Get started

Moving Averages

Kairos Bands [v1.1]Overview The Kairos Bands Strategy is a highly modular trading system designed to identify high probability entry points based on volatility exhaustion and momentum shifts... It is built with a proprietary core algorithm that detects when price has extended too far from its mean, but it is wrapped in a Confluence Cloud that allows the user to filter these signals through nine different secondary indicators... This is not just a static strategy... It is a framework that allows you to build your own edge by toggling specific filters on and off to match current market conditions... 1... The Chameleon Feature (Trend or Reversal) One of the most powerful features of Kairos Bands is the Inverse Trades logic... Reversal Mode (Default): By default, the strategy looks for price exhaustion... It buys when the market is oversold and sells when the market is overbought... This is ideal for ranging markets or catching tops and bottoms... Trend Following Mode (Inversed): By checking the Inverse Trades box in the settings, the logic flips completely... A Buy signal becomes a Sell and vice versa... This transforms the strategy into a breakout or trend following system, entering trades in the direction of the momentum rather than against it... 2... The Confluence Cloud While the core trigger is based on proprietary volatility calculations, the user has full control over how strictly those trades are filtered... You can toggle any of the following 9 momentum filters independently for both Long and Short setups... RSI (Relative Strength Index) Stochastic Oscillator CCI (Commodity Channel Index) Williams %R MFI (Money Flow Index) CMO (Chande Momentum Oscillator) Fisher Transform Ultimate Oscillator ROC (Rate of Change) For example, you can require RSI and MFI to agree with the main signal for Longs, but only require Stochastic for Shorts... This allows for granular tuning... 3... Trend Bias & Time Management To further refine entries, the strategy includes: EMA Trend Filter: An optional dual EMA system (Fast vs Slow) that forces the strategy to only trade in the direction of the dominant trend... Precision Time Filtering: You can define exact start and end times (down to the minute) for entries... No Trade Zone (NTZ): A specific time window where the strategy is forbidden from holding positions... If a trade is open when the NTZ begins, it is immediately force closed to avoid volatility events or market closes... 4... Risk Management The strategy moves away from vague percentage based stops and uses precision point based targeting... Fixed Points: Set your Take Profit and Stop Loss in exact price points... Signal Skipping: An optional feature to cool down the strategy after a trade closes, forcing it to skip a set number of subsequent signals to avoid over trading... 5... Professional Analytics Dashboard The visual overlay provides a detailed Heads Up Display (HUD) containing institutional grade metrics... Strategy Grade: An automatic A through F grading system based on the Win Rate Differential (how much better the strategy performs compared to a breakeven coin flip)... Streak Analysis: Tracks the maximum and average consecutive wins and losses to help you understand the psychological drawdown risk... Rolling PnL: A secondary dashboard tracks your hypothetical Net PnL over the last 7 trading days and the last 12 months, giving you a clear view of short term and long term performance...
Pine Script® strategy
by kingdomcitizendavid
Gold Trend Tracker - TREND TRACKER DG25Gold Trend Tracker - Complete All-In-One Trading System A professional, institutional-grade trading system specifically optimized for Gold (XAU/USD) that combines multiple technical indicators with session-based filtering and real-time performance tracking. No external indicators required - everything you need is built right in! 🎯 CORE FEATURES Multi-Layered Confirmation System: Dynamic EMA trend filter (default 10-period) with color-coded visualization Optional secondary confirmation EMA (21-period) for stronger validation 3-minute MACD analysis with histogram tracking and direction monitoring MACD bounce detection for high-probability continuation entries Built-in Stochastic RSI (K=3, D=3, RSI Length=14, Stochastic Length=14) Option to connect external Stochastic RSI if preferred Intelligent Signal Generation: Clear BUY/SELL triangles plotted directly on price chart Minimum bars filter to eliminate signal spam and overtrading Higher timeframe signal overlay (optional) - see 3min signals on 15min chart Visual Stochastic RSI threshold cross markers (customizable shapes & sizes) "Show Only First Cross" option to reduce visual clutter Comprehensive alert system for all signal types Advanced Session Management: Pre-configured trading sessions: Asian (1-4am), London (6-9am), NY (12-3pm) Timezone-aware filtering supporting major financial centers: Europe/London America/New_York America/Chicago Europe/Paris Asia/Tokyo Asia/Dubai Color-coded session backgrounds (purple/blue/orange) Individual session toggle switches 24/7 mode for continuous trading (crypto/forex) Signals only generate during active sessions Real-Time Performance Tracking: Live P/L calculation since last signal entry Customizable lot size for accurate dollar calculations Pip movement tracking with automatic conversion Last signal type and duration display Performance color-coding (green profits, red losses) Professional Dashboard: Clean, scalable interface (Small/Medium/Large sizing) Current time and active session display Trading status indicator (TRADING/PAUSED/24/7) Price position relative to Main EMA (ABOVE ↑ / BELOW ↓) Confirmation EMA status (when enabled) 3-minute MACD color, direction arrow, and bar count Stochastic RSI value with color-coded status RSI status: BULLISH/BEARISH/NEUTRAL Source type indicator (Built-in/External) Large, clear SIGNAL display: BUY NOW / SELL NOW / WAIT Performance summary: signal type + price change + dollar value 📊 HOW THE SYSTEM WORKS BUY Signal Requirements: ✓ Price trading ABOVE main EMA (bullish trend confirmation) ✓ 3-minute MACD crosses above zero OR bounces higher after crossover ✓ Stochastic RSI K-line above bullish threshold (default 50) ✓ Within an active trading session (if session filter enabled) ✓ Confirmation EMA aligned (if secondary EMA enabled) ✓ Minimum bars since last signal met (prevents overtrading) SELL Signal Requirements: ✓ Price trading BELOW main EMA (bearish trend confirmation) ✓ 3-minute MACD crosses below zero OR bounces lower after crossover ✓ Stochastic RSI K-line below bearish threshold (default 50) ✓ Within an active trading session (if session filter enabled) ✓ Confirmation EMA aligned (if secondary EMA enabled) ✓ Minimum bars since last signal met (prevents overtrading) Multi-Confirmation Philosophy: This system requires ALL conditions to align before generating a signal. This drastically reduces false signals and increases win rate by only trading the highest-probability setups where trend, momentum, and volume all confirm direction. ⚙️ BUILT-IN STOCHASTIC RSI No External Dependencies: The indicator includes a fully functional Stochastic RSI calculation based on the standard TradingView formula. No need to hunt for compatible indicators or worry about settings mismatches. Default Settings (Optimized for Gold): K Smoothing: 3 D Smoothing: 3 RSI Length: 14 Stochastic Length: 14 Bullish Threshold: 50 Bearish Threshold: 50 How It Works: Calculates RSI on price data Applies Stochastic formula to RSI values Smooths result with K-period SMA Uses K-line (not D-line) for cleaner, faster signals Compares to your bullish/bearish thresholds Generates visual cross markers when thresholds breached Visual Markers: Multiple shape options: Circle, Diamond, Square, Cross Four size options: Tiny, Small, Normal, Large Customizable colors for bullish/bearish crosses "Show Only First Cross" prevents repetitive markers Appears below bars (bullish) or above bars (bearish) Flexibility: Switch to "External" mode to connect