Get started

Short

Session ATR Risk ToolSession ATR Risk Tool ## Overview The Session ATR Risk Tool is a discretionary **risk-management and trade-planning overlay**. It sizes a stop loss from market volatility, projects fixed reward-to-risk targets (1:1, 1:2, 1:3), and draws a standard-deviation ladder so you can see your full trade geometry on the chart before you enter. It also estimates a contract count from a fixed dollar risk, and prints a context table of intraday, daily and weekly volatility. It is built and tuned for Micro E-mini Nasdaq-100 (MNQ) intraday trading, but every parameter is exposed as an input, so it works on any symbol once you set the correct point value. This tool does **not** generate buy/sell signals and makes no claim about win rate or profitability. It is a visualization and planning aid only. ## What makes it different Most reward-to-risk tools place lines a fixed number of ticks or a single ATR away. This tool adds three things in one package: 1. **Two selectable stop engines.** The stop distance can be derived from either the chart-timeframe ATR (small, realistic intraday stops) or from a rolling average of completed *session* ranges (swing-sized stops). You choose which volatility regime sizes your risk. 2. **A standard-deviation ladder denominated in your own stop distance.** Instead of arbitrary fib or price-percent levels, each rung is a multiple (−0.5, 1, 2, 3, 4 by default, all editable) of the exact ATR-based stop distance, projected from entry. One "sd" on the chart always equals one unit of the risk you are actually taking. 3. **A volatility context table.** Intraday ATR, averaged session range, daily ATR(14) and weekly ATR(14) are shown side by side so the chosen stop can be judged against higher-timeframe volatility at a glance. ## How it works - **Session range capture.** The script tracks the high and low of each completed session window (default 09:30–16:00 exchange time) and stores the high-low range. It keeps a rolling buffer of the most recent N sessions (default 10) and averages them to produce a "session ATR" in points. - **Intraday ATR.** A standard ATR of configurable length is calculated on the chart timeframe for scalp-sized stops. - **Stop distance.** `Stop distance = chosen basis × ATR multiplier`, where the basis is either the intraday ATR or the averaged session range. The multiplier lets you tighten or widen the stop. - **Trade geometry.** From the entry price (live price by default, or a fixed price you type in) and the trade direction, the tool places the stop one stop-distance against you, then projects targets at 1×, 2× and 3× the stop distance for clean 1:1 / 1:2 / 1:3 reward-to-risk. - **Standard-deviation ladder.** Each ladder rung is plotted at `entry + direction × stop distance × deviation`, giving an evenly scaled map of where price sits relative to your risk unit. - **Position-size estimate.** Dollar risk per contract = stop distance × point value. Estimated contracts = floor(risk per trade ÷ dollar risk per contract). This is an arithmetic estimate for planning, not an order-routing instruction. - **Higher-timeframe context.** Daily and weekly ATR(14) are pulled from confirmed higher-timeframe bars (non-repainting) for the context table. All levels are drawn as faded horizontal rays anchored to the bar grid, so they stay locked to the candles when you pan or zoom. Drawings rebuild on the most recent bar to keep the chart clean. ## How to use it 1. Add the tool to an intraday chart of the instrument you trade. 2. Set **$ per Point** for your instrument (MNQ = 2.0, NQ = 20.0, MES = 5.0, etc.) and your **Risk per Trade ($)**. 3. Choose your **Stop Basis** — "Intraday ATR" for scalps and intraday entries, "Session Range" for wider, swing-style stops. 4. Adjust the **ATR Multiplier** to set how far the stop sits from entry. As a starting guide, roughly 1.0–2.0× with Intraday ATR on a 1–5 minute chart; if using Session Range, scale the multiplier down (around 0.10–0.20×) because the session range is much larger. 5. Set **Trade Direction** (Long or Short). Leave **Entry Price** at 0 to anchor the levels to live price, or type your actual fill price to lock the geometry in place after entry. 6. Read your plan off the chart: the Stop, the 1:1 / 1:2 / 1:3 targets, the standard-deviation ladder, and the info table showing the stop in points and dollars plus an estimated contract count. ## Inputs - **Session Window / Sessions to Average** — defines the session and how many completed sessions feed the averaged session range. - **Stop Basis / Intraday ATR Length / ATR Multiplier** — select and tune the volatility source for the stop. - **Trade Direction / Entry Price** — direction toggle and optional fixed entry. - **$ per Point / Risk per Trade ($)** — instrument tick value and account risk used for the size estimate. - **SDev Ladder deviations** — the five editable ladder multiples. - **Visual controls** — ray length back/forward, table toggle, and colors for up, down and entry levels. ## Notes and limitations - The contract-count figure is an arithmetic estimate from your inputs. It is not connected to a broker and places no orders. Always confirm size and risk in your own platform. - "Session ATR" here means the averaged high-low **range** of recent sessions, not a true-range calculation; it is intentionally a wider, regime-level measure. - Higher-timeframe ATR values use confirmed bars to avoid repainting. - Reward-to-risk targets are fixed geometric projections; they are not predictions of price reaching those levels. - This script is a planning and visualization tool only. It is not financial advice and does not guarantee any outcome.
