limits) The strategy incorporates robust daily limits that reset at a configured Daily Reset Hour/Minute: Daily Profit/Loss Limits: If the running total of Realized PnL (closed trades) + Unrealized PnL (open position) exceeds a user-defined Daily Take Profit (in Ticks) or falls below the Daily Stop Loss (in Ticks), the strategy locks out new trades and immediately closes any open position. Max Daily Trades: Prevents the strategy from entering more than a specified number of trades per day. 5. Exit Logic The strategy exit is also highly configurable via the Exit Type setting: Fixed Ticks / ATR / Capped ATR: If one of these is selected, the script calculates a static Stop Loss and Take Profit level upon entry, using either fixed tick values or dynamic values based on the Average True Range (ATR), which are then executed using Pine Script's strategy.exit function. Cross Exits (VWAP/Bands): If selected, the position is closed when the price crosses the VWAP or a specific band in the opposite direction. End-of-Day Close: An unconditional exit that closes all open positions at a user-defined Close All Hour/Minute, regardless of profit/loss or limit status, preventing positions from being held overnight.
Pine Script® strategy
by mcward302