Get started

Prediction

Probability Grid [LuxAlgo]The Probability Grid tool allows traders to see the probability of where and when the next reversal would occur, it displays a 10x10 grid and/or dashboard with the probability of the next reversal occurring beyond each cell or within each cell. 🔶 USAGE By default, the tool displays deciles (percentiles from 0 to 90), users can enable, disable and modify each percentile, but two of them must always be enabled or the tool will display an error message alerting of it. The use of the tool is quite simple, as shown in the chart above, the further the price moves on the grid, the higher the probability of a reversal. In this case, the reversal took place on the cell with a probability of 9%, which means that there is a probability of 91% within the square defined by the last reversal and this cell. 🔹 Grid vs Dashboard The tool can display a grid starting from the last reversal and/or a dashboard at three predefined locations, as shown in the chart above. 🔶 DETAILS 🔹 Raw Data vs Normalized Data By default the tool displays the normalized data, this means that instead of using the raw data (price delta between reversals) it uses the returns between each reversal, this is useful to make an apples to apples comparison of all the data in the dataset. This can be seen in the left side of the chart above (BTCUSD Daily chart) where normalize data is disabled, the percentiles from 0 to 40 overlap and are indistinguishable from each other because the tool uses the raw price delta over the entire bitcoin history, with normalize data enabled as we can see in the right side of the chart we can have a fair comparison of the data over the entire history. 🔹 Probability Beyond or Within Each Cell Two different probability modes are available, the default mode is Probability Beyond Each Cell, the number displayed in each cell is the probability of the next reversal to be located in the area beyond the cell, for example, if the cell displays 20%, it means that in the area formed by the square starting from the last reversal and ending at the cell, there is an 80% probability and outside that square there is a 20% probability for the location of the next reversal. The second probability mode is the probability within each cell, this outlines the chance that the next reversal will be within the cell, as we can see on the right chart above, when using deciles as percentiles (default settings), each cell has the same 1% probability for the 10x10 grid. 🔶 SETTINGS Swing Length: The maximum length in bars used to identify a swing Maximum Reversals: Maximum number of reversals included in calculations Normalize Data: Use returns between swings instead of raw price Probability: Choose between two different probability modes: beyond and inside each cell Percentiles: Enable/disable each of the ten percentiles and select the percentile number and line style 🔹 Dashboard Show Dashboard: Enable or disable the dashboard Position: Choose dashboard location Size: Choose dashboard size 🔹 Style Show Grid: Enable or disable the grid Size: Choose grid text size Colors: Choose grid background colors Show Marks: Enable/disable reversal markers
Pine Script® indicator
by LuxAlgo
13
Bitcoin Polynomial Regression ModelThis is the main version of the script. Click here for the Oscillator part of the script. 💡Why this model was created: One of the key issues with most existing models, including our own Bitcoin Log Growth Curve Model , is that they often fail to realistically account for diminishing returns. As a result, they may present overly optimistic bull cycle targets (hence, we introduced alternative settings in our previous Bitcoin Log Growth Curve Model). This new model however, has been built from the ground up with a primary focus on incorporating the principle of diminishing returns. It directly responds to this concept, which has been briefly explored here . 📉The theory of diminishing returns: This theory suggests that as each four-year market cycle unfolds, volatility gradually decreases, leading to more tempered price movements. It also implies that the price increase from one cycle peak to the next will decrease over time as the asset matures. The same pattern applies to cycle lows and the relationship between tops and bottoms. In essence, these price movements are interconnected and should generally follow a consistent pattern. We believe this model provides a more realistic outlook on bull and bear market cycles. To better understand this theory, the relationships between cycle tops and bottoms are outlined below:https://www.tradingview.com/x/7Hldzsf2/ 🔧Creation of the model: For those interested in how this model was created, the process is explained here. Otherwise, feel free to skip this section. This model is based on two separate cubic polynomial regression lines. One for the top price trend and another for the bottom. Both follow the general cubic polynomial function: ax^3 +bx^2 + cx + d. In this equation, x represents the weekly bar index minus an offset, while a, b, c, and d are determined through polynomial regression analysis. The input (x, y) values used for the polynomial regression analysis are as follows: Top regression line (x, y) values: 113, 18.6 240, 1004 451, 19128 655, 65502 Bottom regression line (x, y) values: 103, 2.5 267, 211 471, 3193 676, 16255 The values above correspond to historical Bitcoin cycle tops and bottoms, where x is the weekly bar index and y is the weekly closing price of Bitcoin. The best fit is determined using metrics such as R-squared values, residual error analysis, and visual inspection. While the exact details of this evaluation are beyond the scope of this post, the following optimal parameters were found: Top regression line parameter values: a: 0.000202798 b: 0.0872922 c: -30.88805 d: 1827.14113 Bottom regression line parameter values: a: 0.000138314 b: -0.0768236 c: 13.90555 d: -765.8892 📊Polynomial Regression Oscillator: This publication also includes the oscillator version of the this model which is displayed at the bottom of the screen. The oscillator applies a logarithmic transformation to the price and the regression lines using the formula log10(x) . The log-transformed price is then normalized using min-max normalization relative to the log-transformed top and bottom regression line with the formula: normalized price = log(close) - log(bottom regression line) / log(top regression line) - log(bottom regression line) This transformation results in a price value between 0 and 1 between both the regression lines. The Oscillator version can be found here. 🔍Interpretation of the Model: In general, the red area represents a caution zone, as historically, the price has often been near its cycle market top within this range. On the other hand, the green area is considered an area of opportunity, as historically, it has corresponded to the market bottom. The top regression line serves as a signal for the absolute market cycle peak, while the bottom regression line indicates the absolute market cycle bottom. Additionally, this model provides a predicted range for Bitcoin's future price movements, which can be used to make extrapolated predictions. We will explore this further below. 🔮Future Predictions: Finally, let's discuss what this model actually predicts for the potential upcoming market cycle top and the corresponding market cycle bottom. In our previous post here , a cycle interval analysis was performed to predict a likely time window for the next cycle top and bottom: In the image, it is predicted that the next top-to-top cycle interval will be 208 weeks, which translates to November 3rd, 2025. It is also predicted that the bottom-to-top cycle interval will be 152 weeks, which corresponds to October 13th, 2025. On the macro level, these two dates align quite well. For our prediction, we take the average of these two dates: October 24th 2025. This will be our target date for the bull cycle top. Now, let's do the same for the upcoming cycle bottom. The bottom-to-bottom cycle interval is predicted to be 205 weeks, which translates to October 19th, 2026, and the top-to-bottom cycle interval is predicted to be 259 weeks, which corresponds to October 26th, 2026. We then take the average of these two dates, predicting a bear cycle bottom date target of October 19th, 2026. Now that we have our predicted top and bottom cycle date targets, we can simply reference these two dates to our model, giving us the Bitcoin top price prediction in the range of 152,000 in Q4 2025 and a subsequent bottom price prediction in the range of 46,500 in Q4 2026. For those interested in understanding what this specifically means for the predicted diminishing return top and bottom cycle values, the image below displays these predicted values. The new values are highlighted in yellow: And of course, keep in mind that these targets are just rough estimates. While we've done our best to estimate these targets through a data-driven approach, markets will always remain unpredictable in nature. What are your targets? Feel free to share them in the comment section below.