Pine Script® indicator
by mayb1dayy
Multi-Signal the FlasherTitle: Multi-Signal Flasher - External Signal Alert System Short Description: Visual screen flash alerts triggered by external indicator signals. Supports 4 signal sources with separate Long/Short flash colors. Description: This indicator provides a powerful visual alert system that flashes your entire chart when external indicator signals fire. Perfect for traders who need unmissable alerts when their custom signals trigger. Features 4 External Signal Sources - Connect up to 4 different indicators Long/Short Classification - Assign each signal as Long or Short for different colored flashes OR Logic - Any enabled signal firing triggers the flash Customizable Flash Colors - Separate color schemes for Long and Short signals Adjustable Cycles - Control how many times the colors alternate On-Screen Message - Displays "LONG SIGNAL!" or "SHORT SIGNAL!" during flash How It Works The indicator monitors your selected external signal sources. The trigger fires when a signal transitions from no value to a value >= 1, the chart flashes with alternating colors to grab your attention. Signals set to Long → Flash with Long colors (default: green/purple) Signals set to Short → Flash with Short colors (default: red/yellow) Setup Add your signal indicators to the chart first Add this indicator In settings, enable Signal 1-4 as needed Select each signal's plot from the dropdown Set each signal as Long or Short Check "Enable the Flasher" to arm the system Customize colors and messages to your preference Important Notes ⚠️ Seizure Warning - This indicator flashes colors rapidly. User discretion is advised for those with photosensitive epilepsy. Flashes only occur in real-time - historical bars will not trigger flashes The trigger fires when a signal transitions from no value to a value >= 1. not while signal persists Color cycling depends on feed updates Use Cases Multi-indicator confluence alerts Separate long/short signal systems High-visibility scalping alerts Any system where missing a signal is costly Credits: Original "the Flasher" code by @allanster Core flash function and table-based color cycling system Modified by @m4ybee Multi-signal source support (4 inputs) External indicator integration via input.source() Long/Short signal classification OR logic signal combining Separate color schemes for Long/Short
Pine Script® indicator
by mm44yybbee
1
Session Opening Range Breakout (ORBO)This strategy automates a classic Opening Range Breakout (ORBO) approach: it builds a price range for the first minutes after the market opens, then looks for strong breakouts above or below that range to catch early directional moves. Concept The idea behind ORBO is simple: The first minutes after the session open are often highly informative. Price forms an “opening range” that acts as a mini support/resistance zone. A clean breakout beyond this zone can lead to high-momentum moves. This script turns that logic into a fully backtestable strategy in TradingView. How the strategy works Opening Range Session Default session: 09:30–09:50 (exchange time) During this window, the script tracks: orHigh → highest high within the session orLow → lowest low within the session This forms your Opening Range for the day. Breakout Logic (after the window ends) Once the defined session ends: Long Entry: If the close crosses above the Opening Range High (orHigh), → strategy.entry("OR Long", strategy.long) is triggered. Short Entry: If the close crosses below the Opening Range Low (orLow), → strategy.entry("OR Short", strategy.short) is triggered. Only one opening range per day is considered, which keeps the logic clean and easy to interpret. Daily Reset At the start of a new trading day, the script resets: orHigh := na orLow := na A fresh Opening Range is then built using the next session’s 09:30–09:50 candles. This ensures entries are always based on today’s structure, not yesterday’s. Visuals & Inputs Inputs: Opening range session → default: "0930-0950" Show OR levels → toggle visibility of OR High / Low lines Fill range body → optional shaded zone between OR High and OR Low Chart visuals: A green line marks the Opening Range High. A red line marks the Opening Range Low. Optional yellow fill highlights the entire OR zone. Background shading during the session shows when the range is currently being built. These visuals make it easy to see: Where the OR sits relative to current price How clean / noisy the breakout was How often price respects or rejects the opening zone Backtesting & Optimization Because this is written as a strategy(): You can use TradingView’s Strategy Tester to view: Win rate Net profit Drawdown Profit factor Equity curve Ideas to experiment with: Change the session window (e.g., 09:15–09:45, 10:00–10:30) Apply to different: Markets: indices, FX, crypto, stocks Timeframes: 1m / 5m / 15m Add your own: Stop Loss & Take Profit levels Time filters (only trade certain days / times) Volatility filters (e.g., ATR, range size thresholds) Higher-timeframe trend filter (e.g., only take longs above 200 EMA)
Pine Script® strategy
by AIScripts
