Fast EMA Stack >XBT<Multi-timeframe EMA indicator displaying 9/20 EMA bands across 5M, 15M, 1H, and 4H timeframes simultaneously on a single chart.
Quickly assess trend alignment across multiple timeframes without switching charts. A built-in signal table provides instant visual confirmation of bullish or bearish conditions on each timeframe.
Features:
Multi-Timeframe Bands — View EMA 9/20 bands for 5M, 15M, 1H, and 4H all at once
Crossover Labels — Bull/Bear labels appear directly on the chart at each EMA crossover point
Stack Filter — Only show crossover signals that align with your higher timeframe bias (e.g. if 1H is bullish, only show bull signals on lower timeframes)
Individual Label Controls — Toggle crossover labels on/off independently for each timeframe
Label Limit — Set maximum labels per timeframe to keep charts clean (default 5)
Signal Table — Dark-mode table showing BULL/BEAR status with colour-coded indicators
Fully Customisable — Adjust EMA lengths, line thickness, colours, and band transparency per timeframe
Toggle Timeframes — Show or hide individual timeframe bands
Alert Conditions — Pre-built alerts for bullish and bearish EMA crossovers on all four timeframes
How to Use:
Look for alignment across timeframes to confirm trend direction. When multiple timeframes show the same signal (all green or all red), you have stronger confluence. Crossover labels mark exact entry/exit points where momentum shifts.
Stack Filter:
Enable the Stack Filter to only see signals that match your higher timeframe bias. Select your bias timeframe (15M, 1H, or 4H), then:
When bias is bullish → only bull crossovers appear on lower timeframes
When bias is bearish → only bear crossovers appear on lower timeframes
The bias timeframe always shows both directions so you can see when trend changes
This helps filter out counter-trend noise and keeps you trading with the flow.
Green = Bullish (EMA 9 above EMA 20)
Red = Bearish (EMA 9 below EMA 20)
Moving Averages
Blockcircle Global Central Bank Balance Sheet and Money SupplyOVERVIEW
This indicator aggregates money supply (M2) and central bank balance sheet data from the world's largest economies into a single, unified view of global liquidity conditions. Rather than manually tracking dozens of separate data feeds or building your own aggregation logic, you get a ready-to-use tool that pulls from FRED, TradingView Economics, and real-time FX rates to convert everything into USD terms automatically.
Global liquidity has historically served as a leading indicator for risk assets. When central banks expand their balance sheets and the money supply grows, capital tends to flow into equities, crypto, and other risk-on assets. When liquidity contracts, markets often follow. This indicator gives you that macro context directly on your chart.
The global liquidity movement (expansionary or contractionary) often leads to asset price appreciation/depreciation in CRYPTOCAP:BTC , SP:SPX , etc
WHAT MAKES IT ORIGINAL AND DIFFERENT
Combines both M2 money supply AND central bank balance sheet data in one place, whereas most existing tools focus on only one metric
Aggregates 11 economies for M2 (USA, EU, China, Japan, UK, Canada, India, Russia, Brazil, Australia, Switzerland) and 10 central banks for balance sheet data
Automatically handles currency conversion using live FX rates so all values display in USD
Includes a dedicated US Net Liquidity calculation (Fed Balance Sheet minus Reverse Repo minus TGA) which filters out temporary distortions that other aggregate tools ignore
Provides granular country by country breakdown in the information table so you can identify which central banks are driving the aggregate trend
Offers four moving average types (SMA, EMA, WMA, RMA) for trend smoothing with configurable length
HOW IT WORKS
The indicator requests monthly M2 data from TradingView's Economics feeds for each included country. Central bank balance sheet data is pulled the same way. All non-USD values are converted using daily FX rates from major currency pairs. The script then sums these converted values to produce the Global M2 and Global CBBS lines.
For US liquidity specifically, the script pulls weekly data for the Reverse Repo Program (RRP) and Treasury General Account (TGA) from FRED. Net Liquidity is calculated as: Fed Balance Sheet minus RRP minus TGA. This formula removes funds parked in reverse repos and Treasury cash balances, showing what is actually circulating in the financial system.
KEY FEATURES
Global M2 Money Supply line tracking 11 major economies with individual toggles for each country
Global Central Bank Balance Sheet line tracking 10 central banks with individual toggles
US-specific components, including Reverse Repo, TGA, and Net Liquidity as separate plot lines
Moving average overlays with selectable type and length for identifying trend direction
Fill the option between M2 and CBBS lines to visualize the gap between money supply and central bank assets
Value labels at line endpoints showing current readings and period-over-period percentage change
Comprehensive information table with optional country breakdown view
Full color customization for all lines, configurable line width, and style options
Alert conditions for significant M2 and CBBS changes plus MA crossover signals
HOW TO USE
Add to any chart and observe the overall direction of global liquidity. Rising lines generally support risk on positioning, while declining lines suggest caution
Watch for divergences between the M2 and CBBS lines. If money supply grows faster than central bank assets, private credit may be expanding. If CBBS rises faster, central banks are actively injecting liquidity
Use the US Net Liquidity line to understand short term dollar liquidity conditions separate from longer term global trends
Enable moving averages to filter noise and identify when liquidity trends are changing direction
Toggle individual countries on or off in the settings to see how specific regions contribute to the total
Reference the information table for exact values and percentage changes without leaving your chart
SETTINGS BREAKDOWN
Table Settings: position, text size, and whether to show the country breakdown
Display Settings: toggle visibility for each line, fill area, value labels, percent labels, and the info table
Line Styling: customize colors for each metric, adjust line width, and select solid, dashed, or dotted style
Moving Average: enable or disable MA overlays for M2 and CBBS, select MA type, and set length
Global M2 Countries: individually enable or disable each of the 11 economies
US Liquidity Components: toggle RRP and TGA data
Global CBBS Countries: individually enable or disable each of the 10 central banks
Alerts: set percentage threshold for change based alerts
IMPORTANT CONSIDERATIONS
Data updates depend on the publication schedule of each source. M2 and CBBS data are typically monthly with some delay. US Fed Balance Sheet, US RRP and US TGA update weekly
FX conversion uses daily close rates which may introduce minor discrepancies during volatile currency periods
Some emerging market data may have longer reporting lags than developed market data
Hope you find it useful and impactful to your trading and investment decisions! If you have any questions at all, please just ask, happy to help
Luminous Volume Flow [Pineify]Luminous Volume Flow
The Luminous Volume Flow is a specialized volume-based momentum oscillator designed to uncover the underlying buying and selling pressure within the market. Unlike traditional volume indicators that simply aggregate volume based on the close relative to the open, LVF analyzes intrabar dynamics—specifically the relationship between the close price and the high/low wicks—to estimate the dominance of buyers or sellers.
