Get started

Premarket

IrishGOD PDH/PDL Zones + Pre-Market H/L + MA RibbonPDH/PDL Zones + Pre-Market H/L + MA Ribbon A comprehensive overlay indicator for TradingView (Pine Script v5) that combines three institutional-grade tools on a single chart: historical previous-day high/low zones drawn from full candle wicks, intraday pre-market extremes, and a fully configurable multi-timeframe moving average ribbon. Designed for intraday traders who need clean, actionable levels without switching between charts or timeframes. Pine Script v5 Overlay Intraday Multi-Timeframe Alerts Included 1 Previous Day High / Low Zones Automatically identifies the highest and lowest candle of each prior session and draws a shaded zone that spans the full wick of that candle — from the wick tip (the session extreme) down to the candle body edge (max or min of open/close). This provides a realistically sized supply or demand zone rather than a single horizontal line, accurately representing the price range where the reversal originated. Zones are stored across up to 50 prior trading days and drawn efficiently on the last bar to avoid unnecessary repainting. Lookback Up to 50 previous days retained and displayed simultaneously Zone geometry Wick tip → candle body edge; minimum 4-tick thickness for doji candles Extension Most recent zone optionally extends to the right edge of the chart Labels PDH / PDL price labels on the latest zone; four size options Color picker Border width 0–4px Adjustable opacity Toggle on/off 2 Pre-Market High / Low Tracks the highest high and lowest low recorded during the configurable pre-market window (default 4:00–9:30 AM Eastern Time) and draws horizontal lines at those levels the moment the regular session opens. These levels are widely watched by professional traders as the first potential support and resistance areas of the day, and are particularly relevant on gap-up or gap-down open days. All time calculations are anchored to America/New_York to handle daylight saving time correctly. Session window Fully configurable start hour, end hour, and end minute (24h ET) Line style Solid, dashed, or dotted; line width 1–4px Extension Lines optionally extend rightward through the rest of the session Labels "PM High" / "PM Low" labels with exact price values Requires a TradingView subscription that includes extended-hours data. Levels reset each new trading day. 3 Multi-Timeframe MA Ribbon A ribbon of up to 8 independent moving averages rendered directly on the price chart. Each MA is fully self-contained: it has its own toggle, length, color, and — critically — its own timeframe selector. This allows a single ribbon to simultaneously display a short-term trend on the current chart timeframe alongside higher-timeframe MAs (e.g. a daily 21 EMA or a weekly 50 SMA) without opening additional chart panes. When an alternate timeframe is active, the value label automatically appends a tag for instant visual identification. MA types available SMA EMA WMA VWMA HMA DEMA TEMA RMA LSMA Ribbon count 8 MAs; MAs 1–5 enabled by default (lengths 8, 13, 21, 34, 55) Per-MA timeframe Each MA resolves on its own timeframe via request.security(); blank = current chart Fill Gradient color fill between consecutive MA lines; adjustable opacity Value labels Live price labels pinned to the right edge; show tag for HTF MAs Source Configurable price source: close, open, high, low, hl2, hlc3, ohlc4, etc. Line width Global line width control (1–4px) applied to all active MAs lookahead=barmerge.lookahead_off is enforced on all request.security() calls to prevent higher-timeframe data leakage into historical bars. 4 Alerts Five built-in alert conditions, configurable from TradingView's alert dialog: Price enters the most recent PDH zone (within 0.1%) Price enters the most recent PDL zone (within 0.1%) Price enters either PDH or PDL zone MA1 crosses above MA2 — bullish signal MA1 crosses below MA2 — bearish signal 5 Technical notes Compatibility Intraday charts (1m – 4h). Requires extended-hours data for pre-market feature. Object limits max_boxes_count 500 · max_lines_count 500 · max_labels_count 200 Rendering PDH/PDL boxes drawn only on barstate.islast to eliminate per-tick redraw overhead DST handling All session time logic uses America/New_York timezone natively
Pine Script® indicator
by irishlenahan
Premarket High/Low - KermezHere's a description you can paste into TradingView's publish form. It follows their publication guidelines (clear explanation, no vague claims, no promotion) and is structured how experienced publishers format theirs. --- **Premarket High/Low** This indicator tracks the highest high and lowest low made during the US equity premarket session (04:00–09:00 ET by default) and projects those two levels as horizontal lines across the regular trading session (09:30–16:00 ET). Many traders use premarket extremes as intraday support and resistance — breaks above the PM high or below the PM low often coincide with momentum moves during regular hours. **How it works** During premarket, the script records the running high and low of that window. Once premarket closes at 09:00, the levels lock in and are drawn as horizontal lines that extend through to the 16:00 close. Lines do not carry over past the close — each trading day gets its own fresh PM range. **Features** - Timezone-aware session detection — works correctly regardless of your chart timezone (default America/New_York, configurable to major exchange zones). - Live range building during premarket so you can watch the levels form in real time. - Projected horizontal lines from 09:00 to 16:00, drawn even before the current bar catches up to 16:00. - Labels at the regular-session open showing the exact PM high and PM low prices. - Optional premarket background tint to visually highlight the session window. - Two built-in alert conditions: **Break above Premarket High** and **Break below Premarket Low**, both restricted to regular trading hours so you aren't woken up by overnight prints. - All colors, line width, and toggles exposed as inputs. **How to use** Apply to any US equity, ETF, or index on an intraday timeframe — 1, 5, or 15-minute charts work best. The indicator will not draw on daily or higher timeframes (by design). Once applied, right-click either plotted line and select "Add alert on…" or use the chart-level Alerts dialog to wire up breakout notifications. **Settings** - *Premarket Window* — default 04:00–09:00. Adjust if you trade a different session. - *Regular Session* — default 09:30–16:00. Used to detect the open bar and restrict alerts. - *Timezone* — set this to match the instrument you're trading. - *Style* — colors, line width, background tint, and label visibility. - *Alerts* — toggle breakout alerts on/off. **Notes** This is an informational tool, not a trading system — the PM high and PM low are reference levels, not signals on their own. Breakouts can and do fail; always combine with your own risk management. Works on any symbol that has meaningful premarket activity; low-volume instruments may produce noisy ranges. Pine Script v6. --- A few practical tips for the rest of the publish form: - **Title** — keep it short, something like `Premarket High/Low`. TradingView rejects titles that sound marketing-y. - **Tags/Categories** — pick Volatility or Trend Analysis; tag with `premarket`, `support`, `resistance`, `breakout`, `day-trading`. - **Screenshot** — TradingView requires one. Take a clean chart shot with the indicator applied, ideally on a liquid name like SPY or QQQ on a 5-min chart showing both lines and a label. Avoid screenshots with other indicators or personal annotations cluttering the view. - **Release notes** — leave blank on first publish; you'll use this field later if you update the script.
