Get started

Moving Averages

Turtle Strategy - Triple EMA Trend with ADX and ATRDescription The Triple EMA Trend strategy is a directional momentum system built on the alignment of three exponential moving averages and a strong ADX confirmation filter. It is designed to capture established trends while maintaining disciplined risk management through ATR-based stops and targets. Core Logic The system activates only under high-trend conditions, defined by the Average Directional Index (ADX) exceeding a configurable threshold (default: 43). A bullish setup occurs when the short-term EMA is above the mid-term EMA, which in turn is above the long-term EMA, and price trades above the fastest EMA. A bearish setup is the mirror condition. Execution Rules Entry:  • Long when ADX confirms trend strength and EMA alignment is bullish.  • Short when ADX confirms trend strength and EMA alignment is bearish. Exit:  • Stop Loss: 1.8 × ATR below (for longs) or above (for shorts) the entry price.  • Take Profit: 3.3 × ATR in the direction of the trade. Both parameters are configurable. Additional Features  • Start/end date inputs for controlled backtesting.  • Selective activation of long or short trades.  • Built-in commission and position sizing (percent of equity).  • Full visual representation of EMAs, ADX, stop-loss, and target levels. This strategy emphasizes clean trend participation, strict entry qualification, and consistent reward-to-risk structure. Ideal for swing or medium-term testing across trending assets.
Pine Script® strategy
by cyatophilum
TT ToniTrading Adjustable Price Fee Band [%]Simple but perfectly functional indicator with Trading fee bands. Crypto Trading is with fees and very small trades often don't make sense due to the fees we need to pay. With this band you can visualize your fees before entering a trade and take smarter decisions for tight daytrading and scalping. You type in the fee for just one trade, the Taker Fee for a Market Order. The bands show the fees in % times 2, so what you will pay for opening and closing the trade in reality. The band therefore shows the real break-even point, with included payed fees. It additionally helps taking trading decisions or not with very small trades (Scalping). You can smooth the bands if you want and you can addtionally show the true datapoints if you prefer smoothend bands. I recommend no bigger smoothing than 2, if you don't want to show the datapoints. Additionally you can fill the band, and of course adjust transperency, colour and all the general TradingView stuff. Fee Overview in the current market for the indicator input field: BingX with 10% fee reduction code = 0,045 % BingX: Normal = 0,050 % Bitget, ByBit, BitUnix, Blofin, Phemex: Normal = 0,060 % Bitget, ByBit, BitUnix, Blofin, Phemex: with 20% fee reduction code = 0,048 % Have fun Trading, Happy Profits! Greetings ToniTrading
Pine Script® indicator
by ToniTradingCrypto
Proteus EMA SystemInstitutional-Grade EMA System Overview and Originality The Institutional-Grade EMA System is an advanced, multi-layered Exponential Moving Average (EMA) overlay indicator designed to provide institutional-level trend analysis, market regime identification, and trade signal generation. Unlike standard multi-EMA scripts that simply plot averages and basic crossovers, this indicator introduces a proprietary integration of features tailored for professional traders: customizable presets that dynamically adjust EMA lengths for specific trading styles (e.g., scalping vs. position trading), multiple selectable trend detection algorithms (including a unique multi-bar slope analysis with percentage-based strength thresholding), EMA alignment and confluence detection for spotting high-conviction trends and reversal zones, volume-based signal filtering, and a comprehensive statistics dashboard for real-time market insights. What makes this script original and worthy of closed-source protection is the bespoke combination of these elements into a cohesive system. For instance, while basic EMA ribbons or trend coloring exist in other indicators, this script's trend detection goes beyond simple comparisons by incorporating a normalized slope percentage calculation (detailed below) to quantify trend strength on a 0-100% scale, integrated with EMA stacking checks and confluence thresholds. This proprietary logic—refined through extensive backtesting on diverse assets—allows for nuanced market regime classification (e.g., "Strong Uptrend" only when alignment, slope strength, and volume align), which isn't replicated in open-source alternatives. The closed-source format protects the exact orchestration of these algorithms, including custom threshold derivations and dashboard computations, preventing direct replication while allowing users full access to the tool's outputs. If published open-source, the unique mathematical formulations (e.g., slope-to-strength mapping) could be easily copied, diminishing its edge in competitive trading environments. This indicator draws conceptual inspiration from institutional trend-following systems (e.g., those using multiple time-horizon EMAs like in hedge fund models), but enhances them with modern Pine Script capabilities for visual and analytical depth. It's particularly useful for traders seeking to reduce false signals in volatile markets by requiring multi-factor confluence. What It Does Core EMA Plotting and Visualization: Plots up to 7 EMAs (5 primary + 2 optional) with dynamic coloring based on detected trend direction and strength (strong bullish: bright green; weak: faded green; neutral: gray; etc.). Includes EMA ribbons (fills between consecutive EMAs) and clouds (broader fills between non-consecutive EMAs) to visualize trend expansion/contraction. Trend Detection and Strength: Classifies trends as strong/weak bullish/bearish or neutral using user-selectable methods, with optional volume confirmation to filter low-conviction moves. Advanced Analytics: Detects EMA alignment (all EMAs stacked in ascending/descending order for bullish/bearish trends). Identifies EMA confluence zones (tight clustering of EMAs, signaling potential reversals or consolidations). Draws dynamic support/resistance lines from the nearest EMAs relative to price. Signals and Alerts: Generates buy/sell signals on customizable EMA crossovers, only if volume thresholds are met. Includes alerts for crossovers, alignments, confluences, and regime shifts. User Interface Enhancements: Background coloring for quick trend bias (e.g., green for uptrends, yellow for confluences), dynamic line widths (thicker for slower EMAs), trend state labels, and a table-based dashboard displaying metrics like market regime, trend strength percentage, EMA slopes in degrees, price distances to key EMAs, volume status, and alignment state. Customization Presets: Pre-configured EMA lengths for Scalping (short, reactive: e.g., 5/8/13), Day Trading (balanced: 9/21/50), Swing Trading (medium-term: 20/50/100), Position Trading (long-term: 50/100/150), or fully custom. The result is a versatile tool that adapts to any timeframe or asset, helping traders identify high-probability setups by combining trend momentum, volume, and EMA dynamics. How It Works: Underlying Concepts and Calculations Without revealing the full implementation, here's a transparent overview of the key concepts and methodologies to help users understand the indicator's logic: EMA Calculation and Presets: EMAs are computed using standard exponential smoothing (weighting recent prices more heavily). Presets optimize lengths based on trading horizon—shorter for scalping to capture quick reversals, longer for position trading to filter noise. For example, Swing preset uses 20/50/100/150/200 to balance short-term pullbacks with long-term trends, derived from Fibonacci-inspired progressions for natural market rhythm alignment. Trend Detection Methods: Users select from four algorithms for flexibility: Multi-Bar Slope (Default): Calculates the average slope over a lookback period (e.g., 3 bars) as (current EMA value - EMA value ) / lookback. Normalizes to a percentage relative to the EMA value: slope_percent = (slope / EMA) * 100. Thresholds classify trends (e.g., >0.05% = strong bullish; 0.01-0.05% = weak; symmetric for bearish). This method draws from linear regression concepts but simplifies for real-time use, providing robust trend quantification over simple bar-to-bar changes. Previous Bar: Compares current EMA to the prior bar's, with percentage change thresholds (e.g., >0.1% = strong) for quick momentum shifts. EMA vs EMA: Measures the percentage difference between fast and slow EMAs (e.g., >2% = strong bullish), inspired by MACD-like divergence but applied directly to EMAs. Price Position: Gauges price's percentage distance from the EMA (e.g., >1% above = strong bullish), similar to envelope channels but integrated into trend coloring. Trend strength is further scored (0-100%) by averaging absolute slopes of key EMAs, scaled for dashboard display. Volume Confirmation: Uses a simple moving average of volume over a user-defined length (default 20), requiring current volume to exceed it by a multiplier (default 1.2x) for signal validation. This filters out low-volume fakeouts, akin to institutional volume-weighted strategies. EMA Alignment: Checks if all visible EMAs are in strict order (fastest highest in uptrends, lowest in downtrends) by iterating through active EMAs and verifying sequential relationships. Signals "ALIGNED" shapes when true, indicating stacked trends like in ribbon strategies but with programmatic validation. EMA Confluence: Computes the average of active EMAs, then measures the maximum percentage deviation of any EMA from this average. If below a threshold (default 0.5%), marks a "CONFLUENCE ZONE" box, conceptually similar to Bollinger Band squeezes but applied to EMA clusters for reversal anticipation. Market Regime Classification: Combines alignment, trend score (>30% for "strong"), and price position relative to slowest EMA. For example, bullish alignment + high score = "Strong Uptrend"; close clustering = "Consolidation". This heuristic draws from regime-switching models in quantitative finance. Signals and Visuals: Crossovers between user-selected EMAs (e.g., fast #1 over slow #2) plot "BUY/SELL" shapes only if volume-confirmed. Ribbons use color fills (green/red) based on EMA order; background shades reflect regime; S/R lines extend from max/min EMAs below/above price over a lookback (default 50 bars). These calculations ensure the indicator provides actionable, multi-confirmed insights rather than generic plots. How to Use It Setup: Add to your chart and select a preset (e.g., "Swing Trading" for 1H-4H charts). Customize trend method (start with "Multi-Bar Slope" for accuracy), enable volume filter for reliability, and toggle visuals like ribbons or dashboard. Trend Following: In a "Strong Uptrend" (green background, upward slopes >30%, bullish alignment), go long above the fastest EMA. Use S/R lines for stops (below nearest support EMA). Swing Trading Example: On a daily SPX chart with Swing preset: Wait for "Weak Uptrend" transition to "Strong" (trend score >50%, positive slopes, volume spike). Enter long on EMA1 (20) crossing EMA2 (50), confirmed by "BUY" signal. Target next resistance EMA (e.g., 150), exit on bearish crossover or confluence zone (yellow box signaling potential top). Risk: Stop below EMA3 (100); aim for 2:1 reward:risk on multi-day holds. Scalp Trading Example: On a 5-min BTCUSD chart with Scalping preset: Focus on quick "Weak Bullish" shifts (faded green EMAs, slope >0.01%). Buy on EMA1 (5) crossing EMA3 (13) with high volume (>1.5x avg). Scalp 0.2-0.5% gains, exit at slope flattening (dashboard shows <30% strength) or nearest resistance. Avoid confluences (chop); use 1-min for entries, 15-min for bias. General Tips: Combine with price action (e.g., candlestick patterns at confluence zones). Backtest presets on your asset—adjust thresholds for volatility (e.g., tighter confluence for forex). Use alerts for hands-off monitoring; multi-timeframe analysis enhances accuracy (higher TF for regime, lower for signals). For ranging markets ("Neutral" regime), fade extremes near S/R zones. Examples for Swing Trading Swing trading focuses on capturing medium-term moves (days to weeks) in trending markets. Use the "Swing Trading" preset, which sets EMAs to 20, 50, 100, 150, 200, 75, 125—balancing sensitivity and smoothness. Bullish Setup Example: On a daily chart of AAPL, wait for a "Strong Uptrend" regime (green background, bullish alignment label, trend strength >50%). Enter long on a valid bullish crossover (green "BUY" circle) between EMA1 (20) and EMA2 (50), confirmed by high volume. Set stop below nearest support EMA (e.g., EMA3 at 100), target 2-3x risk or next resistance. Hold until bearish crossover or alignment breaks. Bearish Setup Example: On a 4H chart of EURUSD, spot a "Strong Downtrend" (red background, bearish alignment). Short on a bearish crossover (red "SELL") between EMA1 and EMA3, with volume confirmation. Stop above nearest resistance EMA, exit on confluence zone (yellow) signaling potential reversal. Tip: Focus on alignments for trend confirmation—avoid trading against them. Use confluence zones as profit-taking areas in ranging markets. Examples for Scalp Trading Scalping targets quick, short-term trades (minutes to hours) on lower timeframes. Select the "Scalping" preset for shorter EMAs (5, 8, 13, 21, 34, 55, 89) to catch rapid moves. Bullish Setup Example: On a 1-min chart of BTCUSD, look for "Weak Uptrend" (faded green background, positive slopes). Enter long on a fast crossover (e.g., EMA1 over EMA2) with high volume and no confluence (avoid chop). Scalp for 0.5-1% gain, exit on slope flattening or bearish cross. Use tight stops below the fastest EMA. Bearish Setup Example: On a 5-min chart of TSLA, identify "Weak Downtrend" (faded red). Short on a crossover between EMA2 and EMA3, confirmed by volume spike. Target small moves (e.g., 10-20 pips), exit at nearest support EMA or if trend strength drops below 30%. Tip: Prioritize "Multi-Bar Slope" detection for quick trend shifts. Disable background if it's distracting; focus on crossovers and volume for high-frequency entries. Avoid during confluences, as they signal choppy conditions. This detailed approach ensures traders can replicate setups while appreciating the indicator's original value. Feedback welcome—let's refine trading edges together!
Pine Script® indicator
by starseedmaster1
Moving Averages PowerMoving Averages Power — Trend + Normalized Strength Lightweight indicator that plots up to 15 SMAs (5 → 4320) and shows a compact table with each MA’s: Slope % (per-bar) Trend (Bullish/Bearish/Neutral) Normalized “Strength” bars comparable across MA lengths and, optionally, across timeframes via ATR% Not financial advice. For research/education only. What it does Plots 15 SMA lines on the price chart Colors match trend: Bullish (green), Bearish (red), Neutral (gray) Bottom-right table: MA, Slope %, Trend, Strength bars Strength normalization modes: None: raw |slope%| Length: scales by length relative to a reference length ATR%: scales by volatility (ATR as % of price) Length+ATR%: combines both for better cross-timeframe comparability How it works (concepts) Slope % per bar: 100 × (MA − MA ) / MA Normalization: None: S = |slope%| Length: S = |slope%| × (length / normRefLen) ATR%: S = |slope%| / ATR%, where ATR% = 100 × ATR(atrLen) / close Length+ATR%: S = (|slope%| × (length / normRefLen)) / ATR% Bars: floor(S / strengthStep), clamped to Max bars (default 10) Notes: normRefLen (default 240) keeps Length scaling stable across very short and very long MAs In ATR modes, Strength shows blank until there’s enough history for ATR How to use Add the indicator to your chart (Indicators → search this title → Add). Open Settings: Show/hide any of the 15 SMAs Choose Strength normalization mode Tune Strength step, Max bars, Reference length, and ATR Length Read the table: MA: period Slope %: per-bar percent change of the MA Trend: green (bullish), red (bearish), gray (neutral) Strength: more bars = stronger trend under the chosen normalization Inputs (quick reference) Display: 15 toggles: Show SMA 5 … Show SMA 4320 Strength Settings: Strength normalization: None | Length | ATR% | Length+ATR% Strength step (normalized units): sensitivity of bar count Max bars: clamp for the bar count (default 10) Normalization reference length: baseline for Length scaling (default 240) ATR Length (for ATR%): ATR lookback used for ATR% Text: Label font size, Table font size Line + label colors Bullish (slope > 0): green Bearish (slope < 0): red Neutral (otherwise): gray The MA lines, end-of-series labels, and table trend cell use the same colors Recommended presets (examples) Intraday (e.g., BTCUSD, 1h): Strength normalization: Length+ATR% normRefLen: 240 Strength step: 0.02–0.05 Max bars: 10 ATR Length: 14 Daily (e.g., AAPL, 1D): Strength normalization: Length normRefLen: 240–480 Strength step: 0.01–0.03 Max bars: 10 Calibration tips Bars often at max (pegged)? Increase Strength step (e.g., 0.01 → 0.03 → 0.05) Or increase normRefLen (e.g., 240 → 480 → 720) Bars too few? Decrease Strength step (e.g., 0.02 → 0.01 → 0.005) Or decrease normRefLen (e.g., 240 → 120) Cross-timeframe comparability: Prefer Length+ATR%; start with Strength step ≈ 0.02–0.05 and tune Limitations SMA only (no EMA/WMA/etc.) Per-bar slope is inherently timeframe-sensitive; use ATR% or Length+ATR% for better cross-timeframe comparisons ATR modes require atrLen bars; Strength shows blank until ready The longest SMA (4320) needs sufficient chart history Troubleshooting Strength always looks maxed: You might be on Length mode with a very small step; increase Strength step and/or use Length+ATR%; review normRefLen Strength blank cells: In ATR modes, wait for enough history (atrLen) or switch to Length mode Table bounds: The script manages rows internally; if you customize periods, ensure the total rows fit the 4×16 table Compatibility Pine Script v6 Works on most symbols/timeframes with adequate history If you find this useful, consider leaving feedback with your preferred defaults (symbol/timeframe) so I can provide better presets.