By smoothing this raw volume delta and applying a signal line, the LVF provides a clear visual representation of volume flow, helping traders identify trend strength, potential reversals, and momentum shifts with high-definition "luminous" visuals.
Key Features
Intrabar Pressure Analysis : Calculates buying and selling pressure based on wick dynamics and price polarity to provide a more granular view of market sentiment.
Multi-Type Smoothing : Offers selectable Moving Average types (SMA, EMA, RMA) for the main Flow Line to adapt to different market volatilities.
Luminous Visuals : Utilizes dynamic color gradients that brighten as momentum expands and darken as it contracts, offering immediate visual feedback on trend intensity.
Sentiment Cloud : Fills the area between the Flow and Signal lines to clearly visualize the prevailing bullish or bearish sentiment.
High-Contrast Signals : Optional high-contrast signal markers for clear crossover identification.
How It Works
The LVF operates on a multi-stage calculation process:
Pressure Calculation : The script compares the lower wick (Close - Low) against the upper wick (High - Close).
If the lower wick is longer, it suggests buying pressure (rejection of lower prices), and volume is assigned to Buy Pressure .
If the upper wick is longer, it suggests selling pressure (rejection of higher prices), and volume is assigned to Sell Pressure .
If equal, the Close > Open polarity is used as a tie-breaker.
Raw Delta : The difference between Buy and Sell Pressure is calculated to determine the net volume flow for the bar.
Flow Line : The Raw Delta is smoothed using a user-selected Moving Average (SMA, EMA, or RMA) over the Flow Length period. This creates the main oscillator line.
Signal Line : An EMA of the Flow Line is calculated to generate the Signal Line, similar to the MACD mechanic.
Histogram : The difference between the Flow Line and Signal Line determines the Histogram, which drives the "Luminous" color gradient logic.
Trading Ideas and Insights
Trend Confirmation : When the Flow Line is above the Signal Line and the Cloud is green, the bullish trend is supported by volume. Conversely, a red cloud indicates bearish volume dominance.
Momentum Crossovers : The triangle shapes indicate crossovers between the Flow and Signal lines. A triangle up (Green) suggests a potential bullish entry or invalidation of a short bias. A triangle down (Red) suggests a bearish turn.
Expansion vs. Contraction : Pay attention to the brightness of the histogram columns. Bright colors indicate expanding momentum (a strong move), while darker, fading colors suggest the move is losing steam, potentially preceding a consolidation or reversal.
How multiple components work together
This script combines the logic of Volume Delta analysis with Signal Line Crossover mechanics (popularized by MACD). By applying trend-following smoothing to raw volume data, we transform erratic volume spikes into a coherent flow. The "Luminous" visual layer is added to make the data interpretation intuitive—removing the need to mentally calculate the rate of change based on histogram height alone.
Unique Aspects
Adaptive Gradient Coloring : The histogram doesn't just show positive/negative values; it visually communicates the *acceleration* of the move via color intensity based on standard deviation.
Wick-Based Volume Attribution : Instead of a binary close-to-open comparison, LVF respects the price action within the candle (the wicks), acknowledging that a long lower wick on a red candle can actually represent significant buying interest.
How to Use
Add the indicator to your chart.
Adjust the Flow Length to match your trading timeframe (lower for scalping, higher for swing trading).
Select your preferred Smoothing Type (EMA is default and recommended for responsiveness).
Use the "Sentiment Cloud" filter: Look for long signals only when the cloud is green, and short signals when the cloud is red.
Monitor the Luminous Histogram for signs of exhaustion (colors fading) to manage exits.
Customization
Flow Length : Period for the main smoothing (Default: 14).
Signal Length : Period for the signal line (Default: 9).
Smoothing Type : Choose between SMA, EMA, or RMA.
Colors : Fully customizable colors for Bullish/Bearish phases and signals.
Chart Bars : Option to color the main chart candles based on the Flow direction.
Conclusion
The Luminous Volume Flow is a robust tool for traders who want to go beyond price action and understand the volume dynamics driving the market. By visualizing the flow of buying and selling pressure with advanced smoothing and reactive visuals, it provides a clearer picture of market sentiment than standard volume bars.