your own Stochastic RSI indicator Adjust all calculation parameters to match your trading style Completely disable the filter if you prefer trend + MACD only 🎨 CUSTOMIZATION OPTIONS Indicators: Adjust Main EMA length (default 10) Enable/disable Confirmation EMA (default OFF) Set Confirmation EMA length (default 21) Modify MACD parameters (Fast 5, Slow 14, Signal 9) Enable/disable MACD bounces (default ON) Set max bounces per trend (1-10, default 2) Stochastic RSI: Choose Built-in or External source Adjust K/D smoothing periods Modify RSI and Stochastic lengths Set custom bullish/bearish thresholds Configure cross marker appearance Toggle dashboard display Signals: Show/hide signal triangles Set minimum bars between signals (0-50, default 5) Enable higher timeframe signal overlay Choose HTF timeframe (e.g., 3min on 15min chart) Sessions: Enable/disable session filtering Select your timezone Toggle individual sessions (Asian/London/NY) Customize session start/end hours Show/hide session background colors Display: Choose dashboard size (Small/Medium/Large) Adjust all visual elements Customize colors and styling 💡 PRO TRADING TIPS Session Optimization: London Session (6-9am): Highest volatility, best for breakout trades NY Session (12-3pm): Strong trends, ideal for momentum continuation Avoid Asian Session (1-4am): Lower liquidity, choppier price action Overlap Period (12-3pm London time): Peak volume, clearest signals Signal Filtering: Set 3-5 bars minimum between signals to avoid overtrading Higher values (7-10 bars) for more conservative, swing-style entries Lower values (1-3 bars) for aggressive scalping during high volatility Confirmation EMA Usage: Enable in choppy/ranging markets for extra validation Disable during strong trending conditions (adds lag) Set to 21 for short-term trends, 50 for medium-term MACD Bounce Strategy: Bounces occur when MACD histogram changes direction after crossover Max 2 bounces = optimal (catches first continuation) Max 1 bounce = conservative (only initial momentum shift) Max 3-5 bounces = aggressive (catches multiple waves) Stochastic RSI Thresholds: 50/50 = Balanced (default, works for most conditions) 30/70 = Conservative (fewer but stronger signals) 60/40 = Aggressive (more signals, requires tighter stops) Adjust based on current market volatility Risk Management: Use the performance tracker to trail stops Exit when dashboard shows opposite signal forming Monitor MACD direction arrows for momentum shifts Set profit targets based on average session ranges 🚀 QUICK START GUIDE For Beginners: Add indicator to 3-minute Gold (XAU/USD) chart Leave all default settings (everything is pre-optimized) Enable London session (6-9am) and NY session (12-3pm) Set your timezone to your location Wait for BUY/SELL triangle + "BUY NOW"/"SELL NOW" on dashboard Enter trade when ALL conditions align Exit on opposite signal or dashboard status change For Advanced Traders: Optimize EMA lengths for your preferred timeframe Adjust Stochastic RSI thresholds based on backtesting Fine-tune MACD bounce count for your risk tolerance Enable Confirmation EMA for extra validation Use HTF signal overlay for multi-timeframe confluence Set signal filter to match your trading frequency Customize session times for your specific market focus 📈 BEST TIMEFRAMES Primary: 3-minute chart (system is MACD-optimized for 3min) Alternative: 5-minute, 15-minute (adjust signal filter accordingly) NOT Recommended: 1-minute (too noisy), 1-hour+ (signals too infrequent) Chart Setup: Main Chart: Your preferred timeframe (3min recommended) MACD: Always references 3-minute data internally Stochastic RSI: Calculates on current chart timeframe Session Filter: Works on any timeframe ✅ WHAT MAKES THIS SYSTEM UNIQUE All-In-One Solution: ✓ No hunting for compatible external indicators ✓ No configuration headaches or version conflicts ✓ One indicator = complete trading system Session Intelligence: ✓ Only trades during optimal liquidity periods ✓ Automatically pauses during low-volume sessions ✓ Timezone-aware for global traders Multi-Confirmation: ✓ Trend (EMA) + Momentum (MACD) + Volume (Stochastic RSI) ✓ Drastically reduces false signals ✓ Higher win rate through layered validation Performance Transparency: ✓ Real-time P/L tracking on every trade ✓ Know your performance immediately ✓ Data-driven decision making Professional Grade: ✓ Clean, institutional-style dashboard ✓ Customizable for any trading style ✓ Comprehensive alert system ⚠️ IMPORTANT NOTES This is NOT a "Holy Grail": No indicator is 100% accurate Requires proper risk management Works best during trending conditions May produce whipsaws in choppy/ranging markets Risk Disclosure: Always use stop losses Never risk more than 1-2% per trade Past performance doesn't guarantee future results Practice on demo account first Optimization: Default settings are optimized for Gold (XAU/USD) May require adjustment for other instruments Backtest on your specific market before live trading Different session times may work better for your timezone 🔔 ALERTS INCLUDED BUY Signal Alert SELL Signal Alert Stochastic RSI Cross Above Threshold Stochastic RSI Cross Below Threshold Alert Setup: Click "Create Alert" button Select desired alert condition Choose notification method (popup/email/SMS/webhook) Never miss a high-probability setup! 💬 SUPPORT & UPDATES This indicator is actively maintained and updated based on user feedback. Future updates may include: Additional timeframe options More session presets Enhanced performance analytics Multi-asset optimization Tags: Gold Trading, XAU/USD, Trend Following, MACD Strategy, Stochastic RSI, Session Trading, Day Trading, Scalping, London Session, New York Session, EMA System, Multi-Timeframe Analysis, Trading Dashboard, Performance Tracking
Pine Script® indicator
by DJG9911
4
EDGE Momentum Cloud═════════════════════════════════════════════════════════════ EDGE MOMENTUM CLOUD ═════════════════════════════════════════════════════════════ █ OVERVIEW The EDGE Momentum Cloud is a confluence-based trading system that combines adaptive volatility zones with trend direction analysis to identify high-probability trade setups. Rather than relying on a single indicator, this tool creates a visual "momentum zone" that helps traders understand the current market regime while filtering signals through trend confirmation. The indicator generates two tiers of signals: • Standard Signals — Based on trend direction changes • Premium Signals — Require additional confluence with momentum zone positioning Premium signals represent higher-conviction setups where multiple factors align. █ HOW IT WORKS The EDGE Momentum Cloud combines two core components working together: ❶ MOMENTUM ZONE (CLOUD) Two ATR-based trailing bands create a dynamic volatility envelope ❷ TREND FILTER A customizable moving average determines trend direction ❸ SIGNAL ENGINE Evaluates confluence between trend changes and zone positioning █ THE MOMENTUM ZONE EXPLAINED At the core of this indicator are two ATR-based trailing bands that form the "momentum zone": INNER BAND (FAST) • Tighter trailing stop using a smaller ATR multiplier (default: 3.0×) • Reacts quickly to price changes • Defines the near-term momentum boundary OUTER BAND (SLOW) • Wider trailing stop using a larger ATR multiplier (default: 6.0×) • Provides a more forgiving boundary • Represents the broader momentum envelope The space between these bands creates the Momentum Zone —a visual cloud that expands during volatile conditions and contracts during consolidation. ZONE COLOR INTERPRETATION: • Green Zone = Bullish bias (bands trailing below price) • Red Zone = Bearish bias (bands trailing above price) █ THE TREND FILTER EXPLAINED A customizable moving average acts as the trend direction filter. When the trend line changes direction (turns up or down), the indicator evaluates whether conditions support a trade signal. The trend filter supports 13 different calculation methods , allowing you to match the indicator's responsiveness to your trading style: