Get started

Indicators and strategies

NR4 & NR7 with Breakouts [LuxAlgo]NR4 & NR7 with Breakouts is a simple indicator that utilizes the NR4 and NR7 candle patterns to display candle ranges and signals from range breakouts. 🔶 USAGE The Narrow Range Patterns are candle formations determined by the last candle having a narrower (high-low) range than the previous number. This indicator showcases the 2 most recognized Narrow Range Patterns, which are the 4 and 7 bar variants (NR4 and NR7). These patterns, introduced by Toby Crabel, are thought to provide insight for potential market breakouts by identifying periods of low volatility indicated by a candle with a small range. This is due to the idea that markets often move from periods of low volatility (contraction) to high volatility (expansion), and the NR4 and NR7 patterns help spot these transitions. By utilizing these patterns, traders are better able to anticipate and respond to market shifts for better decision-making and risk management. NOTE: These patterns have traditionally been studied on the Daily Timeframe Chart. This indicator allows the user to select a timeframe to generate these patterns from. It is suggested to be mindful of this when considering these patterns. In this indicator, on the bar after the pattern is detected, the Narrow Range Bar will be highlighted with a zone, and lines displaying the range will extend from it. These ranges are helpful for providing levels to set limit orders and for managing risk. Users are able to adjust which pattern they want visualized on their chart, please note; All NR7s are NR4s but not all NR4s are NR7s. Because of this, you will notice that when selecting "NR4" to display, the colors will change, but the detected ranges will not change. 🔹 Signals When a Narrow Range Bar is detected, the script will wait for the price to close outside of the Range, then a signal will fire indicating the direction of exit. The signals are produced from the last NR4 or NR7 and will have the potential to fire from that range until a new NR4 or NR7 is detected. After a signal fires, the logic goes into a "reset" period where it will wait for the price to reach the Range Mean before firing another signal. These signals can be anticipated by considering the underlying logic and watching price approach the range extremities, and can be improved by utilizing other market information for confluence. 🔶 SETTINGS Timeframe: Choose which timeframe to identify the NR4 and NR7 Pattern on. This must be Higher than the chart timeframe. Pattern Type: Choose which (or all) patterns to display.
Pine Script® indicator
by LuxAlgo
8
Daily ATR Bonanza: Expected Moves - Tr33man      Daily ATR Bonanza: Expected Moves Overview 🤷‍♂️ The Daily ATR Bonanza script is a powerful trading tool designed to help traders visualize and understand potential price movements using the Average True Range (ATR). It provides daily and weekly ATR levels, historical statistics, and conditional probability analysis to give traders actionable insights. The script also plots the daily Keltner channel. This script is ideal for traders who want to gauge volatility, identify key levels, and make data-driven decisions. b]Key Features: 📈 1. Daily and Weekly ATR Levels  🔵ATR Levels: The script calculates and displays ATR-based levels for the day and week. These levels are derived from the previous day's or week's close price and are adjusted using customizable multipliers (0.5x, 1x, and 1.5x by default).  🔵You can choose the number of ATR levels (1, 2, or 3) and adjust the multipliers to suit your trading strategy. 🌐 2. ATR Bands (Keltner Channels)  🔵The script includes an option to display ATR Bands, which are volatility-based envelopes around a moving average. These bands help identify overbought and oversold conditions.  🔵You can adjust the ATR multiplier and the length of the moving average used for the bands. 🧮 3. Historical Statistics and Conditional Probability  🔵 Historical Analysis: The script analyzes historical price movements to calculate the likelihood of closing at certain ATR levels.  🔵 Conditional Probability: This feature shows the probability of the price reaching specific ATR levels given the current market conditions. The conditional matches historical data by an open in the same opening ATR bucket, as well as the current price bucket having been visited in the historical case. Conditional probabilities are just statistics, and do not predict anything. Data Table: 📚  🔵 Historical Close Probability: The percentage of days the price closed within each ATR level.  🔵 Conditional Close Probability: The likelihood of the price closing within each ATR level today. ❓ What is Conditional Probability? ❓ Conditional probability is a statistical measure that calculates the likelihood of an event occurring given that another event has already occurred. In this script, it is used to determine the probability of the price reaching specific ATR levels based on the current opening range as well as current ATR distance from the previous close. For example: If the market opens near the lower end of the first ATR level, the script calculates the likelihood of the price reaching the upper end of the first, second, or third ATR level. This analysis is based on historical data, making it a powerful tool for understanding potential price movements. 🌟 Understanding the Levels  🔵Daily Levels: These are based on the previous day's close price and ATR. They are updated at the start of each new day.  🔵Weekly Levels: These are based on the previous week's close price and ATR. They are updated at the start of each new week.  🔵ATR Bands: These are dynamic levels that adjust with market volatility. 🔬 Analyze the Statistics (Daily only for now, no weekly yet)  🔵Use the interactive table to understand historical probabilities and conditional probabilities.  🔵Focus on the current opening range and the likelihood of reaching specific levels. 🧠 Make Trading Decisions  🔵Use the ATR levels and bands to identify key support and resistance levels.  🔵Use the conditional probability table to gauge the likelihood of reaching specific targets.  🔵Adjust your strategy based on the historical performance of the market. Example Use Cases 1. Day Trading Use the daily ATR levels to set intraday targets and stop-loss levels. Monitor the conditional probability table to adjust your expectations based on the opening range. 2. Swing Trading Use the weekly ATR levels to identify longer-term support and resistance levels. 3. Scalping Use the ATR bands to identify overbought and oversold conditions. Use the conditional probability table to quickly assess the likelihood of price movements.