Pine Script® indicator
by codyhome
Composite Stochastic Oscillator (CSO) [SharpStrat]Composite Stochastic Oscillator (CSO) The Composite Stochastic Oscillator (CSO) is a refined momentum tool designed to improve on the limitations of the traditional stochastic indicator. Standard stochastics are often too sensitive, producing choppy signals and frequent false turns. CSO tackles this problem by combining multiple stochastic calculations, each with different lengths and smoothing settings, into a single, balanced output. The goal of combining these stochastic variants is to create a more stable and reliable reading of market momentum. Each version of the stochastic captures different aspects of price behavior like shorter ones react faster, while longer ones filter noise. CSO brings them together mathematically to form a composite oscillator that reacts smoothly and consistently across varying market conditions. This makes it a useful improvement over the standard stochastic, providing traders with a more dependable signal while retaining the familiar interpretation framework. How It Works Calculates five independent stochastic oscillators with customizable K, D, and slowing parameters. Each stochastic contributes to the final composite value according to its assigned weight, allowing the user to emphasize faster or slower reactions. The resulting composite K is then smoothed into a D line using a chosen moving average method (SMA, EMA, WMA, or RMA). The oscillator is plotted along with optional overbought/oversold levels and a color fill to enhance visual interpretation. A compact on-chart table displays the current K and D readings for quick reference. Comparison with normal Stochastic Compared to a standard stochastic, the CSO generally produces smoother lines and fewer false flips. As evident in the comparison chart, this improves upon the normal stochastic by reducing noise and making signals more reliable, although results depend on parameter settings too. How To Use It Use the CSO exactly like a normal stochastic: look for crossovers, overbought/oversold zones, and divergences. In practice, CSO should provides smoother and more consistent signals than the regular stochastic, especially in sideways or volatile markets. When plotted beside a standard stochastic, you’ll notice CSO avoids many of the false reversals that clutter traditional readings. Customization Options Choice of smoothing method (SMA, EMA, WMA, RMA). Full control over each stochastic component’s parameters and weights. Adjustable overbought/oversold levels and display preferences. Option to enable or disable the on-chart table and zone fills. Note This indicator is shared purely for educational and research purposes. It is not financial advice and should not be treated as a ready-made trading system. I encourage you to experiment with different parameter values (periods, weights, smoothing) to explore how the behavior changes and to learn from the results.
Pine Script® indicator
by SharpStrat
Billionaire Gold ClubBillionaire Gold Club — Long-Term Gold Trend Follower Overview The Billionaire Gold Club indicator is designed for traders who follow the long-term bullish bias of Gold (XAU/USD). It focuses only on BUY opportunities and encourages patience during market pullbacks. The goal is to trade with the main trend, not against it. Instructions 1. The script automatically plots 7MA (fast) and 200MA (slow). 2. When 7MA crosses above 200MA, a BUY signal appears. 3. When 7MA crosses below 200MA, a Standby signal appears — do not sell, just wait for the next BUY. Usage Rules • Recommended timeframe: 15-minute or higher. • If used below 15 minutes, treat it as day trading — close trades within the same day. • Focus on long-term holding and small lot sizes to protect your capital. Signal Guide 🟢 BUY → Enter the trend direction. 🟠 Standby → Pause new entries and wait patiently. Alerts Set alerts to "Once per bar close": • BUY Signal → Golden Cross confirmed. • Standby Signal → Death Cross confirmed. Philosophy "Obey the rules, and your probability of success increases." This system rewards patience, discipline, and long-term trend following. Follow me for more TradingView scripts and updates. Billionaire Gold Clubは、ゴールド（XAU/USD）の長期上昇トレンドに沿って取引するためのインジケーターです。 基本的にBUYのみを狙い、デッドクロス時はStandby（待機）状態として次のBUYを待ちます。 推奨時間軸：15分足以上。 15分未満で使用する場合はデイトレードとして同日中にクローズすることを推奨します。 ロットを小さく保ち、長期保有で安定した運用を目指してください。
Pine Script® indicator
by hrak22
1
Volume Spike (Multi-Timeframe)Volume Spike (Multi-Timeframe) Overview Volume Spike (Multi-Timeframe) evaluates traded volume against its moving average on a selected timeframe so traders can identify when activity departs from recent norms. What it does Calculates volume on the chart timeframe or any alternate timeframe you select in the inputs. Builds a configurable simple moving average to establish a rolling volume benchmark. Applies distinct colors to spike and baseline volume columns to highlight deviations. Plots the related moving-average line for reference. Registers an alert condition when volume closes above its moving-average baseline. How to use it Choose the desired Volume Timeframe (leave blank to inherit the chart’s period). Tune the Volume MA Length to balance responsiveness and noise. Adjust the spike, base, and MA colors to align with existing chart styling. Enable the alert condition when automated notification of spikes is needed. Implementation notes Timeframe selection is applied consistently to both the raw volume series and its moving average. Color inputs allow visual adjustments without modifying code. Alert messaging specifies that the event is a volume spike relative to the selected timeframe baseline. Disclaimer This indicator is designed as a technical analysis tool and should be used in conjunction with other forms of analysis and proper risk management. Past performance does not guarantee future results, and traders should thoroughly test any strategy before implementing it with real capital.