TitanGrid L/S SuperEngineTitanGrid L/S SuperEngine Experimental Trend-Aligned Grid Signal Engine for Long & Short Execution 🔹 Overview TitanGrid is an advanced, real-time signal engine built around a tactical grid structure. It manages Long and Short trades using trend-aligned entries, layered scaling, and partial exits. Unlike traditional strategy() -based scripts, TitanGrid runs as an indicator() , but includes its own full internal simulation engine. This allows it to track capital, equity, PnL, risk exposure, and trade performance bar-by-bar — effectively simulating a custom backtest, while remaining compatible with real-time alert-based execution systems. The concept was born from the fusion of two prior systems: Assassin’s Grid (grid-based execution and structure) + Super 8 (trend-filtering, smart capital logic), both developed under the AssassinsGrid framework. 🔹 Disclaimer This is an experimental tool intended for research, testing, and educational use. It does not provide guaranteed outcomes and should not be interpreted as financial advice. Use with demo or simulated accounts before considering live deployment. 🔹 Execution Logic Trend direction is filtered through a custom SuperTrend engine. Once confirmed: • Long entries trigger on pullbacks, exiting progressively as price moves up • Short entries trigger on rallies, exiting as price declines Grid levels are spaced by configurable percentage width, and entries scale dynamically. 🔹 Stop Loss Mechanism TitanGrid uses a dual-layer stop system: • A static stop per entry, placed at a fixed percentage distance matching the grid width • A trend reversal exit that closes the entire position if price crosses the SuperTrend in the opposite direction Stops are triggered once per cycle, ensuring predictable and capital-aware behavior. 🔹 Key Features • Dual-side grid logic (Long-only, Short-only, or Both) • SuperTrend filtering to enforce directional bias • Adjustable grid spacing, scaling, and sizing • Static and dynamic stop-loss logic • Partial exits and reset conditions • Webhook-ready alerts (browser-based automation compatible) • Internal simulation of equity, PnL, fees, and liquidation levels • Real-time dashboard for full transparency 🔹 Best Use Cases TitanGrid performs best in structured or mean-reverting environments. It is especially well-suited to assets with the behavioral profile of ETH — reactive, trend-intraday, and prone to clean pullback formations. While adaptable to multiple timeframes, it shows strongest performance on the 15-minute chart , offering a balance of signal frequency and directional clarity. 🔹 License Published under the Mozilla Public License 2.0 . You are free to study, adapt, and extend this script. 🔹 Panel Reference The real-time dashboard displays performance metrics, capital state, and position behavior: • Asset Type – Automatically detects the instrument class (e.g., Crypto, Stock, Forex) from symbol metadata • Equity – Total simulated capital: realized PnL + floating PnL + remaining cash • Available Cash – Capital not currently allocated to any position • Used Margin – Capital locked in open trades, based on position size and leverage • Net Profit – Realized gain/loss after commissions and fees • Raw Net Profit – Gross result before trading costs • Floating PnL – Unrealized profit or loss from active positions • ROI – Return on initial capital, including realized and floating PnL. Leverage directly impacts this metric, amplifying both gains and losses relative to account size. • Long/Short Size & Avg Price – Open position sizes and volume-weighted average entry prices • Leverage & Liquidation – Simulated effective leverage and projected liquidation level • Hold – Best-performing hold side (Long or Short) over the session • Hold Efficiency – Performance efficiency during holding phases, relative to capital used • Profit Factor – Ratio of gross profits to gross losses (realized) • Payoff Ratio – Average profit per win / average loss per loss • Win Rate – Percent of profitable closes (including partial exits) • Expectancy – Net average result per closed trade • Max Drawdown – Largest recorded drop in equity during the session • Commission Paid – Simulated trading costs: maker, taker, funding • Long / Short Trades – Count of entry signals per side • Time Trading – Number of bars spent in active positions • Volume / Month – Extrapolated 30-day trading volume estimate • Min Capital – Lowest equity level recorded during the session 🔹 Reference Ranges by Strategy Type Use the following metrics as reference depending on the trading style: Grid / Mean Reversion • Profit Factor: 1.2 – 2.0 • Payoff Ratio: 0.5 – 1.2 • Win Rate: 50% – 70% (based on partial exits) • Expectancy: 0.05% – 0.25% • Drawdown: Moderate to high • Commission Impact: High Trend-Following • Profit Factor: 1.5 – 3.0 • Payoff Ratio: 1.5 – 3.5 • Win Rate: 30% – 50% • Expectancy: 0.3% – 1.0% • Drawdown: Low to moderate Scalping / High-Frequency • Profit Factor: 1.1 – 1.6 • Payoff Ratio: 0.3 – 0.8 • Win Rate: 80% – 95% • Expectancy: 0.01% – 0.05% • Volume / Month: Very high Breakout Strategies • Profit Factor: 1.4 – 2.2 • Payoff Ratio: 1.2 – 2.0 • Win Rate: 35% – 60% • Expectancy: 0.2% – 0.6% • Drawdown: Can be sharp after failed breakouts 🔹 Note on Performance Simulation TitanGrid includes internal accounting of fees, slippage, and funding costs. While its logic is designed for precision and capital efficiency, performance is naturally affected by exchange commissions. In frictionless environments (e.g., zero-fee simulation), its high-frequency logic could — in theory — extract substantial micro-edges from the market. However, real-world conditions introduce limits, and all results should be interpreted accordingly.