SMA • EMA • WMA • HMA • VWMA • RMA • LSMA TMA • DEMA • TEMA • DWMA • SSMA • MEDIAN Direction is determined by comparing the current value to a previous value (controlled by Direction Smoothing). Higher smoothing values reduce noise and false direction changes. █ SIGNAL LOGIC ┌──────────────────────────────────────────────────────────── │ STANDARD SIGNALS ├──────────────────────────────────────────────────────────── │ These trigger when the trend filter changes direction: │ │ LONG — Trend filter turns from falling to rising │ SHORT — Trend filter turns from rising to falling │ │ Standard signals indicate a potential trend change but │ do not require zone confluence. └──────────────────────────────────────────────────────────── ┌──────────────────────────────────────────────────────────── │ PREMIUM SIGNALS ├──────────────────────────────────────────────────────────── │ These require confluence between trend change AND │ favorable positioning relative to the momentum zone: │ │ PREMIUM LONG │ • Trend turns up while filter is ABOVE the zone, OR │ • Price breaks into/out of zone during recent bullish trigger │ │ PREMIUM SHORT │ • Trend turns down while filter is BELOW the zone, OR │ • Price breaks into/out of zone during recent bearish trigger │ │ Premium signals have built-in confluence and typically │ offer better risk/reward setups. └──────────────────────────────────────────────────────────── █ VISUAL ELEMENTS ZONE COMPONENTS • Inner Band — Fast trailing stop (thin line) • Outer Band — Slow trailing stop (thick line) • Zone Fill — Shaded area between bands showing momentum regime TREND COMPONENTS • Trend Line — Moving average with slope-based coloring • Green = Rising trend • Red = Falling trend • Purple = Neutral (if color by direction disabled) SIGNAL MARKERS • Triangle Up + "Long" — Standard long signal • Triangle Down + "Short" — Standard short signal • Label Up + "P.Long" — Premium long signal • Label Down + "P.Short" — Premium short signal CROSS MARKERS • Small triangles appear when price crosses the inner or outer bands • Up triangles = Price crossing above band • Down triangles = Price crossing below band BAR COLORING • Teal bars = Price above the zone (bullish territory) • Pink bars = Price below the zone (bearish territory) • Purple bars = Price inside the zone (transitional) █ CONFIGURABLE SETTINGS ┌──────────────────────────────────────────────────────────── │ GENERAL SETTINGS ├──────────────────────────────────────────────────────────── │ Confirmed Signals Only (Default: ON) │ • When enabled, signals wait for bar close before triggering │ • Prevents repainting on live bars │ • Recommended: Keep ON for live trading │ │ Display Standard Signals (Default: ON) │ • Show/hide basic trend-change signals │ │ Display Premium Signals (Default: ON) │ • Show/hide confluence-based signals │ │ Tint Price Bars (Default: ON) │ • Color bars based on position relative to zone └──────────────────────────────────────────────────────────── ┌──────────────────────────────────────────────────────────── │ MOMENTUM ZONE SETTINGS ├──────────────────────────────────────────────────────────── │ Fast ATR Length (Default: 10) │ • Lookback period for inner band's ATR calculation │ • Lower = More reactive to recent volatility │ • Higher = Smoother, less reactive │ │ Fast Band Factor (Default: 3.0) │ • Multiplier for inner band distance from price │ • Lower = Tighter band, more signals │ • Higher = Wider band, fewer signals │ │ Slow ATR Length (Default: 10) │ • Lookback period for outer band's ATR calculation │ │ Slow Band Factor (Default: 6.0) │ • Multiplier for outer band distance from price │ • Should be larger than Fast Band Factor │ • Creates the width of the momentum zone └──────────────────────────────────────────────────────────── ┌──────────────────────────────────────────────────────────── │ TREND FILTER SETTINGS ├──────────────────────────────────────────────────────────── │ Display Trend Line (Default: ON) │ • Show/hide the moving average line │ │ Resolution (Default: Chart Timeframe) │ • Timeframe for MA calculation │ • Leave blank to use current chart timeframe │ • Set higher timeframe for broader trend alignment │ │ Lookback Period (Default: 20) │ • Moving average period length │ • Lower = Faster, more signals │ • Higher = Slower, fewer signals │ │ Calculation Method (Default: SMA) │ • Choose from 13 MA types │ • HMA and TEMA are faster/more responsive │ • SMA and TMA are slower/smoother │ │ Direction Smoothing (Default: 2) │ • Bars to look back for slope comparison │ • Higher values reduce false direction changes │ • Range: 1-10 │ │ Color By Direction (Default: ON) │ • Color the trend line based on its slope └──────────────────────────────────────────────────────────── ┌──────────────────────────────────────────────────────────── │ VISUAL SETTINGS ├──────────────────────────────────────────────────────────── │ Bullish Color — Color for bullish elements (default: green) │ Bearish Color — Color for bearish elements (default: red) │ Neutral Color — Color for neutral/transitional states │ Zone Fill — Opacity for the momentum zone fill └──────────────────────────────────────────────────────────── █ ALERTS This indicator includes five configurable alerts: ① STANDARD LONG Triggers on basic bullish trend change signal ② STANDARD SHORT Triggers on basic bearish trend change signal ③ PREMIUM LONG Triggers on high-confluence bullish signal ④ PREMIUM SHORT Triggers on high-confluence bearish signal ⑤ ANY SIGNAL Triggers on any of the above conditions To enable alerts: 1. Right-click on the indicator → "Add Alert" 2. Select the condition you want to be alerted on 3. Configure notification method (popup, email, webhook, etc.) █ RECOMMENDED USAGE TIMEFRAME • Works on any timeframe • Lower timeframes (1m-15m) generate more signals • Higher timeframes (1H-Daily) generate fewer, higher-quality signals BEST PRACTICES • Keep "Confirmed Signals Only" enabled for live trading • Premium signals typically offer better risk/reward than Standard • Use zone position as context—bullish setups above zone, bearish below • Consider higher timeframe resolution for trend filter to align with broader trend • Combine with support/resistance or supply/demand for complete trade plans INTERPRETATION TIPS • Wide zones suggest increased volatility • Narrow zones suggest consolidation • Cross markers at bands can serve as early warnings of regime changes • Bar colors provide quick visual reference of market position █ SIGNAL QUALITY GUIDE ┌─────────────────┬────────────────────────────────────────┐ │ HIGHEST QUALITY │ Premium signal + Price clearly │ │ │ positioned on correct side of zone │ ├─────────────────┼────────────────────────────────────────┤ │ GOOD QUALITY │ Premium signal + Price inside zone │ ├─────────────────┼────────────────────────────────────────┤ │ MODERATE │ Standard signal + Price on correct │ │ │ side of zone │ ├─────────────────┼────────────────────────────────────────┤ │ LOWER QUALITY │ Standard signal + Price on wrong │ │ │ side or inside zone │ └─────────────────┴────────────────────────────────────────┘ █ Final Note This Indicator was designed specifically for the ATR cloud and the levels it provides. The buy and sell signals are a byproduct of development but more of a secondary feature. This product is published so you can take advantage of the proprietary calculations we used to make our own ATR cloud that provides excellent areas of support and resistance. PLEASE NOTE: The "EDGE MTF ATR Bias Matrix" study that supplies the table notifying you of support and resistance is made through these ATR calculations and would pair perfectly with this study. █ DISCLAIMER This indicator is provided for educational and informational purposes only. It is not financial advice and should not be construed as a recommendation to buy or sell any financial instrument. The signals generated by this indicator are based on technical analysis calculations and do not guarantee any specific outcome. Always conduct your own analysis and use proper risk management.