Pine Script® indicator
by Cryptonerds
1
Bitcoin Polynomial Regression OscillatorThis is the oscillator version of the script. Click here for the other part of the script. 💡Why this model was created: One of the key issues with most existing models, including our own Bitcoin Log Growth Curve Model , is that they often fail to realistically account for diminishing returns. As a result, they may present overly optimistic bull cycle targets (hence, we introduced alternative settings in our previous Bitcoin Log Growth Curve Model). This new model however, has been built from the ground up with a primary focus on incorporating the principle of diminishing returns. It directly responds to this concept, which has been briefly explored here . 📉The theory of diminishing returns: This theory suggests that as each four-year market cycle unfolds, volatility gradually decreases, leading to more tempered price movements. It also implies that the price increase from one cycle peak to the next will decrease over time as the asset matures. The same pattern applies to cycle lows and the relationship between tops and bottoms. In essence, these price movements are interconnected and should generally follow a consistent pattern. We believe this model provides a more realistic outlook on bull and bear market cycles. To better understand this theory, the relationships between cycle tops and bottoms are outlined below:https://www.tradingview.com/x/7Hldzsf2/ 🔧Creation of the model: For those interested in how this model was created, the process is explained here. Otherwise, feel free to skip this section. This model is based on two separate cubic polynomial regression lines. One for the top price trend and another for the bottom. Both follow the general cubic polynomial function: ax^3 +bx^2 + cx + d. In this equation, x represents the weekly bar index minus an offset, while a, b, c, and d are determined through polynomial regression analysis. The input (x, y) values used for the polynomial regression analysis are as follows: Top regression line (x, y) values: 113, 18.6 240, 1004 451, 19128 655, 65502 Bottom regression line (x, y) values: 103, 2.5 267, 211 471, 3193 676, 16255 The values above correspond to historical Bitcoin cycle tops and bottoms, where x is the weekly bar index and y is the weekly closing price of Bitcoin. The best fit is determined using metrics such as R-squared values, residual error analysis, and visual inspection. While the exact details of this evaluation are beyond the scope of this post, the following optimal parameters were found: Top regression line parameter values: a: 0.000202798 b: 0.0872922 c: -30.88805 d: 1827.14113 Bottom regression line parameter values: a: 0.000138314 b: -0.0768236 c: 13.90555 d: -765.8892 📊Polynomial Regression Oscillator: This publication also includes the oscillator version of the this model which is displayed at the bottom of the screen. The oscillator applies a logarithmic transformation to the price and the regression lines using the formula log10(x) . The log-transformed price is then normalized using min-max normalization relative to the log-transformed top and bottom regression line with the formula: normalized price = log(close) - log(bottom regression line) / log(top regression line) - log(bottom regression line) This transformation results in a price value between 0 and 1 between both the regression lines. 🔍Interpretation of the Model: In general, the red area represents a caution zone, as historically, the price has often been near its cycle market top within this range. On the other hand, the green area is considered an area of opportunity, as historically, it has corresponded to the market bottom. The top regression line serves as a signal for the absolute market cycle peak, while the bottom regression line indicates the absolute market cycle bottom. Additionally, this model provides a predicted range for Bitcoin's future price movements, which can be used to make extrapolated predictions. We will explore this further below. 🔮Future Predictions: Finally, let's discuss what this model actually predicts for the potential upcoming market cycle top and the corresponding market cycle bottom. In our previous post here , a cycle interval analysis was performed to predict a likely time window for the next cycle top and bottom: In the image, it is predicted that the next top-to-top cycle interval will be 208 weeks, which translates to November 3rd, 2025. It is also predicted that the bottom-to-top cycle interval will be 152 weeks, which corresponds to October 13th, 2025. On the macro level, these two dates align quite well. For our prediction, we take the average of these two dates: October 24th 2025. This will be our target date for the bull cycle top. Now, let's do the same for the upcoming cycle bottom. The bottom-to-bottom cycle interval is predicted to be 205 weeks, which translates to October 19th, 2026, and the top-to-bottom cycle interval is predicted to be 259 weeks, which corresponds to October 26th, 2026. We then take the average of these two dates, predicting a bear cycle bottom date target of October 19th, 2026. Now that we have our predicted top and bottom cycle date targets, we can simply reference these two dates to our model, giving us the Bitcoin top price prediction in the range of 152,000 in Q4 2025 and a subsequent bottom price prediction in the range of 46,500 in Q4 2026. For those interested in understanding what this specifically means for the predicted diminishing return top and bottom cycle values, the image below displays these predicted values. The new values are highlighted in yellow: And of course, keep in mind that these targets are just rough estimates. While we've done our best to estimate these targets through a data-driven approach, markets will always remain unpredictable in nature. What are your targets? Feel free to share them in the comment section below.
Pine Script® indicator
by Cryptonerds
Bayesian TrendEnglish Description (primary) 1. Overview This script implements a Naive Bayesian classifier to estimate the probability of an upcoming bullish, bearish, or neutral move. It combines multiple indicators—RSI, MACD histogram, EMA price difference in ATR units, ATR level vs. its average, and Volume vs. its average—to calculate likelihoods for each market direction. Each indicator is “binned” (categorized into discrete zones) and assigned conditional probabilities for bullish/bearish/neutral scenarios. The script then normalizes these probabilities and paints bars in green if bullish is most likely, red if bearish is most likely, or blue if neutral is most likely. A small table is also displayed in the top-right corner of the chart, showing real-time probabilities. 2. How it works Indicator Calculations: The script calculates RSI, MACD (line and histogram), EMA, ATR, and Volume metrics. Binning: Each metric is converted into a discrete category (e.g., low, medium, high). For example, RSI < 30 is binned as “low,” while RSI > 70 is binned as “high.” Conditional Probabilities: User-defined tables specify the conditional probabilities of each bin under three hypotheses (Up, Down, Neutral). Naive Bayesian Formula: The script multiplies the relevant conditional probabilities, normalizes them, and derives the final probabilities (Up, Down, or Neutral). Visualization: Bar Colors: Bars are green when the Up probability exceeds 50%, red for Down, and blue otherwise. Table: Displays numeric probabilities of Up, Down, and Neutral in percentage terms. 3. How to use it Add the script to your chart. Observe the colored bars: Green suggests a higher probability for bullish movement. Red suggests a higher probability for bearish movement. Blue indicates a higher probability of sideways or uncertain conditions. Check the table in the top-right corner to see exact probabilities (Up/Down/Neutral). Use the input settings to adjust thresholds (RSI, MACD, Volume, etc.), define alert conditions (e.g., when Up probability crosses 50%), and decide whether to trigger alerts on bar close or in real-time. 4. Originality and usefulness Originality: This script uniquely applies a Naive Bayesian approach to a blend of classic and volume-based indicators. It demonstrates how different indicator “zones” can be combined to produce probabilistic insights. Usefulness: Traders can interpret the probability breakdown to gauge the script’s bias. Unlike single indicators, this approach synthesizes several signals, potentially offering a more holistic perspective on market conditions. 5. Limitations The conditional probabilities are manually assigned and may not reflect actual market behavior across all instruments or timeframes. Results depend on the user’s choice of thresholds and indicator settings. Like any indicator, past performance does not guarantee future results. Always confirm signals with additional analysis. 6. Disclaimer This script is intended for educational and informational purposes only. It does not constitute financial advice. Trading involves significant risk, and you should make decisions based on your own analysis. Neither the script’s author nor TradingView is liable for any financial losses. Русское описание (Russian translation, optional) Этот индикатор реализует наивный Байесовский классификатор для оценки вероятности предстоящего роста (Up), падения (Down) или бокового движения (Neutral). Он комбинирует несколько индикаторов—RSI, гистограмму MACD, разницу цены и EMA в единицах ATR, уровень ATR относительно своего среднего значения и объём относительно своего среднего—чтобы вычислить вероятности для каждого направления рынка. Каждый индикатор делится на «зоны» (low, mid, high), которым приписаны условные вероятности для бычьего/медвежьего/нейтрального исхода. Скрипт нормирует эти вероятности и раскрашивает бары в зелёный, красный или синий цвет в зависимости от того, какая вероятность выше. Также в правом верхнем углу отображается таблица с текущими значениями вероятностей.