EMA Pullback StrategyEMA Pullback Scalping – HTF ADX & MA Spread Filter
This strategy is designed for trend-based scalping and intraday trading, with a strong focus on filtering out choppy market conditions.
The core idea is simple:
trade pullbacks inside a clean trend, and avoid entries when the market lacks structure or momentum.
⸻
🔹 Core Logic
• Trend definition
• The main trend is defined using EMA 50 on the base timeframe.
• Long trades are considered only when price is above EMA 50 and EMA 9 > EMA 21.
• Short trades are considered only when price is below EMA 50 and EMA 9 < EMA 21.
• Pullback entry
• Entries are triggered on pullbacks toward EMA 21, followed by price strength in the direction of the trend.
• This avoids chasing breakouts and focuses on higher-probability continuation entries.
⸻
🔹 Market Regime Filters
To avoid overtrading during ranges and low-quality conditions, several filters are applied:
• Higher-Timeframe ADX (x3 timeframe)
• Ensures the broader market structure has enough directional strength.
• An optional adaptive threshold can be used instead of a fixed ADX value.
• EMA Spread Filter (base timeframe)
• Requires a minimum separation between EMA 21 and EMA 50.
• This prevents trading when EMAs are compressed and price action is choppy.
• The spread can be measured either as:
• a percentage of price, or
• a multiple of ATR (recommended).
This combination makes the strategy far more selective and helps keep trades aligned with genuine trends rather than noise.
⸻
🔹 Risk Management
• Position size is calculated based on a fixed risk percentage of equity.
• Stop loss and take profit are defined in percentages.
• An optional delayed trailing stop can be enabled:
• The trailing stop only activates once price has moved favorably by a user-defined amount.
• This helps protect profits without cutting strong trends too early.
⸻
🔹 Best Use Cases
• Works best on BTC perpetuals and other highly liquid markets.
• Particularly suited for 15m and 4H timeframes, but adaptable to lower timeframes with tighter filters.
• Designed for trending environments, not range-bound markets.
[X342] Volume Insight Volume Insight — Smart Flow Analysis
OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Volume Insight is a comprehensive volume analysis indicator that helps identify unusual trading activity and momentum shifts through smart volume classification.
METHODOLOGY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The indicator employs a multi-layered volume analysis approach:
1. Volume Classification
- Compares current volume to moving average
- Identifies "high volume" bars using configurable multiplier
- Color-codes bars by direction (bullish/bearish) and intensity
2. Moving Average Options
- SMA: Simple Moving Average (equal weight)
- EMA: Exponential Moving Average (recent bias)
- WMA: Weighted Moving Average (linear weight)
- RMA: Running Moving Average (smoothed)
- HMA: Hull Moving Average (responsive, less lag)
3. Daily Context
- Fetches daily timeframe volume data
- Compares today vs yesterday volume
- Calculates percentage change for trend context
VISUAL ELEMENTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Volume Bars: Colored by direction and high-volume status
- Green: Bullish volume (close > open)
- Red: Bearish volume (close < open)
- Gold: High volume (exceeds threshold)
• MA Line: Blue line showing average volume
• Threshold Line: Gold step-line showing high volume trigger level
FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✓ Dual language support (English / Türkçe)
✓ Multiple MA type options
✓ Configurable high volume detection
✓ Daily volume comparison
✓ Comprehensive info panel
✓ Alert conditions for volume spikes
SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Display:
- Show Volume Bars: Toggle bar display
- Show Moving Average: Toggle MA line
- Show High Volume Threshold: Toggle threshold line
Moving Average:
- MA Period: Lookback period (default: 20)
- MA Type: SMA/EMA/WMA/RMA/HMA
Detection:
- High Volume Multiplier: Threshold multiplier (default: 1.5x)
Panel:
- Show Info Panel: Toggle dashboard
- Panel Position: Corner selection
INFO PANEL
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Displays:
- Current volume value and status
- Average volume over selected period
- Volume ratio (current / average)
- Today's total volume
- Yesterday's total volume
- Daily change percentage
ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• High Bullish Volume: Above threshold + green bar
• High Bearish Volume: Above threshold + red bar
• Volume Spike: 2x+ average volume detected
BEST PRACTICES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- High volume on breakouts confirms the move
- Declining volume on rallies warns of exhaustion
- Volume spikes near support/resistance are significant
- Combine with price action for best results
[X342] Market Radar Market Radar — Multi-Indicator Dashboard
OVERVIEW
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Market Radar is a comprehensive dashboard that consolidates 19+ technical indicators into a single, easy-to-read panel with automatic scoring and decision signals.