Pine Script® indicator
by Tr33man
1
OTE & A-B-C Zone Indicator SwiftEdgeOTE & A-B-C Zone Indicator SwiftEdge Overview The OTE & A-B-C Zone Indicator SwiftEdge is a versatile tool designed to help traders identify high-probability trading setups using a combination of Optimal Trade Entry (OTE) zones, Fibonacci levels, and A-B-C price patterns. This indicator is particularly useful for traders who rely on price action and Fibonacci-based strategies to find entry points, set stop-losses, and target potential take-profit levels. By integrating swing point detection, trend analysis, and Fibonacci projections, SwiftEdge provides a clear visual framework for making informed trading decisions across various timeframes. What It Does SwiftEdge identifies key price levels and zones to guide your trading: OTE Zone: Highlights the Optimal Trade Entry zone between swing points A (swing high) and B (swing low) using Fibonacci retracement levels (default: 0.618 to 0.786). This zone represents a high-probability area for price reversals, making it an ideal entry point for trades. A-B-C Pattern: Marks the latest swing points as A (swing high), B (swing low), and C (projected take-profit level) with dashed lines and labels. A solid line connects A to B to C, visually illustrating the price movement from entry to target. Take-Profit Zones: Projects three customizable take-profit levels (TP1, TP2, TP3) based on Fibonacci extensions (default: 1.272, 1.618, 2.0) from the A-B swing, helping traders plan exits with favorable risk-reward ratios. How It Works SwiftEdge combines several technical components to create a cohesive trading system: Swing Point Detection: Identifies significant swing highs (A) and swing lows (B) using a dynamic lookback period that adjusts to the selected timeframe. On lower timeframes like 1-minute charts, an ATR-based filter reduces noise by requiring price movements to exceed a threshold (0.5 * ATR(14)). Trend Analysis: Uses an Exponential Moving Average (EMA) to determine the trend direction (default: 50-period EMA on 1H). The indicator marks uptrends (price above EMA) in green and downtrends (price below EMA) in red, ensuring trades align with the market's direction. Fibonacci Levels: Applies Fibonacci retracement to define the OTE zone between A and B, and Fibonacci extensions to project take-profit levels (C) beyond the initial swing. This approach leverages the natural tendency of markets to respect Fibonacci ratios for reversals and extensions. Visual Clarity: Displays only the latest A-B-C pattern with three dashed lines (A, B, C) and a solid connecting line, ensuring the chart remains uncluttered and easy to interpret. The combination of these elements creates a structured setup where the OTE zone (between A and B) serves as an entry point, while the projected C level offers a target, all within the context of the prevailing trend. This synergy makes SwiftEdge a powerful tool for traders seeking to combine price action, trend analysis, and Fibonacci strategies. How to Use Add the Indicator: Apply the indicator to your chart via TradingView's indicator menu. Identify the Trend: The OTE zone and A-B-C pattern will be colored green in uptrends (price above EMA) or red in downtrends (price below EMA). Use this to determine the market direction. Entry Point: Look for price reversals within the OTE zone (between A and B). This zone is typically between the 0.618 and 0.786 Fibonacci retracement levels of the A-B swing, making it a high-probability area for entries. Stop-Loss: Place your stop-loss below the OTE zone in an uptrend (or above in a downtrend) to protect against false breakouts. Take-Profit Targets: Use the projected take-profit zones (TP1, TP2, TP3) as potential exit levels. These are based on Fibonacci extensions and can be toggled on/off in the settings. Customization: Adjust the Fibonacci levels for the OTE zone (Fibonacci Level 1 and Fibonacci Level 2) to suit your strategy. Modify the take-profit levels (Fibonacci Extension Level for TP1/TP2/TP3) to target different extension ratios. Change the lookback period (Base Lookback Period) and EMA period (Base EMA Period) to fine-tune swing point detection and trend sensitivity. Customize colors for uptrends, downtrends, and A-B-C lines to match your preferences. What Makes It Unique SwiftEdge stands out by integrating swing point detection, Fibonacci-based OTE zones, and A-B-C price patterns into a single, visually intuitive indicator. Unlike standalone Fibonacci tools or trend indicators, SwiftEdge combines these elements to provide a complete trading setup: it identifies entry zones (OTE), confirms trend direction (EMA), and projects take-profit targets (Fibonacci extensions). The dynamic timeframe adjustment ensures consistent performance across all chart intervals, while the clean A-B-C visualization (with only the latest pattern displayed) prevents chart clutter, making it easier to focus on the most relevant price levels. Notes This indicator is designed for traders familiar with price action and Fibonacci strategies. It does not guarantee profits and should be used in conjunction with other analysis tools and proper risk management. Performance may vary depending on market conditions and timeframe. Test the indicator on a demo account before using it in live trading.