Pine Script® indicator
by SuperStrategyINC
4
Market Cycles The Market Cycles indicator transforms market price data into a stochastic wave, offering a unique perspective on market cycles. The wave is bounded between positive and negative values, providing clear visual cues for potential bullish and bearish trends. When the wave turns green, it signals a bullish cycle, while red indicates a bearish cycle. Designed to show clarity and precision, this tool helps identify market momentum and cyclical behavior in an intuitive way. Ideal for fine-tuning entries or analyzing broader trends, this indicator aims to enhance the decision-making process with simplicity and elegance.
Pine Script® indicator
by Zoe-Yoshev-Bepisgat
Three Step Future-Trend [BigBeluga]Three Step Future-Trend by BigBeluga is a forward-looking trend analysis tool designed to project potential future price direction based on historical periods. This indicator aggregates data from three consecutive periods, using price averages and delta volume analysis to forecast trend movement and visualize it on the chart with a projected trend line and volume metrics. 🔵 Key Features: Three Period Analysis: Calculates price averages and delta volumes from three specified periods, creating a consolidated view of historical price movement. Future Trend Line Projection: Plots a forward trend line based on the calculated averag of three periods, helping traders visualize potential future price movement. Avg Delta Volume and Future Price Label: Shows a delta average Volume a long with a Future Price label at the end of the projected trend line, indicating the possible future delta volume and future Price. Volume Data Table: Displays a detailed table showing delta and total volume for each of the three periods, allowing quick volume comparison to support the projected trend. This indicator provides a dynamic way to anticipate market direction by blending price and volume data, giving traders insights into both volume and trend strength in upcoming periods.
Pine Script® indicator
by BigBeluga
22
High/Low Location Frequency [LuxAlgo]The High/Low Location Frequency tool provides users with probabilities of tops and bottoms at user-defined periods, along with advanced filters that offer deep and objective market information about the likelihood of a top or bottom in the market. 🔶 USAGE There are four different time periods that traders can select for analysis of probabilities: HOUR OF DAY: Probability of occurrence of top and bottom prices for each hour of the day DAY OF WEEK: Probability of occurrence of top and bottom prices for each day of the week DAY OF MONTH: Probability of occurrence of top and bottom prices for each day of the month MONTH OF YEAR: Probability of occurrence of top and bottom prices for each month The data is displayed as a dashboard, which users can position according to their preferences. The dashboard includes useful information in the header, such as the number of periods and the date from which the data is gathered. Additionally, users can enable active filters to customize their view. The probabilities are displayed in one, two, or three columns, depending on the number of elements. 🔹 Advanced Filters Advanced Filters allow traders to exclude specific data from the results. They can choose to use none or all filters simultaneously, inputting a list of numbers separated by spaces or commas. However, it is not possible to use both separators on the same filter. The tool is equipped with five advanced filters: HOURS OF DAY: The permitted range is from 0 to 23. DAYS OF WEEK: The permitted range is from 1 to 7. DAYS OF MONTH: The permitted range is from 1 to 31. MONTHS: The permitted range is from 1 to 12. YEARS: The permitted range is from 1000 to 2999. It should be noted that the DAYS OF WEEK advanced filter has been designed for use with tickers that trade every day, such as those trading in the crypto market. In such cases, the numbers displayed will range from 1 (Sunday) to 7 (Saturday). Conversely, for tickers that do not trade over the weekend, the numbers will range from 1 (Monday) to 5 (Friday). To illustrate the application of this filter, we will exclude results for Mondays and Tuesdays, the first five days of each month, January and February, and the years 2020, 2021, and 2022. Let us review the results: DAYS OF WEEK: `2,3` or `2 3` (for crypto) or `1,2` or `1 2` (for the rest) DAYS OF MONTH: `1,2,3,4,5` or `1 2 3 4 5` MONTHS: `1,2` or `1 2` YEARS: `2020,2021,2022` or `2020 2021 2022` 🔹 High Probability Lines The tool enables traders to identify the next period with the highest probability of a top (red) and/or bottom (green) on the chart, marked with two horizontal lines indicating the location of these periods. 🔹 Top/Bottom Labels and Periods Highlight The tool is capable of indicating on the chart the upper and lower limits of each selected period, as well as the commencement of each new period, thus providing traders with a convenient reference point. 🔶 SETTINGS Period: Select how many bars (hours, days, or months) will be used to gather data from, max value as default. Execution Window: Select how many bars (hours, days, or months) will be used to gather data from 🔹 Advanced Filters Hours of day: Filter which hours of the day are excluded from the data, it accepts a list of hours from 0 to 23 separated by commas or spaces, users can not mix commas or spaces as a separator, must choose one Days of week: Filter which days of the week are excluded from the data, it accepts a list of days from 1 to 5 for tickers not trading weekends, or from 1 to 7 for tickers trading all week, users can choose between commas or spaces as a separator, but can not mix them on the same filter. Days of month: Filter which days of the month are excluded from the data, it accepts a list of days from 1 to 31, users can choose between commas or spaces as separator, but can not mix them on the same filter. Months: Filter months to exclude from data. Accepts months from 1 to 12. Choose one separator: comma or space. Years: Filter years to exclude from data. Accepts years from 1000 to 2999. Choose one separator: comma or space. 🔹 Dashboard Dashboard Location: Select both the vertical and horizontal parameters for the desired location of the dashboard. Dashboard Size: Select size for dashboard. 🔹 Style High Probability Top Line: Enable/disable `High Probability Top` vertical line and choose color High Probability Bottom Line: Enable/disable `High Probability Bottom` vertical line and choose color Top Label: Enable/disable period top labels, choose color and size. Bottom Label: Enable/disable period bottom labels, choose color and size. Highlight Period Changes: Enable/disable vertical highlight at start of period
Pine Script® indicator
by LuxAlgo
7
Volume Based Price Prediction [EdgeTerminal]This indicator combines price action, volume analysis, and trend prediction to forecast potential future price movements. The indicator creates a dynamic prediction zone with confidence bands, helping you visualize possible price trajectories based on current market conditions. Key Features Dynamic price prediction based on volume-weighted trend analysis Confidence bands showing potential price ranges Volume-based candle coloring for enhanced market insight VWAP and Moving Average overlay Customizable prediction parameters Real-time updates with each new bar Technical Components: Volume-Price Correlation: The indicator analyzes the relationship between price movements and volume, Identifies stronger trends through volume confirmation and uses Volume-Weighted Average Price (VWAP) for price equilibrium Trend Strength Analysis: Calculates trend direction using exponential moving averages, weights trend strength by relative volume and incorporates momentum for improved accuracy Prediction Algorithm: combines current price, trend, and volume metrics, projects future price levels using weighted factors and generates confidence bands based on price volatility Customizable Parameters: Moving Average Length: Controls the smoothing period for calculations Volume Weight Factor: Adjusts how much volume influences predictions Prediction Periods: Number of bars to project into the future Confidence Band Width: Controls the width of prediction bands How to use it: Look for strong volume confirmation with green candles, watch for prediction line slope changes, use confidence bands to gauge potential volatility and compare predictions with key support/resistance levels Some useful tips: Start with default settings and adjust gradually Use wider confidence bands in volatile markets Consider prediction lines as zones rather than exact levels Best applications of this indicator: Trend continuation probability assessment Potential reversal point identification Risk management through confidence bands Volume-based trend confirmation
Pine Script® indicator
by EdgeTerminal
2
ATR Range Pivot LinesDescription: This Pine Script calculates and plots pivot lines based on ATR (Average True Range) value and closing price. It uses the previous trading day's ATR value to set static pivot levels for the current trading day. These pivot lines help traders identify potential support and resistance levels based on historical volatility. The script includes two main pivot lines—ATR High and ATR Low —and two midpoint lines between them for additional context. Labels are added to show the exact pivot values, with options to customize label positions. Intended Use: The script is designed to help traders forecast potential price ranges for the current trading day based on the previous day’s volatility. By adding and subtracting the previous day's ATR from the prior close, the script identifies key levels where price action may encounter support or resistance. It is useful for setting realistic price targets or entry/exit points. Since the ATR-based pivot lines are static for the entire day, they provide a reliable range for intraday trading strategies. Disclosure: This script was generated using AI. It is recommended to review and test the script thoroughly before applying it in live trading scenarios.
