Get started

Oscillators

All-in-One Momentum Composite The Four Components (and Why They're Chosen) RSI (Relative Strength Index) – Classic overbought/oversold oscillator (14-period default). Measures speed and change of price movements. Stochastic (%D line) – Smoothened momentum indicator that compares closing price to the price range over a period. Excellent at spotting reversals in ranging markets. WaveTrend – Very popular in crypto and forex communities (originally by LazyBear). It’s essentially a momentum oscillator based on overbought/oversold channels, similar to a faster, smoother RSI/Stochastic hybrid. Known for early divergence signals and clean crossovers. MACD Histogram – Captures momentum changes and trend strength via the difference between fast and slow EMAs. The histogram shows acceleration/deceleration.
Pine Script® indicator
by Thecantillonreport
FMT_TRENDFOLLOWiNGThis indicator is developed based on the Average Directional Index (ADX) , which is used to measure the strength of a trend, regardless of price direction. It has been custom-modified and optimized specifically for the FCPO market, with the following usage structure: • 30-Minute Timeframe (HTF) Used to identify the major market movement. When the ADX value is above 25, it indicates that the market is entering a strong trending phase. • 5-Minute Timeframe (LTF) Acts as a confirmation for trend change or continuation, indicated by color changes (Green/Red) and the appearance of a Reconnect Dot when momentum becomes active again. • 1-Minute Timeframe Used for Buy or Sell entries at the nearest trading zones, aligned with the trend direction and strength from higher timeframes. This indicator is suitable for Day Trading and Momentum Trading strategies, especially for FCPO traders who focus on market structure and momentum confirmation. ⚠️ DISCLAIMER: This indicator is provided for educational and technical analysis purposes only and does not constitute financial advice or a trading recommendation. All signals are derived from technical calculations and may produce false signals depending on market conditions. Users are fully responsible for their trading decisions, including risk management and position sizing. Past performance does not guarantee future results, and users are encouraged to conduct paper trading or backtesting before using it in live trading.
Pine Script® indicator
by Famyhamdan
JK Scalp - Nishith RajwarJK Scalp Nishith Rajwar Multi-Stochastic Rotation & Momentum Scalping Framework JK Scalp is a rule-based momentum and rotation oscillator designed for short-term scalping and intraday execution. It focuses on how momentum rotates across multiple stochastic speeds, instead of relying on a single oscillator or lagging averages. This is an execution aid, not a predictive indicator. 🧠 Concept & Originality Unlike standard stochastic tools, JK Scalp uses four synchronized stochastic layers: • Fast (9,3) → execution timing • Medium (14,3) → structure confirmation • Slow (44,3) → swing context • Trend (60,10,10) → dominant momentum regime The core idea is quad-rotation: High-probability trades occur when all momentum layers rotate together after reaching an extreme. This script combines: • Momentum rotation • Divergence logic • Flag continuation logic • Trend-state filtering into a single cohesive framework, not a simple indicator mashup. 📊 How to Use (Step-by-Step) 1️⃣ Best Timeframes • Scalping: 1m – 3m • Intraday: 5m – 15m • Avoid higher timeframes (not designed for swing holding) Works best on: • Index options • Index futures • Highly liquid stocks • Crypto majors 2️⃣ Understanding the Signals 🔁 Quad Rotation (Core Signal) A valid rotation requires: • Fast, Medium, Slow, and Trend stochastic moving in the same direction • Momentum exiting Overbought / Oversold zones • Trend stochastic supporting the move This filters out random oscillator noise. 3️⃣ Entry Conditions 🟢 LONG Setup • Bullish quad rotation • Either: – Bullish divergence OR – Bullish flag pullback • Fast stochastic turning up 🔴 SHORT Setup • Bearish quad rotation • Either: – Bearish divergence OR – Bearish flag pullback • Fast stochastic turning down ⚠️ Signals are confirmation-based, not anticipatory. 4️⃣ SUPER LONG / SUPER SHORT These appear only when: • Quad rotation • Divergence confirmation They represent high-confidence momentum inflection zones, not guaranteed reversals. 5️⃣ Stop-Loss Visualization Optional SL zones are plotted using: • Recent swing high / low • ATR-based buffer (configurable) This helps traders visualize risk, not automate exits. 🎨 Visual System (Why It Looks Different) • Multi-layer glow effects → momentum strength • Dynamic cloud → fast vs trend dominance • Color-shifting fast line → acceleration vs decay • Chart overlays → execution clarity without clutter Everything is designed for speed and readability during live trading. ⭐ Unique Selling Points (USP) ✅ Multi-speed stochastic rotation (not single-line signals) ✅ Context-first, not signal spam ✅ Built-in divergence + continuation logic ✅ Non-repainting logic ✅ Designed for scalpers, not hindsight analysis ✅ Works across indices, options, crypto, and futures ⚠️ Important Notes • Not a standalone trading system • Best combined with: – Market structure – Key levels – Session timing • Avoid low-liquidity or news-spike candles This indicator guides execution, it does not replace discretion. 👤 Who This Is For • Scalpers & intraday traders • Options traders needing precise timing • Traders who understand momentum & structure • Users who want fewer but higher-quality signals 🏁 Summary JK Scalp helps you trade momentum rotation, not overbought/oversold myths. Wait for alignment. Execute with discipline.
Pine Script® indicator
by nishith85441
1
0DTE Credit Spreads Indicator0DTE Credit Spreads Indicator This indicator is designed to assist 0DTE credit spread traders by providing rule-based PCS (Put Credit Spread) and CCS (Call Credit Spread) signals, dynamic risk levels, and an integrated performance summary — all within a single, cohesive tool. What the indicator does The script implements a complete intraday framework tailored specifically to same-day expiration credit spreads, combining market structure, volatility context, and trade management logic into one workflow: Opening Range logic (15-minute) A defined opening range is used to establish directional bias. Signals are generated only after the range is confirmed, aligning entries with controlled intraday structure rather than momentum chasing. Optional Early Entry logic An optional early-entry mechanism evaluates 30-minute RSI extremes during the opening phase only. This is intentionally constrained to the opening window and designed for early premium capture scenarios common in 0DTE trading. Volatility-aware credit estimation Expected credit is derived from current volatility conditions to provide realistic assumptions for backtesting, trade visualization, and partial-profit modeling. Dynamic risk visualization Each signal automatically plots: A horizontal stop-loss level A take-profit level based on user-selected credit percentage A dynamic diagonal stop line from entry to end-of-day, modeling time-based risk specific to 0DTE positions Partial profit and contract modeling The backtest logic supports closing a user-defined number of contracts at the take-profit level, while allowing remaining contracts to run to end-of-day or stop loss. This mirrors real-world 0DTE trade management practices. Flexible evaluation modes Trades can be evaluated using either: Intraday stop-loss crosses, or End-of-day outcome logic allowing users to align results with their execution style. Backtesting and transparency The indicator includes a live, on-chart backtest table displaying: PCS and CCS signal counts Wins, losses, and win rate Total P/L (points or dollar-based per contract) Contract and partial-TP configuration A non-blocking “Recommended context” note indicating whether the script is running on the preferred symbol and timeframe Signals and visuals will display on any chart. The recommended context is informational only and does not restrict usage. Chart presentation Full visual mode with labels, TP/SL levels, and diagonal risk lines Clean Chart mode with arrow-only signals and a compact summary table Automatic object management to prevent chart clutter. Intended use This indicator is intended as a decision-support and research tool for experienced traders. It does not place trades, does not guarantee profitability, and should be used alongside proper risk management.
Pine Script® indicator
by T_I_M_E
1
Kinetic Scalper [BULLBYTE]KINETIC SCALPER - ADVANCED MOMENTUM & CONFLUENCE TRADING SYSTEM A SOPHISTICATED MULTI-FACTOR ANALYSIS INDICATOR FOR PRECISION ENTRIES The Kinetic Scalper is a comprehensive trading analysis tool that combines volume-weighted momentum calculations, multi-oscillator divergence detection, and a proprietary 15-factor confluence scoring system to identify high-probability reversal setups across all timeframes. WHAT MAKES THIS INDICATOR ORIGINAL This is NOT a simple mashup of existing indicators. The Kinetic Scalper features a completely custom momentum engine called the "Kinetic Pulse" - a volume-weighted momentum oscillator with Fisher Transform normalization that fundamentally differs from standard RSI or other momentum indicators. Every component feeds into a unified algorithmic framework designed specifically for this system. KEY INNOVATIONS: KINETIC PULSE ENGINE Unlike standard RSI which uses simple price changes, the Kinetic Pulse applies: → Volume weighting to price movements (high-volume moves carry more weight) → EMA smoothing instead of traditional SMA (faster response to changes) → Fisher Transform normalization for improved signal clarity → Adaptive period adjustment based on current volatility regime → Result: A momentum oscillator that responds to conviction, not just price noise 15-FACTOR CONFLUENCE SCORING SYSTEM Every signal is graded based on the number of confirming factors present: → Momentum position (oversold/overbought extremes) → Momentum velocity (direction change confirmation) → Momentum acceleration (strength of reversal) → Multi-oscillator divergence (price vs. 3 oscillators) → Volume confirmation (above-average participation) → Volume delta analysis (buying vs. selling pressure) → Higher timeframe alignment (trend confirmation from larger timeframe) → Session timing (major forex session awareness) → Structure clearance (clear path to profit targets) → Support/resistance proximity (confluence with key levels) → Market regime filtering (trending vs. choppy conditions) Signals are graded A+, A, or B based on how many factors align: • CONSERVATIVE MODE: A+ requires 12+ factors, A requires 9+, B requires 7+ • BALANCED MODE: A+ requires 10+ factors, A requires 7+, B requires 5+ • AGGRESSIVE MODE: A+ requires 8+ factors, A requires 5+, B requires 3+ TRADE ANALYSIS STATE MACHINE A sophisticated monitoring system that tracks trade conditions in real-time using: → 5-state analysis framework (Factors Aligned / Positive Bias / Mixed Signals / Factors Weakening / Negative Bias) → Hysteresis-based transitions (different thresholds to enter vs. exit states) → Confidence smoothing with EMA (reduces noise, prevents flip-flopping) → Minimum commitment periods before state changes → Override logic for significant events (near TP/SL, momentum reversals) → Result: Stable, actionable guidance that doesn't change on every bar INSTRUMENT-AWARE CALIBRATION Automatically detects what you're trading and applies optimized parameters: → Forex Majors: Standard ATR, high session weight → Forex Crosses: Tighter stops, moderate session weight → Crypto: Wider stops (1.8x multiplier), reduced session weight (24/7 markets) → Indices: Moderate-wide stops, high session weight → Commodities: Moderate stops, moderate session weight WHAT THIS INDICATOR DOES The Kinetic Scalper is designed to identify high-confluence reversal opportunities by analyzing multiple dimensions of market behavior simultaneously. CORE FUNCTIONS: 1. SIGNAL GENERATION → Identifies potential reversal points at oversold/overbought extremes → Confirms with multi-oscillator divergence detection → Validates with volume, higher timeframe, and structural analysis → Filters out low-probability setups automatically → Grades signals based on total confluence factors present 2. AUTOMATED TRADE TRACKING → Calculates structure-based or ATR-based stop loss levels → Projects take profit targets using risk-to-reward ratios → Monitors live position status (P/L, distance to targets, R-multiple) → Tracks TP1 and TP2 hits automatically → Displays outcome markers (TP HIT, PARTIAL WIN, STOPPED) 3. REAL-TIME CONDITION MONITORING → Analyzes 6 factor categories during active trades → Provides confidence scoring (0-100 scale) → Generates actionable guidance based on current market state → Alerts when conditions deteriorate or improve → Helps with trade management decisions 4. COMPREHENSIVE MARKET ANALYSIS → Session detection (Asian, London, New York, Overlap) → Volatility regime identification (Low, Normal, High, Extreme) → Trend state classification (Trending Up/Down, Ranging, Transitioning) → Volume analysis (relative volume and delta approximation) → Choppiness filtering (blocks signals in ranging markets) WHY USE THIS INDICATOR PROBLEM: Most momentum indicators generate too many false signals at extremes. SOLUTION: The Kinetic Scalper requires MULTIPLE confirming factors before generating a signal, dramatically reducing noise and focusing on high-confluence setups. ADVANTAGES: ✓ QUALITY OVER QUANTITY → Signal grading ensures you can filter for only the highest-quality setups → A+ signals have 10-12+ confirming factors aligned → Cooldown periods prevent over-trading the same move ✓ COMPLETE TRADE FRAMEWORK → Entry signals with confluence justification → Calculated stop loss based on market structure or ATR → Two profit targets with clear risk-to-reward ratios → Live trade monitoring with factor analysis → Outcome tracking and visual markers ✓ ADAPTIVE TO MARKET CONDITIONS → Volatility-based period adjustment for momentum calculations → Instrument-specific ATR multipliers → Session awareness for forex traders → Higher timeframe trend filtering → Automatic regime detection (trending vs. choppy) ✓ TRANSPARENT METHODOLOGY → Every input has detailed tooltips explaining its purpose → Signal tooltips show exactly why a signal was generated → Dashboard displays all relevant market conditions → Factor scores are visible during trades → No "black box" mystery calculations ✓ NON-REPAINTING & RELIABLE → All signals use barstate.isconfirmed (only on closed bars) → Higher timeframe data uses lookahead_off with historical offset → No future data access or repainting behavior → What you see is what you get - signals don't disappear or move HOW THE INDICATOR WORKS SIGNAL GENERATION PROCESS: STEP 1: MOMENTUM ANALYSIS The Kinetic Pulse engine calculates volume-weighted momentum: → Price changes are weighted by volume ratio vs. 20-bar average → High-volume moves have more influence on the oscillator → Gains and losses are smoothed using EMA (not SMA like RSI) → Fisher Transform is applied for normalization to 0-100 scale → Result: Momentum reading that emphasizes conviction, not noise STEP 2: REVERSAL DETECTION The indicator looks for potential reversal conditions: → Kinetic Pulse reaching oversold zone (below dynamic lower threshold) → Momentum velocity turning positive after being negative (for longs) → OR bullish divergence detected on multiple oscillators → Price making lower lows while oscillators make higher lows = divergence STEP 3: MULTI-OSCILLATOR DIVERGENCE CONFIRMATION Divergence is validated across three sources: → Kinetic Pulse divergence → CCI divergence → Stochastic divergence → Multiple oscillators confirming divergence increases signal reliability STEP 4: CONFLUENCE FACTOR SCORING The system evaluates all 15 possible confirming factors: → Momentum position: Is pulse oversold/overbought? (+0 to +2 points) → Momentum direction: Is velocity reversing? (+0 to +2 points) → Momentum acceleration: Is reversal strengthening? (+0 to +1 point) → Divergence count: How many oscillators show divergence? (+0 to +2 points) → Volume strength: Is volume above 1.3x average? (+0 to +1 point) → Volume delta: Is cumulative delta positive/negative? (+0 to +1 point) → HTF alignment: Does higher timeframe support direction? (+0 to +2 points) → Session timing: Is it a prime trading session? (+0 to +1 point) → Clear air: Is path to targets clear of obstacles? (+0 to +1 point) → Structure confluence: Are we near support/resistance? (+0 to +1 point) → Market regime: Is market trending, not choppy? (+0 to +1 point) Total possible score: 15 points Minimum for signal: 3-12 points depending on sensitivity mode STEP 5: FILTER VALIDATION Before generating a signal, additional checks are performed: → Volume must be above minimum threshold (if filter enabled) → Higher timeframe must not oppose the signal direction (if filter enabled) → Target path must be clear of major resistance/support (if filter enabled) → Volatility must not be EXTREME (blocks signals in chaos) → Risk-to-reward ratio must meet minimum requirement → Cooldown period must have elapsed since last signal STEP 6: SIGNAL GRADING If all filters pass, the signal is graded based on score: → A+ Grade: Highest confluence (8-12+ factors depending on sensitivity) → A Grade: High confluence (5-9+ factors) → B Grade: Moderate confluence (3-7+ factors) Only graded signals (A+, A, or B) are displayed. STEP 7: TRADE LEVEL CALCULATION Stop loss and targets are calculated automatically: STOP LOSS METHODS: • Structure-Based: Uses recent swing low/high with ATR buffer, constrained by min/max ATR limits • ATR-Based: Pure ATR multiplier with min/max constraints • Fixed ATR: Simple ATR multiplier, no adjustments TARGET CALCULATION: • TP1: Entry ± (Stop Distance × Target 1 R:R) • TP2: Entry ± (Stop Distance × Target 2 R:R) • Default: TP1 at 1.0 R:R (1:1), TP2 at 2.0 R:R (1:2) STEP 8: TRADE MONITORING Once a signal is taken, the indicator tracks: → Current P/L in ticks and R-multiples → Distance to each target in ATR units → Distance to stop loss in ATR units → TP1 hit detection (marks with label, updates lines) → TP2 hit detection (closes trade, marks outcome) → Stop loss hit detection (closes trade, differentiates partial vs. full loss) STEP 9: FACTOR ANALYSIS (DURING TRADES) The Trade Analysis Panel monitors 6 key factor categories: → Momentum: Is momentum still aligned with trade direction? (-15 to +15 pts) → Position: Current R-multiple position (-12 to +12 pts) → Volume: Is volume still supportive? (-6 to +6 pts) → HTF Alignment: Does HTF still support trade? (-6 to +8 pts) → Target Proximity: How close are we to targets? (0 to +10 pts) → Stop Proximity: Are we dangerously close to stop? (-15 to +3 pts) Raw scores are summed and smoothed using 5-bar EMA to create Confidence Score (0-100). STEP 10: STATE MACHINE TRANSITIONS Based on smoothed confidence, the system transitions between 5 states: → FACTORS ALIGNED (72+): Everything looks good → POSITIVE BIAS (58-72): Conditions favorable → MIXED SIGNALS (48-58): Neutral conditions → FACTORS WEAKENING (22-48): Concerning signals → NEGATIVE BIAS (<22): Poor conditions Hysteresis prevents rapid flipping between states (different entry/exit thresholds). RECOMMENDED TIMEFRAMES & INSTRUMENTS TIMEFRAME VERSATILITY: Despite the name "Scalper," this indicator works on ALL timeframes: ✓ LOWER TIMEFRAMES (1m - 15m) → Ideal for: Scalping and very short-term trades → Expect: More signals, faster trades, requires active monitoring → Best for: Forex majors, liquid crypto pairs → Tip: Use Conservative sensitivity to reduce noise ✓ MID TIMEFRAMES (15m - 1H) → Ideal for: Intraday trading and day trading → Expect: Moderate signal frequency, 1-4 hour trade duration → Best for: Forex, indices, major crypto → Tip: Balanced sensitivity works well here ✓ HIGHER TIMEFRAMES (4H - Daily) → Ideal for: Swing trading and position trading → Expect: Fewer signals, higher-quality setups, multi-day trades → Best for: All instruments → Tip: Can use Aggressive sensitivity for more opportunities INSTRUMENT COMPATIBILITY: ✓ FOREX MAJORS (EUR/USD, GBP/USD, USD/JPY, etc.) → Auto-detected or manually select "Forex Major" → Session filtering is highly valuable here → London/NY overlap generates best signals ✓ FOREX CROSSES (EUR/GBP, AUD/NZD, etc.) → Auto-detected or manually select "Forex Cross" → Slightly tighter stops applied automatically → Session weight reduced vs. majors ✓ CRYPTOCURRENCIES (BTC, ETH, SOL, etc.) → Auto-detected or manually select "Crypto" → Wider stops (1.8x multiplier) due to volatility → Session filtering less relevant (24/7 markets) → Works well on both spot and perpetual futures ✓ INDICES (S&P 500, NASDAQ, DAX, etc.) → Auto-detected or manually select "Index" → Session opens (NY, London) are important → Moderate stop widths applied ✓ COMMODITIES (Gold, Silver, Oil, etc.) → Auto-detected or manually select "Commodity" → Moderate stops and session awareness → Works well on both spot and futures VISUAL ELEMENTS EXPLAINED SIGNAL MARKERS: The indicator offers 3 display styles (choose in settings): • PREMIUM STYLE (Default) → Signal appears below/above candles with connecting line → Background panel with grade badge (LONG , SHORT , etc.) → Entry price displayed → Direction arrow pointing to entry candle → Most informative, best for detailed analysis • MINIMAL STYLE → Simple dot marker with grade text next to it → Clean, unobtrusive design → Best for mobile devices or cluttered charts → Less visual noise • CLASSIC STYLE → Diamond marker with grade badge below/above → Traditional indicator aesthetic → Good balance between info and simplicity ALL STYLES INCLUDE: → Signal tooltips with complete trade plan details → Grade display (A+, A, or B) → Color coding (bright colors for A+, standard for A/B) SIGNAL TOOLTIP CONTENTS: When you hover over any signal marker, you'll see: → Signal direction and grade → Confluence score (actual points vs. required) → Reason for signal (divergence type, reversal pattern) → Complete trade plan (Entry, Stop, TP1, TP2) → Risk in ticks → Risk-to-reward ratios → Market conditions at signal (Pulse value, HTF status, Volume, Session) TRADE LEVEL LINES: When Trade Tracking is enabled: • ENTRY LINE (Yellow/Gold) → Solid horizontal line at entry price → Shaded zone around entry (±ATR buffer) → Label showing entry price → Extends 20-25 bars into future • STOP LOSS LINE (Orange/Red) → Dashed line at stop level → Label showing stop price and distance in ticks → Turns dotted and changes color after TP1 hit (breakeven implied) → Deleted when trade closes • TAKE PROFIT 1 LINE (Blue) → Dotted line at TP1 level → Label showing price and R:R ratio (e.g., "1:1.0") → Turns solid and changes to green when hit → Deleted after TP1 hit • TAKE PROFIT 2 LINE (Blue) → Solid line at TP2 level → Label showing price and R:R ratio (e.g., "1:2.0") → This is the "full win" target → Deleted when trade closes OUTCOME MARKERS: When trade milestones are reached: • - Green label appears when first target is touched • - Green label when second target is touched (trade complete) • - Red label if stop loss hit before any target • - Orange label if TP1 hit but then stopped out PREVIOUS DAY LEVELS: If enabled (Show Previous Day Levels): • PDH (Previous Day High) - Solid red/orange line → Label shows "PDH: " → Useful resistance reference for intraday trading • PDL (Previous Day Low) - Solid green line → Label shows "PDL: " → Useful support reference for intraday trading BACKGROUND TINTS: Subtle background colors indicate states: → Light green tint: Active long position being tracked → Light red tint: Active short position being tracked → Light orange tint: Extreme volatility warning (signals blocked) DASHBOARD GUIDE The indicator features TWO dashboard panels: ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ MAIN DASHBOARD (Top Right by default) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHEN NO TRADE IS ACTIVE: → Bias: Current market bias (BULLISH, BEARISH, NEUTRAL, LEAN LONG/SHORT) → Based on Kinetic Pulse position and velocity → Helps you understand overall momentum direction → Pulse: Current Kinetic Pulse value (0-100 scale) → <30 = Oversold (potential long setups developing) → >70 = Overbought (potential short setups developing) → 40-60 = Neutral zone → Volatility: Current volatility regime (LOW, NORMAL, HIGH, EXTREME) → Calculated from ATR ratio vs. 100-period average → EXTREME volatility blocks all signals (too chaotic) → Trend: Market state classification → TREND UP / TREND DOWN: ADX > 25, directional movement clear → RANGING: ADX < 20, choppy conditions → TRANSITIONING: ADX 20-25, developing conditions → VOLATILE: Extreme ATR regime → Session: Current forex session → ASIAN (00:00-08:00 UTC) → LONDON (07:00-16:00 UTC) → NEW YORK (13:00-22:00 UTC) → LDN/NY (13:00-16:00 UTC) - Overlap period, highest volatility → OFF-HOURS: Outside major sessions → Volume: Current volume vs. 20-bar average → Displayed as multiplier (e.g., "1.45x" = 45% above average) → Green if >1.3x (high volume, bullish for signal quality) → Red if <0.8x (low volume, bearish for signal quality) → HTF: Higher timeframe analysis status → BULLISH: HTF momentum supports longs → BEARISH: HTF momentum supports shorts → NEUTRAL: No clear HTF direction → Best Score: Highest confluence score currently available → Shows both long and short scores → Format: " / " → Example: "8/7 " means long score is 8, threshold is 7, long is leading → Helps you anticipate which direction might signal next → PDH/PDL: Previous day high and low prices → Quick reference for intraday support/resistance WHEN TRADE IS ACTIVE: → Trade: Direction and grade (e.g., "LONG ") → Entry: Entry price of current trade → P/L: Current profit/loss → Shown in ticks and R-multiples → Format: "+45 | +0.75R" or "-20 | -0.35R" → Green when positive, red when negative → TP1: First target status → Shows price and distance if not hit → Shows "HIT" in green if reached → TP2: Second target price and distance → Stop: Stop loss price and current distance from stop → Bars: Number of bars since entry (trade duration) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ TRADE ANALYSIS PANEL (Bottom Left by default) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ This panel provides algorithmic analysis of market conditions. It does NOT provide investment advice or recommendations. WHEN NO TRADE IS ACTIVE: Shows scanning status and signal readiness: → Long/Short Readiness Gauges → Visual bar showing proximity to signal threshold → Score display (e.g., "8/7" means 8 points scored, 7 needed) → "RDY" indicator when threshold reached → Status Messages → "Scanning for setups..." - Normal scanning mode → "Long setup ready - cooldown: X bars" - Signal qualified but in cooldown → "Oversold conditions - watch for reversal" - Setup developing → "Choppy conditions detected" - Warning about market state → "Extreme volatility - signals blocked" - Safety filter active WHEN TRADE IS ACTIVE: Header shows current analysis state: → FACTORS ALIGNED (Green) - Everything looks good, confidence 72+ → POSITIVE BIAS (Light Green) - Conditions favorable, confidence 58-72 → MIXED SIGNALS (Blue) - Neutral conditions, confidence 48-58 → FACTORS WEAKENING (Orange) - Concerning signals, confidence 22-48 → NEGATIVE BIAS (Red) - Poor conditions, confidence <22 Confidence Score: → Displayed as percentage (0-100%) → Visual gauge (|||||.....) → Trend indicator (Rising, Falling, Stable) → Shows momentum of confidence change Factor Breakdown (if enabled): Shows 6 factor categories with individual scores: → Momentum: Is momentum aligned with trade? (-15 to +15 points) → Positive if velocity matches trade direction → Negative if momentum opposes trade → Position: Current R-multiple analysis (-12 to +12 points) → Positive if trade is in profit → Negative if underwater → Score increases as profit grows → Volume: Is volume supportive? (-6 to +6 points) → Positive if volume above average → Negative if volume weak → HTF Align: Higher timeframe status (-6 to +8 points) → Positive if HTF still supports trade direction → Negative if HTF turned against trade → Target: Proximity to profit targets (0 to +10 points) → Higher score when approaching targets → Bonus if TP1 already hit and near TP2 → Stop Dist: Distance from stop loss (-15 to +3 points) → Negative if dangerously close to stop (<0.3 ATR) → Positive if well away from stop (>1.5 ATR) Each factor shows: • Score value with +/- indicator • Trend symbol: + (improving), - (deteriorating), = (stable) • Visual gauge Guidance Messages: → "TARGET 2 APPROACHING" - TP2 within 0.3 ATR → "TARGET 1 APPROACHING" - TP1 within 0.3 ATR → "STOP PROXIMITY WARNING" - Stop within 0.3 ATR → "Factors aligned - Holding" - Positive state, stay in trade → "Conditions favorable" - Still looking good → "Conditions mixed - " - Neutral assessment → "Factors deteriorating" - Warning of weakening setup → "Confluence weakening - secure gains" - Consider exit if profitable COMPACT MODE (Mobile-Friendly): → Reduces panel size by showing only essential info → Factor icons instead of full breakdowns → Simplified guidance messages → Perfect for smaller screens SETTINGS GUIDE MASTER SETTINGS: Instrument Type → Purpose: Optimizes ATR multipliers and session weights for your asset → Options: Auto-Detect (recommended), Forex Major, Forex Cross, Crypto, Index, Commodity → Default: Auto-Detect → When to change: If auto-detection is incorrect for your symbol Signal Sensitivity → Purpose: Controls how many factors required before generating signals → Options: • Conservative: Requires 12+ for A+, 9+ for A, 7+ for B (fewer, highest quality) • Balanced: Requires 10+ for A+, 7+ for A, 5+ for B (recommended) • Aggressive: Requires 8+ for A+, 5+ for A, 3+ for B (more frequent) → Default: Balanced → When to change: If you want fewer signals (Conservative) or more opportunities (Aggressive) Enable Trade Signals → Purpose: Master on/off switch for signal generation → Default: ON → When to disable: If you only want to use the analysis dashboards without signals Enable Trade Tracking → Purpose: Tracks active trades and monitors conditions until TP/SL hit → Default: ON → When to disable: If you manage trades manually and don't want automatic tracking Show Entry/Stop/Target Levels → Purpose: Displays trade plan lines and labels on chart → Default: ON → When to disable: If you prefer clean charts or manage levels yourself DISPLAY SETTINGS: Color Theme → Purpose: Optimizes colors for your chart background → Options: Dark (for dark charts), Light (for light charts) → Default: Dark Signal Display Style → Purpose: Visual style of signal markers → Options: • Premium: Badge with line and background panel (most detailed) • Minimal: Simple dot with grade text (cleanest) • Classic: Diamond marker with badge (traditional) → Default: Premium Signal Distance → Purpose: How far signal labels appear from price bars (in ATR units) → Range: 0.5 to 10.0 → Default: 2.0 → When to adjust: Increase to 3.0-4.0 if signals hide behind candle wicks TP/SL Label Distance → Purpose: Spacing of price labels to prevent overlap → Range: 0.5 to 5.0 → Default: 1.5 Show Previous Day Levels → Purpose: Display PDH/PDL reference lines → Default: ON → Best for: Intraday traders who respect previous day levels MAIN DASHBOARD: Show Main Dashboard → Purpose: Toggle visibility of market conditions table → Default: ON Main Dashboard Position → Options: Top Right, Top Left, Bottom Right, Bottom Left → Default: Top Right → When to change: To avoid overlap with TradingView's built-in panels TRADE ANALYSIS PANEL: Show Trade Analysis Panel → Purpose: Toggle factor analysis dashboard → Default: ON Analysis Panel Position → Options: Top Right, Top Left, Bottom Right, Bottom Left, Middle Right, Middle Left → Default: Bottom Left → Recommended: Bottom Right or Middle Right to avoid overlap with Main Dashboard Compact Mode → Purpose: Reduces panel size for mobile or smaller screens → Default: OFF → When to enable: Mobile trading, small screens, or minimalist preference Show Factor Details → Purpose: Displays individual factor scores vs. overall confidence only → Default: ON → When to disable: For more compact view showing only state and confidence RISK MANAGEMENT: Stop Loss Method → Purpose: How stop loss distance is calculated → Options: • Structure-Based: Uses swing highs/lows with ATR buffer (recommended) • ATR-Based: Pure ATR multiplier with min/max constraints • Fixed ATR: Simple multiplier, no adjustments → Default: Structure-Based → Impact: Structure-Based respects market geometry but constrains within safe limits ATR Stop Multiplier → Purpose: Multiplier for ATR-based stop calculation → Range: 0.5 to 3.0 → Default: 1.5 → When to adjust: • Increase to 2.0-2.5 for more breathing room (fewer false stops) • Decrease to 1.0-1.2 for tighter stops (but more stop-outs) Maximum Stop Distance (ATR) → Purpose: Cap on stop width to prevent excessive risk → Range: 1.0 to 5.0 → Default: 2.5 → Impact: If structure-based stop exceeds this, ATR-based stop is used instead Minimum Stop Distance (ATR) → Purpose: Floor on stop width to avoid noise-induced stops → Range: 0.2 to 1.0 → Default: 0.5 → Impact: Prevents stops too tight to survive normal volatility Target 1 Risk/Reward Ratio → Purpose: R:R for first profit target → Range: 0.5 to 2.0 → Default: 1.0 (1:1 ratio) → Common values: 1.0 for quick profit taking, 1.5 for patient trading Target 2 Risk/Reward Ratio → Purpose: R:R for second profit target (full win) → Range: 1.0 to 4.0 → Default: 2.0 (1:2 ratio) → Common values: 2.0-3.0 for balanced risk/reward Minimum R:R Required → Purpose: Filters out signals with poor risk/reward → Range: 0.5 to 2.0 → Default: 1.0 → Impact: Signals where potential reward doesn't meet this ratio are rejected → WARNING: Always ensure your position sizing means a stop loss = no more than 1-2% of your account, regardless of R:R ratio SIGNAL FILTERS: Session Awareness → Purpose: Weights signals higher during major forex sessions → Default: ON → Impact: Doesn't block signals, but session quality factors into scoring → Best for: Forex traders Session Timezone → Purpose: Timezone for session calculations → Options: UTC, America/New_York, Europe/London, Asia/Tokyo, Asia/Hong_Kong → Default: UTC → When to change: Match your broker's server time Higher Timeframe Alignment → Purpose: Checks HTF momentum before generating signals → Default: ON → Impact: Filters counter-trend signals, improves quality → Recommended: Keep enabled HTF Timeframe → Purpose: Which higher timeframe to check → Default: Auto (blank field) → Auto selection: • 1m chart → 5m HTF • 5m chart → 15m HTF • 15m chart → 1H HTF • 1H chart → 4H HTF • 4H+ chart → Daily HTF → Manual override: Enter any timeframe (e.g., "60" for 1-hour) Volume Confirmation → Purpose: Requires above-average volume for signals → Default: ON → Impact: Filters low-liquidity false signals → Recommended: Keep enabled Minimum Volume Ratio → Purpose: Volume threshold vs. 20-bar average → Range: 0.3 to 2.0 → Default: 0.8 (80% of average) → When to adjust: • Increase to 1.2-1.5 for only high-volume signals • Decrease to 0.5-0.7 for more permissive filtering Structure Clearance Check → Purpose: Ensures clear path to targets (no nearby resistance/support) → Default: ON → Impact: Prevents trades with immediate obstacles → Recommended: Keep enabled Minimum Bars Between Signals → Purpose: Cooldown period after each signal → Range: 1 to 10 → Default: 3 → Impact: After a signal, this many bars must pass before another in same direction → When to adjust: • Increase to 5-7 to prevent over-trading • Decrease to 1-2 for faster re-entries ADVANCED TUNING: Momentum Period → Purpose: Base period for Kinetic Pulse calculation → Range: 5 to 30 → Default: 14 → When to adjust: • Lower (8-10): More responsive, noisier • Higher (18-21): Smoother, slower to react → Note: If Adaptive Period enabled, this is adjusted automatically Adaptive Period → Purpose: Auto-adjusts momentum period based on volatility → Default: ON → Impact: Shortens period in high volatility, lengthens in low volatility → Recommended: Keep enabled for automatic optimization Divergence Lookback → Purpose: How far back to search for divergence patterns → Range: 10 to 60 → Default: 30 → When to adjust: • Shorter (15-20): Only recent divergences • Longer (40-50): Catches older divergences (may be less relevant) Swing Detection Bars → Purpose: Bars required on each side to confirm swing high/low → Range: 2 to 7 → Default: 3 → Impact on stops: • Lower (2-3): More swing points, potentially tighter stops • Higher (5-7): Only major swings, wider stops Choppiness Index Threshold → Purpose: Threshold above which market considered choppy → Range: 38.2 to 80.0 → Default: 61.8 → Impact: • Lower (50-55): Stricter quality filter (fewer signals in ranging markets) • Higher (65-70): More permissive (allows signals in choppier conditions) HOW TO READ SIGNALS SIGNAL ANATOMY: When a signal appears, you'll see: 1. DIRECTIONAL MARKER → Arrow, dot, or diamond pointing to entry candle (depends on style) → Positioned below price for LONG, above price for SHORT → Connected to price with line (Premium style) 2. GRADE BADGE → Displays signal quality: LONG , SHORT , etc. → Color coding: • Bright green/cyan for A+ longs • Standard green for A/B longs • Bright pink/magenta for A+ shorts • Standard red for A/B shorts 3. ENTRY PRICE (Premium style only) → Shows exact entry price at signal generation 4. TOOLTIP (all styles) → Hover over signal to see complete trade plan → Includes: Entry, Stop, TP1, TP2, Risk, R:R ratios, market conditions, signal reason, confluence score INTERPRETING GRADES: → A+ SIGNALS (Highest Quality) • 8-12+ confirming factors aligned • Multiple divergences OR strong momentum reversal • HTF alignment + volume + session timing + clear structure • These are your highest-probability setups • Recommended action: Give these priority, consider larger position size → A SIGNALS (High Quality) • 5-9+ confirming factors aligned • Good confluence, most key factors present • Missing 1-2 optimal conditions • These are still quality trades • Recommended action: Standard position size, solid setups → B SIGNALS (Moderate Quality) • 3-7+ confirming factors aligned • Minimum viable confluence • May be missing HTF alignment, volume, or session timing • Higher variance outcomes • Recommended action: Smaller position size or skip if conservative SIGNAL NARRATIVE: Each signal tooltip includes a narrative explaining WHY it was generated: → "Multi-divergence at oversold extreme" • Multiple oscillators showing bullish divergence • Kinetic Pulse in oversold zone • High-quality reversal setup → "Bullish divergence near support" • Divergence detected • Price near key support level (swing low or PDL) • Structure confluence → "Momentum reversal with HTF alignment" • Kinetic Pulse velocity reversing • Higher timeframe supports direction • Strong trend-following setup → "Oversold momentum reversal" • Extreme Kinetic Pulse reading reversing • May not have divergence but strong momentum shift READING THE TRADE PLAN: Every signal comes with a complete trade plan: → ENTRY: The close price of the signal candle • This is where the signal triggered • If using limit orders, you might improve on this price → STOP: Calculated stop loss level • Based on your Stop Loss Method setting • Distance shown in ticks • Risk tolerance: Ensure this represents ≤1-2% of your account → TP1: First profit target • Default: 1:1 risk-reward • This is your partial profit or first exit • Consider taking 50% off at TP1 → TP2: Second profit target • Default: 1:2 risk-reward • This is your "full win" target • Hold remaining position for this level SIGNAL FREQUENCY EXPECTATIONS: Frequency varies by timeframe, sensitivity, and market conditions: → AGGRESSIVE MODE • Lower timeframes (1m-5m): 5-15 signals per day • Mid timeframes (15m-1H): 2-5 signals per day • Higher timeframes (4H-D): 1-3 signals per week → BALANCED MODE (Default) • Lower timeframes: 3-8 signals per day • Mid timeframes: 1-3 signals per day • Higher timeframes: 2-5 signals per week → CONSERVATIVE MODE • Lower timeframes: 1-4 signals per day • Mid timeframes: 0-2 signals per day • Higher timeframes: 1-3 signals per week Note: Frequency also depends on market volatility and trending vs. ranging conditions. Example - Kinetic Scalper Trade Sequence Here's an example showing the complete trade lifecycle with all dashboard transitions, annotations, and descriptions. INSTRUMENT & TIMEFRAME DETAILS Symbol: Nifty 50 Index (NSE) Date: December 15, 2025 Session: London session (active trading hours) Instrument Type: Index (auto-detected) TRADE SEQUENCE BREAKDOWN SCREENSHOT 1: Pre-Signal Setup Building (Image 1) Time: ~12:00-14:30 UTC+5:30(approx.) Price Action: Uptrend showing signs of exhaustion near 26,200 Market State: Price at session highs Main Dashboard (Top Right): - Bias: LEAN SHORT - Pulse: 58.9 (approaching overbought) - Volatility: NORMAL - Trend: TRANSITIONING - Session: LONDON (favorable timing) - Volume: 0.98x (slightly below average) - HTF: BULLISH (caution for counter-trend) - Best Score: 9/5 (Short score building) - PDH/PDL: 26098.25 / 25938.95 Trade Analysis Panel (Bottom Left): - Status: NO ACTIVE TRADE - Long Score: 5/5 (RDY) - Short Score: 9/5 (RDY) - Panel Message: "Short pattern developing - score: 9" Description : Setup Development Phase: The indicator identifies a potential short opportunity as price reaches the previous day's high. The short confluence score has climbed to 9/15 points, meeting the 'Balanced' sensitivity threshold for a Grade B signal. Notice the 'LEAN SHORT' bias and the Kinetic Pulse reading of 58.9 approaching overbought territory. The Trade Analysis panel shows 'Short pattern developing' with 9/5 factors aligned. Key factors: momentum approaching reversal zone, price at resistance (PDH), and London session providing favorable conditions. SCREENSHOT 2: Signal Generated & Trade Entered (Image 2) Time: ~13:00 UTC+5:30 (signal bar) Entry Price: 26,184.65 Signal Grade: Grade Main Dashboard (Top Right): - Trade: SHORT - Entry: 26184.65 - P/L: 5.95 pts | +0.2R (early positive movement) - TP1: 26157.00 (33.2 pts away) - TP2: 26129.35 (60.84 pts away) - Stop: 26212.30 (22.1 pts away) - Bars: 1 (just entered) Trade Analysis Panel (Bottom Left): - Header: TRADE ANALYSIS - Status Bar: "Conditions mixed - improving 57%" - Confidence: 57% RISING - Factor Breakdown: - Momentum: -4 (velocity not yet aligned) - Position: +4 (slight profit) - Volume: +2 = (volume present) - HTF Align: +2 = (not strongly aligned) - Target: +0 - (far from TP) - Stop Dist: +3 - (good distance) - Bottom Status: "Conditions mixed - Monitoring" - Disclaimer: "Analysis only - Not financial advice" Description: Signal Activation: A Grade A short signal triggers at 26,184.65 after the short confluence score reached qualifying levels. The indicator places a structure-based stop loss at 26,212.30 (27.65 points risk) with dual targets at 1:1 and 1:2 risk-reward ratios. The Trade Analysis Panel immediately begins monitoring with an initial confidence score of 57% - classified as 'MIXED SIGNALS' but showing a 'RISING' trend. Factor analysis reveals: momentum not yet aligned (-4 points as price just reversed), position slightly favorable (+4 points already +0.2R), volume adequate (+2), HTF showing weak alignment (+2 as we're counter-trend), stop well-placed (+3), but targets still distant (0 points). Notice how the Main Dashboard switches from market scanning mode to active trade tracking, now displaying entry price, live P/L in both points (5.95 pts) and R-multiples (+0.2R), and distances to all key levels. The analysis panel provides real-time factor scoring to help monitor trade health. SCREENSHOT 3: TP1 Hit - Trade Performing Well (Image 3) Time: ~14:20 UTC+5:30(approx) Price: ~26,154 (TP1 zone) Bars in Trade: 29 Main Dashboard (Top Right): - Trade: SHORT - Entry: 26184.65 - P/L: 30.85 pts | +1.12R (excellent progress) - TP1: HIT (displayed in green) - TP2: 26129.35 (24.44 pts away) - Stop: 26212.30 (58.5 pts away - well protected) - Bars: 29 Trade Analysis Panel (Bottom Left): - Header: TRADE ANALYSIS - Status Bar: "Multiple factors positive" - Confidence: 78% RISING - Factor Breakdown: - Momentum: +8 = (ALIGNED) - Position: +8 + (strong profit zone) - Volume: +2 + (continued support) - HTF Align: +8 = (now strongly aligned) - Target: +10 + (TP1 achieved, approaching TP2) - Stop Dist: +3 + (excellent cushion) - Bottom Status: "Multiple factors positive" - Visual State: Green background (FACTORS ALIGNED state) Description: Trade Execution Phase - First Target Achieved: After 29 bars , price reaches the first take-profit target at 26,157.00. The ' ' marker confirms partial profit taking. Current P/L shows +30.85 points (+1.12R), exceeding the initial 1:1 risk-reward. The Trade Analysis Panel shows dramatic improvement - confidence has surged to 78% (FACTORS ALIGNED state) with most factors now positive: - Momentum factor improved to +8 (velocity aligned with trade direction) - Position factor at +8 (over +1R profit zone) - HTF Align jumped to +8 (higher timeframe now confirming the move) - Target factor maxed at +10 (TP1 achieved, TP2 within reach) - Stop Distance at +3 (58.5 points cushion providing safety) Notice the panel status displays 'Multiple factors positive' with a green-tinted background, indicating optimal trade conditions. The confidence trend shows 'RISING' suggesting continued momentum. With TP1 secured and only 24.44 points to TP2, the trade is well-positioned for a full 1:2R win. SCREENSHOT 4: TP2 Reached - Trade Complete (Image 4) Time: ~15:00+ UTC+5:30 Final Exit: 26,129.35 (TP2) Final Result: Full TP2 win Main Dashboard (Top Right): - Bias: NEUTRAL (reverted to scanning mode) - Pulse: 45.2 (returned to neutral zone) - Volatility: NORMAL - Trend: TREND DOWN (confirmed the move) - Session: LONDON - Volume: 1.26x (increased as move developed) - HTF: BEARISH (fully aligned post-trade) - Best Score: 5/5 (neutral after completion) Trade Analysis Panel (Bottom Left): - Status: NO ACTIVE TRADE (reverted) - Long Score: 5/5 (RDY) - Short Score: 5/5 (RDY) - Panel Message: "Scanning - prime session active" - Light blue/cyan background (back to scanning mode) Description: Trade Completion - Full Target Achieved: The short trade reaches its second take-profit target at 26,129.35, securing a complete 1:2 risk-reward win. The ' ' marker confirms the exit. Final results: - Entry: 26,184.65 - Exit: 26,129.35 - Profit: 55.30 points (approximately +2.0R) - Outcome: Full TP2 success Post-Trade Analysis: After trade closure, the indicator automatically returns to market scanning mode. The Main Dashboard reverts to showing market conditions rather than trade metrics. Notice how the 'Trend' now displays 'TREND DOWN' - confirming the move we captured. Volume increased to 1.26x during the winning move, validating the signal quality. The Trade Analysis Panel switches back to 'NO ACTIVE TRADE' status and resumes displaying long/short setup scores. The confidence-based factor monitoring was instrumental throughout the trade: - Initial entry at 57% confidence (MIXED SIGNALS) - Peak confidence of 78% at TP1 (FACTORS ALIGNED) - Real-time factor updates helped confirm trade validity This example demonstrates the indicator's complete workflow: setup identification → signal generation → entry execution → live trade monitoring → systematic exit at targets. KEY FEATURES DEMONSTRATED 1. Dual Dashboard System - Main Dashboard: Market conditions (scanning) → Trade metrics (active position) - Analysis Panel: Setup scores (scanning) → Factor-based confidence (in-trade) 2. Visual Trade Management - Color-coded entry zones (yellow) - Risk levels clearly marked (red dashed stop) - Profit targets with R:R ratios labeled - Achievement markers ( , ) 3. Real-Time Factor Analysis - 6-factor scoring system (Momentum, Position, Volume, HTF, Target, Stop Dist) - Confidence percentage with trend indicators - State machine (MIXED → FACTORS ALIGNED) - Hysteresis prevents false state changes 4. Risk Management - Structure-based stop placement (respects swing highs) - Multiple take-profit levels (1:1 and 1:2 R:R) - Live P/L tracking in points and R-multiples - Distance monitoring to all key levels This complete example showcases the indicator's progression from setup identification through trade completion, demonstrating how the dual-dashboard system and factor-based analysis provide continuous trade guidance. The structured stop-loss and dual-target approach delivered the planned 1:2 risk-reward ratio with systematic, rule-based execution. ALERT SYSTEM The indicator includes 9 built-in alert conditions: SIGNAL ALERTS: → High-Grade Long Signal (A+) • Triggers only on A+ long signals • For traders who want only the highest-quality longs • Message: "KINETIC SCALPER: LONG @ " → High-Grade Short Signal (A+) • Triggers only on A+ short signals • For traders who want only the highest-quality shorts • Message: "KINETIC SCALPER: SHORT @ " → Long Signal • Triggers on ANY qualified long signal (A+, A, or B) • For traders who want all long opportunities • Message: "KINETIC SCALPER: LONG @ " → Short Signal • Triggers on ANY qualified short signal • For traders who want all short opportunities • Message: "KINETIC SCALPER: SHORT @ " TRADE MANAGEMENT ALERTS: → TP1 Hit • Triggers when first profit target is reached • Useful for partial profit taking notifications • Message: "KINETIC SCALPER: TP1 REACHED" → TP2 Reached • Triggers when second profit target is reached • Trade is complete, full win achieved • Message: "KINETIC SCALPER: TP2 REACHED" → Stop Loss Hit • Triggers when stop loss is reached • Important for trade management and risk tracking • Message: "KINETIC SCALPER: STOP LOSS" ANALYSIS STATE ALERTS: → Analysis State: Negative Bias • Triggers when factor analysis enters "Negative Bias" state • Warning that trade conditions are deteriorating • Consider reducing position or preparing to exit • Message: "KINETIC SCALPER: Analysis state changed to NEGATIVE BIAS" → Analysis State: Factors Weakening • Triggers when factor analysis enters "Factors Weakening" state • Caution that confluence is diminishing • Monitor trade closely • Message: "KINETIC SCALPER: Analysis state changed to FACTORS WEAKENING" HOW TO SET UP ALERTS: 1. Click the "Create Alert" button in TradingView 2. Condition: Select "Kinetic Scalper " 3. Choose your desired alert from the dropdown 4. Configure your alert options: → Once Per Bar Close (recommended for non-repainting) → Frequency: Once Per Bar Close or Only Once 5. Set expiration and notification methods (popup, email, webhook, etc.) 6. Create alert RECOMMENDED ALERT STRATEGY: For active traders: → Set "Long Signal" and "Short Signal" alerts for all opportunities → Set "TP1 Hit", "TP2 Reached", and "Stop Loss Hit" for trade management → Consider "Analysis State: Negative Bias" for trade monitoring For selective traders: → Set only "High-Grade Long Signal (A+)" and "High-Grade Short Signal (A+)" → Focus on the absolute highest-quality setups → Set TP/SL alerts for position management USAGE TIPS & BEST PRACTICES SIGNAL SELECTION: ✓ GRADE MATTERS → A+ signals have statistically more confluence factors → If you're conservative, trade only A+ signals → B signals can work but require more discretion ✓ CONFLUENCE WITH YOUR ANALYSIS → Use this indicator as CONFIRMATION, not sole decision criteria → Combine with your own support/resistance analysis → Check for fundamental events (news, economic data) → Respect major round numbers and psychological levels ✓ SESSION TIMING (Forex) → Best signals often occur during London/NY overlap → Avoid signals 10 minutes before major news releases → Asian session signals can be valid but lower liquidity ✓ TIMEFRAME CONFLUENCE → If you get an A+ signal on 15m, check if 1H chart agrees → Higher timeframe confirmation adds conviction → Avoid signals that oppose the daily/4H trend TRADE MANAGEMENT: ✓ POSITION SIZING → ALWAYS size positions so stop loss = 1-2% of account → Never risk more than you can afford to lose → Smaller position on B signals, standard on A, larger on A+ (within limits) ✓ PARTIAL PROFIT TAKING → Consider taking 50% off at TP1 → Move stop to breakeven after TP1 hit → Let remaining position run to TP2 ✓ TRAILING STOPS → The indicator doesn't auto-trail stops (manual decision) → After TP1, you might manually move stop to entry (breakeven) → Consider ATR-based trailing stop for runners ✓ WATCH THE ANALYSIS PANEL → If state changes to "Factors Weakening" while in profit, consider exit → "Negative Bias" during a trade is a strong warning → "Factors Aligned" confirms your trade thesis is still valid RISK MANAGEMENT: ✓ NEVER IGNORE STOPS → The calculated stop is there for a reason → Moving stop further away increases risk exponentially → If stopped out, accept it and wait for next setup ✓ AVOID REVENGE TRADING → If you get stopped out, resist urge to immediately re-enter → Signal cooldown helps with this → Wait for next qualified signal ✓ RESPECT VOLATILITY WARNINGS → If indicator shows "EXTREME" volatility, signals are blocked for a reason → Don't force trades in chaotic conditions → Wait for regime to normalize ✓ CORRELATION RISK → Be aware of correlation if trading multiple pairs → EUR/USD and GBP/USD are highly correlated → Don't stack risk on correlated instruments OPTIMIZATION: ✓ START WITH DEFAULTS → Default settings are well-tested → Don't over-optimize for recent market behavior → Give settings at least 20-30 trades before judging ✓ TIMEFRAME-SPECIFIC ADJUSTMENTS → Lower timeframes: Consider increasing Signal Distance to 3.0-4.0 → Higher timeframes: ATR Stop Multiplier might go to 2.0-2.5 → Crypto: Ensure Instrument Type is set to "Crypto" for proper stops ✓ SENSITIVITY CALIBRATION → Too many signals? Switch to Conservative → Missing good setups? Try Balanced or Aggressive → Quality > Quantity always ✓ KEEP A JOURNAL → Track which signal grades work best for you → Note which sessions produce best results → Review stopped trades for patterns THINGS TO AVOID: ✗ DON'T chase signals after several bars have passed ✗ DON'T ignore the stop loss or move it further away ✗ DON'T overtrade by taking every B-grade signal ✗ DON'T trade during major news if you're not experienced ✗ DON'T use this as your only analysis tool ✗ DON'T expect 100% win rate (no indicator has this) ✗ DON'T risk more than 1-2% per trade regardless of signal grade UNDERSTANDING THE METHODOLOGY WHY VOLUME WEIGHTING? Traditional momentum oscillators treat all price moves equally. A 10-point move on low volume is weighted the same as a 10-point move on high volume. The Kinetic Pulse corrects this by: → Calculating volume ratio vs. 20-bar average → Applying square root transformation to volume ratio (prevents extreme