Pine Script® indicator
by Keystone2025
WSTM.io | Yesterday & Premarket LevelsWSTM.io | Yesterday & Premarket Levels This indicator automatically plots four key price levels used by professional intraday and futures traders: Yesterday High (YH) Yesterday Low (YL) Premarket High (PMH) Premarket Low (PML) These levels act as liquidity zones where price often reacts through breakouts, rejections, and reversals—making them essential for identifying bias, planning entries, and managing risk. 📊 Session Flexibility (Equities & Futures) Customize how sessions are calculated based on your market: Yesterday Levels RTH Only (9:30am–4:00pm ET) (Recommended for futures & institutional levels) Full 24hr Session (Includes overnight price action) Premarket Levels 4:00am–9:30am ET (Standard equity premarket) 6:00pm–9:30am ET ( Full CME Globex session — ideal for futures: ES, NQ, MES, MNQ) ⚙️ Features Works on all intraday timeframes (1min to 1hr) Accurate session-based calculations across timeframes Clean dashed lines that extend and stay anchored to price Centered labels (YH, YL, PMH, PML) directly on chart Price levels displayed on right-hand axis (color-matched) Fully customizable colors and line width Toggle Yesterday and Premarket levels independently Toggle labels on/off Session dropdowns for quick switching between Equities and Futures modes 🎯 Recommended Settings Futures (ES, NQ, MES, MNQ) Yesterday → RTH Only (9:30am–4:00pm ET) Premarket → 6:00pm–9:30am ET (Overnight Session) Equities Yesterday → RTH Only (9:30am–4:00pm ET) Premarket → 4:00am–9:30am ET ⚠️ Important Extended hours must be enabled in TradingView for premarket data to display correctly.
Pine Script® indicator
by GProfTrades
2
Session Levels - Asia, London, NY, Premarket & Prior DayWhat it shows session highs/lows for Asia, London, premarket, and the NY session during the RTH window; midnight open; NY RTH open and session close; optional NDOG 25% / 50% / 75% vs prior RTH close. Prior day: completed RTH open, high, low, and close from the last RTH session, plus prior calendar day 24h high/low. Untouched liquidity levels: optional highlight (color/line width) until the first qualifying wick/body intersection with the level (see inputs). History: optional list of untouched levels from earlier days (subject to TradingView line/label limits). How to use Set timezone and session strings to match your instrument (default: America/New_York). Enable or disable level groups and adjust colors under Levels and Colors. Use "Untouched liquidity" to emphasize levels that have not yet been traded through per the script rules. If you hit drawing limits, lower "Max untouched historical levels" or turn off historical untouched levels. Limitations Drawing count is capped by max_lines_count and max_labels_count. Very long history may require reducing stored historical levels or zooming to a shorter range. Disclaimer For chart analysis and education only. Past or hypothetical behavior does not guarantee future results. Not financial advice.
Pine Script® indicator
by sebventure82
TJ-US-ORB v1TJ-US-ORB Indicator Inspired by TraderJ's US ORB trading strategy and just fixes the bugs and missing midline in other ORB indicators out there... Enjoy..! The TJ-US-ORB indicator draws horizontal lines based on two key U.S. market 15-minute candles: US PreMarket (default 08:00–08:15 ET) – blue lines. US MarketOpen (default 09:30–09:45 ET) – yellow lines. For each session, the indicator draws: High line – top of the candle Low line – bottom of the candle Midline – average of high and low, configurable style and opacity Lines start at the session candle and extend until 16:00 ET, ensuring no overlap between sessions or days. The indicator works on all chart timeframes from 1-minute to 2-hour. 2️⃣ Settings Tab All configurable settings are grouped into Professional Settings for clarity. US PreMarket Candle Start Time (ET): Time selector for the 15-minute PreMarket candle (default 08:00–08:15). Line Color: Color for high/low lines (default blue). Line Width: Thickness of the lines (default 1). US MarketOpen Candle Start Time (ET): Time selector for the 15-minute MarketOpen candle (default 09:30–09:45). Line Color: Color for high/low lines (default yellow). Line Width: Thickness of the lines (default 1). Midline Settings Midline Opacity (%): Transparency of the midline (0–100). Default is 50%, making it less prominent than the main lines. Midline Width: Thickness of the midline (default 1). Midline Style: Choose solid, dashed, or dotted (default dashed). 3️⃣ How It Works The indicator detects PreMarket and MarketOpen 15-minute candles for the current day (Monday–Friday). High, low, and midline values of the session candle are stored. Horizontal lines are drawn from the start of the session candle and extend to 16:00 ET. On the next trading day, the same process repeats, so each day has distinct lines. Lines automatically disappear at 16:00 ET to avoid overlap. 4️⃣ Notes & Tips The indicator uses request.security to fetch the 15-minute session candle, ensuring correct line placement even on lower or higher timeframes. It is designed for U.S. market hours, but time inputs can be adjusted manually for other sessions. The midline opacity is customizable, so you can make it subtle or prominent depending on your chart style. Maximum number of lines is set to 500; on very active charts, older lines are automatically removed. 5️⃣ Recommended Usage Apply TJ-US-ORB on any timeframe, preferably 1m–2h, to see accurate session lines. Combine with other indicators (e.g., volume, moving averages) to confirm potential breakout or retracement zones. Use line colors to quickly distinguish PreMarket vs MarketOpen levels. The midline is ideal for observing session mean price, useful for intraday bias. 6️⃣ Example Chart Setup Session Time (ET) Line Color Line Width PreMarket 08:00–08:15 Blue 1 MarketOpen 09:30–09:45 Yellow 1 Midline N/A 50% opacity 1 The indicator will plot three horizontal lines per session: high, low, and midline, extending to 16:00 ET.