METHODOLOGY
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The indicator combines multiple technical analysis approaches:
1. Trend Indicators (7 total)
- EMA 14, 21, 34 (short-term trend)
- SMA 50, 200 (long-term trend)
- SuperTrend (ATR-based)
- Parabolic SAR
- Ichimoku Cloud
2. Oscillators (7 total)
- RSI (14) - momentum
- MACD - trend momentum
- Stochastic - overbought/oversold
- ADX - trend strength
- ROC - rate of change
- Williams %R - momentum
- RVOL - relative volume
3. Pivot Levels (3 timeframes)
- Daily Pivot
- Weekly Pivot
- Monthly Pivot
4. Special Indicators
- Fibonacci retracements (auto-drawn)
- AVWAP (monthly)
- Squeeze detection (BB inside KC)
- Composite analysis (E34, E233)
SCORING SYSTEM
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Each indicator contributes to the total score (max 19 points):
- Score ≥ 10: BUY signal
- Score 7-9: NEUTRAL
- Score ≤ 6: SELL signal
Strong signals: ≥14 (Strong Buy) or ≤4 (Strong Sell)
FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
✓ Dual language support (English / Türkçe)
✓ 19-point scoring system
✓ Auto-drawn Fibonacci levels
✓ Squeeze detection
✓ Composite EMA analysis
✓ Color-coded indicators
DASHBOARD LAYOUT
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
6 columns × 11 rows organized by category:
Column 1-2: Trend indicators and values
Column 3-4: Oscillators and values
Column 5-6: Pivots, special, score, decision
SETTINGS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Fibonacci:
- Show Fibonacci: Toggle Fib levels
- Fibonacci Lookback: Period for high/low (default: 100)
Dashboard:
- Show Dashboard: Toggle panel
- Position: Corner selection
Colors:
- Bullish Color: Green for positive signals
- Bearish Color: Red for negative signals
- Neutral Color: Gray for neutral
ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Strong Buy Signal: Score ≥ 14
• Strong Sell Signal: Score ≤ 4
• Squeeze Detected: Volatility compression
BEST PRACTICES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- Use for quick market overview
- Higher scores on higher timeframes = stronger signals
- Combine with price action confirmation
- Watch for squeeze as potential breakout setup
- Score changes can indicate trend shifts
Ultimate Trend Dashboard [Multi-Timeframe]This is a Universal Market Scanner designed for Crypto, Forex, and Metals (Gold/Silver). Instead of checking multiple charts one by one, this dashboard monitors 4 different timeframes instantly from a single screen.
### 🧠 How It Works ( The Logic) The system uses a "Double Confirmation" strategy to determine the true trend direction: 1. Supertrend: Checks if the momentum is Bullish or Bearish. 2. EMA 200 Filter: Checks if the price is above or below the 200-period Exponential Moving Average (The most important long-term trend line).
A signal is only generated if BOTH indicators agree.
### 📊 Dashboard Overview The panel on the screen scans the following timeframes (Adjustable in settings): * 15 Minutes (Scalping Trend) * 1 Hour (Intraday Trend) * 4 Hours (Swing Trend) * Daily (Major Trend)
### 🚦 How to Use (Step-by-Step)
1. Look at the "TOTAL" Row: The script calculates a score based on all timeframes.
2. STRONG BUY 🚀 (All Green): * Meaning: All timeframes (Short & Long term) are Bullish. * Action: Look for Long entries. Do not Short.
3. STRONG SELL 🔻 (All Red): * Meaning: All timeframes are Bearish. * Action: Look for Short entries. Do not Buy.
4. NEUTRAL ⚠️ (Mixed Colors): * Meaning: The market is confused (e.g., Daily is Bullish but 15min is Bearish). * Action: Wait. Do not force a trade until the trend aligns.
### ⚙️ Customization * You can change the Timeframes (e.g., set them to 5m, 15m, 1h, 4h) in the settings. * You can move the table position (Right, Left, Center) to fit your screen. * Works on ANY asset class (BTC, ETH, XAUUSD, EURUSD, Stocks).
Triple SMMA 11-21Is Script ki Khoobiyan:
Custom Inputs: Aap indicator ki settings mein jaakar 11 aur 21 ki jagah koi bhi number daal sakte hain bina code chhede.
Visual Crossover: Jab 11-period SMMA (Blue) 21-period SMMA (Red) ko upar ki taraf cross karega, to chart par ek Green Triangle dikhega.
Smoothing: SMMA normal Moving Average se zyada "smooth" hota hai, isliye ye noise ko kam karta hai.
Fixed Timeframe SMMA: Isme Orange rang ki ek moti line (linewidth 3) dikhegi. Ye hamesha 15 minute ka SMMA 21 calculate karegi.
Visual Clarity: * Blue: SMMA 11 (Aapke current chart ka)
Red: SMMA 21 (Aapke current chart ka)
Orange (Moti Line): SMMA 21 (Sirf 15-Minute chart ka)
Ek Zaruri Baat:
Jab aap 15-minute se bade timeframe par honge (jaise 1-hour ya Daily), toh 15-min ki line thodi "zigzag" ya seedhi dikh sakti hai kyunki bade timeframe ke ek candle mein 15-min ki kai candles hoti hain. Ye bilkul normal hai.
Multi-Timeframe Moving Average Tracker
Tracks user-defined higher timeframe moving averages on a 1-min chart (maybe higher?).
Useful to see where current price is in relation to a higher timeframe (e.g., 5-min, 1-hr) moving average like the 50 period. This allows the trader to determine size position risk based on personal rules (e.g., price below the 1-hr 40p EMA is high risk for lower price, so position size needs to be lightened, etc).
The higher timeframe moving average is live and plotted on the lower chart as a line (user-defined type and color) with the timeframe and period noted. It will move as the period closes (i.e., 5-min period closes every 5 minutes, 1-hr period closes every 60 minutes, etc.).
Koko's Capital Flow Channel Koko’s Capital Flow Channel is a structured EMA channel system designed to reduce over-trading and eliminate chase entries. It separates Early Direction signals (clearing bars) from Smart Entries (inside-channel confirmations), helping traders execute with patience and clarity.
Koko’s Capital Flow Channel™ provides a clean, psychology-friendly framework for traders transitioning from fast scalping to higher timeframes.