Pine Script® indicator
by SwiftEdge
2
Swing Cloud Signal🟢 Swing Cloud Signal 📉📈 A custom indicator designed for swing trading — an extended version of the Scalp Cloud Signal, optimized for higher timeframes (H1 to 1D) 🧠 Concept: This indicator is based on an EMA crossover system, applying two Exponential Moving Averages to detect broader trend phases in swing trading: ⚡ Fast EMA: period 21 🐢 Slow EMA: period 55 🎯 How it works: ✅ Bullish crossover (EMA 21 crosses above EMA 55) →   🌿 Green cloud = Bullish trend   🔼 A small bull triangle appears below the candle ❌ Bearish crossover (EMA 21 crosses below EMA 55) →   🍁 Red cloud = Bearish trend   🔽 A small bear triangle appears above the candle 📌 Good to know: 📍No auto buy/sell signals — visual tool only 📍Ideal for use with trendlines, RSI, or market structure 📍Cloud and signal arrows are plotted exactly at crossover moment 👣 Follow The Degen Company on Twitter and TradingView 📅 Released: May 2025 🔒 © 2025 The Degen Company — All rights reserved.
Pine Script® indicator
by TheDegenCompany
MACD-V with Volatility Normalisation [DCD]MACD-V with Volatility Normalisation This indicator is a modified version of the traditional MACD, designed to account for market volatility by normalizing the MACD line using the Average True Range (ATR). It provides a more adaptive approach to identifying momentum shifts and potential trend reversals. This indicator was developed by Alex Spiroglou in this paper: Spiroglou, Alex, MACD-V: Volatility Normalised Momentum (May 3, 2022). Features: Volatility Normalization: The MACD line is adjusted using ATR to standardize its values across different market conditions. Customizable Parameters: Users can adjust the MACD fast length, slow length, signal line smoothing, and ATR length to suit their trading style. Histogram Visualization: The histogram highlights the difference between the MACD and signal lines, with customizable colors for positive and negative momentum. Crossover Signals: Green and red dots indicate bullish and bearish crossovers between the MACD and signal lines. Background Highlighting: The chart background changes to green when the MACD is above 0 and red when it is below 0, providing a clear visual cue for bullish and bearish conditions. Horizontal Levels: Dotted horizontal lines are plotted at key levels for better visualization of MACD values. How to Use: Look for crossovers between the MACD and signal lines to identify potential buy or sell signals. Use the histogram to gauge the strength of momentum. Pay attention to the background color for quick identification of bullish (green) or bearish (red) conditions. This indicator is ideal for traders who want a more dynamic MACD that adapts to market volatility. Customize the settings to align with your trading strategy and timeframe.
Pine Script® indicator
by DutchCryptoDad
1
Swing Trading PRO - Moving averages + RSIWhat the Lines Mean ? Orange Line (Fast EMA) = 20-period Exponential Moving Average Blue Line (Slow EMA) = 50-period Exponential Moving Average These are used to determine market trend: If orange (EMA 20) is above blue (EMA 50) → Market is in an uptrend If orange is below blue → Market is in a downtrend Use on 4H or Daily timeframe for swing trades Avoid using in sideways/choppy markets (when the EMAs are close together or crossing repeatedly) Combine with support/resistance or Fibonacci retracements for more precise exits
Pine Script® indicator
by mkukulski2277c
3
IU Inside out candlestick patternIU Inside Out Candlestick Pattern This indicator identifies the Inside Out Candlestick Pattern — a unique 3-bar price action setup that captures strong market momentum and potential reversals with greater reliability than traditional patterns. Pattern Logic: The Inside Out pattern builds upon a classic engulfing setup by adding a breakout confirmation, making it a refined and filtered approach to candlestick analysis. Bullish Inside Out Logic: - Bar must be a bullish engulfing candle (engulfs previous bearish candle). - Current bar must be bullish and must close above the high of the engulfing candle (a bullish breakout). - When this setup is confirmed, a shaded green box is drawn around the range of the engulfing candle and its preceding bar. Bearish Inside Out Logic: - Bar must be a bearish engulfing candle (engulfs previous bullish candle). - Current bar must be bearish and must close below the low of the engulfing candle (a bearish breakdown). - When confirmed, a red box highlights the zone formed by the engulfing candle and its prior bar. Why this is unique: Unlike conventional candlestick indicators that trigger signals immediately after an engulfing pattern, this script adds a breakout condition to validate follow-through strength. This reduces false positives and gives traders a clearer edge. The pattern is also rare, which means it captures strong, decisive moves when it does appear. How users can benefit: - High-quality entries: Only shows patterns with proven follow-through, improving trade timing. - Visual clarity: Boxes and labels highlight significant price zones for easy interpretation. - Flexible use: Applicable across timeframes and instruments — ideal for both intraday and swing traders. - Alerts included: Real-time alerts help traders stay updated without staring at charts all day. This script is a powerful tool for price action traders looking to enhance pattern reliability and signal strength through structure-based breakout confirmation.