Pine Script® indicator
by Eli-Copter
ANN Trend PredictionThis trend indicator utilizes an artificial neural network (ANN) to predict the next market reversal within a certain range of previous candles. The larger the range of previous candles you set, the fewer reversals will be predicted, and trends will tend to last longer. The ANN is trained on the BTCUSD 4-hour chart, so using it on other assets or timeframes may yield suboptimal results. It takes three input values: the closing price, the Stochastic RSI, and a Choppiness Indicator. Based on these inputs, the ANN categorizes the current candle as part of an uptrend, downtrend, or as undefined. Compared to an EMA-based trend indicator, this ANN identifies reversals several candles earlier. It achieves this by detecting subtle patterns in the input values that typically appear before a market turnaround. These patterns are somewhat specific to that chosen asset and timeframe. The results are displayed using rows of triangles that indicate the predicted price direction. The price levels of the triangles correspond to the closing price at the last reversal. The area between the triangle row and the price is colored green if the ANN correctly predicted the move, and red if it did not. This indicator is designed to showcase the capabilities and potential of ANNs, and is not intended for actual trading use. The ANN can be trained on any other input values, assets and timeframes for several predictions tasks. You can use the Predicted_Trend_Signal of this Indicator in any backtest indicator. In the Backtester just grap the Predicted_Trend_Signal. downtrend = 1, uptrend = -1, undefined = 0 Feel free to write me a comment.
Pine Script® indicator
by BerlinCode42
7
Viking Fun PredictОсобая благодарность за оригинальную идею Александру Горчакову Индикатор предсказывает вырастет или упадет цена на следующей свече Индикатор отображает красные или зеленые кружки над каждой из свечей Зеленый кружок прогноз роста Красный кружок прогноз падения Индикатор выдает прогноз для шестой свечи на основе пяти свечей Индикатор берет цены максимумов и минимумов пяти свечей и усредняет их, получая 5 значений. На основе полученных 5 значений строится линейная регрессия Если линия линейной регрессии возрастает, то индикатор прогнозирует рост (зеленый кружок) Если линия линейной регрессии возрастает, то индикатор прогнозирует падение (красный кружок) Компания Викинг предоставляет профессиональный сервис, позволяющий реализовать арбитражные стратегии и маркет-мейкинг, осуществляет обучение трейдеров-арбитражеров. --------------------------- Special thanks for the original idea to Alexander Gorchakov The indicator predicts whether the price will rise or fall on the next candle The indicator displays red or green circles above each of the candles Green circle growth forecast Red circle forecast of the fall The indicator gives a forecast for the sixth candle based on five candles The indicator takes the prices of the highs and lows of five candles and averages them, getting 5 values. Based on the obtained 5 values, a linear regression is constructed If the linear regression line increases, the indicator predicts growth (green circle) If the linear regression line increases, the indicator predicts a fall (red circle) Viking provides a professional service that allows you to implement arbitrage strategies and market making, and provides training for arbitrage traders.
Pine Script® indicator
by megalevel
1
Moving Average Cross Probability [AlgoAlpha]Moving Average Cross Probability 📈✨ The Moving Average Cross Probability by AlgoAlpha calculates the probability of a cross-over or cross-under between the fast and slow values of a user defined Moving Average type before it happens, allowing users to benefit by front running the market. ✨ Key Features: 📊 Probability Histogram: Displays the Probability of MA cross in the form of a histogram. 🔄 Data Table: Displays forecast information for quick analysis. 🎨 Customizable MAs: Choose from various moving averages and customize their length. 🚀 How to Use: 🛠 Add Indicator: Add the indicator to favorites, and customize the settings to suite your trading style. 📊 Analyze Market: Watch the indicator to look for trend shifts early or for trend continuations. 🔔 Set Alerts: Get notified of bullish/bearish points. ✨ How It Works: The Moving Average Cross Probability Indicator by AlgoAlpha determines the probability by looking at a probable range of values that the price can take in the next bar and finds out what percentage of those possibilities result in the user defined moving average crossing each other. This is done by first using the HMA to predict what the next price value will be, a standard deviation based range is then calculated. The range is divided by the user defined resolution and is split into multiple levels, each of these levels represent a possible value for price in the next bar. These possible predicted values are used to calculate the possible MA values for both the fast and slow MAs that may occur in the next bar and are then compared to see how many of those possible MA results end up crossing each other. Stay ahead of the market with the Moving Average Cross Probability Indicator AlgoAlpha! 📈💡
Pine Script® indicator
by AlgoAlpha
15
ATR Price Range Prediction V.2### ATR Price Range Prediction V.2 This script calculates the expected high and low prices for the current day based on the Average True Range (ATR) and displays the proportion of days where the daily range (high - low) is greater than or equal to the ATR. Additionally, the script provides an option to adjust the size of the text displayed in the top-right corner of the chart. #### How It Works 1. **ATR Calculation**: The script calculates the ATR for a specified period (`atrPeriod`). ATR is a measure of volatility that represents the average range between the high and low prices over a specified number of periods. 2. **Expected High and Low Calculation**: - **Expected High**: Calculated by adding the ATR value to the low price of the current day. - **Expected Low**: Calculated by subtracting the ATR value from the high price of the current day. 3. **Proportion Calculation**: The script calculates the proportion of days where the daily range (high - low) is greater than or equal to the ATR value. This proportion is updated in real-time as new data comes in. 4. **Table Display**: Instead of displaying labels on each candle, the script shows the expected high, expected low, and the calculated proportion in a table located at the top-right corner of the chart. The size of the text in this table can be adjusted using the `Table Size` input. 