Get started

Signals

Directional Flow Signals Directional Flow Signals is a DMI-based trend direction indicator designed to highlight shifts in directional pressure directly on the price chart. The indicator uses the Directional Movement Index system, comparing DI+ and DI- to determine which side of the market is currently dominant. When DI+ is above DI-, candles are colored bullish. When DI- is above DI+, candles are colored bearish. A Long signal appears when directional control shifts from bearish to bullish. A Short signal appears when directional control shifts from bullish to bearish. This allows traders to quickly visualize changes in directional bias without needing to keep a separate DMI/ADX panel open. Key features: - Bullish and bearish candle coloring - Long and Short signal labels - DI+ / DI- crossover-based trend shifts - Built-in alert conditions - Adjustable DMI length and smoothing - Custom candle colors This tool can be useful for identifying directional transitions, trend bias changes, and possible momentum shifts when combined with support/resistance, volume, VWAP, market structure, or higher timeframe confirmation. Important: This indicator does not predict price movement and should not be used as a standalone trading system. Since the signals are based on DI+ and DI- crossovers, they may produce false signals during sideways or low-volatility market conditions. Inputs: Show BUY/SELL Signals: Allows users to enable or disable Long and Short labels on the chart. ADX Length: Controls the lookback period used for the Directional Movement Index calculation. ADX Smoothing: Controls the smoothing applied to the ADX/DMI calculation. Up Candle Color: Sets the candle color when DI+ is stronger than DI-. Down Candle Color: Sets the candle color when DI- is stronger than DI+. Directional Flow Signals is a visual trend-bias indicator based on the Directional Movement Index. The script compares DI+ and DI- to determine whether bullish or bearish directional pressure is dominant. Candles are colored according to the active directional bias, and signal labels are displayed when the dominant side changes. Signal logic: Long Signal: A Long signal is generated when DI+ becomes stronger than DI- after previously being below it. Short Signal: A Short signal is generated when DI- becomes stronger than DI+ after previously being below DI+. The goal of this indicator is not to predict reversals, but to provide a clear visual representation of directional pressure shifts. It is best used as a confirmation layer together with price structure, volume, VWAP, support/resistance, or higher timeframe trend analysis. Limitations: - Signals are based only on DI+ and DI- dominance. - The ADX value is calculated but not used as a strength filter. - False signals may occur in ranging or choppy markets. - The indicator does not provide stop loss, take profit, or risk management levels. - It should be used as a confirmation or visual bias tool, not as a complete trading system.
Pine Script® indicator
by Ty_yanse
Meridian Stochastic Regime Suite [JOAT]Meridian Stochastic Regime Suite Introduction Meridian Stochastic Regime Suite is an open-source adaptive oscillator built for traders who want more context than a standard stochastic line can provide. The script combines a centered stochastic engine, an adaptive response model, and a regime profile so the oscillator changes character as the market shifts between trend, compression, expansion, and balance. The problem Meridian solves is signal quality. Standard oscillators often look clean, but they do not explain whether momentum is occurring inside a compressed market, an expanding breakout phase, or a stable trend. Meridian adds that context directly into the oscillator architecture so the same reading can be interpreted differently depending on the active regime profile. Core Concepts 1. Centered stochastic architecture Price is pre-smoothed first, then converted into a stochastic reading that is centered around 50 so directional pressure is easy to interpret: smoothHigh = ta.ema(high, priceSmoothLen) smoothLow = ta.ema(low, priceSmoothLen) smoothClose = ta.ema(close, priceSmoothLen) rawStoch = 100.0 * (smoothClose - ta.lowest(smoothLow, stochLen)) / stochRange 2. Adaptive response engine The main oscillator does not use static smoothing alone. Its response speed and gain expand or contract based on the regime profile: gainBias = gainBase + trendScore * 0.38 + expansionScore * 0.18 - compressionScore * 0.12 speedBias = responseBase + trendScore * 0.08 + expansionScore * 0.04 adaptiveOsc := adaptiveOsc + speedBias * (adaptiveSeed - adaptiveOsc ) This helps the oscillator respond differently in directional and compressed conditions. 3. Embedded regime scoring Meridian computes four internal state scores: Trend Compression Expansion Balance Those scores are derived from ATR behavior, path efficiency, and slope strength, then normalized into a regime profile shown in the dashboard. 4. Spread and signal layer The script compares the adaptive oscillator to a slower signal line and visualizes the spread around the neutral axis. This gives a direct view of acceleration versus drag. 5. Institutional oscillator panel The panel uses restrained zones, layered fills, and a top-right dashboard instead of loud markers. The result stays readable while still carrying multiple analytical dimensions. Features Centered stochastic core: Keeps the oscillator readable around a neutral midpoint Adaptive response model: Gain and speed shift with the internal regime profile Four-state regime map: Trend, Compression, Expansion, and Balance Fast line and signal line: Shows momentum acceleration versus stabilization Spread shading: Highlights when the adaptive oscillator is separating from the signal line Regime dashboard: Displays state, confidence, adaptive reading, signal reading, and regime profile shares Confirmed-bar flips: Internal state transitions are tracked on closed bars Non-repainting design: Uses only current-timeframe data and no future references Input Parameters Stochastic Core: Price Pre-Smoothing Stochastic Length Fast Smoothing Adaptive Signal Smoothing Regime Filter: Regime Window ATR Window Base Oscillator Gain Base Response Speed Visual Output: Show Adaptive Zones Show Centered Fast Line How to Use This Indicator Step 1: Start with the regime Read the dashboard first. Trend and Expansion regimes support directional interpretation. Compression and Balance call for more caution. Step 2: Watch adaptive versus signal spread When the adaptive line separates cleanly from the signal line, momentum is strengthening. When the spread compresses, the move is losing urgency. Step 3: Use the centered fast line as timing context The fast line helps show whether short-term momentum is leading or lagging the adaptive engine. Step 4: Avoid isolated readings Meridian is strongest when used alongside a structure or value-based tool rather than as a standalone trade trigger. Indicator Limitations Like all oscillators, Meridian can remain elevated or depressed during strong directional trends Compression states may delay re-acceleration readings until volatility expands again The regime profile is descriptive, not predictive Originality Statement Meridian Stochastic Regime Suite is original in how it embeds a four-state regime profile directly into the adaptive behavior of a centered stochastic engine. It is published because: The oscillator response changes with internal market-state measurements instead of using only fixed smoothing The script surfaces trend, compression, expansion, and balance as percentages inside the same panel The panel and dashboard design turn regime context into an interpretable momentum framework rather than a generic stochastic clone Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice or a recommendation to trade. Oscillator readings can remain extreme for extended periods, and regime classifications can shift as conditions evolve. Always use independent judgment and proper risk management.
Pine Script® indicator
by officialjackofalltrades
Elaris RSI Pro [Divergence]Elaris RSI Pro is a professional-grade RSI momentum and divergence indicator built for traders who want cleaner market structure signals, smarter divergence detection, and a more refined trading workflow. The indicator combines a responsive RSI engine with advanced bullish and bearish divergence detection to help identify potential reversals, continuation setups, and momentum shifts across all market conditions. Designed with a clean visual experience and optimized performance in mind, Elaris RSI Pro delivers clear signals without unnecessary chart clutter, making it suitable for scalpers, swing traders, and intraday traders alike. Key Features: • Regular Bullish & Bearish Divergence Detection • Hidden Bullish & Bearish Divergence Detection • Configurable Pivot Detection Engine • Adjustable Minimum & Maximum Pivot Distance Filters • Dynamic RSI Momentum Coloring • Signal Smoothing with EMA Filter • Overbought / Oversold Zone Visualization • Optional Divergence Lines & Labels • Optional Pivot Markers for Advanced Analysis • Professional Alert Conditions • Non-Repainting Confirmed Pivot Logic • Optimized Object Management for Better Performance Elaris RSI Pro is built using confirmed pivot logic, meaning divergence signals are generated only after pivot confirmation to reduce repainting behavior and improve signal reliability. The indicator is highly customizable, allowing traders to adapt the sensitivity and visual behavior to different trading styles, markets, and timeframes. Works well with: • Market Structure Analysis • Trend Following Systems • Support & Resistance Trading • Smart Money Concepts (SMC) • Liquidity Sweep Confirmation • Multi-Timeframe Confluence Strategies Best used alongside proper risk management and confirmation tools. Non-Repainting: This indicator uses confirmed pivot-based calculations. Signals appear only after pivot confirmation and do not repaint historically after confirmation.
Pine Script® indicator
by ElarisGroup
Tension Flow Trend [BigBeluga] - Historical RRTension Flow Trend is a high-performance trend-following framework that treats price action like a reactive elastic system. By moving beyond static averages, this indicator introduces "Price Tension"—a sophisticated measurement of how overstretched a trend is relative to its baseline—now enhanced with a live Historical RR (Risk:Reward) backtesting engine. By combining the ultra-low-lag properties of the Hull Moving Average (HMA) with real-time Z-Score volatility analysis, this indicator visualizes not just the direction of the market, but the mathematical "exhaustion" of every move. 🔵 THE ELASTICITY FRAMEWORK The Ultra-Responsive HMA Baseline: At the heart of the system is a 50-period Hull Moving Average. Specifically engineered to eliminate the lag found in traditional SMAs, the HMA provides a "true north" that reacts instantly to structural shifts without the usual delay. Price Tension (Z-Score Engine): The indicator measures the vertical distance between price and the HMA, normalizing it using standard deviation. This Z-Score represents the "Tension" of the trend—showing you exactly when the market has deviated too far from its mean. Dynamic Transparency Feedback: As price enters an extreme Z-Score range, the trend ribbon’s transparency increases. A bright, solid ribbon indicates compressed, high-probability energy, while a fading ribbon warns that the "elastic band" is stretched to its limit. 🔵 PERFORMANCE & RISK INTELLIGENCE Automated RR Projection: Upon every "START" signal, the script automatically plots dynamic Risk:Reward boxes. It calculates an ATR-based stop loss and projects a take-profit target based on your custom RR ratio, visualizing the trade's path in real-time. Rolling Performance Tracker: The indicator features a built-in backtester that tracks the win/loss history of the most recent trades. It calculates your Win Rate based on a rolling sample size, allowing you to see how the strategy is performing under current market conditions. Signal Cooldown Logic: To eliminate "whipsaw" noise, a configurable cooldown engine ensures that signals only trigger during significant structural shifts. This prevents signal clustering in sideways or choppy markets. 🔵 DUAL-DASHBOARD SYSTEM Energy Monitor (Bottom-Right): Tracks the numerical Z-Score and categorizes the market status. "Strong" indicates healthy momentum, while "Overextended" warns of an imminent mean-reversion risk. RR Performance Table (Top-Right): Provides an institutional-grade breakdown of your strategy performance, including total Wins, Losses, and the current Win Rate percentage for the specified trade window. 🔵 STRATEGIC APPLICATION The Momentum Breakout: Look for "START" labels that appear when the HMA slope aligns with a price crossover. These represent the birth of a new trend cycle where tension is low and expansion is likely. Managing Trend Exhaustion: When the ribbon begins to fade and the Energy Dashboard hits "Overextended," it is time to tighten stops or take partial profits. High tension usually precedes a sharp snap-back to the baseline. Confirming with Win Rate: Use the Performance Dashboard to gauge market regime. If the rolling Win Rate is high, the market is respecting the trend envelopes; if it drops, the market may be entering a consolidation phase where you should wait for better alignment. Mean Reversion Targets: For contrarian traders, the HMA baseline serves as a natural "magnet." When price is significantly overextended, look for price to be pulled back into the HMA "Neutral Zone." Tension Flow Trend transforms your chart into a map of market stress and opportunity. By visualizing the tension behind every candle and providing real-time performance feedback, it ensures you stay on the right side of the trend while trading with professional-grade risk management.