Pine Script® indicator
by RyanBaileyEdge
1
SCOTTGO - RVOL Bull/Bear Painter (Real-Time) SCOTTGO - RVOL Bull/Bear Painter (Real-Time Momentum Detection) 📌Overview The RVOL Bull/Bear Painter is a Pine Script indicator designed to instantly highlight high-momentum candles driven by significant Relative Volume (RVOL). It provides a clear visual signal (bar color, shape, and label) when a candle's volume exceeds its average by a user-defined threshold, confirming strong bullish or bearish interest in real-time. This helps traders quickly identify potential institutional accumulation/distribution or breakout/breakdown attempts. ✨ Key Features Relative Volume (RVOL) Calculation: Automatically calculates the ratio of the current bar's volume to its moving average (SMA or EMA) over a customizable lookback period. Momentum Confirmation: Paints the candle green (bullish) or red (bearish) only when both price direction and high RVOL criteria are met. Real-Time Detection: Uses a plotshape method to display the signal triangle as soon as the RVOL and direction conditions are met on the currently forming candle, aiming for faster alerts than bar-close coloring. Customizable Threshold: Easily adjust the RVOL multiplier (e.g., 1.5x, 2.0x, 3.0x) to filter out noise and only focus on truly significant volume events. Labels and Alerts: Displays a volume multiplier label (e.g., BULL 2.55x) and includes pre-configured alert conditions for automated notifications. 🛠️ How to Use It 1. Identify High-Conviction Moves Look for the painted candles and the corresponding labels. A candle painted green with a BULL label (e.g., BULL 2.5x) indicates that buyers stepped in with 2.5 times the typical volume to drive the price higher. 2. Configure Your Sensitivity The power of the script lies in customizing the inputs: RVOL Lookback Period: Determines the length of the volume moving average. Shorter periods (e.g., 9-20) make the indicator more reactive to recent volume changes. Longer periods (e.g., 50-200) require a much larger volume spike to trigger a signal. RVOL Threshold: This is the multiplier. Lower values (e.g., 1.5) will generate more signals. Higher values (e.g., 3.0) will generate fewer, but generally higher-conviction, signals. 3. Set Up Alerts Use the pre-configured alert conditions (Bullish RVOL Signal and Bearish RVOL Signal) in TradingView's alert menu. Crucially, set the alert frequency to "Once per bar" or "Once per minute" to receive notifications as soon as the high RVOL event occurs, without waiting for the bar to close.
Pine Script® indicator
by SCOTTGO
Danny Gee EMA Trend RibbonDanny Gee EMA Trend Ribbon - Multi-Timeframe Trend Analysis A sophisticated 9-EMA ribbon system designed to visualize trend strength and direction with precision. This indicator creates a dynamic color-coded ribbon that adapts to market conditions, making trend identification effortless. Key Features: 9 Customizable EMAs - Default periods: 8, 14, 20, 26, 32, 38, 44, 50, and 60 Intelligent Ribbon Coloring - Automatically displays bullish (green), bearish (red), or neutral (gray) based on EMA consensus Smoothing Control - Adjustable smoothing period (default 2) reduces noise and false signals Real-Time Trend Status - Live dashboard showing current trend state and EMA agreement count (e.g., "Bullish 8/9") Visual Clarity - Color-coded EMA lines with the 60 EMA highlighted for key support/resistance How It Works: The indicator analyzes the slope direction of all 9 EMAs. When 7 or more EMAs agree on direction, the ribbon displays a clear bullish or bearish color. This consensus-based approach helps filter out weak or conflicting trends, keeping you focused on high-probability setups. Best Used For: ✓ Identifying strong trending conditions ✓ Avoiding choppy, sideways markets ✓ Confirming trade direction with other indicators ✓ Multi-timeframe analysis (works on any chart timeframe) Customization Options: Adjust all EMA periods to match your trading style Customize ribbon colors for personal preference Toggle ribbon visibility on/off Modify smoothing sensitivity Perfect for swing traders, scalpers, and day traders looking for a clean, reliable trend filter that works across all markets - forex, crypto, stocks, and indices.
Pine Script® indicator
by DJG9911
FVG DUAL HTF ALERTS - DG - FVG Dual HTF ALERTS DG - Confluence & Strength Professional Fair Value Gap (FVG) Trading Indicator with Advanced HTF Analysis This powerful indicator identifies and tracks Fair Value Gaps across two customizable higher timeframes (HTF), providing traders with precise entry zones, strength ratings, and real-time alerts for high-probability trading setups. 🎯 KEY FEATURES Dual HTF Analysis Two independent HTF settings - Analyze FVGs from any timeframe (1min to Daily) Works on ALL timeframes - View 15min and 60min FVGs on your 1min chart HTF confluence detection - Automatically highlights when both HTFs align Customizable colors - Distinct colors for HTF1 and HTF2 zones Intelligent Strength Scoring (0-10) Each FVG receives a comprehensive strength rating based on: Gap size relative to ATR Volume analysis vs 20-period average Current timeframe FVG confluence (★ indicator) Trading session timing (London/NY sessions) Large gap bonus HTF confluence bonus Rating System: 8-10 = 🔥 PREMIUM (Green) - Highest probability setups 5-7 = ✅ GOOD (Yellow) - Quality opportunities 0-4 = ⚠️ WEAK (Gray) - Lower confidence zones Sweet Spot Inner Boxes Precision entry zones - 10% inner box (customizable 1-50%) BUY/SELL labels - Clear directional indicators Customizable styling - Colors, borders, and text size Entry optimization - Target the highest probability area within each FVG Advanced Trading Tools Automatic Entry/Stop/Target Lines - Up to 3 closest FVGs displayed simultaneously Risk/Reward calculator - Shows R multiples and dollar values Customizable position sizing - Micro, mini, or standard lots Entry offset adjustment - Fine-tune entries ±50 pips from sweet spot center Smart Fill Detection HTF candle-based fills - Only checks for fills on HTF candle closes (not every lower TF bar) Multiple fill methods: Any Touch - Most sensitive Midpoint Reached - Balanced Wick Sweep - Conservative (default) Body Beyond - Most strict Touched tracking - Visual feedback when zones are tested Comprehensive Alert System 8 Individual Alerts: HTF1: Bullish/Bearish Zone Entry HTF1: BUY/SELL Sweet Spot Entry HTF2: Bullish/Bearish Zone Entry HTF2: BUY/SELL Sweet Spot Entry 4 Combined Alerts: ANY HTF: Bullish/Bearish Zone Entry ANY HTF: BUY/SELL Sweet Spot Entry Plus: Optional alerts for high-strength FVGs (8+) Information Dashboard Real-time market context display: Gold Daily & 1H - Bullish/bearish bias with range in pips Distance to nearest FVGs - Bull and bear zones IN ZONE indicator - Shows when price enters sweet spots with strength rating Optional BTC tracking - Monitor Bitcoin FVGs and bias simultaneously ⚙️ CUSTOMIZATION OPTIONS Display Settings Max FVGs to show per type (1-100) Show only untouched FVGs option Center line styling (solid/dashed/dotted) Label visibility and colors Strength color coding Trading Parameters Stop loss (1-100 pips) Take profit (1-200 pips) Entry offset adjustment Lot size (0.01-100) Dollar value display toggle Advanced Options Min strength filter (0-10) Current TF confluence check Lookback period (20-200 bars) Max bars back (1-5000) Require body close through gap Test mode: Disable fill removal 💡 IDEAL FOR Scalpers - 1min/3min charts viewing 5min/15min FVGs Day Traders - 5min/15min charts viewing 15min/60min FVGs Swing Traders - 1H/4H charts viewing 4H/Daily FVGs Gold (XAU/USD) traders - Built-in gold bias indicators Multi-timeframe analysis - See the bigger picture while trading lower TFs 🎓 HOW TO USE Add to chart - Works best on 1-5min charts for intraday trading Set your HTFs - Recommended: 15min + 60min for scalping Watch for confluence - Green/orange borders indicate HTF alignment Filter by strength - Focus on 8+ rated zones for best probability Enter at sweet spots - Wait for price to reach inner boxes Set alerts - Get notified when price enters high-quality zones Manage risk - Use provided entry/stop/target lines 📊 BEST PRACTICES ✅ DO: Focus on 8+ strength FVGs during London/NY sessions Look for HTF confluence (lime/orange borders) Wait for sweet spot entries (inner boxes) Trade in the direction of HTF bias Use multiple timeframe confirmation ❌ DON'T: Trade low-strength FVGs (below 5) unless confirmed Ignore the HTF bias indicators Chase price - let it come to the zones Trade without stops Overtrade - quality over quantity 🔧 TECHNICAL NOTES Max 500 boxes/lines/labels - Optimized for performance Lookahead enabled - Accurate HTF data on lower timeframes No repainting - All signals confirmed on bar close Compatible with all brokers - Works on any instrument with FVGs Mobile friendly - Clean display on all devices 📈 PERFORMANCE TIPS For best results on lower timeframes (1min/3min): Set "Max Bars Back" to 2000-3000 Set "Max FVGs Per Type" to 20-50 Use "Body Beyond" fill method for longer zone visibility Enable "Check Current TF FVGs" for additional confluence 🎨 COLOR RECOMMENDATIONS HTF1 (15min): Bull: Blue (#2962FF80) Bear: Red (#f2364580) HTF2 (60min): Bull: Purple (#9C27B080) Bear: Light Red (#FF6B6B80) Confluence: Bull: Green (#00FF0060) Bear: Orange (#FF6B0060) 💬 SUPPORT Created by DJG9911 For questions, feature requests, or bug reports, please use the TradingView comments section. Version: 6.0 License: Mozilla Public License 2.0 Last Updated: December 2024 Disclaimer: This indicator is for educational and informational purposes only. Always practice proper risk management and never risk more than you can afford to lose. Past performance does not guarantee future results.