weights) → Multiplying price changes by volume weight → Result: High-volume moves influence the oscillator more than low-volume noise This helps filter false breakouts and emphasizes moves with participation. WHY FISHER TRANSFORM? Fisher Transform is a mathematical transformation that: → Normalizes probability distributions → Creates sharper turning points → Amplifies extremes while compressing the middle → Makes overbought/oversold levels more distinct Applied to the Kinetic Pulse, it helps identify genuine extremes vs. noise. WHY MULTI-OSCILLATOR DIVERGENCE? Single-source divergence can give false signals. By requiring divergence confirmation across multiple oscillators (Kinetic Pulse, CCI, Stochastic), the system filters out: → Divergences caused by calculation quirks in one oscillator → Temporary momentum anomalies → False divergence on noisy, low-timeframe charts Multiple sources confirming the same pattern increases reliability. WHY ADAPTIVE PERIODS? Fixed periods can be: → Too slow during high volatility (miss fast reversals) → Too fast during low volatility (generate noise) The adaptive system: → Shortens period when ATR ratio > 1.3 (high volatility = need faster response) → Lengthens period when ATR ratio < 0.7 (low volatility = need noise filtering) → Keeps period in reasonable range (60% to 140% of base period) → Result: Oscillator adjusts to current market pace automatically WHY HYSTERESIS IN STATE MACHINE? Without hysteresis, the analysis state would flip-flop on every bar, creating: → Confusing, contradictory guidance → Analysis paralysis → Lack of actionable information Hysteresis solves this by: → Using different thresholds to ENTER vs. EXIT a state → Example: Enter "Factors Aligned" at 72+ confidence, but don't exit until <62 → This creates stable states that persist through minor fluctuations → Requires minimum commitment period (3 bars) before state changes → Overrides commitment for significant events (near TP/SL) → Result: Stable, trustworthy analysis that changes only when truly warranted WHY CONFIDENCE SMOOTHING? Raw factor scores fluctuate bar-by-bar based on momentary conditions. Smoothing: → Uses 5-period EMA on raw confidence scores → Filters out single-bar anomalies → Preserves genuine trends in confidence → Prevents false state transitions → Result: More reliable assessment of actual trade health WHY INSTRUMENT-SPECIFIC PARAMETERS? Different instruments have different characteristics: → Forex is highly liquid, respects technical levels well, standard ATR works → Crypto is extremely volatile, needs wider stops (1.8x) to avoid false stops → Indices respect session opens strongly, session weighting is important → Commodities fall in between Auto-detection applies research-based multipliers automatically. WHY STRUCTURE-BASED STOPS? ATR-based stops can: → Place stop in middle of consolidation (easily hit) → Ignore obvious invalidation levels → Be too tight during expansion or too wide during contraction Structure-based stops: → Use actual swing highs/lows (where traders actually place stops) → Add small ATR buffer to avoid stop hunting → Constrain within min/max ATR limits for safety → Result: Stops that respect market geometry while managing risk DISCLAIMER & RISK WARNING READ THIS CAREFULLY BEFORE USING THIS INDICATOR This indicator is provided for EDUCATIONAL and INFORMATIONAL purposes only. ❌ NOT FINANCIAL ADVICE This indicator does NOT constitute financial advice, investment recommendations, or solicitation to buy or sell any financial instrument. All information is for educational purposes only. ❌ NO GUARANTEES → Past performance does NOT guarantee future results → No indicator can predict future price movements with certainty → Signal grades represent confluence, NOT win probability → A+ signals can lose, B signals can win - markets are probabilistic ❌ SUBSTANTIAL RISK Trading financial instruments involves SUBSTANTIAL RISK of loss: → You can lose your entire investment → Leveraged trading amplifies both gains AND losses → Never trade with money you cannot afford to lose → Never risk more than 1-2% of your account per trade ❌ YOUR RESPONSIBILITY → All trading decisions are YOUR responsibility → You must conduct your own analysis before entering trades → Consult a licensed financial advisor before trading → Understand the risks specific to your jurisdiction and situation → Only trade with capital you can afford to lose completely ❌ NO HOLY GRAIL → This indicator is a TOOL, not a complete trading system → It should be used as part of a broader analysis framework → Combine with your own technical analysis, risk management, and judgment → No indicator works 100% of the time in all market conditions ❌ ANALYSIS PANEL DISCLAIMER The "Trade Analysis Panel" provides ALGORITHMIC ANALYSIS of market factors. → It does NOT provide investment advice or recommendations → Factor scores are mathematical calculations, not predictions → Guidance messages are informational, not directives → All trading decisions remain your responsibility ❌ BACKTESTING LIMITATIONS → This is an indicator, not a strategy, so no backtesting results are provided → Any backtesting you perform includes hindsight bias and optimization bias → Historical performance does not indicate future performance → Slippage, commissions, and real-world execution differ from backtests ❌ MARKET CONDITIONS → This indicator performs differently in trending vs. ranging markets → Extreme volatility can produce false signals or whipsaws → Low liquidity periods increase execution risk → Major news events can invalidate technical analysis BY USING THIS INDICATOR, YOU ACKNOWLEDGE: → You have read and understood this disclaimer → You accept full responsibility for your trading decisions → You understand the substantial risks involved in trading → You will not hold the author liable for any losses incurred → You are using this tool as part of your own due diligence process KEY FEATURES SUMMARY ✅ Volume-Weighted Kinetic Pulse Engine (proprietary momentum calculation) ✅ 15-Factor Confluence Scoring System (graded signals: A+, A, B) ✅ Multi-Oscillator Divergence Detection (Pulse + CCI + Stochastic) ✅ Higher Timeframe Trend Alignment Filter ✅ Adaptive Period Adjustment (volatility-responsive) ✅ Instrument-Aware Calibration (Forex, Crypto, Indices, Commodities) ✅ Structure-Based Stop Loss Calculation (respects swing highs/lows) ✅ Automated Trade Tracking (entry, stop, TP1, TP2, P/L) ✅ Real-Time Factor Analysis State Machine (5-state system with hysteresis) ✅ Session Awareness (Asian, London, New York, Overlap) ✅ Volatility Regime Detection (blocks signals in extreme conditions) ✅ Choppiness Filter (reduces signals in ranging markets) ✅ Volume Confirmation (relative volume and delta analysis) ✅ Clean Air Check (validates clear path to targets) ✅ Comprehensive Dashboards (market conditions + trade analysis) ✅ Customizable Display (3 signal styles, color themes, positioning) ✅ 9 Built-In Alert Conditions (signals, TP/SL hits, state changes) ✅ Fully Non-Repainting (barstate.isconfirmed, lookahead_off) ✅ Previous Day Levels (PDH/PDL reference lines) ✅ Mobile-Friendly Compact Mode (for smaller screens) TECHNICAL SPECIFICATIONS → Pine Script Version: v6 → Indicator Type: Overlay (displays on price chart) → License: Mozilla Public License 2.0 → Copyright: BULLBYTE → Object Limits: 300 labels, 100 lines, 50 boxes → Memory Management: Automatic cleanup system (FIFO queue) → Repainting: Non-repainting (signals confirmed on bar close) → Timeframe Support: All timeframes (1s to Monthly) → Instrument Support: Forex, Crypto, Indices, Commodities, Stocks → HTF Data Handling: lookahead_off with historical offset VERSION HISTORY v1.0 - Initial Release → Kinetic Pulse engine with volume weighting and Fisher Transform → 15-factor confluence scoring system → Trade analysis state machine with hysteresis → Automated trade tracking and monitoring → Dual dashboard system (market conditions + factor analysis) → 9 alert conditions → 3 signal display styles → Instrument-aware calibration → Full risk management framework WHO IS THIS INDICATOR FOR? IDEAL FOR: ✓ Scalpers and day traders seeking high-confluence reversal entries ✓ Swing traders who want quality over quantity ✓ Traders who appreciate systematic, rules-based analysis ✓ Multi-timeframe traders who value HTF confirmation ✓ Forex traders who respect session timing ✓ Crypto traders needing volatility-adjusted parameters ✓ Traders who want complete trade management (entry, stop, targets) ✓ Analytical traders who want transparency in signal generation NOT IDEAL FOR: ✗ Traders seeking a "set and forget" holy grail system ✗ Traders who don't want to learn the methodology ✗ Traders unwilling to accept losing trades as part of the process ✗ Traders who need constant signals (this is a quality-focused system) ✗ Traders who ignore risk management FINAL THOUGHTS The Kinetic Scalper is the result of extensive research into momentum behavior, volume confirmation, and multi-factor confluence analysis. It's designed to identify high-probability reversal setups while maintaining strict risk management and providing complete transparency. This is NOT a magic solution. It's a sophisticated TOOL that requires: → Understanding of the methodology → Proper risk management discipline → Patience to wait for quality setups → Willingness to accept losses as part of trading → Integration with your own analysis and judgment Used properly as part of a complete trading plan, the Kinetic Scalper can help you identify high-confluence opportunities and manage trades systematically. Remember: Quality over quantity. Discipline over emotion. Risk management over everything. Trade smart. Trade safe. © 2025 BULLBYTE | Kinetic Scalper v1.0 | For Educational Purposes Only
Pine Script® indicator
by BullByte
6
Trend Prediction Meter [PointAlgo]The Trend Prediction Meter & Levels is a composite market-bias and volatility visualization tool designed to summarize trend strength, momentum, price positioning, and volatility into a single normalized score. It provides a structured framework to interpret directional bias and probable price expansion zones during active market conditions. Concept Overview Markets often reflect multiple conditions simultaneously—trend direction, momentum strength, price location within a range, and volatility. This indicator combines these elements into a unified Bullish Score (0–100), displayed as a meter and supported by projected ATR-based levels. Rather than focusing on a single signal, the script aims to present context about current market conditions. Bullish Score Composition (0–100) The meter represents a weighted blend of multiple market factors: 1. Trend Strength (EMA Structure) Uses a fast and slow EMA to assess directional bias. The distance between EMAs is normalized into a trend strength score. Strong separation indicates directional conviction; compression suggests balance. 2. Momentum Strength (RSI Blend) Combines a short-term and mid-term RSI. Helps capture both immediate momentum and broader directional stability. Higher readings indicate sustained bullish pressure, lower readings indicate bearish pressure. 3. Position Within Recent Range Measures where price is trading relative to its recent high–low range. Values near the top of the range reflect strength; values near the bottom reflect weakness. Mid-range positioning indicates equilibrium. 4. Volume Participation Compares current volume against its recent average. Acts as a minor confidence modifier rather than a primary driver. Each component is normalized and combined using fixed weights to produce a final Bullish Score between 0 and 100. Bias Classification The Bullish Score is translated into descriptive market states: Extreme Bullish Very Bullish Bullish Neutral Bearish Very Bearish These labels describe current bias, not future certainty. Meter Visualization The meter plot dynamically changes color based on the score range. A dashed midline at 50 represents balance. Background shading highlights strong bullish or bearish dominance zones. Crossovers of the 50-level indicate shifts in directional control. ATR-Based Projection Levels: To provide volatility context, the indicator calculates ATR-based upside and downside reference levels: Two potential expansion levels (TP1 and TP2) are projected above and below price. The distance of these levels adapts based on current bias strength. These levels are contextual reference zones, not fixed targets. Prediction Dashboard An optional side table summarizes key readings at the most recent bar: Symbol Current bias label Bullish Score Current price ATR value Upside and downside projection levels Directional comment (Upside favoured / Downside favoured / Balanced) This dashboard is designed to provide a quick structural overview without requiring manual calculation. Signals & Alerts Built-in alerts are available for: Bullish bias conditions Bearish bias conditions Bullish Score crossing above 50 Bullish Score crossing below 50 Alerts are informational and reflect internal state changes only. Customization: Users can adjust: RSI lengths EMA lengths Range lookback period ATR parameters Display options for the meter and dashboard This allows adaptation across different instruments and timeframes. Usage Notes Best suited for analytical interpretation rather than standalone decision-making. Designed to complement price action, structure, or other indicators. Works across multiple markets where volume and volatility data are available. Disclaimer : This indicator is intended for educational and analytical purposes only. It does not provide investment, trading, or financial advice. All signals and levels should be validated with independent analysis and appropriate risk management.