Pine Script® indicator
by BigBeluga
7
Pulse Entry Engine🚀 Pulse Entry Engine Pulse Entry Engine is a free momentum-based entry visualization and decision-support indicator designed to help traders analyze potential entry conditions with a cleaner, more structured, and more visual workflow. This script combines a Special K-based momentum engine, signal modes, confirmation logic, EMA context, higher-timeframe bias filtering, modern oscillator visualization, signal strength scoring, star-based quality labels, TP/SL projection boxes, active-trade candle coloring, signal-candle background highlighting, compact dashboards, visual themes, and dynamic alerts into one organized TradingView tool. The goal of Pulse Entry Engine is not to predict the future or provide guaranteed buy/sell instructions. Its purpose is to help users visually study: ⚡ momentum expansion 🎯 entry-quality conditions 🧭 directional context 📊 signal strength 📦 projected TP/SL zones 🕯️ active-trade candle behavior 🚨 alert-based monitoring Pulse Entry Engine should be treated as a structured chart-analysis tool, not as financial advice, not as an automated trading system, and not as a guarantee of profitable results. ━━━━━━━━━━━━━━━━━━━━━━ 🔓 PUBLICATION NOTE ━━━━━━━━━━━━━━━━━━━━━━ This script is published as a free educational and visual market-analysis tool. The description is intentionally detailed because many users do not inspect every part of the Pine Script logic line by line. The purpose of this page is to explain: ✅ what the script does ✅ how the components work together ✅ what appears on the chart ✅ how signals are filtered ✅ how TP/SL projection works ✅ what the dashboards mean ✅ what the limitations are ✅ how the indicator should and should not be used Pulse Entry Engine is designed to support structured decision-making. It does not promise profitable results. It does not remove market risk. It does not execute trades. It should not be used as a blind buy/sell system. It is best used as a visual framework for reviewing momentum, signal quality, context, and projected risk/reward. ━━━━━━━━━━━━━━━━━━━━━━ 📌 OVERVIEW ━━━━━━━━━━━━━━━━━━━━━━ At a high level, Pulse Entry Engine does the following: 1. ⚙️ Calculates a Special K-based momentum engine. 2. 📈 Compares the engine value with its signal line. 3. 📏 Measures the distance between the engine and signal line. 4. 🔥 Classifies stretch conditions as Weak, Normal, Strong, or Extreme. 5. 🎯 Generates LONG / SHORT pulse signals when selected conditions align. 6. 🧠 Provides five different Signal Modes. 7. 🕯️ Supports Bar Close and Live Intrabar confirmation. 8. 📈 Includes an EMA-based context filter. 9. 🧭 Includes a Higher Timeframe Bias Filter. 10. ⭐ Calculates a 0–100 signal score. 11. 📊 Displays a Signal Strength Bar. 12. 🌟 Shows star-based quality labels on the main chart. 13. 🟩 Highlights the exact signal candle with a vertical background. 14. 🕯️ Colors candles only while a projected trade is active. 15. 📦 Displays ATR-based TP/SL projection boxes. 16. 🎯 Tracks TP1, TP2, TP3, and SL visually. 17. 🔒 Blocks new signals while an active projection has not reached TP1. 18. 🔁 Allows replacement logic after TP1/TP2 progress. 19. 🌊 Includes a modern oscillator visual engine. 20. 📊 Includes Neon Histogram as the default oscillator view. 21. 🎨 Includes multiple visual themes. 22. 🖥️ Includes Minimal / Pro / Full display profiles. 23. 📋 Includes a compact main dashboard. 24. 📡 Includes a compact live scanning panel. 25. 🚨 Includes standard and dynamic alert messages. This makes the script more than a simple oscillator or a basic signal marker. It is a complete visual entry-analysis framework built around momentum, context, signal quality, and projected trade structure. ━━━━━━━━━━━━━━━━━━━━━━ 🧠 CORE IDEA ━━━━━━━━━━━━━━━━━━━━━━ The core idea behind Pulse Entry Engine is simple: A potential entry should not be judged from one isolated condition. A single oscillator movement, one candle reaction, one stretched reading, or one signal label is usually not enough by itself. Market context matters. For that reason, Pulse Entry Engine combines several layers: ⚡ momentum engine direction 📏 distance and stretch expansion 🧭 zero-line context 📈 EMA context 🕰️ higher-timeframe bias ⭐ score requirement 🎛️ signal mode strictness 🕯️ confirmation timing 📦 TP/SL projection logic The indicator does not attempt to mark every possible move. Instead, it attempts to make momentum-based entry conditions easier to read, compare, and review. The purpose is not to create more signals. The purpose is to make signals more understandable. ━━━━━━━━━━━━━━━━━━━━━━ 🧩 WHY THIS SCRIPT IS NOT A SIMPLE BUY/SELL INDICATOR ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine is not intended to behave like a simple “buy here / sell here” script. It is built as a structured workflow: Pulse Engine → Distance / Stretch Detection → Signal Mode Filtering → Zero / EMA Context → HTF Bias Confirmation → Score Classification → Star-Based Signal Label → TP/SL Projection → Active Trade Visualization → Dashboard Review → Dynamic Alerts Each part has a specific role. ⚙️ The Pulse Engine measures momentum behavior. 📏 The distance logic identifies meaningful separation from the signal line. 🎛️ The signal modes adjust strictness. ⭐ The score system summarizes confluence strength. 🧭 The HTF filter adds broader directional context. 📊 The dashboard summarizes current conditions. 🌊 The oscillator visualizes momentum behavior. 📦 The TP/SL boxes provide a projected risk/reward structure. 🚨 The alert system helps monitor signals without constantly watching the chart. This makes the script a full review environment, not a one-condition signal tool. ━━━━━━━━━━━━━━━━━━━━━━ ⚙️ HOW THE SCRIPT WORKS ━━━━━━━━━━━━━━━━━━━━━━ 1) ⚡ PULSE ENTRY CORE Pulse Entry Engine uses a Special K-based calculation as its internal momentum engine. The engine produces two main values: • the main momentum engine value • the signal line The relationship between these two values forms the foundation of the signal logic. When the engine moves away from the signal line, the script measures the distance between them. That distance is then compared to its own recent average distance. This creates the Distance Ratio. The Distance Ratio helps the script understand whether the current movement is weak, normal, strong, or extreme compared to recent behavior. This is important because a raw distance between two lines may not mean much by itself. A distance becomes more meaningful when it is large compared to the engine’s recent average behavior. ━━━━━━━━━━━━━━━━━━━━━━ 📏 DISTANCE / STRETCH LOGIC ━━━━━━━━━━━━━━━━━━━━━━ The script calculates: 📌 current distance between engine and signal line 📌 average distance over the selected lookback 📌 distance ratio 📌 strong stretch threshold 📌 extreme stretch threshold The stretch state can be: 🟤 Weak 🔵 Normal 🟠 Strong 🟣 Extreme This stretch state appears in the dashboard. The stretch logic is one of the most important parts of the signal engine. A signal generally needs the engine distance to be strong enough according to the selected Signal Mode. This helps reduce reactions to small, random oscillator movements. ━━━━━━━━━━━━━━━━━━━━━━ 🎛️ SIGNAL MODES ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes five Signal Modes. These modes are not only visual names. They change internal signal thresholds, score requirements, and filtering behavior. Available modes: 🔥 Aggressive ⚖️ Balanced ⚡ Scalping 🌊 Swing 🛡️ Funded Account 🔥 Aggressive Aggressive mode is the earliest and most sensitive profile. It uses lower stretch requirements and a lower score threshold. This means it can produce more signals and may react faster to developing momentum conditions. Useful for: • testing • manual confirmation • fast scanning • active monitoring • traders who want more potential setups Important note: Because it is more sensitive, it may also produce more noise. ⚖️ Balanced Balanced mode is the default all-around profile. It uses the user-defined Distance Multiplier and Extreme Stretch settings. This mode is designed to provide a stable middle-ground behavior. Useful for: • general chart review • standard intraday analysis • balanced signal frequency • users who want neither too many nor too few signals ⚡ Scalping Scalping mode is designed for lower-timeframe active trading environments. It is faster than Balanced mode but stricter than Aggressive mode. Useful for: • M1 • M3 • M5 • fast intraday scanning • short-term chart review Scalping mode should still be used with context, risk control, and independent analysis. 🌊 Swing Swing mode is more selective. It requires stronger stretch and a higher score threshold. EMA and Zero filters are forced on for stricter directional context. Useful for: • larger market moves • higher timeframe review • slower trading style • fewer but more filtered signals 🛡️ Funded Account Funded Account mode is the strictest profile. It requires the strongest internal confirmation among the available modes. EMA and Zero filters are forced on. Useful for: • fewer signals • stricter filtering • drawdown-conscious review • evaluation-style account discipline • users who prefer cleaner setups Important note: This mode does not guarantee safer trades or profitable outcomes. It only applies stricter internal filtering. ━━━━━━━━━━━━━━━━━━━━━━ 🕯️ SIGNAL CONFIRMATION MODE ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes two confirmation modes: ✅ Bar Close ⚡ Live Intrabar ✅ Bar Close Bar Close mode confirms signals only after the candle closes. This is the default mode. It is designed to reduce repaint perception and make signal behavior easier to review historically. This is generally the cleaner option for alerts and structured review. ⚡ Live Intrabar Live Intrabar mode allows signals to appear before the candle closes. This can provide earlier visual feedback. However, because the candle is still forming, the signal may change before the candle closes. This mode is faster but less stable than Bar Close confirmation. ━━━━━━━━━━━━━━━━━━━━━━ 🧭 ZERO FILTER ━━━━━━━━━━━━━━━━━━━━━━ The Zero Filter uses the oscillator’s zero line as an additional context layer. In the default logic: 🟢 LONG setups require the engine oscillator to be below zero. 🔴 SHORT setups require the engine oscillator to be above zero. This creates a reversal-style interpretation. The idea is that long signals may be more meaningful when the engine is stretched below the zero region, while short signals may be more meaningful when the engine is stretched above the zero region. Swing and Funded Account modes force this filter on. ━━━━━━━━━━━━━━━━━━━━━━ 📈 EMA FILTER ━━━━━━━━━━━━━━━━━━━━━━ The EMA filter adds price-location context. In this version, the default EMA logic is reversal-oriented: 🟢 LONG setups are allowed when price is below the EMA. 🔴 SHORT setups are allowed when price is above the EMA. This is not a classic trend-following EMA filter. It is used to help identify stretched conditions relative to a directional reference. Swing and Funded Account modes force this filter on. The dashboard also uses the EMA relationship to display a simple bias state: 🟢 LONG ONLY 🔴 SHORT ONLY ⚪ NEUTRAL This bias should be treated as context, not as an instruction to trade. ━━━━━━━━━━━━━━━━━━━━━━ 🕰️ HTF BIAS FILTER ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes a Higher Timeframe Bias Filter. Available HTF modes: ⚪ Off 📈 EMA 100 📉 EMA 200 ⚙️ Engine HTF ⚪ Off No higher-timeframe filter is used. 📈 EMA 100 The script checks whether higher-timeframe price is above or below the HTF EMA 100. Above HTF EMA100 = bullish bias. Below HTF EMA100 = bearish bias. 📉 EMA 200 The script checks whether higher-timeframe price is above or below the HTF EMA 200. This is a slower and broader macro filter compared to EMA 100. ⚙️ Engine HTF The script calculates the engine relationship on the selected higher timeframe. HTF engine above its signal line = bullish bias. HTF engine below its signal line = bearish bias. The HTF filter can help reduce signals that conflict with a broader directional context. The default HTF timeframe is 60 minutes, but users can adjust it. ━━━━━━━━━━━━━━━━━━━━━━ ⭐ SIGNAL SCORE ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine calculates a 0–100 signal score. The score is based on internal confluence components such as: ⚡ engine direction 📏 stretch strength 🧭 zero filter alignment 📈 EMA filter alignment 🔥 distance strength The score appears in the dashboard and is also used internally by the selected Signal Mode. Important note: The score is not a win-rate prediction. A score of 85 does not mean the signal has an 85% chance of winning. It simply means the internal confluence conditions were stronger according to the script’s scoring model. ━━━━━━━━━━━━━━━━━━━━━━ 🌟 STAR-BASED MAIN CHART LABELS ━━━━━━━━━━━━━━━━━━━━━━ On the main chart, Pulse Entry Engine uses star-based quality labels. This keeps the chart cleaner than showing large score numbers directly on every signal label. Star system: ⭐⭐⭐⭐⭐ = 96–100 ⭐⭐⭐⭐ = 92–95 ⭐⭐⭐ = 88–91 ⭐⭐ = 84–87 ⭐ = 80–83 ☆ = below 80 Example labels: ▲ LONG PULSE ⭐⭐⭐⭐ ▼ SHORT PULSE ⭐⭐⭐ The dashboard still keeps the full numerical score for users who want more detail. ━━━━━━━━━━━━━━━━━━━━━━ 📊 SIGNAL STRENGTH BAR ━━━━━━━━━━━━━━━━━━━━━━ The main dashboard includes a Signal Strength Bar. Example: █████ 92 ████░ 84 ███░░ 73 This gives a quick visual representation of the current score. The strength bar is not a performance statistic. It does not represent probability or future outcome. It only visualizes the current internal signal-quality score. ━━━━━━━━━━━━━━━━━━━━━━ 🎨 VISUAL THEME SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes three full visual themes: 🟢 Dark Emerald 🔵 Aqua Neon 🟣 Royal Purple 🟢 Dark Emerald A dark professional theme using green, teal, and cyan accents. 🔵 Aqua Neon A brighter cyber-style theme using blue, cyan, and pink tones. 🟣 Royal Purple A premium-looking theme using purple and gold-style accents. The theme affects: 🎨 dashboard colors 📡 live panel colors 🌊 oscillator colors 📊 histogram colors 🏷️ signal labels 📦 TP/SL boxes 🟢 LONG visuals 🔴 SHORT visuals 🕯️ active-trade candle coloring 🟩 signal-candle background 🚨 visual alert feel Color inputs are intentionally not exposed in the Inputs tab. The indicator uses internal theme profiles to keep the settings cleaner and more organized. ━━━━━━━━━━━━━━━━━━━━━━ 🖥️ DISPLAY MODE ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes three display profiles: ▫️ Minimal ▪️ Pro 🔳 Full ▫️ Minimal Minimal mode reduces chart clutter. It hides many optional visual layers such as dashboards, oscillator dots, gradient zones, pulse backgrounds, and TP level lines. Useful for clean chart viewing. ▪️ Pro Pro mode is the balanced default layout. It uses the user’s individual visibility settings and is designed as the standard V1.0 experience. 🔳 Full Full mode forces major visual layers on. Useful for: 🎥 YouTube live streams 📸 screenshots 📚 educational examples 🧪 demonstrations 📊 full feature previews ━━━━━━━━━━━━━━━━━━━━━━ 🌊 OSCILLATOR VISUAL ENGINE ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes multiple oscillator display styles. Available oscillator styles: 📊 Neon Histogram 🌊 Modern Pulse Wave ➖ Clean Line Pro 🕯️ Classic HA 🕯️ Classic Candles Neon Histogram is the default mode in this version. 📊 Neon Histogram This mode displays the difference between the engine core and signal line as a histogram. The histogram helps users quickly read momentum expansion and contraction. Positive and negative histogram areas are colored according to the selected theme. 🌊 Modern Pulse Wave This mode displays a smooth pulse wave with soft glow layers and a momentum cloud. It is designed to look clean, modern, and premium. ➖ Clean Line Pro This mode provides a simpler line-based oscillator view with less visual noise. 