Get started

Exponential Moving Average (EMA)

VWAP Stoplight CloudVWAP Stoplight Cloud (VSC-AITD) — “One Shot” Discipline, Sniper Execution Most traders don’t lose because they can’t find setups — they lose because they take too many. This indicator is built to do the opposite: reduce triggers, raise standards, and only light up when conditions are stacked. One clean window. One clear read. One decisive action. This is a sniper scope for intraday structure: it helps you avoid “spray and pray” entries by requiring alignment across trend + VWAP + ADX/DI + EMA50 verification before it shows a true green/red state. What it’s best at Filtering chop and “looks good” fakeouts by demanding proof (strength + direction + location). Clean bias control: you stop debating direction when the stoplight is clear. Executing only the highest-quality VWAP moments: reclaim/reject signals are verified using DI thrust logic to avoid weak crosses. Simple visual confirmation on the main chart: trend cloud, stoplight UI, and prior-day levels for structure. Core Components (what you actually get) 1) Stoplight Engine (SSOT) A single source-of-truth state machine that outputs: GO GREEN (bull control) GO RED (bear control) WATCH / CAUTION (trend exists but not fully confirmed) NEUTRAL (no edge) 2) Stoplight-Aligned Cloud Cloud turns GREEN only when GO GREEN is true Cloud turns RED only when GO RED is true Otherwise it stays GRAY So the cloud is not a mood ring — it’s an execution filter. 3) VWAP Verified Reclaim / Reject (DI Thrust Confirm) Not every VWAP cross matters. This script uses a locked 2-bar DI thrust threshold (1.25) to confirm that the reclaim/reject had real force, not a weak drift. You get optional purple arrows: VWAP Reclaim VERIFIED ↑ VWAP Reject VERIFIED ↓ 4) Prior Day Levels (PDH / PDL / PDC) Single daily security call plots: PDH (previous day high) PDL (previous day low) PDC (previous day close) These are practical “map levels” for decision points and alerting. 5) Alerts (Execution Tier) Built-in alerts are intentionally not spammy and are filtered to reduce noise: VWAP Reclaim VERIFIED ↑ (only when GO GREEN) VWAP Reject VERIFIED ↓ (only when GO RED) PDH Break ↑ (only when GO GREEN) PDL Break ↓ (only when GO RED) Alerts are restricted to Weekdays + Regular Trading Hours (09:30–16:00 ET). How to use it (fast): Trade with the stoplight, not your feelings. When GO GREEN: Favor long bias, pullbacks, reclaim holds, PDH breaks. When GO RED: Favor short-bias instruments/puts, rejects, breakdowns under PDL. When WATCH/CAUTION/GRAY: That’s not a “maybe.” That’s a no shot. Stand down. Toggle VWAP display (default OFF) Toggle verified VWAP arrows Toggle HMA cloud, EMA50 verification, prior-day levels ADX Min (your strength floor) Stoplight UI position Important Notes: This is a decision aid, not financial advice and not a prediction engine. No indicator guarantees profit. Market conditions change. Always confirm liquidity, spreads, and risk sizing for your instrument and timeframe. Not investment advice. Educational tool only.
Pine Script® indicator
by TheAITradingDesk
The Perfect MA: 50 & 200 Daily MAThe Perfect MA: 50 & 200 Daily MA A simple, trend-focused moving average overlay that always plots the daily 50 and daily 200 moving averages—no matter what timeframe your chart is on. This lets you keep the two most common long-term trend references visible even when trading intraday. Designed to be clean, to focus on the two MAs most traders track, without unnecessary options. You can set alerts, not to miss any golden crosses or death crosses, or when price crosses any of the MAs. What it plots 50-day MA (toggle on/off) 200-day MA (toggle on/off) Both are calculated on the Daily (“D”) timeframe and then displayed on your chart, always using daily, irrespective of timeframe on your chart. MA calculation Choose SMA (classic, equal weighting) or EMA (reacts faster to give more weight on recent price). The selected type applies to both the 50 and 200. Visual options Distance table (optional) : Shows the % distance of current price vs. the 50D and 200D MA. Useful to spot when price is stretched far above/below long-term averages (mean reversion context) Golden Cross / Death Cross markers (optional) - Golden Cross: 50D crosses above 200D (often treated as bullish regime shift) -Death Cross: 50D crosses below 200D (often treated as bearish regime shift) Fill between the MAs (optional) : Green shading when 50D > 200D and red shading when 50D < 200D Alerts included Golden Cross Death Cross Price crossing the 50D MA Price crossing the 200D MA
Pine Script® indicator
by TomArven
SMC Precision Scalper# SMC Precision Scalper - All-in-One Smart Money Analysis Tool ## Overview SMC Precision Scalper is a comprehensive technical analysis indicator combining Smart Money Concepts (SMC) methodology with advanced scalping tools. This indicator integrates institutional trading concepts to provide traders with high-probability confluence zones and market structure analysis. --- ## How It Works - Technical Methodology ### Order Block Detection System **Detection Algorithm:** The script identifies Order Blocks using a three-criteria validation process: 1. **Pattern Recognition**: Scans for consolidation candles (opposite color to trend) that precede strong impulse moves 2. **Impulse Validation**: The following candle must break the high/low of the consolidation candle - Strict Mode: Impulse candle must fully engulf the Order Block - Standard Mode: Impulse candle must only break the OB high/low 3. **Volatility Filtering**: Applies ATR (Average True Range) or CMR (Cumulative Mean Range) filters with adjustable multiplier (default 0.5x) to eliminate noise **Mitigation Tracking:** Order Blocks are monitored until price retraces to their 50% level (midpoint). Mitigation can be calculated by either: - Close price