Pine Script® indicator
by Shivam_Mandrai
Volumetric Tensegrity🧮 Volumetric Tensegrity unifies two of the Leading Indicator suite's critical engines —  ZVOL  ( volume anomaly detection ) and  OBVX  ( directional conviction ). Originally designed as a structural economizer for traders navigating strict indicator limits (e.g. < 10 slots per chart), it was forced to evolve beyond that constraint simply to fulfill it, albeit with a difference. The fatal flaw of traditional fusion, where two metrics are blended mathematically, is that they lose scale integrity (i.e. meaning). VTense encodes  optical tensegrity  to scale the amplitude of the ZVOL histogram and the slope of the OBVX spread independently, so that expansion and direction may coexist without either dominating the frame. 🧬 Tensegrity , by definition, is an intelligent design principle where elements in compression are suspended within a network of continuous tension, forming a stable, self-supporting structure . Originally conceived in esoteric biomorphology (c.f. Da Vinci, Snelson, Casteneda), tensegrity balances force through opposition, not rigidity. Applied to financial markets,  Volumetric Tensegrity  captures this same principle: price compresses, volume expands, conviction builds or fades — yet structure holds through the interplay. The result is not a prediction engine, but a pressure field — one that visualizes where structure might bend, break, or rebound based on how volume breathes. 🗜️ Rather than layering multiple indicators and consuming precious chart space, VTense frees up room for complementary overlays like momentum mapping, liquidity tiers, or volatility phase detection — making it ideal for modular traders operating in tight technical real estate. 🧠 Core Logic - VTense separates and preserves two essential structural forces: • ZVOL Histogram : A Z-score-based expansion map that measures current volume deviation from its historical average. It reveals buildup zones, dormant stretches, and breakout pressure — regardless of price behavior. • OBVX Spread : A directional conviction curve that tracks the difference between On-Balance Volume and its volume-weighted fast trend. It shows whether the crowd is leaning in (accumulation/distribution) or backing off. 🔊 ZVOL controls the amplitude of the histogram, while OBVX controls the curvature and slope of the spread. Without sacrificing breathing behavior or analytical depth, VTense provides a compact yet dynamic lens to track both expansion pressure and directional bias within a single footprint. 🌊 Volumetric Tensegrity forecasts breakout readiness, trend fatigue, and compression zones by measuring the volatility within volume . Unlike traditional tools that track volatility of price, this indicator reveals when effort becomes unstable — signaling inflection points  before  price reacts. Designed to decode rhythm shifts at the volume level, it operates as a pre-ignition scanner that thrives on low-timeframe charts (15m and under) while scaling effectively to 1H for validation. 🪖 From Generals to Scouts 👀 When used jointly,  ZVOL + OBVX  act as the general : deep-field analysts confirming stress, commitment, or exhaustion. VTense , by contrast, functions as a  scout  — capturing subtle buildup and alignment before structure fully reveals itself. The indicator aims to be a literal vanguard, establishing a position that can be confirmed or flexibly abandoned when the higher authority arrives to evaluate. 🥂 Use the ZVOL + OBVX pair when : • You need independent axis control and manual dissection • You’re building long-form confluence setups • You have more indicator slots than you need 🔎 Use VTense when : • You need compact clarity across multiple instruments • You’re prioritizing confluence _detection_ over granular separation • You’re building efficient multi-layered systems under slot constraints 🏗️ Structural Behavior and Interpretation 🫁 Z VOL Respiration Histogram : Structural Effort vs Baseline 🔵  Compression Coil  – volume volatility is low and stable; the market is coiling 🟢  Steady Rhythm  – volume is healthy but unremarkable; balanced participation 🟡  Passive/Absorbed Effort  – expansion failing to manifest; watch for reversal 🟠  Clean Expansion  – actionable volatility rise backed by structure 🔴  Volatile Blowout  – chaos, climax; likely end-phase or fakeout ⚖️ ZVOL Respiration measures how hard the crowd is pressing — not just that volume is rising, but how statistically  abnormal the surge is. Because it is rescaled proportionally to OBVX, the amplitude of the histogram reflects structural urgency without overwhelming the visual field. 