Pine Script® indicator
by pointalgo
Relative Strength Index_YJ//@version=5 indicator(title="MACD_YJ", shorttitle="MACD_YJ",format=format.price, precision=2) source = close useCurrentRes = input.bool(true, title="Use Current Chart Resolution?") resCustom = input.timeframe("60", title="Use Different Timeframe? Uncheck Box Above") smd = input.bool(true, title="Show MacD & Signal Line? Also Turn Off Dots Below") sd = input.bool(false, title="Show Dots When MacD Crosses Signal Line?") sh = input.bool(true, title="Show Histogram?") macd_colorChange = input.bool(true, title="Change MacD Line Color-Signal Line Cross?") hist_colorChange = input.bool(true, title="MacD Histogram 4 Colors?") // === Divergence inputs === grpDiv = "Divergence" calculateDivergence = input.bool(true, title="Calculate Divergence", group=grpDiv, tooltip="피벗 기반 정/역배 다이버전스 탐지 및 알람 사용") lookbackRight = input.int(5, "Lookback Right", group=grpDiv, minval=1) lookbackLeft = input.int(5, "Lookback Left", group=grpDiv, minval=1) rangeUpper = input.int(60, "Bars Range Upper", group=grpDiv, minval=1) rangeLower = input.int(5, "Bars Range Lower", group=grpDiv, minval=1) bullColor = input.color(color.new(#4CAF50, 0), "Bull Color", group=grpDiv) bearColor = input.color(color.new(#F23645, 0), "Bear Color", group=grpDiv) textColor = color.white noneColor = color.new(color.white, 100) res = useCurrentRes ? timeframe.period : resCustom fastLength = input.int(12, minval=1) slowLength = input.int(26, minval=1) signalLength= input.int(9, minval=1) fastMA = ta.ema(source, fastLength) slowMA = ta.ema(source, slowLength) macd = fastMA - slowMA signal = ta.sma(macd, signalLength) hist = macd - signal outMacD = request.security(syminfo.tickerid, res, macd) outSignal = request.security(syminfo.tickerid, res, signal) outHist = request.security(syminfo.tickerid, res, hist) // 가격도 같은 res로 hi_res = request.security(syminfo.tickerid, res, high) lo_res = request.security(syminfo.tickerid, res, low) // ── Histogram 색 histA_IsUp = outHist > outHist and outHist > 0 histA_IsDown = outHist < outHist and outHist > 0 histB_IsDown = outHist < outHist and outHist <= 0 histB_IsUp = outHist > outHist and outHist <= 0 macd_IsAbove = outMacD >= outSignal plot_color = hist_colorChange ? (histA_IsUp ? color.new(#00FF00, 0) : histA_IsDown ? color.new(#006900, 0) : histB_IsDown ? color.new(#FF0000, 0) : histB_IsUp ? color.new(#670000, 0) : color.yellow) : color.gray macd_color = macd_colorChange ? color.new(#00ffff, 0) : color.new(#00ffff, 0) signal_color = color.rgb(240, 232, 166) circleYPosition = outSignal // 골든/데드 크로스 (경고 해결: 먼저 계산) isBullCross = ta.crossover(outMacD, outSignal) isBearCross = ta.crossunder(outMacD, outSignal) cross_color = isBullCross ? color.new(#00FF00, 0) : isBearCross ? color.new(#FF0000, 0) : na // ── 플롯 plot(sh and outHist ? outHist : na, title="Histogram", color=plot_color, style=plot.style_histogram, linewidth=5) plot(smd and outMacD ? outMacD : na, title="MACD", color=macd_color, linewidth=1) plot(smd and outSignal? outSignal: na, title="Signal Line", color=signal_color, style=plot.style_line, linewidth=1) plot(sd and (isBullCross or isBearCross) ? circleYPosition : na, title="Cross", style=plot.style_circles, linewidth=3, color=cross_color) hline(0, "0 Line", linestyle=hline.style_dotted, color=color.white) // ===================== // Divergence (정배/역배) - 피벗 비교 // ===================== _inRange(cond) => bars = ta.barssince(cond) rangeLower <= bars and bars <= rangeUpper plFound = false phFound = false bullCond = false bearCond = false macdLBR = outMacD if calculateDivergence // 정배: 가격 LL, MACD HL plFound := not na(ta.pivotlow(outMacD, lookbackLeft, lookbackRight)) macdHL = macdLBR > ta.valuewhen(plFound, macdLBR, 1) and _inRange(plFound ) lowLBR = lo_res priceLL = lowLBR < ta.valuewhen(plFound, lowLBR, 1) bullCond := priceLL and macdHL and plFound // 역배: 가격 HH, MACD LH phFound := not na(ta.pivothigh(outMacD, lookbackLeft, lookbackRight)) macdLH = macdLBR < ta.valuewhen(phFound, macdLBR, 1) and _inRange(phFound ) highLBR = hi_res priceHH = highLBR > ta.valuewhen(phFound, highLBR, 1) bearCond := priceHH and macdLH and phFound // 시각화 (editable 파라미터 삭제) plot(plFound ? macdLBR : na, offset=-lookbackRight, title="Regular Bullish (MACD)", linewidth=2, color=(bullCond ? bullColor : noneColor), display=display.pane) plotshape(bullCond ? macdLBR : na, offset=-lookbackRight, title="Bullish Label", text=" Bull ", style=shape.labelup, location=location.absolute, color=bullColor, textcolor=textColor, display=display.pane) plot(phFound ? macdLBR : na, offset=-lookbackRight, title="Regular Bearish (MACD)", linewidth=2, color=(bearCond ? bearColor : noneColor), display=display.pane) plotshape(bearCond ? macdLBR : na, offset=-lookbackRight, title="Bearish Label", text=" Bear ", style=shape.labeldown, location=location.absolute, color=bearColor, textcolor=textColor, display=display.pane) // 알람 alertcondition(bullCond, title="MACD Regular Bullish Divergence", message="MACD 정배 다이버전스 발견: 현재 봉에서 lookbackRight 만큼 좌측.") alertcondition(bearCond, title="MACD Regular Bearish Divergence", message="MACD 역배 다이버전스 발견: 현재 봉에서 lookbackRight 만큼 좌측.")
Pine Script® indicator
by Donggrimon
Monthly DI+ & RSI StrategyOverview This strategy is designed to capture significant trend reversals and continuations on the Monthly timeframe. It combines the trend-following capability of the Directional Movement Index (DMI) with the fast momentum detection of RSI (Period 6). Core Logic The strategy triggers a long position based on a dual-confirmation system. It looks for a specific "handshake" between Trend (DI) and Momentum (RSI). Entry Conditions (OR Logic) A Buy signal is generated if EITHER of the following occurs: Trend Trigger: DI+ crosses over DI- (while RSI is already bullish, trading above its SMA). Momentum Trigger: RSI(6) crosses over RSI SMA(14) (while the trend is already bullish, with DI+ > DI-). Exit Condition (Stop Loss) Trend Reversal: The position is closed immediately if DI- crosses over DI+, indicating the bullish trend has been invalidated. Default Settings Timeframe: Optimized for 1M (Monthly) charts. RSI: Length 6 RSI SMA: Length 14 DMI: Length 14 / Smoothing 14 Risk Warning This script is for educational purposes only. Past performance does not guarantee future results. Always backtest on your specific asset classes before trading.
Pine Script® strategy
by Ganamurthy
VR Volume Ratio + Divergence (Pro)成交量比率 (Volume Ratio, VR) 是一項通過分析股價上漲與下跌日的成交量，來研判市場資金氣氛的技術指標。本腳本基於傳統 VR 公式進行了優化，增加了**「趨勢變色」與「自動背離偵測」**功能，幫助交易者更精準地捕捉量價轉折點。 Introduction Volume Ratio (VR) is a technical indicator that measures the strength of a trend by comparing the volume on up-days versus down-days. This script enhances the classic VR formula with "Trend Color Coding" and "Auto-Divergence Detection", helping traders identify volume-price reversals more accurately. 核心功能與參數 公式原理： VR = (Qu + Qf/2) / (Qd + Qf/2) * 100 Qu: 上漲日成交量 (Up volume) Qd: 下跌日成交量 (Down volume) Qf: 平盤日成交量 (Flat volume) 參數 (Length)：預設為 26 日，這是市場公認最有效的短中線參數。 關鍵水位線 (Key Levels)： < 40% (底部區)：量縮極致，市場情緒冰點，常對應股價底部，適合尋找買點。 100% (中軸)：多空分界線。 > 260% (多頭警戒)：進入強勢多頭行情，但需注意過熱。 > 450% (頭部區)：成交量過大，市場情緒亢奮，通常為頭部訊號。 視覺優化 (Visuals)： 紅漲綠跌：當 VR 數值大於前一日顯示為紅色（動能增強）；小於前一日顯示為綠色（動能退潮）。 背離訊號 (Divergence)：自動標記量價背離。 ▲ 底背離 (Bullish)：股價創新低，但 VR 指標墊高（主力吸籌）。 ▼ 頂背離 (Bearish)：股價創新高，但 VR 指標走弱（買氣衰竭）。 Features & Settings Formula Logic: Calculated as VR = (Qu + Qf/2) / (Qd + Qf/2) * 100. Default Length: 26, widely regarded as the optimal setting for short-to-medium term analysis. Key Zones: < 40% (Oversold/Bottom): Extreme low volume, often indicating a market bottom and potential buying opportunity. 100% (Neutral): The balance point between bulls and bears. > 260% (Bullish Zone): Strong uptrend, volume is expanding. > 450% (Overbought/Top): Extreme high volume, often indicating a market top and potential reversal. Visual Enhancements: Color Coding: Line turns Red when VR rises (Momentum Up) and Green when VR falls (Momentum Down). Divergence Signals: Automatically marks divergence points on the chart. ▲ Bullish Divergence: Price makes a lower low, but VR makes a higher low (Accumulation). ▼ Bearish Divergence: Price makes a higher high, but VR makes a lower high (Distribution). 應用策略建議 抄底策略：當 VR 跌破 40% 後，指標線由綠翻紅，或出現「▲底背離」訊號時，為極佳的波段進場點。 逃頂策略：當 VR 衝過 450% 進入高檔區，一旦指標線由紅翻綠，或出現「▼頂背離」訊號時，建議分批獲利了結。 Strategy Guide Bottom Fishing: Look for entries when VR drops below 40% and turns red, or when a "▲ Bullish Divergence" label appears. Taking Profit: Consider selling when VR exceeds 450% and turns green, or when a "▼ Bearish Divergence" label appears. Disclaimer: This tool is for informational purposes only and does not constitute financial advice. / 本腳本僅供參考，不構成投資建議。
Pine Script® indicator
by jumbozip
RSI Divergence LiquidityRSI Divergence Liquidity is an indicator designed to help you catch high-probability BUY reversals by combining two powerful concepts: OANDA:XAUUSD Liquidity Sweep / Swing Low: automatically marks swing-low levels and tracks when price sweeps below them and reacts back. Bullish RSI Divergence: filters noise by comparing RSI at the swing area versus RSI at the retest, favoring reversals with stronger momentum confirmation. How it works The script draws Swing Low lines using Pivot Lows. When a new Swing Low forms, the previous one is cut/frozen . When price retests a Swing Low and the candle conditions are met (bar n bullish, bar n-1 bearish), the script checks: Whether RSI at n/n-1 is higher than the RSI at the swing (bullish divergence logic) Whether min RSI at the swing is below a threshold (default < 36) to focus on oversold swing areas If all conditions pass, the indicator prints an upward triangle right when bar n closes → a potential BUY signal. How to use Enter BUY when an up triangle appears at/near the Swing Low (liquidity sweep zone). Stop Loss idea: below the most recent swing low / below the sweep wick. Take Profit idea: nearest supply zone, prior high, or fixed RR such as 1:2 / 1:3 depending on your system. Recommended settings Best on: M5–H1 (depending on your style), especially effective when price is trending down and performs a clear sweep. For stricter filtering: lower Max minRSI at Swing (x) to only take signals from deeper RSI lows. Smaller Pivot Lookback → more swings/signals; larger values → fewer but cleaner swings. Note: This tool improves probability, not certainty. Combine it with market structure / key levels and proper risk management for best results.