Pine Script® indicator
by AssassinsGrid
5
VWAP + Candle-Rating SELL (close, robust)This multi‐timeframe setup first scans the 15-minute chart for strong bearish candles (body position in the bottom 40% of their range, i.e. rating 4 or 5) that close below the session VWAP. When it finds the first such “setup” of a trading period, it pins the low of that 15-minute candle as a trigger level and draws a persistent red line there. On the 5-minute chart, the strategy then waits for a similarly strong bearish candle (rating 4 or 5) to close below that marked low—at which point it emits a one‐time SELL signal. The trigger level remains in place (and additional sell signals are locked out) until the market “rescues” the price: a 15-minute bullish candle (rating 1 or 2) closing back above VWAP clears the old setup and allows the next valid bearish 15-minute candle to form a new trigger. This design ensures you only trade the most significant breakdowns after a clear bearish bias and avoids repeated signals until a genuine bullish reversal resets the system.
Pine Script® indicator
by sketan12
Ultra Trade JournalThe Ultra Trade Journal is a powerful TradingView indicator designed to help traders meticulously document and analyze their trades. Whether you're a novice or an experienced trader, this tool offers a clear and organized way to visualize your trading strategy, monitor performance, and make informed decisions based on detailed trade metrics. Detailed Description The Ultra Trade Journal indicator allows users to input and visualize critical trade information directly on their TradingView charts. ......... User Inputs Traders can specify entry and exit prices , stop loss levels, and up to four take profit targets. ..... Dynamic Plotting Once the input values are set, the indicator automatically plots horizontal lines for entry, exit, stop loss, and each take profit level on the chart. These lines are visually distinct, using different colors and styles (solid, dashed, dotted) to represent each element clearly. ..... Live Position Tracking If enabled, the indicator can adjust the exit price in real-time based on the current market price, allowing traders to monitor live positions effectively. ..... Tick Calculations The script calculates the number of ticks between the entry price and each exit point (stop loss and take profits). This helps in understanding the movement required for each target and assessing the potential risk and reward. ..... Risk-Reward Ratios For each take profit level, the indicator computes the risk-reward (RR) ratio by comparing the ticks at each target against the stop loss ticks. This provides a quick view of the potential profitability versus the risk taken. ..... Comprehensive Table Display A customizable table is displayed on the chart, summarizing all key trade details. This includes the entry and exit prices, stop loss and take profit levels, tick counts, and their respective RR ratios. Users can adjust the table's Position and text color to suit their preferences. ..... Visual Enhancements The indicator uses adjustable background shading between entry and stop loss/take profit lines to visually represent potential trade outcomes. This shading adjusts based on whether the trade is long or short, providing an intuitive understanding of trade performance. ......... Overall, the Ultra Trade Journal combines visual clarity with detailed analytics, enabling traders to keep a well-organized record of their trades and enhance their trading strategies through insightful data.
Pine Script® indicator
by Rathack
CC Trend strategy 2- Downtrend ShortTrend Strategy #2 Indicators: 1. EMA(s) 2. Fibonacci retracement with a mutable lookback period Strategy: 1. Short Only 2. No preset Stop Loss/Take Profit 3. 0.01% commission 4. When in a profit and a closure above the 200ema, the position takes a profit. 5. The position is stopped When a closure over the (0.764) Fibonacci ratio occurs. * NO IMMEDIATE RE-ENTRIES EVER!* How to use it and what makes it unique: This strategy will enter often and stop quickly. The goal with this strategy is to take losses often but catch the big move to the downside when it occurs through the Silvercross/Fibonacci combination. This is a unique strategy because it uses a programmed Fibonacci ratio that can be used within the strategy and on any program. You can manipulate the stats by changing the lookback period of the Fibonacci retracement and looking at different assets/timeframes. This description tells the indicators combined to create a new strategy, with commissions and take profit/stop loss conditions included, and the process of strategy execution with a description of how to use it. If you have any questions feel free to PM me and boost if you found it helpful. Thank you, pineUSERS! CHEATCODE1
Pine Script® strategy
by CheatCode1
Bollinger Bands - Breakout StrategyThe Bollinger Bands - Breakout Strategy is a trend-following optimized for short-term trading in the crypto market. This strategy employs the Bollinger Bands, a widely recognized technical indicator, as its primary instrument for pinpointing potential trades. It is capable of executing both long and short positions, depending on whether the market is in a spot or futures, and is particularly effective in trending markets. The strategy boasts a high degree of configurability, allowing users to set the Bollinger Bands period and deviation, trend filter, volatility filter, trade direction filter, rate of change filter, and date filter. Furthermore, it offers options for Take Profit, Stop Loss, and Trailing Stop for both long and short positions, ensuring a comprehensive risk management approach. The inclusion of a maximum intraday loss feature adds another layer of protection, making this strategy a valuable tool for traders seeking a professional and adaptable trading system. Name : Bollinger Bands - Breakout Strategy Category : Trend Follower based on Bollinger Bands Operating mode : Long and Short on Futures or Long on Spot Trade duration : Intraday Timeframe : 2H, 3H, 4H, 5H Market : Crypto Suggested usage : Trending Markets Entry : When the price crosses above or below the Bollinger Bands Exit : Opposite Cross or Profit target, Trailing stop or Stop loss Configuration : - Bollinger Bands period and deviation - Trend Filter - Volatility Filter - Trade direction filter - Rate of Change filter - Date Filter (for backtesting purposes) - Take Profit, Stop Loss and Trailing Stop for long and short positions - Risk Management: Max Intraday Loss Backtesting : ⁃ Exchange: BINANCE ⁃ Pair: BTCUSDT.P ⁃ Timeframe: 4H ⁃ Fee: 0.025% ⁃ Slippage: 1 - Initial Capital: 10000 USDT - Position sizing: 10% of Equity - Start : 2019-09-19 (Out Of Sample from 2022-12-23) - Bar magnifier: on Credits : - LucF of Pine Coders for f_security function to avoid repainting using security. - QuantNomad for Monthly Table. Disclaimer : Risk Management is crucial, so adjust stop loss to your comfort level. A tight stop loss can help minimise potential losses. Use at your own risk. How you or we can improve? Source code is open so share your ideas! Leave a comment and smash the boost button! Thanks for your attention, happy to support the TradingView community.