🖐️ OBVX Spread : Real-Time Directional Conviction Behind Price Moves 🔑 The curvature of the spread reveals not just directional bias but  crowd temp o: sharp slopes = urgent transitions; gradual slopes = building structural shifts. Curvature is key: sharp OBVX slope = urgency; gentle arcs = controlled drift or indecision. • Green Rising : Accumulation — upward pressure from real buyers • Red Falling : Distribution — sell pressure, downward slope • Flat Curves : Transitional → uncertainty, microstructure digestion 🎭 Synchronized vs Divergent Behavior ⏱️ Synchronized (high-confluence) : often precedes structural breakouts, with internal conviction clearly visible before price resolves. • ZVOL expands (yellow/orange/red) and OBVX climbs steeply green = strong bullish pressure • ZVOL expands while OBVX steepens red = growing sell-side intent 🪤 Divergent (conflict tension) : flags potential traps, fakeouts, and liquidity sweeps. • ZVOL expands sharply, but OBVX flattens or opposes → reactive expansion without crowd commitment ⛔️ Latent Drift + Structural Holding Patterns : tensegrity in action — the market holds tension without directional release. • ZVOL compresses (blue) + OBVX meanders near zero → structure is resting, building up energy • After prolonged drift, expect violent asymmetry when balance finally breaks 📚 Phase Interpretation: Dynamic Structural Read • 1️⃣ Quiet Coil : Histogram flat, OBVX flat → no urgency • 2️⃣ Initial Pulse : Yellow bars, OBVX slope builds → actionable tension • 3️⃣ Structural Breath : Synchronized expansion and slope → directional commitment • 4️⃣ Disagreement : Spike in ZVOL, flattening OBVX → exhaustion risk or false signal 💡 Suggested Use • Run on 15m charts for breakout anticipation and 1H for validation • Pair with ZVOL + OBVX to confirm crowd conviction behind the tension phase • Use as a rhythm filter for the suite's trend indicators (e.g., RDI , SUPeR TReND 2.718 , et. al.) • Ideal during low-volume regimes to detect pressure buildup before triggers 🧏🏻 Volumetric Tensegrity doesn’t signal. It  breathes , and listens to pressure shifts before they speak in price. As a scout, it lets you see structural posture before signals align — helping you front-run resolution with clarity, not prediction.
Pine Script® indicator
by TheLeadingIndicator
1
Fibonacci - RSI OscillatorIndicator Overview The Fibonacci RSI Oscillator calculates the Relative Strength Index (RSI) based on a dynamically adjusting level derived from recent price action and a fixed Fibonacci ratio (0.236). This differs from standard RSI, which is calculated directly on the closing price. The objective is to measure momentum relative to a level that adapts to recent peaks and valleys. Core Calculation Mechanism Peak/Valley Tracking: The script identifies the highest high (state_peak) and lowest low (state_valley) since the last detected change in short-term directional bias (state_dir). Dynamic Level Calculation: A level (state_dyn_level) is calculated using a fixed 0.236 Fibonacci ratio relative to the tracked peak and valley: If bias is up: state_dyn_level = state_peak - (state_peak - state_valley) * 0.236 If bias is down: state_dyn_level = state_valley + (state_peak - state_valley) * 0.236 This level adjusts automatically when a new peak or valley is established in the current directional bias. If price crosses the dynamic level against the current bias, the bias flips, and the level recalculates. Optional Source Smoothing: The calculated state_dyn_level can optionally be smoothed using a user-selected moving average (SMA, EMA, WMA, HMA, RMA) before the RSI calculation. RSI Calculation: The standard RSI formula is applied to the (optionally smoothed) state_dyn_level series to produce the primary oscillator value (val_primary_osc). Signal Line: A moving average (type and length configurable) is calculated on the val_primary_osc to generate the val_sig_line. Key Features & Components Dynamic Fibonacci Level: The core input for the RSI calculation, based on recent peaks/valleys and the 0.236 ratio. Fibonacci Level RSI: The primary oscillator line representing the RSI of the dynamic level. Signal Line: A moving average of the primary RSI line. Overbought/Oversold Levels: User-defined threshold lines. Optional Source Smoothing: Configurable MA smoothing applied to the dynamic level before RSI calculation. Gradient RSI Color : Option to color the primary RSI line based on its value relative to OB/Mid/OS levels. Zone & OB/OS Fills: Visual fills for the 0-50 / 50-100 zones and specific fills when the RSI enters OB/OS territory. Background Gradient: Optional vertical background color gradient based on the RSI's position between 0 and 100. Configurable Parameters: Inputs for lengths, MA types, OB/OS levels, colors, line widths, and feature toggles. Visual Elements Explained Fibonacci Level RSI Line: The main plotted oscillator (color/gradient/width configurable). Signal Line: The