What it does
This indicator uses an EMA-based channel to define structure and trend flow, then delivers two tiers of signals:
Early Direction Signals (Early BUY / Early SELL)
Trigger on a clearing bar (break/close condition depending on your setting)
Used for directional awareness and early positioning
Smart Entry Signals (BUY-S / SELL-S)
Trigger only when price returns inside the channel and prints a qualifying candle
Designed to reduce impulsive entries and improve execution quality
Why it’s different
Many tools fire signals everywhere. This channel is built to create clarity and restraint:
Less noise
Fewer, higher-quality signals
Built-in structure + intent filters
Optional ATR filtering to avoid low-quality breaks
Best use cases
Daily / swing trading
Trend continuation and pullback entries
Traders learning discipline and consistency
Burned-out scalpers who want calmer, higher-quality setups
Recommended settings
Timeframe: Daily (works on others but Daily is the intended home)
Start with:
Clearing Bar Mode: Cross (or Over/Under “event” logic if enabled)
Candle Body: Body Only
Intent: Bullish/Bearish Candle
ATR Filter: Clearing Bar Strength, ATR(14), Multiplier 1.0
Signal Key
BUY-E / SELL-E = Early Direction signal (clearing bar)
BUY-S / SELL-S = Smart Entry signal (inside-channel confirmation)
5) How to Use It (simple instructions section)
Workflow
Wait for Early BUY-E / SELL-E to confirm flow direction
Only take Smart Entries (BUY-S / SELL-S) when price returns inside the channel
Use the channel boundaries for structure (helps avoid chasing)
Alerts
You can create alerts for:
Early BUY / Early SELL
Smart BUY / Smart SELL
Risk Disclaimer (safe + standard)
Disclaimer: This indicator is for educational and informational purposes only and is not financial advice. Markets involve risk. Always manage risk appropriately and test settings before live use.
StealthFX Signals NavigatorThe StealthFX Signals Navigator is a high-performance trend-following suite designed for traders who demand institutional-grade clarity without the clutter. Inspired by the sleek aesthetics of premium toolkits like LuxAlgo, this indicator strips away the noise to provide a singular, high-probability "path of least resistance" for your trades.
🛡️ The Core Philosophy: "Trade with the Giant"
Most retail traders fail because they fight the primary trend. The Navigator solves this by using a 200-period EMA Filter.
Blue Signals (BUY): Only occur when price action is confirmed above the 200 EMA.
Purple Signals (SELL): Only occur when price action is confirmed below the 200 EMA.
🎯 Precision Entry & Risk Management
Stop guessing where to exit. The Navigator uses a volatility-adjusted ATR engine to calculate your targets the moment a signal prints.
Pip-Clamped Logic: To ensure trades remain realistic, the script automatically clamps your Stop Loss between 30 and 100 pips (with a hard safety cap at 200), making it ideal for Forex and Indices.
1:2 Risk-Reward: Every signal aims for a mathematical edge, setting a Take Profit (Blue Line) that is double the distance of your Stop Loss (Purple Line).
🧹 The "Clean Chart" Evolution
We believe a cluttered chart leads to a cluttered mind.
Smart-Hiding: Unlike standard indicators that leave old lines everywhere, the Navigator tracks price in real-time. The moment your TP or SL is touched, the lines vanish.
Signal Priority: The script resets with every new momentum shift, ensuring you are always looking at the most relevant trade setup.
🚀 Key Features
Modern Aesthetic: A sleek Neon Blue & Deep Purple theme designed for dark-mode enthusiasts.
Universal Scaling: Works across Forex, Crypto, and Stocks thanks to its "Mintick" sensitive calculation engine.
Zero Repaint: Signals confirm on the close of the bar, providing stable historical data for backtesting.
Integrated Alerts: Set-and-forget notifications for both Buy and Sell entries.
📈 How to Use
Identify the Bias: Watch the gray 200 EMA.
Execute: When a label appears, immediately set your limit orders at the displayed Blue (TP) and Purple (SL) levels.
Patience: Let the trade run. The lines will disappear automatically once the outcome is decided.
Best Timeframes: 15m, 1h, 4h. Best Assets: Major FX Pairs (EURUSD, GBPUSD), Gold (XAUUSD), and US Tech Indices.
(Free Version) StealthFX Signals Indicator (FX/XAU/BTC)StealthFX Signals is a clean, rule-based trading indicator designed to deliver high-quality, low-noise buy and sell signals across Forex, Gold (XAUUSD), and Bitcoin.
The indicator focuses on trend alignment, market strength, and volatility filtering, avoiding overtrading and low-probability setups. All signals are non-repainting and confirmed on candle close.
🔹 Core Logic
StealthFX only generates signals when multiple conditions align:
Primary trend direction using a 200 EMA
Higher-timeframe trend bias (optional)
Supertrend confirmation (optional)
RSI momentum confirmation
ADX strength filter to avoid choppy markets
ATR volatility filter
Cooldown system to prevent signal clustering
Berlin session no-trade window (23:00–01:00) to avoid low-liquidity noise
🔹 Risk Management
Automatic Stop Loss & Take Profit on every signal
Default 1:1 Risk-to-Reward
SL distance adapts automatically per market:
Forex
XAUUSD
Bitcoin
TP (green) & SL (red) lines plotted directly on the chart with exact price labels
🔹 Visuals
Clean, uncluttered chart design
Large, clear BUY / SELL arrows
Optional trend EMA display
Optional TP/SL level visualization
Designed to feel familiar to users of professional Lux-style indicators
🔹 Markets & Timeframes
Forex: best on 15m – 1H
XAUUSD: best on 5m – 15m
Bitcoin: best on 15m – 1H
🔹 Who It’s For
Traders who want fewer but higher-quality signals
Users who prefer confirmation-based, non-repainting logic
Traders who value clarity, structure, and risk control over signal spam
⚠️ This indicator is a technical analysis tool and does not constitute financial advice. Always manage risk appropriately.