🕯️ Classic HA This mode keeps the previous Heikin Ashi-style synthetic oscillator candle view. 🕯️ Classic Candles This mode keeps the previous raw synthetic oscillator candle view. These modes allow users to choose between a modern histogram, a glowing wave, a minimal line, and legacy oscillator candle styles. ━━━━━━━━━━━━━━━━━━━━━━ 🌈 OSCILLATOR SIGNAL DOTS ━━━━━━━━━━━━━━━━━━━━━━ The oscillator panel can show LONG and SHORT signal dots. In modern modes, the dots can include a glow effect: ✨ larger soft outer dot ● smaller sharp inner dot This makes signal locations easier to identify in the oscillator panel without large text labels. These oscillator dots are visual markers only. They are based on the same signal logic as the main chart labels. ━━━━━━━━━━━━━━━━━━━━━━ ⚡ EXTREME STRETCH MARKERS ━━━━━━━━━━━━━━━━━━━━━━ The script can display extreme stretch markers when the engine reaches an extreme distance condition. These markers highlight stretched momentum conditions. They are not direct trade signals by themselves. Their purpose is to show that the engine has moved far away from its recent average relationship with the signal line. ━━━━━━━━━━━━━━━━━━━━━━ 📦 TP / SL PROJECTION SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes a TP/SL projection system on the main price chart. When a new signal appears, the script can draw: 📦 TP box 📦 SL box 🎯 TP1 line 🎯 TP2 line 🎯 TP3 line 🏷️ result label The system uses ATR-based risk. Default risk settings: 📌 SL ATR Multiplier = 2.5 📌 Final TP Risk Reward = 1.5R TP structure: TP1 = 25% of final TP distance TP2 = 50% of final TP distance TP3 = final TP The boxes are projected forward by an initial number of bars. Default: 📌 Initial TP/SL Box Length = 10 bars If the projected trade remains active longer than the initial length, the box continues extending until TP3, SL, or a valid replacement condition occurs. ━━━━━━━━━━━━━━━━━━━━━━ 🎯 TP1 / TP2 / TP3 / SL RESULT LOGIC ━━━━━━━━━━━━━━━━━━━━━━ The TP/SL projection system tracks the projected result visually. Possible result labels: 🟢 TP1 🟢 TP2 🟢 TP3 🔴 SL If price reaches TP3, the result is marked as TP3. If price hits SL before reaching any TP level, the result is marked as SL. If price reaches TP1 and later returns to SL, the result is marked as TP1. If price reaches TP2 and later returns to SL, the result is marked as TP2. This means the system remembers the highest target reached before a stop event. This makes the visual projection more informative than a simple static TP/SL marker. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ SAME-BAR TP/SL HANDLING ━━━━━━━━━━━━━━━━━━━━━━ If TP and SL are both touched on the same candle, there is ambiguity. The script cannot know the true intrabar sequence unless lower-timeframe reconstruction is used. For this reason, the script includes a same-bar setting: If TP and SL Hit Same Bar: 🔴 SL 🟢 TP1 SL is the conservative default. This allows users to decide how they want same-candle ambiguity to be handled in the visual projection. ━━━━━━━━━━━━━━━━━━━━━━ 🔁 ACTIVE TRADE SIGNAL GATE ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes an active projection gate. If a projected trade is active and has not yet reached TP1, the script blocks new signals. This prevents the chart from stacking multiple new signals before the previous projection has made minimum progress. If an active projection has already reached TP1 or TP2 and a new signal appears, the old projection can be closed at its highest reached TP level and the new signal can begin. This keeps the visual trade structure cleaner and more organized. ━━━━━━━━━━━━━━━━━━━━━━ 🕯️ ACTIVE TRADE CANDLE COLORING ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine can color candles while a projected trade is active. This candle coloring appears only during an active projection. 🟢 During an active LONG projection, candles use the theme long color. 🔴 During an active SHORT projection, candles use the theme short color. Once the projection closes, candle coloring stops. This helps users visually identify when the system considers a projected trade to be active. It is not a separate trading signal. ━━━━━━━━━━━━━━━━━━━━━━ 🟩 SIGNAL CANDLE BACKGROUND ━━━━━━━━━━━━━━━━━━━━━━ The script can highlight the exact candle that produced a confirmed signal. 🟢 LONG signal = vertical long-colored background stripe 🔴 SHORT signal = vertical short-colored background stripe This feature is useful for: 📌 historical review 📌 live chart monitoring 📌 YouTube live streams 📌 educational explanations 📌 quickly locating the original signal candle ━━━━━━━━━━━━━━━━━━━━━━ 📋 MAIN DASHBOARD ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes a compact main dashboard. The dashboard can display: 🎛️ Signal Mode 🎨 Theme 🧭 Bias 🔥 Stretch state ⭐ Score 📊 Strength 🎯 Signal state 🕯️ Confirmation mode 🕰️ HTF Bias The dashboard is intentionally compact. It is not designed to be a large performance table. Its purpose is to summarize the current engine state and help users understand what the script is currently reading. Dashboard position and size can be adjusted from the settings. ━━━━━━━━━━━━━━━━━━━━━━ 📡 LIVE SCANNING PANEL ━━━━━━━━━━━━━━━━━━━━━━ The script includes a compact Live Scanning panel. The live panel displays the Pulse Entry Engine live scanning state in a clean visual format. The lower information row was intentionally removed to keep the chart cleaner. Users can adjust: 📍 Live Panel Position 🔠 Live Panel Size ● Live blinking status symbol The live panel is visual only. It does not affect signal logic. ━━━━━━━━━━━━━━━━━━━━━━ 🚨 ALERT SYSTEM ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine includes both standard alert conditions and dynamic alert messages. Standard alertcondition alerts include: 🟢 LONG signal 🔴 SHORT signal ⚡ LONG/SHORT signal 🔥 Extreme stretch detected The script also includes dynamic alert messages using alert(). The dynamic alert message can include: 📌 indicator name and version 📌 signal direction 📌 ticker 📌 timeframe 📌 Signal Mode 📌 Confirmation Mode 📌 HTF Bias 📌 Score 📌 Stretch 📌 ATR risk setting 📌 TP RR setting Important usage note: To use the full dynamic alert message, create a TradingView alert with: Condition: Pulse Entry Engine Option: Any alert() function call The standard alertcondition options can still be used as simpler fallback alerts. ━━━━━━━━━━━━━━━━━━━━━━ 🧪 HOW TO USE THE INDICATOR ━━━━━━━━━━━━━━━━━━━━━━ A practical workflow: 1. Add Pulse Entry Engine to your chart. 2. Start with the default Pro display mode. 3. Choose a visual theme that fits your chart. 4. Select your Signal Mode. 5. Use Bar Close confirmation for cleaner signal review. 6. Choose whether to enable the HTF Bias Filter. 7. Watch the oscillator histogram for momentum expansion. 8. Review the dashboard for score, stretch, signal state, and HTF bias. 9. When a LONG or SHORT pulse appears, check the star rating. 10. Look at the signal candle background highlight. 11. Review the TP/SL projection box. 12. Observe whether the projection reaches TP1, TP2, TP3, or SL. 13. Use alerts if you want automated signal notifications. 14. Validate the indicator on the specific markets and timeframes you personally study. The indicator is best used as a structured decision-support tool. It should not be used as a blind execution system. ━━━━━━━━━━━━━━━━━━━━━━ ⚙️ SETTINGS REFERENCE ━━━━━━━━━━━━━━━━━━━━━━ 🎯 Signal Logic Source Selects the price source used by the Pulse Entry Engine core. Signal Length 1 Primary engine calculation length. Signal Length 2 Secondary engine calculation length. Signal Mode Selects the main signal preset: 🔥 Aggressive ⚖️ Balanced ⚡ Scalping 🌊 Swing 🛡️ Funded Account Signal Confirmation Mode Controls when a signal is allowed to confirm: ✅ Bar Close ⚡ Live Intrabar Average Distance Length Lookback length used to calculate average distance between engine and signal line. Distance Multiplier Balanced mode stretch threshold. Extreme Stretch Multiplier Balanced mode extreme stretch threshold. Reset When Distance Gets Weak Allows the internal signal state to reset when distance becomes weak. Reset Multiplier Defines how weak the distance must become before reset. Use Zero Filter Enables zero-line filtering. 📈 EMA Filter Use EMA Filter Enables the EMA context filter. EMA Length EMA length used for the filter and dashboard bias. 🧭 HTF Bias Filter HTF Bias Mode Available modes: ⚪ Off 📈 EMA 100 📉 EMA 200 ⚙️ Engine HTF HTF Timeframe Higher timeframe used by the HTF filter. 🎨 Style Visual Theme Available themes: 🟢 Dark Emerald 🔵 Aqua Neon 🟣 Royal Purple Display Mode Available profiles: ▫️ Minimal ▪️ Pro 🔳 Full Oscillator Visual Mode Available styles: 📊 Neon Histogram 🌊 Modern Pulse Wave ➖ Clean Line Pro 🕯️ Classic HA 🕯️ Classic Candles Show Signal Line Shows or hides the engine signal line. Show Momentum Cloud Shows the oscillator momentum cloud. Show Zero Zone Shows the oscillator zero zone. Zero Zone Width Controls the width of the zero zone. Show Gradient Background Zones Shows subtle oscillator background zones. Show Extreme Stretch Markers Shows extreme stretch pulse markers. Show Oscillator Pulse Glow Adds glow layers to modern oscillator visuals. Show Neon Histogram Controls histogram visibility when Neon Histogram mode is selected. Show Oscillator Signal Dots Shows LONG/SHORT dots in the oscillator panel. Show Main Chart LONG / SHORT Labels Shows signal labels on the main chart. Main Chart Label Offset ATR Controls how far signal labels are placed from price. Show Main Chart Dashboard Shows or hides the main dashboard. Dashboard Position Controls dashboard location. Dashboard Size Controls dashboard text size. Show Main Chart Live Dashboard Shows or hides the live scanning panel. Live Panel Position Controls live panel location. Live Panel Size Controls live panel text size. Show Signal Pulse Background Shows a soft background pulse when a signal appears. Show Signal Candle Background Highlights the exact signal candle with a vertical background. Signal Candle Background Transparency Controls the transparency of the signal candle highlight. Color Candles During Active Trade Colors price candles only while a projected trade is active. Active Trade Candle Transparency Controls active-trade candle coloring transparency. Use Live Blinking Status Symbol Enables the blinking live scanning dot. Live Symbol Blink Seconds Controls blink speed. 📦 TP / SL Box System Show TP / SL Boxes on Main Chart Enables TP/SL projection boxes. SL ATR Length ATR length used for stop-loss calculation. SL ATR Multiplier ATR multiplier used for SL distance. Final TP Risk Reward Final TP target multiple: 1R 1.5R 2R 3R 4R 5R Max Stored TP / SL Trades Maximum historical projection objects kept on chart. If TP and SL Hit Same Bar Controls same-bar ambiguity handling. Show TP1 / TP2 / TP3 Lines Shows TP level lines inside the projection box. Initial TP / SL Box Length Initial forward length of projection boxes. Show TP / SL Result Label Shows result labels after projected trade closes. 🛡️ Professional Controls Max Main Signal Labels Limits the number of main-chart signal labels to protect TradingView object limits. Enable Dynamic Alert Messages Enables alert() based dynamic alert messages. Show Version Badge Shows the V1.0 badge in the visual panels. ━━━━━━━━━━━━━━━━━━━━━━ 🧠 WHAT MAKES THIS SCRIPT ORIGINAL ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine uses familiar concepts such as: ⚡ oscillator momentum 📈 signal lines 🧭 EMA context 🕰️ higher-timeframe filtering 📦 ATR-based risk projection 📊 dashboards 🚨 alerts These components are not unique by themselves. The originality of the script lies in how these components are organized into one workflow: Pulse Engine → Stretch Detection → Signal Mode Filtering → Score Classification → HTF Bias Confirmation → Modern Oscillator Visualization → Star-Based Quality Label → TP/SL Projection → Active-Trade Candle Coloring → Compact Dashboard → Dynamic Alerts This structure is intended to give users a more organized way to review momentum-based entries. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ IMPORTANT PRACTICAL NOTES ━━━━━━━━━━━━━━━━━━━━━━ The script’s behavior depends heavily on settings. Signal frequency and visual output may change based on: 🎛️ selected Signal Mode 🕯️ confirmation mode 📈 EMA filter setting 🧭 HTF bias mode 🌊 oscillator visual mode 🖥️ display profile 📏 ATR multiplier 🎯 TP RR setting 📊 market ⏱️ timeframe 📉 symbol volatility 📚 available historical bars A mode that appears cleaner on one symbol may not behave the same way on another. The TP/SL boxes are visual projections based on the script’s rules. They are not broker orders. They do not account for real execution conditions. ━━━━━━━━━━━━━━━━━━━━━━ ⚠️ LIMITATIONS AND SHORTCOMINGS ━━━━━━━━━━━━━━━━━━━━━━ This script has important limitations: ❌ It does not guarantee profitable trades. ❌ It does not predict future price movement. ❌ It does not replace risk management. ❌ It does not execute trades. ❌ It does not place orders. ❌ It does not include broker slippage. ❌ It does not include commissions. ❌ It does not include spreads. ❌ It uses bar-based chart data. ❌ Same-bar TP/SL order is approximated by a user-selected rule. ❌ Live Intrabar mode may change before candle close. ❌ Higher-timeframe filters can lag. ❌ EMA filters can conflict with certain market structures. ❌ Momentum signals can fail in choppy markets. ❌ Strong scores do not guarantee successful outcomes. ❌ TP/SL projections are visual analysis tools, not trade instructions. ❌ Historical visual behavior does not ensure future behavior. For these reasons, Pulse Entry Engine should be used as an educational decision-support tool, not as a standalone trading strategy. ━━━━━━━━━━━━━━━━━━━━━━ 👤 WHO THIS SCRIPT MAY BE USEFUL FOR ━━━━━━━━━━━━━━━━━━━━━━ This script may be useful for traders who: ✅ study momentum-based entries ✅ want a structured entry review tool ✅ want a clean visual dashboard ✅ want higher-timeframe context ✅ want ATR-based TP/SL projection ✅ want signal strength scoring ✅ want modern oscillator visuals ✅ want star-based quality labels ✅ want active-trade candle coloring ✅ want dynamic alerts ✅ prefer organized chart-based analysis ✅ want a free visual trading assistant for review and education It may be less suitable for users who: ❌ want guaranteed buy/sell signals ❌ want a fully automated trading bot ❌ do not want chart visuals ❌ do not use technical analysis ❌ expect one setting to work on every market ❌ want an indicator that replaces their own decision-making ━━━━━━━━━━━━━━━━━━━━━━ 🧭 BEST PRACTICE SUGGESTIONS ━━━━━━━━━━━━━━━━━━━━━━ For cleaner review: ✅ Start with Bar Close confirmation. ✅ Start with Balanced or Funded Account mode. ✅ Use HTF Bias only when you want broader directional filtering. ✅ Use Minimal display mode if the chart feels crowded. ✅ Use Full display mode for screenshots, education, and live demonstrations. ✅ Review signals together with market structure. ✅ Avoid treating every label as an automatic trade. ✅ Test the indicator on the specific symbols and timeframes you actually watch. ✅ Combine the tool with your own analysis and risk rules. ━━━━━━━━━━━━━━━━━━━━━━ 🛡️ DISCLAIMER ━━━━━━━━━━━━━━━━━━━━━━ Pulse Entry Engine is provided for educational and informational purposes only. It does not constitute financial, investment, or trading advice. No indicator can guarantee future results. Markets are uncertain, conditions change, and historical behavior does not ensure future performance. Every user is responsible for their own analysis, validation, risk management, position sizing, and trading decisions. Use this script as a structured decision-support and visual review framework, not as a promise of profitability.
