MADZ - Moving Average Deviation Z-ScoreMADZ - Moving Average Deviation Z-Score
MADZ is a powerful valuation oscillator that measures how far the current price has deviated from a user-selected moving average, expressed in statistical terms as a Z-Score. This normalization makes it easier to identify overvalued and undervalued conditions across different assets, timeframes, and market environments.
Overview
The indicator works by:
Calculating the percentage deviation of price from a customizable moving average (SMA, EMA, WMA, VWMA, HMA, or RMA).
Applying a Z-Score transformation to this deviation over a chosen lookback period — showing how many standard deviations the current deviation is from its historical average. Smoothing the result for a clean, responsive oscillator centered around zero.
Positive values indicate price is trading above the moving average (potentially overvalued), while negative values suggest price is below (potentially undervalued). The further from zero, the greater the relative valuation extreme.
Key Features
Customizable base moving average (type and length)
Z-Score normalization for statistically meaningful readings
Final smoothing for reduced noise
Static overbought/oversold levels (default ±1.5) — line changes color when crossed (red above, green below)
Dynamic extreme bands (±3σ) — optional display of bands calculated from the oscillator’s own volatility over a user-defined period
Extreme zone highlighting — background shading activates only during truly rare valuation events
Extreme Zone Highlighting Explained
The highlighted extreme zones (background shading) are not based on the fixed static levels. Instead, they signal statistically significant outliers using dynamic bands:
Overbought extreme zone (red background): Triggered when MADZ rises above the upper dynamic band (+3 standard deviations of the MADZ line itself over the dynamic length period).
Oversold extreme zone (green background): Triggered when MADZ falls below the lower dynamic band (-3 standard deviations).
These ±3σ bands adapt to the recent behavior of the oscillator. Because they represent three standard deviations from the mean of MADZ, crossings are rare and often precede major reversals or trend accelerations — making them valuable for spotting potential turning points in valuation extremes.
How to Use
Use zero-line crosses for trend changes or mean-reversion setups.
Watch static level crossings (±1.5 default) for early overbought/oversold warnings.
Pay special attention to extreme zone shading — these highlight high-conviction valuation dislocations that may offer superior risk/reward opportunities.
Designed on the BTC chart, but can be used on other assets.
Settings
Moving Average Settings: Type, length, source
Z-Score & Smoothing: Lookback period and smoothing length
Threshold Levels: Static overbought/oversold thresholds
Display Options: Toggle dynamic bands and extreme background highlighting
This is an educational tool designed to aid in valuation analysis. The information provided is not financial advice. Always conduct your own research and consider multiple factors before making trading decisions. Trade at your own risk.
Moving Averages
SB - HULL MANifty Options Scalping @ 1 Minute TF
Call Entry - If both MA turns bullish.
Put Entry - If Both MAs turns bearish.
Best results - If both MAs complement each other in the same direction.
Exit Plan - My opinion, If slow MA turns bearish. However one can also plan to exit if any one of the MA turns bearish.
Display - Make your own setting as per your own comfort
Keep this indicator in a separate pane below the chart. It will give clarity view of the chart.
Works well on nifty derivatives @ 1 minute TF , can do well on other instruments too.
SB - HULL MANifty Derivatives Scalping @ 1 Minute TF
Call Side - If both the MAs turns bullish
Put Side - If both the MAs turns bearish.
Can be applied on options charts directly. Better to plan 50 points in the money Call or Put option from Spot.
Exit - My opinion, if slow MA turns bearish. You can either exit if anyone of the MA turns bearish also.
Best for nifty derivatives scalping at 1 Minute TF, can work well on other instruments too.
Display Setting - As per your own convenience, Mine snap is below :
Area per IntervalDescription
This indicator shades the area between 2 curves, an SMA and the nearest open/close to the SMA, and their intersections. The black labels with leader lines describe the calculated area of each shaded section, and the total area accumulated per total number of time intervals for that area. The additional value visible in the status line that is not displayed on the chart is, at any bar index (time interval), the current total area of the incomplete shaded area.
Usage
- The default color of the shaded areas denote the type of momentum being built before the cross. Green for bullish, red for bearish.
- The area value of the shaded areas can be used as a capacity indicator, denoting imbalances between the previous and next crosses.