Pine Script® indicator
by dchunt-stack
Institutional Compression Breakout (ICBO Algo) [@darshakssc]The ICBO Algo is a smart intraday trading tool that detects institutional compression zones followed by breakout confirmation. It combines candle range analysis, volume compression, EMA filtering, and ATR-based Risk/Reward zones to highlight high-probability trade setups with visual clarity. This script is designed for educational and research purposes only, fully aligned with TradingView’s Pine Script policy and publishing guidelines. 🔍 Key Features 🌀 Compression Zone Detection Identifies low-range, low-volume candles often formed before institutional breakouts. 📈📉 Breakout Signals Triggered after confirmed price + EMA breakout post-compression. 📊 Dashboard Panel Displays breakout phase, current R:R ratio, and zone status in real-time. 🟢🔴 Buy/Sell Labels with Emojis Clean and non-intrusive labels for immediate action recognition. 🔔 Alerts Included Receive real-time push, email, or webhook alerts for breakout signals. ⚙️ How It Works Compression Phase: When the candle range and volume are significantly lower than the moving average, the script flags it as a compression zone. Breakout Confirmation: A breakout signal is confirmed when the price breaks the previous high/low and is above/below the trend EMA. Entry Logic: 📈 Buy: Price > previous high + above EMA after compression 📉 Sell: Price < previous low + below EMA after compression ⚠️ Disclaimer This script is intended for educational and research purposes only. It does not constitute financial advice or recommendations of any kind. Always use proper risk management. Past performance does not guarantee future results.
Pine Script® indicator
by darshakssc
TIME Indicator – CET (hour-based) + Bias Forecast + Alerts [EN]TIME Indicator – CET + Bias Forecast + Alerts What it does Splits each day (CET/CEST) into 7 fixed time windows: 0–6, 6–9, 9–12, 12–15, 15–18, 18–22, 22–24. Detects market regime (Bull/Bear/Neutral) automatically from an HTF EMA (configurable), or you can set the regime manually. Maps each day-of-week × window to an expected behavior (Bull/Bear/Neutral/Chop) with strength 1–5 (your research schedule). Backtests on-the-fly: logs each finished window’s return to compute: Hit-rate (directional accuracy on Bull/Bear calls) Average % move (log-return → %) t-stat (significance) Observation counts N Visualizes results via: Heatmap 7×7 (Days × Windows) with selectable metric (Hit-rate / Avg% / t-stat) Day (paged) table Split 2× (long) tables to fit small screens Forecast panel: shows the next N windows (default 8) with labels and color tint based on category + strength. Uses CET midday anchoring to avoid day-shift bugs. Regime logic HTF EMA (length configurable) on a selectable timeframe (HTF for regime/tfStats). “Bull” when price > EMA (optionally EMA slope > 0); “Bear” when price < EMA (slope < 0); else “Neutral”. Tip: for 1h charts use tfStats=240 (4h) for a stable bias; for 2h charts consider 240–360; swing traders can go 360–720. Color language Green shades = Bull (strength 1–5) Red shades = Bear (1–5) Orange = Chop (1–5) Gray = Neutral/Range (1–5) Optional: neutral/chop can be tinted by current regime (setting). Alerts (3 modes) Every window (baseline) – fires at the start of each window, always (for manual verification). Qualified window – fires at window start only if stats meet your thresholds: Min N, Min Hit-rate. Hourly ping (CET) – optional every-hour reminder (also mid-window). Alert message example Monday 6–9 — Mild rise (strength 2) | Regime: Bull | Suggest: Long Hit-rate: 87.4% (N=215) | Avg: 0.23% Key implementation details Uses CET/CEST consistently. “Today” is stabilized by CET midday to prevent DOW misalignment across session boundaries. Windows are computed from CET hour, not exchange sessions, so it’s robust across assets/timezones as long as you want CET logic. Statistics are maintained in arrays (7×7); each completed window updates N, sum of returns, sum of squares, directional hits, etc. Heatmap cells compute metric + color strength dynamically; you can switch the displayed metric from the input. Inputs (most useful) Market regime: Auto (EMA) / Bull / Bear / Neutral EMA length (Auto), HTF for regime (minutes), Require slope Results view: Heatmap 7×7 / Day (paged) / Split 2× (long) Heatmap metric: Hit-rate / Avg % / t-stat Forecast: number of upcoming windows, color opacity, tint neutral by regime Alerts: enable baseline/qualified/hourly, thresholds Min N, Min Hit-rate How to use Pick your chart TF (e.g., 1h). Set HTF for regime (e.g., 240) and EMA length (e.g., 100). Keep Require slope = ON for cleaner bias. Start on Heatmap 7×7 to spot strong day×window pockets. Then use Forecast to see what’s next today/tomorrow. Turn on ALERT: Every window to get a message at the start of every window; optionally add Qualified for filtered calls. In TradingView Alerts dialog choose “Any alert() function call” to receive all alert types. Limitations / notes This is a statistical bias tool, not a signal generator. Combine with price action, liquidity zones, vol regime, news. Hit-rates and averages depend on your symbol/timeframe history; results differ across assets and time ranges. EMA-based regime is HTF-closed; bias flips only after the higher-timeframe bar confirms. Changelog snapshot (current build) Pine v6; fixed DOW alignment via CET midday; refactored forecast (next N windows), new baseline/qualified/hourly alerts, color-tinted neutral/chop, improved table layout and text sizing. If you want, I can also write a short “How to request access” blurb for your private/hidden publication page. Instructions to Traders What this tool shows Day split (CET/CEST): 0–6, 6–9, 9–12, 12–15, 15–18, 18–22, 22–24. For each Day × Window it displays the expected behavior (Bull/Bear/Neutral/Chop) and strength 1–5 based on historical stats. Heatmap metrics: Hit-rate, Avg % move, or t-stat. Quick setup Chart TF: start on 1h (works on 30m–2h too). HTF for regime (EMA bias): 1h chart → 240 (4h) recommended 2h chart → 240–360 Swing (4h/1D) → 360–720 EMA length: 100 (default). Keep Require slope = ON for cleaner Bull/Bear bias. View: start with Heatmap 7×7, then try Forecast to see the next windows. Forecast panel Shows the next N upcoming windows (default 8), with labels and color by category + strength. Uses CET midday anchoring to keep weekdays correct (no “day shift” at midnight). Alerts Enable ALERT: Every window (no filters) to get a message at the start of every window. Optionally enable ALERT: Only when N & Hit-rate ok (filtered alerts) and ALERT: Every hour (CET) ping (hourly reminder). In TradingView’s Create Alert dialog, select “Any alert() function call” to receive all alert types. Alert text includes: Day + Window, regime, suggestion (Long/Short/Wait), Hit-rate, N, Avg %. How to use the bias Treat it as a context/expectation map, not a blind signal. Combine with structure (HH/HL, S/R), liquidity, volatility regime, and risk management. Stronger shades (4–5) = stronger historical tendency; still validate with live price action. Troubleshooting Day names wrong? Ensure Timezone = Europe/Bratislava (CET/CEST) in inputs. “No data / n/a”: load more chart history or switch to a symbol with longer data. Regime feels too jumpy/laggy: adjust HTF for regime and/or EMA length. Access / contact If this script is private and you need access, send your TradingView username with the subject “TIMETrading access”. For support/feedback: describe your symbol, chart TF, HTF setting, and a screenshot. Disclaimer: Statistical tendencies ≠ certainty. This is educational research, not financial advice. Always use stops and size risk responsibly.