Pine Script® indicator
by vishemirski
7M Multi-Factor Momentum ScoreboardThe 7M Scoreboard is more than just a collection of indicators; it is a Real-Time Scoring Engine designed for momentum traders and quant-focused analysts. While many scripts simply "mash up" indicators, the 7M Dashboard provides a weighted analytical framework that filters market noise into a single, actionable 7M Score. It evaluates seven distinct dimensions of market health: Price Action, Relative Volume (Time-specific and Daily), Capital Structure (Float), and Multi-timeframe Trend alignment (VWAP, VWMA, MACD). Make sure to enable Extended Trading Hours in the TradingView settings. What makes it original? The core innovation lies in the 7M Scoring & Alerting logic. Instead of a trader manually checking eight different parameters, the script performs a logical "Pass/Fail" assessment on every bar. Dynamic Time-Anchored Change: Unlike standard change percentages, this script allows you to anchor the "Starting Price" to the Pre-market (4:00 AM), Regular Open (9:30 AM), or Post-market (4:00 PM). Relative Volume (RVOL) at Time: It compares the current 5-minute volume not just to recent bars, but to the historical average for that specific time of day, filtering out the standard "lunchtime lull." Capital Structure Integration: It incorporates a "Float" filter, essential for identifying low-float momentum vs. heavy-cap institutional moves. How it works The script calculates a total score out of 9 points based on the following criteria: Momentum: Is price change > X percent from your chosen time anchor? Liquidity: Is the 5-minute volume > X million? Relative Strength: Is Daily RVOL and Time-specific RVOL > X? Trend Alignment: Is price above VWAP and the 20-period VWMA? Momentum Convergence: Is the MACD histogram positive? Volatility Health: Is RSI between 30 and 70 (avoiding extreme over-extension)? Step-by-Step Guide to Use Set your Market Type: Open the settings and choose your Price Change Anchor. Use Pre-Market if you trade the morning "Gap and Go." Use Regular Open if you are a day-trader focused on the 9:30 AM bell. Configure Thresholds: Set your Min % Move (e.g., 1.5%) and Min 5m Vol. Monitor the 7M Score: Look at the bottom row. Score < 5: High-risk, no clear momentum. Score 7+: High-probability "7M Pass" setup. Alerts (Great with TV's Watchlist Alerts) Right-click the chart and "Add Alert." Select the 7M Dashboard and choose the "🚀 7M PASS" condition to be notified the moment a ticker hits your momentum criteria. Recommended Settings for Different Assets Small-Cap Momentum Pre-Market - 4.0% (Change) - 500k (5m Vol) - 50M (Float) Mega-Cap / Tech Regular - 1.0% (Change) - 1.5M (5m Vol) - 30,000M (Float) Crypto Intraday Regular - 2.5% (Change) - 1M (5m Vol) - 10,000M (Foat) Technical Details Pine Script Version: v6 Visuals: Features a high-contrast UI with adaptive text sizing for the final 7M Score. Alerting: Includes an optimized alert() function for real-time momentum detection. Disclaimer The "7M Multi-Factor Momentum Scoreboard" is a technical analysis tool provided for educational and informational purposes only. Nothing contained in this script, its outputs, or the 7M Score constitutes financial, investment, or trading advice. Trading stocks, futures, and cryptocurrencies involves significant risk of loss and is not suitable for every investor. No Guarantees: Past performance as displayed by historical indicators is not indicative of future results. Model Limitations: The 7M Score is based on mathematical calculations of price and volume; it does not account for fundamental news, earnings surprises, or broader macroeconomic shifts. Personal Responsibility: You are solely responsible for your own trading decisions. Always perform your own due diligence and consult with a licensed financial advisor before putting capital at risk.