Pine Script® strategy
by TheSocialCryptoClub
7
Short Sale Restriction (SSR) Level - Intraday and daily chartsThis script plots the Short Sale Restriction (SSR) Level relative to the previous day's closing price. It works on any time frame from 1 minute to daily, showing the correct level even during the extended session. The Short Sale Restriction (SSR) is a rule of the Securities and Exchange Commission (SEC) that restricts traders from short-selling stocks that are rapidly decreasing in value in an attempt to profit from the price drop. The rule was introduced in 2010, after the 2008 financial crisis, to prevent market manipulation and excessive volatility. The SSR works as follows: when the price of a particular stock drops 10% compared to the previous day's closing price, the SSR is triggered and a temporary limitation is imposed on traders' ability to short-sell that stock for the rest of the trading day and the following day. During the SSR activation period, traders can still short-sell, but only if the sale is "covered" by another long position on the same stock. Knowledge of the SSR level is especially important for day traders because it helps them to plan their trading strategies in advance, avoiding situations where short-selling becomes more difficult. Additionally, if a stock has exceeded the SSR threshold, traders can expect an increase in price volatility.
Pine Script® indicator
by valpatrad
6
Band of Filtered RS by Mustafa ÖZVERBand of Filtered RS by Mustafa ÖZVER This code shows a range (max-min values) price may get if we get strong movements. These values is based on RSI (Relative Strange Index). And also these are calculated using RSI, if we get trades to make rsi is equal to 25 (or rsi down limit) or 75 (rsi up limit) or any value you set, how much will price value get? This code calculate these and shows these to you on graph. This price are between these band limits because we expect cross reaction to hard movements on price. For scalping, we can use these values as long signal when price under down limit, short signal when price over up limit, But only these values can not guarantee good results for trading. BE CAREFUL
Pine Script® indicator
by Mustafaozver
1
Simple RSI and SMA Long and Short (by Coinrule)The relative strength index ( RSI ) is a momentum indicator used in technical analysis . RSI measures the speed and magnitude of a security's recent price changes to evaluate overvalued or undervalued conditions in the price of that security. The RSI is displayed as an oscillator (a line graph) on a scale of zero to 100. The RSI can do more than point to overbought and oversold securities. It can also indicate securities that may be primed for a trend reversal or corrective pullback in price. It can signal when to buy and sell. Traditionally, an RSI reading of 70 or above indicates an overbought situation. A reading of 30 or below indicates an oversold condition. A simple moving average ( SMA ) calculates the average of a selected range of prices, usually closing prices, by the number of periods in that range. The Strategy enters and closes the trade when the following conditions are met: LONG SMA100 is greater than SMA150 RSI is greater than 50 SHORT SMA100 is less than SMA150 RSI is less than 50 When a long position is opened, it remains open until the conditions for a short are met at which point the long position is closed and the short position is opened. Then, when the conditions for the long position are met, the short will be closed and a long will be opened. This strategy is back tested from 1 January 2022 to simulate how the strategy would work in a bear market. The strategy provides good returns. The strategy assumes each order is using 30% of the available coins to make the results more realistic and to simulate you only ran this strategy on 30% of your holdings. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance.
Pine Script® strategy
by Coinrule
2
Stock Gaps SPY Correlation StrategyThis is daytrade stock strategy, designed to take the best out of the daily gaps that are forming between the close of previous day and opening of present day. At the same time its logic has been adapted for SPY chart, in order to use correlation with the other stocks/assets/ etf which are linked with SP500 movement. Lastly it has been added 2 new confirmation logics, based on the USI: advance/decline chart and percentage above vwap among all US stocks. The rules for entry are simple : We are at the opening daily candle, we have a long/short gap based on where the opening is happening and at the same time we are checking to see that the current different between the current difference between low and previous high (or viceversa) is higher than an established parameter(minimal deviation ) For exit, we exit based on time/clock parameter, in this case by default I selected 1h and half before close of the US session. For testing purposes I have used 10% of the available capital, with a 0.0035$ comission per each share bought ( IBKR comissions) If there are any questions, please let me know either here or in private !