crossing the midpoint - Wick penetration of the midpoint Internal Order Blocks use shorter swing length (default 5 periods) for intraday precision, while standard OBs use longer swings (default 10 periods) for structural zones. --- ### Fair Value Gap (FVG) Calculation **Gap Detection:** FVGs are identified when: Bullish FVG: (candle.low - candle.high) > ATR(14) × threshold ​ Bearish FVG: (candle.low - candle.high) > ATR(14) × threshold ​ Default threshold: 0.3x ATR multiplier **Visual Rendering:** Each FVG is rendered as 13 horizontal layers to show the liquidity void depth. The script tracks consecutive FVGs to adjust layer positioning dynamically. **Mitigation Logic:** FVGs remain active until price fully crosses the gap zone (high > gap bottom AND low < gap top). Optionally displays "filled" FVGs with reduced opacity for historical reference. --- ### EMA Confluence & Flips System **Core Components:** - EMA Fast: 5-period exponential moving average - EMA Slow: 12-period exponential moving average - EMA Confluence: 200-period exponential moving average (customizable) **Flip Detection:** Generates signals when EMA 5 crosses EMA 12: - Flip Up (↑): EMA 5 crosses above EMA 12 - Flip Down (↓): EMA 5 crosses under EMA 12 **Trend Filter:** Optional confluence filter requires: - Uptrend confirmation: Close > EMA Confluence for N bars (adjustable) - Downtrend confirmation: Close < EMA Confluence for N bars This prevents counter-trend signals and improves accuracy. --- ### EMA Cloud Layers **Calculation:** Creates three multi-timeframe cloud zones using paired EMAs: - Cloud 1: EMA 20 / EMA 42 - Cloud 2: EMA 8 / EMA 23 - Cloud 3: EMA 5 / EMA 50 **Color Logic:** - Green cloud: Faster EMA > Slower EMA (bullish momentum) - Red cloud: Faster EMA < Slower EMA (bearish momentum) Each cloud has progressive transparency (10%, 16%, 22%) to show momentum strength layers. --- ### VWAP Implementation **Session VWAP:** Calculates volume-weighted average price that resets at each session boundary using TradingView's native `ta.vwap()` function. **Daily VWAP:** Custom implementation that resets every calendar day: CumulativePV = Σ(Price × Volume) CumulativeV = Σ(Volume) Daily VWAP = CumulativePV / CumulativeV Source price options: HLC3, Close, OHLC4, HL2 --- ### Premium/Discount Zones **Range Calculation:** Based on selected mode (Trailing Swings, Daily/Weekly/Monthly Range): - High 100% = Swing high or HTF high - Low 0% = Swing low or HTF low - Range = High - Low **Zone Division:** *3 Zones Simple Mode:* - Premium: 66.67% - 100% - Equilibrium: 33.33% - 66.67% - Discount: 0% - 33.33% *5 Zones Fibonacci Mode:* - Strong Premium: 78.6% - 100% - Premium: 61.8% - 78.6% (OTE Zone) - Equilibrium: 38.2% - 61.8% - Discount: 23.6% - 38.2% - Strong Discount: 0% - 23.6% **Purpose:** Provides institutional context: institutions typically buy in Discount zones and sell in Premium zones. --- ### Fibonacci Retracement **Auto-Calculation:** - Scans the last N periods (default 80, range 20-200) to identify swing high and swing low - Projects key Fibonacci levels: 0%, 23.6%, 38.2%, 50%, 61.8%, 78.6%, 100% - Optional inversion for downtrends - Future projection extends levels forward by adjustable bars (default 50) **OTE Zone Highlighting:** Creates a visual box for the 61.8%-78.6% zone, which represents the Optimal Trade Entry area commonly used in ICT methodology. --- ### Ichimoku Cloud (Multi-Timeframe) **Components Calculation:** Tenkan-sen = (9-period high + 9-period low) / 2 Kijun-sen = (26-period high + 26-period low) / 2 Senkou Span A = (Tenkan + Kijun) / 2 Senkou Span B = (52-period high + 52-period low) / 2 Chikou Span = Close shifted back 26 periods **MTF Implementation:** Uses `request.security()` to fetch higher timeframe data when custom timeframe is specified. Falls back to chart timeframe if empty. **Cloud Filtering:** - Price above cloud = Bullish bias filter - Price below cloud = Bearish bias filter - Price in cloud = Neutral/avoid --- ### Market Structure Detection **BOS (Break of Structure):** Occurs when price breaks the last swing high (in uptrend) or swing low (in downtrend), confirming trend continuation. **MSS (Market Structure Shift):** Detected when BOS occurs in the opposite direction of current trend, indicating potential reversal. **CHoCH (Change of Character):** Early warning signal when price touches but doesn't strongly break the previous swing, suggesting momentum loss. --- ### Previous Day Levels **Calculation:** Uses `request.security()` with daily timeframe and ` ` offset with lookahead on: - PDH: Previous Day High - PDL: Previous Day Low - PDM: (PDH + PDL) / 2 **Daily Bias Logic:** - Bullish: Close > PDM or breakout above PDH - Bearish: Close < PDM or breakdown below PDL - Neutral: Close at PDM --- ## Why This Combination? This indicator integrates multiple institutional concepts to create a **confluence-based filtering system** that answers three critical trading questions: 1. **WHERE to trade?** (Order Blocks, FVG, Premium/Discount zones, Fibonacci OTE) 2. **WHEN to trade?** (EMA Flips, Market Structure breaks, Ichimoku confirmation) 3. **WHICH direction?