Pine Script® indicator
by meistermarco
6-9 session & levels6-9 Session & Levels - Customizable Range Analysis Indicator Description: This indicator provides comprehensive session-based range analysis designed for intraday traders. It calculates and displays key levels based on a customizable session period (default 6:00-9:00 AM ET). Core Features: Session Tracking Monitors user-defined session times with timezone support Displays session open, high, and low levels Highlights session range with optional box visualization Shows previous day RTH (Regular Trading Hours: 9:30 AM - 4:00 PM) levels Range Levels 25%, 50%, and 75% range levels within the session Range deviations at 0.5x, 1.0x, and 2.0x multiples Fibonacci extension levels (customizable, default 1.33x and 1.66x) Optional fill zones between Fibonacci levels Time Zone Highlighting Marks the 9:40-9:50 AM period as a potential reversal zone Vertical lines with shading to identify key time windows Statistical Analysis Calculates mean and median extension levels based on historical sessions Displays statistics table showing current range, average range, range difference, and z-score Customizable sample size (1-100 sessions) for statistical calculations Option to anchor extensions from either session open or high/low points Input Settings Explained: Session Settings Levels Session Time: Define your session window in HHMM-HHMM format (default: 0600-0900) Time Zone: Choose from UTC, America/New_York, America/Chicago, America/Los_Angeles, Europe/London, or Asia/Tokyo Anchor Settings Show Session Anchor: Toggle the session anchor line (marks session open price at 6:00 AM) Anchor Style/Color/Width: Customize appearance (Solid/Dashed/Dotted, color, 1-4 width) Show Anchor Label: Display price label for the anchor Session Open Line: Similar options for the session open reference line Range Box Settings Show Range Box: Display a shaded rectangle highlighting the session high-to-low range Range Box Color: Set the box background color and transparency Range Levels (25%/50%/75%) Show Range Levels: Toggle all three intermediate levels on/off Individual Level Styling: Each level (25%, 50%, 75%) has its own color, style, and width settings Show Range Level Labels: Display price labels for each level Range Deviations Show Range Deviations: Toggle deviation levels on/off 0.5x/1.0x/2.0x Settings: Each deviation multiplier can be customized with its own color, line style (Solid/Dashed/Dotted), and width Show Range Deviation Labels: Display labels showing the deviation price levels Previous Day RTH Levels Show Previous RTH Levels: Display yesterday's regular trading hours high and low RTH High/Low Styling: Separate color, style, and width settings for each level Show Previous RTH Labels: Toggle price labels for RTH levels Time Zones Show 9:40-9:50 AM Zone: Highlight this specific time period with vertical lines and shading Zone Color: Set the background fill color for the time zone Zone Label Color/Text: Customize the label appearance and text Fibonacci Extension Settings Show Fibonacci Extensions: Toggle Fib levels on/off Fib Extension Color/Style/Width: Customize line appearance Show Fib Extension Labels: Display price labels Fib Ext Level 1/2: Set custom multipliers (default 1.33 and 1.66, range 0-5 in 0.1 increments) Show Fibonacci Fills: Display shaded zones between Fib levels Fib Fill Color: Customize the fill color and transparency Session High/Low Settings Show Session High/Low Lines: Display the actual session extremes Style/Color/Width: Customize line appearance Show Labels: Toggle price labels for high/low levels Extension Stats Settings Show Statistical Levels on Chart: Display mean and median extension levels based on historical data Extension Anchor Point: Choose whether to anchor from "Open" or "High/Low" of the session Number of Sessions for Statistics: Set sample size (1-100, default 60) for calculating averages Mean/Median High Extension: Separate styling for each statistical level (color, style, width) Mean/Median Low Extension: Separate styling for downside statistical levels Tables Show Statistics Table: Display a summary table with current range, average range, difference, z-score, and sample size Table Position: Choose from 9 positions (Bottom/Middle/Top + Center/Left/Right) Table Text Size: Select from Auto, Tiny, Small, Normal, Large, or Huge Display Settings Projection Offset: Number of bars to extend lines forward (default 24) Label Size: Choose from Tiny, Small, Normal, or Large Price Decimal Precision: Set decimal places for price labels (0-6) How It Works: The indicator tracks the specified session period and calculates the session's open, high, low, and range. At the end of the session (9:00 AM by default), it projects all configured levels forward for the trading day. The statistical features analyze the last N sessions (you choose the number) to calculate typical extension behavior from either the session open or the session high/low points. The z-score calculation helps identify whether the current session's range is normal, expanded, or contracted compared to recent history, allowing traders to adjust expectations for the rest of the day. Use Case: This indicator helps traders identify key support and resistance levels based on early session price action, understand current range context relative to historical averages, and spot potential reversal zones during specific time periods. Note: This indicator is for informational purposes only and does not constitute investment advice. Always perform your own analysis before making trading decisions.
Pine Script® indicator
by lucymatos
Tristan's Box: Pre-Market Range Breakout + RetestMarket Context: This is designed for U.S. stocks, focusing on pre-market price action (4:00–9:30 AM ET) to identify key support/resistance levels before the regular session opens. Built for 1 min and 5 min timelines, and is intended for day trading / scalping. Core Idea: Pre-market range (high/low) often acts as a magnet for price during regular hours. The first breakout outside this range signals potential strong momentum in that direction. Retest of the breakout level confirms whether the breakout is valid, avoiding false moves. Step-by-Step Logic: Pre-Market Range Identification: Track high and low from 4:00–9:30 AM ET. Draw a box spanning this range for visual reference and calculation. Breakout Detection: When the first candle closes above the pre-market high → long breakout. When the first candle closes below the pre-market low → short breakout. The first breakout candle is highlighted with a “YOLO” label for visual confirmation. Retest Confirmation: Identify the first candle whose wick touches the pre-market box (high touches top for short, low touches bottom for long). Wait for the next candle: if it closes outside the box, it confirms the breakout. Entry Execution: Long entry: on the confirming candle after a wick-touch above the pre-market high. Short entry: on the confirming candle after a wick-touch below the pre-market low. Only the first valid entry per direction per day is taken. Visuals & Alerts: Box represents pre-market high/low. Top/bottom box border lines show the pre-market high / low levels cleanly. BUY/SELL markers are pinned to the confirming candle. Added a "YOLO" marker on breakout candle. Alert conditions trigger when a breakout is confirmed by the retest. Strategy Type: Momentum breakout strategy with confirmation retest. Combines pre-market structure and risk-managed entries. Designed to filter false breakouts by requiring confirmation on the candle after the wick-touch. In short, it’s a pre-market breakout momentum strategy: it uses the pre-market high/low as reference, waits for a breakout, and then enters only after a confirmation retest, reducing the chance of entering on a false spike. Always use good risk management.