Pine Script® indicator
by trade_w_samet
5
TriForce: Trend + Momentum + VolumeHere's your TriForce Indicator — a complete Pine Script v5 combining all three pillars: 🔱 What's Inside LayerIndicatorRoleTrendSuperTrend (ATR-based)Determines market directionMomentumMACD (12/26/9)Confirms strength of the moveVolumeVAPI (signed volume %)Confirms institutional participation 🎯 Signal Logic ✅ STRONG BUY — All 3 agree bullish → high-confidence long entry 🔴 STRONG SELL — All 3 agree bearish → high-confidence short/exit 🟡 WATCH LONG — 2 of 3 bullish → wait for confirmation 🟠 WATCH SHORT — 2 of 3 bearish → caution, possible reversal ⬜ NEUTRAL — Mixed signals → stay out 📦 Features SuperTrend line plotted on chart with color change BUY/SELL arrow labels only on new signal (no repainting spam) Background color shading for quick visual reading Live status table (top-right corner) showing each indicator's state 4 alert conditions ready to set in TradingView 🚀 How to Add to TradingView Open TradingView → Pine Editor (bottom panel) Paste the script → click Add to chart Customize ATR, MACD, and VAPI periods in Settings
Pine Script® indicator
by MagixAz
Imperium FlowImperium Flow is a market flow indicator designed to evaluate the quality behind price movement. It analyzes pressure, volume participation, candle behavior, wick rejection, Money Flow, and effort versus result to help traders understand whether a move is supported, stretched, weakening, or starting to rotate. The indicator is built for confirmation and market context. It does not predict price. Its purpose is to help identify when buyers or sellers have stronger control, when continuation remains healthy, and when market conditions are becoming less efficient. Main Features Exhaustion Zones; Money Flow; Price Pressure; Price Effort; Exhaustion Warnings; Reversal Warnings; Divergence. Each section is designed to give a different view of market quality, from participation and pressure to exhaustion, consolidation, and possible rotation. Exhaustion Zones Exhaustion Zones highlight areas where directional pressure has become stretched. Reaching these zones does not mean price must reverse. Strong trends can continue through them. The zones simply warn that late entries may carry more risk because continuation can become less efficient. They are most useful when combined with pressure shifts, candle rejection, absorption, fading Money Flow, or nearby market structure. Money Flow Money Flow shows whether buying or selling participation is stronger. When Money Flow is above zero, buyer participation is stronger. When it is below zero, seller participation is stronger. Rising or stable Money Flow can support bullish continuation. Falling or weak Money Flow can support bearish continuation. When price keeps moving in one direction while Money Flow starts fading or improving against it, the move may be losing quality. High positive or deep negative readings can also show stretched market conditions. Price Pressure Price Pressure shows the active balance between bullish and bearish pressure. Positive pressure suggests stronger buyer control. Negative pressure suggests stronger seller control. Pressure is most useful when compared with price movement. When pressure supports the direction of price, the move has better confirmation. When pressure starts moving against price, continuation may be losing quality. The pressure momentum columns help show acceleration, fading pressure, absorption, rejection, or early rotation near key market areas. Price Effort Price Effort is the main directional read of Imperium Flow. It shows whether price movement is supported by strong effort and meaningful follow-through, or whether the move is becoming weak, inefficient, or exhausted. When Price Effort is above zero and in a bullish state, buyers have stronger control. When it is below zero and in a bearish state, sellers have stronger control. When it turns neutral, the market may be losing direction or entering consolidation. The strongest continuation conditions usually appear when Price Effort, Price Pressure, and Money Flow support the same direction. When these readings begin to separate, the move should be treated with more caution. Exhaustion Warnings Exhaustion warnings are shown with ✦ symbols. They appear when a strong move may be starting to lose quality. These warnings are not designed to mark the exact top or bottom. They are caution markers showing that the current direction may be becoming more vulnerable. An exhaustion warning can appear when pressure fades, Money Flow becomes stretched, candles show rejection, volume produces weaker follow-through, or absorption forms against the active move. The warning is more useful after an extended move or near important market structure, liquidity areas, previous highs or lows, support, or resistance. If price continues with strong pressure after the warning, the trend may remain valid. If it is followed by weak continuation, rejection, or a shift in Price Effort, the market may be preparing for a pullback or rotation. Reversal Warnings Reversal warnings are shown with ▼ and ▲ symbols. They appear when an extended move begins to show stronger rotation evidence. These are not automatic buy or sell signals. They highlight moments where the active side may be losing control and the opposite side is starting to react. A reversal warning can form after rejection from an extreme area, a pressure shift against the active move, fading Money Flow, or a turn in Price Effort from stretched conditions. The signal is strongest when it appears after exhaustion, near important market structure, or after a failed continuation attempt. If price ignores the warning and continues with strong pressure, the trend may still remain active. Divergence Divergence highlights when price continues to extend, but Imperium Flow no longer confirms the move with the same strength. This can help traders spot moments where momentum, pressure, or participation may be weakening behind the current price movement. Divergence does not mean price must reverse immediately. It should be checked together with market structure, support, resistance, liquidity areas, rejection, exhaustion, and Price Effort behavior. Divergence signals are confirmed after the swing confirmation period, so they can appear a few candles after the actual high or low. They are best used as context, not as standalone entry signals. Practical Use Imperium Flow is best used to evaluate whether the current move has strong confirmation or is starting to lose quality. The main read is Price Effort. Price Pressure and Money Flow should be used as supporting confirmation. When all three support the same direction, continuation conditions are usually stronger. When they separate, fade, or conflict, traders may choose to become more selective with entries, exits, and trade management. Mixed or unstable readings usually mean the market does not have clear directional control. Important Notes Exhaustion is a caution signal, not a guaranteed reversal; Reversal warnings are for context and should not be treated as automatic buy or sell signals; Divergence can appear before price reacts, especially during strong trends; Money Flow, Price Pressure, and Price Effort should be read together; Mixed readings usually mean the move lacks clear confirmation; Readings may be less reliable on symbols with missing, unreliable, or illiquid volume; Non-standard chart types may produce different readings because candle structure and volume behavior can be altered; The indicator analyzes current and recent market behavior. It does not predict future price movement. Imperium Flow is intended for structured market analysis and confirmation. It should be used as part of a broader trading process that includes market structure, execution rules, invalidation, and risk management.
Pine Script® indicator
by Crypto_Imperija
ATR Fibonacci Trend Envelopes [BigBeluga]ATR Fibonacci Trend Envelopes is a professional-grade trend-following and mean-reversion framework. It combines the volatility-filtering power of Average True Range (ATR) with the mathematical precision of the Fibonacci Golden Ratio to define high-probability "buy/sell pockets" within an established trend. Equipped with a live Multi-Timeframe (MTF) dashboard, this indicator allows traders to monitor trend alignment across four different time horizons simultaneously, ensuring that local entries are always supported by the broader market structure. 🔵 THE DUAL-ENGINE FRAMEWORK Volatility-Adjusted Trend Engine: The indicator uses a customizable Moving Average (SMA, EMA, HMA, etc.) combined with an ATR multiplier to create dynamic envelopes. This filters out market noise and only signals a trend change when price decisively breaks the volatility boundary. Dynamic Golden Pocket (0.618 - 0.786): Unlike static retracements, these Fibonacci levels are calculated relative to the current ATR envelope. The "Pocket" acts as a high-interest zone where price is expected to find support (in uptrends) or resistance (in downtrends). Predictive Slope Projections: Using the current rate of change, the script projects the trend and Fibonacci levels into the future. This allows traders to visualize where "Value" will be in the coming bars, facilitating better trade planning and order placement. 🔵 CORE ARCHITECTURE MTF Alignment Dashboard: A real-time table tracks the trend status and "Pocket" proximity across four timeframes. A "BULL" status combined with an "INSIDE" pocket signal across multiple timeframes indicates a high-confluence institutional setup. Dynamic Transparency Feedback: The visual intensity of the Golden Pocket adapts based on price proximity. As price approaches the mid-point of the pocket, the colors become more saturated, providing an intuitive visual cue that the market is entering a high-probability reversal zone. Momentum-Driven Basis: The trend baseline (1.0 level) acts as the ultimate anchor. As long as price remains above this volatility-adjusted line in a bullish regime, the trend is considered structurally sound. 🔵 FEATURES Multi-MA Versatility: Choose from 5 different moving average types to calculate your trend basis, allowing the indicator to be tuned for slow-moving macro trends or fast-moving scalping setups. Real-Time Level Labels: Clear, real-time labels (0.5, 0.618, 0.786, 1.0) on the right axis provide exact price targets and stop-loss anchors at a glance. Customizable Projection Length: Adjust how far the indicator looks into the "future," allowing you to anticipate structural shifts before they occur on the chart. Adaptive UI Positioning: The dashboard can be moved to any corner of the chart and scaled to match your screen resolution, ensuring it never interferes with your technical analysis. 🔵 STRATEGIC APPLICATION The "Golden" Pullback: In a confirmed Bull trend (Cyan baseline), wait for price to enter the Dynamic Golden Pocket. Use the saturation of the baseFill color to identify the core of the value zone for a long entry. MTF Confluence Trading: Only take trades when at least three timeframes on the dashboard show the same trend direction. If the 1H and 4H are "BULL" while the 15m enters the "INSIDE" pocket, you have a high-probability trend-continuation setup. Volatility Breakouts: Monitor the distance between the baseline and the 0.5 Fib. When the ATR-based envelopes contract, a volatility breakout is imminent. A "⦿" label signal combined with a price cross of the 1.0 level marks the start of a new momentum cycle. Dynamic Exit Planning: Use the projected 0.5 or 0.618 levels as trailing profit targets. Because these levels adjust for both price and volatility, they represent a mathematically "fair" area to take chips off the table. ATR Fibonacci Trend Envelopes bridges the gap between classic technical analysis and modern volatility modeling. By combining MTF awareness with the natural pull of the Fibonacci ratios, it provides a clear, actionable map for navigating any market condition.
Pine Script® indicator
by BigBeluga
10
Volatility Gated Supertrend [BackQuant]Volatility Gated Supertrend Overview Volatility Gated Supertrend is a regime-aware trend-following indicator built around a modified Supertrend engine with an integrated volatility filter . Unlike a traditional Supertrend, which flips direction whenever price crosses its trailing bands, this version introduces a gating mechanism that can block trend reversals during low-volatility conditions . The purpose of the indicator is simple: Keep the responsiveness and structure of a Supertrend. Reduce false flips during sideways or compressed conditions. Allow trend transitions primarily when volatility is expanding enough to justify participation. The result is a smoother and more selective trend engine designed to suppress whipsaws while still reacting to meaningful directional movement. The full source structure for the indicator can be referenced here: :contentReference {index=0} Core idea Traditional Supertrend indicators work well during directional markets but struggle in compressed environments: Price repeatedly crosses the trailing bands. Trend direction flips too frequently. False reversals appear during chop. This indicator attempts to solve that problem by asking: “Is there enough volatility expansion to justify accepting a new trend?” Instead of blindly allowing every flip, the indicator measures: Current volatility, Baseline volatility, Relative expansion or compression. Only when volatility conditions are sufficient does the trend engine allow a directional transition. What the Supertrend is The Supertrend is a volatility-based trailing trend indicator built from: ATR (Average True Range) A central price source A directional trailing stop structure The classic logic: Upper band = price source + ATR × multiplier Lower band = price source − ATR × multiplier These bands trail price dynamically: In bullish conditions, the lower band ratchets upward. In bearish conditions, the upper band ratchets downward. When price crosses one of the bands: The trend flips direction. This creates a clean directional regime model. How this version differs The major difference is the volatility gate . A normal Supertrend asks: “Did price cross the band?” This indicator asks: “Did price cross the band, and is volatility strong enough to trust the move?” That additional filter dramatically changes behavior in sideways conditions. ATR and volatility structure The indicator uses two ATR measurements: Fast ATR → current short-term volatility Slow ATR → baseline long-term volatility The core ratio: Volatility Ratio = Fast ATR / Slow ATR Interpretation: Ratio above threshold → volatility expansion Ratio below threshold → volatility compression This becomes the gate logic. Volatility Gate Logic The gate opens only when: Fast ATR / Slow ATR ≥ Gate Threshold If volatility is too compressed: The gate closes. Trend flips are blocked. Importantly: The Supertrend bands still calculate normally. Price can still cross them. But the directional state will not update while the gate is closed. This distinction matters because it means: The market may technically trigger a reversal, But the indicator intentionally ignores it if volatility conditions are weak. Why this helps Most trend-following systems fail in chop because: Small meaningless moves trigger directional flips. There is insufficient range expansion. The market lacks trend persistence. By requiring volatility confirmation: Weak reversals are filtered out. Trend state becomes more stable. Noise is reduced. This makes the indicator particularly useful during: Low-volatility consolidations, Mean-reverting conditions, Slow drifting ranges. Band construction The indicator uses: hl2 as the central source, ATR for dynamic width, A configurable multiplier for sensitivity. Formulas: Upper Band = hl2 + ATR × multiplier Lower Band = hl2 − ATR × multiplier The trailing logic prevents the bands from moving backward unnecessarily: Bullish lower band only rises. Bearish upper band only falls. This creates the staircase-style trailing structure common in Supertrend systems. Trend state Trend direction is binary: 1 = bullish -1 = bearish A raw bullish flip occurs when: Close > trailing upper band A raw bearish flip occurs when: Close < trailing lower band However: The trend only updates if the volatility gate is open. This is the defining behavior of the script. Blocked flips One of the most important features is the visualization of blocked signals . When: Price crosses a band, But volatility is insufficient, The script: Plots an X-cross marker, Keeps the existing trend state, Refuses the flip. This gives traders visibility into: Potential but unconfirmed reversals, Areas of weak participation, Fake breakouts or low-energy transitions. Visual behavior Trend band The active trailing band changes color based on trend direction: Bullish → bullish color Bearish → bearish color Gate closed → gated color (dimmed) Trend fill The script fills the space between price and the active band: Bullish fill during bullish regimes Bearish fill during bearish regimes This creates a cleaner directional overlay. Outer glow An additional glow layer expands slightly beyond the trend band: Adds directional emphasis, Improves trend readability, Visually reinforces active regime. When the gate closes: The band and candles dim. This visually communicates: “The trend engine is currently suppressing flips.” Candle coloring Candles can optionally inherit the trend state: Bullish regime → bullish candles Bearish regime → bearish candles Gate closed → dimmed neutral appearance This allows the indicator to function as a full-chart regime overlay. Signal logic Bullish signal Occurs when: Trend flips from bearish to bullish, AND the gate is open. Bearish signal Occurs when: Trend flips from bullish to bearish, AND the gate is open. Blocked signal Occurs when: A raw flip condition appears, BUT volatility ratio is below threshold. This distinction is important: A blocked signal is not ignored information. It is a rejected transition. How to interpret the gate Gate open Volatility is active. Market expansion is sufficient. Trend flips are allowed. Gate closed Market is compressed. Conditions are likely choppy. Trend reversals are suppressed. This effectively turns the indicator into a: Trend-following system during expansion, Trend-holding system during compression. Why ATR ratio works well ATR ratio is a powerful regime detector because it measures: Current volatility relative to normal volatility. Not just: “Is volatility high?” But: “Is volatility high relative to its recent baseline?” This adaptive behavior allows the gate to work across: Different assets, Different timeframes, Different volatility environments. Input guide ATR Multiplier Controls band width: Higher = wider bands, fewer flips Lower = tighter bands, more sensitivity ATR Length Controls volatility calculation for the Supertrend itself. Fast ATR Short-term volatility measure. Slow ATR Long-term baseline volatility measure. Gate Threshold Controls how strict the gate is: Lower threshold = more permissive Higher threshold = more restrictive Example: 0.6 → allows more flips 1.0 → requires current volatility to match baseline 1.2 → requires expansion regime Strengths Reduces Supertrend whipsaws in chop. Adds regime awareness. Uses adaptive volatility filtering. Clean trend visualization. Blocked-signal logic provides extra context. Limitations Can delay reversals during early expansion. Very high thresholds may suppress legitimate transitions. Still fundamentally a trend-following system. Not designed for low-volatility mean reversion trading. Best use case Volatility Gated Supertrend works best as: A directional regime filter, A swing trend overlay, A volatility-aware trend confirmation tool, A way to suppress noise during consolidations. It is particularly useful for traders who: Like Supertrend logic, But dislike how often it flips in sideways markets. Summary Volatility Gated Supertrend extends the classic Supertrend framework by introducing a volatility-aware gating engine that blocks trend reversals during compressed market conditions. By comparing fast ATR against slow ATR, the script determines whether enough volatility expansion exists to justify a directional transition. The result is a cleaner, more stable trend system that retains the strengths of Supertrend logic while dramatically reducing whipsaws during low-energy market regimes.