moving average of the RSI line (color/width/MA type configurable). OB/OS Lines: Horizontal lines plotted at the set OB/OS levels (color/width configurable). Mid-Line (50): Horizontal line plotted at 50 (color/width configurable). Zone Fills: Background fill between 0-50 and 50-100 (colors configurable). Conditional fill between the RSI line and the 50 line when RSI > OB level or RSI < OS level (colors configurable). Background Gradient: Optional background coloring where transparency varies vertically with the RSI level (base colors and transparency range configurable). Configuration Options Users can adjust the following parameters in the indicator settings: Smoothing: Enable/disable dynamic level smoothing; set length and MA type. RSI: Set the RSI calculation length. Signal Line: Set the signal line smoothing length and MA type. Levels: Define Overbought and Oversold numeric thresholds. Visuals: Configure colors and widths for the RSI line, signal line, OB/OS lines, mid-line, zone fills, and OB/OS fills. Gradients: Enable/disable and configure colors for the RSI line gradient; enable/disable and configure colors/transparency for the background gradient. Interpretation Notes The oscillator reflects the momentum of the dynamic Fibonacci level, not directly the price. Divergences, OB/OS readings, and signal line crossovers should be interpreted in this context. The behavior may differ from standard RSI, potentially offering a smoother output or highlighting different momentum patterns depending on market structure and volatility. As with any indicator, signals should be used in conjunction with other analysis methods and risk management practices. It is not designed as a standalone trading system. Risk Disclaimer: Trading involves significant risk. This indicator is provided for analytical purposes only and does not constitute financial advice. Past performance is not indicative of future results. Use sound risk management practices and never trade with capital you cannot afford to lose.
Pine Script® indicator
by sizzlinsoft
1
Support/Resistance Breakout DetectorThis indicator automatically detects and plots dynamic support and resistance levels using pivot highs and lows. ✅ It draws red resistance lines and blue support lines, ✅ The lines extend forward but automatically stop when the price touches them, ✅ It monitors for breakouts with strong volume, ✅ When a breakout happens, it shows labels like “B” or “Bull Wick” / “Bear Wick” on the chart, ✅ It also triggers alerts when support or resistance breaks with high volume. Main settings: Pivot lookback period Show/hide breakout labels Minimum volume for breakout Maximum extension length for lines This tool helps traders easily spot key price levels and watch for meaningful breakouts.
Pine Script® indicator
by Chart_Guide
TJR Liquidity mark-out indicatorIndicator Description: This custom Pine Script indicator is designed to mark highs and lows based on a simple candle pattern recognition system, ideal for traders using TJR's Strategy or any strategy focused on liquidity. The indicator marks out key levels where the price has not yet taken out liquidity. Specifically, it looks for price patterns where there is: A bullish candle followed by a bearish candle (marking a potential high). A bearish candle followed by a bullish candle (marking a potential low). Once these highs and lows are identified, lines are drawn extending to the right until price sweeps the level — that is, when the price breaks above a high or below a low, the line is deleted. This makes the indicator highly useful for liquidity-based strategies where the goal is to spot unfilled liquidity zones (i.e., levels where price has not yet reached). The indicator is especially beneficial for traders who: Use TJR's Strategy, which typically involves identifying market structure shifts and liquidity zones. Focus on liquidity pools and want to visualize areas where the market could potentially "sweep" or revisit to grab liquidity before continuing its movement. By showing these areas where the liquidity hasn't been taken out yet, this indicator allows traders to better time their entries and exits, helping them align with areas of unfilled liquidity in the market. It’s a great addition for those looking to trade near key liquidity zones or manage risk based on market structure shifts. Key Features: Marks Liquidity Zones: Detects potential liquidity areas based on candle patterns. Dynamic Lines: Lines extend to the right and disappear once price sweeps them. Perfect for TJR's Strategy: Aligns with liquidity-focused strategies. Customizable: Choose time periods, colors, and line length for personalized settings. Real-time Updates: Continuously updates as new candles form, ensuring you have the latest liquidity data.