Pine Script® strategy
by OhRayOhRay
2
Premarket High/Low (Horizontal Rays)=== Script Description === This TradingView script automatically detects and displays the high and low prices during the premarket session (04:00–09:30 Eastern Time) for the current trading day. It draws horizontal rays that extend across the chart and labels them as "PM High" and "PM Low". These markers are refreshed daily and only apply to today's session. The script also provides full customization for: - Line color, width, and style (solid, dotted, dashed) - Label text color, background color, size, and style (left, right, up, down) Time note: This script assumes data aligned with U.S. market hours.
Pine Script® indicator
by Husky1111
4
Intraday Fibs RetracementFibonacci (Fibs) levels are often used by traders as a way to find support and resistance, based on the Fibonacci sequence. These levels are widely used in technical analysis to identify potential reversal points in the price of an asset. Fibs retracement draws lines at these Fibs level between a significant high and low point on a price chart. What it shows: This indicator will automatically draw Fibs Retracement Levels on your chart without any manual work. It is designed to be used for day trading, especially in scenarios where a ticker gaps up/down large compared to the prior day close. (i.e. scenario where the difference of day's open and prior day close is large) The drawing will happen on each trading day the moment trading hours open, and will NOT draw during pre-market and post-market. User can see the line of each Fibs level, labelled with the Fib percentage and price value for the corresponding levels. User will specify a start and end point of Fibs and based on the choice the indicator will automatically compute the other user defined Fibs levels and display on the chart. How to use it: The Fib levels drawn can be a potential support and resistance zone. Therefore in scenario where you already have a position and are approaching one of these levels it could be a point to close out some or all the position as you are approaching a resistance. On the other hand when price do approach these levels you could enter a position for a reversal trade. These are few ways to use the indicator but there are other ways that can be used, which can be found out by researching "Fibonacci (Fibs) Retracement". In the example on the chart you can see a price bounce from the 0.7886 Fibs level on this particular day, where the price gapped up and was coming down after market hours opened. Key settings: 1. Fibs Retracement Start and end Point: User selects where the Fibs levels should be drawn. Available Options are: Start Points: Market Open Market Open High (Dependent on the time frame you are on) Pre-market High Day's High End Points: Previous Day Close Previous Day Low Previous Day High Pre-market Low (Current Day) Day's Low 2. Custom Fib Levels: User can manually enter the Fib levels they want to see. (Max 9) Default values are: 0,0.236,0.382,0.5,0.618,0.786,1,1.618,2.618. 3. Display settings: User can specify the line colour, thickness and style. 4. Label Setting: User can choose to turn on/off the labels for the each Fibs Level. Label will show the fib percentage and the corresponding price. User can also choose the location of the labels, defined by an offset from the current candle. ---------------------------------------------------------------------- If anything is not clear please let me know!
Pine Script® indicator
by Mereep01
Intraday LevelsWhat it shows: This indicator is useful for day trading, where it will track and display you important price levels which includes: Premarket Low (PML) Premarket High (PMH) Previous Day Low (PDL) Previous Day High (PDH) Previous Day Close (PDC) After Hours Low (AHL) After Hours High (AHH) Day Low (DL) Day High (DH) The price level lines and labels will automatically adjust itself as the price moves, eliminating the need of manually having to adjusting these levels. How to use it: At these levels it can act as important support resistance points during the day and can often serve as a important pivot point for any ticker. You can expect price rejection or bounce when the price approaches these levels. Key settings: For each of the levels, user can adjust in the settings menu: Line Colour Line Thickness Line Style Label Text Price Labelling on Label Label Location (Offset from current bar) Ability to turn on/off the price level and label Display levels for either all days or on the day
Pine Script® indicator
by Mereep01
14
Pre-Market High/Low (Static Lines + Labels) Pre-Market Range ✅ Draws the Pre-Market High & Low from 4:00 AM to 9:30 AM ET using accurate 1-minute intraday data. Static Lines 📏 Plots dashed horizontal lines that remain visible all day across all timeframes — including 1m, 5m, 15m, 1h, 4h, and Daily. Price Labels 🔖 Includes real-time price labels so you can easily reference exact pre-market levels on the chart. Session Lock 🕒 Lines are locked in after 9:30 AM and remain visible even if you switch timeframes or turn off extended hours. Trading Utility 🎯 Ideal for identifying key breakout levels, intraday support/resistance zones, and setting risk parameters.
Pine Script® indicator
by stella_mer
1
Intraday Volume### Intraday Volume Indicator Explanation --- this was Mostly created by OpenAI ChatGPT --- it's pretty good! --- My Commentary: One of the problems I find is with Volume is - it is skewed by the overwhelming volume around the Open and Close. So, as an experiment, I asked ChatGPT to create an indicator to plot the volume everywhere BUT the open. I added in the CandleColor() function and set the times. I also changed the Intraday Volume calculation from Cumulative to live. still Chat GPT - did about 90% of the heavy lift! And, wrote the summary ! ---- The "Intraday Volume" indicator is a custom script designed for use on the TradingView platform. It provides a visual representation of the total accumulated trading volume during the intraday trading session, specifically between the market open and close times. Below is a detailed explanation of its functionality: #### **Key Features:** 1. **Session Times:** - The indicator defines the intraday session as the period between 9:30 AM EST (market open) and 4:00 PM EST (market close). - It uses the `timestamp` function to set these times dynamically for each trading day. 2. **Intraday Volume Calculation:** - During the defined intraday session, the indicator accumulates the trading volume from each bar (candlestick). - Outside the intraday session, the volume is reset to `na` (not available) to ensure only intraday data is plotted. 3. **Plotting the Volume:** - The accumulated intraday volume is plotted as a blue column chart in a separate pane below the price chart. - This provides a clear visualization of how the trading volume evolves throughout the trading session. 4. **Horizontal Reference Line:** - A horizontal line is added at zero as a visual reference, making it easier to interpret the volume data. #### **Use Cases:** - **Volume Analysis:** - Traders can use the indicator to identify periods of high or low trading activity during the intraday session. - Peaks in the volume chart may correspond to key market events, such as news releases or significant price movements. - **Trend Confirmation:** - Comparing intraday volume with price action can help traders confirm the strength of a trend or the likelihood of a reversal. - **Custom Time Frames:** - Although this script is tailored for regular U.S. market hours, it can be adapted for other markets or time zones by modifying the session times. #### **Customization:** - **Colors and Styles:** - The plot color (blue) and style (columns) can be customized to suit user preferences. - **Session Times:** - Users can change the session start and end times to match their trading needs or regional market hours. This indicator is especially useful for intraday traders seeking insights into trading volume dynamics within the trading day. By visualizing the intraday volume, traders can gain a deeper understanding of market behavior and make informed decisions.