** (HTF Bias, Daily Bias, Cloud momentum, Structure trend) ### Synergy Between Components: - **OB + FVG Confluence**: When an Order Block overlaps with a Fair Value Gap, it creates a high-probability institutional zone - **Premium/Discount Context**: Filters OB signals to match institutional bias (buy Discount, sell Premium) - **EMA Flips + Structure**: Fast momentum signals (flips) confirmed by slower structure breaks reduce false entries - **Ichimoku Cloud**: Acts as additional trend filter, preventing counter-cloud trades - **VWAP + Fibonacci**: Provides dynamic and static mean reversion levels for risk management **Individual indicators might generate conflicting signals**, but this mashup requires multiple confirmations before highlighting setups, significantly reducing noise and improving trade quality. --- ## How to Use ### Setup Configuration 1. **Enable desired components** in settings (Essentials group) 2. **Adjust swing lengths** based on timeframe: - M1-M5: Swing 5-7, Internal 3 - M15-H1: Swing 10, Internal 5 (default) - H4-D1: Swing 15-20, Internal 7-10 3. **Configure filters**: - Lower timeframes: Use ATR filter 0.3-0.5x - Higher timeframes: Use CMR filter or 0.7-1.0x ATR ### Trading Workflow **Step 1: Identify Trend** - Check EMA Cloud colors (green = bullish, red = bearish) - Confirm with Ichimoku Cloud position - Verify Market Structure (BOS direction) **Step 2: Find Confluence Zones** - Locate active Order Blocks in trend direction - Check for FVG overlap with OB - Ensure zone is in correct Premium/Discount area **Step 3: Wait for Entry Trigger** - Monitor EMA 5/12 flips within confluence zone - Check Fibonacci OTE zone if displayed - Confirm VWAP position supports direction **Step 4: Execute & Manage** - Enter on flip signal within OB/FVG confluence - Stop loss: Outside Order Block zone - Target: Opposite Premium/Discount zone or next OB --- ## Dashboard Information The on-chart table displays real-time market conditions: - **Trend**: Current structure (Bullish/Bearish/Neutral) - **HTF Bias**: Higher timeframe direction - **OB**: Active Order Block status (Bull ↑ / Bear ↓ / None) - **FVG**: Active Fair Value Gap (Bull ↑ / Bear ↓ / None) - **OB+FVG**: Confluence confirmation (✓ when both align) - **P/D Zone**: Current price position in Premium/Discount - **Fib 61.8-78.6**: OTE zone status (In Zone / Outside) - **Daily Bias**: ICT daily bias (Bullish/Bearish/Neutral) - **Market Status**: Overall condition summary - **RSI(14)**: Momentum (Oversold <30 / Neutral / Overbought >70) - **Ichimoku**: Cloud position (Above/In/Below) --- ## Alert Conditions Complete alert system for key events: - BOS Bullish / Bearish detected - New Order Block formed (Bullish/Bearish) - New Internal OB formed - EMA Flip signals (Up/Down) - Price entering OTE zone (when HTF aligned) --- ## Best Practices ✅ **Use on multiple timeframes**: Align HTF bias with entry TF signals ✅ **Wait for confluence**: At least 2-3 confirmations before entry ✅ **Respect Premium/Discount**: Don't buy Premium or sell Discount ✅ **Adjust swing lengths**: Match to your trading timeframe ✅ **Backtest first**: Understand signal behavior before live trading ❌ **Don't overtrade**: Not every OB or FVG is a valid setup ❌ **Don't ignore filters**: Disabled filters increase false signals ❌ **Don't trade against cloud**: Ichimoku filter prevents low-probability trades --- ## Technical Specifications - Pine Script™ Version: 6 - Overlay: Yes - Max Boxes: 500 - Max Lines: 500 - Max Labels: 300 - Repainting: Signals confirmed on bar close (barstate.isconfirmed) --- ## Recommended Timeframes - **Scalping**: M1, M5 (reduce swing lengths to 5-7) - **Day Trading**: M15, M30, H1 (default settings) - **Swing Trading**: H4, D1 (increase swing lengths to 15-20) --- ## Performance Notes For optimal chart performance: - Disable unused features (Structure, EQH/EQL if not needed) - Reduce lookback periods on lower timeframes - Limit to 1-2 active alerts per instrument --- This indicator does not predict the future and should be used as part of a complete trading plan with proper risk management. © 2025-2026
Pine Script® indicator
by udtmngl_tv
ORBWAYORB Strategy | S&R • Key Levels • EMA Trend • Signals A high-precision Opening Range Breakout (ORB) strategy that identifies and sends clear buy & sell signals during high-momentum market sessions. It combines ORB levels, dynamic Support & Resistance, and key structure levels, all filtered by an EMA trend for stronger confirmation. Supports 5, 15, and 30-minute ORB (15 min recommended) to catch clean breakouts, avoid false moves, and trade with momentum. Built for crypto, forex, and indices, this script delivers structured, trend-aligned signals for consistent intraday trading.
Pine Script® indicator
by Faceless_22
Adaptive Trend Shield [Kaufman ER + EMA]"This script is based on the logic of ignoring signals in sideways markets" Overview The Adaptive Trend Shield is a hybrid trading indicator designed to solve the biggest problem in trend-following: being "chopped" in a sideways market. Instead of blindly following Moving Average crossovers, this script uses Kaufman’s Efficiency Ratio (ER) to diagnose the market regime. It only generates or updates signals when the market is moving "efficiently" (strong trend). When the market becomes chaotic or sideways, the indicator freezes the current signal and waits for a clear breakout. How it Works? The strategy operates on two main pillars: Market Efficiency (ER): It calculates how much the price actually moved compared to the total volatility. ER > 0.60: Strong, efficient trend. Signals are active. ER < 0.30: Market is "noisy" or sideways. Signals are frozen. Hysteresis Logic: To prevent constant switching in "Grey Zones" ($0.30$ to $0.60$), the script requires a high threshold to confirm a new trend but allows a lower threshold to maintain an existing one. Color Coding & Interpretation Blue Line: Strong Upward Trend (Efficient & Above EMA). Orange Line: Strong Downward Trend (Efficient & Below EMA). Grey Line: Inefficient Market (Sideways/Choppy). The indicator ignores new signal changes and holds the last valid position. Key Features Anti-Whipsaw: Filters out false signals during low-volatility periods. Smart Filtering: Uses a custom for loop calculation for Efficiency Ratio to ensure high accuracy and performance. On-Screen Dashboard: Real-time monitoring of Efficiency Ratio and Market Zone. How to Use? Conservative: Only take trades when the line turns Blue or Orange. Aggressive: Use the Grey zone as an early warning to tighten your Stop-Loss.