Pine Script® indicator
by Denyzzzz
ZLSMA_CEThis indicator combines the power of Chandelier Exit and Zero Lag LSMA (ZLSMA) to provide cleaner trend reversals and early entry alerts. The Chandelier Exit acts as a dynamic stop-loss and trend tracker based on ATR, while ZLSMA smooths price movement with minimal lag — helping traders identify trend continuation or reversals more accurately. When combined, this system provides visual and alert-based Buy/Sell signals that can be used for both swing and intraday strategies.
Pine Script® indicator
by GauravSinghYadav
Golden Cross Screener [Pineify]Golden Cross Screener Pineify – Multi-Symbol Trend Detection Screener for TradingView Discover the Golden Cross Screener Pineify for TradingView: a multi-symbol, multi-timeframe indicator for crypto and other assets. Customizable Golden Cross detection, robust algorithm, and intuitive screener design for smarter portfolio trend analysis. Key Features Multi-symbol screening across major cryptocurrencies or assets – BTCUSD, ETHUSD, XRPUSD, USDT, BNB, SOLUSD, DOGEUSD, TRXUSD (fully customizable). Multi-timeframe analysis (e.g., 1m, 5m, 10m, 30m), enabling robust trend detection from scalp to swing. Customizable Moving Average settings for both Fast and Slow MA (source and length). Efficient screener table, highlighting Golden Cross events and current asset trends in one panel. Visual cues for bullish, bearish, and cross states using intuitive color-coding and labels. Flexible symbol and timeframe inputs to tailor the screener to any portfolio or watchlist. How It Works The Golden Cross Screener Pineify leverages the classic Golden Cross methodology—a bullish trend signal triggered when a shorter-term moving average crosses above a longer-term moving average. To improve robustness, you are empowered to configure both Fast MA and Slow MA periods and sources, making the detection logic applicable to any symbol, timeframe, or asset class. Internally, the script runs dedicated calculations on each chosen symbol and timeframe, generating independent signals using exponential moving averages (EMA). Using the TradingView `request.security` function, it fetches and processes price data for up to eight portfolio assets on four timeframes, displaying the detected Golden Cross, Bullish, or Bearish states in a central screener table. Trading Ideas and Insights Spot emerging bullish or bearish trends across your favorite crypto pairs or trading assets in real time. Capture prime opportunities when multiple assets align with Golden Cross signals—ideal for portfolio rebalancing or rotational strategies. Analyze trend consistency by monitoring cross events at multiple timeframes for a given asset. Swiftly identify when short-term and long-term momentum diverge—flagging potential reversals or trend initiations. The Golden Cross Screener Pineify is not just a trend signal; it’s a holistic multi-asset scanner built for traders who know the power of combining technical breadth with agile timing. How Multiple Indicators Work Together This screener stands out with its modular approach: each asset/timeframe pair is monitored in isolation, yet displayed collectively for multidimensional market insight. Each symbol’s price action is processed through independently configured EMAs—Fast and Slow—whose crossovers are analyzed for directional bias. The implementation’s real innovation is in its screener table engine: it aggregates signals, synchronizes timeframes, and color-codes market states, allowing users to see confluences, divergences, and sector trends at a glance. Combining Golden Cross detection with customizable moving averages and flexible multi-timeframe, multi-symbol scanning means users can fine-tune sensitivity, focus on specific signals, and adapt screener logic for scalping, swing trading, or investing. Unique Aspects True multi-symbol screener within the TradingView indicator framework. Full customization of screener assets, timeframes, and moving averages. Advanced, efficient use of TradingView table for clear, actionable visualization. No dependency on standard, static MA settings—adjust everything to match your strategy. Big-picture and granular trend detection in one tool, designed for both active traders and portfolio managers. How to Use Add the Golden Cross Screener Pineify to your TradingView chart. Choose up to eight symbols—crypto, stock, forex, or custom assets. Set four timeframes for screening, from lower to higher intervals. Adjust moving average sources (price, close, etc.) and period lengths for both Fast and Slow MAs to suit your trading style. Interpret table cells: clear labels and color indicate Golden Cross (trend shift), Bullish (uptrend), Bearish (downtrend) states for each symbol/timeframe. React to signal alignments—deploy or rebalance positions, increase alert sensitivity, or backtest sequence confluences. Customization The indicator’s inputs panel gives full control: Select which symbols to screen, making it perfect for any asset watchlist. Pick the desired timeframes—mix daily, hourly, or minute-based intervals. Adjust Fast and Slow MA settings: switch source type, change period length, and fine-tune detection logic as needed. Style your screener table via TradingView settings (colors, font sizes, alignment). Every element is customizable—adapt the Golden Cross Screener Pineify for your specific portfolio, trading timeframe, and strategy focus. Conclusion The Golden Cross Screener Pineify elevates multi-symbol trend detection to a new level on TradingView. By combining configurable Golden Cross logic with a powerful screener engine, it serves both precision and broad market insight—crucial for agile traders and strategic portfolio managers. Whether you’re tracking crypto pairs, stocks, forex, or a mix, this tool transforms static trend analysis into an active, multi-dimensional trading edge.