AI Indicator EMA big moveThe Institutional big move+ big move + Target indicator is designed to help trader identify high probabilty breakout,
EMA-SMA Moving Average Cloud v2EMA-SMA Moving Average Cloud v2
A versatile moving average indicator featuring two operating modes: Simple Mode for quick setups with preset length combinations, and Multi-MA Mode for advanced configurations with up to 5 customizable moving averages.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
FEATURES
▸ Unified MA Type Selection
Choose between EMA or SMA - the selected type applies consistently across all moving averages in both modes.
▸ Simple Mode (Default)
Perfect for traders who prefer classic dual-MA setups:
• Preset length combinations: 9/21, 21/50, 50/200, 10/20, 20/50, 8/21, 13/48, 5/13
• Option to define custom fast/slow lengths
• Visual cloud between the two MAs showing trend direction
• Automatic buy/sell signals on crossovers
▸ Multi-MA Mode
For traders requiring more comprehensive analysis:
• Up to 5 independently configurable moving averages
• Individual control over length, color, and line width for each MA
• Flexible cloud pairing - choose any two MAs to form the cloud
• Signals generated based on selected cloud pair crossovers
▸ Dynamic Cloud Visualization
• Color-coded trend identification (green for bullish, red for bearish)
• Adjustable transparency
• Cloud automatically reflects the relationship between selected MAs
▸ Cross Signals & Labels
• Triangle markers on MA crossovers
• Optional buy/sell labels
• Customizable signal colors
▸ Higher Timeframe Support
• Overlay HTF moving averages on your current chart
• Useful for multi-timeframe confluence analysis
▸ Info Panel
• Optional on-chart display showing current MA values, trend direction, and active settings
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
HOW TO USE
Simple Mode:
1. Select your preferred MA type (EMA/SMA)
2. Choose a preset or define custom fast/slow lengths
3. Use the cloud color to identify trend direction
4. Look for crossover signals for potential entries
Multi-MA Mode:
1. Enable "Multi-MA Mode" in Core Settings
2. Configure each MA (enable/disable, set length, choose color)
3. Select which MA pair should form the cloud
4. Monitor crossovers between your selected cloud pair for signals
Common Setups:
• Scalping: 9/21 EMA on lower timeframes
• Swing Trading: 21/50 or 50/200 on daily charts
• Trend Following: Multiple MAs (9, 21, 50, 100, 200) in Multi-MA mode
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
ALERTS
• Bullish Cross - Fast MA crosses above Slow MA
• Bearish Cross - Fast MA crosses below Slow MA
• Trend Turned Bullish - Trend shifts from bearish to bullish
• Trend Turned Bearish - Trend shifts from bullish to bearish
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
NOTES
• The cloud provides a visual representation of trend strength - wider clouds indicate stronger momentum
• In Multi-MA mode, signals are only generated when a cloud pair is selected (not "None")
• HTF overlay is available only in Simple Mode
• Works on all instruments and timeframes
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
If you find this indicator useful, please consider giving it a boost!
Feedback and suggestions are always welcome.
Fusion System | BUY/SELL + Auto FibonacciMariSakel – Fusion System | BUY / SELL Signals + Auto Fibonacci
Overview
MariSakel – Fusion System is a trend-following trading indicator that combines BUY / SELL signals, automatic Fibonacci levels, and Take Profit indications directly on the chart.
It is designed to help traders identify trend direction, entries, and exits without manual drawing.
BUY / SELL Signals
BUY signal appears when price shifts into a bullish trend and moves above the system’s dynamic trend line.
SELL signal appears when price shifts into a bearish trend and moves below the system’s dynamic trend line.
Signals are optimized to follow real trend changes, not random price noise.
Trend Visualization
Green candles indicate bullish market conditions
Red candles indicate bearish market conditions
This allows instant visual confirmation of the active trend, as shown in the chart.
Automatic Fibonacci Levels
The indicator automatically plots key Fibonacci retracement levels:
0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
These levels act as:
Support & resistance zones
Potential take profit targets
Reaction areas for price continuation or pullbacks
No manual Fibonacci drawing is required.
Take Profit Signals
Take Profit labels appear when price reaches areas of:
extended movement
overbought or oversold conditions
These signals are meant for exiting or partially closing positions, not for opening new trades.
How to Use
Follow the active trend (green for long, red for short)
Enter trades only in the direction of the BUY or SELL signal
Use Fibonacci levels and Take Profit labels to manage exits
Markets & T
Works on Crypto, Forex
Suitable for all t (best performance on H1 and higher)
Multi Indicator Screener w/ Gates by DeepsageDeepsage Weighted Screener w/ Gates is a high-frequency, candle-by-candle market screening tool designed for precision entries on the 1-minute timeframe (Settings are adjustable to fit other timeframes).
The screener aggregates 31 weighted technical indicators across trend, momentum, volatility, trend strength, and volume to evaluate market conditions at every candle close and classify directional bias.