Pine Script® indicator
by DJG9911
Liquidity Pools Smart Entry + Multi-TF Targets + VWAPOverview This indicator is designed to help traders identify high-probability institutional-style entries using concepts from ICT (Inner Circle Trader) methodology. It combines liquidity pool detection, fair value gaps (FVG), swing levels, killzones, ATR-based targets, VWAP bias, and optional multi-timeframe analysis. The script provides visual trade signals and a green-light confirmation system to streamline decision-making and reduce overtrading. Key Features Market Structure Detects CHoCH (Change of Character) and BOS (Break of Structure). Marks bullish and bearish breaks with labels on the chart. Liquidity & Swings Highlights Swing High/Low liquidity zones (SSL/BSL). Shows horizontal swing lines for reference. Fair Value Gap (FVG) Detection Bullish and bearish gaps are plotted as shaded boxes. Identifies potential institutional entry zones. Killzones Highlights London and New York sessions. Helps align trades with high liquidity periods. VWAP Filter Plots the intraday VWAP. Optional VWAP bias filter ensures trades follow intraday institutional flow. Multi-Timeframe Confirmation Supports 5-minute entry confirmation. Shows SL/TP for both current TF and 5-min TF signals. ATR-Based Stops & Targets Entry signals automatically calculate SL (1.5 ATR) and TP (ATR x multiplier). Customizable ATR multiplier. Trade Light System Visual green/red/gray indicators: 🟢 Green: All bullish conditions aligned → LONG allowed. 🔴 Red: All bearish conditions aligned → SHORT allowed. ⚪ Gray: Wait → conditions not aligned. Inputs Input Description Show CHoCH/BOS Toggle structure labels on/off Show Killzones Toggle session backgrounds on/off Show Swing Liquidity Show SSL/BSL swing points Show Horizontal Lines Extend swing lines horizontally Show FVG Zones Show Fair Value Gaps Show VWAP Display intraday VWAP Swing Length Number of bars to calculate swing pivots ATR Target Multiplier Multiplies ATR for TP calculation Use HTF 200 EMA Filter Filter entries with higher timeframe trend Use RSI Filter Filter entries using RSI 14 Use Volume Filter Filter entries with high volume confirmation Use ATR Filter Filter entries based on ATR expansion Use VWAP Filter Only allow trades in VWAP direction How to Read the Chart Structure Labels BOS ↑ / BOS ↓: Breaks of structure showing trend direction. Swing Liquidity SSL (blue): Bullish swing low liquidity. BSL (red): Bearish swing high liquidity. FVG Zones Green boxes: Potential bullish liquidity gaps. Red boxes: Potential bearish liquidity gaps. Killzones Green background: London session. Blue background: New York session. VWAP Purple line: Intraday volume-weighted average price. Trade Lights 🟢 Green: All bullish conditions met — LONG ready. 🔴 Red: All bearish conditions met — SHORT ready. ⚪ Gray: Wait — conditions not aligned. Entry Labels Shows Entry price, SL, TP. Separate labels for current TF and 5-min confirmation. How to Use Step 1: Identify Market Bias Check HTF EMA: price above → bullish trend, below → bearish trend. Check VWAP (if enabled): trade in direction of VWAP for institutional alignment. Check Killzones: prefer entries during London or New York sessions. Step 2: Confirm Entry Conditions Wait for BOS / CHoCH to align with your trend. Look for FVG zone and SSL/BSL liquidity. Ensure RSI, ATR, Volume, VWAP filters (if enabled) all confirm. Green/red Trade Light should be active. Step 3: Place Trade Use Entry Label price as reference. SL: 1.5 ATR away. TP: ATR x multiplier away. Optional: check 5-min multi-TF confirmation label for additional confidence. Step 4: Manage Trade Follow ATR-based SL/TP. Move stop to break-even after partial target if desired. Only take trades when Trade Light is GREEN (LONG) or RED (SHORT). Best Practices Combine with volume profile or order block analysis for higher precision. Avoid trading outside killzones. Use multi-TF confirmation for safer entries. Adjust ATR multiplier according to market volatility.
Pine Script® indicator
by garethwest1982
Context Bundle | VWAP / EMA / Session HighLow (v6) 📌 0DTE Context Bundle (v6) **VWAP • EMA Cloud • Session High/Low (NY / London / Asia) The **0DTE Context Bundle** is a *decision-making overlay*, not a signal spam indicator. It’s designed to help traders clearly see **value, trend, and liquidity levels** across **New York, London, and Asia sessions** — all in one clean, customizable tool. Built for **NQ, ES, Gold, and FX pairs**, with a focus on **5–15-minute execution charts**. --- ## 🔹 What This Indicator Shows ### ✅ VWAP + ATR Bands * Session VWAP (fair value) * ATR-based extension bands (1x / 2x) * Helps identify **overextension, mean reversion zones, and trend pullbacks** ### ✅ EMA 9 / 21 Cloud * Visual trend and momentum filter * Custom colors + opacity * Identifies **trend continuation vs chop** ### ✅ Session High / Low Levels * **New York RTH** * **London** * **Asia (midnight-safe)** * Optional previous session highs/lows * Adjustable line styles, widths, colors, and extensions ### ✅ Anchored VWAP (Optional) * Reset by: * Daily * NY session start * London session start * Asia session start * Useful for tracking **session-specific value shifts** --- ## 🔹 How Traders Use It This indicator is meant to answer: * *Are we trading at value or extension?* * *Is the market trending or rotating?* * *Where is liquidity likely sitting right now?* Common use cases: * Trend pullbacks into VWAP or EMA cloud * Reversal setups at session highs/lows * Session breakout + retest confirmation * Overnight context for London and Asia sessions --- ## 🔹 Customization & Flexibility Every component can be toggled and styled: * Colors, widths, line styles * Cloud up/down colors + opacity * Session visibility and extensions * VWAP band multipliers and ATR length Members can adapt it to **their own style**, market, and timeframe. --- ## ⚠️ Disclaimer This indicator is provided for **educational and informational purposes only**. It does **not** provide financial advice or trade signals. Always manage risk and confirm entries with your own strategy.