- The area per interval value of the shaded areas can be used as a momentum indicator, denoting which area is carrying more price movement before the price crosses.
- Similar to indicators that use dynamic price differences between OHLC data, moving averages, etc, confluence with other momentum indicators that use different elements creates additional confirmation.
Conclusion
Simple momentum indicator. Comment for possible updates that can be made.
SB - VWDEMA - V2Derivatives - Scalping @ 1 Minute TF
Rules : -
CE entry - If ATR a& Dema both turns Green.
PE entry - If ATR and Dema both turns Red.
If both are in opposite colour code, wait till both align in direction and colour coding.
Vwap - If price is above Vwap, Calls will be rewarded well ( Try to find out entry in call options ).
If Price is below VWAP, Puts will be rewarded well also, try to figure out entry in Put options.
Best results - Nifty derivative @ 1 minute TF , However can work well in all other instruments.
Display - make your own settings as per your convenience. Mine is attached below for your reference :
SB - VWDEMAScalping @ 1 Minute time frame.
Rules : -
1. Call entry - If Dema and ATR both turns green ( 1 minute TF )
2. Put Entry - If Dema and ATR both turns red ( 1minute TF )
If one is red and other is green wait till both align in same direction.
Vwap - Price above VWAP, call side entry will be rewarded well ( Try to find entry in calls) and if price is below Vwap Put side entry will be rewarded well ( Try to find entry in Puts).
Exit - Follow ATR stop loss line at 1 minute TF ( candle closing basis ).
Can be used on option charts directly.
Best results - Nifty derivatives @ 1 Minute TF, however it can work well with other instruments too.
Make your display setting as per your convenience.
777 SigmaDev Clustersyeeeeeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaaaaaaaaaaaaaah buddyyyyyyyyyyyyyyyyyyyyyyyyyyyy!
777 expected Movehell yeaaaaaaaaaaaah, we back at it again yfm, some bs right here, will NOT tap ever!!!!!!
Algonova TrendFlowWhat was previously a (very!) manual process of looking at "UPs" and "DOWNs" to determine which way the market is "flowing" has now been automated! Urban TrendFlow is an immense timesaver for our users as we search for opportunities to go long and short (and especially when we need to sit on our hands and let uncertain markets "find their flow".
ICT Clean CISD & Mitigated MTF FVGs Clean CISD & MTF FVGs
Minimalist Institutional Order Flow Tool
Key Features:
CISD (Change in State of Delivery): Marks the first sign of an order flow shift. Displayed as a clean black line + label (no bulky boxes).
High-Probability FVGs: Scans 15m, 1h, and 4h timeframes for gaps.
Displacement Filter: Only shows "Crucial" gaps. Tiny, insignificant imbalances are automatically filtered out using an ATR threshold.
Auto-Cleaning Logic: Boxes are automatically deleted once price fills or closes through them, keeping your chart 100% clean.
Tabla de EMA's y TimeframesGraphic and permanent representation of the trend of an action/CFD/stock/crypto, directly related to the technical analysis of its EMA's.
Nested SMA WaveThe "Nested SMA Wave" is a custom Pine Script (v5) indicator for TradingView that overlays a series of 8 Simple Moving Averages (SMAs) on the price chart. These SMAs use exponentially increasing lengths based on powers of 2, starting from a user-defined base length (default: 25). This creates lengths like 25, 50, 100, 200, 400, 800, 1600, and 3200.
Each SMA is plotted in a distinct color, forming a "wave" of nested lines that fan out from short-term (faster, more responsive) to long-term (slower, smoother). Semi-transparent colored fills (shaded zones) are added between consecutive SMAs, with customizable toggles and transparency levels, creating layered visual bands that highlight the spaces between different trend timescales.
Use Cases
Multi-Timeframe Trend Visualization: The power-of-2 nesting approximates higher timeframe trends on lower timeframes without switching charts. Shorter SMAs react quickly to price changes, while longer ones show major trends, helping identify overall market structure at a glance.
Support/Resistance Identification: Price interacting with the SMA lines or shaded zones can act as dynamic support/resistance. Crossovers between nested SMAs signal potential momentum shifts.
Trend Strength and Alignment: When SMAs are widely spaced and aligned (e.g., all sloping up), it indicates strong trends. Converging or crossing SMAs suggest consolidation or reversals. The shaded zones add depth, making expansions/contractions in volatility or trend power visually obvious.