Pine Script® strategy
by exlux
Bitfinex Shorts StratOverview This strat applies the data from BITFINEX:USDSHORTS to the RSI indicator in order to provide SHORT/LONG entries as the number of contracts goes up and down. Although Bitfinex has lost relevance over the years its generally considered an exchange dominated by smart money rather than retail. I'd like to see if any insights can be gained by following their trading behaviour. How to use Select the underlying security you wish to trade and load the indicator. Select the appropriate short security by searching in the Bitfinex Short Symbol. RSI settings apply to short symbol not the actual asset. Strategy shorts the underlying asset when shorts rise and longs when they drop. The shorts symbol will follow the value of the loaded chart. Works best on 4 hour chart. Why use shorts only rather than both long/shorts? Bitfinex longs seem to be on a long-term uptrend accounting for 25x the number of shorts. Might be enormous confidence on part of the whales, but more likely reflects selling spot and buying perp. Given the size disparity and price action I don't think longs info is adding much. Problems with script: a) We don't really know the intentions of short players (e.g. speculation or hedging spot) b) The script uses a decline in shorts as a long signal c) RSI is a blunt tool there are probably better options for calculating high/lows in shorts d) Shorts are accumulated both at highs and also when BTC price is already heavily trending down. This suggests some are speculative (at the highs) or protective/hedging during a decline Takeaways: Based on this strat Bitfinex whales are more wrong than right. Results don't carry across well into altcoins using the accompanying short symbol. However, what is interesting is that applying the BITFINEX:BTCUSDSHORTS to altcoin charts does work pretty well. Strat needs some refinement to control for entries under different circumstances. Probably not a great idea to use this as a strategy in isolation, but highlights how Bitfinex whale behaviour is a good gauge to follow.
Pine Script® strategy
by kuhoerk
1
Ichimoku Cloud with ADX (By Coinrule)The Ichimoku Cloud is a collection of technical indicators that show support and resistance levels, as well as momentum and trend direction. It does this by taking multiple averages and plotting them on a chart. It also uses these figures to compute a “cloud” that attempts to forecast where the price may find support or resistance in the future. The Ichimoku Cloud was developed by Goichi Hosoda, a Japanese journalist, and published in the late 1960s. It provides more data points than the standard candlestick chart. While it seems complicated at first glance, those familiar with how to read the charts often find it easy to understand with well-defined trading signals. The Ichimoku Cloud is composed of five lines or calculations, two of which comprise a cloud where the difference between the two lines is shaded in. The lines include a nine-period average, a 26-period average, an average of those two averages, a 52-period average, and a lagging closing price line. The cloud is a key part of the indicator. When the price is below the cloud, the trend is down. When the price is above the cloud, the trend is up. The above trend signals are strengthened if the cloud is moving in the same direction as the price. For example, during an uptrend, the top of the cloud is moving up, or during a downtrend, the bottom of the cloud is moving down. DMI is simple to interpret. When +DI > - DI, it means the price is trending up. On the other hand, when -DI > +DI , the trend is weak or moving on the downside. The ADX does not give an indication about the direction but about the strength of the trend. Typically values of ADX above 25 mean that the trend is steeply moving up or down, based on the -DI and +D positioning. This script aims to capture swings in the DMI, and thus, in the trend of the asset, using a contrarian approach. Trading on high values of ADX , the strategy tries to spot extremely oversold and overbought conditions. Values of ADX above 45 may suggest that the trend has overextended and is may be about to reverse. This strategy combines the Ichimoku Cloud with the ADX indicator to better enter trades. Long/Short orders are placed when these basic signals are triggered. Long Position: Tenkan-Sen is above the Kijun-Sen Chikou-Span is above the close of 26 bars ago Close is above the Kumo Cloud MACD line crosses over the signal line -DI is greater than +DI ADX is greater than 45 Short Position: Tenkan-Sen is below the Kijun-Sen Chikou-Span is below the close of 26 bars ago Close is below the Kumo Cloud MACD line crosses under the signal line +DI is greater than -DI ADX is less than 45 The script is backtested from 1 January 2022 and provides good returns. The strategy assumes each order is using 30% of the available coins to make the results more realistic and to simulate you only ran this strategy on 30% of your holdings. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance. This script also works well on MATIC (15m timeframe), ETH (5m timeframe), and SOL (15m timeframe).