Pine Script® indicator
by TradeswithB
Hybrid Trend-Following Inside Bar BreakoutHybrid Trend-Following Inside Bar Breakout Strategy The Hybrid Trend-Following Inside Bar Breakout Strategy is a rule-based trading system designed to capture strong directional moves while controlling risk during uncertain market conditions. It combines trend-following, price action, and volatility-based risk management into a single robust framework. Core Concept The strategy trades inside bar breakouts only in the direction of the dominant market trend. Inside bars represent periods of consolidation, and when price breaks out of this consolidation in a trending market, it often leads to impulsive moves with favorable risk–reward characteristics. Key Components 1. Trend Filter Uses 50 EMA and 200 EMA to define the market trend. Bullish bias: 50 EMA above 200 EMA Bearish bias: 50 EMA below 200 EMA This filter prevents counter-trend trades and improves trade quality. 2. Volatility Filter Compares fast ATR (14) with slow ATR (50). Trades are taken only when volatility is expanding or above a minimum threshold. This avoids low-volatility, choppy market conditions. 3. Inside Bar Breakout An inside bar forms when the current candle’s high is lower than the previous candle’s high and the low is higher than the previous candle’s low. A trade is triggered only when price breaks above or below the inside bar range in the direction of the trend. 4. Candle Quality Filter Requires a minimum body-to-range ratio, ensuring that the breakout candle has strong momentum and is not driven by weak wicks. Risk Management & Trade Management Stop Loss (SL) Placed using ATR-based dynamic stops, adapting to current market volatility. Prevents tight stops in volatile conditions and wide stops in calm markets. Partial Profit Taking 50% of the position is exited at 1.5R, locking in profits early. This reduces psychological pressure and improves equity stability. Trailing Stop After partial profit is taken, the remaining position is managed with an ATR-based trailing stop. Allows the strategy to capture large trend moves while protecting gains. Cooldown Mechanism After a losing trade, the system enters a cooldown period and skips a fixed number of bars. This helps avoid revenge trading and overtrading during unfavorable market phases. Why This Strategy Works Trades only high-probability breakouts in trending markets Adapts automatically to changing volatility Combines price action precision with systematic risk control Designed for consistent performance over long historical periods
Pine Script® strategy
by JeET369
Trend Prediction Meter [PointAlgo]The Trend Prediction Meter & Levels is a composite market-bias and volatility visualization tool designed to summarize trend strength, momentum, price positioning, and volatility into a single normalized score. It provides a structured framework to interpret directional bias and probable price expansion zones during active market conditions. Concept Overview Markets often reflect multiple conditions simultaneously—trend direction, momentum strength, price location within a range, and volatility. This indicator combines these elements into a unified Bullish Score (0–100), displayed as a meter and supported by projected ATR-based levels. Rather than focusing on a single signal, the script aims to present context about current market conditions. Bullish Score Composition (0–100) The meter represents a weighted blend of multiple market factors: 1. Trend Strength (EMA Structure) Uses a fast and slow EMA to assess directional bias. The distance between EMAs is normalized into a trend strength score. Strong separation indicates directional conviction; compression suggests balance. 2. Momentum Strength (RSI Blend) Combines a short-term and mid-term RSI. Helps capture both immediate momentum and broader directional stability. Higher readings indicate sustained bullish pressure, lower readings indicate bearish pressure. 3. Position Within Recent Range Measures where price is trading relative to its recent high–low range. Values near the top of the range reflect strength; values near the bottom reflect weakness. Mid-range positioning indicates equilibrium. 4. Volume Participation Compares current volume against its recent average. Acts as a minor confidence modifier rather than a primary driver. Each component is normalized and combined using fixed weights to produce a final Bullish Score between 0 and 100. Bias Classification The Bullish Score is translated into descriptive market states: Extreme Bullish Very Bullish Bullish Neutral Bearish Very Bearish These labels describe current bias, not future certainty. Meter Visualization The meter plot dynamically changes color based on the score range. A dashed midline at 50 represents balance. Background shading highlights strong bullish or bearish dominance zones. Crossovers of the 50-level indicate shifts in directional control. ATR-Based Projection Levels: To provide volatility context, the indicator calculates ATR-based upside and downside reference levels: Two potential expansion levels (TP1 and TP2) are projected above and below price. The distance of these levels adapts based on current bias strength. These levels are contextual reference zones, not fixed targets. Prediction Dashboard An optional side table summarizes key readings at the most recent bar: Symbol Current bias label Bullish Score Current price ATR value Upside and downside projection levels Directional comment (Upside favoured / Downside favoured / Balanced) This dashboard is designed to provide a quick structural overview without requiring manual calculation. Signals & Alerts Built-in alerts are available for: Bullish bias conditions Bearish bias conditions Bullish Score crossing above 50 Bullish Score crossing below 50 Alerts are informational and reflect internal state changes only. Customization: Users can adjust: RSI lengths EMA lengths Range lookback period ATR parameters Display options for the meter and dashboard This allows adaptation across different instruments and timeframes. Usage Notes Best suited for analytical interpretation rather than standalone decision-making. Designed to complement price action, structure, or other indicators. Works across multiple markets where volume and volatility data are available. Disclaimer : This indicator is intended for educational and analytical purposes only. It does not provide investment, trading, or financial advice. All signals and levels should be validated with independent analysis and appropriate risk management.