Pine Script® indicator
by BackQuant
6
Pymander's MA SuitePymander's MA Suite is a versatile and all-in-one toolkit designed to give you total control over your trend analysis. Whether you’re a scalper looking for quick crossovers or a swing trader tracking long-term trends, this suite is built to be the only moving average indicator you’ll ever need. What makes it unique? Unlike standard MA ribbons that lock you into one type of calculation, EZ MA Suite gives you 5 fully independent slots. You can mix and match different lengths, sources, and—most importantly—12 different MA types in a single indicator. We’ve also cleaned up the visuals with "premium" signal placement and modern icons so your chart stays professional and clutter-free. The Powerhouse MA Selection You have access to a massive library of moving averages to fit any strategy: The Classics: SMA, EMA, WMA, RMA, VWMA. The Smooth & Fast: HMA (Hull), ALMA (Arnaud Legoux), and LSMA (Least Squares). The Lag-Killers: DEMA (Double), TEMA (Triple), and ZLEMA (Zero Lag). The Adaptive: KAMA (Kaufman), which adjusts itself based on market noise! Stay on the Right Side of the Move We’ve integrated a smart Buy/Sell Signal engine based on crossovers. You simply pick which of your 5 MAs is the "Fast" one and which is the "Slow" one. But here’s the game-changer: The Trend Filter. To help you avoid "choppy" fakeouts, you can enable a trend filter using a third MA (like a 200 SMA). When active, the suite will only show Buy signals if you're in an uptrend and Sell signals if you're in a downtrend. It’s all about keeping you aligned with the "big money" flow! 💬 We want to hear from you! I built this to make our trading lives easier, but I’d love to know how you’re using it. Do you have a favorite MA combination? Is there a specific feature you’d like to see next? Drop your feedback and let’s keep improving this suite together! Wishing you all lots of luck and many, many green days!! — Pymander
Pine Script® indicator
by PYMAND3R
SupOsc + SSL + Willy SignalsWhat It Does This is a confluence signal indicator that combines three separate technical indicators and only fires a buy or sell signal when all three agree simultaneously. The idea is to reduce false signals by requiring multiple independent conditions to align before triggering an entry. It plots simple B (buy) and S (sell) labels directly on your chart. The Three Indicators 1. SuperTrend Oscillator (SupOsc) A normalized oscillator built from a SuperTrend calculation. Rather than plotting the SuperTrend line itself, it measures how far price is from the SuperTrend bands and converts that into an oscillator value between -1 and +1. A smoothed EMA histogram runs underneath it. For signals, it watches for the oscillator crossing the -0.50 level upward (buy) or crossing the +0.50 level downward (sell). Think of it as a momentum/trend confirmation filter. 2. SSL Channel A simple but effective trend direction tool that uses SMAs of the highs and lows to determine whether price is in a bullish or bearish regime. When the upper SSL line is above the lower line, it's bullish. When below, it's bearish. The signal requires SSL to be confirming the same direction as the SupOsc before anything fires. 3. Williams %R A momentum oscillator that measures where price closed relative to its recent high-low range, on a scale of 0 to -100. The indicator checks the previous candle's Williams %R reading — requiring it to have been in oversold territory (below -80) for buys, or overbought territory (above -20) for sells. This acts as a pullback/exhaustion filter, helping you buy dips and sell rips rather than chasing. Does It Repaint? Largely no, but with one caveat to be aware of. The SupOsc and Williams %R components are calculated purely on current timeframe bars using standard closed-bar data — no repainting there. The SSL component uses request.security() with lookahead=barmerge.lookahead_off, which is the correct, repaint-safe setting. However, if you set the SSL Timeframe to a higher timeframe than your chart, the SSL values will only update when that higher timeframe bar closes — meaning mid-bar the value reflects the previous completed HTF bar, which is standard and expected behavior, not true repainting. The Williams %R check also looks at wR (the previous bar's value), which is already a closed bar — safe. Bottom line: Signals that appear on a closed bar will not disappear or move. Signals on the current live bar could technically shift if conditions change before the bar closes, which is true of virtually any indicator. Personally I find it works best for confirmations when combined with the CCI as seen in the image below.
Pine Script® indicator
by parkerberlinger
Session Killzones & Breakouts [BigBeluga]🔵 OVERVIEW Session Killzones & Volume Flow Profile is a professional-grade market structure tool that merges time-based "Killzone" analysis with intraday volume distribution. This advanced version covers the full global trading cycle— Asia, London, and New York —and now includes a Performance Statistics Dashboard to track historical breakout success. By visualizing the "Point of Control" (POC) and volume distribution, it helps traders understand institutional interest zones, while the new dashboard provides a quantitative edge by showing how often each session successfully hits its expansion targets. 🔵 CONCEPT Three-Session Cycle — Automatically encapsulates the Asia, London, and New York sessions in dynamic, color-coded zones. Real-Time Point of Control (POC) — Continuously calculates and plots the most traded price level during the session development, highlighting the current high-interest node as it forms. Post-Session Volume Profile — Once a session ends, a high-resolution, stepped polyline profile is generated to visualize the final "Value Area." Breakout Expansion — Projects three mathematical price targets (Deviations) once price escapes a session's range. Performance Dashboard — A real-time table tracking the total number of bullish/bearish breakouts and successful target hits for every session. 🔵 HOW IT WORKS (IN-DEPTH) 1️⃣ Real-Time POC & Session Development As each session develops, the indicator tracks every price tick and volume bar from the very first minute. Live POC Tracking: While the session is active, the indicator plots a Real-Time POC box and extension line that shifts dynamically as new volume flows in. This identifies the "fairest price" exactly when it is being negotiated. This allows traders to see the session's internal center of gravity before the final profile is even drawn. 2️⃣ Post-Session Volume Flow Profile Immediately after a session concludes, the indicator finalizes the data and draws a high-resolution Polyline Profile. Longer horizontal steps in the polyline represent "High Volume Nodes" where institutional accumulation or distribution was most intense. The final POC is locked in, providing a permanent historical anchor for future support and resistance. 3️⃣ Breakout & Target Logic Once a session ends, its High and Low act as structural boundaries. A confirmed close outside these boundaries triggers a Breakout Signal (Triangle) and a dashed "Tether Line" connecting the move back to its source. Three expansion targets (Dev 1, 2, and 3) are projected. These lines are "hit-aware," meaning they stop extending exactly when price reaches the target, providing a clean visual record of the move's completion. 4️⃣ The Performance Dashboard The indicator maintains a global tally of all session events. Break ▲ / ▼: Tracks how many times a session has broken out in either direction. Hit |, ||, |||: Tracks how many times those breakouts successfully reached the first, second, and third deviation targets. This allows traders to quickly see which session is currently providing the most reliable follow-through on the current asset. 🔵 KEY FEATURES Global Session Coverage: Dedicated settings for Asia (Pink), London (Cyan), and New York (Orange). Real-Time POC Visualization: A live-updating POC box and extension line that identifies high-interest levels as the session unfolds. Finalized Volume Profile: A sleek, stepped polyline generated at session end for post-session structural analysis. Statistics Dashboard: A customizable table (position and visibility) showing breakout and target hit counts. "Hit-Aware" Targets: Target lines (marked |, ||, |||) stop automatically upon price contact to reduce chart clutter. High-Resolution Polylines: Optimized volume visualization that provides granular detail without sacrificing chart performance. 🔵 HOW TO USE Monitor the Live POC: During the session, watch where the POC box is located. Price often orbits this level as the "mean," and a strong move away from it often precedes a full session breakout. Analyze the Final Profile: Once the session ends, use the Polyline Profile to identify the "Value Area." If price returns to the session range later, these high-volume nodes often act as strong support or resistance. Consult the Dashboard: Use the performance table to identify which session has the highest win rate for breakouts on your specific timeframe. Target Scaling: Use Deviation 1 (|) for high-probability scalps, Deviation 2 (||) for standard trend targets, and Deviation 3 (|||) for major institutional expansion points. 🔵 CONCLUSION Session Killzones & Volume Flow Profile is a complete institutional roadmap. By combining the "When" (Sessions) with the "Where" (Live POC & Final Profile) and the "How Much" (Dashboard Stats), it provides a data-driven framework for navigating the most profitable hours of the trading day.
Pine Script® indicator
by BigBeluga
9
Trend V2 Exact + Soft Filters**Trend V2 Exact + Soft Filters** Trend V2 Exact + Soft Filters is a precision-based momentum and confirmation indicator designed to identify high-probability market turning points with clarity and structure. Built around a smoothed correlation trend engine, it delivers both early warnings and confirmed signals while maintaining strict control over signal quality. At its core, the indicator plots two key lines: * **Purple Line** – a smoothed representation of trend momentum * **Yellow Line** – a signal line used for confirmation and timing These lines operate within a structured zone system, allowing the script to detect when price action reaches statistically significant extremes before triggering any signals. --- ### 🔍 How It Works The logic follows a two-stage process: **1. Setup (Weak Signals)** A potential trade is identified when: * The Yellow line enters a defined extreme zone (overbought or oversold) * The Purple line reaches a deeper threshold (“touch level”) This creates a *“ready state”*, displayed as **Weak Buy (WB)** or **Weak Sell (WS)** signals. These are early warnings — not confirmations. **2. Confirmation (Strong Signals)** A trade is only confirmed when: * The Purple line crosses the Yellow line *after* the setup is armed * Optional filters (if enabled) agree with the direction This produces **Strong Buy (SB)** or **Strong Sell (SS)** signals — the primary entries. --- ### ⚙️ Smart Signal Control To improve reliability without over-filtering, the script includes optional **Soft Filters**: * **Turn Filter** – ensures momentum is actually shifting direction * **Volume Filter** – checks whether volume supports the move * **Liquidity Filter** – evaluates participation using volume-based proxies Each filter can be enabled or disabled depending on your trading style, allowing full control between responsiveness and confirmation strength. --- 🔁 Anti-Repaint & Signal Flow The indicator uses a strict event-state system: * Signals are only triggered once per cycle * Buy and sell signals alternate (no stacking) * Setups must fully complete before confirmation This ensures clean, non-redundant signals and avoids noise in ranging conditions. --- 📊 Visual Structure * Clear upper and lower bands highlight extreme conditions * Strength and touch levels are plotted for transparency * Signals are minimal, clean, and easy to read on any timeframe --- ✅ Best Use Trend V2 is ideal for: * Intraday and swing trading * Identifying reversals and continuation entries * Traders who want **early context (weak signals)** + **confirmed execution (strong signals)** --- ⚠️ Notes This is a confirmation tool, not a standalone strategy. It performs best when combined with market structure, support/resistance, or higher timeframe bias. --- Designed for traders who value precision, structure, and control over raw signal frequency.
Pine Script® indicator
by MrBrainless
[ A L P H A X ] Slope Spectrum ProAlphaX Slope Spectrum Pro — Multi-Period Regression Oscillator, Adaptive Signal Line, Momentum Acceleration, Statistical Regime Detection, Classic & Hidden Divergence & Conviction Dashboard AlphaX Slope Spectrum Pro is a professional-grade trend momentum oscillator built on a proprietary multi-period linear regression engine that scans across an entire range of lookback periods simultaneously and synthesizes them into a single adaptive oscillator value per bar. Rather than relying on a fixed-period momentum calculation, Slope Spectrum Pro measures the statistical slope of price across every period in the scan range and combines them using inverse-variance weighting — giving more influence to periods whose regression fits are more consistent, and less to those where price has been noisy. The result is a momentum oscillator that is simultaneously responsive and robust. On top of this engine sits a complete analytical layer: an adaptive signal line that changes speed with market conditions, a momentum acceleration histogram, statistical regime detection bands, classic and hidden divergence detection, regime-filtered entry signals with main chart overlay, and a live 10-row conviction dashboard. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📸 Visual Overview AlphaX Slope Spectrum Pro in the oscillator pane — gradient-colored slope line with gradient fill, acceleration histogram in the background, adaptive signal line, regime threshold bands, divergence markers, bull/bear signal dots, main chart triangles, and the conviction dashboard ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔬 The Slope Engine — Multi-Period Regression Core At the foundation of Slope Spectrum Pro is a multi-period linear regression scanner . On every bar, the engine runs a complete set of linear regressions across every period from your configured minimum to maximum, stepping at your chosen interval. With default settings of Min Period 10, Max Period 100, and Step Size 5, this means 19 independent regressions are computed and synthesized per bar. Each regression fits a straight line to the logarithm of price over the lookback window and extracts the slope of that fit — a dimensionless measure of directional momentum at that timescale. Positive slope means upward momentum. Negative slope means downward momentum. Steeper slope means stronger momentum. Inverse-Variance Weighting: When Inverse-Variance Weighting is enabled, each regression period's slope is weighted by the inverse of its residual variance — how consistently price tracked the regression line over that lookback. A period where price followed its regression cleanly gets high weight. A period where price bounced erratically around the fitted line gets low weight. The result is that cleaner, more consistent trend periods contribute more to the final oscillator value than noisy, choppy periods — the oscillator becomes naturally less sensitive to random price fluctuations and more responsive to genuine directional momentum. What the oscillator value means: A value above zero means the weighted regression slope is net positive — more periods are trending upward than downward across the scanned range. A value below zero means the weighted slope is net negative — dominant downward trend momentum. The magnitude reflects how steep the consensus slope is. A large positive value means strong, consistent upward momentum. A value near zero means flat or contested momentum. The oscillator is plotted as a gradient-colored line that transitions dynamically from bear red to bull green based on its rolling 200-bar min/max range — the stronger the current momentum relative to recent history, the brighter the color. A gradient fill between the oscillator line and the zero line reinforces the directional bias visually. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 〰 Adaptive Signal Line The signal line tracks the slope oscillator — but instead of a fixed-period EMA, Slope Spectrum Pro uses an adaptive alpha-based EMA that changes its effective length based on current market conditions. How it adapts: The adaptation measures trend strength as how many standard deviations the current oscillator value is from its recent mean. When the oscillator is far from its mean — a clear, developing trend — the signal line shortens and reacts faster, following the oscillator closely. When the oscillator is near its mean — a ranging or choppy condition — the signal line lengthens, smoothing out minor oscillations and reducing false crossovers. In a strong trend: the signal is tight. Crossovers happen quickly and reflect real momentum shifts. In chop or range: the signal is loose. It takes a more significant oscillator move to produce a crossover, filtering out noise automatically. The current effective signal length is shown live on the dashboard as EMA~N — you can see exactly how tight or loose the signal is at any moment. Adaptive speed can be toggled off for a consistent fixed-length signal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Momentum Acceleration Histogram Behind the oscillator line, a background acceleration histogram plots the rate of change of the slope oscillator — how fast momentum is building or fading right now. Green columns — acceleration is positive. The slope oscillator is increasing. Momentum is building in the bullish direction. Red columns — acceleration is negative. The slope oscillator is decreasing. Momentum is fading or building in the bearish direction. Reading the acceleration alongside the main oscillator gives you a two-layer picture: Oscillator above zero + green acceleration = strengthening bull momentum . The best time to enter or hold long. Oscillator above zero + red acceleration = bull momentum peaking and fading . Consider reducing exposure or preparing to exit. Oscillator below zero + red acceleration = strengthening bear momentum . Best time to hold or enter short. Oscillator below zero + green acceleration = bear momentum fading . Watch for a potential reversal or crossover signal. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📊 Statistical Regime Detection Slope Spectrum Pro automatically classifies the current market environment into one of three regimes using a rolling statistical framework built from the oscillator's own mean and standard deviation: Bull Regime — the oscillator is above the upper band (mean + N standard deviations). Background tints subtly green. Only bullish signals fire when regime filtering is enabled. Bear Regime — the oscillator is below the lower band (mean − N standard deviations). Background tints subtly red. Only bearish signals fire when regime filtering is enabled. Range Regime — the oscillator sits between the two bands. Background is a very faint neutral gray. No directional regime is confirmed. Regime-filtered signals are suppressed entirely. Thresholds are calculated as oscillator mean ± (standard deviation × sensitivity multiplier) over the configured lookback. Increasing the sensitivity multiplier raises the bar required to enter Bull or Bear regime — only the strongest trend episodes qualify. Lowering it makes transitions more frequent. This system directly controls signal quality when Regime-Filtered Signals is enabled — crossovers opposing the active regime direction are silently blocked before they ever reach the chart. Regime bands on the oscillator — Bull threshold above, Bear threshold below, background tint reflecting the current zone ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ◆ Divergence Engine — Classic and Hidden Slope Spectrum Pro detects four divergence types by comparing confirmed oscillator pivot highs and lows against confirmed price pivot highs and lows. All detections are confirmed on bar close only — no repainting. Classic Divergences — Reversal Signals: Classic Bull Divergence (DIV ▲) — price makes a lower low while the slope oscillator makes a higher low. Selling pressure is weakening even though price is still falling. A reversal upward may be building. Classic Bear Divergence (DIV ▼) — price makes a higher high while the slope oscillator makes a lower high. Buying pressure is weakening even though price is still rising. A reversal downward may be building. Hidden Divergences — Trend Continuation Signals: Hidden Bull Divergence (H ▲) — price makes a higher low while the oscillator makes a lower low. Price held higher ground during the pullback — the uptrend is intact and continuation upward is probable. Hidden Bear Divergence (H ▼) — price makes a lower high while the oscillator makes a higher high. Price failed to rally as high as before even as the oscillator rebounded — the downtrend is intact and continuation downward is probable. Classic divergences warn of potential reversals. Hidden divergences confirm that pullbacks within a trend are likely to resume. Both are marked on the oscillator at the pivot bar with compact DIV or H labels. The divergence pivot lookback is configurable. Hidden divergence can be toggled independently from classic divergence. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🎯 Entry Signals — Oscillator and Main Chart Overlay Crossover signals fire when the slope oscillator crosses above or below the adaptive signal line, confirmed on bar close: Bull Signal (●) — oscillator crossed above signal line. A small green dot appears on the oscillator. Bear Signal (●) — oscillator crossed below signal line. A small red dot appears on the oscillator. Regime filtering: When enabled, bull crossovers during a Bear Regime are blocked. Bear crossovers during a Bull Regime are blocked. Only signals aligned with the current statistical regime are displayed — this single filter eliminates a significant category of false signals. Main chart overlay: When Overlay Candle Color is enabled: A ▲ green triangle appears below the bar on the main chart at every bull signal. A ▼ red triangle appears above the bar on the main chart at every bear signal. Candles on the main chart are colored using the same gradient as the oscillator — chart candles reflect the current slope momentum state at a glance. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📋 Live Conviction Dashboard A real-time 10-row readout of the oscillator's full internal state, updating on every bar close: SAMPLES — number of regression periods computed per bar based on Min, Max, and Step settings. MODE — INV-VAR WEIGHTED or SIMPLE AVERAGE aggregation. OSC VALUE — live slope oscillator value to six decimal places, green above zero, red below. REGIME — ▲ BULL ZONE, ▼ BEAR ZONE, or — RANGING. Row highlighted in the corresponding color. MOMENTUM — ▲ BUILDING (acceleration positive) or ▼ FADING (acceleration negative). Row highlighted accordingly. SIGNAL — ▲ BULL CROSS / ▼ BEAR CROSS when a crossover fired this bar, or ▲ ABOVE SIG / ▼ BELOW SIG for ongoing position. SIG SPEED — current effective signal length as EMA~N, showing how tight or loose the adaptive signal is in real time. DIVERGENCE — highest-priority active divergence: ▲ BULL DIV, ▼ BEAR DIV, ▲ HIDDEN BULL, ▼ HIDDEN BEAR, or — NONE. Row highlighted when active. CONVICTION — a 0–4 confluence score. Each of the following adds 1 point: regime and oscillator sign agree; regime and acceleration agree; regime and signal side agree; any divergence is active. Score labels — LOW / MIXED (0–1), MODERATE (2), HIGH CONVICTION (3), MAX — ALL ALIGNED (4). OSC (sigma) — the oscillator value expressed as standard deviations from its recent mean. Shows statistically how far momentum has moved from neutral — +2.5s means 2.5 standard deviations into bull territory. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚡ Key Features 🔬 Multi-period regression engine — 19 independent regressions per bar (default) synthesized into one adaptive oscillator value ⚖ Inverse-variance weighting — consistent regression periods carry more weight; noisy periods are automatically discounted 〰 Adaptive signal line — effective EMA length speeds up in trends, slows in chop; current length shown live as EMA~N ⚡ Momentum acceleration histogram — rate-of-change of the oscillator, showing whether momentum is building or fading right now 📊 Statistical regime detection — three-zone classification (Bull / Bear / Range) using rolling mean ± standard deviation bands 🔒 Regime-filtered signals — crossovers opposing the current statistical regime are automatically suppressed ◆ Classic divergence — bull and bear reversal divergence between price pivots and oscillator pivots, bar-close confirmed ◆ Hidden divergence — trend continuation signals when price and oscillator diverge in the trend direction 🎯 Main chart overlay — bull/bear triangles on price chart and gradient candle coloring reflecting live slope momentum 🎨 Dynamic gradient oscillator color — live transition from bear to bull based on rolling 200-bar normalization 📋 Live 10-row conviction dashboard — samples, mode, osc value, regime, momentum, signal, signal speed, divergence, conviction score, sigma reading 🏆 4-point conviction scoring — real-time confluence count across regime, acceleration, signal, and divergence alignment 🔔 10 alert conditions — crossovers, classic and hidden divergences, confluence long/short, zero line crosses 🎨 14 user-configurable color inputs — every visual element independently themeable with AlphaX brand defaults ✅ Confirmed on bar close — no repainting on any signal, divergence, or regime transition ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙ Settings Reference Slope Engine Max Period — upper bound of the regression scan range (default: 100) Min Period — lower bound of the scan range (default: 10) Step Size — increment between scanned periods (default: 5). Smaller = more samples, smoother oscillator. Inverse-Variance Weighting — weight each period by its regression consistency (default: on) Source — price input for all regressions (default: close) Adaptive Signal Line Base Signal Length — signal EMA length in neutral conditions (default: 7) Adaptive Speed — toggle adaptive EMA alpha on or off Momentum Acceleration Show Acceleration Histogram — toggle the background column histogram Acceleration Smoothing — EMA smoothing period for acceleration (default: 3) Regime Detection Show Regime Bands — toggle threshold lines and background tinting Regime Lookback — rolling window for mean and standard deviation (default: 200) Regime Sensitivity (σ×) — standard deviation multiplier for thresholds (default: 0.5) Divergence Engine Show Divergences — toggle all divergence detection Divergence Pivot Length — bars on each side to confirm a divergence pivot (default: 5) Show Hidden Divergences — toggle hidden divergence independently Entry Signals Show Crossover Signals — toggle oscillator signal dots Regime-Filtered Signals — suppress signals opposing the current regime Overlay Candle Color — toggle main chart triangles and gradient candle coloring Dashboard Show Dashboard — toggle the dashboard panel Position — Top Right, Top Left, Bottom Right, Bottom Left Theme Bull Primary / Bright / Dim — three shades of the bullish color family Bear Primary / Bright / Dim — three shades of the bearish color family Neutral / Neutral Light — neutral and secondary text colors Accel Bull / Accel Bear — acceleration histogram column colors Divergence Bull / Divergence Bear — classic divergence marker colors Hidden Div Bull / Hidden Div Bear — hidden divergence marker colors ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🚀 How to Trade with AlphaX Slope Spectrum Pro — Step by Step Step 1 — Establish the regime and directional bias Check the REGIME row. ▲ BULL ZONE = the market is in a statistically confirmed trend upward. ▼ BEAR ZONE = confirmed trend downward. — RANGING = no directional edge. Only trade in the direction of the active regime. Check OSC (sigma). A reading above +2s means deep bull territory. Below −2s means deep bear territory. Near zero = flat momentum, no edge. Step 2 — Read acceleration for entry timing In a Bull Regime, wait for the acceleration histogram to turn green (▲ BUILDING on the dashboard). This means the slope oscillator is accelerating — momentum is growing, not just present. The ideal entry timing: Bull Regime + oscillator above zero + acceleration building + oscillator above signal line. Entering while acceleration is red (▼ FADING) in a bull regime risks entering as the current wave is losing steam. Step 3 — Enter on a signal crossover A bull signal dot (oscillator crosses above signal line) with regime filtering enabled is your entry trigger — counter-trend crossovers are already blocked automatically. If Overlay is enabled, the ▲ triangle on the main chart confirms the exact entry bar. The faster the adaptive signal (lower EMA~N), the tighter the crossover timing. In strong trends the signal shortens and reacts more quickly. Step 4 — Upgrade conviction with divergence A bull signal crossover occurring simultaneously with or just after a Classic Bull Divergence (DIV ▲) = high-probability reversal setup. A bull signal crossover during an uptrend following a Hidden Bull Divergence (H ▲) = high-probability trend continuation setup. Check CONVICTION. Score of HIGH CONVICTION (3) or MAX — ALL ALIGNED (4) means multiple independent factors agree. These are the setups to prioritize. Step 5 — Exit when momentum confirms the move is ending Acceleration histogram turning red (▼ FADING) while you are long = first sign the current wave is losing force. Begin monitoring for exit. A bear signal crossover (oscillator crosses below signal line) = exit trigger. A regime shift from Bull Zone to Ranging or Bear Zone = structural move is over. Exit and reset. A Classic Bear Divergence appearing while you are in a long position = warning. Price is printing new highs the oscillator is not confirming. Reduce size or prepare to close. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔔 Alert Conditions SSP — Bull Crossover — oscillator crossed above the adaptive signal line SSP — Bear Crossover — oscillator crossed below the adaptive signal line SSP — Classic Bull Divergence — price lower low, oscillator higher low confirmed SSP — Classic Bear Divergence — price higher high, oscillator lower high confirmed SSP — Hidden Bull Divergence — price higher low, oscillator lower low (trend continuation) SSP — Hidden Bear Divergence — price lower high, oscillator higher high (trend continuation) SSP — CONFLUENCE LONG — bull crossover occurring with bull or hidden bull divergence simultaneously SSP — CONFLUENCE SHORT — bear crossover occurring with bear or hidden bear divergence simultaneously SSP — Zero Line Cross Up — oscillator crossed above zero (macro bull momentum shift) SSP — Zero Line Cross Down — oscillator crossed below zero (macro bear momentum shift) All alert messages include {{ticker}} and {{interval}} for webhook integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 👥 Who This Is For 🧠 Systematic and quantitative traders — the regression engine, inverse-variance weighting, and statistical regime framework provide a mathematically grounded, objective momentum reading with no arbitrary indicator parameters to tune 📈 Trend traders on any instrument and timeframe — the multi-period scan adapts naturally to any market's momentum characteristics without manual recalibration 🔍 Divergence traders — four divergence types covering both reversals and trend continuations, all confirmed on bar close ⚡ Momentum traders — the acceleration histogram adds a layer no standard oscillator provides: not just where momentum is, but whether it is growing or shrinking right now 🎯 Precision entry traders — regime filtering, adaptive signal speed, and the conviction score ensure signals are only shown when multiple independent conditions agree simultaneously 🎨 Traders who customize their charts — 14 fully user-configurable color inputs, compatible with any chart theme 🔔 Alert-driven traders and bot operators — 10 alert conditions including a dedicated confluence alert for maximum-conviction setups ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 📝 Notes All signals are confirmed on bar close only. Slope Spectrum Pro does not repaint. The oscillator value is in units of log-price per bar. The absolute value is very small (typically 0.000001 to 0.001 range) — what matters is the sign, the direction of change, and where it sits relative to regime thresholds and zero. Wider Min–Max scan ranges produce a smoother oscillator capturing broader trend consensus. Narrower ranges are more reactive to short-term changes. Smaller Step Size = more periods sampled per bar = smoother result. Regime Sensitivity is the most impactful setting after the scan range. At 0.5σ (default) the regime bands trigger relatively frequently. At 1.0–1.5σ, only very strong trend episodes qualify — signals become rarer but higher quality. On very low timeframes the nested regression loop may be computationally intensive. Default settings are optimized for timeframes from 1 minute upward on standard instruments. All theme color defaults are designed for dark chart backgrounds. Adjust Theme inputs if using a light background. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚠ Disclaimer This indicator is a technical analysis and visualization tool intended for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. All signals are generated from historical and real-time price data using mathematical calculations — their accuracy or profitability is not guaranteed. Past performance does not guarantee future results. Always conduct your own analysis, use proper risk management, and consult a licensed financial advisor before making any trading decisions. The author accepts no responsibility for any losses incurred from the use of this indicator. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for traders who want to know not just where momentum is — but how it got there, how strong it is, and whether it is still building.
Pine Script® indicator
by AlphaX-Trade
2
Axis Pressure Cartography [JOAT]Axis Pressure Cartography Introduction Axis Pressure Cartography is an open-source normalized pressure oscillator that measures how far price has deviated from a configurable moving average and classifies the resulting state into constructive, compressed, or overheated conditions. Core Concepts 1. Normalized MA distance Price is measured against a configurable moving average and normalized against recent maximum deviation so different volatility regimes remain interpretable on the same scale. 2. State persistence Pressure states are held using a confirmation window rather than flipping instantly on small changes, which reduces noise and creates a more stable regime read. 3. Envelope logic Pressure envelopes define structural bounds around the oscillator so extreme expansion can be recognized as a separate state from ordinary constructive trend pressure. Features Normalized pressure oscillator and signal Compression, expansion, and overheated-state classification Envelope rails and pressure background tint Compact institutional dashboard Confirmed alerts for flips, releases, and exhaustion transitions Disclaimer This indicator is educational only. Extreme pressure can persist longer than expected, and compression can resolve in either direction.
Pine Script® indicator
by officialjackofalltrades
Smart Quant Money Execution Signals [Rehankhanani]The Smart Quant Money Execution Signals indicator is a powerful multi-factor trading system designed to help traders identify high-probability market opportunities using institutional-grade logic. This indicator combines trend, momentum, strength, and price structure into a single unified framework, eliminating the need to rely on multiple separate tools. Built using a 5-factor confirmation model, the system integrates EMA trend analysis, RSI momentum, ADX strength, MACD confirmation, and Smoothed Heiken Ashi (SHA) to filter out low-quality setups and highlight only strong trading conditions. Unlike traditional indicators that rely on a single signal, this system uses a scoring-based probability engine, ensuring that trades are only generated when multiple confirmations align. This significantly improves signal quality and reduces noise in volatile markets. ⚙️ Key Features ✔ Multi-Factor Signal Engine (EMA + RSI + ADX + MACD + SHA) ✔ Smart Probability Scoring System (0% – 100%) ✔ Strong Buy / Sell Signals (80%+ Confidence) ✔ Automatic Entry, Stop Loss, and Take Profit Levels ✔ Dynamic Risk-to-Reward Ratio Calculation ✔ Smoothed Heiken Ashi for Trend Clarity ✔ Real-Time Professional Dashboard ✔ Clean BUY / SELL Labels on Chart ✔ Candle Highlighting for Signal Confirmation 🎯 How It Works The indicator evaluates 5 core market conditions: 📈 Trend Direction (EMA 9/21) 📊 Momentum (RSI) 📉 Trend Strength (ADX) 🔄 Momentum Confirmation (MACD) 🕯️ Price Structure (Smoothed Heiken Ashi) Each condition contributes 20% to the overall score, creating a total probability rating: 80% – 100% → Strong Trade Signal 60% – 80% → Moderate Setup Below 60% → No Trade / Low Probability Signals are only triggered when multiple factors align, ensuring higher reliability. 💡 Advantages of This Indicator 🔹 Reduces False Signals By combining multiple indicators, the system filters out weak setups and focuses only on high-quality trades. 🔹 Institutional-Level Logic This is not a basic crossover system — it mimics how professional traders analyze markets using confluence. 🔹 All-in-One Solution No need to switch between multiple indicators — everything is integrated into one clean system. 🔹 Clear Trade Execution Entry, Stop Loss, and Take Profit levels are automatically calculated, helping traders manage risk effectively. 🔹 Improved Trend Clarity Smoothed Heiken Ashi removes market noise and makes trend direction easier to identify. 🔹 Probability-Based Decision Making Instead of guessing, traders can rely on a structured probability model. 🧠 Best For ✔ Intraday Traders ✔ Swing Traders ✔ Crypto / Forex / Indices / Stocks ✔ Traders looking for high-probability setups ✔ Traders who prefer structured decision-making ⚠️ Important Note This indicator is designed to assist decision-making and does not guarantee profits. Always apply proper risk management and trading discipline. "Trade smarter, not harder — let multi-factor confirmation guide your decisions with precision and confidence."