5. **Color Coding**: The script changes the color of the bars to yellow if the daily range is greater than or equal to the ATR value, making it easy to identify these bars visually. #### How to Use - **ATR Period (`atrPeriod`)**: Adjust the period for the ATR calculation using the input parameter. The default value is 14. - **Table Size (`tableSizeOption`)**: Choose the size of the text displayed in the table. Options include `tiny`, `small`, `normal`, `large`, and `huge`. - **Expected High and Low**: Use the green and red lines to identify potential target prices or stop-loss levels for your trades. The green line represents the expected high, and the red line represents the expected low. - **Proportion**: The table in the top-right corner of the chart shows the proportion of days where the daily range is greater than or equal to the ATR value. This can provide insight into the volatility of the asset. - **Color Coding**: Yellow bars indicate days where the daily range is greater than or equal to the ATR value. --- ### ภาษาไทย ### ATR คาดการณ์ราคาสูงสุดและต่ำสุด พร้อมสัดส่วน สคริปต์นี้คำนวณราคาสูงสุดและต่ำสุดที่คาดการณ์สำหรับวันปัจจุบันโดยอิงจากค่าเฉลี่ยช่วงที่แท้จริง (ATR) และแสดงสัดส่วนของวันที่ช่วงราคาต่อวัน (สูง - ต่ำ) มากกว่าหรือเท่ากับค่า ATR นอกจากนี้ยังมีตัวเลือกในการปรับขนาดข้อความที่แสดงในกล่องข้อความมุมขวาบนของกราฟ #### วิธีการทำงาน 1. **การคำนวณ ATR**: สคริปต์คำนวณค่า ATR สำหรับช่วงเวลาที่กำหนด (`atrPeriod`) ATR เป็นมาตรวัดความผันผวนที่แสดงช่วงเฉลี่ยระหว่างราคาสูงสุดและต่ำสุดในช่วงเวลาที่กำหนด 2. **การคำนวณราคาสูงสุดและต่ำสุดที่คาดการณ์**: - **ราคาสูงสุดที่คาดการณ์**: คำนวณโดยการบวกค่า ATR กับราคาต่ำสุดของวันปัจจุบัน - **ราคาต่ำสุดที่คาดการณ์**: คำนวณโดยการลบค่า ATR จากราคาสูงสุดของวันปัจจุบัน 3. **การคำนวณสัดส่วน**: สคริปต์คำนวณสัดส่วนของวันที่ช่วงราคาต่อวัน (สูง - ต่ำ) มากกว่าหรือเท่ากับค่า ATR สัดส่วนนี้จะอัปเดตแบบเรียลไทม์เมื่อมีข้อมูลใหม่เข้ามา 4. **การแสดงผลในตาราง**: แทนที่จะแสดงป้ายกำกับบนแท่งเทียนแต่ละแท่ง สคริปต์จะแสดงราคาสูงสุดที่คาดการณ์ ราคาต่ำสุดที่คาดการณ์ และสัดส่วนที่คำนวณในตารางที่มุมขวาบนของกราฟ โดยสามารถปรับขนาดข้อความในตารางได้ 5. **การใช้สี**: สคริปต์จะเปลี่ยนสีของแท่งเทียนเป็นสีเหลืองหากช่วงราคาต่อวันมากกว่าหรือเท่ากับค่า ATR ทำให้สามารถระบุแท่งเทียนเหล่านี้ได้ง่ายขึ้น #### วิธีการใช้งาน - **ATR Period (`atrPeriod`)**: ปรับช่วงเวลาสำหรับการคำนวณ ATR โดยใช้พารามิเตอร์การป้อนค่า ค่าเริ่มต้นคือ 14 - **Table Size (`tableSizeOption`)**: เลือกขนาดข้อความที่แสดงในตาราง ตัวเลือกได้แก่ `tiny`, `small`, `normal`, `large`, และ `huge` - **ราคาสูงสุดและต่ำสุดที่คาดการณ์**: ใช้เส้นสีเขียวและสีแดงเพื่อระบุราคาที่เป็นเป้าหมายหรือระดับการหยุดขาดทุนสำหรับการซื้อขายของคุณ เส้นสีเขียวแสดงถึงราคาสูงสุดที่คาดการณ์และเส้นสีแดงแสดงถึงราคาต่ำสุดที่คาดการณ์ - **สัดส่วน**: ตารางที่มุมขวาบนของกราฟแสดงสัดส่วนของวันที่ช่วงราคาต่อวันมากกว่าหรือเท่ากับค่า ATR ซึ่งสามารถให้ข้อมูลเชิงลึกเกี่ยวกับความผันผวนของสินทรัพย์ - **การใช้สี**: แท่งเทียนสีเหลืองบ่งบอกถึงวันที่ช่วงราคาต่อวันมากกว่าหรือเท่ากับค่า ATR _____
Pine Script® indicator
by August_Supertrader
1
Correlated Movement Indicator V2Hello! This script was briefly known as as Bing Chilling. I converted this to Pine Script V5 to ensure compliance with publishing requirements. This script tracks RSI and inserts an indicator when correlated movement is detected. Proximity of current tick to indicator origin tick determines freshness of the indicator. DO NOT sit on the indicator for a long time. This is not a magic solution. It is very accurate but, not always precise. Ensure that you use other factors to determine the relevance of the indicator on current tick. This script can technically be used on any security/commodity/currency. Your Mileage May Vary! Proceed with caution as always. General Workflow: Look at proximity to where the flag is placed, general volatility, and other indicators and you can potentially determine the direction/strength. Not always the duration. The indicator could be for 30s, 1hr, 1 day, or whatever the market feels like. It depends on precision/quantity of pricing data. ex. 30min tick rate pricing vs. 1 day tick rate pricing will change the scope. So if the time scope shows all sell from 1 week -> 3 months except for a couple recent buy indicators on the day, then it may be a bad call long term but, might be good for a short term play. Very volatile. Careful. If it was all green with long term indicators such as 1 month -> 1 year, then it looks more like a buy and forget type strategy. If it's all green with a recent red then you can try and figure out what the relative the bottom is so you can buy for long term at a slightly more favorable price. Flip all that for shorting. I highly recommend AGAINST shorting since the stakes are very different and usually involves taking out what is essentially a loan to bet against the market. This script pairs nicely with the top pick indicator when you search "Heiken Ashi". I use that to determine peaks and pits to better guess a good time to open a position. This should be used alongside other indicators. Good for short term day trading and long term hold and forget. (Don't actually forget. Set some alerts periodically.) Please use caution. Please do not take what I've said here as fact and diamond pepe hands bet all on green to the moon. This, like all the other strategies and indicators on this site, are used as tools to inform you about potential and to categorize/depict data in a more human recognizable way. If you have access to a paper account try there first. Happy trading! - Zetsu
Pine Script® indicator
by rezetsu
3
Monte Carlo Shuffled Projection [LuxAlgo]The Monte Carlo Shuffled Projection tool randomly simulates future price points based on historical bar movements made within a user-selected window. The tool shows potential paths price might take in the future, as well as highlighting potential support/resistance levels. Note that simulations and their resulting elements are subject to slight changes over time. 🔶 USAGE By randomly simulating bar movements, a range is developed of potential price action which could be utilized to locate future price development as well as potential support/resistance levels. Performing a large number of simulations and taking the average at each step will converge toward the result highlighted by the "Average Line", and can point out where the price might develop assuming the trend and amount of volatility persist. Current closing price + Sum of changes in the calculation window) This constraint will cause the simulations to always display an endpoint consistent with the current lookback's slope. While this may be helpful to some traders, this indicator includes an option to produce a less biased range as seen below: 🔶 DETAILS The Monte Carlo Shuffled Projection tool creates simulations based on the most recent prices within a user-set window. Simulations are done as follows: Collect each bar's price changes in the user-set window. Randomize the order of each change in the window. Project the cumulative sum of the shuffled changes from the current closing price. Collect data on each point along the way. This is the process for the Default calculation, for the 'Randomize Direction' calculation, when added onto the front for every other change, the value is inverted, creating the randomized endpoints for each simulation. The script contains each simulation's data for that bar with a maximum of 1000 simulations. To get a glimpse behind the scenes each simulation (up to 99) can be viewed using the 'Visualize Simulations' Options as seen below. Because the script holds the full simulation data, the script can also do calculations on this data, such as calculating standard deviations. In this script the Standard deviation lines are the average of all standard deviations across the vertical data groups, this provides a singular value that can be displayed a distance away from the simulation center line. 🔶 SETTINGS Color and Toggle Options are Provided throughout. Lookback: Sets the number of Bars to include in calculations. Simulation Count: Sets the number of randomized simulations to calculate. (Max 1000) Randomize Direction: See Details Above. Creates a more 'Normalized' Distribution Visualize Simulations: See Details Above. Turns on Visualizations, and colors are randomly generated. Visualized max does not cap the calculated max. If 1000 simulations are used, the data will be from 1000 simulations, however only the last 99 simulations will be visualized. Standard Deviation Multiplier: Sets the multiplier to use for the Standard Deviation distance away from the center line.