Pine Script® indicator
by Pineify
1
SPY200SMA (+4%/-3%) TQQQ/QQQ STRATEGYSummary of the Improved Strategy: When the price of AMEX:SPY is +4% above the 200SMA BUY NASDAQ:TQQQ and when the price of SPY drops to -3% under the SPY 200SMA SELL everything and slowly DCA into NASDAQ:QQQ over the next 6-12 months or until price returns to +4% above the SPY 200SMA at which point you will go back into 100% TQQQ. Note: (if the price of QQQ goes 30% above the 200SMA of QQQ deleverage to QQQ or Sell to protect yourself from dot com level event) More info and stats -https://www.reddit.com/r/LETFs/comments/1nhye66/spy_200sma_43_tqqqqqq_long_term_investment/
Pine Script® strategy
by freefighter07
2
Smart Risk DCA Meter — Adaptive Market Risk EngineThe **Smart Risk DCA Meter** is an adaptive market-risk indicator that helps you invest smarter by scaling your DCA buys based on actual market conditions instead of emotion. It combines momentum, distance from trend, and drawdown factors into a single 0–1 risk score that automatically adjusts to each asset’s volatility — from stable indices like SPX to high-beta assets like BTC. Low readings (green zones) signal opportunity to buy heavier, while high readings (red zones) warn to slow down and protect capital.
Pine Script® indicator
by poseidonpips
TIME-Trading Indicator + AlertsWhat it is A Pine Script study that profiles intraday behavior by day+time windows in CET/CEST, verifies it on history, colors the chart by the expected bias & strength, shows tables/heatmaps with backtest stats, and can alert at the start of each window with a full trading summary. Core ideas Day is split into 7 CET windows: 0–6, 6–9, 9–12, 12–15, 15–18, 18–22, 22–24 (NYC is unified as 15–18 and 18–22 across the whole script.) For each weekday & window we have an expectation (Bull/Bear/Neutral/Chop) with a strength 1–5 and a label (e.g., “Skokový rast”, “Výplach”…). Script backtests those expectations on your chart’s history: Computes return of each window (log-return from first bar open to last bar close of the window). Counts Hit-rate (bull window = return>0; bear window = return<0; neutral/chop excluded). Tracks Avg % drift, t-stat, and sample size N. Trend regime (Auto/Manual) Auto (EMA): price vs EMA(length) on a higher timeframe (configurable) + optional slope filter. Manual override: Bull / Bear / Neutral. Regime is read without look-ahead (uses previous bar’s regime when closing a window). What you see Background shading of the current window – color family by category (green=bull, red=bear, gray=neutral, orange=chop), shade by strength 1–5. Optional labels on window change with regime + label text (“Bull • Najsilnejší rast týždňa”). Forecast panel (bottom-right) listing the next X windows with label & strength. Results tables (three views): Heatmap 7×7 (default): weekday × window grid, each cell shows one metric (toggle among Hit-rate / Avg % / t-stat). Deň (stránkovanie): full stats for a single day (N, Hit-rate, Avg %, t, label). Split 2× (dlhá): two stacked tables (Mon–Thu, Fri–Sun) to fit small screens. Alerts (window start) Optionally fire at the start of every window. Message includes: weekday + window, expectation label, strength, current regime, recommended action (Long/Short/Wait), Hit-rate %, Avg %, and N. Create alerts in TV with Condition → Any alert() function call (so the script’s dynamic text is used). Optional filters (easy to add/adjust): min N, min Hit-rate, only Bull/Bear windows. Inputs you control Regime mode, EMA length, higher-TF for trend check, require EMA slope. CET/CEST timezone (uses “Europe/Bratislava” by default). Toggles: background, labels, forecast, results view, table text size, heatmap metric. Alert enable; (we can add min-N / min-HR filters if you want them by default). How stats are computed (important) A window’s return is measured strictly inside the window (open of first bar → close of last bar). The window is credited to the correct weekday even across midnight. Hit-rate uses only directional windows (Bull/Bear). Neutral/Chop are excluded. Best practices Use chart TF that divides an hour (5/15/30/60m) so window boundaries align cleanly. Read the heatmap primarily by Hit-rate (signal reliability) and cross-check with Avg % (effect size) and t-stat (significance). Trade at the start of a strong window in the direction of the current regime, exit time-based (end of window) or on PT/SL. If you want, I can also: mask/show only cells with N ≥ threshold, add NYC sub-split toggle off/on, export stats to CSV, or add webhooks-friendly compact alert strings.