Pine Script® indicator
by Lumiere-Stocks
2
Multi-Symbol Trend DashboardMulti-Symbol Trend Dashboard - MA Cross Trend Monitor Short Description A customizable dashboard that displays trend direction across multiple symbols and timeframes using moving average crossovers. Full Description Overview This Multi-Symbol Trend Dashboard allows you to monitor trend direction across 7 different symbols and 5 timeframes simultaneously in a single view. The dashboard uses moving average crossovers to determine trend direction, displaying bullish trends in green and bearish trends in red. Key Features Multi-Symbol Monitoring : Track up to 7 different trading instruments at once Multi-Timeframe Analysis: View 5 different timeframes simultaneously for each instrument Customizable Moving Averages: Choose between SMA, EMA, or WMA with adjustable periods Visual Clarity: Color-coded cells provide immediate trend identification Flexible Positioning: Place the dashboard anywhere on your chart Customizable Appearance: Adjust sizes, colors, and text formatting How It Works The dashboard calculates a fast MA and slow MA for each symbol-timeframe combination. When the fast MA is above the slow MA, the cell shows green (bullish). When the fast MA is below the slow MA, the cell shows red (bearish). Use Cases Get a bird's-eye view of market trends across multiple instruments Identify potential trading opportunities where multiple timeframes align Monitor your watchlist without switching between charts Spot divergences between related instruments Track market breadth across sectors or related instruments Notes and Limitations Limited to 7 symbols and 5 timeframes due to TradingView's security request limits Uses simple MA crossover as trend determination method Dashboard is most effective when displayed on a dedicated chart Performance may vary on lower-end devices due to multiple security requests Settings Explanation MA Settings: Configure the periods and types of moving averages Display Settings: Adjust dashboard positioning and visual elements Trading Instruments: Select which symbols to monitor (defaults to major forex pairs) Timeframes: Choose which timeframes to display (default: M15, H1, H4, D1, W1) Colors: Customize the color scheme for bullish/bearish indications and headers This dashboard provides a straightforward way to maintain situational awareness across multiple markets and timeframes, helping traders identify potential setups and market conditions at a glance.
Pine Script® indicator
by CognitiveAlpha
1
Half Supertrend [NLR]While the Supertrend is a popular tool, traders often face the challenge of false signals and uncertain entry points. The Half Supertrend indicator addresses these shortcomings by introducing a dynamic mid-level , offering a significantly improved way to identify true trend strength and potential high-probability entries. Here's how the mid-level enhances your trend analysis: Filter Out Noise: Instead of reacting to every Supertrend flip, the mid-level helps you identify the strength of the trend. Price moving strongly away from the mid-level confirms a higher conviction move. Identify Optimal Pullback Entries: Waiting for price to pull back to the dynamic mid-level after a Supertrend direction change can provide better entry prices and potentially higher probability setups, capitalizing on established momentum. This approach helps avoid entering prematurely on weaker signals. Gain Deeper Trend Insight: The position of the price relative to both the Supertrend line and the mid-level paints a clearer picture of the current trend's strength and potential for continuation or reversal. Here's the technical edge you've been waiting for: Enhanced Trend Confirmation: This indicator plots a mid-level derived from half the Average True Range (ATR) multiple, acting as a crucial intermediary for assessing trend strength. Intra-Trend Strength Analysis: Price above/below the mid-level: Indicates a strong trending move aligned with the Supertrend direction. Price between the mid-level and the Supertrend line: Suggests a weaker trend and a higher probability of consolidation or reversal. Early Reversal Detection: Price crossing the mid-level can serve as an early warning signal of a potential trend change. Higher Timeframe Clarity: The user-configurable higher timeframe (HTF) input provides a robust, multi-timeframe trend bias. Dynamic Entry Levels: Potential entry levels based on the mid-level are plotted for visual guidance. Clear Visual Representation: Color-coded lines and filled areas simplify trend and strength assessment. How it works under the hood: This indicator utilizes the standard Supertrend calculation on the chosen higher timeframe, incorporating the Average True Range (ATR) to determine volatility-adjusted bands. The unique addition is the "half trend" line, calculated by adding or subtracting half of the ATR-based trailing stop value from the Supertrend line. This mid-level acts as a crucial intermediary zone for evaluating the conviction of the current trend. // Calculate the mid-level line half_line = supertrend + (atr * half_factor) Key Input Parameters: ATR Length: Determines the period for calculating the Average True Range (default: 10). Factor: The multiplier applied to the ATR to determine the Supertrend band width (default: 3). The mid-level dynamically adjusts based on half of this factor. Timeframe: Allows you to select a higher timeframe for the Supertrend calculation, providing a broader trend context. Up Color/Down Color: Customize the colors for uptrend and downtrend indications.