Ribbon-Style Trading: Similar to moving average ribbons, traders can look for price pulling back to inner zones for entries in the direction of the broader "wave," or use zone breaks for signals.
Customization for Different Assets/Timeframes: Adjust the base length (e.g., smaller for crypto volatility, larger for stocks) and toggle shades to reduce clutter.
This creates a visually rich, rainbow-like overlay that's particularly useful for trend-following strategies on any chart.
MAs + Bollinger Bands by @ETERNYWORLDMAs + Bollinger Bands by @ETERNYWORLD is the core trend and volatility layer inside the Trend Mastery Pro ecosystem, engineered by EternityWorld to deliver a clean, structured, and highly customizable market bias reading directly on the chart.
What’s Inside the Indicator
5 independent Moving Averages (EMA or SMA) with individual enable/disable toggles, lengths, colors, and widths.
Bollinger Bands with professional basis options: SMA, EMA, RMA/SMMA, WMA, VWMA, plus adjustable deviation multiplier and visual band fill.
Chart overlay compatibility, making trend and volatility easy to interpret for fast decisions.
Fully configurable alerts, enabling traders to stay proactive without missing high-probability expansion triggers.
Enhanced by Trend Mastery Pro Workflow
This indicator complements the 3-step methodology of Trend Mastery Pro:
Bias → defines the dominant trend direction.
Trigger → identifies breakout or momentum expansion zones using confluence with volatility.
Management → supports consistent risk execution when combined with external strategy rules and trade plans.
Key Strengths
✔ Unified trend + volatility envelope on chart
✔ Individual component control (no clutter, no guesswork)
✔ Noise reduction in consolidation environments
✔ Adaptable to crypto, forex, indices, commodities, and equities
✔ Reliable for intraday impulse plays and structured directional setups
How to Use It
Context: Align your analysis with the broader bias before execution.
Signal: Watch for volatility expansion and trend alignment for breakout scenarios.
Execution: Apply your risk plan (position size, partials, BE/trailing) based on your trading model.
Best Practices
🛡️ Tune sensitivity according to asset volatility and timeframe horizon
🛡️ Avoid trading against dominant bias during compression phases
🛡️ Always validate through backtesting and forward testing before scaling
🛡️ Log performance and refine parameters iteratively
Who It's For
Traders who want:
A repeatable and disciplined process
A professional visual structure
Less noise, more clarity, better bias alignment
A premium indicator suite that supports real decision-making
Compatibility
Seamlessly works with any asset and timeframe on TradingView supporting chart overlay indicators. Alerts are designed to help monitoring without being glued to the screen.
Disclaimer ⚠️
This product is not financial advice and does not guarantee results. Performance varies depending on market conditions, asset behavior, user configuration, and applied risk management. Always trade responsibly and follow your own risk plan.
Velocity Divergence Radar [JOAT]
Velocity Divergence Radar - Momentum Physics Edition
Overview
Velocity Divergence Radar is an open-source oscillator indicator that applies physics concepts to market analysis. It calculates price velocity (rate of change), acceleration (rate of velocity change), and jerk (rate of acceleration change) to provide a multi-dimensional view of momentum. The indicator also includes divergence detection and force vector analysis.