Pine Script® indicator
by iphrisco
NASDAQ NY Session Break FVG Strategy⚡ NASDAQ NY Session Break FVG Strategy — Trade Like Institutions During Peak Volatility Stop chasing random breakouts. This strategy automatically detects New York session breaks combined with Fair Value Gap (FVG) confirmation — the exact setup institutional traders use to enter high-probability NASDAQ scalps during peak volume. Built for 1-minute scalpers trading NAS100, this combines ICT Smart Money Concepts with automated risk management for precise entries during the most volatile trading hour. NOW AVAILABLE IN TWO VERSIONS: Choose between conservative single-entry precision or aggressive multi-entry scalping based on your trading style. 💡 How It Works The strategy waits for the NY opening session (9:30-9:45 EST), monitors for session high/low breaks, then confirms entries using Fair Value Gap detection: ✅ Long Setup: Price breaks above NY session high Fair Value Gap forms (bullish gap between candles) Minimum gap threshold met (0.1% default, adjustable) → BUY signal triggers with automatic TP/SL placement ✅ Short Setup: Price breaks below NY session low Fair Value Gap forms (bearish gap between candles) Minimum gap threshold met → SELL signal triggers with automatic TP/SL placement 📦 TWO VERSIONS INCLUDED — CHOOSE YOUR TRADING STYLE VERSION 1: SINGLE-ENTRY PRECISION (Conservative) ✔️ One Trade Per Session — Takes only the FIRST FVG breakout signal per NY session ✔️ Maximum Discipline — Eliminates overtrading, focuses on highest-probability setup ✔️ Lower Risk Exposure — Single position per session caps risk ✔️ Best For: Conservative traders, account preservation, strict daily limits ✔️ Strategy: Wait for session formation → First FVG breakout only → Done for the day VERSION 2: MULTI-ENTRY SCALPING (Aggressive) ✔️ Unlimited Trades Per Session — Takes EVERY valid FVG breakout during NY session ✔️ Maximum Opportunities — Capitalizes on volatile session with multiple entries ✔️ Scalper-Optimized — Designed for active traders seeking volume ✔️ Best For: Experienced scalpers, high-frequency trading, compounding gains ✔️ Strategy: Session range breaks → Multiple FVG confirmations → Stack positions or pyramid BOTH VERSIONS USE IDENTICAL ENTRY LOGIC — Only difference is trade frequency control. Switch between versions instantly based on market conditions or your daily plan. 🔥 Why Traders Choose This Strategy ✅ Session-Based Precision — Only trades the NY opening range breakout (9:30-9:45 EST), avoiding choppy mid-day markets ✅ Smart Money Confirmation — Uses FVG gaps (institutional footprints) to filter false breakouts ✅ 6 Risk Management Options — Choose from Fixed %, Trailing Stop, Break-Even, Candle-Based, Pips, or ATR methods ✅ Visual Session Boxes — Automatically plots NY session range with high/low lines ✅ Non-Repainting Logic — All signals lock on candle close, what you see is what you get ✅ Automation-Ready — Pre-built alerts for 3Commas, PineConnector, Tickerly integration ✅ Fully Customizable — Adjust FVG threshold, TP/SL ratios, session times, version selection, and visual elements ⚙️ Key Features ✔️ NY Session Auto-Detection — 9:30-9:45 EST session box with dotted range outline ✔️ Fair Value Gap Scanner — Detects bullish/bearish FVG zones with adjustable minimum gap % (0.1% default) ✔️ Session Break Logic — Only triggers when price breaks session high/low + FVG confirmation ✔️ Trade Frequency Control — Toggle between Single-Entry (conservative) or Multi-Entry (aggressive) modes ✔️ 6 TP/SL Methods: Fixed Percentage (default: 2% TP, 1% SL) Trailing Stop Loss (locks in profits as price moves) Break-Even Stop Loss (moves SL to entry after 50% profit) Candle-Based Stop Loss (swing high/low protection) Pips-Based Stop Loss (custom pip offset) ATR-Based Stop Loss (dynamic volatility adjustment) ✔️ Visual Trade Management — Entry line, TP zones (green fill), SL zones (red fill) ✔️ Risk-Reward Ratio Control — Default 2:1 RR, fully adjustable ✔️ Timezone Flexibility — UTC offset or exchange timezone options ✔️ Color-Coded Zones — FVG boxes in translucent colors, clear BUY/SELL markers 🎯 Perfect For ✅ 1-Minute NASDAQ Scalpers — Trade NAS100 during peak NY volatility ✅ ICT/Smart Money Traders — Use institutional FVG concepts for precision entries ✅ Session Traders — Focus on high-probability opening range breakouts ✅ Conservative Accounts — Version 1 limits exposure with single daily entry ✅ Aggressive Scalpers — Version 2 maximizes opportunities with unlimited entries ✅ Risk-Conscious Traders — Multiple TP/SL options for different risk tolerances ✅ Automation Users — Compatible with 3Commas, PineConnector, Tickerly via alerts 🧩 What Makes This Different This isn't another basic breakout indicator. It combines three institutional concepts: 1. Session Liquidity Zones — NY session creates predictable high/low ranges where institutions accumulate orders 2. Fair Value Gap Confirmation — Filters breakouts by requiring FVG formation (imbalance zones institutions exploit) 3. Automated Risk Management — 6 different TP/SL methods let you match strategy to your trading style PLUS: Dual Version System — Conservative traders get disciplined single-entry control. Aggressive scalpers get unlimited opportunity capture. Same proven logic, different execution styles. No AI hype, no profit promises — just clean Smart Money logic translated into automated Pine Script signals with professional-grade risk management. 🛠️ Compatibility ✅ TradingView (Free & Pro accounts) ✅ Best Markets: NASDAQ (NAS100), US30, SPX500 ✅ Optimal Timeframe: 1-minute (scalping) ✅ Works on: 5M, 15M (adjust session settings accordingly) ✅ Alert Integrations: 3Commas, PineConnector, Tickerly, TradingView native alerts ✅ Timezone Support: UTC offset or exchange-based ✅ Version Control: Easy toggle between Single-Entry and Multi-Entry modes ⚠️ Disclaimer This tool is for educational and research purposes only. Trading involves risk of loss. Always backtest thoroughly and use proper risk management. Past performance does not guarantee future results. Version 2 (Multi-Entry) can generate significantly more trades per session — ensure you understand position sizing and maximum daily loss limits before use. Start with Version 1 if new to the strategy. Get instant access to both versions and choose your trading style.