Pine Script® indicator
by NonLinearRookie
Aggregated Open Interest [Alpha Extract]The Aggregated Open Interest indicator provides a comprehensive view of open interest across multiple cryptocurrency exchanges, allowing traders to monitor institutional positioning and market sentiment. By aggregating data from major exchanges like Binance, BitMEX, and Kraken, this indicator offers valuable insights into potential price movements and market shifts. 🔶 CALCULATION The indicator processes open interest data through multiple analytical methods: Exchange Aggregation: Collects and normalizes open interest data from multiple exchanges (Binance, BitMEX, Kraken) with proper currency normalization. Multi-Mode Analysis: Calculates various metrics including raw open interest values, OI change, OI delta, volume-weighted delta, and OI RSI. Divergence Detection: Uses pivot point analysis to identify divergences between price action and open interest movements. Activity Assessment: Tracks bullish and bearish activity patterns by correlating open interest changes with price movements. Formula: Aggregate OI = Sum of normalized open interest from selected exchanges OI Change = Current OI - Previous OI OI Delta = Net change in open interest across timeframes OI Delta × Volume = OI Delta weighted by relative volume OI RSI = Relative Strength Index applied to open interest values OI Heatmap = Multi-timeframe visualization of OI changes across 7 distinct periods 🔶 DETAILS Visual Features: Open Interest: Candlestick representation of aggregated open interest OI Change: Histogram showing period-to-period changes OI Delta: Histogram displaying net OI movements OI Delta × Volume: Volume-weighted OI delta for enhanced signals OI RSI: Oscillator showing overbought/oversold OI conditions OI Heatmap: Multi-timeframe visualization showing OI changes across 7 periods (3, 5, 8, 13, 21, 34, and 55 days) Divergence Detection: Color-coded markers (teal for bullish, red for bearish) highlighting significant divergences between price and open interest Analysis Table: Real-time summary of key metrics including aggregate OI, recent changes, and bullish/bearish activity. Interpretation: Increasing Open Interest + Rising Price: Strong bullish trend confirmation Increasing Open Interest + Falling Price: Strong bearish trend confirmation Decreasing Open Interest + Rising Price: Weak bullish trend (potential reversal) Decreasing Open Interest + Falling Price: Weak bearish trend (potential reversal) Divergences: Signal potential trend exhaustion and reversals when price moves in one direction while open interest moves in the opposite direction Heatmap: Provides at-a-glance insight into open interest trends across multiple timeframes, with green bars indicating rising OI and red bars indicating falling OI 🔶 EXAMPLES Trend Confirmation: Rising open interest accompanying a price increase confirms strong bullish momentum with institutional backing. Example: During January-February 2025, rising OI during price advances confirms institutional participation in the uptrend. Bearish Divergence: Price makes a higher high while open interest makes a lower high, signaling potential trend reversal. Example: Red markers appear at market tops where price continues higher but open interest fails to confirm, preceding significant corrections. Bullish Divergence : Price makes a lower low while open interest makes a higher low, indicating potential bottoming. Example: Teal markers appear at market bottoms where price continues lower but open interest fails to confirm, preceding significant rallies. OI Heatmap Analysis : Multiple timeframes showing consistent red signals across short to long-term periods indicate strong institutional selling pressure. Example: When all 7 periods (3-55 days) show red during a price uptrend, this signals institutional selling into retail strength, often preceding major corrections. 🔶 SETTINGS Customization Options: Data Sources: Toggle different exchanges (Binance USDT/USD/BUSD, BitMEX USD/USDT, Kraken USD) Display Mode: Choose between Open Interest, OI Change, OI Delta, OI Delta × Volume, OI RSI, and OI Heatmap Currency Units: Display in USD or base cryptocurrency (COIN) Analysis Tools: Moving Average (length and color), RSI (length and color) Divergence Detection: Enable/disable signals, adjust lookback period and threshold percentage, customize bullish/bearish divergence colors OI Heatmap Colors: Customize bullish (green) and bearish (red) signal colors for the multi-timeframe heatmap visualization The Aggregated Open Interest indicator provides traders with comprehensive insights into institutional positioning across major exchanges, helping identify potential trend continuations, reversals, and key market turning points driven by smart money movements. The addition of the OI Heatmap feature enables traders to quickly visualize open interest trends across multiple timeframes, providing valuable context for institutional positioning over different market cycles.
Pine Script® indicator
by AlphaExtract
TJR's BOS strategyBreak of Structure (BOS) Indicator: TJR version This Break of Structure (BOS) Indicator helps you identify key market shifts by highlighting breaks in market structure. It uses price action to spot significant swing highs and swing lows and draws horizontal lines that extend to the right whenever a BOS occurs. Features: Real-Time Updates: The indicator continuously updates in real time, marking BOS points as they occur. BOS Lines: Bullish Break of Structure (BOS): Occurs when the price closes above a previously established high. Bearish Break of Structure (BOS): Occurs when the price closes below a previously established low. Customizable: Easily change the color and line length of the BOS markers to suit your charting preferences. Max Lines Control: Limit the number of BOS lines shown in both upward and downward directions to keep the chart clean. Visual Clarity: Lines are drawn directly on the high or low levels, marking clear BOS zones on the chart for easy identification. How to Use: BOS Up: A bullish BOS is marked when the price closes above a previously marked high. BOS Down: A bearish BOS is marked when the price closes below a previously marked low. Trend Direction: This indicator can be particularly useful for traders following trend continuation or reversal strategies, as BOS points represent key areas where market sentiment shifts. Custom Settings: Change the color of BOS lines for better visibility. Adjust the maximum number of BOS lines to display.
Pine Script® indicator
by Lumiere-Stocks
1