What This Indicator Does
The indicator calculates and displays:
Velocity - Rate of price change over a configurable period, smoothed with EMA
Acceleration - Rate of velocity change, showing momentum shifts
Jerk (3rd Derivative) - Rate of acceleration change, indicating momentum stability
Force Vectors - Volume-weighted acceleration representing market force
Kinetic Energy - Calculated as 0.5 * mass (volume ratio) * velocity squared
Momentum Conservation - Tracks momentum relative to historical average
Divergence Detection - Identifies when price and velocity diverge at pivots
How It Works
Velocity is calculated as smoothed rate of change:
calculateVelocity(series float price, simple int period) =>
float roc = ta.roc(price, period)
float velocity = ta.ema(roc, period / 2)
velocity
Acceleration is the change in velocity:
calculateAcceleration(series float velocity, simple int period) =>
float accel = ta.change(velocity, period)
float smoothAccel = ta.ema(accel, period / 2)
smoothAccel
Jerk is the change in acceleration:
calculateJerk(series float acceleration, simple int period) =>
float jerk = ta.change(acceleration, period)
float smoothJerk = ta.ema(jerk, period / 2)
smoothJerk
Force is calculated using F = m * a (mass approximated by volume ratio):
calculateForceVector(series float mass, series float acceleration) =>
float force = mass * acceleration
float forceDirection = math.sign(force)
float forceMagnitude = math.abs(force)
Signal Generation
Signals are generated based on velocity behavior:
Bullish Divergence: Price makes lower low while velocity makes higher low
Bearish Divergence: Price makes higher high while velocity makes lower high
Velocity Cross: Velocity crosses above/below zero line
Extreme Velocity: Velocity exceeds 1.5x the upper/lower zone threshold
Jerk Extreme: Jerk exceeds 2x standard deviation
Force Extreme: Force magnitude exceeds 2x average
Dashboard Panel (Top-Right)
Velocity - Current velocity value
Acceleration - Current acceleration value
Momentum Strength - Combined velocity and acceleration strength
Radar Score - Composite score based on velocity and acceleration
Direction - STRONG UP/SLOWING UP/STRONG DOWN/SLOWING DOWN/FLAT
Jerk - Current jerk value
Force Vector - Current force magnitude
Kinetic Energy - Current kinetic energy value
Physics Score - Overall physics-based momentum score
Signal - Current actionable status
Visual Elements
Velocity Line - Main oscillator line with color based on direction
Velocity EMA - Smoothed velocity for trend reference
Acceleration Histogram - Bar chart showing acceleration direction
Jerk Area - Filled area showing jerk magnitude
Vector Magnitude - Line showing combined vector strength
Radar Scan - Oscillating pattern for visual effect
Zone Lines - Upper and lower threshold lines
Divergence Labels - BULL DIV / BEAR DIV markers
Extreme Markers - Triangles at velocity extremes
Input Parameters
Velocity Period (default: 14) - Period for velocity calculation
Acceleration Period (default: 7) - Period for acceleration calculation
Divergence Lookback (default: 10) - Bars to scan for divergence
Radar Sensitivity (default: 1.0) - Zone threshold multiplier
Jerk Analysis (default: true) - Enable 3rd derivative calculation
Force Vectors (default: true) - Enable force analysis
Kinetic Energy (default: true) - Enable energy calculation
Momentum Conservation (default: true) - Enable momentum tracking
Suggested Use Cases
Identify momentum direction using velocity sign and magnitude
Watch for divergences as potential reversal warnings
Use acceleration to detect momentum shifts before price confirms
Monitor jerk for momentum stability assessment
Combine force and kinetic energy for conviction analysis
Timeframe Recommendations
Works on all timeframes. Higher timeframes provide smoother readings; lower timeframes show more granular momentum changes.
Limitations
Physics analogies are conceptual and not literal market physics
Divergence detection uses pivot-based lookback and may lag
Force calculation uses volume ratio as mass proxy
Kinetic energy is a derived metric, not actual energy
Open-Source and Disclaimer
This script is published as open-source under the Mozilla Public License 2.0 for educational purposes. It does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management.
- Made with passion by officialjackofalltrades
EMA 9 vs VWMA 30 Portillo Valentin “It uses a 9‑period moving average and a volume‑weighted moving average. It gives a crossover signal, and the parameters can be adjusted.”
SessionVWAP + ORBThis TradingView Pine Script indicator combines two powerful intraday tools:
Multiple Rolling VWAPs: It plots up to four independent rolling (continuous) Volume Weighted Average Prices (VWAPs) with user-defined periods (e.g., 1-hour, 2-hour, 4-hour, daily). These are "anchored" to a customizable session start time and roll forward accurately without daily resets, providing dynamic fair-value benchmarks that react at different speeds (fastest/shortest on top).
Opening Range Breakout (ORB) Zones: It displays the high/low range (with optional background shading and lines) for major global trading sessions — Sydney, Tokyo, London, New York, and US RTH (Regular Trading Hours, starting at 9:30 ET) — over the first configurable minutes (default 30) after each session open, with history for several prior days.
The latest version adds full timezone flexibility (e.g., Chicago, New York, UTC, London, Tokyo, Sydney), automatically adjusting anchor times and session opens.
Use Case
This script is ideal for intraday and day traders (especially in stocks, futures, forex, or indices) seeking confluence between volume-based value areas and session momentum.