Pine Script® strategy
by AkkiCodez
XAUUSD Gold 5-Min Scalping Indicator⚡ XAUUSD 5-Min Scalping Strategy — Moving Average + Engulfing Confirmation This professionally coded TradingView strategy is built for Gold scalpers who want clean, rule-based entries without repainting. It combines a triple moving average trend filter, engulfing confirmation logic, and RSI divergence exits to create a structured, repeatable system for XAUUSD on 5-minute charts. 🔗 Source & Inspiration This system is inspired by the educational breakdown by "The Moving Average". All conceptual credit belongs to the original creator. Video reference: youtu.be This listing provides a fully enhanced and expanded version of that concept, coded into a complete TradingView indicator/strategy with TP/SL modules, alerts, divergence exits, multi-style risk management, and full Pine Script source code. This listing provides two complete TradingView scripts: ✅ Version 1 — Indicator (Signals + Alerts Only) Buy/Sell signals based on trend + engulfing confirmation No TP/SL engine Includes full alert functionality Perfect for automation with trading bots (3Commas, PineConnector, Tickerly) Ideal if you want to plug signal-only logic directly into a bot or copy-trading workflow ✅ Version 2 — Strategy (Backtest + TP/SL Engine) Full strategy framework with ready-made Take Profit & Stop Loss modules Includes break-even, trailing stops, ATR exits, RSI divergence exits Plots entry, TP, SL lines on chart Provides detailed backtesting, optimization, and forward-testing Best for refined strategy development and statistical testing 📌 Both versions are included with your purchase to give complete flexibility— signal-only automation + full TP/SL backtesting. 💡 How It Works The system uses a multi-layer confirmation approach. First, trend direction is determined using the 21/50/200 moving averages with a built-in minimum spread filter to avoid choppy markets. Then, it detects a 3-line strike pattern followed by a strong engulfing candle that covers a configurable percentage of the previous range. Only when all trend and price-action rules align does the system generate a Buy or Sell signal. Optional RSI divergence logic can be used to exit early when reversal pressure forms. 🟢 Long Setup Uptrend confirmed by MA 21 > MA 50 > MA 200 MA spread above threshold to avoid sideways noise Three consecutive bearish candles A bullish engulfing candle covering a user-defined percentage → System triggers a Buy signal on bar close 🔴 Short Setup Downtrend confirmed by MA 21 < MA 50 < MA 200 MA spread above threshold to ensure clear trend Three consecutive bullish candles A bearish engulfing candle covering a user-defined percentage → System triggers a Sell signal on bar close 🔥 Why Traders Love This Dual-Version System ✔️ Version 1 (Indicator): Clean BUY/SELL signals Zero repaint Alerts for bots & automation Plug-and-play for 3Commas, PineConnector, Tickerly, etc. ✔️ Version 2 (Strategy): Built-in TP/SL engine Trailing stop, ATR exits, break-even logic Full visual TP/SL lines on chart Perfect for real backtesting & optimization ✔️ Both Versions: Engulfing + 3-line strike pattern detection Trend filter with spread validation RSI divergence detection (optional) Non-repainting Full source code included Works on XAUUSD, Forex, Crypto, Indices, Metals This tool gives structure, clarity, and scalable automation potential to your scalping workflow. 🧩 What Makes This Different This isn’t a basic Moving Average crossover script. It blends price action (engulfing + 3-line strike) with a multi-MA trend filter, divergence detection, and a full risk-management engine. Everything is non-repainting, fully customizable, and forward-confirmed. It’s engineered for traders who prefer precision and clean logic, not flashy signals. ⚙️ Key Features ✔️ MA-Based Trend Filter with Spread Validation ✔️ Engulfing + 3-Line Strike Pattern Detection ✔️ RSI Divergence Engine (Regular + Hidden) ✔️ Multi-Mode TP/SL: Fixed, Trailing, Candle-Based, ATR, Break-Even ✔️ Full Visual Lines with TP/SL Fills on Chart ✔️ Triangle Entry Signals (BUY/SELL) ✔️ Time Range Filter for Backtesting ✔️ Alerts for automation (3Commas, PineConnector, Tickerly) ✔️ Source Code Included — No locks, no obfuscation 🎯 Perfect For ✅ Gold scalpers (5m timeframe) ✅ Trend + price action traders ✅ Traders who like engulfing continuation setups ✅ Algorithmic traders using TradingView alerts ✅ Anyone wanting a structured, rules-based approach Works on Forex, Crypto, Indices, and Commodities with minor adjustments and testing. 💼 What You Receive 📁 Version 1 — Indicator (Signals + Alerts) 📁 Version 2 — Strategy (Backtesting + TP/SL) 📁 Full Pine Script Source Code (.txt) ♾ Lifetime access + updates 🛠 Compatibility ✔ TradingView (all plans) ✔ All markets and timeframes ✔ Automation platforms: PineConnector, 3Commas, Tickerly ✔ Optimized for XAUUSD 5 minute scalping ✔ 100% non-repaint logic ⚠️ Disclaimer This tool is for educational and research purposes. Trading involves risk; always test thoroughly and use appropriate risk management.
Pine Script® indicator
by AkkiCodez
EMA Crossover Candle Color - 9/21A simple visual trend highlighter for intraday/day trading. This overlay indicator plots a fast 9-period EMA (orange) and a slower 21-period EMA (blue). Candles turn green on the exact bar where the 9 EMA crosses above the 21 EMA (bullish momentum shift), and red when the 9 EMA crosses below the 21 EMA (bearish shift). Otherwise, candles remain default. Great for spotting quick trend changes, momentum entries, or filtering chop on 5-min charts (or any timeframe). Pairs well with VWAP, volume, or price action for confluence.
Pine Script® indicator
by Cag100
3
EMA CloudEMA Cloud Description EMA Cloud is a clean, highly customizable indicator that visualizes the relationship between 8-period and 21-period moving averages as a dynamic cloud overlay. Perfect for identifying trends, momentum shifts, and potential entry/exit zones at a glance. 🔑 Key Features Dual EMA Support – Choose between EMA or SMA for both moving averages Visual Cloud Overlay – Shaded cloud between EMA 8 and EMA 21 with customizable colors: 🟢 Bullish Cloud (green) when EMA 8 > EMA 21 🔴 Bearish Cloud (red) when EMA 8 < EMA 21 Adjustable Parameters – Customize EMA lengths, line widths, and cloud transparency Toggle Display Options – Show/hide the cloud or EMA lines independently Comprehensive Alert System – Get notified on: EMA 8 crossing above/below EMA 21 Price crossing above/below EMA 8 Price crossing above/below EMA 21 📈 How to Use Trend Identification – Green cloud indicates bullish momentum; red cloud signals bearish momentum Entry Signals – Look for cloud color changes (crossovers) as potential entry points Support/Resistance – The EMA lines within the cloud can act as dynamic support/resistance levels Confirmation Tool – Combine with price action or other indicators for confluence ⚙️ Settings Setting Description EMA Type EMA or SMA EMA 8 & 21 Length Customizable period lengths Cloud Transparency Adjust opacity (0-100%) Line Width Thickness of EMA lines Colors Fully customizable bullish/bearish colors Alerts 6 configurable alert conditions 💡 Best Practices Works on all timeframes and all assets (stocks, forex, crypto, futures) Lower timeframes: Use for scalping and intraday trades Higher timeframes: Ideal for swing trading and trend following Combine with volume analysis for stronger signals
Pine Script® indicator
by pavankjadda
x5-smooth-ema[t90]Overview The x5 Smoothed EMA Flow is a trend-visualization tool designed to filter out market "noise" by applying a secondary smoothing layer to a base Exponential Moving Average (EMA). How to Use Trend Filtering: The "Flow" helps identify the true trend. When the ribbon is expanding and colored for a bullish trend, it signals strong, sustained momentum. Noise Reduction: Unlike a standard EMA which can "whipsaw" during consolidation, the double-smoothed layers stay smoother for longer, helping traders stay in a position during minor pullbacks. Trend Confirmation: Use the alignment of all smoothing layers to confirm a trend. When all layers transition to the same color, it indicates a high-probability trend shift. Dynamic Support/Resistance: The ribbon acts as a depth-based support or resistance zone. Price often reacts to the "core" of the flow before continuing its primary move. Settings Source: Choose the price source (Close, HL2, etc.) for the initial calculation. Base Length: Adjust the sensitivity. Shorter lengths are better for scalping; longer lengths are optimized for swing trading. Color Settings: Fully customizable Bull and Bear colors to match your chart theme. Disclaimer: This indicator is for educational purposes only. Moving averages are lagging indicators and should be used in conjunction with other forms of analysis. Past performance is not indicative of future results.