Pine Script® indicator
by rehankhanani
1
Asymmetric Volatility Trend Line [QuantAlgo]🟢 Overview Asymmetric Volatility Trend Line is a trend-following indicator built on adaptive standard deviation thresholds rather than fixed bands or moving average crossovers. It quantifies the statistical volatility of recent price movement to determine asymmetric conditions for trend continuation versus trend reversal, then uses those conditions to anchor a dynamic trend line that adjusts position in response to confirmed directional moves, helping traders distinguish between genuine breakouts and noise-driven fluctuations across every timeframe and market. 🟢 How It Works The foundation of the indicator is a rolling standard deviation applied to the selected price source over a configurable lookback window, scaled by a threshold multiplier to produce the volatility boundary used in all trend logic: vol_threshold = ta.stdev(src, lookback) * threshold_mult This threshold is intentionally asymmetric in application. When the trend line is in a bullish state, a smaller fraction of the threshold (0.5x) is required for price to confirm continuation, while a full threshold breach in the opposite direction is needed to trigger a reversal. The same asymmetry applies in reverse during bearish states: if trend_dir >= 0 if src > trend_line + vol_threshold * 0.5 trend_line := math.max(trend_line, src - vol_threshold * 0.25) trend_dir := 1 else if src < trend_line - vol_threshold trend_line := src + vol_threshold * 0.25 trend_dir := -1 This design means continuation requires less evidence than reversal. A directional move only needs to exceed half the volatility threshold to sustain the current trend, but must overcome the full threshold to flip it. The 0.25x offset applied when repositioning the trend line keeps it anchored within the volatility envelope rather than jumping directly to price, producing a smoother line that does not overreact to a single bar. When a reversal is confirmed, the trend line is placed on the opposite side of price at a quarter-threshold distance, giving it room to develop without immediately triggering another flip: trend_line := src + vol_threshold * 0.25 // repositioned on bearish flip trend_dir := -1 Direction state is tracked through two integer variables, with reversal conditions derived from comparing the current and prior bar states: turned_bullish = trend_dir == 1 and trend_dir == -1 turned_bearish = trend_dir == -1 and trend_dir == 1 is_reversal = trend_dir != prev_dir and bar_index > 0 🟢 Signal Interpretation ▶ Bullish Trend (Green): When price closes above the trend line by more than half the volatility threshold, the indicator enters bullish mode with green colouring applied across the trend line, gradient fill, and reversal marker (⦿). This state persists until price closes below the trend line by the full volatility threshold, allowing normal pullbacks to occur without triggering a direction change. ▶ Bearish Trend (Red): When price closes below the trend line by more than half the volatility threshold, the indicator enters bearish mode with red colouring across all visual elements. A full threshold breach to the upside is required to exit this bearish state. 🟢 Features ▶ Preconfigured Presets: Three parameter sets cover different trading approaches. "Default" targets swing trading on 4-hour and daily charts with moderate threshold sensitivity. "Fast Response" reduces the volatility barrier and shortens the lookback for intraday charts where the indicator needs to adapt to shorter-duration moves. "Smooth Trend" raises the reversal threshold substantially for position trading on daily and weekly timeframes, where the cost of a false flip is higher than the cost of a delayed one. Selecting a preset overrides the individual multiplier and lookback inputs. ▶ Built-in Alerts: Three alert conditions cover all directional states. "Bullish Trend Signal" fires on the bar where the trend direction flips from bearish to bullish. "Bearish Trend Signal" fires on the bar where it flips from bullish to bearish. "Any Trend Change" combines both into a single condition for traders who want a unified notification regardless of direction. ▶ Visual Customisation: Six colour presets (Classic, Aqua, Cosmic, Cyber, Neon, and Custom) apply coordinated bullish and bearish colour schemes across the trend line, gradient fill, reversal markers, and optional bar and background colouring. Bar colouring tints price candles with the active trend colour at a configurable transparency level, and background colouring extends the directional tint across the full chart pane. Both are disabled by default and controlled independently.
Pine Script® indicator
by QuantAlgo
7
Aegis Arc Framework [JOAT]Aegis Arc Framework Introduction Aegis Arc Framework is an open-source anchored-trend overlay built to classify directional pressure through the interaction of three continuously updated reference systems: a confirmed trailing arc, anchored VWAP regime alignment, and ATR-normalized extension pressure. The script is designed to provide structured directional context without relying on repainting shortcuts or visually noisy retail markers. The main problem Aegis Arc Framework solves is trend persistence versus trend exhaustion. Price can remain above a trailing framework while already becoming stretched relative to value. It can also reclaim value while a trend is still technically intact. Aegis addresses that by combining a ratcheting confirmed trail with session, weekly, and monthly VWAP context so the user can distinguish continuation, weak extension, and blocked transition states. Core Concepts 1. Anchored VWAP Regime Gate The indicator maintains manually anchored session, weekly, and monthly VWAP references and checks whether the active trend is aligned with those value anchors. Depending on the selected mode, the gate can require Session, Week, Month, Any, or All alignment before the dashboard and confirmed state fully agree with the direction of the arc. bool s = bullish ? close >= vwapSession : close <= vwapSession bool w = bullish ? close >= vwapWeek : close <= vwapWeek bool m = bullish ? close >= vwapMonth : close <= vwapMonth 2. Ratcheted Arc Trail The main trail is not a static moving average. It is a ratcheting arc that updates on confirmed bars, accelerates toward the active target band, and decays its internal velocity over time. This makes the line responsive during directional expansions while still preserving a smooth institutional appearance. 3. Extension Pressure Distance from the active anchored VWAP is normalized by ATR and converted into an acceleration modifier. When price becomes stretched from value, the trail responds more aggressively. This helps expose when a trend is still directional but increasingly extended. 4. Confirmed Flip Logic A trend flip is only confirmed on closed bars. The trail state does not anticipate future movement or use future references. This keeps the overlay safe for real-time use and consistent with non-repainting publication standards. 5. Forward Flip Levels Each confirmed directional transition creates a horizontal level that extends forward until invalidated or aged out. These levels act as persistent decision references and help frame whether price is defending or losing prior transition zones. Features Anchored value logic: Session, weekly, and monthly VWAP tracking with selectable regime gate modes ATR-based arc framework: Confirmed-bar ratcheting trail with velocity decay and acceleration logic Extension awareness: ATR-normalized distance from value used to classify whether the active move is orderly or stretched Persistent transition levels: Confirmed flip levels extend forward and self-clean when broken or aged out Institutional visual shell: Trail glow, clean cloud fill, optional candle tint, and compact top-right dashboard No retail markers: The script avoids arrows and clutter-focused signal decoration Confirmed-bar logic: Trend transitions and level invalidations are gated by confirmed bars only Input Parameters Core Trajectory: ATR Length Trail Distance (ATRx) Base Acceleration Velocity Decay Velocity Cap Minimum Chase / Maximum Chase Run Window Minimum Flip Gap VWAP Regime: Regime Mode: Session, Week, Month, Any, All VWAP Speed Boost Show Selected VWAP Visual System and Levels: Bull, bear, and neutral palette controls Cloud, trail glow, and candle tint toggles Confirmed flip level styling and retention controls Dashboard display toggle How to Use This Indicator Step 1: Read the active regime Check whether price is above or below the confirmed trail and whether the dashboard shows value alignment with the selected anchored VWAP mode. Step 2: Judge extension Use the extension and acceleration rows in the dashboard to determine whether the move is orderly or increasingly stretched from anchored value. Step 3: Use flip levels as structure references When a confirmed transition occurs, the generated forward level becomes a practical decision point for retests, failures, and continuation checks. Step 4: Combine with execution tools Aegis is best used as a directional and structural context layer. It can filter other entry models by allowing long setups only when the trail and value regime agree, and short setups only when the opposite condition is present. Indicator Limitations Anchored VWAP alignment may temporarily lag during very early reversals, especially when a higher anchor such as the weekly reference is selected The arc can tighten quickly during extreme volatility because acceleration is intentionally sensitive to extension pressure Flip levels are contextual structure references, not guaranteed support or resistance The script classifies directional state and extension; it does not predict future price movement Originality Statement Aegis Arc Framework is original in the way it combines a confirmed ratcheting trail, anchored VWAP regime gating, extension-driven acceleration, and managed forward flip levels into one coherent overlay. It is published because the combination is meaningfully different from a standard SuperTrend, a standalone VWAP overlay, or a simple trailing stop line. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice and does not recommend any specific trade or investment. All calculations are derived from historical and real-time chart data and can produce false signals. Trading involves substantial risk. Always use independent judgment and risk management.
Pine Script® indicator
by officialjackofalltrades
Mobile Wallstreet Confidence IndicatorMobile Wallstreet Confidence Indicator Most indicators lie to you. They fire signals on every candle, flood your chart with noise, and leave you holding the bag wondering what went wrong. This one is different. The Mobile Wallstreet Confidence Indicator was engineered to stay silent until the market is genuinely ready — and when it fires, you'll know exactly why and exactly how confident the setup is. HOW IT WORKS Every signal passes through a strict 6-layer filter system before a single arrow appears on your chart: 1. Multi-Timeframe Stack (M15 / H1 / H4 / D1) The indicator reads all four timeframes simultaneously using a triple EMA alignment model. You control how many must agree before a signal is even considered. No more trading against the higher timeframe trend. 2. Hull MA Momentum Gate Price must be on the correct side of a rising or falling Hull MA. If momentum isn't confirmed, the signal is blocked — full stop. 3. ATR Depth & Range Filter The market must show meaningful range and retrace depth relative to ATR. Flat, choppy, low-conviction price action gets filtered out automatically. 4. Structure Clearance Signals won't fire into overhead resistance or below key support. The indicator measures structure clearance in ATR units so it adapts to every market and every volatility environment. 5. Pattern Rank (0–10) Each setup is scored across 5 criteria — EMA alignment, RSI momentum, structure break, candle body strength, and price position. Only setups above your minimum rank threshold make the cut. 6. Confidence Score (0–100) Every signal comes with a live confidence score weighted across MTF agreement, trend alignment, Hull momentum, RSI strength, and pattern rank. You see the number. You decide your conviction. WHAT YOU GET ON THE CHART 🟢 BUY arrow — all layers aligned bullish, confidence threshold met 🔴 SELL arrow — all layers aligned bearish, confidence threshold met 📊 MTF Dashboard — live top-right panel showing M15 / H1 / H4 / D1 direction, bull/bear counts, confidence scores, pattern ranks, and a plain-English status message telling you exactly what the market is waiting on 🏷️ Signal Labels — confidence score and pattern rank printed directly on every arrow so you never have to guess signal quality FULLY CUSTOMIZABLE Every parameter is adjustable to fit your trading style: Execution timeframe Fast / Slow EMA periods Hull MA period ATR period Number of MTF timeframes required to agree Minimum confidence score threshold Minimum pattern rank threshold Retrace depth multiplier Structure clearance multiplier Structure lookback window Toggle new signals only, labels, and dashboard on/off BUILT-IN ALERTS Set TradingView alerts on BUY and SELL signals and never miss a setup — whether you're watching the screen or not. WHO THIS IS FOR This indicator is for traders who are done with noise. If you want a tool that thinks before it speaks, filters relentlessly, and gives you full transparency on every signal it generates — this was built for you. Swing traders. Day traders. Multi-timeframe operators. Anyone who trades with a plan. Mobile Wallstreet. Confidence on every candle.