Pine Script® indicator
by JohnDonahue
Premarket Std Dev BandsOverview The Premarket Std Dev Bands indicator is a powerful Pine Script tool designed to help traders gain deeper insights into the premarket session's price movements. This indicator calculates and displays the standard deviation bands for premarket trading, providing valuable information on price volatility and potential support and resistance levels during the premarket hours. Key Features Premarket Focus: Specifically designed to analyze price movements during the premarket session, offering unique insights not available with traditional indicators. Customizable Length: Users can adjust the averaging period for calculating the standard deviation, allowing for tailored analysis based on their trading strategy. Standard Deviation Bands: Displays both 1 and 2 standard deviation bands, helping traders identify significant price movements and potential reversal points. Real-Time Updates: Continuously updates the premarket open and close prices, ensuring the bands are accurate and reflective of current market conditions. How It Works Premarket Session Identification: The script identifies when the current bar is within the premarket session. Track Premarket Prices: It tracks the open and close prices during the premarket session. Calculate Premarket Moves: Once the premarket session ends, it calculates the price movement and stores it in an array. Compute Averages and Standard Deviation: The script calculates the simple moving average (SMA) and standard deviation of the premarket moves over a specified period. Plot Standard Deviation Bands: Based on the calculated standard deviation, it plots the 1 and 2 standard deviation bands around the premarket open price. Usage To utilize the Premarket Std Dev Bands indicator: Add the script to your TradingView chart. Adjust the Length input to set the averaging period for calculating the standard deviation. Observe the plotted standard deviation bands during the premarket session to identify potential trading opportunities. Benefits Enhanced Volatility Analysis: Understand price volatility during the premarket session, which can be crucial for making informed trading decisions. Support and Resistance Levels: Use the standard deviation bands to identify key support and resistance levels, aiding in better entry and exit points. Customizable and Flexible: Tailor the averaging period to match your trading style and strategy, making this indicator versatile for various market conditions.
Pine Script® indicator
by PremiumAlgos
2
Premarket Levels [UkutaLabs]█ OVERVIEW The Premarket Levels indicator measures the premarket high and low of any given market. The Premarket Levels creates potential strong resistance and support levels based on the premarket high and low which traders can use to gauge the market outlook ahead of the regular open. The aim of this script is to simplify the trading experience of users by automatically identifying and displaying price levels that they should be aware of. █ USAGE At the beginning of the New York Session of each trading day at 1:30pm UTC time, this script will automatically identify the High and Low prices since the market opened at 10:00pm the night before. This happens automatically and in real time, ensuring that traders have access to this information as soon as the market is open. These lines will extend until the end of the trading day, and also contain labels that display the price of each line. These labels can be disabled in the indicator's settings. These levels indicate the total range of the market for that day until the open of the New York Session, and can be treated as levels of Support and Resistance after the market has opened. █ SETTINGS Configuration • Show Labels: Determines whether labels are drawn within the range. • Display Mode: Determines the number of days the script should load. Range Settings • High Color: Determines the color of the high lines and labels. • Low Color: Determines the color of the low lines and labels.
Pine Script® indicator
by UkutaLabs
30
Market Pivot Levels [Past & Live]Market Levels provide a robust view of daily pivot points of markets such as high/low/close with both past and live values shown at the same time using the recently updated system of polylines of pinescript. The main need for this script arose from not being able to use plots for daily points because plots are inherently once drawn can't be erased and because we can't plot stuff for previous bars after values are determined we can't use them reliably. And while we can use traditional lines, because we would have extremely high amount of lines and we would have to keep removing the previous ones it wouldn't be that effective way for us. So we try to do it with the new method of polylines . Features of this script: - Daily High/Low Points - Yesterday High/Low/Close Points - Pre-Market High-Low points. Now let's preview some of the important points of code and see how we achieve this: With the code below we make sure no matter which chart we are using we are getting the extended hours version of sessions so our calculations are made safely for viewing pre-market conditions. // Let's get ticker extended no matter what the current chart is tc = ticker.new(syminfo.prefix, syminfo.ticker, session.extended) Coding our own function to calculate high's and low's because inbuilt pinescript function cannot take series and we send this function to retrieve our high's and lows. // On the fly function to calculate daily highlows instead of tv inbuilt because tv's length cannot take series f_highlow(int last) => bardiff = last float _low = low, float _high = high for i = bardiff to 0 by 1 if high > _high _high := high if low < _low _low := low With doing calculations at the bars of day ending points we can retrieve the correct points and values and push them for our polylines array so it can be used in best way possible. // Daily change points changeD = timeframe.change("D") // When new day starts fill polyline arrays with previous day values for polylines to draw on chart // We also update prevtime values with current ones after we pushed to the arrays if changeD f_arrFill(cpArrHigh, cpArrLow, prevArrh, prevArrl, prevArrc, prevMarh, prevMarl) valHolder.unshift(valueHold.new(_high, _low, _high, _close, _low, time, pr_h, pr_l)) The rest of the code is annotated and commented. You can let me know in comments if you have any questions. Happy trading.