Pine Script® indicator
by traderninezero
MARKET REGIME INDICATOR The indicator’s main function is to apply a moving average (MA) from a different symbol. It can be used to identify the broader trend in crypto or stocks. For the selected symbol, the chart turns: Green when price is above the MA Red when price is below the MA You can choose: The type of MA The length (period) The indicator also plots the highest and lowest levels on the selected symbol to help identify potential turning points. It also includes an optional trend confirmation feature: Off On
Pine Script® indicator
by Zaimop
MTF EMA Trend Table (50/100/200)Using the MTF EMA Trend Table for Supply & Demand Trading This document explains how to use the Multi‑Timeframe EMA Trend Table as part of a supply and demand trading strategy. The indicator displays the trend direction (Bullish or Bearish) for EMA 50, 100, and 200 across the following timeframes: 5m, 15m, 30m, 1h, 4h, 1d, and 1w. --------------------------------------------- 1. What the Indicator Shows --------------------------------------------- The EMA Trend Table instantly reveals whether price is trading above or below the EMA 50/100/200 on multiple timeframes. • Price above EMA = Bullish trend • Price below EMA = Bearish trend This allows you to identify trend alignment across all key timeframes. --------------------------------------------- 2. Why EMAs Matter in Supply & Demand Trading --------------------------------------------- Supply & Demand zones show where institutions previously bought or sold aggressively. To trade these zones effectively, you must confirm higher‑timeframe trend direction. The EMA table prevents low‑probability trades by keeping you aligned with institutional flow. --------------------------------------------- 3. How to Use the Indicator for Supply & Demand Trading --------------------------------------------- Step 1 — Identify Higher‑Timeframe Bias (4H, 1D, 1W) • Bullish alignment (all green) → Trade demand zones only. • Bearish alignment (all red) → Trade supply zones only. Step 2 — Use 1H, 30M, 15M for Setup Timing These mid‑timeframes help you determine when a pullback is nearing completion. Step 3 — Trigger Entry on the 5M EMA Flip Once price enters a supply or demand zone, wait for the 5m EMA trend to flip in your direction before entering. --------------------------------------------- 4. How to Judge Zone Strength Using EMAs --------------------------------------------- Strong Demand Zone Characteristics: • Price above EMA200 on 1H+ • Zone forms above EMA200 • Pullback touches EMA50 or EMA100 Strong Supply Zone Characteristics: • Price below EMA200 on 1H+ • Zone forms below EMA200 • Pullback touches EMA50 or EMA100 --------------------------------------------- 5. Full Trade Example --------------------------------------------- Higher timeframes are bullish: 1W, 1D, 4H all green. Price pulls back into a 15m demand zone. 5m flips from Bearish → Bullish. This is the entry confirmation. --------------------------------------------- 6. Why This Indicator Improves Your Trading --------------------------------------------- • Confirms trend direction • Shows alignment across timeframes • Helps avoid counter‑trend traps • Improves zone accuracy and confidence • Enhances timing using the 5m EMA flip This combination is ideal for institutional‑style supply and demand trading.
Pine Script® indicator
by wesseljburger
Adaptive Signals ProAdaptive Signals Pro - Multi-Timeframe Signal Indicator with 50+ Configurable Filters 📊 OVERVIEW Adaptive Signals Pro is a comprehensive multi-timeframe signal indicator combining 50+ configurable filters across price action, technical indicators, volatility measures, and multi-timeframe analysis. Unlike basic signal indicators, this allows you to build your own signal logic by selectively enabling filters that match your trading strategy. 🎯 WHAT MAKES THIS ORIGINAL Dual-Strategy Range Filter: Premium/Discount zones with both Reversal (contrarian) and Momentum (trend-following) modes Adaptive RSI: Strategy selector switching between reversal and momentum modes Multi-Timeframe Consolidation: Simultaneous consolidation checks across 6 timeframes (1m-Daily) Signal Alternation System: Optional bias filter preventing consecutive signals in same direction Time-Based Limiting: Granular control over signal frequency (daily/hourly/15min/5min) Real-Time Dashboard: Live statistics showing active filters, signal counts, and performance metrics 🔧 HOW IT WORKS Core Signal Logic: Signals use an AND-based multi-condition system . All active filters must simultaneously confirm the same direction before a signal appears. Signal Generation Process: 1. Each enabled filter evaluates market conditions 2. Bullish filters check for upward momentum/alignment 3. Bearish filters check for downward momentum/alignment 4. Signal triggers ONLY when ALL active filters agree 5. Optional bias filter prevents signal repetition 6. Time-based limiters control frequency 📊 FILTER CATEGORIES 1. Basic Price Action Filters (Current TF) O1: Current open vs previous open - simple momentum check O2: Current open vs 2-candles-ago - confirms sustained movement FVG: Fair Value Gap detection - identifies price gaps between candles Consolidation: Previous body inside 2-candles-ago range - confirms breakout Engulfing 1/2: Previous close breaks prior candle ranges (2 variants) Break Confirmation: Previous close breaks 2-candles-ago high/low 2. Technical Indicators EMA Filter: Customizable period (default 10) Price must be above/below EMA for signal Multi-timeframe support: Daily, 4H, 1H, 15M, 5M, 1M Calculation: Standard exponential moving average of open prices RSI Filter with Strategy Selector: Reversal Mode: Buy when RSI ≤ Low Level (default 30) Sell when RSI ≥ High Level (default 70) Logic: Oversold/overbought conditions will reverse Momentum Mode: Buy when