Pine Script® strategy
by Coinrule
BBSS - Bollinger Bands Scalping SignalsModified Bollinger Bands Indicator Added: - color change divergence (green) and narrowing (red) of the upper and lower bands - color change of the moving average - upward trend (green) and downward trend (red) - the appearance of a potential signal for long and short positions when the candle closes behind the upper or lower bands. How to use the indicator: Long conditions: - the price breaks through the upper band - Bollinger bands are expanding and should be green - the mid-line is green - the trigger candle should be green Short conditions: - the price breaks through the lower band - Bollinger bands are expanding and should be red - the mid-line is red - the trigger candle should be red
Pine Script® indicator
by berezitskysl
3
Ichimoku Cloud with MACD (By Coinrule)The Ichimoku Cloud is a collection of technical indicators that show support and resistance levels, as well as momentum and trend direction. It does this by taking multiple averages and plotting them on a chart. It also uses these figures to compute a “cloud” that attempts to forecast where the price may find support or resistance in the future. The Ichimoku Cloud was developed by Goichi Hosoda, a Japanese journalist, and published in the late 1960s. It provides more data points than the standard candlestick chart. While it seems complicated at first glance, those familiar with how to read the charts often find it easy to understand with well-defined trading signals. The Ichimoku Cloud is composed of five lines or calculations, two of which comprise a cloud where the difference between the two lines is shaded in. The lines include a nine-period average, a 26-period average, an average of those two averages, a 52-period average, and a lagging closing price line. The cloud is a key part of the indicator. When the price is below the cloud, the trend is down. When the price is above the cloud, the trend is up. The above trend signals are strengthened if the cloud is moving in the same direction as the price. For example, during an uptrend, the top of the cloud is moving up, or during a downtrend, the bottom of the cloud is moving down. The MACD is a trend following momentum indicator and provides identification of short-term trend direction. In this variation it utilises the 12-period as the fast and 26-period as the slow length EMAs, with signal smoothing set at 9. This strategy combines the Ichimoku Cloud with the MACD indicator to better enter trades. Long/Short orders are placed when three basic signals are triggered. Long Position: Tenkan-Sen is above the Kijun-Sen Chikou-Span is above the close of 26 bars ago Close is above the Kumo Cloud MACD line crosses over the signal line Short Position: Tenkan-Sen is below the Kijun-Sen Chikou-Span is below the close of 26 bars ago Close is below the Kumo Cloud MACD line crosses under the signal line The script is backtested from 1 June 2022 and provides good returns. The strategy assumes each order is using 30% of the available coins to make the results more realistic and to simulate you only ran this strategy on 30% of your holdings. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance. This script also works well on MATIC (1h timeframe), AVA (45m timeframe), and BTC (30m timeframe).
Pine Script® strategy
by Coinrule
Ichimoku Cloud with RSI (By Coinrule)The Ichimoku Cloud is a collection of technical indicators that show support and resistance levels, as well as momentum and trend direction. It does this by taking multiple averages and plotting them on a chart. It also uses these figures to compute a “cloud” that attempts to forecast where the price may find support or resistance in the future. The Ichimoku Cloud was developed by Goichi Hosoda, a Japanese journalist, and published in the late 1960s. It provides more data points than the standard candlestick chart. While it seems complicated at first glance, those familiar with how to read the charts often find it easy to understand with well-defined trading signals. The Ichimoku Cloud is composed of five lines or calculations, two of which comprise a cloud where the difference between the two lines is shaded in. The lines include a nine-period average, a 26-period average, an average of those two averages, a 52-period average, and a lagging closing price line. The cloud is a key part of the indicator. When the price is below the cloud, the trend is down. When the price is above the cloud, the trend is up. The above trend signals are strengthened if the cloud is moving in the same direction as the price. For example, during an uptrend, the top of the cloud is moving up, or during a downtrend, the bottom of the cloud is moving down. This strategy combines the Ichimoku Cloud with the RSI indicator to better enter trades. Long/Short orders are placed when three basic signals are triggered. Long Position: Tenkan-Sen is above the Kijun-Sen Chikou-Span is above the close of 26 bars ago Close is above the Kumo Cloud RSI is greater less than 50 Short Position: Tenkan-Sen is below the Kijun-Sen Chikou-Span is below the close of 26 bars ago Close is below the Kumo Cloud RSI is greater than 50 The script is backtested from 1 June 2022 and provides good returns. The strategy assumes each order is using 30% of the available coins to make the results more realistic and to simulate you only ran this strategy on 30% of your holdings. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance. This script also works well on SOL (45m timeframe), BNB (1h timeframe), and ETH (1h timeframe).