Pine Script® indicator
by StrategyLAB_
6
1 CMO200 Signals.Multiple Instrument ScreenerDescription CMO200 Signals is an overlay indicator that combines a volume-based breakout signal system with multi-timeframe Support/Resistance levels and a 30-symbol screener table. What it does: Plots volume-driven BUY/SELL labels on the chart using three lookback presets: 200 / 388 / 500. Builds higher-timeframe Support & Resistance lines using RSI + CMO conditions and pivot logic (configurable S/R timeframe). Shows a multi-instrument screener table (up to 30 symbols) with each symbol’s RSI, current BUY/SELL status, last signal price, and trend bias vs MA 200 / MA 111 / MA 89. Includes alerts for: BUY/SELL (200 lookback) and price crossing above/below MA200. Inputs: RSI length, lookback settings, Less Ratio filter, S/R timeframe, and symbol enable toggles. Disclaimer: This script is for educational/informational purposes only and is not financial advice. Always use proper risk management and confirm signals with additional analysis.
Pine Script® indicator
by sahanyalcin78
ULTIMATE AI SYSTEM [PRO MAX 2025 - NEUTRAL FIXED]🚀 Overview The ULTIMATE AI SYSTEM is a next-generation trading toolkit designed to identify high-probability reversal setups within established trends. This Parallel Edition introduces a dynamic Linear Regression Channel combined with a powerful Multi-Divergence Engine capable of scanning 14 different oscillators simultaneously. 🔥 Key Features 1. Parallel Linear Regression Channel This is the core of the trend filtering system. Unlike standard regression channels: • Parallel Bands: The upper and lower bands are perfectly parallel to the baseline, calculated using Standard Deviation (Deviation 2.0 default). • Dynamic Trend Coloring: The channel automatically changes color based on the slope: • 🟢 Green: Uptrend (Bullish Bias) • 🔴 Red: Downtrend (Bearish Bias) • Mean Reversion Logic: It helps filter out trades that are over-extended (e.g., buying at the top of the channel). 2. AI Multi-Divergence Engine The script scans 14 Indicators simultaneously across Fibonacci Lookback Periods (5, 8, 13, 21 candles) to find hidden momentum shifts. • Indicators Scanned: RSI, CCI, MACD, OBV, MFI, MOM, STOCH, CMF, ADX, ATR, WPR, ROC, TSI. • Algorithm: A signal is only triggered if a user-defined minimum number of indicators (default: 4) show divergence at the same time. 3. Smart Filtering Layer To reduce false signals, every trade must pass 5 layers of confirmation: 1. Trend Filter: Price must be above/below the EMA 200 (optional). 2. Regression Filter: Buy signals are validated only if price is within the safe zone of the Linear Regression Channel. 3. RSI Guard: Prevents buying in Overbought or selling in Oversold conditions (optimized 75/25 levels). 4. Candle Validation: Buys require a Green candle; Sells require a Red candle. 5. Lookback Confirmation: Uses Fibonacci sequences to validate divergence strength. 4. Pro Dashboard A real-time table on the chart displays: • Current value of all oscillators. • Live Divergence status (▲ for Bullish, ▼ for Bearish). • Overall Market Sentiment score. 🛠 How It Works • LONG (BUY) Signal: 1. Market Sentiment is Bullish (Minimum 4 indicators showing bullish divergence). 2. Price is above EMA 200 (Trend Confirmation). 3. Linear Regression Slope is Positive (or price is at the channel bottom). 4. RSI is below 75 (Not Overbought). 5. Candle closes Green. • SHORT (SELL) Signal: 1. Market Sentiment is Bearish (Minimum 4 indicators showing bearish divergence). 2. Price is below EMA 200 (Trend Confirmation). 3. Linear Regression Slope is Negative (or price is at the channel top). 4. RSI is above 25 (Not Oversold). 5. Candle closes Red. ⚙️ Settings • Min Confirmations: Number of indicators required to trigger a signal (Default: 4). • Regression Length: Length for the Linear Regression Channel (Default: 100). • Channel Deviation: Width of the parallel channel (Default: 2.0). • EMA Filter: Toggle EMA 200 filtering On/Off. • Lookback Periods: Customizable Fibonacci sequence for divergence detection. ⚠️ Disclaimer This script is for educational and analytical purposes only. No indicator guarantees 100% accuracy. Always use proper risk management and combine signals with your own price action analysis. Code Author: Version: PRO MAX 2025 - PARALLEL EDITION
Pine Script® indicator
by maryammohseni703
BTC - ALSI: Altcoin Season Index (Dynamic Eras)Title: BTC - ALSI: Altcoin Season Index (Dynamic Eras) Overview & Philosophy The Altcoin Season Index (ALSI) is a quantitative tool designed to answer the most critical question in crypto capital rotation: "Is it time to hold Bitcoin, or is it time to take risks on Altcoins?" Most "Altseason" indicators suffer from Survivor Bias or Obsolescence. They either track a static list of coins that includes "dead" assets from previous cycles (ghosts of 2017), or they break completely when major tokens collapse (like LUNA or FTT). This indicator solves this by using a Time-Varying Basket. The indicator automatically adjusts its reference list of Top 20 coins based on historical eras. This ensures the index tracks the winners of the moment—capturing the DeFi summer of 2020, the NFT craze of 2021, and the AI/Meme narratives of 2024/2025. Methodology The indicator calculates the percentage of the Top 20 Altcoins that are outperforming Bitcoin over a rolling window (Default: 90 Days). The "Win" Count: For every major Altcoin performing better than BTC, the index adds a point. Dynamic Eras: The basket of coins changes depending on the date: 2020 Era (DeFi Summer): Tracks the "Blue Chips" of the DeFi revolution like UNI, LINK, DOT, and early movers like VET and FIL. 2021 Era (Layer 1 Wars): Tracks the explosion of alternative smart contract platforms, adding winners like SOL, AVAX, MATIC, and ALGO. 2022 Era (The Survivors): Filters for resilience during the Bear Market, solidifying the status of established assets like SHIB and ATOM. 2023 Era (Infrastructure & Scale): Captures the rise of "Next-Gen" tech leading into the pre-halving year, introducing TON, APT (Aptos), and ARB (Arbitrum). 2024/25 Era (AI & Speed): Tracks the current Super-Cycle leaders, focusing on the AI narrative (TAO, RNDR), High-Performance L1s (SUI), and modern Memes (PEPE). Chart Analysis & Strategy ( The "Alpha" ) As seen in the chart above, there is a strong correlation between ALSI Peaks and local tops in TOTAL3 (The Crypto Market Cap excluding BTC & ETH). The Entry (Rotation): When the indicator rises above the neutral 50 line, it signals that capital is beginning to rotate out of Bitcoin and into Altcoins. This has historically been a strong confirmation signal to increase exposure to high-beta assets. The Exit (Saturation): When the indicator hits 100 (or sustains in the Red Zone > 75), it means every single Altcoin is beating Bitcoin. Historically, this extreme exuberance often marks a local top in the TOTAL3 chart. This is the zone where smart money typically sells into strength, rather than opening new positions. How to Read the Visuals 🚀 Altcoin Season (Red Zone > 75): Strong Altcoin dominance. The market is "Risk On." 🛡️ Bitcoin Season (Blue Zone < 25): Bitcoin dominance. Alts are bleeding against BTC. Historically, this is a defensive zone to hold BTC or Stablecoins. Data Dashboard: A status table in the bottom-right corner displays the live Index Value, current Regime, and a System Check to ensure all 20 data feeds are active. Settings Lookback Period: Default 90 Days. Lowering this (e.g., to 30) makes the index faster but noisier. Thresholds: Adjustable zones for Altcoin Season (Default: 75) and Bitcoin Season (Default: 25). Credits & Attribution This open-source indicator is built on the shoulders of giants. I acknowledge the original creators of the concept and the pioneers of its implementation on TradingView: Original Concept: BlockchainCenter.net. - They established the industry standard definition: 75% of the Top 50 coins outperforming Bitcoin over 90 days = Altseason.. TradingView Implementation: Adam_Nguyen - He implemented the "Dynamic Era" logic (updating the coin list annually) on TradingView. Our code structure for the time-based switching is inspired by his methodology. See also his implementation in the chart. ( Altcoin Season Index - Adam) . Comparison: Why use ALSI | RM? While inspired by the above, ALSI introduces three key improvements: Open Source: Unlike other popular TradingView versions (which are closed-source), this script is fully transparent. You can see exactly which coins are triggering the signal. Sanitized History (Anti-Fragile): Historical Top 20 snapshots are not blindly used. "Dead" coins (like LUNA and FTT) from previous eras are manually filtered out. A raw index would crash during the Terra/FTX collapses, giving a false "Bitcoin Season" signal purely due to bad actors. The curated list preserves the integrity of the market structure signal. Narrative Relevance: The 2024/25 basket was updated to include TAO (Bittensor) and RNDR, ensuring the index captures the dominant AI narrative, rather than tracking fading assets from the previous cycle. You can compare the ALSI indicator with other available tradingview indicators in the chart: Different indicators for the same idea are shown in the 3 Pane window below the BTC and Total3 chart, whereas ALSI is the top pane indicator. Important Note on Coin Selection Baskets are highly curated: Dead/irrelevant coins (FTT, LUNA, BSV) are excluded for clean signals. This prevents historical breaks and ensures Era T5 captures current narratives (AI, Memes) via TAO/RNDR. See above. Users are free to adjust the source code to test their own baskets. Disclaimer This script is for research and educational purposes only. Past correlations between ALSI and TOTAL3 do not guarantee future results. Market regimes can change, and "Altseasons" can be cut short by macro events. Tags bitcoin, btc, altseason, dominance, total3, rotation, cycle, index, alsi, Rob Maths
Pine Script® indicator
by Rob_Maths
JessieOBS The Evil MACD for back testingJessieOBS – Reversal Early Warning Tool (Backtest Version) 1. Reversal Early Warning This indicator highlights areas with the highest probability of trend reversal using thick red and blue lines. Blue lines indicate a potential downward reversal Red lines indicate a potential upward reversal Instead of marking a single point, JessieOBS focuses on identifying high-probability reversal zones. 2. Sideways Market Filtering One major weakness of many traditional indicators is their inability to filter out sideways (range-bound) markets. JessieOBS is designed to address this issue: during consolidation phases, red and blue warning zones appear far less frequently, helping traders avoid low-quality signals and reduce noise. 3. Left-Side Signal for Advanced Analysis JessieOBS is a left-side indicator, meaning it provides early warnings before confirmation. Signals are often shown as a zone rather than a precise entry point. To refine entries, users are encouraged to combine JessieOBS with their own trading systems, such as: Divergence-based strategies Smart Money Concepts (SMC) analysis The Theory of Entanglement structures Different traders use different methods, and JessieOBS works as a powerful tool to enhance the accuracy and confidence of many analytical approaches. 4. Backtesting-Focused Version This version is specifically designed for historical analysis and backtesting. Recent data is intentionally hidden, while historical signals remain visible, making it suitable for building, evaluating, and refining trading systems. 5. Real-Time Signals For real-time trading signals, please refer to JessieOBS with MACD – The Evil MACD 3.0.