Pine Script® indicator
by LuxAlgo
9
Entry FraggerEntry Fragger is a simple buy signal indicator. It is most suitable for cryptocurrency, especially for altcoins on the 5 minute to daily timeframe and is based on simple volume calculations, in combination with EMA's. Main Signal Logic explained: A buy signal is generated by counting candles with an above average sell volume of 130% to 170%, taking into account the candles position below and above the 50 and 200 EMA. If criteria meet, the first green candle above the 50 EMA's suggests upcoming higher prices. The indicator has 2 input variables. "Signal Confirmations (0 - 7):" Changes signal accuracy by a defining an ammount of high sell volume candles necessary below the 50 EMA. "Volume Calculation Base (9 - 200):" Sets the exponential volume multiplier, this affects candle coloring and the volume calculation inside the candle. "Style Settings": Turn ON/OFF Signals, Cloud, Bar Coloring, EMA's, etc... There are no generally suitable default numbers for those 2 inputs, those have to be tested out, depending on cryptocurrency and timeframe. The calculation is very basic, the underlying idea being, market maker initiating range breakouts through rapid increase of volume above or below the EMA's . Example settings: SOLUSDT: Signal Confirmations: 2, Volume Calculation Base 13. SOLUSDT: Signal Confirmations: 0, Volume Calculation Base 20. As you can see it affects signals quite a lot, but staying accurate. Finetune the inputs to your preference. Risk to Reward, Stoploss, Take Profit, position sizing, etc... is up to the user. Recommended entry is to wait for following candle closes, entering half of the candle size and setting Stoploss outside the structure, like this: Or right below the candles open, for safety.
Pine Script® indicator
by ppx10
5
Price Action Fractal Forecasts [AlgoAlpha]🔮 Price Action Fractal Forecasts - Unleash the Power of Historical Patterns! 🌌✨ Dive into the future with AlgoAlpha's Price Action Fractal Forecasts ! This innovative indicator utilizes the mesmerizing complexity of fractals to predict future price movements, offering traders a unique edge in the market. By analyzing historical price action and identifying repeating patterns, this tool forecasts future price trends, providing visually engaging and actionable insights. Key Features: 🔄 Flexible Data Series Selection: Choose your preferred data series for precise analysis. 🕰 Flexible Training and Reference Data Windows: Customize the length of training data and reference periods to match your trading style. 📈 Custom Forecast Length: Adjust the forecast horizon to suit your strategic objectives. 🌈 Customizable Visual Elements: Tailor the colors of forecast deviation cones, data reference areas, and more for optimal chart readability. 🔄 Anticipatory and Repetitive Forecast Modes: Select between anticipating future trends or identifying repetitive patterns for forecasts. 🔎 Enhanced Similarity Search: Leverages correlation metrics to find the most similar historical data segments. 📊 Forecast Deviation Cone: Visualize potential price range deviations with adjustable multipliers. 🚀 Quick Guide to Maximizing Your Trading with Price Action Fractal Forecasts: 🛠 Add the Indicator: Search for "Price Action Fractal Forecasts" in TradingView's Indicators & Strategies. Customize settings according to your trading strategy. 📊 Strategic Forecasting: Monitor the forecast deviation cone and forecast directional changes for insights into potential future price movements. 🔔 Alerts for Swift Action: Set up notifications based on forecast changes to stay ahead of market movements without constant monitoring. Behind the Magic: How It Works The core of the Price Action Fractal Forecasts lies in its ability to compare current market behavior with historical data to unearth similar patterns. It first establishes a training data window to analyze historical prices. Within this window, it then defines a reference length to identify the most recent price action that will serve as the basis for comparison. The indicator searches through the historical data within the training window to find segments that closely match the recent price action in the reference period. Depending on whether you choose the anticipatory or repetitive forecast mode, the indicator either looks ahead to predict future prices based on past outcomes following similar patterns or focuses on the repeating patterns within the reference period itself for forecasts. The forecast's direction can be configured to reflect the mean average of forecasted prices or the end-point relative to the start-point of the forecast, offering flexibility in how forecasts are interpreted. To enhance the comprehensiveness and visualization, the indicator features a forecast deviation cone. This cone represents the potential range of price movements, providing a visual cue for volatility and uncertainty in the forecasted prices. The intensity of this cone can be adjusted to suit individual preferences, offering a visual guide to the level of risk and uncertainty associated with the forecasted price path. Embrace the fractal magic of markets with AlgoAlpha's Price Action Fractal Forecasts and transform your trading today! 🌟🚀
Pine Script® indicator
by AlgoAlpha
28
Forecast: PastFluxDelta PredictionThe theory is that time periods and the conditions during these periods repeat themselves. Especially if it is the same day of the week in the past, there is a high probability that price fluctuations will roughly repeat themselves. Eternal return (or eternal recurrence) is a philosophical concept which states that time repeats itself in an infinite loop, and that exactly the same events will continue to occur in exactly the same way, over and over again, for eternity. History does repeat itself. The stock market is a manifest example. Chief market strategist at Miller Tabak + Co. Matt Maley pointed out the strong resemblance between the stock market recently and that in the past. Various scientific studies and articles show that there could be something to this theory Most of the investors are ignoring the parallels between stocks today and "heady" years 1929, 1999 and 2007… Post Labor Day sees investors returning to the S&P 500 near all-time highs and some dark economic shadows lurking … So how should we regard these inescapable results? Nietzsche said we should embrace them, accept them, and love them. Once they stop, expect them to start again. But remember that the future is fundamentally uncertain and that past results are by no means a guarantee of future performance. Based on this, this indicator uses historical trading data from a year, a week or a day ago and compares price fluctuations in the past with current conditions. "Bars to predict" can be used to indicate how far into the future the indicator is looking. "Amount of bars to show" determines how many bars are generally displayed. A high value allows you to see how accurate the method was in the past.
Pine Script® indicator
by the_real_spoofer
2
Whalemap [BigBeluga]The Whalemap indicator aims to spot big buying and selling activity represented as big orders for a possible bottom or top formation on the chart. 🔶 CALCULATION The indicator uses volume to spot big volume activity represented as big orders in the market. for i = 0 to len - 1 blV.vol += (close > close ? volume : 0) brV.vol += (close < close ? volume : 0) When volume exceeds its own threshold, it is a sign that volume is exceeding its normal value and is considered as a "Whale order" or "Whale activity," which is then plotted on the chart as circles. 🔶 DETAILS The indicator plots Bubbles on the chart with different sizes indicating the buying or selling activity. The bigger the circle, the more impact it will have on the market. On each circle is also plotted a line, and its own weight is also determined by the strength of its own circle; the bigger the circle, the bigger the line. Old buying/selling activity can also be used for future support and resistance to spot interesting areas. The more price enters old buying/selling activity and starts producing orders of the same direction, it might be an interesting point to take a closer look. 🔶 EXAMPLES The chart above is showing us price reacting to big orders, finding good bottoms in price and good tops in confluence with old activity. 🔶 SETTINGS Users will have the options to: Filter options to adjust buying and selling sensitivity. Display/Hide Lines Display/Hide Bubbles Choose which orders to display (from smallest to biggest)
Pine Script® indicator
by BigBeluga
43
Machine Learning: Gaussian Process Regression [LuxAlgo]We provide an implementation of the Gaussian Process Regression (GPR), a popular machine-learning method capable of estimating underlying trends in prices as well as forecasting them. While this implementation is adapted to real-time usage, do remember that forecasting trends in the market is challenging, do not use this tool as a standalone for your trading decisions. 🔶 USAGE The main goal of our implementation of GPR is to forecast trends. The method is applied to a subset of the most recent prices, with the Training Window determining the size of this subset. Two user settings controlling the trend estimate are available, Smooth and Sigma . Smooth determines the smoothness of our estimate, with higher values returning smoother results suitable for longer-term trend estimates. Sigma controls the amplitude of the forecast, with values closer to 0 returning results with a higher amplitude. Do note that due to the calculation of the method, lower values of sigma can return errors with higher values of the training window. 🔹 Updating Mechanisms The script includes three methods to update a forecast. By default a forecast will not update for new bars (Lock Forecast). The forecast can be re-estimated once the price reaches the end of the forecasting window when using the "Update Once Reached" method. Finally "Continuously Update" will update the whole forecast on any new bar. 🔹 Estimating Trends Gaussian Process Regression can be used to estimate past underlying local trends in the price, allowing for a noise-free interpretation of trends. This can be useful for performing descriptive analysis, such as highlighting patterns more easily. 🔶 SETTINGS Training Window: Number of most recent price observations used to fit the model Forecasting Length: Forecasting horizon, determines how many bars in the future are forecasted. Smooth: Controls the degree of smoothness of the model fit. Sigma: Noise variance. Controls the amplitude of the forecast, lower values will make it more sensitive to outliers. Update: Determines when the forecast is updated, by default the forecast is not updated for new bars.