Pine Script® indicator
by serkany88
Scoopy StacksWaffle Around Multiple (Open, High, Low, Close) Stacks On Pre/Post Market & (Daily, Weekly, Monthly, Yearly) Sessions With Meticulous Columns, Rows, Tooltips, Colors, Custom Ideas, and Alerts. Sessions Use Two Step Incremental Values Default Value: (1) Shows Two Previous (O, H, L, C); Increasing Value Swaps Sessions With Next Two Stacks. ⬛️ KEY WORDS: 🟢 Crossover | 🔴 Crossunder 📗 High | 📕 Low 📔 Open | 📓 Close 🥇 First Idea | 🥈 Second Idea 🥉 Third Idea | 🎖️ Fourth Idea 🟥 ALERTS: Default Option: (Per Bar) Alerts Once Conditions Are Met (Bar Close) Alerts When Bar Closes Default Option: (Reg) Alerts During Regular Market Trading Hours, (0930-1600) (Ext) Alerts During Extended Market Hours, (1600-0930) (24/7) Alerts All Day Optional Preferences: Regular Alerts - Stocks Extended Alerts - Futures 24/7 Alerts - Crypto 🟧 STACKS: Default Value: (1) Incremental Stack Value, Increasing Value Swaps Sessions With the Next Two Stacks (✓) Swap Stacks? Pre/Post Market High/Lows, 1-2 Day High/Lows, 1-2 Week High/Lows, 1-2 Month High/Lows, 1-2 Year High/Lows ( ) Swap Stacks? Pre/Post Market Open/Close, 1-2 Day Open/Close, 1-2 Week Open/Close, 1-2 Month Open/Close, 1-2 Year Open/Close 🟨 EXAMPLES: Default Stack: 🟢 | 📗 Pre Market High (PRE) | 4600.00 🔴 | 📕 Post Market Low (POST) | 420.00 Optional: (Open) 🟢 | 📔 Post Market Open (POST) | 4400.00 Optional: (Close) 🔴 | 📓 Pre Market Close (PRE) | 430.00 Default Stack Value: (1) 🔴 | 📗 1 Day High (1DH) | 460.00 Next Stack Value: (3) 🟢 | 📕 4 Day Low (4DL) | 420.00 Optional: (Open) 🔴 | 📔 2 Day Open (2DO) | 440.00 Optional: (Close) 🟢 | 📓 3 Day Close (3DC) | 430.00 Default Stack Value: (5) 🟢 | 📗 5 Week High (5WH) | 460.00 Next Stack Value: (7) 🔴 | 📕 8 Week Low (8WL) | 420.00 Optional: (Open) 🔴 | 📔 7 Week Open (7WO) | 4400.00 Optional: (Close) 🟢 | 📓 6 Week Close (6WC) | 430.00 Default Stack Value: (9) 🔴 | 📗 9 Month High (9MH) | 460.00 Next Stack Value: (11) 🟢 | 📕 12 Month Low (12ML) | 420.00 Optional: (Open) 🟢 | 📔 11 Month Open (11MO) | 4400.00 Optional: (Close) 🔴 | 📓 10 Month Close (10MC) | 430.00 Default Stack Value: (13) 🟢 | 📗 13 Year High (13YH) | 460.00 Next Stack Value: (15) 🟢 | 📕 16 Year Low (16YL) | 420.00 Optional: (Open) 🔴 | 📔 15 Year Open (15YO) | 4400.00 Optional: (Close) 🔴 | 📓 14 Year Close (14YC) | 430.00 🟩 TABLES: Default Value: (1) Moves Table Up, Down, Left, or Right Based on Second Default Value First Default Value: (Top Right) Sets Table Placement, Middle Center Allows Table To Move In All Directions Second Default Value: (Default) Fixed Table Position, Switching Values Moves Direction of the Table 🟦 IDEAS: (✓) Show Ideas? Shows Four Ideas With Custom Texts and Values; Ideas Are Based Around Post-It Note Reminders with Alerts Suggestions For Text Ideas: Take Profit, Stop Loss, Trim, Hold, Long, Short, Bounce Spot, Retest, Chop, Support, Resistance, Buy, Sell 🟪 EXAMPLES: Default Value: (5) Shows the Custom Table Value For Sorted Table Positions and Alerts Default Text: (🥇) Shown On First Table Cell and Message Appearing On Alerts Alert Shows: 🟢 | 🥇 | 5.00 Default Value: (10) Shows the Custom Table Value For Sorted Table Positions and Alerts Default Text: (🥈) Shown On Second Table Cell and Message Appearing On Alerts Alert Shows: 🔴 | 🥈 | 10.00 Default Value: (50) Shows the Custom Table Value For Sorted Table Positions and Alerts Default Text: (🥉) Shown On Third Table Cell and Message Appearing On Alerts Alert Shows: 🟢 | 🥉 | 50.00 Default Value: (100) Shows the Custom Table Value For Sorted Table Positions and Alerts Default Text: (🎖️) Shown On Fourth Table Cell and Message Appearing On Alerts Alert Shows: 🔴 | 🎖️ | 100.00 ⬛️ REFERENCES: Pre-market Highs & Lows on regular trading hours (RTH) chart By Twingall Previous Day Week Highs & Lows By Sbtnc Screener for 40+ instruments By QuantNomad Daily Weekly Monthly Yearly Opens By Meliksah55
Pine Script® indicator
by Scvvby