VWAP Component: Use the layered rolling VWAPs as dynamic support/resistance. Price above the fastest VWAPs suggests bullish bias; pullbacks to slower VWAPs offer mean-reversion entries. The multi-timeframe view helps gauge short-term vs. longer-term "fair value."
ORB Component: Trade breakouts from major session opening ranges — e.g., buy above the New York ORB high (red line) for momentum longs, or fade failures for reversals. Combine with VWAP (e.g., only take NY ORB longs if price is above session VWAP) for higher-probability filters.
Overall: Overlay on lower timeframes (1-15 min) to spot setups like ORB breakouts aligning with VWAP crosses, or use for risk management (stops beyond ORB extremes). The timezone support makes it versatile for global markets without manual adjustments.
Price % Distance from 52 Weeks High, and EMAs"Stop guessing how far extended the price is—measure it instantly."
As a swing trader, knowing the exact distance between the current price and your key moving averages is critical. It tells you if a stock is overextended (too far) or offering a low-risk pullback entry (near 0%).
This lightweight utility script calculates the real-time percentage distance of the closing price from three critical levels:
10 EMA (Short-term momentum)
20 EMA (Swing trend baseline)
52-Week High (Major structural resistance)
It displays this data in a single, clean Smart Label attached to the latest candle, keeping your chart clutter-free.
Key Features
📊 Instant Calculation: See exactly how far (%) the price is from the 10 EMA, 20 EMA, and 52-Week High without using a measuring tool.
🧠 Intelligent Trend Coloring: The text color changes dynamically based on the immediate trend:
🟢 Green Text: Price is ABOVE both 10 & 20 EMAs (Bullish / Buy-the-dip zone).
🔴 Red Text: Price is BELOW both 10 & 20 EMAs (Bearish / Caution).
⚪ White Text: Price is mixed/choppy (between the EMAs).
👁️ High Contrast Design: Uses a semi-transparent dark background that ensures the data is clearly visible on both Light and Dark mode charts.
How to Use for Swing Trading
Pullback Entries: In a strong uptrend (Green Text), watch for the 10 EMA or 20 EMA % value to drop near 0.0% to 0.5%. This indicates a pullback to the average—often a high-probability entry point.
Overextension Warning: If the % distance becomes unusually large (e.g., Price is +5% above the 10 EMA), the move may be overextended, signaling to tighten stops or take profit.
52-Week Breakouts: Monitor the 52W % distance. As it approaches 0.0%, the stock is challenging its yearly high, alerting you to potential breakout plays.
Settings
EMA Lengths: Fully customizable (Default: 10 & 20).
Lookback: Adjust the high lookback period (Default: 260 bars for 52 Weeks).
Position: Toggle the label to appear Above or Below the candle.
THE ELVINATORTHE ELVINATOR is my trend-following momentum indicator built on the 20 EMA, 50 EMA, and 200 EMA, designed for trading **XAUUSD during the New York session (9:30–17:00 NY time), Monday through Friday**.
**How to trade it:**
* **Trend filter:** Only take **longs above the 200 EMA** and **shorts below the 200 EMA**. This keeps trades aligned with Gold’s dominant direction.
* **Long setups:** A **20 EMA cross above the 50 EMA** signals bullish momentum. Best entries come after a pullback into the 20–50 EMA zone followed by strong continuation candles.
* **Short setups:** A **20 EMA cross below the 50 EMA** signals bearish momentum. Look for pullbacks into the EMA zone and rejection before continuation lower.
* **Timing:** Focus on NY open and high-volume moves. Avoid choppy conditions and late-session exhaustion.
* **Risk & exits:** Place stops beyond recent swings or EMA structure. Targets can be prior highs/lows or scaled with trend continuation.
THE ELVINATOR is built for **structure, patience, and disciplined execution**, allowing traders to capitalize on Gold’s volatility without chasing noise.
Simple ema and sma cross
A simple EMA and SMA cross is an indicator that uses alpha from two moving averages: SMA (simple moving average) and EMA (exponential moving average).
The point where the EMA and SMA cross is usually a good place to enter a position.
The indicator includes smoothing settings to help you find the right calibration for your trading needs.
It also marks signals with triangles for easier use and includes alerts so you never miss a cross.