Pine Script® strategy
by Coinrule
Inverse MACD + DMI Scalping with Volatility Stop (By Coinrule)This script is focused on shorting during downtrends and utilises two strength based indicators to provide confluence that the start of a short-term downtrend has occurred - catching the opportunity as soon as possible. This script can work well on coins you are planning to hodl for long-term and works especially well whilst using an automated bot that can execute your trades for you. It allows you to hedge your investment by allocating a % of your coins to trade with, whilst not risking your entire holding. This mitigates unrealised losses from hodling as it provides additional cash from the profits made. You can then choose to hodl this cash, or use it to reinvest when the market reaches attractive buying levels. Alternatively, you can use this when trading contracts on futures markets where there is no need to already own the underlying asset prior to shorting it. ENTRY The trading system uses the Momentum Average Convergence Divergence (MACD) indicator and the Directional Movement Index (DMI) indicator to confirm when the best time is for selling. Combining these two indicators prevents trading during uptrends and reduces the likelihood of getting stuck in a market with low volatility. The MACD is a trend following momentum indicator and provides identification of short-term trend direction. In this variation it utilises the 12-period as the fast and 26-period as the slow length EMAs, with signal smoothing set at 9. The DMI indicates what way price is trending and compares prior lows and highs with two lines drawn between each - the positive directional movement line (+DI) and the negative directional movement line (-DI). The trend can be interpreted by comparing the two lines and what line is greater. When the negative DMI is greater than the positive DMI, there are more chances that the asset is trading in a sustained downtrend, and vice versa. The system will enter trades when two conditions are met: 1) The MACD histogram turns bearish. 2) When the negative DMI is greater than the positive DMI. EXIT The strategy comes with a fixed take profit combined with a volatility stop, which acts as a trailing stop to adapt to the trend's strength. Depending on your long-term confidence in the asset, you can edit the fixed take profit to be more conservative or aggressive. The position is closed when: Take-Profit Exit: +8% price decrease from entry price. OR Stop-Loss Exit: Price crosses above the volatility stop. In general, this approach suits medium to long term strategies. The backtesting for this strategy begins on 1 April 2022 to 18 July 2022 in order to demonstrate its results in a bear market. Back testing it further from the beginning of 2022 onwards further also produces good returns. Pairs that produce very strong results include SOLUSDT on the 45m timeframe, MATICUSDT on the 2h timeframe, and AVAUSDT on the 1h timeframe. Generally, the back testing suggests that it works best on the 45m/1h timeframe across most pairs. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance.
Pine Script® strategy
by Coinrule
1
CryptoCurrency Short X-RayIndicator to show the data on short sellers for cryptocurrencies. Color coded as the following: Orange=Shortsellers are Shorting Blue =Shortsellers are Covering Red =Others are Selling Green =Others are Buying Includes lines to show the range that shortsellers have recently (within the last 1024 bars) been operating in to give indication on how extended they are, along with 25%, 50%, and 75% levels inbetween. Do not rely exclusively on this indicator as this can change wildly depending on the situation at hand, and be sure to select the short data in the settings that matches the ticker you're trading.
Pine Script® indicator
by EsIstTurnt
Short Swing Bearish MACD Cross (By Coinrule)This strategy is oriented towards shorting during downside moves, whilst ensuring the asset is trading in a higher timeframe downtrend, and exiting after further downside. This script can work well on coins you are planning to hodl for long-term and works especially well whilst using an automated bot that can execute your trades for you. It allows you to hedge your investment by allocating a % of your coins to trade with, whilst not risking your entire holding. This mitigates unrealised losses from hodling as it provides additional cash from the profits made. You can then choose to hodl this cash, or use it to reinvest when the market reaches attractive buying levels. Alternatively, you can use this when trading contracts on futures markets where there is no need to already own the underlying asset prior to shorting it. ENTRY This script utilises the MACD indicator accompanied by the Exponential Moving Average (EMA) 450 to enter trades. The MACD is a trend following momentum indicator and provides identification of short-term trend direction. In this variation it utilises the 11-period as the fast and 26-period as the slow length EMAs, with signal smoothing set at 9. The EMA 450 is used as additional confirmation to prevent the script from shorting when price is above this long-term moving average. Once price is above the EMA 450 the script will not open any shorts - preventing the rule from attempting to short uptrends. Due to this, this strategy is ideal for setting and forgetting. The script will enter trades based on two conditions: 1) When the MACD signals a bearish cross. This occurs when the EMA 11 crosses below the EMA 26 within the MACD signalling the start of a potential downtrend. 2) Price has closed below the EMA 450. Price closing below this long-term EMA signals that the asset is in a sustained downtrend. Price breaking above this could indicate a bullish strength in which shorting would not be profitable. EXIT This script utilises a set take-profit and stop-loss from the entry of the trade. The take profit is set at 8% and the stop loss of 4%, providing a risk reward ratio of 2. This indicates the script will be profitable if it has a win ratio greater than 33%. Take-Profit Exit: -8% price decrease from entry price. OR Stop-Loss Exit: +4% price increase from entry price. Based on backtesting results across a selection of assets, the 45-minute and 1-hour timeframes are the best for this strategy. The strategy assumes each order is using 30% of the available coins to make the results more realistic and to simulate you only ran this strategy on 30% of your holdings. A trading fee of 0.1% is also taken into account and is aligned to the base fee applied on Binance. The backtesting data was recorded from December 1st 2021, just as the market was beginning its downtrend. We therefore recommend analysing the market conditions prior to utilising this strategy as it operates best on weak coins during downtrends and bearish conditions, however the EMA 450 condition should mitigate entries during bullish market conditions.
Pine Script® strategy
by Coinrule