Pine Script® indicator
by KakarottoGoku
Rainbow MA Width█ OVERVIEW Rainbow MA Width is a companion indicator for Rainbow MA Cloud. It displays ribbon width as a normalized Z-Score, allowing traders to visualize trend momentum expansion and contraction relative to recent history. █ CONCEPTS Z-Score Normalization: Rather than displaying raw width values (which vary by asset and timeframe), this indicator normalizes the ribbon width using Z-Score calculation: Z-Score = (Current Width - Average Width) / Standard Deviation Z-Score Interpretation: • 0 = Average width (mean) • +1 to +2 = Expanding (above average, strong trend) • -1 to -2 = Contracting (below average, weakening trend) • Beyond ±2 = Extreme (statistical outlier, potential reversal) Width Calculation Modes: • Outer — Distance between fastest and slowest MA: |MA1 - MA8| • Average Gap — Mean of all adjacent MA gaps • Total Gap — Sum of all adjacent MA gaps █ FEATURES 1 — Width Mode Selection Three methods to calculate ribbon width. "Outer" recommended for aligned trends. 2 — Z-Score Period Configurable lookback for mean and standard deviation. Default 20 bars; increase for smoother, less reactive readings. 3 — Zone Fill Coloring Cyan fill when expanding (Z > 0). Orange fill when contracting (Z < 0). Yellow fill for extreme values (|Z| > 2) as warning. 4 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Synced with Rainbow MA Cloud for consistency. 5 — Reference Lines Horizontal lines at 0 (mean), ±1σ, and ±2σ levels. Provides clear visual boundaries for interpretation. 6 — Raw Width Display Optional secondary line showing original width percentage. Useful for comparing normalized vs absolute values. █ HOW TO USE Trend Confirmation: • Z-Score rising above 0 confirms trend acceleration • Z-Score staying above +1 indicates sustained strong momentum • Use alongside alignment background for confluence Reversal Warning: • Z-Score exceeding +2 suggests overextension (yellow warning zone) • Z-Score dropping below -2 indicates extreme contraction • Extreme readings often precede trend reversals or consolidation Entry Timing: • Enter trends when Z-Score crosses above 0 (expansion beginning) • Avoid entries when Z-Score is at extreme highs (potential exhaustion) • Consider exits when Z-Score peaks and begins declining █ LIMITATIONS • Z-Score is relative to lookback period; different periods give different readings • Extreme zones (±2) are statistical guides, not guarantees • Best used in conjunction with Rainbow MA Cloud for full context █ ALERTS Four built-in alert conditions: • Z-Score crosses above/below zero • Z-Score enters extreme high/low zones (±2)
Pine Script® indicator
by viva_lee
JAM ALGO Signals "Remove the filters to view signals, then customize the parameters to your preference and enjoy using the indicator!" ✅ JAM ALGO Signals Description: 🚀 Advanced Trading Signals with Risk Management & Alerts This indicator is a complete all-in-one tool for traders seeking precise entries and exits with built-in risk management and real-time statistics. It combines RSI and EMA-based analysis, projected Take Profit (TP) and Stop Loss (SL) levels, customizable filters, and premium alerts directly on your TradingView chart. ✨ Key Features: Entry Signals 🔹 Buy & Sell signals based on price action and RSI conditions. Trend confirmation via EMA (200 and optional 50-period filters). Visual signals: Labels, Arrows, Triangles, or Text. Risk Management (RR) ⚖️ Define Stop Loss (SL) and multiple Take Profit levels (TP1, TP2, TP3) based on risk ratio (R). Configurable projection bars to visualize target levels. Colored zones for TP & SL, with optional borders for clarity. Premium Alerts 🔔 Alerts for BUY / SELL signals, TP1 / TP2 / TP3, and SL hits. Instant notifications when levels are reached. Advanced Filters 🛡️ EMA50 Trend Filter: confirms short-term trend. RSI Direction Filter: ensures momentum alignment. Volatility Filter (ATR14 > Range): ensures enough market movement. Candle Size Filter: avoids entries on too small candles. SL Overlap Filter: prevents trades overlapping existing SL levels. Real-Time Statistics 📊 Total trades, wins (TP1), and losses (SL). Winrate (%), cumulative profit, and average RR ratio. Optimizes strategy tracking directly on the chart. Customizable Visuals 🎨 TP & SL line colors and styles (solid, dashed, dotted). Fully adjustable signal labels (color, size, type). Configurable stats table with background & text colors. 🔥 Advantages: Complete tool for day trading and swing trading. Clear visualization of critical risk/reward levels. Automatic alerts for fast reaction without constant monitoring. Integrated statistics for performance evaluation and strategy improvement. Recommended for: Traders using price action, intraday strategies, scalping, or swing trading, who want advanced risk management with visual signals and performance analytics on TradingView.
Pine Script® indicator
by juanmr888
RRG 1 stockThis Pine Script combines Relative Rotation Graph (RRG) analysis with Supertrend-based trend confirmation to identify momentum shifts and potential trade entries in a single stock relative to a benchmark (e.g., NIFTY). Here’s a detailed description you can use: Description – RRG + Supertrend Indicator (1 Stock) The RRG 1 Stock indicator blends relative strength analysis with trend-following confirmation to help traders pinpoint when a stock is outperforming or underperforming its benchmark and to align entries with trend direction. Core logic: Benchmark-relative strength (RS-Ratio and RS-Momentum): Calculates relative strength (RS) of the selected stock versus a benchmark (default: NIFTY). Applies double smoothed Weighted Moving Averages (WMA) to derive normalized RS-Ratio and RS-Momentum, similar to Julius de Kempenaer’s RRG framework. Classifies each bar into one of four RRG quadrants: Leading – strong and improving relative performance Weakening – losing momentum after leadership Lagging – underperforming the benchmark Improving – rebounding from underperformance The chart background color dynamically reflects the current quadrant. Supertrend filters (Trend confirmation): Uses two Supertrend overlays with different multipliers (Factor1, Factor2) to judge trend strength. Potential long setups occur when the stock is in the Leading quadrant and price is above both Supertrends. Potential short setups occur when in the Lagging quadrant and price lies below both Supertrends. Velocity and momentum signals: Measures RRG “velocity” — the speed of movement across the RS-Ratio/RS-Momentum plane. Flags unusually strong rotations (high velocity) with a diamond marker when momentum accelerates. Statistical bands & entry modes: Standard-deviation bands on RS-Ratio (±2σ by default) can be used for mean-reversion entries if you select STDDEV mode instead of QUADRANT. Shows fast RS moving average (9-period) as a smoother for momentum confirmation. Custom time markers: You can define a specific date (day, month, year) to analyze RRG values at that time and display the difference in bar count since that point. Visualization: Plots RS-Ratio (green) and RS-Momentum (blue) with a 100 baseline. Benchmark and stock closing prices appear in the status line. Chart background colors shift to reflect RRG quadrant and trend direction. Usage: Ideal for relative strength rotation analysis or as a systematic entry trigger in momentum-based strategies. It helps confirm trend continuation or reversals based on both relative momentum and technical trend strength.
Pine Script® indicator
by deepaknesarikar
Dual Momentum Confluence Oscillator MACD + RSIThis indicator is built around the **simultaneous use of two complementary momentum perspectives**, designed to be read **together**, not in isolation. ### Core purpose * Highlight moments where **momentum agreement** or **momentum imbalance** becomes visually evident. * Help distinguish between **healthy movement**, **loss of strength**, and **potential transition phases**. ### Combined reading approach * One component focuses on **momentum flow and acceleration**, showing how force develops or fades. * The other evaluates **relative pressure within recent price action**, adding context to whether momentum is stretched or still balanced. * Signals are meant to be interpreted when **both perspectives are considered at the same time**, reinforcing or filtering each other. ### Practical use * Particularly useful as a **confirmation layer** for directional strategies. * Helps avoid decisions based on a single momentum measure by requiring **contextual alignment**. * Can also support timing refinement in both continuation and pullback scenarios. ### Visual structure * Everything is displayed in **one compact pane**, allowing quick cross-market scanning without overloading the chart. * Visual contrast makes changes in momentum state easy to spot at a glance. ### Best conditions * Most effective in markets with **clear participation and readable momentum shifts**. * Less informative during flat, low-energy phases. *For educational and analytical purposes only. Always test across multiple markets and timeframes.* --- Così è chiaro che **RSI e MACD lavorano insieme**, ma **nessuno può risalire a come**.
Pine Script® indicator
by alblanz
Kinetic RSI [Vel + Accel] + AlertsThe Problem with Standard RSI Most traders use the Relative Strength Index (RSI) to see if a market is "Overbought" (above 70) or "Oversold" (below 30). The problem? A strong trend can stay overbought for days, burning short sellers, or an asset can stay oversold while price continues to crash. Standard RSI tells you where the price is, but it doesn't tell you how hard it is moving. ​The Solution: Kinetic RSI This script reimagines RSI by applying basic physics concepts: Velocity and Acceleration. Instead of asking "Is RSI below 30?", this indicator asks: "Is RSI below 35 AND did it just make a violent, high-speed turn upwards?" ​It filters out lazy, drifting price action and only signals when momentum is accelerating in a new direction. ​How It Works (The Math) ​Velocity: We calculate the speed of the RSI change (Current RSI - Previous RSI). ​Acceleration: We calculate if that speed is increasing (Current Velocity - Previous Velocity). ​The Trigger: A signal is only generated if the RSI is in an extreme zone (<35 or >65) AND it has high Velocity AND positive Acceleration. ​How to Trade It ​1. The "Kick" Signals (Background Highlights) ​🟢 Green Background (Bullish Kick): The RSI was low, but buyers stepped in aggressively. The momentum is not just positive; it is accelerating upward. This is often a "V-Bottom" catch. ​🔴 Red Background (Bearish Kick): The RSI was high, but sellers slammed the price down. Momentum is accelerating downward. ​2. The Line Color ​Lime Line: Velocity is positive (Momentum is rising). ​Fuchsia Line: Velocity is negative (Momentum is falling). ​Usage: If the background flashes Green (Buy Signal), but the line turns back to Fuchsia (Red) a few bars later, the move has failed—exit the trade. ​Settings & Alerts ​RSI Length: Standard 14 (Adjustable). ​Velocity Threshold: Controls sensitivity. ​Lower (e.g., 2-3): More signals, catches smaller reversals. ​Higher (e.g., 5+): Fewer signals, catches only massive "shocks" to the price. ​Alerts Included: You can set alerts for "Bullish Kick," "Bearish Kick," or "Any Kick" to get notified of volatility spikes. ​Best Practices ​Wait for the Close: This indicator measures the closing velocity. Always wait for the bar to close to confirm the background color signal. ​Trend Filtering: This works best as a "Reversal" indicator. If the market is in a super-strong uptrend, ignore the Bearish (Red) signals and only take the Bullish (Green) dips.
Pine Script® indicator
by MonkeyPhone
Trading Asset Comparison Oscillator by thedatalayers.comThe Trading Asset Comparison Oscillator compares the currently opened asset with a user-selected reference symbol to identify periods of relative overvaluation and undervaluation. The concept is based on the idea that markets constantly seek fair value. When an asset becomes mispriced relative to a meaningful benchmark, it often moves back toward equilibrium. This indicator measures that relationship and transforms it into an easy-to-read oscillator: • Green Zone (Undervalued) - The selected asset is undervalued compared to the reference symbol. This reflects potential upward pressure as markets tend to correct undervaluation over time. • Red Zone (Overvalued) - The asset is overvalued relative to the reference symbol. This may indicate a higher likelihood of downward movement as price seeks rebalancing. Users can set any reference instrument they consider relevant-commodities, indices, currency pairs, or other assets. The oscillator quantifies the valuation difference based on a configurable cycle length. The recommended setting is Cycle = 10, which provides a balanced and responsive signal structure. Since this indicator relies on broader valuation dynamics, it is designed to be used exclusively on the daily timeframe. Lower timeframes may not reflect true fundamental value relationships. The Asset Comparison Oscillator helps traders identify when an asset appears cheap or expensive relative to another, offering an additional layer of fundamental context to support directional trading decisions.
Pine Script® indicator
by TheDataLayers