Pine Script® indicator
by pointalgo
Relative Strength Index_YJ//@version=5 indicator(title="MACD_YJ", shorttitle="MACD_YJ",format=format.price, precision=2) source = close useCurrentRes = input.bool(true, title="Use Current Chart Resolution?") resCustom = input.timeframe("60", title="Use Different Timeframe? Uncheck Box Above") smd = input.bool(true, title="Show MacD & Signal Line? Also Turn Off Dots Below") sd = input.bool(false, title="Show Dots When MacD Crosses Signal Line?") sh = input.bool(true, title="Show Histogram?") macd_colorChange = input.bool(true, title="Change MacD Line Color-Signal Line Cross?") hist_colorChange = input.bool(true, title="MacD Histogram 4 Colors?") // === Divergence inputs === grpDiv = "Divergence" calculateDivergence = input.bool(true, title="Calculate Divergence", group=grpDiv, tooltip="피벗 기반 정/역배 다이버전스 탐지 및 알람 사용") lookbackRight = input.int(5, "Lookback Right", group=grpDiv, minval=1) lookbackLeft = input.int(5, "Lookback Left", group=grpDiv, minval=1) rangeUpper = input.int(60, "Bars Range Upper", group=grpDiv, minval=1) rangeLower = input.int(5, "Bars Range Lower", group=grpDiv, minval=1) bullColor = input.color(color.new(#4CAF50, 0), "Bull Color", group=grpDiv) bearColor = input.color(color.new(#F23645, 0), "Bear Color", group=grpDiv) textColor = color.white noneColor = color.new(color.white, 100) res = useCurrentRes ? timeframe.period : resCustom fastLength = input.int(12, minval=1) slowLength = input.int(26, minval=1) signalLength= input.int(9, minval=1) fastMA = ta.ema(source, fastLength) slowMA = ta.ema(source, slowLength) macd = fastMA - slowMA signal = ta.sma(macd, signalLength) hist = macd - signal outMacD = request.security(syminfo.tickerid, res, macd) outSignal = request.security(syminfo.tickerid, res, signal) outHist = request.security(syminfo.tickerid, res, hist) // 가격도 같은 res로 hi_res = request.security(syminfo.tickerid, res, high) lo_res = request.security(syminfo.tickerid, res, low) // ── Histogram 색 histA_IsUp = outHist > outHist and outHist > 0 histA_IsDown = outHist < outHist and outHist > 0 histB_IsDown = outHist < outHist and outHist <= 0 histB_IsUp = outHist > outHist and outHist <= 0 macd_IsAbove = outMacD >= outSignal plot_color = hist_colorChange ? (histA_IsUp ? color.new(#00FF00, 0) : histA_IsDown ? color.new(#006900, 0) : histB_IsDown ? color.new(#FF0000, 0) : histB_IsUp ? color.new(#670000, 0) : color.yellow) : color.gray macd_color = macd_colorChange ? color.new(#00ffff, 0) : color.new(#00ffff, 0) signal_color = color.rgb(240, 232, 166) circleYPosition = outSignal // 골든/데드 크로스 (경고 해결: 먼저 계산) isBullCross = ta.crossover(outMacD, outSignal) isBearCross = ta.crossunder(outMacD, outSignal) cross_color = isBullCross ? color.new(#00FF00, 0) : isBearCross ? color.new(#FF0000, 0) : na // ── 플롯 plot(sh and outHist ? outHist : na, title="Histogram", color=plot_color, style=plot.style_histogram, linewidth=5) plot(smd and outMacD ? outMacD : na, title="MACD", color=macd_color, linewidth=1) plot(smd and outSignal? outSignal: na, title="Signal Line", color=signal_color, style=plot.style_line, linewidth=1) plot(sd and (isBullCross or isBearCross) ? circleYPosition : na, title="Cross", style=plot.style_circles, linewidth=3, color=cross_color) hline(0, "0 Line", linestyle=hline.style_dotted, color=color.white) // ===================== // Divergence (정배/역배) - 피벗 비교 // ===================== _inRange(cond) => bars = ta.barssince(cond) rangeLower <= bars and bars <= rangeUpper plFound = false phFound = false bullCond = false bearCond = false macdLBR = outMacD if calculateDivergence // 정배: 가격 LL, MACD HL plFound := not na(ta.pivotlow(outMacD, lookbackLeft, lookbackRight)) macdHL = macdLBR > ta.valuewhen(plFound, macdLBR, 1) and _inRange(plFound ) lowLBR = lo_res priceLL = lowLBR < ta.valuewhen(plFound, lowLBR, 1) bullCond := priceLL and macdHL and plFound // 역배: 가격 HH, MACD LH phFound := not na(ta.pivothigh(outMacD, lookbackLeft, lookbackRight)) macdLH = macdLBR < ta.valuewhen(phFound, macdLBR, 1) and _inRange(phFound ) highLBR = hi_res priceHH = highLBR > ta.valuewhen(phFound, highLBR, 1) bearCond := priceHH and macdLH and phFound // 시각화 (editable 파라미터 삭제) plot(plFound ? macdLBR : na, offset=-lookbackRight, title="Regular Bullish (MACD)", linewidth=2, color=(bullCond ? bullColor : noneColor), display=display.pane) plotshape(bullCond ? macdLBR : na, offset=-lookbackRight, title="Bullish Label", text=" Bull ", style=shape.labelup, location=location.absolute, color=bullColor, textcolor=textColor, display=display.pane) plot(phFound ? macdLBR : na, offset=-lookbackRight, title="Regular Bearish (MACD)", linewidth=2, color=(bearCond ? bearColor : noneColor), display=display.pane) plotshape(bearCond ? macdLBR : na, offset=-lookbackRight, title="Bearish Label", text=" Bear ", style=shape.labeldown, location=location.absolute, color=bearColor, textcolor=textColor, display=display.pane) // 알람 alertcondition(bullCond, title="MACD Regular Bullish Divergence", message="MACD 정배 다이버전스 발견: 현재 봉에서 lookbackRight 만큼 좌측.") alertcondition(bearCond, title="MACD Regular Bearish Divergence", message="MACD 역배 다이버전스 발견: 현재 봉에서 lookbackRight 만큼 좌측.")
Pine Script® indicator
by Donggrimon
[Backtest Crypto] Cross MAThis script is designed for testing the moving average crossover strategy. Script settings: Select testing range Indicator settings: Select moving average type (EMA, SMA, WMA, SMMA, HMA) and period Trade management: Select risk-to-reward ratio, stop-loss defined as min/max for a certain number of candles (you can set a desired number), option to partially lock in a position by moving the stop-loss to breakeven, trailing stop, or close a position on an opposite signal. Option to limit the stop-loss by ATR to prevent it from becoming too large during volatile movements. =============================================================== Скрипт предназначен для тестирования стратегии пересечение скользящих средних. Настройки скрипта: Выбор диапазона тестирования Настройки индикатора: выбор типа скользящей (EMA, SMA, WMA, SMMA, HMA) и периода Сопровождение сделки: выбор соотношения риска к прибыли, стоп-лосс определяется как мин/мах за определенное количество свечей (можно устанавливать желаемое количество), возможность частичной фиксации позиции с переносом стоп-лосса в безубыток, трейлинг-стоп, или закрытие позиции по противоположному сигналу. Возможность ограничения стоп-лосса по ATR, чтобы при волатильных движениях он не был слишком большим.
Pine Script® strategy
by Backtest_Crypto
SMC Market Structure with EMA Confirmation and Prepare EntryDewaSMC v1 — Smart Market Structure with Prepare Entry & EMA Confirmation DewaSMC v1 is a technical analysis indicator based on market structure concepts, designed to help traders visually analyze price behavior in a structured and objective way. This indicator focuses on identifying structural changes in the market and highlighting areas of interest where price reactions may occur. It is intended as an analytical support tool, not as an automated trading system or a signal service 🔹 Key Features 1. Market Structure Detection (BOS & CHoCH) • Identifies Break of Structure (BOS) and Change of Character (CHoCH) using swing high and swing low analysis. • Break confirmation can be configured to use candle body or wick. • Structure levels are visualized with lines and clear BOS / CHoCH labels directly on the chart. 2. Prepare Entry Zones • Displays prepare entry zones when price approaches an important structure level but has not yet confirmed a break. • These zones help users monitor potential setups without entering prematurely. • Prepare zones are temporary and automatically disappear after a defined number of bars or once a structure break occurs. 3. EMA Confirmation Filter • Uses short-term and long-term EMAs as directional filters. • Optional confirmation modes: o Price relative to EMA o EMA alignment (short EMA above/below long EMA) • This filter is designed to reduce counter-structure or counter-trend scenarios. 4. Volatility-Based Target Projection • After a confirmed structure break, the indicator projects: o Entry level o Stop Loss level o Multiple target levels (TP1, TP2, TP3) • Targets are calculated using ATR-based volatility logic, allowing adaptability to different market conditions. • Risk and reward areas are displayed as visual zones for clarity. 5. Trade Information Table • A real-time information table summarizes key analytical data, including: o Structural direction o Entry level o Stop Loss o Target levels o EMA confirmation status o Estimated Risk-to-Reward ratio • Table position is fully customizable on the chart. 6. Trend Visualization • Candles can be colored based on current market structure direction. • EMAs are plotted as additional trend references. ⚙️ Customizable Settings • Structure detection period • Break confirmation type (Body or Wick) • Enable / disable: o Prepare Entry zones o EMA confirmation o Trade information table o Trend-based candle coloring • Visual customization options for colors and layout 📌 Important Notes • This indicator does not provide financial advice and does not guarantee any specific outcome. • It should be used in combination with: o Personal risk management rules o Additional technical or contextual analysis • All trading decisions remain the responsibility of the user. 🎯 Suitable For • Traders studying market structure or Smart Money–style concepts • Manual analysis on various instruments and timeframes • Users seeking a structured and visual approach to price analysis
Pine Script® indicator
by yohanespsihombing3
1
MA Crossovers (EMA + SMA)A versatile Moving Average tool designed to spot trends using a hybrid EMA/SMA setup. It provides clear visual signals and an on-chart trade simulator to track potential performance. Features: Hybrid Setup: Combines a fast EMA (Length 9) with three SMAs (50, 100, 150) for balanced trend detection. 4 Crossover Alerts: Monitors up to 4 different crossover pairs simultaneously with customizable markers. Visual P&L Simulator: Automatically draws entry/exit lines and calculates Profit/Loss percentages for the primary crossover, helping you visualize trade potential. Price Labels: Displays the exact price at every crossover point for precision. Fully Customizable: extensive control over colors, opacity, line widths, and label positioning to keep your chart clean.