ATR Bands (MA Distance)ATR Bands (MA Distance) plots volatility-based bands at a multiple of ATR away from a selected moving average.
Unlike percentage envelopes or standard deviation bands, this indicator measures distance from the moving average using ATR, representing the market’s normal “breathing range” rather than statistical probability.
Key Features
The center line is a selectable moving average (EMA, SMA, RMA/Wilder, or WMA).
Upper and lower bands are calculated as:
Moving Average ± ATR × Multiplier
Band width automatically adapts to changing market volatility.
Designed for consistent use across different markets and timeframes without parameter re-optimization.
Non-repainting: all values are calculated only from confirmed historical bars.
Intended Use
ATR Bands (MA Distance) is best used as a context and preparation tool , not as a direct entry or exit signal.
Typical use cases include:
Identifying areas where price is extended relative to its recent volatility.
Visualizing normal vs. stretched price distance from the moving average.
Supporting range-based analysis or trade preparation when combined with other indicators (e.g., oscillators).
Important Notes / How NOT to Use
This indicator does NOT generate buy or sell signals by itself .
Touching or crossing a band does not imply an automatic reversal.
In strong trending markets, price may stay outside the bands for extended periods.
ATR Bands should not be interpreted as overbought/oversold levels on their own.
This indicator does NOT repaint. Once a bar is closed, its values will not change.
For best results:
Use ATR Bands as a preparation zone, then wait for confirmation from your own entry logic.
Disable or ignore band-based mean-reversion ideas during strong trend conditions.
Concept Summary (Short)
ATR Bands (MA Distance) visualize how far price has moved from its moving average in terms of volatility, without repainting and without relying on percentage deviation or statistical assumptions.
Optional Short Description (Preview)
Volatility-based, non-repainting ATR bands plotted at a distance from a moving average.
Designed for market context and trade preparation — not standalone signals.
MTF EMAs: 200 EMA (1hr & 15m), 8 EMA (5m)Using the 200 ema on 1hr and 15 min timeframe to ID entry points for scalping.
Moving Average Structure ZigZag [Stable & Filtered]
(日本語説明)
このインジケーターは、移動平均線（MA）の転換に基づき、相場の「真の構造」を可視化するために開発されました。 通常のZigZagのように価格の単純な反転に依存せず、「MAのトレンド転換 ＋ 指定した値幅の到達」という2つの条件を用いることで、レンジ相場の細かなノイズ（ダマシ）を排除し、ダウ理論に基づいた重要な高値・安値だけを結びます。
💡 主な機能
MAタイプの切り替え: SMA, EMA, HMA, VW-HMAなど、目的に合わせたトレンド感度を選択可能。
値幅フィルター（Min Deviation）: 添付画像のように、小さな値動きをカットし、大きな市場構造だけを抽出します。
価格アクションへの追従: ラインはMAの数値ではなく、期間内の実最高値・最安値を正確に結び、高値更新時には自動で延伸されます。
🛠 活用シーン
環境認識: 上位足での大きな波形を確認し、現在のフェーズを定義。
ノイズ除去: 市場の主要な節目（レジサポ候補）の特定。
ダウ理論の視覚化: 高値・安値の切り上がり・切り下がりを明確化。
(English Description)
This indicator was developed to visualize the "True Market Structure" based on Moving Average (MA) reversals. Unlike standard ZigZag which relies solely on price reversals, this tool combines MA Trend Reversals and a Minimum Deviation filter to eliminate market noise and highlight significant swing highs and lows based on Dow Theory.
💡 Key Features
Multiple MA Types: Select from SMA, EMA, HMA, VW-HMA, etc., to match your preferred trend sensitivity.
Min Deviation Filter: As shown in the attached image, it filters out minor price fluctuations to extract only the major market waves.
Price Action Tracking: The lines connect the actual High/Low prices within the period, not the MA values themselves. Lines automatically extend when a trend continues to new highs/lows.
🛠 Use Cases
Market Context: Identify major wave patterns on higher timeframes to define the current phase.
Noise Reduction: Pinpoint key market levels and potential support/resistance.
Dow Theory Visualization: Clearly visualize higher highs/lows and trend shifts.
Settings
MA Type: Choose the type of Moving Average.
Moving Average Length: The lookback period for structure.
Min Deviation (Pips): The threshold to filter noise. Adjust according to the volatility of the pair.