Pine Script® indicator
by DrLexWilson
Volumetric Trend Structure [BOSWaves]Volumetric Trend Structure - Pivot-Averaged Drift Detection with Volume-Normalized Band Visualization Overview Volumetric Trend Structure is a pivot-anchored trend identification system that constructs dynamic drift lines from the rolling average of confirmed swing highs and lows, where trend direction, band positioning, and volume histogram behavior are driven by structural pivot accumulation and statistically normalized volume measurement rather than fixed moving average thresholds or arbitrary volatility multiples. Instead of relying on lagged moving average crossovers or static band calculations, trend state and directional reference levels are determined through confirmed pivot detection, multi-pivot averaging for drift line construction, and standard deviation-normalized volume scoring that adapts bar-by-bar to reflect genuine volume significance relative to recent history. This creates a trend framework grounded in actual price structure rather than smoothed price derivatives. Drift lines move only when new confirmed pivots shift the structural average, trend state responds to price crossing structurally-derived boundaries, and the volume histogram mounted directly on the active band provides a continuously updating picture of volume participation intensity and directional character at the exact level that defines the current trend. Price is therefore evaluated against drift boundaries that represent real swing structure rather than indicator-generated levels disconnected from market geometry. Conceptual Framework Volumetric Trend Structure is founded on the principle that robust trend boundaries should be derived from confirmed price structure pivots and their rolling averages, not from smoothed price series that shift continuously regardless of whether meaningful structural events have occurred. Traditional trend-following methods anchor bands and trend references to exponential or simple moving averages that update on every bar and carry no structural significance in isolation. This framework replaces continuous-update logic with pivot-event-driven drift construction, where the upper and lower drift lines only shift when a new confirmed swing high or low is recorded, ensuring the boundaries reflect actual market structure rather than arithmetic price smoothing. Three core principles guide the design: Trend boundaries should emerge from confirmed pivot structure and their averages, providing structurally meaningful levels rather than arbitrary smoothed references. Volume should be measured relative to its own statistical distribution, normalizing significance across instruments and timeframes rather than using raw absolute values. Volume visualization should be anchored to the active structural boundary, directly connecting participation data to the trend level that defines current directional state. This shifts trend analysis from continuous moving average mechanics into event-driven structural drift tracking with volume participation mapped directly onto the defining boundary. Theoretical Foundation The indicator combines confirmed pivot high and low detection, rolling pivot array averaging for drift line construction, standard deviation-normalized volume measurement, and directional volume gradient coloring across three configurable display modes. Pivot highs and lows are confirmed using a configurable left-right bar requirement, ensuring only structurally validated swing points contribute to drift calculation. A rolling array of recent pivots feeds the upper and lower drift lines, with the average shifting only as new pivots register. Volume normalization divides raw volume by its rolling standard deviation, producing a dimensionless score that objectively ranks each bar's participation relative to recent history. Volume histogram bars are then plotted directly on the active drift band, scaled by the normalized score and oriented in the trend direction. Four internal systems operate in tandem: Pivot Detection and Array Management : Identifies confirmed swing highs and lows through the configurable pivot length parameter, maintaining rolling arrays of the most recent qualifying pivots for both upper and lower drift calculations. Drift Line Construction : Averages the contents of each rolling pivot array to produce upper and lower drift lines that update only when new confirmed pivots register, anchoring the trend framework to real structural events. Trend State Logic : Monitors price crossovers and crossunders of the upper and lower drift lines respectively, flipping trend state and reassigning the active band between the upper and lower drift lines based on current direction. Volume Normalization and Histogram Engine : Calculates a standard deviation-based volume score, scales it to the chart's price range, and plots histogram bars on the active drift band with configurable directional coloring and spike detection. This design allows trend structure to reflect genuine pivot-based market geometry while volume participation is measured and visualized with statistical objectivity. How It Works Volumetric Trend Structure evaluates price through a sequence of structure-aware processes: Pivot Confirmation : Swing highs and lows are confirmed when the specified number of bars to the left and right all print lower highs or higher lows respectively, validating structural significance before the pivot is registered. Array Update and Drift Recalculation : Each newly confirmed pivot is appended to its respective rolling array and the oldest entry removed if the array exceeds the configured pivot count, triggering immediate recalculation of the corresponding drift line average. Trend Crossover Evaluation : On each bar, price is tested against both drift lines. A crossover above the upper drift establishes bullish state, and a crossunder below the lower drift establishes bearish state, with the previously opposing drift line becoming the new active band. Active Band Assignment : In a bullish trend, the lower drift line serves as the active structural band providing support reference. In a bearish trend, the upper drift line serves as the active structural band providing resistance reference. Volume Normalization : Each bar's raw volume is divided by its 200-bar rolling standard deviation, producing a normalized score capped at four standard deviations that objectively quantifies participation intensity. Histogram Scaling : The normalized volume score is multiplied by a range-derived step size based on the 200-bar average bar range, producing price-unit histogram heights that scale appropriately to the chart without manual adjustment. Volume Color Assignment : Depending on the selected color mode, histogram bars are colored by buy/sell pressure gradient derived from close position within the bar range (Delta), uniform trend direction (Trend), or trend direction with statistical spike highlighting (Trend + Spikes). Spike Detection : Bars reaching four standard deviations of volume receive spike classification, triggering directional spike markers and overriding base color in applicable color modes. Signal and Visual Output : Trend state transitions generate buy and sell triangle labels. Candles are colored with a volume-intensity gradient that brightens with participation strength. A trend fill extends between the active band and price for directional context. Together, these elements form a continuously updating structural trend map where pivot geometry defines the boundaries and volume participation is measured and displayed with statistical precision directly on those boundaries. Interpretation Volumetric Trend Structure should be interpreted as a pivot-derived structural trend system with volume participation mapped onto the active directional boundary: Bullish Trend State (Green) : Established when price closes above the upper drift line, with the lower drift line becoming the active support band and volume histogram projecting upward from it. Bearish Trend State (Magenta) : Established when price closes below the lower drift line, with the upper drift line becoming the active resistance band and volume histogram projecting downward from it. Drift Lines : Upper and lower structural boundaries derived from rolling averages of recent confirmed pivot highs and lows. These lines only shift when new confirmed pivots register, ensuring structural relevance. Active Band : The drift line currently serving as the primary structural reference. The lower drift in a bullish trend and the upper drift in a bearish trend are displayed with a solid colored line and serve as the histogram anchor. Trend Fill : Gradient fill between the active band and price provides a continuous visual representation of the distance and directional relationship between current price and the structural boundary. Volume Histogram : Normalized volume bars extending from the active drift band reflect statistically scaled participation intensity on each bar, oriented upward in a bull trend and downward in a bear trend. Delta Color Mode : Histogram bars colored by close-position gradient within the bar range, revealing whether volume on each bar was associated with buying or selling pressure regardless of trend direction. Trend Color Mode : Uniform histogram coloring by current trend direction, providing a clean structural participation view without directional bar-level interpretation. Trend + Spikes Mode : Trend-colored histogram with statistical spike bars highlighted in a distinct color, identifying exceptional participation events against the structural background. ◆ Spike Markers : Diamond labels plotted at bar highs in a bull trend and lows in a bear trend on statistically exceptional volume bars, marking participation outliers for immediate identification. ▲ / ▼ Trend Signals : Triangle labels at trend state transitions mark the crossover bar where the structural drift boundary was breached, providing clear visual anchoring of each directional change. Colored Candles : Optional bar coloring reflects trend direction with intensity graduating from muted at low volume to fully saturated at peak participation, providing an immediate conviction reading. Note: The original chart candles must be disabled in chart settings for the trend-colored candles to display properly. Drift line positioning, active band proximity, and volume histogram behavior at the structural boundary collectively provide more information than any element in isolation. Signal Logic & Visual Cues Volumetric Trend Structure presents two primary structural interaction signals alongside continuous volume participation monitoring: Buy Signal (▲) : Green triangle appears when price closes above the upper drift line, marking the structural crossover that establishes bullish trend state and reassigns the lower drift as the active support band. Sell Signal (▼) : Red triangle appears when price closes below the lower drift line, marking the structural crossunder that establishes bearish trend state and reassigns the upper drift as the active resistance band. Volume spike detection provides continuous secondary context, with statistical outlier bars marked regardless of trend state to identify exceptional participation events that may precede structural developments. Alert generation covers bullish and bearish trend state transitions for systematic structural monitoring workflows. Strategy Integration Volumetric Trend Structure fits within structural trend-following and volume-informed directional approaches: Structure-Confirmed Entries : Use drift line crossovers as trend initiation points where price has demonstrated sufficient strength to breach a structurally-derived boundary, rather than reacting to moving average crossovers with no pivot significance. Active Band Pullback Framework : Use the active drift band as a pullback reference within established trends, monitoring volume histogram behavior at the band for participation evidence supporting continuation. Volume Spike Context : Treat spike events occurring near the active drift band as elevated-significance participation readings. Spikes confirming the trend direction at the band suggest strong structural support or resistance. Delta Mode Flow Analysis : In Delta color mode, monitor the directional gradient of histogram bars at the active band to assess whether volume at the structural boundary is predominantly buying or selling pressure. Pivot Count Sensitivity Adjustment : Reduce the Pivots to Average count for instruments requiring faster structural adaptation. Increase for markets where drift stability across more pivots better reflects the dominant trend. Multi-Timeframe Structural Alignment : Apply higher-timeframe drift line positions as directional context, confirming that lower-timeframe entries align with the broader structural trend defined by multi-pivot averaging. Technical Implementation Details Core Engine : Confirmed pivot high and low detection with configurable left-right bar requirement Drift Construction : Rolling array averaging of recent confirmed pivots with configurable array depth Trend Logic : Drift line crossover and crossunder state switching with active band reassignment Volume Normalization : Standard deviation-based scoring over 200-bar rolling window with four standard deviation cap Histogram Scaling : Range-derived step sizing using 200-bar average bar range for chart-adaptive bar heights Color Engine : Three-mode volume coloring with gradient delta, uniform trend, and trend with spike override Visualization : Band-anchored volume histogram, trend fill gradient, volume-intensity candle coloring, and signal labels Performance Profile : Optimized for real-time execution with max_bars_back configuration supporting deep historical pivot detection Optimal Application Parameters Timeframe Guidance: 1 - 5 min : Intraday structural drift tracking with tighter pivot lengths for faster structural response 15 - 60 min : Session-level trend structure identification with balanced pivot and averaging settings 4H - Daily : Swing-level structural trend mapping with higher pivot counts for stable, well-defined drift lines Suggested Baseline Configuration: Pivot Length : 3 Pivots to Average : 4 Volume Size : 1.0 Volume Histogram : Enabled Volume Color Mode : Trend + Spikes Color Candles : Enabled (requires disabling original chart candles in chart settings) Trend Fill : Enabled These suggested parameters should be used as a baseline; their effectiveness depends on the instrument's structural characteristics, pivot frequency, and preferred trend sensitivity, so fine-tuning is expected for optimal performance. Parameter Calibration Notes Use the following adjustments to refine behavior without altering the core logic: Too many trend flips : Increase Pivot Length to demand more structurally significant swing confirmations, reducing sensitivity to minor price swings that generate short-lived drift line crossovers. Trend too slow to respond : Decrease Pivot Length toward 1 for faster pivot confirmation, or reduce Pivots to Average so fewer historical pivots influence the drift line position. Drift lines too reactive : Increase Pivots to Average to smooth the drift calculation across more structural events, producing more stable trend boundaries that require more significant pivot shifts to move. Drift lines too stable : Decrease Pivots to Average toward 2 for a more responsive drift that closely tracks the most recent structural swings rather than the broader pivot average. Volume bars too large or too small : Adjust Volume Size to scale histogram height relative to the default range-derived step, adapting visibility to the instrument's typical price range and volatility. Spike highlights too frequent : The spike threshold is fixed at four standard deviations and is not user-configurable. Select Trend color mode if spike highlighting creates excessive visual noise on a particular instrument. Delta coloring unclear : Review whether close positioning within the bar range reliably reflects directional pressure on the target instrument before relying on Delta mode for flow analysis. Adjustments should be incremental and evaluated across multiple session types rather than isolated market conditions. Performance Characteristics High Effectiveness: Trending markets with clear swing structure where pivot highs and lows produce well-separated drift lines that provide unambiguous structural boundaries Instruments with consistent volume patterns where standard deviation normalization accurately identifies statistically significant participation events Structural pullback strategies monitoring price returns to the active drift band with volume confirmation Markets where volume participation at swing pivots reliably reflects institutional activity and structural conviction Reduced Effectiveness: Choppy, trendless markets where frequent pivot formation causes rapid drift line convergence and repeated trend state flips without directional follow-through Low-liquidity instruments where volume distribution is erratic and standard deviation normalization produces unreliable spike classifications Markets with irregular pivot structure where swing confirmation requirements cause significant lag in structural boundary updates during fast-moving directional moves Extremely compressed consolidation environments where upper and lower drift lines converge closely, reducing the structural differentiation required for reliable trend state assignment News-driven or gap-heavy instruments where pivot confirmation mechanics miss the structural significance of impulsive moves that do not form clean swing geometry Integration Guidelines Confluence : Combine with BOSWaves momentum tools, order flow analysis, or exhaustion level mapping for structural and conviction-layer confluence Active Band Respect : Monitor volume histogram behavior at the active drift band on each approach. Sustained low-volume retests suggest structural support, while high-volume penetration attempts warrant caution. Pivot Count Awareness : Recognize that drift lines reflect the average of recent pivots rather than just the latest swing. Sharp structural moves may shift the drift line gradually as older pivots roll out of the averaging window. Spike Utilization : Treat spike events as participation outliers deserving contextual analysis rather than automatic signals. Their directional significance depends on location relative to the active band and current trend state. State Discipline : Maintain directional bias aligned with current trend state until the opposing drift line is breached. Short-term price excursions toward the inactive drift line within an established trend do not constitute state changes. Disclaimer Volumetric Trend Structure is a professional-grade pivot-derived trend and volume participation analysis tool. It uses confirmed swing pivot averaging with statistically normalized volume measurement but does not predict future price movements. Results depend on market conditions, instrument structural characteristics, parameter selection, and disciplined execution. BOSWaves recommends deploying this indicator within a broader analytical framework that incorporates momentum context, order flow analysis, and comprehensive risk management.
Pine Script® indicator
by BOSWaves
3
Caldera Relative Pressure [JOAT]Caldera Relative Pressure Introduction Caldera Relative Pressure is an open-source effort-versus-result oscillator designed to measure whether price movement is being supported by participation, directional efficiency, and close location within the bar. It is built to distinguish clean directional drive from absorption, exhaustion, and two-way rotation. The problem this script solves is that raw price movement does not explain whether a move is efficient, forced, rejected, or fading. A wide candle on low participation is not the same as a wide candle with expanding participation and strong close location. Caldera converts candle anatomy, relative volume, range behavior, and baseline context into a structured pressure model that is easier to read in real time. Core Concepts 1. Effort-Versus-Result Framework The script blends three weighted components: Effort: candle body and directional spread relative to true range Result: directional efficiency relative to ATR Location: where the bar closes inside its own range, adjusted by wick pressure Those three parts are multiplied by relative volume so that quiet moves and committed moves do not receive the same score. 2. Directional Drive Detection Bull and bear drive states require a sufficiently large composite pressure reading, positive spread between the composite and its signal line, and close location agreement. This keeps small or conflicted moves from being treated as decisive tape control. 3. Absorption Detection Absorption is identified by unusually strong volume combined with limited body progress and asymmetric wick behavior. In practical terms, that means participation increased but result did not expand proportionally. This is often a useful clue that one side is meeting aggressive pressure with passive liquidity. 4. Exhaustion Detection The script also tracks exhaustion. It compares the current pressure state with recent pressure extremes and short-term momentum fade. A move can still be directionally positive or negative while simultaneously losing efficiency. 5. Multi-Layer Pressure Visualization The pane includes a histogram, composite line, signal line, drive quality line, balance line, participation band, efficiency band, location band, rotation ribbon, and reference ladders. These are separate on purpose: The histogram shows raw directional pressure The composite and signal lines show state and rotation Drive quality shows how healthy the move is Participation, efficiency, and location bands show what is contributing to the reading Features Composite pressure engine: Candle anatomy, ATR efficiency, location, and relative participation Bull and bear drive states: Measures directional initiative Bull and bear absorption states: Flags high-effort / low-result behavior Bull and bear exhaustion states: Flags fading pressure after prior extremes Baseline context filter: Can require price to align with a directional baseline Drive quality and balance lines: Separate force from quality Participation, efficiency, and location bands: Show what is driving the current reading Rotation ribbon: Highlights positive and negative carry Dashboard summary: State, bias, strength, regime, context, participation, quality, balance, rotation, and compression Input Parameters Core Engine: Relative Volume Length Range Normalization Length Baseline Context Length Signal Smoothing Pressure Model: Effort Weight Result Weight Location Weight Drive Threshold Expansion Threshold State Logic: Absorption Volume Z Absorption Range Cap Exhaustion Lookback Recent State Window Baseline Context Filter toggle How to Use This Indicator Step 1: Read the State Row The State row tells you whether the market is currently showing directional drive, absorption, exhaustion, or balance. This is the first layer of interpretation. Step 2: Compare Pressure With Quality A strong pressure reading with weak drive quality can be unstable. A smaller pressure reading with improving quality can be more constructive. Use those two together rather than treating histogram height alone as the answer. Step 3: Inspect Participation, Efficiency, and Location These bands explain why the model is leaning in one direction. If participation is strong but efficiency is weak, the move may be absorption. If efficiency and location are strong but participation is weak, the move may be less durable. Step 4: Watch the Rotation Ribbon Rotation tells you whether pressure is continuing, stabilizing, or turning. This can be useful for early changes in internal character even when the headline state has not fully flipped yet. Indicator Limitations Relative volume is broker and instrument dependent, so the same thresholds may not transfer perfectly across markets Absorption and exhaustion are contextual states, not guaranteed turning points High-volatility event bars can temporarily distort effort-versus-result relationships A baseline filter improves context but can delay state recognition during sharp reversals Originality Statement Caldera Relative Pressure is original in the way it turns candle anatomy, participation, efficiency, and location into a layered pressure model with separate drive, absorption, and exhaustion states. The script is not a simple volume oscillator or candle-coloring tool. Its design is centered on explaining how price is moving, not only how far it moved. Disclaimer This script is provided for educational and informational purposes only. It is not financial advice. Pressure readings are based on historical bar data and can misclassify conditions during abnormal liquidity or fast event-driven moves. Always use independent confirmation and prudent risk management.
Pine Script® indicator
by officialjackofalltrades