Pine Script® indicator
by LuxAlgo
31
Machine Learning: Support and Resistance [YinYangAlgorithms]Overview: Support and Resistance is normally based upon Pivot Points and Highest Highs and Lowest Lows. Many times coders even incorporate Volume, RSI and other factors into the equation. However there may be a downside to doing a pure technical approach based on historical levels. We live in a time where Machine Learning is becoming more and more used; thus we have decided to create a Machine Learning Support and Resistance Projection based Indicator. Rather than using traditional Support and Resistance calculations using historical data, we have taken a rather different approach. This Indicator instead attempts to Predict and Project where Support and Resistance locations will be based on a Machine Learning Model using a form of KNN (k-Nearest Neighbors). Since this indicator creates a Projection of where it deems Support and Resistance will be, it has the ability to move its Support and Resistance before the price even gets to it if it believes it will surpass its projections. This may create a more accurate placement of Support and Resistance as they’re not based on historical levels. This Indicator does not Repaint. How it works: This Indicator makes its projections based on the source you provide (by default close) of the previous bar and submits the source, RSI and EMA to our Projection Function to get its projection of the current bar. The Projection function essentially calculates potential movement after finding the differences between the source the MA from the current bar, previous bar and average over the span of Machine Learning Length. Potential movement is defined as: Average Difference + Average(Machine Learning Average, Average Last Distance) Average Difference: (Absolute value of Current Source - Current MA) - (Absolute value of Machine Learning Average - Machine Learning MA) Average Last Distance: Average(Current Source - Current MA, Previous Source - Previous MA) It then predicts the next bars directional movement (bullish or bearish bar) using several factors: Previous Source > Previous MA Current Source - Current MA > Average Source - Average MA Current RSI > Previous RSI Current RSI > 30 and Previous RSI <= 30 Current RSI < 70 and Previous RSI >= 70 This helps us to predict the direction the next bar may move. We then calculate a multiplier that we apply to our Potential Movement value to get our final result which is our Current Bars Close Projection. Our multiplier is calculated using: (Current RSI > 30 and Previous RSI <= 30) OR (Current RSI < 70 and Previous RSI >= 70) Current Source - Current MA > Previous Source - Previous MA We then create an array and fill it with the previous X projections (Machine Learning Length) and send it to another function. This function, if told to, will sort the data accordingly and then output the KNN average of the length given. We calculate and plot various KNN lengths to create different Zones: Strong Support: Length of 2 but sort the data Ascending (low to high) Strong Resistance: Length of 2 but sort the data Descending (high to low) Support: Length of Machine Length Length / 10 or Min of 2 sorted by Ascending Resistance: Length of Machine Length Length / 10 or Min of 2 sorted by Descending There are also 4 other plots you may be wondering what they are, there is your AVG, VWMA, Long Term Memory and Current Projection. By default your Current Projection is disabled in settings but you can enable it if you are curious to see how the projections for each close are calculated. It is, however, not a crucial point of interest (white line). The average is simply the average value of the Machine Learning Data (purple line). The VWMA is a VWMA calculation applied to our Data over a length specified in settings (by default 1)(blue line). The VWMA is crucial when combined with the Avg as they can cross over and under each other. These crosses represent potential Bullish and Bearish zones. Lastly, but certainly not least, we have the Long Term Memory (maroon line). The Long Term Memory can be displayed either as an ‘Average’, ‘Hard Line’ or ‘None’. The Long Term Average is only updated every Machine Learning Length Bar Index’s and is populated with the average of the Machine Learning Data. For Instance, if Machine Learning Length is set to 100, the Long Term Memory is only updated every 100 bars, and since its length is the same as the Machine Learning Length, that means its data is composed of 10,000 bars worth of data. The Long Term Memory may be very beneficial for determining where Support and Resistance lie over the Long Term within a Machine Learning Algorithm. When set to ‘Average’ it plots the connection lines diagonally, and although they may be more visually appealing, they’re less useful when it comes to actually seeing support and resistance as generally speaking, support and resistance lie on the horizontal. When set to ‘Hard Line’ the Long Term Memory is connected with hard lines and holds the price value until the next time it is updated. This makes it much more useful for potentially identifying Support and Resistance. Tutorial: Here is an overview of what the Indicator looks like, now let's start to dissect it. In the example above we can see how all of the lines between the Major Support and Resistance zones may act as BOTH Support and Resistance depending on which side the price is currently on. In the circle on the left, we can see how it can fluctuate between the two. If you look at the circle on the right, we can see how the Average line acts as a strong support before it fails to maintain it. Generally speaking, most Support and Resistance locations may potentially fail to hold after 3 tests, as the Average did in this example. As you can see, the Support and Resistance doesn’t wait to be tested before adjusting, which is why there are 2 lines which create their zones. The inner line is the Support/Resistance and the outer line is the Strong Support/Resistance. The Yellow Circle shows the inner line was able to calculate the moving resistance correctly and then adjusted accordingly as it was projecting the price to keep increasing. However, if you look at the White Circle, you can see that since there was first a crash, and then parabolic movement, that the inner zone could not move and predict the resistance as well as the outer zone could. We consider the price to be ‘Overvalued’ when it is above the VWMA (blue line) and ‘Undervalued’ when it is below the VWMA. It is considered ‘fair’ price when it is within the VWMA to Average zone (between the blue and purple lines). If you look at the example above, you’ll notice where the two yellow circles are, it is not only considered ‘Overvalued’, but it then proceeds to ride the inner resistance line upwards. This is common when the market is overly bullish and vice versa when it is bearish. Please keep in mind, although it is common, it doesn’t mean a correction can’t happen. In this example above we look at the last bull run that may have started due to the halving. This bull run was very bullish as you can see in the example above. The price was constantly sitting within the Resistance Zone and the VWMA that was very close to it was constantly acting as a Support. Naturally, due to the Algorithm used in this Indicator, as the momentum starts to slow down, the VWMA (blue line) will start to space out more and more from the Resistance Zone. This doesn’t mean the momentum is gone, it just means it may be slowing down. Unfortunately we have to study the Bear Market with a different perspective than the Bull Market. However, there are still some similarities within the two. If you refer to the example above and the previous example, you can clearly see that the Bull Market loves to stay with the Resistance Zone and use the VWMA as a Support. However, the Bear Market does not. This is a normal occurrence, however we can see from the example above you may see a correction / horizontal movement when the Outer Support Line is touched. If you look at all 3 yellow circles, the Outer Support Line was touched, then either a small correction or horizontal consolidation occurred. We will conclude our Tutorial here, hopefully you’ll be able to benefit from a moving Support and Resistance calculated with Machine Learning that projects its locations, rather than using traditional calculations. Settings: Source: This source is the base for all our calculations Machine Learning Length: How much projection data are we storing and using to make calculations. Smoothing Length: We need to smooth calculations such as RSI, EMA and VWMA. What length are we smoothing it with? VWMA ML Projection Length: How far into our Machine Learning data should we average for our VWMA. Please note the 'Smoothing Length' is still applied here after getting the Projection Average. Long Term Memory: Long term memory has the same storage length but is only updated once per Machine Learning Length. For instance, if Machine Learning Length is 100, it will save the Average of our data once every 100 bars. This means its memory is an average of 10,000 bars of Machine Learning. 'Average' connects its values diagonally whereas 'Hard Line' holds its value until it changes. Use Average Last Distance In Potential Movement: This can help accuracy but generally also displaces the Support and Resistance by projecting it further. Show Current Projection: Projections occur for each bar, and our Machine Learning utilizes these projections by storing and evaluating them. This toggle will display the Current Projection Line which is used to create all our Projections. If you have any questions, comments, ideas or concerns please don't hesitate to contact us. HAPPY TRADING!