To improve signal quality, the system includes three independent gate indicators that act as a confirmation layer. These gates do not influence the score itself but instead approve or block trade entry signals, helping filter out low-quality conditions while still allowing exit signals to function normally.
All indicator parameters and gate conditions are fully adjustable, allowing the screener to be adapted to different instruments, volatility regimes, and execution styles.
Custom EMA Ribbon Pro🌊 Custom EMA Ribbon Pro 🌊
The Ultimate Trend-Following System | Now with Dynamic Cloud Technology 🚀
Stop guessing the trend and start seeing it. The Custom EMA Ribbon Pro is a precision-engineered trading system that transforms standard moving averages into a vibrant, dynamic "Cloud." It is designed to filter out noise, visualize momentum, and help you catch massive trends on any timeframe. 🧘♂️✨
🌟 What makes this "Pro"?
This isn't just a set of lines—it’s a complete Visual Ecosystem.
We have upgraded the classic ribbon with a Dynamic Fill Algorithm that creates a glowing "Cloud" between the lines. This allows you to instantly gauge trend strength just by looking at the intensity of the color on your chart.
⚡ Key Features
🎀 8-Strand Precision: Uses 8 distinct EMAs, to show the full "Flow" of price action.
🌫️ Dynamic Cloud Fill: (NEW!) Toggleable background glow that fills the ribbon.
Green Glow: Strong Bullish Momentum 🟢
Red Glow: Strong Bearish Momentum 🔴
Note: The fill opacity is optimized to pop on dark themes while keeping price action visible!
🕯️ Trend-Based Bar Coloring: Optional feature to paint your candlesticks Green or Red based on the ribbon's direction. never trade against the trend again!
🔔 Integrated Alerts: Never miss a move. Set instant alarms for:
Bullish Cross: When the fast band crosses above the slow band.
Bearish Cross: When the fast band crosses below the slow band.
---
🛠️ How to Trade
1. The Expansion: Watch for the Ribbon (Cloud) to expand and glow bright. This indicates a high-momentum trend is active.
2. The Pullback: In a strong trend, price often pulls back into the "Cloud." This is your dynamic support/resistance zone for entries! 🎯
3. The Twist: When the Green Cloud twists and turns Red (or vice versa), it signals a potential major trend reversal.
---
⚙️ Fully Customizable
Toggle Everything: Turn the Cloud Fill, Bar Colors, or specific lines On/Off to suit your style.
Tooltips Included: Hover over any setting in the menu for a detailed explanation of what it does.
---
🔒 Invite-Only Access
This is a premium Invite-Only script.
To gain access to the Custom EMA Ribbon Pro:
📩 DM me here on TradingView for access.
See the flow. Trade the flow. 🌊📈
---
Disclaimer: Trading involves risk. This tool is for educational and analytical purposes only and does not constitute financial advice.
Bullish/Bearish Trend OscillatorThis oscillator compresses multiple trend signals into a single 0–100 gauge (50 = neutral). It combines:
Fast trend alignment (SMA stack + MACD)
Distance from SMA20 and SMA200 (stronger bear weighting below)
SMMA channel position
Trend line channel position
Price momentum (bar‑to‑bar change)
Volume ratio (green vs red candle weight)
The result is a smoothed, step‑colored trend score that highlights bullish vs bearish pressure and helps identify trend strength changes over time.
Note:
This is an educational indicator and not financial advice.
DEMA200 + EMA9/20/50 + VWAP (Paul Laurent Trading)This script is an all-in-one overlay indicator for TradingView that combines a **DEMA 200**, **EMA 9/20/50**, and TradingView’s **anchored VWAP** (the same VWAP logic as the default VWAP indicator). It’s designed to keep your chart clean while showing key trend and mean-reversion references in one place.
**How to use it**
* Add it to your chart like any indicator: open **Indicators**, search the script name, and click **Add to chart**.
* Use **EMA 9/20/50** for short-term trend and pullback structure (9 = fastest, 50 = slowest).
* Use **DEMA 200** as your long-term trend filter and major dynamic support/resistance.
* Use **VWAP (middle blue line)** as the intraday “fair value” reference. Price above VWAP generally shows stronger demand; below VWAP suggests weaker demand.
* Open the script **Settings** to customize:
* **Colors** and **Strength (line width)** for each line
* VWAP **Anchor Period** (Session, Week, Month, etc.)
* Optional VWAP **Bands** (off by default, can be enabled anytime)
SolQuant HeikenAshi Trend MTFOverview
SolQuant HeikenAshi Trend MTF is a professional-grade momentum tracking tool that utilizes double-smoothed Heikin-Ashi logic to define trend direction across multiple timeframes simultaneously. By filtering out market noise through Exponential Moving Average (EMA) smoothing, it provides a stabilized view of the trend on your current chart, 15-minute, and 1-hour intervals.
Key Features
Multi-Timeframe Overlays: Simultaneously tracks and displays trend clouds for the current timeframe, 15-minute, and 1-hour intervals for higher-context trading.
Double Smoothing Logic: Employs an initial EMA smoothing of raw price data followed by a second layer of smoothing on the Heikin-Ashi values to eliminate "whipsaws."
Dynamic Trend Clouds: Visualizes momentum through multi-layered fills that distinguish between the core candle body and the volatility range (wicks).
MTF Transparency Control: Fully customizable transparency settings allow you to overlay higher-timeframe trends without obstructing the primary price action.
Noise Filtering: Designed to maintain a stable color until a significant directional shift occurs, helping traders stay in trends longer.