Ribbit RangesBounce Around Multiple (Open, High, Low, Close) Ranges On Pre/Post Market & (Daily, Weekly, Monthly, Yearly) Sessions With Meticulous Lines, Labels, Tooltips, Colors, Custom Ideas, and Alerts. Sessions Use Two Step Incremental Values Default Value: (1) Shows Two Previous (O, H, L, C); Increasing Value Swaps Sessions With Next Two Ranges. ⬛️ KEY WORDS: 🟢 Crossover | 🔴 Crossunder 📗 High | 📕 Low 📔 Open | 📓 Close 🥇 First Idea | 🥈 Second Idea 🥉 Third Idea | 🎖️ Fourth Idea 🟥 ALERTS: Default Option: (Per Bar) Alerts Once Conditions Are Met (Bar Close) Alerts When Bar Closes Default Option: (Reg) Alerts During Regular Market Trading Hours, (0930-1600) (Ext) Alerts During Extended Market Hours, (1600-0930) (24/7) Alerts All Day Optional Preferences: Regular Alerts - Stocks Extended Alerts - Futures 24/7 Alerts - Crypto 🟧 RANGES: Default Value: (1) Incremental Range Value, Increasing Value Swaps Sessions With the Next Two Ranges (✓) Swap Ranges? Pre/Post Market High/Lows, 1-2 Day High/Lows, 1-2 Week High/Lows, 1-2 Month High/Lows, 1-2 Year High/Lows ( ) Swap Ranges? Pre/Post Market Open/Close, 1-2 Day Open/Close, 1-2 Week Open/Close, 1-2 Month Open/Close, 1-2 Year Open/Close 🟨 EXAMPLES: Default Range: 🟢 | 📗 Pre Market High (PRE) | 4600.00 🔴 | 📕 Post Market Low (POST) | 420.00 Optional: (Open) 🟢 | 📔 Post Market Open (POST) | 4400.00 Optional: (Close) 🔴 | 📓 Pre Market Close (PRE) | 430.00 Default Range Value: (1) 🔴 | 📗 1 Day High (1DH) | 460.00 Next Range Value: (3) 🟢 | 📕 4 Day Low (4DL) | 420.00 Optional: (Open) 🔴 | 📔 2 Day Open (2DO) | 440.00 Optional: (Close) 🟢 | 📓 3 Day Close (3DC) | 430.00 Default Range Value: (5) 🟢 | 📗 5 Week High (5WH) | 460.00 Next Range Value: (7) 🔴 | 📕 8 Week Low (8WL) | 420.00 Optional: (Open) 🔴 | 📔 7 Week Open (7WO) | 4400.00 Optional: (Close) 🟢 | 📓 6 Week Close (6WC) | 430.00 Default Range Value: (9) 🔴 | 📗 9 Month High (9MH) | 460.00 Next Range Value: (11) 🟢 | 📕 12 Month Low (12ML) | 420.00 Optional: (Open) 🟢 | 📔 11 Month Open (11MO) | 4400.00 Optional: (Close) 🔴 | 📓 10 Month Close (10MC) | 430.00 Default Range Value: (13) 🟢 | 📗 13 Year High (13YH) | 460.00 Next Range Value: (15) 🟢 | 📕 16 Year Low (16YL) | 420.00 Optional: (Open) 🔴 | 📔 15 Year Open (15YO) | 4400.00 Optional: (Close) 🔴 | 📓 14 Year Close (14YC) | 430.00 🟩 COLORS: (✓) Swap Colors? Text Color Is Shown Using Background Color ( ) Swap Colors? Background Color Is Shown Using Text Color 🟦 IDEAS: (✓) Show Ideas? Plots Four Ideas With Custom Lines and Labels; Ideas Are Based Around Post-It Note Reminders with Alerts Suggestions For Text Ideas: Take Profit, Stop Loss, Trim, Hold, Long, Short, Bounce Spot, Retest, Chop, Support, Resistance, Buy, Sell 🟪 EXAMPLES: Default Value: (5) Shows the Custom Value For Lines, Labels, and Alerts Default Text: (🥇) Shown On First Label and Message Appearing On Alerts Alert Shows: 🟢 | 🥇 | 5.00 Default Value: (10) Shows the Custom Value For Lines, Labels, and Alerts Default Text: (🥈) Shown On Second Label and Message Appearing On Alerts Alert Shows: 🔴 | 🥈 | 10.00 Default Value: (50) Shows the Custom Value For Lines, Labels, and Alerts Default Text: (🥉) Shown On Third Label and Message Appearing On Alerts Alert Shows: 🟢 | 🥉 | 50.00 Default Value: (100) Shows the Custom Value For Lines, Labels, and Alerts Default Text: (🎖️) Shown On Fourth Label and Message Appearing On Alerts Alert Shows: 🔴 | 🎖️ | 100.00 ⬛️ REFERENCES: Pre-market Highs & Lows on regular trading hours (RTH) chart By Twingall Previous Day Week Highs & Lows By Sbtnc Screener for 40+ instruments By QuantNomad Daily Weekly Monthly Yearly Opens By Meliksah55
Pine Script® indicator
by Scvvby
2
Extended Hour CandleThe Extended Hour Candle shows extended hour candle formations on the Daily chart. This indicator can be useful for those who want to analyse price movements during extended trading sessions without switching to intraday charts with "Extended trading hours" enabled. How to Use: Add the Extended Hour Candle indicator to a TradingView chart. Adjust the color settings according to personal preferences, using the options to set the desired colors for up and down candles. See the Candle during extended trading hours on the Daily chart
Pine Script® indicator
by fyntrade
3