Pine Script® indicator
by YinYangAlgorithms
8
YinYang Bar ForecastOverview: YinYang Bar Forecast is a prediction indicator. It predicts the movement for High, Low, Open and Close for up to 13 bars into the future. We created this Indicator as we felt the TradingView community could benefit from a bar forecast as there wasn’t any currently available. Our YinYang Bar Forecast is something we plan on continuously working on to better improve it, but at its current state it is still very useful and decently accurate. It features many calculations to derive what it thinks the future bars will hold. Let’s discuss some of the logic behind it: Each bar has its High, Low, Open and Close calculated individually for highest accuracy. Within these calculations we first check which bar it is we are calculating and base our span back length that we are getting our data from based on the bar index we are generating. This helps us get a Moving Average for this bar index. We take this MA and we apply our Custom Volume Filter calculation on it, which is essentially us dividing the current bars volume over the average volume in the last ‘Filtered Length’ (Setting) length. We take this decimal and multiply it on our MA and smooth it out with a VWMA. We take the new Volume Filtered MA and apply a RSI Filter calculation on it. RSI Filter is where we take the difference between the high and low of this bar and we multiply it with an RSI calculation using our Volume Filtered MA. We take the result of that multiplication and either add or subtract it from the Volume Filtered MA based on if close > open. This makes our RSI Filtered MA. Next, we do an EMA Strength Calculation which is where we check if close > ema(close, ‘EMA Averaged Length’) (Setting). Based on this condition we assign a multiplier that is applied to our RSI Filtered MA. We divide by how many bars we are predicting and add a bit to each predictive bar so that the further we go into the future the stronger the strength is. Next we check RSI and RSI MA levels and apply multiplications based on its RSI levels and if it is greater than or less than the MA. Also it is affected by if the RSI is <= 30 and >= 70. Finally we check the MFI and MFI MA levels and like RSI we apply multiplications based on its MFI levels and if it is greater than or less than the MA. It is also affected by if the MFI is <= 30 and >= 70. Please note the way we calculate this may change in the future, this is just currently what we deemed works best for forecasting the future bars. Also note this script uses MA calculations out of scope for efficiency but there is potential for inconsistencies. Innately it’s main use is the projection it provides. It only draws the bars for realtime bars and not historical ones, so the best way to backtest it is with TradingView’s Replay Tool. Well, enough of the logic behind it, let's get to understanding how to use it: Tutorial: So unfortunately we aren’t able to plot legit bars/candles into the future so we’ve had to do a bit of a work around using lines and fills. As you can see here we have 4 Lines and 3 Zones: Lines: Green: Represents the High Orange: Represents the Open Teal: Represents the Close Red: Represents the Low Zones: High Zone: This zone is from either Open or Close to the High and is ALWAYS filled with Green. Open/Close Zone: This zone is from the Open to the Close and is filled with either Green or Red based on if it's greater than the previous bar (real or forecasted). Low Zone: This zone is from either Open or Close to the Low and is ALWAYS filled with Red. As you can see generally the Forecasted bars are generally within strong pivot locations and are a good estimation of what will likely go on. Please note, the WHOLE structure of the prediction can change based on the current bars movements and the way it affects the calculations. Let's look 1 bar back from the current bar just so we can see what it used to Forecast: As you can see it has changed quite a bit from the previous bar, but if you look close, we drew horizontal lines around where its projecting the next bar to be (our current realtime bar), if we go back to the live chart: Its projections were pretty close for the high and low. Generally, right now at least, it does a much better job at predicting the high and low than it does the open and close, however we will do our best to fine tune that in future updates. Remember, this indicator is not meant to base your trades on, but rather give you a Forecast towards the general direction of the next few bars. Somewhat like weather, the farther the bar (or day for weather), the harder it is to predict. For this reason we recommend you focusing on the first few bars as they are more accurate, but review the further ones as they may help show the trend and the way that pair will move. We will conclude this tutorial here, hopefully this Predictive Indicator can be of some help and use to you. If you have any questions, comments, ideas or concerns please let us know. Settings: Forecast Length: How many bars should we predict into the Future? Max 13 Each Bar Length Multiplier: For each new Forecast bar, how many more bars are averaged? Min 2 VWMA Averaged Length: All Forecast bars are put into a VWMA, what length should we use? EMA Averaged Length: All Forecast bars are put into a EMA, what length should we use? Filtered Length: What length should we use for Filtered Volume and RSI? EMA Strength Length: What length should we use for the EMA Strength HAPPY TRADING!
Pine Script® indicator
by YinYangAlgorithms
2
Liquidity Heatmap [BigBeluga]The Liquidity Heatmap is an indicator designed to spot possible resting liquidity or potential stop loss using volume or Open interest. The Open interest is the total number of outstanding derivative contracts for an asset—such as options or futures—that have not been settled. Open interest keeps track of every open position in a particular contract rather than tracking the total volume traded. The Volume is the total quantity of shares or contracts traded for the current timeframe. 🔶 HOW IT WORKS Based on the user choice between Volume or OI, the idea is the same for both. On each candle, we add the data (volume or OI) below or above (long or short) that should be the hypothetical liquidation levels; More color of the liquidity level = more reaction when the price goes through it. Gradient color is calculated between an average of 2 points that the user can select. For example: 500, and the script will take the average of the highest data between 500 and 250 (half of the user's choice), and the gradient will be based on that. If we take volume as an example, a big volume spike will mean a lot of long or short activity in that candle. A liquidity level will be displayed below/above the set leverage (4.5 = 20x leverage as an example) so when the price revisits that zone, all the 20x leverage should be liquidated. Huge volume = a lot of activity Huge OI = a lot of positions opened More volume / OI will result in a stronger color that will generate a stronger reaction. 🔶 ROUTE Here's an example of a route for long liquidity: Enable the filter = consider only green candles. Set the leverage to 4.5 (20x). Choose Data = Volume. Process: A green candle is formed. A liquidity level is established. The level is placed below to simulate the 20x leverage. Color is applied, considering the average volume within the chosen area. Route completed. 🔶 FEATURE Possibility to change the color of both long and short liquidity Manual opacity value Manual opacity average Leverage Autopilot - set a good average automatically of the opacity value Enable both long or short liquidity visualization Filtering - grab only red/green candle of the corresponding side or grab every candle Data - nzVolume - Volume - nzOI - OI 🔶 TIPS Since the limit of the line is 500, it's best to plot 2 scripts: one with only long and another with only short. 🔶 CONCLUSION The liquidity levels are an interesting way to think about possible levels, and those are not real levels.
Pine Script® indicator
by BigBeluga
34