RSI > 50 and < High Level Sell when RSI < 50 and > Low Level Logic: Follows strength - buys in bullish territory, sells in bearish Volatility Filter (StDev): Requires minimum standard deviation threshold Filters out ranging/low-volatility periods Prevents signals during consolidation ATR Candle Size Filter: Minimum body size relative to ATR Formula: Body size ≥ (ATR × Min Body Factor) Default: 0.3 (30% of ATR) Multi-timeframe support: Daily, 4H, 1H validation 3. Premium/Discount Range Filter 📍 Calculates 12H/24H/36H range and determines if price is in premium (top 50%) or discount (bottom 50%) zone. Two Strategy Modes: Reversal/Contrarian: Buy in Discount zone (below 50%) Sell in Premium zone (above 50%) Logic: "Buy low, sell high" - mean reversion Momentum/Trend-Following: Buy in Premium zone (above 50%) Sell in Discount zone (below 50%) Logic: "Buy strength, sell weakness" - follows breakouts How Range Calculation Works: 1. Uses 1H timeframe data for consistency 2. Looks back specified hours (12/24/36) 3. Finds highest high and lowest low 4. Calculates midpoint: (High + Low) / 2 5. Premium: Above midpoint | Discount: Below midpoint Independent Features: Show Range Lines: Visual plot without affecting signals Use as Signal Filter: Activates directional filtering (works on 1m/5m/15m/1H only) 4. Multi-Timeframe Filters 🔄 Validates signals against higher timeframe alignment across 6 timeframes : Daily, 4H, 1H, 15M, 5M, 1M Available HTF Filters: O1/O2: Open comparison on higher timeframes Open Reference: Current TF must be above/below HTF open for directional bias Consolidation: HTF previous candle inside its 2-candles-ago range Prev Hi/Lo: Current price must be inside HTF previous candle range EMA: HTF open must be above/below its EMA ATR: Current TF candle size meets HTF ATR requirements Why Multi-Timeframe Validation: Ensures alignment across timeframes Higher timeframe provides context for entries Reduces false signals during HTF consolidation Eliminates counter-trend trades 🎯 SIGNAL CONTROL FEATURES Bias Filter (1 Signal per Direction): Prevents consecutive signals in same direction Forces alternation: Buy → Sell → Buy Avoids pyramiding in same direction Time-Based Limits: Daily Max Signals: Cap total per day Hourly Max Signals: Limit per hour 15-Min Max Signals: Control per 15-minute window 5-Min Max Signals: Ultra-fine control for scalpers Time Filter ⏰: 24-hour checkboxes for active trading hours Timezone offset (UTC -12 to +14) Example: Trade only London (07:00-16:00 GMT) or NY session (13:00-22:00 GMT) Timeframe Limiter: Restrict script to specific timeframes only Prevents misuse on inappropriate timeframes 📈 VISUAL DASHBOARD Real-time statistics showing: Active Filters count (max 52) Total Signals on current chart Buy/Sell Distribution with percentages Today's signal count Hourly signal count Range Status (Premium/Discount if enabled) Current Status (BUY/SELL/WAITING) Current timeframe Customization: Position: 4 corners Text Size: Tiny/Small/Normal Toggle sections: Filters/Statistics/Performance 🎨 VISUAL SIGNALS Blue Triangle (▲): Buy signal below candle Red Triangle (▼): Sell signal above candle Blue Bar Color: Buy signal active Red Bar Color: Sell signal active Purple Bar Color: Signal conflict (both conditions met) - no signal executed 🚀 HOW TO USE For Beginners: 1. Start with defaults (O1 + O2) 2. Add one filter at a time 3. Use dashboard to understand impact 4. Backtest on historical data For Advanced Traders: Scalping Setup: O1, O2, 1M/5M HTF, hourly limits Day Trading: EMA, RSI (momentum), 15M/1H alignment, Range (reversal) Swing Trading: Daily/4H consolidation, ATR filters, RSI (reversal), bias filter Trend Following: EMA multi-TF, Range (momentum), HTF Open Reference Mean Reversion: Range (reversal), RSI (reversal), consolidation, FVG RECOMMENDED CONSERVATIVE SETUP: Basic: O1, O2, Consolidation Technical: EMA (10), RSI Reversal (30/70) HTF: 1H Open Reference, 1H EMA Control: Bias Filter, Daily Max 3 Range: Reversal (12H) RECOMMENDED AGGRESSIVE SETUP: Basic: O1, FVG Technical: EMA (5) HTF: 15M O1 Control: Hourly Max 5 ⚙️ INPUT PARAMETERS UI Settings: Dashboard visibility, position, text size Timeframe: Limit to specific TFs Range Filter: Lines, filter mode, strategy, lookback Basic Filters: O1, O2, FVG, Consolidation, Engulfing, Break Technical: EMA, RSI, StDev, ATR body filter Multi-TF: O1/O2, Open Ref, Consolidation, Hi/Lo, EMA, ATR per TF Signal Control: Bias, daily/hourly/15m/5m limits Time: Timezone, 24 hourly checkboxes 📝 IMPORTANT NOTES Repainting: NO. Uses confirmed candle data with proper lookahead settings. Signal Conflicts: Purple bar = both buy/sell triggered = no signal executed (market indecision). Performance: Excessive filtering may reduce signals. Balance strictness with frequency using dashboard. Alerts: JSON format - Buy: {"value":"🟦 BUY SYMBOL"} | Sell: {"value":"🟥 SELL SYMBOL"} Recommended TFs: 1M, 5M, 15M, 1H for intraday. Range Filter works as filter only on these TFs. ⚠️ RISK DISCLAIMER This indicator is a technical analysis tool and does NOT guarantee profitable trades. All trading involves risk. Signals are based on historical patterns which may not predict future movements. Always: Use proper risk management Backtest thoroughly before live trading Combine with your own analysis Never risk more than you can afford to lose Consider fundamentals and news Past performance does not guarantee future results. This is not financial advice. 🔄 VERSION Current: v1.0 (Pine Script v6) Features: 52 filters, 6-TF analysis, dual-strategy range, adaptive RSI, dashboard, time-based limits, alerts ─────────────────────────────── This indicator provides maximum flexibility for crafting your own signal logic without coding. Start simple, add filters gradually, and backtest to find your optimal configuration. For questions: Comment below or TradingView message.