Pine Script® indicator
by dardarul
Rainbow MA Width█ OVERVIEW Rainbow MA Width is a companion indicator for Rainbow MA Cloud. It displays ribbon width as a normalized Z-Score, allowing traders to visualize trend momentum expansion and contraction relative to recent history. █ CONCEPTS Z-Score Normalization: Rather than displaying raw width values (which vary by asset and timeframe), this indicator normalizes the ribbon width using Z-Score calculation: Z-Score = (Current Width - Average Width) / Standard Deviation Z-Score Interpretation: • 0 = Average width (mean) • +1 to +2 = Expanding (above average, strong trend) • -1 to -2 = Contracting (below average, weakening trend) • Beyond ±2 = Extreme (statistical outlier, potential reversal) Width Calculation Modes: • Outer — Distance between fastest and slowest MA: |MA1 - MA8| • Average Gap — Mean of all adjacent MA gaps • Total Gap — Sum of all adjacent MA gaps █ FEATURES 1 — Width Mode Selection Three methods to calculate ribbon width. "Outer" recommended for aligned trends. 2 — Z-Score Period Configurable lookback for mean and standard deviation. Default 20 bars; increase for smoother, less reactive readings. 3 — Zone Fill Coloring Cyan fill when expanding (Z > 0). Orange fill when contracting (Z < 0). Yellow fill for extreme values (|Z| > 2) as warning. 4 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Synced with Rainbow MA Cloud for consistency. 5 — Reference Lines Horizontal lines at 0 (mean), ±1σ, and ±2σ levels. Provides clear visual boundaries for interpretation. 6 — Raw Width Display Optional secondary line showing original width percentage. Useful for comparing normalized vs absolute values. █ HOW TO USE Trend Confirmation: • Z-Score rising above 0 confirms trend acceleration • Z-Score staying above +1 indicates sustained strong momentum • Use alongside alignment background for confluence Reversal Warning: • Z-Score exceeding +2 suggests overextension (yellow warning zone) • Z-Score dropping below -2 indicates extreme contraction • Extreme readings often precede trend reversals or consolidation Entry Timing: • Enter trends when Z-Score crosses above 0 (expansion beginning) • Avoid entries when Z-Score is at extreme highs (potential exhaustion) • Consider exits when Z-Score peaks and begins declining █ LIMITATIONS • Z-Score is relative to lookback period; different periods give different readings • Extreme zones (±2) are statistical guides, not guarantees • Best used in conjunction with Rainbow MA Cloud for full context █ ALERTS Four built-in alert conditions: • Z-Score crosses above/below zero • Z-Score enters extreme high/low zones (±2)
Pine Script® indicator
by viva_lee
Rainbow MA Cloud█ OVERVIEW Rainbow MA Cloud displays 8 Moving Averages as a gradient-colored cloud to visualize trend direction and strength. The "rainbow" effect shows momentum through ribbon width, while perfect MA alignment signals strong trending conditions. █ CONCEPTS The indicator uses 8 MAs with Fibonacci-based default lengths (8, 13, 21, 34, 55, 89, 144, 233) to create a layered view of price momentum across multiple timeframes. Perfect Alignment Detection: • Bullish Alignment — All 8 MAs in ascending order (MA1 > MA2 > ... > MA8) Indicates strong uptrend with momentum across all timeframes • Bearish Alignment — All 8 MAs in descending order (MA1 < MA2 < ... < MA8) Indicates strong downtrend with aligned selling pressure • Mixed — MAs are not in sequential order, suggesting consolidation or transition Ribbon Width: • Widening ribbon = Trend acceleration, increasing momentum • Narrowing ribbon = Trend weakening, potential reversal or consolidation █ FEATURES 1 — MA Configuration Choose from EMA, SMA, WMA, VWMA, or HMA calculation methods. All 8 MA lengths are fully customizable. 2 — Color Themes Five built-in themes: Rainbow, Warm, Cool, Neon, Mono. Creates visually distinct gradient from fast to slow MAs. 3 — Alignment Background Green background during bullish alignment. Red background during bearish alignment. Helps quickly identify strong trending periods. 4 — Trend Signals Labels appear when perfect alignment forms. "BULL ALIGN" for bullish, "BEAR ALIGN" for bearish. 5 — Information Panel Real-time display of alignment status, trend strength percentage, ribbon width, price position relative to cloud, and MA values. █ HOW TO USE Entry Signals: • Look for alignment signals (BULL/BEAR ALIGN) as trend confirmation • Enter long when bullish alignment forms with price above cloud • Enter short when bearish alignment forms with price below cloud Trend Following: • Stay in position while alignment background color persists • Widening ribbon confirms trend continuation • Exit or reduce when alignment breaks (background disappears) Support/Resistance: • Cloud edges act as dynamic support (bullish) or resistance (bearish) • Price entering cloud suggests consolidation or potential reversal █ LIMITATIONS • Alignment signals are lagging by nature (based on MA crossovers) • Works best on trending markets; generates mixed signals during ranging periods • Ribbon width measurement uses outer MAs only (MA1 vs MA8) █ COMPANION INDICATOR Use "Rainbow MA Width" indicator for detailed Z-Score analysis of ribbon expansion/contraction patterns.
Pine Script® indicator
by viva_lee
Momentum Turtle Swing StrategyMomentum Breakout Swing Tool — Overview This indicator is built for traders who like breakout-style swing entries with a simple, disciplined structure. It blends trend context + momentum confirmation to highlight moments when price is more likely to continue rather than chop. Core idea Focus on directional expansion: it looks for points where price starts moving decisively after a period of structure building. Signals are filtered so they appear primarily when the market is showing a clear directional bias, not when it’s indecisive. Confirmation concept Uses a trend context filter to stay aligned with the dominant market direction. Adds a momentum sanity check so signals are less likely to trigger when strength is fading. Position logic (unique signals) Designed to keep signals clean and non-spammy: it produces distinct entry markers instead of repeated triggers in the same direction. The internal flow treats market states as “in-trade / out-of-trade” to keep the chart readable. Exit philosophy Exits are based on a reactive market reference (to adapt when momentum cools or structure shifts), rather than fixed targets. The goal is to stay in the move while it’s healthy and step aside when conditions degrade. Best conditions Works best in markets with clear swings and breakout continuation behavior. Less effective in tight ranges or noisy sideways phases, where breakouts can fail more often. For educational and analytical purposes only. Always forward-test on different markets and timeframes.
Pine Script® indicator
by alblanz