How it Works
The script calculates the standard Heikin-Ashi formula using EMA-smoothed inputs for open, high, low, and close. For the MTF features, it utilizes the security function to request these smoothed values from higher timeframes (15m and 1h). These external values undergo an additional smoothing process before being plotted as customizable trend clouds or optional candles.
MTF vs. Lite Version
While the Lite version is restricted to single-timeframe analysis, this MTF version provides:
Integrated 15-minute and 1-hour trend overlays.
Customizable smoothing for each individual timeframe.
Multi-timeframe cloud fills for visual trend alignment.
Disclaimer
This indicator is for educational and analytical purposes only. Smoothed indicators may have inherent lag relative to raw price action and should be used as part of a comprehensive trading plan.
Delta Moving Average [RichKeys Lab]Delta Moving Average – Volume Confirmation & Divergence Engine
The Delta Moving Average is a specialized momentum tool built to reveal the hidden relationship between volume delta and price action. Instead of simply tracking direction, this indicator exposes whether buyers or sellers are truly in control beneath the surface — even when price appears quiet.
At its core, the Delta MA smooths the raw volume delta to show whether buying or selling pressure is increasing or fading. But the real power comes from its enhanced intelligence:
✔ Trend‑Shift Coloring
The moving average dynamically changes color when momentum flips from rising to falling or vice‑versa, giving you instant visual confirmation of trend transitions.
✔ Divergence Detection (Accumulation & Absorption Signals)
The indicator identifies moments when volume delta disagrees with price, highlighting two of the most important market behaviors:
• Selling absorption at resistance
Negative delta appears, but price refuses to fall — a sign that sellers are being absorbed.
• Buying accumulation at support
Positive delta appears, but price refuses to rise — a sign that buyers are quietly accumulating.
These divergence markers often precede powerful reversals or breakout continuations.
✔ Strong Trend Background Shading
When the Delta MA accelerates with unusual strength, the background highlights the move, helping you instantly recognize high‑pressure trend phases.
✔ Smart Reversal Alerts
Built‑in alerts notify you the moment the Delta MA flips direction, allowing you to react quickly to shifts in underlying order flow.
Why Traders Use It
This indicator is designed for traders who want to understand whether volume is confirming or contradicting price. It helps you:
• Spot early reversal pressure
• Confirm breakout strength
• Identify hidden accumulation or distribution
• Filter out weak moves with no real volume behind them
• Time entries with greater confidence
Whether you trade intraday or swing, the Delta Moving Average gives you a clearer read on the true buying and selling pressure driving the market.
SolQuant HeikenAshi Trend LiteOverview
SolQuant HeikenAshi Trend Lite is a specialized trend identification tool that utilizes double-smoothed Heikin-Ashi calculations to define market direction. By applying Exponential Moving Averages (EMA) to Heikin-Ashi values, the indicator filters out market noise and provides a clean, visual representation of trend strength through dynamic cloud fills.
Key Features
Double Smoothing Logic: Combines initial EMA smoothing of raw price data with a second layer of smoothing on the Heikin-Ashi outputs for a highly responsive yet stable trend line.
Visual Trend Cloud: Features a multi-layered fill system that distinguishes between the candle "body" (momentum) and "wicks" (volatility range) for immediate trend recognition.
Noise Reduction: Designed to prevent "whipsaws" by calculating a smoothed open and close, ensuring color changes only occur during meaningful directional shifts.
Customizable Aesthetics: Users can toggle the visibility of smoothed HA candles and adjust smoothing lengths to suit different asset classes and trading styles.
How it Works
The script first calculates EMA-smoothed values for Open, High, Low, and Close. It then derives Heikin-Ashi values from these smoothed inputs and applies a final smoothing length (Len2) to the results. The result is a "Trend Cloud" where bullish momentum is marked by the smoothed Close being above the smoothed Open, and bearish momentum is marked by the opposite.
Lite vs. MTF Version
This Lite version provides essential single-timeframe trend tracking. For traders requiring deeper context, the SolQuant HeikenAshi Trend MTF version offers:
Multi-timeframe trend alignment tracking.
Integrated dashboard for monitoring HA trends across several timeframes simultaneously.
Advanced reversal signals based on MTF convergence.
Disclaimer
This indicator is for educational and analytical purposes only. Smoothed indicators may have inherent lag and should be used in conjunction with other technical analysis tools.
DEMA200 + EMA9/20/50 + VWAP (Paul Laurent Trading)This script is an all-in-one overlay indicator for TradingView that combines a **DEMA 200**, **EMA 9/20/50**, and TradingView’s **anchored VWAP** (the same VWAP logic as the default VWAP indicator). It’s designed to keep your chart clean while showing key trend and mean-reversion references in one place.
**How to use it**
* Add it to your chart like any indicator: open **Indicators**, search the script name, and click **Add to chart**.
* Use **EMA 9/20/50** for short-term trend and pullback structure (9 = fastest, 50 = slowest).
* Use **DEMA 200** as your long-term trend filter and major dynamic support/resistance.
* Use **VWAP (middle blue line)** as the intraday “fair value” reference. Price above VWAP generally shows stronger demand; below VWAP suggests weaker demand.
* Open the script **Settings** to customize:
* **Colors** and **Strength (line width)** for each line
* VWAP **Anchor Period** (Session, Week, Month, etc.)
* Optional VWAP **Bands** (off by default, can be enabled anytime)