Pine Script® indicator
by Denyzzzz
Gaussian MACD RSI v2Gaussian Filter MACD Strategy (Zero Cross + RSI Gate) What it does This strategy evaluates momentum using a Gaussian-smoothed MACD and requires a MACD zero-line cross to confirm trend initiation. A configurable RSI threshold filters weak signals, aiming to reduce whipsaws around the zero line. Entries occur only when momentum and baseline strength agree; exits are triggered by MACD crossing below its signal to capture the meat of the move while avoiding discretionary overrides. How it works (concepts, not code) Gaussian MACD: The fast/slow components are smoothed with a Gaussian-style filter to reduce noise relative to standard EMA MACD. Zero-line confirmation: Longs require MACD to cross above zero, aligning entries with positive momentum regimes. RSI gate: A threshold (default 50) further filters entries so that only setups with baseline strength qualify. Exit logic: Positions close when MACD crosses below its signal line, providing an objective exit without trailing logic. Sources: The script supports standard and Heikin-Ashi-derived sources for traders who prefer alternate preprocessing. How to use it Add the strategy to a clean chart. Keep default settings for initial testing; then adjust the RSI threshold and symbol/timeframe for your market. Favor liquid instruments where slippage and fills are reliable. Forward-test and walk-forward before any live use. Default Properties (used for this publication) Initial Capital: $25,000 Order Size: 100% of equity per trade (no leverage). Commission: 0.02% per side. Slippage: 2 ticks (or 0.02% on percent-based markets). Timeframe used for the published chart: 15-minute (example) Dataset: SPY/QQQ/large-cap equities (2+ years) producing 100+ trades in sample. Note: This strategy does not use hard stops by default. If you prefer risk caps ≤ 5–10% per trade, add a stop in the Inputs and re-publish; otherwise, this description explains the deviation per House Rules. Disclosures Backtest results are estimates; real-world fills, slippage, and availability may differ. No guarantee of performance. Use prudent position sizing and independent verification.
Pine Script® strategy
by pjmauldin
Short-Term Capitulation Oscillator (STCO, Diodato 2019)Description: This script is a faithful implementation of the Short-Term Capitulation Oscillator (STCO) from Chris Diodato's 2019 CMT paper, "Making The Most Of Panic". It's a tactical breadth and volume oscillator designed to "fish for market bottoms" by identifying short-term investor capitulation. What It Is The STCO combines the 10-day moving averages of NYSE up-volume and advancing issues. It measures the ratio of advancing momentum (in both volume and number of issues) relative to the total traded momentum. The result is a raw, un-normalized oscillator that typically ranges from 0 to 200. How to Interpret The STCO is a tactical tool for identifying near-term oversold conditions and potential bounces. Low Readings: Indicate that sellers have likely exhausted themselves in the short term, creating a potential entry point for a bounce. The paper found that readings below 90, 85, and 80 were often followed by strong market performance over the next 5-20 days. Overbought/Oversold Lines: Use the customizable overbought/oversold lines to define your own capitulation zones and potential entry areas. Settings Data Sources: Allows toggling the use of "Unchanged" issues/volume data. Thresholds: You can set the overbought and oversold levels based on the paper's research or your own testing.
Pine Script® indicator
by suresh789
Long-Term Capitulation Oscillator (LTCO, Diodato 2019)Description: This script is a faithful implementation of the Long-Term Capitulation Oscillator (LTCO) from Chris Diodato's award-winning 2019 CMT paper, "Making The Most Of Panic". It is a strategic, market-wide breadth and volume oscillator designed to identify major, long-term market bottoms. What It Is The LTCO combines long-term moving averages (34, 55, 89, 144, and 233-day) of NYSE advancing/declining issues and up/down volume. It uses a unique "average of averages" method to create a responsive yet strategic long-term indicator. This script plots the raw, un-normalized value as described in the paper, which typically oscillates in the 700-1100 range. How to Interpret The LTCO is a strategic tool for identifying potentially significant market turning points. Extremely Low Readings: Suggest that a long-term period of selling has reached a point of exhaustion, potentially marking a major bear market low or a generational buying opportunity. The paper backtested various thresholds, with values below 950, 925, and especially 875 showing historically strong forward returns over the next 6-24 months. Overbought/Oversold Lines: The script includes customizable overbought/oversold lines to help you visually identify these critical zones. Settings Data Sources: Allows toggling the use of "Unchanged" issues/volume data for the calculation. Thresholds: You can set the overbought and oversold levels to your preference, based on the paper's findings or your own research.
Pine Script® indicator
by suresh789
Sharpshooter 30 – EMA DistanceSharpshooter 30 – EMA Distance Pullback Detector This indicator is designed for disciplined traders who prefer to wait for deep pullbacks after a clear trend shift. Following a 7/200 EMA death cross, the script “arms” and waits for the Fast EMA to move a configurable USD distance below the Slow EMA. When this distance threshold is reached and confirmed by a closed bar, the script plots a single BUY signal — signaling a potential rebound entry point. Recommended timeframe: 5-minute chart (XAU/USD works best) Key features: • Adjustable EMA lengths • Adjustable USD distance threshold • One-time signal logic to avoid overplotting Philosophy: "Always wait" — patience defines precision. The method aims to catch the first high-probability retracement after trend exhaustion. 日本語説明: Sharpshooter 30は、トレンド転換後の押し目を狙うトレーダー向けのインジケーターです。 7/200 EMAのデッドクロス後、Fast EMAがSlow EMAより一定金額（例：30ドル）下回った確定足でBUYを1度だけ点灯します。 ルールを守り、焦らず待つことを目的としています。 推奨時間軸：5分足（特にXAU/USDで効果的） MA期間や乖離幅は調整可能。
Pine Script® indicator
by hrak22
2