Pine Script® indicator
by agatarigan
EMA Pullback & Dual Crossover Pro Strategy,EMA Pullback & Dual Crossover Pro Strategy, (EMA 20 / 50 / 200 Trend-Based System) 🔍 Strategy Overview The EMA Pullback & Dual Crossover Pro Strategy is a trend-following and trend-reversal trading system designed to capture high-probability entries while filtering out low-quality trades during market noise. The strategy combines: Trend continuation trades using EMA 20/50 pullbacks Major trend reversal trades using EMA 20/200 crossovers A smart EMA 200 trend filter is applied only to pullback trades, ensuring trades align with the dominant market direction. This hybrid approach allows the strategy to perform well in: Strong trending markets Early trend reversals Controlled pullback environments 📐 Indicators Used Indicator Purpose EMA 20 Fast momentum & entry timing EMA 50 Pullback structure EMA 200 Long-term trend direction 🧠 Strategy Logic Breakdown 1️⃣ Trend Definition (EMA 200) The EMA 200 defines the dominant market trend: Bullish Trend → Price above EMA 200 Bearish Trend → Price below EMA 200 This trend filter is only applied to EMA 20/50 trades. 2️⃣ EMA 20 / 50 Pullback Trades (Trend Continuation) These trades capture pullbacks within an existing trend. 🔼 BUY Conditions (20/50 Pullback) EMA 20 crosses above EMA 50 Price is above EMA 200 Close confirms above EMA 20 Trade triggers after confirmation bars 🔽 SELL Conditions (20/50 Pullback) EMA 20 crosses below EMA 50 Price is below EMA 200 Close confirms below EMA 20 Trade triggers after confirmation bars 🛑 Counter-trend 20/50 trades are blocked automatically. 3️⃣ EMA 20 / 200 Crossover Trades (Trend Reversal) These trades capture major market reversals and breakouts. 🔼 BUY Conditions (20/200 Crossover) EMA 20 crosses above EMA 200 Close confirms above EMA 20 🔽 SELL Conditions (20/200 Crossover) EMA 20 crosses below EMA 200 Close confirms below EMA 20 🚀 These trades are not trend-filtered to allow early participation in new trends. ⏱ Confirmation Logic To reduce false signals: Entries are triggered only after confirmation bars Price must close in the direction of the trade Prevents wick-based and noise-induced entries ⚙️ Strategy Settings Parameter Description EMA 20 / 50 / 200 Adjustable lengths Confirmation Bars Signal validation Enable 20/50 Trades Toggle pullback trades Enable 20/200 Trades Toggle reversal trades EMA 200 Trend Filter Applies to 20/50 only 🎯 Trade Types Summary Trade Type Purpose Trend Filter EMA 20/50 Trend continuation (pullback) ✅ Yes EMA 20/200 Trend reversal / breakout ❌ No 📊 Best Use Cases Markets: XAUUSD, Indices, Major Forex Pairs Timeframes: M5, M15, H1 Market Conditions: Trending & breakout environments ⚠️ Risk Disclaimer This strategy is designed for systematic trading and should be used with: Proper risk management Fixed position sizing Stop-loss rules defined by the trader Backtesting and forward testing are strongly recommended before live deployment. 🧩 Final Notes This strategy is structured like a professional institutional system: One engine captures trend pullbacks One engine captures trend shifts Noise is filtered using EMA structure and confirmations It is not a scalping bot, but a trend-aligned trading framework suitable for disciplined traders.
Pine Script® strategy
by Nielesh
ORB Strategy SnR Key Levels EMA Trend SignalsORB Strategy | S&R • Key Levels • EMA Trend • Signals A high-precision Opening Range Breakout (ORB) strategy that identifies and sends clear buy & sell signals during high-momentum market sessions. It combines ORB levels, dynamic Support & Resistance, and key structure levels, all filtered by an EMA trend for stronger confirmation. Supports 5, 15, and 30-minute ORB (15 min recommended) to catch clean breakouts, avoid false moves, and trade with momentum. Built for crypto, forex, and indices, this script delivers structured, trend-aligned signals for consistent intraday trading.
Pine Script® indicator
by Faceless_22
Fibonacci EMA/SMA SystemFibonacci EMA/SMA System Overview A clean, customizable moving average indicator built around Fibonacci-based EMA and SMA stacks. Designed for trend identification across multiple timeframes using mathematically harmonious period lengths. Enable one or more stacks based on your trading timeframe. Use Fast + Core for intraday/swing. Add Macro for higher timeframe context. Stacks Fast (8/13/21) — Momentum, short-term trend Core (21/34/55) — Pullbacks, swing trading Full Trend (13/21/34/55/89) — Trend strength, compression/expansion Macro (55/89/144) — Position trading, regime context Standard (20/50/100/200) — Traditional reference levels Options MA Type — EMA or SMA Price Source — Close, HL2, HLC3, OHLC4, etc. Uniform Color — Apply single color to all active lines Individual Colors — Set unique color per line in each stack Line Style — Solid or Dotted Line Width — 1–4 pixels Fill — Shaded area between outer EMAs Labels — Period numbers displayed at line ends
Pine Script® indicator
by RobertDun
Daily 5 & 20 (Session Lines)Daily 5 & 20 Moving Average Levels This indicator plots the Daily 5-period and Daily 20-period moving averages as horizontal levels on any timeframe. Each level starts at the first bar of the trading day and extends only to the current price, keeping the chart clean and focused on the active session. The levels update once per day using confirmed daily data and are designed to act as intraday bias, support, and resistance references. Labels are aligned on the right side for a minimal, institutional-style presentation. Useful for: Intraday trading on lower timeframes Identifying daily trend bias Mean reversion and pullback setups Futures, stocks, ETFs, and options No future extension, no repainting, and no unnecessary clutter. -Golden Zone Family
Pine Script® indicator
by saucyboyrecords